Running as unit: rb-build-i386_8-48844.service ==================================================================================== Fri Nov 22 10:58:51 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job reproducible_builder_i386_8) on jenkins, called using "ionos16-i386 ionos12-i386" as arguments. Fri Nov 22 10:58:51 UTC 2024 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-krH90cyM" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Nov 22 10:58:51 UTC 2024 - checking /var/lib/jenkins/offline_nodes if ionos16-i386.debian.net is marked as down. Fri Nov 22 10:58:51 UTC 2024 - checking via ssh if ionos16-i386.debian.net is up. removed '/tmp/read-only-fs-test-OXXtFN' Fri Nov 22 10:58:51 UTC 2024 - checking /var/lib/jenkins/offline_nodes if ionos12-i386.debian.net is marked as down. Fri Nov 22 10:58:51 UTC 2024 - checking via ssh if ionos12-i386.debian.net is up. removed '/tmp/read-only-fs-test-sdbPpa' ok, let's check if libscalar-properties-perl is building anywhere yet… ok, libscalar-properties-perl is not building anywhere… UPDATE 1 ============================================================================= Initialising reproducibly build of libscalar-properties-perl in trixie on i386 on jenkins now. 1st build will be done on ionos16-i386.debian.net. 2nd build will be done on ionos12-i386.debian.net. ============================================================================= Fri Nov 22 10:59:06 UTC 2024 I: starting to build libscalar-properties-perl/trixie/i386 on jenkins on '2024-11-22 10:58' Fri Nov 22 10:59:06 UTC 2024 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_8/48844/console.log 1732273146 i386 trixie libscalar-properties-perl Fri Nov 22 10:59:06 UTC 2024 I: Downloading source for trixie/libscalar-properties-perl=1.100860-3 --2024-11-22 10:59:06-- http://deb.debian.org/debian/pool/main/libs/libscalar-properties-perl/libscalar-properties-perl_1.100860-3.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2476 (2.4K) [text/prs.lines.tag] Saving to: ‘libscalar-properties-perl_1.100860-3.dsc’ 0K .. 100% 217M=0s 2024-11-22 10:59:06 (217 MB/s) - ‘libscalar-properties-perl_1.100860-3.dsc’ saved [2476/2476] --2024-11-22 10:59:06-- http://deb.debian.org/debian/pool/main/libs/libscalar-properties-perl/libscalar-properties-perl_1.100860-3.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2476 (2.4K) [text/prs.lines.tag] Saving to: ‘libscalar-properties-perl_1.100860-3.dsc’ 0K .. 100% 217M=0s 2024-11-22 10:59:06 (217 MB/s) - ‘libscalar-properties-perl_1.100860-3.dsc’ saved [2476/2476] Fri Nov 22 10:59:06 UTC 2024 I: libscalar-properties-perl_1.100860-3.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libscalar-properties-perl Binary: libscalar-properties-perl Architecture: all Version: 1.100860-3 Maintainer: Debian Perl Group Uploaders: Dominic Hargreaves Homepage: https://metacpan.org/release/Scalar-Properties Standards-Version: 4.6.1 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libscalar-properties-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libscalar-properties-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13) Build-Depends-Indep: perl Package-List: libscalar-properties-perl deb perl optional arch=all Checksums-Sha1: f332816397d9c0edd6163d43c2822d5296a385d5 24994 libscalar-properties-perl_1.100860.orig.tar.gz bf72933910995394fc16e8b3fdeae646f4464aba 3056 libscalar-properties-perl_1.100860-3.debian.tar.xz Checksums-Sha256: d1a7010d7871d8abfe72d4c1cf72e33780a6ef0ebc6acb0d2e6a44b9933f0a92 24994 libscalar-properties-perl_1.100860.orig.tar.gz 5ad1659313a6146ad25709ab7befa1cce9bb6955484ac49c8dffef7e928edda4 3056 libscalar-properties-perl_1.100860-3.debian.tar.xz Files: 6f144203205f0a60026b82f32e51c595 24994 libscalar-properties-perl_1.100860.orig.tar.gz d91998c9e0f61f23ad27d0f01223ba7a 3056 libscalar-properties-perl_1.100860-3.debian.tar.xz Dgit: 5931738d4c28adde10421f7a81f8dbd78ffc6abd debian archive/debian/1.100860-3 https://git.dgit.debian.org/libscalar-properties-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAmLB6DlfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgYq6g//eLZaDY7IkincTIdALMhyQxb1V371Q5vQP2Z8caHcgkv6CIBWl03pZfjq ZqIbnJCLzqXSqh+4hOrpM8JnORV2JjrMOcNycNr+9I/UaL8JQ7s5XcDM7vg5gdQu NGqMslakonMh3gRmyK6lQZF5VxaTFDsr8bjyzEWzaitbBgZ8tOAfhFY8908r9zP6 AQhekwEJDTk0R9zZOzN0rYtaj/6Q6wN9mxHmDPOGULVpQoBJ1LnD5ZiYLK5iJZ8Q GScxl/KfZc5QzJ5TCSj5hbrweXWXlgx8crgpbqZlMReVJPRHZNBaxp/WMk6jt/fs CTfxO3kHetSnnJky7tOn87SySv10oy+Es2IW6v9mhiGhfWVAn4JDq+ImTw+5qjIS R0EqedzZuHrmuzkrhgRtbbG8rBNAClEew0Vf0ZH1AiGCB7P12w5I+7hfE2FZnNbO l2pYl3CxQcmslBg3LpvEcBWrkOD+bY0JqMSf3hcH+4fsnumpDangnmn+LJsKooMP U6AdHIfgF58q2yP5fwQ7FipehhbdtmIa14ju674z+rBGUYmTyohMdQs0zs4MCHc3 zCOG/Cu9A0FD37j8+CwjysAMyB0kRkWt5QhG6OVbO2ysfqbC4KJNK5/9WoUNoSJs P4HsEsRFnlgFO7o4WbirzB88uj1P3p3vil+cr11ZmRJ7y5e6NaE= =oU39 -----END PGP SIGNATURE----- Fri Nov 22 10:59:06 UTC 2024 I: Checking whether the package is not for us Fri Nov 22 10:59:06 UTC 2024 I: Starting 1st build on remote node ionos16-i386.debian.net. Fri Nov 22 10:59:06 UTC 2024 I: Preparing to do remote build '1' on ionos16-i386.debian.net. Fri Nov 22 10:59:06 UTC 2024 - checking /var/lib/jenkins/offline_nodes if ionos16-i386.debian.net is marked as down. Fri Nov 22 10:59:06 UTC 2024 - checking via ssh if ionos16-i386.debian.net is up. removed '/tmp/read-only-fs-test-0iYS0I' ==================================================================================== Thu Dec 25 17:22:07 UTC 2025 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos16-i386, called using "1 libscalar-properties-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj 1.100860-3" as arguments. Thu Dec 25 17:22:07 UTC 2025 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-QLBTpEf9" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Thu Dec 25 17:22:07 UTC 2025 I: Downloading source for trixie/libscalar-properties-perl=1.100860-3 Reading package lists... NOTICE: 'libscalar-properties-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libscalar-properties-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libscalar-properties-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 30.5 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libscalar-properties-perl 1.100860-3 (dsc) [2476 B] Get:2 http://deb.debian.org/debian trixie/main libscalar-properties-perl 1.100860-3 (tar) [25.0 kB] Get:3 http://deb.debian.org/debian trixie/main libscalar-properties-perl 1.100860-3 (diff) [3056 B] Fetched 30.5 kB in 0s (736 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libscalar-properties-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libscalar-properties-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libscalar-properties-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 30.5 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libscalar-properties-perl 1.100860-3 (dsc) [2476 B] Get:2 http://deb.debian.org/debian trixie/main libscalar-properties-perl 1.100860-3 (tar) [25.0 kB] Get:3 http://deb.debian.org/debian trixie/main libscalar-properties-perl 1.100860-3 (diff) [3056 B] Fetched 30.5 kB in 0s (736 kB/s) Download complete and in download only mode ============================================================================= Building libscalar-properties-perl in trixie on i386 on ionos16-i386 now. Date: Thu Dec 25 18:22:07 CET 2025 Date UTC: Thu Dec 25 17:22:07 UTC 2025 ============================================================================= W: /root/.pbuilderrc does not exist I: Logging to b1/build.log I: pbuilder: network access will be disabled during build I: Current time: Thu Dec 25 05:22:07 -12 2025 I: pbuilder-time-stamp: 1766683327 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libscalar-properties-perl_1.100860-3.dsc] I: copying [./libscalar-properties-perl_1.100860.orig.tar.gz] I: copying [./libscalar-properties-perl_1.100860-3.debian.tar.xz] I: Extracting source gpgv: Signature made Sun Jul 3 19:04:25 2022 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libscalar-properties-perl_1.100860-3.dsc: no acceptable signature found dpkg-source: info: extracting libscalar-properties-perl in libscalar-properties-perl-1.100860 dpkg-source: info: unpacking libscalar-properties-perl_1.100860.orig.tar.gz dpkg-source: info: unpacking libscalar-properties-perl_1.100860-3.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/48262/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=22 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='c803c97520774f9da51808039d9590e2' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='48262' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/pbuilderrc_PPRm --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/b1 --logfile b1/build.log libscalar-properties-perl_1.100860-3.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos16-i386 6.1.0-27-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.115-1 (2024-11-01) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/48262/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19956 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 29 newly installed, 0 to remove and 0 not upgraded. Need to get 20.1 MB of archives. After unpacking 75.7 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main i386 libmagic-mgc i386 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main i386 libmagic1t64 i386 1:5.45-3+b1 [115 kB] Get: 4 http://deb.debian.org/debian trixie/main i386 file i386 1:5.45-3+b1 [43.2 kB] Get: 5 http://deb.debian.org/debian trixie/main i386 gettext-base i386 0.22.5-2 [201 kB] Get: 6 http://deb.debian.org/debian trixie/main i386 libuchardet0 i386 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main i386 groff-base i386 1.23.0-5 [1196 kB] Get: 8 http://deb.debian.org/debian trixie/main i386 bsdextrautils i386 2.40.2-11 [95.6 kB] Get: 9 http://deb.debian.org/debian trixie/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 10 http://deb.debian.org/debian trixie/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 11 http://deb.debian.org/debian trixie/main i386 m4 i386 1.4.19-4 [293 kB] Get: 12 http://deb.debian.org/debian trixie/main i386 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main i386 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main i386 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main i386 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main i386 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main i386 libtool all 2.4.7-8 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main i386 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main i386 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main i386 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main i386 libelf1t64 i386 0.192-4 [195 kB] Get: 23 http://deb.debian.org/debian trixie/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 24 http://deb.debian.org/debian trixie/main i386 libicu72 i386 72.1-5+b1 [9583 kB] Get: 25 http://deb.debian.org/debian trixie/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.2+b1 [734 kB] Get: 26 http://deb.debian.org/debian trixie/main i386 gettext i386 0.22.5-2 [1631 kB] Get: 27 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 debhelper all 13.20 [915 kB] Fetched 20.1 MB in 0s (92.6 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19956 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic1t64:i386 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_i386.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_i386.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_i386.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-11_i386.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../08-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_i386.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../21-libelf1t64_0.192-4_i386.deb ... Unpacking libelf1t64:i386 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:i386. Preparing to unpack .../23-libicu72_72.1-5+b1_i386.deb ... Unpacking libicu72:i386 (72.1-5+b1) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_i386.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up libicu72:i386 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:i386 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:i386 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b2) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libscalar-properties-perl-1.100860/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libscalar-properties-perl_1.100860-3_source.changes dpkg-buildpackage: info: source package libscalar-properties-perl dpkg-buildpackage: info: source version 1.100860-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libscalar-properties-perl-1.100860=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libscalar-properties-perl-1.100860=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Scalar::Properties Writing MYMETA.yml and MYMETA.json dh_auto_build make -j22 make[1]: Entering directory '/build/reproducible-path/libscalar-properties-perl-1.100860' cp lib/Scalar/Properties.pm blib/lib/Scalar/Properties.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libscalar-properties-perl-1.100860' dh_auto_test make -j22 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libscalar-properties-perl-1.100860' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ............... 1..1 ok 1 - Scalar::Properties loaded ok ok # Testing with Perl 5.040000, /usr/bin/perl # Carp version is 1.54 # English version is 1.11 # ExtUtils::MakeMaker version is 7.70 # File::Find version is 1.44 # File::Temp version is 0.2311 # Scalar::Util version is 1.63 # Test::More version is 1.302199 # overload version is 1.37 t/000-report-versions.t ...... ok 1 - use Carp; ok 2 - use English; ok 3 - use ExtUtils::MakeMaker; ok 4 - use File::Find; ok 5 - use File::Temp; ok 6 - use Scalar::Util; ok 7 - use Test::More; ok 8 - use overload; 1..8 ok t/01_all.t ................... 1..151 ok 1 ok 2 binary-op operand re-ordering bug ok 3 variable interpolation bug ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 ok 48 ok 49 ok 50 ok 51 ok 52 ok 53 ok 54 ok 55 ok 56 ok 57 ok 58 ok 59 ok 60 ok 61 ok 62 ok 63 ok 64 ok 65 ok 66 ok 67 ok 68 ok 69 ok 70 ok 71 ok 72 ok 73 ok 74 ok 75 ok 76 ok 77 ok 78 ok 79 ok 80 ok 81 ok 82 ok 83 hELLO wORLD ok 84 ok 85 ok 86 ok 87 ok 88 ok 89 ok 90 ok 91 ok 92 ok 93 ok 94 ok 95 ok 96 ok 97 ok 98 ok 99 ok 100 ok 101 ok 102 ok 103 ok 104 ok 105 ok 106 ok 107 ok 108 ok 109 ok 110 ok 111 ok 112 ok 113 ok 114 ok 115 ok 116 ok 117 ok 118 ok 119 ok 120 ok 121 ok 122 ok 123 ok 124 ok 125 ok 126 ok 127 ok 128 ok 129 ok 130 ok 131 ok 132 ok 133 ok 134 ok 135 ok 136 ok 137 ok 138 ok 139 ok 140 ok 141 ok 142 ok 143 ok 144 class ok 145 class ok 146 class ok 147 ok 148 ok 149 class ok 150 class ok 151 ok t/author-critic.t ............ skipped: these tests are for testing by the author t/release-check-changes.t .... skipped: these tests are for release candidate testing t/release-dist-manifest.t .... skipped: these tests are for release candidate testing t/release-has-version.t ...... skipped: these tests are for release candidate testing t/release-kwalitee.t ......... skipped: these tests are for release candidate testing t/release-meta-yaml.t ........ skipped: these tests are for release candidate testing t/release-minimum-version.t .. skipped: these tests are for release candidate testing t/release-pod-coverage.t ..... skipped: these tests are for release candidate testing t/release-pod-spell.t ........ skipped: these tests are for release candidate testing t/release-pod-syntax.t ....... skipped: these tests are for release candidate testing t/release-portability.t ...... skipped: these tests are for release candidate testing t/release-synopsis.t ......... skipped: these tests are for release candidate testing All tests successful. Files=15, Tests=160, 1 wallclock secs ( 0.06 usr 0.00 sys + 0.86 cusr 0.12 csys = 1.04 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libscalar-properties-perl-1.100860' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libscalar-properties-perl/ make -j22 install DESTDIR=/build/reproducible-path/libscalar-properties-perl-1.100860/debian/libscalar-properties-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libscalar-properties-perl-1.100860' Manifying 1 pod document Installing /build/reproducible-path/libscalar-properties-perl-1.100860/debian/libscalar-properties-perl/usr/share/perl5/Scalar/Properties.pm Installing /build/reproducible-path/libscalar-properties-perl-1.100860/debian/libscalar-properties-perl/usr/share/man/man3/Scalar::Properties.3pm make[1]: Leaving directory '/build/reproducible-path/libscalar-properties-perl-1.100860' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libscalar-properties-perl' in '../libscalar-properties-perl_1.100860-3_all.deb'. dpkg-genbuildinfo --build=binary -O../libscalar-properties-perl_1.100860-3_i386.buildinfo dpkg-genchanges --build=binary -O../libscalar-properties-perl_1.100860-3_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/48262 and its subdirectories I: Current time: Thu Dec 25 05:22:32 -12 2025 I: pbuilder-time-stamp: 1766683352 Thu Dec 25 17:22:32 UTC 2025 I: Signing ./b1/libscalar-properties-perl_1.100860-3_i386.buildinfo as libscalar-properties-perl_1.100860-3_i386.buildinfo.asc Thu Dec 25 17:22:32 UTC 2025 I: Signed ./b1/libscalar-properties-perl_1.100860-3_i386.buildinfo as ./b1/libscalar-properties-perl_1.100860-3_i386.buildinfo.asc Thu Dec 25 17:22:32 UTC 2025 - build #1 for libscalar-properties-perl/trixie/i386 on ionos16-i386 done. Starting cleanup. All cleanup done. Thu Dec 25 17:22:32 UTC 2025 - reproducible_build.sh stopped running as /tmp/jenkins-script-QLBTpEf9, removing. /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj: total 16 drwxr-xr-x 2 jenkins jenkins 4096 Nov 22 10:59 b1 drwxr-xr-x 2 jenkins jenkins 4096 Nov 22 10:59 b2 -rw-r--r-- 1 jenkins jenkins 2476 Jul 3 2022 libscalar-properties-perl_1.100860-3.dsc -rw------- 1 jenkins jenkins 3713 Nov 22 10:59 rbuildlog.wsVPHSJ /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/b1: total 72 -rw-r--r-- 1 jenkins jenkins 22345 Nov 22 10:59 build.log -rw-r--r-- 1 jenkins jenkins 3056 Nov 22 10:59 libscalar-properties-perl_1.100860-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2476 Nov 22 10:59 libscalar-properties-perl_1.100860-3.dsc -rw-r--r-- 1 jenkins jenkins 14328 Nov 22 10:59 libscalar-properties-perl_1.100860-3_all.deb -rw-r--r-- 1 jenkins jenkins 4729 Nov 22 10:59 libscalar-properties-perl_1.100860-3_i386.buildinfo -rw-r--r-- 1 jenkins jenkins 5611 Nov 22 10:59 libscalar-properties-perl_1.100860-3_i386.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1380 Nov 22 10:59 libscalar-properties-perl_1.100860-3_i386.changes -rw-r--r-- 1 jenkins jenkins 1557 Nov 22 10:59 libscalar-properties-perl_1.100860-3_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/b2: total 0 Fri Nov 22 10:59:33 UTC 2024 I: Deleting $TMPDIR on ionos16-i386.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu Dec 25 05:22:07 -12 2025 I: pbuilder-time-stamp: 1766683327 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libscalar-properties-perl_1.100860-3.dsc] I: copying [./libscalar-properties-perl_1.100860.orig.tar.gz] I: copying [./libscalar-properties-perl_1.100860-3.debian.tar.xz] I: Extracting source gpgv: Signature made Sun Jul 3 19:04:25 2022 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libscalar-properties-perl_1.100860-3.dsc: no acceptable signature found dpkg-source: info: extracting libscalar-properties-perl in libscalar-properties-perl-1.100860 dpkg-source: info: unpacking libscalar-properties-perl_1.100860.orig.tar.gz dpkg-source: info: unpacking libscalar-properties-perl_1.100860-3.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/48262/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=22 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='c803c97520774f9da51808039d9590e2' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='48262' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/pbuilderrc_PPRm --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/b1 --logfile b1/build.log libscalar-properties-perl_1.100860-3.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://213.165.73.152:3128' I: uname -a Linux ionos16-i386 6.1.0-27-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.115-1 (2024-11-01) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin I: user script /srv/workspace/pbuilder/48262/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19956 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 29 newly installed, 0 to remove and 0 not upgraded. Need to get 20.1 MB of archives. After unpacking 75.7 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main i386 libmagic-mgc i386 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main i386 libmagic1t64 i386 1:5.45-3+b1 [115 kB] Get: 4 http://deb.debian.org/debian trixie/main i386 file i386 1:5.45-3+b1 [43.2 kB] Get: 5 http://deb.debian.org/debian trixie/main i386 gettext-base i386 0.22.5-2 [201 kB] Get: 6 http://deb.debian.org/debian trixie/main i386 libuchardet0 i386 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main i386 groff-base i386 1.23.0-5 [1196 kB] Get: 8 http://deb.debian.org/debian trixie/main i386 bsdextrautils i386 2.40.2-11 [95.6 kB] Get: 9 http://deb.debian.org/debian trixie/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 10 http://deb.debian.org/debian trixie/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 11 http://deb.debian.org/debian trixie/main i386 m4 i386 1.4.19-4 [293 kB] Get: 12 http://deb.debian.org/debian trixie/main i386 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main i386 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main i386 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main i386 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main i386 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main i386 libtool all 2.4.7-8 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main i386 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main i386 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main i386 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main i386 libelf1t64 i386 0.192-4 [195 kB] Get: 23 http://deb.debian.org/debian trixie/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 24 http://deb.debian.org/debian trixie/main i386 libicu72 i386 72.1-5+b1 [9583 kB] Get: 25 http://deb.debian.org/debian trixie/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.2+b1 [734 kB] Get: 26 http://deb.debian.org/debian trixie/main i386 gettext i386 0.22.5-2 [1631 kB] Get: 27 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 debhelper all 13.20 [915 kB] Fetched 20.1 MB in 0s (92.6 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19956 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic1t64:i386 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_i386.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_i386.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_i386.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-11_i386.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../08-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_i386.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../21-libelf1t64_0.192-4_i386.deb ... Unpacking libelf1t64:i386 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:i386. Preparing to unpack .../23-libicu72_72.1-5+b1_i386.deb ... Unpacking libicu72:i386 (72.1-5+b1) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_i386.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up libicu72:i386 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:i386 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:i386 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b2) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libscalar-properties-perl-1.100860/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libscalar-properties-perl_1.100860-3_source.changes dpkg-buildpackage: info: source package libscalar-properties-perl dpkg-buildpackage: info: source version 1.100860-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libscalar-properties-perl-1.100860=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libscalar-properties-perl-1.100860=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Scalar::Properties Writing MYMETA.yml and MYMETA.json dh_auto_build make -j22 make[1]: Entering directory '/build/reproducible-path/libscalar-properties-perl-1.100860' cp lib/Scalar/Properties.pm blib/lib/Scalar/Properties.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libscalar-properties-perl-1.100860' dh_auto_test make -j22 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libscalar-properties-perl-1.100860' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ............... 1..1 ok 1 - Scalar::Properties loaded ok ok # Testing with Perl 5.040000, /usr/bin/perl # Carp version is 1.54 # English version is 1.11 # ExtUtils::MakeMaker version is 7.70 # File::Find version is 1.44 # File::Temp version is 0.2311 # Scalar::Util version is 1.63 # Test::More version is 1.302199 # overload version is 1.37 t/000-report-versions.t ...... ok 1 - use Carp; ok 2 - use English; ok 3 - use ExtUtils::MakeMaker; ok 4 - use File::Find; ok 5 - use File::Temp; ok 6 - use Scalar::Util; ok 7 - use Test::More; ok 8 - use overload; 1..8 ok t/01_all.t ................... 1..151 ok 1 ok 2 binary-op operand re-ordering bug ok 3 variable interpolation bug ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 ok 48 ok 49 ok 50 ok 51 ok 52 ok 53 ok 54 ok 55 ok 56 ok 57 ok 58 ok 59 ok 60 ok 61 ok 62 ok 63 ok 64 ok 65 ok 66 ok 67 ok 68 ok 69 ok 70 ok 71 ok 72 ok 73 ok 74 ok 75 ok 76 ok 77 ok 78 ok 79 ok 80 ok 81 ok 82 ok 83 hELLO wORLD ok 84 ok 85 ok 86 ok 87 ok 88 ok 89 ok 90 ok 91 ok 92 ok 93 ok 94 ok 95 ok 96 ok 97 ok 98 ok 99 ok 100 ok 101 ok 102 ok 103 ok 104 ok 105 ok 106 ok 107 ok 108 ok 109 ok 110 ok 111 ok 112 ok 113 ok 114 ok 115 ok 116 ok 117 ok 118 ok 119 ok 120 ok 121 ok 122 ok 123 ok 124 ok 125 ok 126 ok 127 ok 128 ok 129 ok 130 ok 131 ok 132 ok 133 ok 134 ok 135 ok 136 ok 137 ok 138 ok 139 ok 140 ok 141 ok 142 ok 143 ok 144 class ok 145 class ok 146 class ok 147 ok 148 ok 149 class ok 150 class ok 151 ok t/author-critic.t ............ skipped: these tests are for testing by the author t/release-check-changes.t .... skipped: these tests are for release candidate testing t/release-dist-manifest.t .... skipped: these tests are for release candidate testing t/release-has-version.t ...... skipped: these tests are for release candidate testing t/release-kwalitee.t ......... skipped: these tests are for release candidate testing t/release-meta-yaml.t ........ skipped: these tests are for release candidate testing t/release-minimum-version.t .. skipped: these tests are for release candidate testing t/release-pod-coverage.t ..... skipped: these tests are for release candidate testing t/release-pod-spell.t ........ skipped: these tests are for release candidate testing t/release-pod-syntax.t ....... skipped: these tests are for release candidate testing t/release-portability.t ...... skipped: these tests are for release candidate testing t/release-synopsis.t ......... skipped: these tests are for release candidate testing All tests successful. Files=15, Tests=160, 1 wallclock secs ( 0.06 usr 0.00 sys + 0.86 cusr 0.12 csys = 1.04 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libscalar-properties-perl-1.100860' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libscalar-properties-perl/ make -j22 install DESTDIR=/build/reproducible-path/libscalar-properties-perl-1.100860/debian/libscalar-properties-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libscalar-properties-perl-1.100860' Manifying 1 pod document Installing /build/reproducible-path/libscalar-properties-perl-1.100860/debian/libscalar-properties-perl/usr/share/perl5/Scalar/Properties.pm Installing /build/reproducible-path/libscalar-properties-perl-1.100860/debian/libscalar-properties-perl/usr/share/man/man3/Scalar::Properties.3pm make[1]: Leaving directory '/build/reproducible-path/libscalar-properties-perl-1.100860' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libscalar-properties-perl' in '../libscalar-properties-perl_1.100860-3_all.deb'. dpkg-genbuildinfo --build=binary -O../libscalar-properties-perl_1.100860-3_i386.buildinfo dpkg-genchanges --build=binary -O../libscalar-properties-perl_1.100860-3_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/48262 and its subdirectories I: Current time: Thu Dec 25 05:22:32 -12 2025 I: pbuilder-time-stamp: 1766683352 Fri Nov 22 10:59:33 UTC 2024 I: 1st build successful. Starting 2nd build on remote node ionos12-i386.debian.net. Fri Nov 22 10:59:33 UTC 2024 I: Preparing to do remote build '2' on ionos12-i386.debian.net. Fri Nov 22 10:59:33 UTC 2024 - checking /var/lib/jenkins/offline_nodes if ionos12-i386.debian.net is marked as down. Fri Nov 22 10:59:33 UTC 2024 - checking via ssh if ionos12-i386.debian.net is up. removed '/tmp/read-only-fs-test-wIG6YS' ==================================================================================== Fri Nov 22 10:59:34 UTC 2024 - running /srv/jenkins/bin/reproducible_build.sh (for job /srv/jenkins/bin/reproducible_build.sh) on ionos12-i386, called using "2 libscalar-properties-perl trixie /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj 1.100860-3" as arguments. Fri Nov 22 10:59:34 UTC 2024 - actually running "reproducible_build.sh" (md5sum 68e686e434c9ab7bc3ec047d8b309cbc) as "/tmp/jenkins-script-APrto5Rt" $ git clone https://salsa.debian.org/qa/jenkins.debian.net.git ; more CONTRIBUTING Fri Nov 22 10:59:35 UTC 2024 I: Downloading source for trixie/libscalar-properties-perl=1.100860-3 Reading package lists... NOTICE: 'libscalar-properties-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libscalar-properties-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libscalar-properties-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 30.5 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libscalar-properties-perl 1.100860-3 (dsc) [2476 B] Get:2 http://deb.debian.org/debian trixie/main libscalar-properties-perl 1.100860-3 (tar) [25.0 kB] Get:3 http://deb.debian.org/debian trixie/main libscalar-properties-perl 1.100860-3 (diff) [3056 B] Fetched 30.5 kB in 0s (1062 kB/s) Download complete and in download only mode Reading package lists... NOTICE: 'libscalar-properties-perl' packaging is maintained in the 'Git' version control system at: https://salsa.debian.org/perl-team/modules/packages/libscalar-properties-perl.git Please use: git clone https://salsa.debian.org/perl-team/modules/packages/libscalar-properties-perl.git to retrieve the latest (possibly unreleased) updates to the package. Need to get 30.5 kB of source archives. Get:1 http://deb.debian.org/debian trixie/main libscalar-properties-perl 1.100860-3 (dsc) [2476 B] Get:2 http://deb.debian.org/debian trixie/main libscalar-properties-perl 1.100860-3 (tar) [25.0 kB] Get:3 http://deb.debian.org/debian trixie/main libscalar-properties-perl 1.100860-3 (diff) [3056 B] Fetched 30.5 kB in 0s (1062 kB/s) Download complete and in download only mode ============================================================================= Re-Building libscalar-properties-perl in trixie on i386 on ionos12-i386 now. Date: Fri Nov 22 11:59:35 CET 2024 Date UTC: Fri Nov 22 10:59:35 UTC 2024 ============================================================================= ++ mktemp -t pbuilderrc_XXXX --tmpdir=/srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj + local TMPCFG=/srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/pbuilderrc_46Aj + case ${ARCH} in + let NUM_CPU-=3 + case $ARCH in + locale=de_CH + language=de + case "${SUITE}" in + reproducible_buildflags=+all + extra_deb_build_options= + case "${SRCPACKAGE}" in + cat + echo BUILDDIR=/build/reproducible-path + '[' libscalar-properties-perl = debian-installer -o libscalar-properties-perl = debian-installer-netboot-images ']' + pbuilder_options=() + local pbuilder_options + DEBBUILDOPTS=-b + BINARYTARGET= + '[' libscalar-properties-perl = u-boot ']' + case "${SRCPACKAGE}" in + PBUILDERTIMEOUT=24 + local PRESULT=0 + sudo timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/pbuilderrc_46Aj --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/b2 --logfile b2/build.log libscalar-properties-perl_1.100860-3.dsc W: /root/.pbuilderrc does not exist I: Logging to b2/build.log I: pbuilder: network access will be disabled during build I: Current time: Sat Nov 23 00:59:35 +14 2024 I: pbuilder-time-stamp: 1732273175 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libscalar-properties-perl_1.100860-3.dsc] I: copying [./libscalar-properties-perl_1.100860.orig.tar.gz] I: copying [./libscalar-properties-perl_1.100860-3.debian.tar.xz] I: Extracting source gpgv: Signature made Sun Jul 3 19:04:25 2022 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libscalar-properties-perl_1.100860-3.dsc: no acceptable signature found dpkg-source: info: extracting libscalar-properties-perl in libscalar-properties-perl-1.100860 dpkg-source: info: unpacking libscalar-properties-perl_1.100860.orig.tar.gz dpkg-source: info: unpacking libscalar-properties-perl_1.100860-3.debian.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/36482/tmp/hooks/D01_modify_environment starting debug: Running on ionos12-i386. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Nov 22 10:59 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/36482/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/36482/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="i686-pc-linux-gnu") BASH_VERSION='5.2.32(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=i386 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=10 ' DIRSTACK=() DISTRIBUTION=trixie EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=i686 HOST_ARCH=i386 IFS=' ' INVOCATION_ID=d333e39e667c4584826c6c55e2d1b02b LANG=C LANGUAGE=de_CH:de LC_ALL=C LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so MACHTYPE=i686-pc-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=36482 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/pbuilderrc_46Aj --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/b2 --logfile b2/build.log libscalar-properties-perl_1.100860-3.dsc' SUDO_GID=112 SUDO_UID=107 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://46.16.76.132:3128 I: uname -a Linux i-capture-the-hostname 6.1.0-27-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.115-1 (2024-11-01) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/36482/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19956 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 29 newly installed, 0 to remove and 0 not upgraded. Need to get 20.1 MB of archives. After unpacking 75.7 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main i386 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main i386 libmagic-mgc i386 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main i386 libmagic1t64 i386 1:5.45-3+b1 [115 kB] Get: 4 http://deb.debian.org/debian trixie/main i386 file i386 1:5.45-3+b1 [43.2 kB] Get: 5 http://deb.debian.org/debian trixie/main i386 gettext-base i386 0.22.5-2 [201 kB] Get: 6 http://deb.debian.org/debian trixie/main i386 libuchardet0 i386 0.0.8-1+b2 [69.2 kB] Get: 7 http://deb.debian.org/debian trixie/main i386 groff-base i386 1.23.0-5 [1196 kB] Get: 8 http://deb.debian.org/debian trixie/main i386 bsdextrautils i386 2.40.2-11 [95.6 kB] Get: 9 http://deb.debian.org/debian trixie/main i386 libpipeline1 i386 1.5.8-1 [41.2 kB] Get: 10 http://deb.debian.org/debian trixie/main i386 man-db i386 2.13.0-1 [1428 kB] Get: 11 http://deb.debian.org/debian trixie/main i386 m4 i386 1.4.19-4 [293 kB] Get: 12 http://deb.debian.org/debian trixie/main i386 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main i386 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main i386 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian trixie/main i386 autopoint all 0.22.5-2 [723 kB] Get: 16 http://deb.debian.org/debian trixie/main i386 libdebhelper-perl all 13.20 [89.7 kB] Get: 17 http://deb.debian.org/debian trixie/main i386 libtool all 2.4.7-8 [517 kB] Get: 18 http://deb.debian.org/debian trixie/main i386 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main i386 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main i386 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get: 21 http://deb.debian.org/debian trixie/main i386 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get: 22 http://deb.debian.org/debian trixie/main i386 libelf1t64 i386 0.192-4 [195 kB] Get: 23 http://deb.debian.org/debian trixie/main i386 dwz i386 0.15-1+b1 [116 kB] Get: 24 http://deb.debian.org/debian trixie/main i386 libicu72 i386 72.1-5+b1 [9583 kB] Get: 25 http://deb.debian.org/debian trixie/main i386 libxml2 i386 2.12.7+dfsg+really2.9.14-0.2+b1 [734 kB] Get: 26 http://deb.debian.org/debian trixie/main i386 gettext i386 0.22.5-2 [1631 kB] Get: 27 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 debhelper all 13.20 [915 kB] Fetched 20.1 MB in 1s (33.2 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19956 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:i386. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_i386.deb ... Unpacking libmagic1t64:i386 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_i386.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_i386.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_i386.deb ... Unpacking libuchardet0:i386 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_i386.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-11_i386.deb ... Unpacking bsdextrautils (2.40.2-11) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../08-libpipeline1_1.5.8-1_i386.deb ... Unpacking libpipeline1:i386 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_i386.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_i386.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-8_all.deb ... Unpacking libtool (2.4.7-8) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:i386. Preparing to unpack .../21-libelf1t64_0.192-4_i386.deb ... Unpacking libelf1t64:i386 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_i386.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:i386. Preparing to unpack .../23-libicu72_72.1-5+b1_i386.deb ... Unpacking libicu72:i386 (72.1-5+b1) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_i386.deb ... Unpacking libxml2:i386 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_i386.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Setting up libpipeline1:i386 (1.5.8-1) ... Setting up libicu72:i386 (72.1-5+b1) ... Setting up bsdextrautils (2.40.2-11) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:i386 (1:5.45-3+b1) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:i386 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:i386 (0.0.8-1+b2) ... Setting up libxml2:i386 (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-8) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: user script /srv/workspace/pbuilder/36482/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for trixie I: user script /srv/workspace/pbuilder/36482/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libscalar-properties-perl-1.100860/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libscalar-properties-perl_1.100860-3_source.changes dpkg-buildpackage: info: source package libscalar-properties-perl dpkg-buildpackage: info: source version 1.100860-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libscalar-properties-perl-1.100860=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libscalar-properties-perl-1.100860=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Scalar::Properties Writing MYMETA.yml and MYMETA.json dh_auto_build make -j10 make[1]: Entering directory '/build/reproducible-path/libscalar-properties-perl-1.100860' cp lib/Scalar/Properties.pm blib/lib/Scalar/Properties.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libscalar-properties-perl-1.100860' dh_auto_test make -j10 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libscalar-properties-perl-1.100860' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ............... 1..1 ok 1 - Scalar::Properties loaded ok ok # Testing with Perl 5.040000, /usr/bin/perl # Carp version is 1.54 # English version is 1.11 # ExtUtils::MakeMaker version is 7.70 # File::Find version is 1.44 # File::Temp version is 0.2311 # Scalar::Util version is 1.63 # Test::More version is 1.302199 # overload version is 1.37 t/000-report-versions.t ...... ok 1 - use Carp; ok 2 - use English; ok 3 - use ExtUtils::MakeMaker; ok 4 - use File::Find; ok 5 - use File::Temp; ok 6 - use Scalar::Util; ok 7 - use Test::More; ok 8 - use overload; 1..8 ok t/01_all.t ................... 1..151 ok 1 ok 2 binary-op operand re-ordering bug ok 3 variable interpolation bug ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 ok 30 ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 ok 48 ok 49 ok 50 ok 51 ok 52 ok 53 ok 54 ok 55 ok 56 ok 57 ok 58 ok 59 ok 60 ok 61 ok 62 ok 63 ok 64 ok 65 ok 66 ok 67 ok 68 ok 69 ok 70 ok 71 ok 72 ok 73 ok 74 ok 75 ok 76 ok 77 ok 78 ok 79 ok 80 ok 81 ok 82 ok 83 hELLO wORLD ok 84 ok 85 ok 86 ok 87 ok 88 ok 89 ok 90 ok 91 ok 92 ok 93 ok 94 ok 95 ok 96 ok 97 ok 98 ok 99 ok 100 ok 101 ok 102 ok 103 ok 104 ok 105 ok 106 ok 107 ok 108 ok 109 ok 110 ok 111 ok 112 ok 113 ok 114 ok 115 ok 116 ok 117 ok 118 ok 119 ok 120 ok 121 ok 122 ok 123 ok 124 ok 125 ok 126 ok 127 ok 128 ok 129 ok 130 ok 131 ok 132 ok 133 ok 134 ok 135 ok 136 ok 137 ok 138 ok 139 ok 140 ok 141 ok 142 ok 143 ok 144 quadrant ok 145 quadrant ok 146 quadrant ok 147 ok 148 ok 149 class ok 150 class ok 151 ok t/author-critic.t ............ skipped: these tests are for testing by the author t/release-check-changes.t .... skipped: these tests are for release candidate testing t/release-dist-manifest.t .... skipped: these tests are for release candidate testing t/release-has-version.t ...... skipped: these tests are for release candidate testing t/release-kwalitee.t ......... skipped: these tests are for release candidate testing t/release-meta-yaml.t ........ skipped: these tests are for release candidate testing t/release-minimum-version.t .. skipped: these tests are for release candidate testing t/release-pod-coverage.t ..... skipped: these tests are for release candidate testing t/release-pod-spell.t ........ skipped: these tests are for release candidate testing t/release-pod-syntax.t ....... skipped: these tests are for release candidate testing t/release-portability.t ...... skipped: these tests are for release candidate testing t/release-synopsis.t ......... skipped: these tests are for release candidate testing All tests successful. Files=15, Tests=160, 2 wallclock secs ( 0.08 usr 0.04 sys + 1.86 cusr 0.36 csys = 2.34 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libscalar-properties-perl-1.100860' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libscalar-properties-perl/ make -j10 install DESTDIR=/build/reproducible-path/libscalar-properties-perl-1.100860/debian/libscalar-properties-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libscalar-properties-perl-1.100860' Manifying 1 pod document Installing /build/reproducible-path/libscalar-properties-perl-1.100860/debian/libscalar-properties-perl/usr/share/perl5/Scalar/Properties.pm Installing /build/reproducible-path/libscalar-properties-perl-1.100860/debian/libscalar-properties-perl/usr/share/man/man3/Scalar::Properties.3pm make[1]: Leaving directory '/build/reproducible-path/libscalar-properties-perl-1.100860' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libscalar-properties-perl' in '../libscalar-properties-perl_1.100860-3_all.deb'. dpkg-genbuildinfo --build=binary -O../libscalar-properties-perl_1.100860-3_i386.buildinfo dpkg-genchanges --build=binary -O../libscalar-properties-perl_1.100860-3_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/36482/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/36482/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/36482 and its subdirectories I: Current time: Sat Nov 23 01:00:25 +14 2024 I: pbuilder-time-stamp: 1732273225 + false + set +x Fri Nov 22 11:00:25 UTC 2024 I: Signing ./b2/libscalar-properties-perl_1.100860-3_i386.buildinfo as libscalar-properties-perl_1.100860-3_i386.buildinfo.asc Fri Nov 22 11:00:25 UTC 2024 I: Signed ./b2/libscalar-properties-perl_1.100860-3_i386.buildinfo as ./b2/libscalar-properties-perl_1.100860-3_i386.buildinfo.asc Fri Nov 22 11:00:25 UTC 2024 - build #2 for libscalar-properties-perl/trixie/i386 on ionos12-i386 done. Starting cleanup. All cleanup done. Fri Nov 22 11:00:25 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-APrto5Rt, removing. /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj: total 40 drwxr-xr-x 2 jenkins jenkins 4096 Nov 22 10:59 b1 drwxr-xr-x 2 jenkins jenkins 4096 Nov 22 11:00 b2 -rw-r--r-- 1 jenkins jenkins 2476 Jul 3 2022 libscalar-properties-perl_1.100860-3.dsc -rw------- 1 jenkins jenkins 26344 Nov 22 10:59 rbuildlog.wsVPHSJ /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/b1: total 72 -rw-r--r-- 1 jenkins jenkins 22345 Nov 22 10:59 build.log -rw-r--r-- 1 jenkins jenkins 3056 Nov 22 10:59 libscalar-properties-perl_1.100860-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2476 Nov 22 10:59 libscalar-properties-perl_1.100860-3.dsc -rw-r--r-- 1 jenkins jenkins 14328 Nov 22 10:59 libscalar-properties-perl_1.100860-3_all.deb -rw-r--r-- 1 jenkins jenkins 4729 Nov 22 10:59 libscalar-properties-perl_1.100860-3_i386.buildinfo -rw-r--r-- 1 jenkins jenkins 5611 Nov 22 10:59 libscalar-properties-perl_1.100860-3_i386.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1380 Nov 22 10:59 libscalar-properties-perl_1.100860-3_i386.changes -rw-r--r-- 1 jenkins jenkins 1557 Nov 22 10:59 libscalar-properties-perl_1.100860-3_source.changes /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/b2: total 72 -rw-r--r-- 1 jenkins jenkins 24260 Nov 22 11:00 build.log -rw-r--r-- 1 jenkins jenkins 3056 Nov 22 11:00 libscalar-properties-perl_1.100860-3.debian.tar.xz -rw-r--r-- 1 jenkins jenkins 2476 Nov 22 11:00 libscalar-properties-perl_1.100860-3.dsc -rw-r--r-- 1 jenkins jenkins 14328 Nov 22 11:00 libscalar-properties-perl_1.100860-3_all.deb -rw-r--r-- 1 jenkins jenkins 4729 Nov 22 11:00 libscalar-properties-perl_1.100860-3_i386.buildinfo -rw-r--r-- 1 jenkins jenkins 5611 Nov 22 11:00 libscalar-properties-perl_1.100860-3_i386.buildinfo.asc -rw-r--r-- 1 jenkins jenkins 1380 Nov 22 11:00 libscalar-properties-perl_1.100860-3_i386.changes -rw-r--r-- 1 jenkins jenkins 1557 Nov 22 11:00 libscalar-properties-perl_1.100860-3_source.changes Fri Nov 22 11:00:25 UTC 2024 I: Deleting $TMPDIR on ionos12-i386.debian.net. Fri Nov 22 11:00:26 UTC 2024 I: libscalar-properties-perl_1.100860-3_i386.changes: Format: 1.8 Date: Sun, 03 Jul 2022 21:02:50 +0200 Source: libscalar-properties-perl Binary: libscalar-properties-perl Architecture: all Version: 1.100860-3 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libscalar-properties-perl - perl module to add run-time properties on scalar variables Changes: libscalar-properties-perl (1.100860-3) unstable; urgency=medium . * Team upload. * Update debian/upstream/metadata. * autopkgtests: skip use.t. * Declare compliance with Debian Policy 4.6.1. * Set Rules-Requires-Root: no. * Bump debhelper-compat to 13. Checksums-Sha1: 63e54398eff8cad8bcc599a7023ad24aed7f6b36 14328 libscalar-properties-perl_1.100860-3_all.deb b485dd53f8d80a3f38ab745fa9a8cf23c50c7e1b 4729 libscalar-properties-perl_1.100860-3_i386.buildinfo Checksums-Sha256: 59a536b5d51137f6133081ecdfea561ca6aa9b371adc762f4894469508c46074 14328 libscalar-properties-perl_1.100860-3_all.deb adfac4be5b37c2bae42ef8b2d1bbd4d0302a794e512ef3467b233c5fa98837e2 4729 libscalar-properties-perl_1.100860-3_i386.buildinfo Files: 51ca02fc2ddccd2b4faa6e448e434a1b 14328 perl optional libscalar-properties-perl_1.100860-3_all.deb c83f8cbbca7e605304445df102866a89 4729 perl optional libscalar-properties-perl_1.100860-3_i386.buildinfo removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/i386/libscalar-properties-perl_1.100860-3.rbuild.log' removed '/var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/i386/libscalar-properties-perl_1.100860-3.rbuild.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/i386/libscalar-properties-perl_1.100860-3.build1.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/logs/trixie/i386/libscalar-properties-perl_1.100860-3.build2.log.gz' removed '/var/lib/jenkins/userContent/reproducible/debian/buildinfo/trixie/i386/libscalar-properties-perl_1.100860-3_i386.buildinfo' removed '/var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/i386/libscalar-properties-perl_1.100860-3.diff.gz' Diff of the two buildlogs: -- --- b1/build.log 2024-11-22 10:59:33.365513440 +0000 +++ b2/build.log 2024-11-22 11:00:25.719136852 +0000 @@ -1,6 +1,6 @@ I: pbuilder: network access will be disabled during build -I: Current time: Thu Dec 25 05:22:07 -12 2025 -I: pbuilder-time-stamp: 1766683327 +I: Current time: Sat Nov 23 00:59:35 +14 2024 +I: pbuilder-time-stamp: 1732273175 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration @@ -26,54 +26,86 @@ dpkg-source: info: unpacking libscalar-properties-perl_1.100860-3.debian.tar.xz I: Not using root during the build. I: Installing the build-deps -I: user script /srv/workspace/pbuilder/48262/tmp/hooks/D02_print_environment starting +I: user script /srv/workspace/pbuilder/36482/tmp/hooks/D01_modify_environment starting +debug: Running on ionos12-i386. +I: Changing host+domainname to test build reproducibility +I: Adding a custom variable just for the fun of it... +I: Changing /bin/sh to bash +'/bin/sh' -> '/bin/bash' +lrwxrwxrwx 1 root root 9 Nov 22 10:59 /bin/sh -> /bin/bash +I: Setting pbuilder2's login shell to /bin/bash +I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other +I: user script /srv/workspace/pbuilder/36482/tmp/hooks/D01_modify_environment finished +I: user script /srv/workspace/pbuilder/36482/tmp/hooks/D02_print_environment starting I: set - BUILDDIR='/build/reproducible-path' - BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' - BUILDUSERNAME='pbuilder1' - BUILD_ARCH='i386' - DEBIAN_FRONTEND='noninteractive' - DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=22 ' - DISTRIBUTION='trixie' - HOME='/root' - HOST_ARCH='i386' + BASH=/bin/sh + BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath + BASH_ALIASES=() + BASH_ARGC=() + BASH_ARGV=() + BASH_CMDS=() + BASH_LINENO=([0]="12" [1]="0") + BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. + BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") + BASH_VERSINFO=([0]="5" [1]="2" [2]="32" [3]="1" [4]="release" [5]="i686-pc-linux-gnu") + BASH_VERSION='5.2.32(1)-release' + BUILDDIR=/build/reproducible-path + BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' + BUILDUSERNAME=pbuilder2 + BUILD_ARCH=i386 + DEBIAN_FRONTEND=noninteractive + DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=10 ' + DIRSTACK=() + DISTRIBUTION=trixie + EUID=0 + FUNCNAME=([0]="Echo" [1]="main") + GROUPS=() + HOME=/root + HOSTNAME=i-capture-the-hostname + HOSTTYPE=i686 + HOST_ARCH=i386 IFS=' ' - INVOCATION_ID='c803c97520774f9da51808039d9590e2' - LANG='C' - LANGUAGE='en_US:en' - LC_ALL='C' - LD_LIBRARY_PATH='/usr/lib/libeatmydata' - LD_PRELOAD='libeatmydata.so' - MAIL='/var/mail/root' - OPTIND='1' - PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' - PBCURRENTCOMMANDLINEOPERATION='build' - PBUILDER_OPERATION='build' - PBUILDER_PKGDATADIR='/usr/share/pbuilder' - PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' - PBUILDER_SYSCONFDIR='/etc' - PPID='48262' - PS1='# ' - PS2='> ' + INVOCATION_ID=d333e39e667c4584826c6c55e2d1b02b + LANG=C + LANGUAGE=de_CH:de + LC_ALL=C + LD_LIBRARY_PATH=/usr/lib/libeatmydata + LD_PRELOAD=libeatmydata.so + MACHTYPE=i686-pc-linux-gnu + MAIL=/var/mail/root + OPTERR=1 + OPTIND=1 + OSTYPE=linux-gnu + PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path + PBCURRENTCOMMANDLINEOPERATION=build + PBUILDER_OPERATION=build + PBUILDER_PKGDATADIR=/usr/share/pbuilder + PBUILDER_PKGLIBDIR=/usr/lib/pbuilder + PBUILDER_SYSCONFDIR=/etc + PIPESTATUS=([0]="0") + POSIXLY_CORRECT=y + PPID=36482 PS4='+ ' - PWD='/' - SHELL='/bin/bash' - SHLVL='2' - SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/pbuilderrc_PPRm --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/b1 --logfile b1/build.log libscalar-properties-perl_1.100860-3.dsc' - SUDO_GID='112' - SUDO_UID='107' - SUDO_USER='jenkins' - TERM='unknown' - TZ='/usr/share/zoneinfo/Etc/GMT+12' - USER='root' - _='/usr/bin/systemd-run' - http_proxy='http://213.165.73.152:3128' + PWD=/ + SHELL=/bin/bash + SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix + SHLVL=3 + SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/pbuilderrc_46Aj --distribution trixie --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/b2 --logfile b2/build.log libscalar-properties-perl_1.100860-3.dsc' + SUDO_GID=112 + SUDO_UID=107 + SUDO_USER=jenkins + TERM=unknown + TZ=/usr/share/zoneinfo/Etc/GMT-14 + UID=0 + USER=root + _='I: set' + http_proxy=http://46.16.76.132:3128 I: uname -a - Linux ionos16-i386 6.1.0-27-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.115-1 (2024-11-01) x86_64 GNU/Linux + Linux i-capture-the-hostname 6.1.0-27-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.115-1 (2024-11-01) x86_64 GNU/Linux I: ls -l /bin - lrwxrwxrwx 1 root root 7 Aug 4 2024 /bin -> usr/bin -I: user script /srv/workspace/pbuilder/48262/tmp/hooks/D02_print_environment finished + lrwxrwxrwx 1 root root 7 Aug 4 21:30 /bin -> usr/bin +I: user script /srv/workspace/pbuilder/36482/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy @@ -138,7 +170,7 @@ Get: 27 http://deb.debian.org/debian trixie/main i386 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian trixie/main i386 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian trixie/main i386 debhelper all 13.20 [915 kB] -Fetched 20.1 MB in 0s (92.6 MB/s) +Fetched 20.1 MB in 1s (33.2 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19956 files and directories currently installed.) @@ -269,7 +301,11 @@ Building tag database... -> Finished parsing the build-deps I: Building the package -I: Running cd /build/reproducible-path/libscalar-properties-perl-1.100860/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libscalar-properties-perl_1.100860-3_source.changes +I: user script /srv/workspace/pbuilder/36482/tmp/hooks/A99_set_merged_usr starting +Not re-configuring usrmerge for trixie +I: user script /srv/workspace/pbuilder/36482/tmp/hooks/A99_set_merged_usr finished +hostname: Name or service not known +I: Running cd /build/reproducible-path/libscalar-properties-perl-1.100860/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libscalar-properties-perl_1.100860-3_source.changes dpkg-buildpackage: info: source package libscalar-properties-perl dpkg-buildpackage: info: source version 1.100860-3 dpkg-buildpackage: info: source distribution unstable @@ -291,13 +327,13 @@ Writing Makefile for Scalar::Properties Writing MYMETA.yml and MYMETA.json dh_auto_build - make -j22 + make -j10 make[1]: Entering directory '/build/reproducible-path/libscalar-properties-perl-1.100860' cp lib/Scalar/Properties.pm blib/lib/Scalar/Properties.pm Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libscalar-properties-perl-1.100860' dh_auto_test - make -j22 test TEST_VERBOSE=1 + make -j10 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libscalar-properties-perl-1.100860' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ............... @@ -469,9 +505,9 @@ ok 141 ok 142 ok 143 -ok 144 class -ok 145 class -ok 146 class +ok 144 quadrant +ok 145 quadrant +ok 146 quadrant ok 147 ok 148 ok 149 class @@ -491,13 +527,13 @@ t/release-portability.t ...... skipped: these tests are for release candidate testing t/release-synopsis.t ......... skipped: these tests are for release candidate testing All tests successful. -Files=15, Tests=160, 1 wallclock secs ( 0.06 usr 0.00 sys + 0.86 cusr 0.12 csys = 1.04 CPU) +Files=15, Tests=160, 2 wallclock secs ( 0.08 usr 0.04 sys + 1.86 cusr 0.36 csys = 2.34 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libscalar-properties-perl-1.100860' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libscalar-properties-perl/ - make -j22 install DESTDIR=/build/reproducible-path/libscalar-properties-perl-1.100860/debian/libscalar-properties-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr + make -j10 install DESTDIR=/build/reproducible-path/libscalar-properties-perl-1.100860/debian/libscalar-properties-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libscalar-properties-perl-1.100860' Manifying 1 pod document Installing /build/reproducible-path/libscalar-properties-perl-1.100860/debian/libscalar-properties-perl/usr/share/perl5/Scalar/Properties.pm @@ -524,12 +560,14 @@ dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration +I: user script /srv/workspace/pbuilder/36482/tmp/hooks/B01_cleanup starting +I: user script /srv/workspace/pbuilder/36482/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env -I: removing directory /srv/workspace/pbuilder/48262 and its subdirectories -I: Current time: Thu Dec 25 05:22:32 -12 2025 -I: pbuilder-time-stamp: 1766683352 +I: removing directory /srv/workspace/pbuilder/36482 and its subdirectories +I: Current time: Sat Nov 23 01:00:25 +14 2024 +I: pbuilder-time-stamp: 1732273225 Compressing the 2nd log... /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/i386/libscalar-properties-perl_1.100860-3.diff: 67.6% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/trixie/i386/libscalar-properties-perl_1.100860-3.diff.gz b2/build.log: 72.7% -- replaced with stdout Compressing the 1st log... b1/build.log: 73.1% -- replaced with stdout Fri Nov 22 11:00:27 UTC 2024 I: diffoscope 283 will be used to compare the two builds: ++ date -u +%s + DIFFOSCOPE_STAMP=/var/log/reproducible-builds/diffoscope_stamp_libscalar-properties-perl_trixie_i386_1732273227 + touch /var/log/reproducible-builds/diffoscope_stamp_libscalar-properties-perl_trixie_i386_1732273227 + RESULT=0 + systemd-run '--description=diffoscope on libscalar-properties-perl/1.100860-3 in trixie/i386' --slice=rb-build-diffoscope.slice -u rb-diffoscope-i386_8-48844 '--property=SuccessExitStatus=1 124' --user --send-sighup --pipe --wait -E TMPDIR timeout 155m nice schroot --directory /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj --run-session -c jenkins-reproducible-trixie-diffoscope-2165e238-0672-4a15-a38b-3b1428018407 -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/dbd-tmp-x4X58qs ; timeout 150m diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/libscalar-properties-perl_1.100860-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/libscalar-properties-perl_1.100860-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/libscalar-properties-perl_1.100860-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/b1/libscalar-properties-perl_1.100860-3_i386.changes /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/b2/libscalar-properties-perl_1.100860-3_i386.changes' + false + set +x Running as unit: rb-diffoscope-i386_8-48844.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/libscalar-properties-perl_1.100860-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/libscalar-properties-perl_1.100860-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/libscalar-properties-perl_1.100860-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/b1/libscalar-properties-perl_1.100860-3_i386.changes /srv/reproducible-results/rbuild-debian/r-b-build.EPfmHmUj/b2/libscalar-properties-perl_1.100860-3_i386.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.339s) 0.339s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.015s) 0.015s 12 calls diffoscope.comparators.binary.FilesystemFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 645ms CPU time consumed: 643ms _ _ _ _ _ | (_) |__ ___ ___ __ _| | __ _ _ __ _ __ _ __ ___ _ __ ___ _ __| |_ | | | '_ \/ __|/ __/ _` | |/ _` | '__|____| '_ \| '__/ _ \| '_ \ / _ \ '__| __| | | | |_) \__ \ (_| (_| | | (_| | | |_____| |_) | | | (_) | |_) | __/ | | |_ |_|_|_.__/|___/\___\__,_|_|\__,_|_| | .__/|_| \___/| .__/ \___|_| \__| |_| |_| _ _ (_) ___ ___ _ __ ___ _ __| | | |/ _ \/ __|_____| '_ \ / _ \ '__| | | | __/\__ \_____| |_) | __/ | | | |_|\___||___/ | .__/ \___|_| |_| |_| Fri Nov 22 11:00:28 UTC 2024 I: diffoscope 283 found no differences in the changes files, and a .buildinfo file also exists. Fri Nov 22 11:00:28 UTC 2024 I: libscalar-properties-perl from trixie built successfully and reproducibly on i386. INSERT 0 1 INSERT 0 1 DELETE 1 [2024-11-22 11:00:29] INFO: Starting at 2024-11-22 11:00:29.190336 [2024-11-22 11:00:29] INFO: Generating the pages of 1 package(s) [2024-11-22 11:00:29] CRITICAL: https://tests.reproducible-builds.org/debian/trixie/i386/libscalar-properties-perl didn't produce a buildlog, even though it has been built. [2024-11-22 11:00:29] INFO: Finished at 2024-11-22 11:00:29.620033, took: 0:00:00.429703 Fri Nov 22 11:00:29 UTC 2024 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/trixie/i386/libscalar-properties-perl.html Fri Nov 22 11:00:29 UTC 2024 I: Submitting .buildinfo files to external archives: Fri Nov 22 11:00:29 UTC 2024 I: Submitting 8.0K b1/libscalar-properties-perl_1.100860-3_i386.buildinfo.asc https://buildinfo.debian.net/b485dd53f8d80a3f38ab745fa9a8cf23c50c7e1b/libscalar-properties-perl_1.100860-3_all Fri Nov 22 11:00:30 UTC 2024 I: Submitting 8.0K b2/libscalar-properties-perl_1.100860-3_i386.buildinfo.asc https://buildinfo.debian.net/e85cad39b27b2bc180b2f2a33a52d048f641095f/libscalar-properties-perl_1.100860-3_all Fri Nov 22 11:00:31 UTC 2024 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri Nov 22 11:00:31 UTC 2024 I: Done submitting .buildinfo files. Fri Nov 22 11:00:31 UTC 2024 I: Removing signed libscalar-properties-perl_1.100860-3_i386.buildinfo.asc files: removed './b1/libscalar-properties-perl_1.100860-3_i386.buildinfo.asc' removed './b2/libscalar-properties-perl_1.100860-3_i386.buildinfo.asc' 1732273231 i386 trixie libscalar-properties-perl Starting cleanup. /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/i386/libscalar-properties-perl_1.100860-3.rbuild.log: 70.7% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/trixie/i386/libscalar-properties-perl_1.100860-3.rbuild.log.gz [2024-11-22 11:00:31] INFO: Starting at 2024-11-22 11:00:31.512462 [2024-11-22 11:00:31] INFO: Generating the pages of 1 package(s) [2024-11-22 11:00:31] INFO: Finished at 2024-11-22 11:00:31.942816, took: 0:00:00.430360 All cleanup done. Fri Nov 22 11:00:32 UTC 2024 - total duration: 0h 1m 37s. Fri Nov 22 11:00:32 UTC 2024 - reproducible_build.sh stopped running as /tmp/jenkins-script-krH90cyM, removing. Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 1min 40.926s CPU time consumed: 6.910s