I: pbuilder: network access will be disabled during build I: Current time: Sat May 11 08:48:36 +14 2024 I: pbuilder-time-stamp: 1715366916 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bookworm-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [ros-rosinstall_0.7.8-6.dsc] I: copying [./ros-rosinstall_0.7.8.orig.tar.gz] I: copying [./ros-rosinstall_0.7.8-6.debian.tar.xz] I: Extracting source gpgv: Signature made Thu Oct 20 10:36:46 2022 +14 gpgv: using RSA key 73B299CBD4EEADDCC017E87A5BFFDCC258E69433 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./ros-rosinstall_0.7.8-6.dsc: no acceptable signature found dpkg-source: info: extracting ros-rosinstall in ros-rosinstall-0.7.8 dpkg-source: info: unpacking ros-rosinstall_0.7.8.orig.tar.gz dpkg-source: info: unpacking ros-rosinstall_0.7.8-6.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 0001-Add-default-ROS_ROOT-for-rosbuild.patch dpkg-source: info: applying 0002-Disable-tests-with-network-connection.patch dpkg-source: info: applying 0004-Add-missing-dependency.patch dpkg-source: info: applying 0004-Add-fake-identity-for-VCSs-107.patch dpkg-source: info: applying 0005-Adopt-to-new-get_info_table_raw_csv-API.patch dpkg-source: info: applying 0006-Switch-generated-setup.sh-to-Python-3.patch dpkg-source: info: applying 0007-Disable-test-using-Python-2.patch dpkg-source: info: applying 0008-Fix-Python-3-detection.patch dpkg-source: info: applying 0009-Use-yaml.safe_load.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/31094/tmp/hooks/D01_modify_environment starting debug: Running on codethink15-arm64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash lrwxrwxrwx 1 root root 4 Jan 6 2023 /bin/sh -> dash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/31094/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/31094/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME='pbuilder2' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=8' DISTRIBUTION='bookworm' HOME='/var/lib/jenkins' HOST_ARCH='arm64' IFS=' ' LANG='C' LANGUAGE='nl_BE:nl' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='31094' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.jQsSQuAZ/pbuilderrc_WAro --distribution bookworm --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bookworm-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.jQsSQuAZ/b2 --logfile b2/build.log --extrapackages usrmerge ros-rosinstall_0.7.8-6.dsc' SUDO_GID='117' SUDO_UID='110' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT-14' USER='root' USERNAME='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.16:3128' I: uname -a Linux i-capture-the-hostname 4.15.0-208-generic #220-Ubuntu SMP Mon Mar 20 14:28:12 UTC 2023 aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 May 10 06:47 /bin -> usr/bin I: user script /srv/workspace/pbuilder/31094/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), dh-sequence-python3, python3-all, python3-setuptools, git, mercurial, zsh, python3-wstool, python3-yaml, python3-mock, python3-catkin-pkg, python3-rosdistro dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19616 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on dh-sequence-python3; however: Package dh-sequence-python3 is not installed. pbuilder-satisfydepends-dummy depends on python3-all; however: Package python3-all is not installed. pbuilder-satisfydepends-dummy depends on python3-setuptools; however: Package python3-setuptools is not installed. pbuilder-satisfydepends-dummy depends on git; however: Package git is not installed. pbuilder-satisfydepends-dummy depends on mercurial; however: Package mercurial is not installed. pbuilder-satisfydepends-dummy depends on zsh; however: Package zsh is not installed. pbuilder-satisfydepends-dummy depends on python3-wstool; however: Package python3-wstool is not installed. pbuilder-satisfydepends-dummy depends on python3-yaml; however: Package python3-yaml is not installed. pbuilder-satisfydepends-dummy depends on python3-mock; however: Package python3-mock is not installed. pbuilder-satisfydepends-dummy depends on python3-catkin-pkg; however: Package python3-catkin-pkg is not installed. pbuilder-satisfydepends-dummy depends on python3-rosdistro; however: Package python3-rosdistro is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-python{a} dh-strip-nondeterminism{a} docutils-common{a} dwz{a} file{a} gettext{a} gettext-base{a} git{a} git-man{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbrotli1{a} libcurl3-gnutls{a} libdebhelper-perl{a} libelf1{a} liberror-perl{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libicu72{a} libldap-2.5-0{a} libmagic-mgc{a} libmagic1{a} libnghttp2-14{a} libpipeline1{a} libpsl5{a} libpython3-stdlib{a} libpython3.11-minimal{a} libpython3.11-stdlib{a} libreadline8{a} librtmp1{a} libsasl2-2{a} libsasl2-modules-db{a} libssh2-1{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} libyaml-0-2{a} lsb-release{a} m4{a} man-db{a} media-types{a} mercurial{a} mercurial-common{a} po-debconf{a} python3{a} python3-all{a} python3-catkin-pkg{a} python3-dateutil{a} python3-distro{a} python3-distutils{a} python3-docutils{a} python3-lib2to3{a} python3-minimal{a} python3-mock{a} python3-pbr{a} python3-pkg-resources{a} python3-pyparsing{a} python3-roman{a} python3-rosdistro{a} python3-rospkg{a} python3-setuptools{a} python3-six{a} python3-vcstools{a} python3-wstool{a} python3-yaml{a} python3.11{a} python3.11-minimal{a} readline-common{a} sensible-utils{a} sgml-base{a} ucf{a} xml-core{a} zsh{a} zsh-common{a} The following packages are RECOMMENDED but will NOT be installed: brz bzr ca-certificates curl less libarchive-cpio-perl libldap-common libltdl-dev libmail-sendmail-perl libpaper-utils libpcre3 libsasl2-modules lynx openssh-client publicsuffix python3-pil python3-pygments subversion wget 0 packages upgraded, 83 newly installed, 0 to remove and 0 not upgraded. Need to get 44.6 MB of archives. After unpacking 199 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bookworm/main arm64 libpython3.11-minimal arm64 3.11.2-6 [806 kB] Get: 2 http://deb.debian.org/debian bookworm/main arm64 libexpat1 arm64 2.5.0-1 [84.8 kB] Get: 3 http://deb.debian.org/debian bookworm/main arm64 python3.11-minimal arm64 3.11.2-6 [1858 kB] Get: 4 http://deb.debian.org/debian bookworm/main arm64 python3-minimal arm64 3.11.2-1 [26.0 kB] Get: 5 http://deb.debian.org/debian bookworm/main arm64 media-types all 10.0.0 [26.1 kB] Get: 6 http://deb.debian.org/debian bookworm/main arm64 readline-common all 8.2-1.3 [69.0 kB] Get: 7 http://deb.debian.org/debian bookworm/main arm64 libreadline8 arm64 8.2-1.3 [155 kB] Get: 8 http://deb.debian.org/debian bookworm/main arm64 libpython3.11-stdlib arm64 3.11.2-6 [1747 kB] Get: 9 http://deb.debian.org/debian bookworm/main arm64 python3.11 arm64 3.11.2-6 [572 kB] Get: 10 http://deb.debian.org/debian bookworm/main arm64 libpython3-stdlib arm64 3.11.2-1 [9012 B] Get: 11 http://deb.debian.org/debian bookworm/main arm64 python3 arm64 3.11.2-1 [26.0 kB] Get: 12 http://deb.debian.org/debian bookworm/main arm64 sgml-base all 1.31 [15.4 kB] Get: 13 http://deb.debian.org/debian bookworm/main arm64 sensible-utils all 0.0.17+nmu1 [19.0 kB] Get: 14 http://deb.debian.org/debian bookworm/main arm64 libmagic-mgc arm64 1:5.44-3 [305 kB] Get: 15 http://deb.debian.org/debian bookworm/main arm64 libmagic1 arm64 1:5.44-3 [98.5 kB] Get: 16 http://deb.debian.org/debian bookworm/main arm64 file arm64 1:5.44-3 [42.5 kB] Get: 17 http://deb.debian.org/debian bookworm/main arm64 gettext-base arm64 0.21-12 [159 kB] Get: 18 http://deb.debian.org/debian bookworm/main arm64 libuchardet0 arm64 0.0.7-1 [67.9 kB] Get: 19 http://deb.debian.org/debian bookworm/main arm64 groff-base arm64 1.22.4-10 [861 kB] Get: 20 http://deb.debian.org/debian bookworm/main arm64 bsdextrautils arm64 2.38.1-5+b1 [86.9 kB] Get: 21 http://deb.debian.org/debian bookworm/main arm64 libpipeline1 arm64 1.5.7-1 [36.4 kB] Get: 22 http://deb.debian.org/debian bookworm/main arm64 man-db arm64 2.11.2-2 [1369 kB] Get: 23 http://deb.debian.org/debian bookworm/main arm64 ucf all 3.0043+nmu1 [55.2 kB] Get: 24 http://deb.debian.org/debian bookworm/main arm64 m4 arm64 1.4.19-3 [276 kB] Get: 25 http://deb.debian.org/debian bookworm/main arm64 autoconf all 2.71-3 [332 kB] Get: 26 http://deb.debian.org/debian bookworm/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 27 http://deb.debian.org/debian bookworm/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 28 http://deb.debian.org/debian bookworm/main arm64 autopoint all 0.21-12 [495 kB] Get: 29 http://deb.debian.org/debian bookworm/main arm64 libdebhelper-perl all 13.11.4 [81.2 kB] Get: 30 http://deb.debian.org/debian bookworm/main arm64 libtool all 2.4.7-5 [517 kB] Get: 31 http://deb.debian.org/debian bookworm/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 32 http://deb.debian.org/debian bookworm/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 33 http://deb.debian.org/debian bookworm/main arm64 libsub-override-perl all 0.09-4 [9304 B] Get: 34 http://deb.debian.org/debian bookworm/main arm64 libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 35 http://deb.debian.org/debian bookworm/main arm64 dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 36 http://deb.debian.org/debian bookworm/main arm64 libelf1 arm64 0.188-2.1 [173 kB] Get: 37 http://deb.debian.org/debian bookworm/main arm64 dwz arm64 0.15-1 [101 kB] Get: 38 http://deb.debian.org/debian bookworm/main arm64 libicu72 arm64 72.1-3 [9204 kB] Get: 39 http://deb.debian.org/debian bookworm/main arm64 libxml2 arm64 2.9.14+dfsg-1.1+b3 [619 kB] Get: 40 http://deb.debian.org/debian bookworm/main arm64 gettext arm64 0.21-12 [1248 kB] Get: 41 http://deb.debian.org/debian bookworm/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 42 http://deb.debian.org/debian bookworm/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 43 http://deb.debian.org/debian bookworm/main arm64 debhelper all 13.11.4 [942 kB] Get: 44 http://deb.debian.org/debian bookworm/main arm64 python3-lib2to3 all 3.11.2-2 [76.2 kB] Get: 45 http://deb.debian.org/debian bookworm/main arm64 python3-distutils all 3.11.2-2 [131 kB] Get: 46 http://deb.debian.org/debian bookworm/main arm64 dh-python all 5.20230130 [104 kB] Get: 47 http://deb.debian.org/debian bookworm/main arm64 xml-core all 0.18+nmu1 [23.8 kB] Get: 48 http://deb.debian.org/debian bookworm/main arm64 docutils-common all 0.19+dfsg-6 [127 kB] Get: 49 http://deb.debian.org/debian bookworm/main arm64 libbrotli1 arm64 1.0.9-2+b6 [269 kB] Get: 50 http://deb.debian.org/debian bookworm/main arm64 libsasl2-modules-db arm64 2.1.28+dfsg-10 [20.8 kB] Get: 51 http://deb.debian.org/debian bookworm/main arm64 libsasl2-2 arm64 2.1.28+dfsg-10 [58.0 kB] Get: 52 http://deb.debian.org/debian bookworm/main arm64 libldap-2.5-0 arm64 2.5.13+dfsg-5 [171 kB] Get: 53 http://deb.debian.org/debian bookworm/main arm64 libnghttp2-14 arm64 1.52.0-1 [67.9 kB] Get: 54 http://deb.debian.org/debian bookworm/main arm64 libpsl5 arm64 0.21.2-1 [58.6 kB] Get: 55 http://deb.debian.org/debian bookworm/main arm64 librtmp1 arm64 2.4+20151223.gitfa8646d.1-2+b2 [59.4 kB] Get: 56 http://deb.debian.org/debian bookworm/main arm64 libssh2-1 arm64 1.10.0-3+b1 [172 kB] Get: 57 http://deb.debian.org/debian bookworm/main arm64 libcurl3-gnutls arm64 7.88.1-7 [356 kB] Get: 58 http://deb.debian.org/debian bookworm/main arm64 liberror-perl all 0.17029-2 [29.0 kB] Get: 59 http://deb.debian.org/debian bookworm/main arm64 git-man all 1:2.39.2-1.1 [2049 kB] Get: 60 http://deb.debian.org/debian bookworm/main arm64 git arm64 1:2.39.2-1.1 [7023 kB] Get: 61 http://deb.debian.org/debian bookworm/main arm64 libyaml-0-2 arm64 0.2.5-1 [50.4 kB] Get: 62 http://deb.debian.org/debian bookworm/main arm64 lsb-release all 12.0-1 [6416 B] Get: 63 http://deb.debian.org/debian bookworm/main arm64 mercurial-common all 6.3.2-1 [2768 kB] Get: 64 http://deb.debian.org/debian bookworm/main arm64 mercurial arm64 6.3.2-1 [312 kB] Get: 65 http://deb.debian.org/debian bookworm/main arm64 python3-all arm64 3.11.2-1 [1060 B] Get: 66 http://deb.debian.org/debian bookworm/main arm64 python3-six all 1.16.0-4 [17.5 kB] Get: 67 http://deb.debian.org/debian bookworm/main arm64 python3-dateutil all 2.8.2-2 [78.3 kB] Get: 68 http://deb.debian.org/debian bookworm/main arm64 python3-roman all 3.3-3 [9880 B] Get: 69 http://deb.debian.org/debian bookworm/main arm64 python3-docutils all 0.19+dfsg-6 [382 kB] Get: 70 http://deb.debian.org/debian bookworm/main arm64 python3-pkg-resources all 66.1.1-1 [296 kB] Get: 71 http://deb.debian.org/debian bookworm/main arm64 python3-pyparsing all 3.0.9-1 [138 kB] Get: 72 http://deb.debian.org/debian bookworm/main arm64 python3-catkin-pkg all 0.5.2-5 [48.4 kB] Get: 73 http://deb.debian.org/debian bookworm/main arm64 python3-distro all 1.8.0-1 [20.5 kB] Get: 74 http://deb.debian.org/debian bookworm/main arm64 python3-setuptools all 66.1.1-1 [521 kB] Get: 75 http://deb.debian.org/debian bookworm/main arm64 python3-pbr all 5.10.0-2 [61.4 kB] Get: 76 http://deb.debian.org/debian bookworm/main arm64 python3-mock all 4.0.3-4 [64.0 kB] Get: 77 http://deb.debian.org/debian bookworm/main arm64 python3-yaml arm64 6.0-3+b2 [108 kB] Get: 78 http://deb.debian.org/debian bookworm/main arm64 python3-rospkg all 1.4.0-2 [26.7 kB] Get: 79 http://deb.debian.org/debian bookworm/main arm64 python3-rosdistro all 0.9.0-3 [36.0 kB] Get: 80 http://deb.debian.org/debian bookworm/main arm64 python3-vcstools all 0.1.42-7 [33.5 kB] Get: 81 http://deb.debian.org/debian bookworm/main arm64 python3-wstool all 0.1.18-3 [40.2 kB] Get: 82 http://deb.debian.org/debian bookworm/main arm64 zsh-common all 5.9-4 [4147 kB] Get: 83 http://deb.debian.org/debian bookworm/main arm64 zsh arm64 5.9-4 [835 kB] Fetched 44.6 MB in 1s (41.9 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libpython3.11-minimal:arm64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19616 files and directories currently installed.) Preparing to unpack .../libpython3.11-minimal_3.11.2-6_arm64.deb ... Unpacking libpython3.11-minimal:arm64 (3.11.2-6) ... Selecting previously unselected package libexpat1:arm64. Preparing to unpack .../libexpat1_2.5.0-1_arm64.deb ... Unpacking libexpat1:arm64 (2.5.0-1) ... Selecting previously unselected package python3.11-minimal. Preparing to unpack .../python3.11-minimal_3.11.2-6_arm64.deb ... Unpacking python3.11-minimal (3.11.2-6) ... Setting up libpython3.11-minimal:arm64 (3.11.2-6) ... Setting up libexpat1:arm64 (2.5.0-1) ... Setting up python3.11-minimal (3.11.2-6) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19932 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.11.2-1_arm64.deb ... Unpacking python3-minimal (3.11.2-1) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_10.0.0_all.deb ... Unpacking media-types (10.0.0) ... Selecting previously unselected package readline-common. Preparing to unpack .../2-readline-common_8.2-1.3_all.deb ... Unpacking readline-common (8.2-1.3) ... Selecting previously unselected package libreadline8:arm64. Preparing to unpack .../3-libreadline8_8.2-1.3_arm64.deb ... Unpacking libreadline8:arm64 (8.2-1.3) ... Selecting previously unselected package libpython3.11-stdlib:arm64. Preparing to unpack .../4-libpython3.11-stdlib_3.11.2-6_arm64.deb ... Unpacking libpython3.11-stdlib:arm64 (3.11.2-6) ... Selecting previously unselected package python3.11. Preparing to unpack .../5-python3.11_3.11.2-6_arm64.deb ... Unpacking python3.11 (3.11.2-6) ... Selecting previously unselected package libpython3-stdlib:arm64. Preparing to unpack .../6-libpython3-stdlib_3.11.2-1_arm64.deb ... Unpacking libpython3-stdlib:arm64 (3.11.2-1) ... Setting up python3-minimal (3.11.2-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20364 files and directories currently installed.) Preparing to unpack .../00-python3_3.11.2-1_arm64.deb ... Unpacking python3 (3.11.2-1) ... Selecting previously unselected package sgml-base. Preparing to unpack .../01-sgml-base_1.31_all.deb ... Unpacking sgml-base (1.31) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../02-sensible-utils_0.0.17+nmu1_all.deb ... Unpacking sensible-utils (0.0.17+nmu1) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../03-libmagic-mgc_1%3a5.44-3_arm64.deb ... Unpacking libmagic-mgc (1:5.44-3) ... Selecting previously unselected package libmagic1:arm64. Preparing to unpack .../04-libmagic1_1%3a5.44-3_arm64.deb ... Unpacking libmagic1:arm64 (1:5.44-3) ... Selecting previously unselected package file. Preparing to unpack .../05-file_1%3a5.44-3_arm64.deb ... Unpacking file (1:5.44-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../06-gettext-base_0.21-12_arm64.deb ... Unpacking gettext-base (0.21-12) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../07-libuchardet0_0.0.7-1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../08-groff-base_1.22.4-10_arm64.deb ... Unpacking groff-base (1.22.4-10) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../09-bsdextrautils_2.38.1-5+b1_arm64.deb ... Unpacking bsdextrautils (2.38.1-5+b1) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../10-libpipeline1_1.5.7-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.7-1) ... Selecting previously unselected package man-db. Preparing to unpack .../11-man-db_2.11.2-2_arm64.deb ... Unpacking man-db (2.11.2-2) ... Selecting previously unselected package ucf. Preparing to unpack .../12-ucf_3.0043+nmu1_all.deb ... Moving old data out of the way Unpacking ucf (3.0043+nmu1) ... Selecting previously unselected package m4. Preparing to unpack .../13-m4_1.4.19-3_arm64.deb ... Unpacking m4 (1.4.19-3) ... Selecting previously unselected package autoconf. Preparing to unpack .../14-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../15-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../16-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../17-autopoint_0.21-12_all.deb ... Unpacking autopoint (0.21-12) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../18-libdebhelper-perl_13.11.4_all.deb ... Unpacking libdebhelper-perl (13.11.4) ... Selecting previously unselected package libtool. Preparing to unpack .../19-libtool_2.4.7-5_all.deb ... Unpacking libtool (2.4.7-5) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../20-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../21-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../22-libsub-override-perl_0.09-4_all.deb ... Unpacking libsub-override-perl (0.09-4) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../23-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../24-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1:arm64. Preparing to unpack .../25-libelf1_0.188-2.1_arm64.deb ... Unpacking libelf1:arm64 (0.188-2.1) ... Selecting previously unselected package dwz. Preparing to unpack .../26-dwz_0.15-1_arm64.deb ... Unpacking dwz (0.15-1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../27-libicu72_72.1-3_arm64.deb ... Unpacking libicu72:arm64 (72.1-3) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../28-libxml2_2.9.14+dfsg-1.1+b3_arm64.deb ... Unpacking libxml2:arm64 (2.9.14+dfsg-1.1+b3) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.21-12_arm64.deb ... Unpacking gettext (0.21-12) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_13.11.4_all.deb ... Unpacking debhelper (13.11.4) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../33-python3-lib2to3_3.11.2-2_all.deb ... Unpacking python3-lib2to3 (3.11.2-2) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../34-python3-distutils_3.11.2-2_all.deb ... Unpacking python3-distutils (3.11.2-2) ... Selecting previously unselected package dh-python. Preparing to unpack .../35-dh-python_5.20230130_all.deb ... Unpacking dh-python (5.20230130) ... Selecting previously unselected package xml-core. Preparing to unpack .../36-xml-core_0.18+nmu1_all.deb ... Unpacking xml-core (0.18+nmu1) ... Selecting previously unselected package docutils-common. Preparing to unpack .../37-docutils-common_0.19+dfsg-6_all.deb ... Unpacking docutils-common (0.19+dfsg-6) ... Selecting previously unselected package libbrotli1:arm64. Preparing to unpack .../38-libbrotli1_1.0.9-2+b6_arm64.deb ... Unpacking libbrotli1:arm64 (1.0.9-2+b6) ... Selecting previously unselected package libsasl2-modules-db:arm64. Preparing to unpack .../39-libsasl2-modules-db_2.1.28+dfsg-10_arm64.deb ... Unpacking libsasl2-modules-db:arm64 (2.1.28+dfsg-10) ... Selecting previously unselected package libsasl2-2:arm64. Preparing to unpack .../40-libsasl2-2_2.1.28+dfsg-10_arm64.deb ... Unpacking libsasl2-2:arm64 (2.1.28+dfsg-10) ... Selecting previously unselected package libldap-2.5-0:arm64. Preparing to unpack .../41-libldap-2.5-0_2.5.13+dfsg-5_arm64.deb ... Unpacking libldap-2.5-0:arm64 (2.5.13+dfsg-5) ... Selecting previously unselected package libnghttp2-14:arm64. Preparing to unpack .../42-libnghttp2-14_1.52.0-1_arm64.deb ... Unpacking libnghttp2-14:arm64 (1.52.0-1) ... Selecting previously unselected package libpsl5:arm64. Preparing to unpack .../43-libpsl5_0.21.2-1_arm64.deb ... Unpacking libpsl5:arm64 (0.21.2-1) ... Selecting previously unselected package librtmp1:arm64. Preparing to unpack .../44-librtmp1_2.4+20151223.gitfa8646d.1-2+b2_arm64.deb ... Unpacking librtmp1:arm64 (2.4+20151223.gitfa8646d.1-2+b2) ... Selecting previously unselected package libssh2-1:arm64. Preparing to unpack .../45-libssh2-1_1.10.0-3+b1_arm64.deb ... Unpacking libssh2-1:arm64 (1.10.0-3+b1) ... Selecting previously unselected package libcurl3-gnutls:arm64. Preparing to unpack .../46-libcurl3-gnutls_7.88.1-7_arm64.deb ... Unpacking libcurl3-gnutls:arm64 (7.88.1-7) ... Selecting previously unselected package liberror-perl. Preparing to unpack .../47-liberror-perl_0.17029-2_all.deb ... Unpacking liberror-perl (0.17029-2) ... Selecting previously unselected package git-man. Preparing to unpack .../48-git-man_1%3a2.39.2-1.1_all.deb ... Unpacking git-man (1:2.39.2-1.1) ... Selecting previously unselected package git. Preparing to unpack .../49-git_1%3a2.39.2-1.1_arm64.deb ... Unpacking git (1:2.39.2-1.1) ... Selecting previously unselected package libyaml-0-2:arm64. Preparing to unpack .../50-libyaml-0-2_0.2.5-1_arm64.deb ... Unpacking libyaml-0-2:arm64 (0.2.5-1) ... Selecting previously unselected package lsb-release. Preparing to unpack .../51-lsb-release_12.0-1_all.deb ... Unpacking lsb-release (12.0-1) ... Selecting previously unselected package mercurial-common. Preparing to unpack .../52-mercurial-common_6.3.2-1_all.deb ... Unpacking mercurial-common (6.3.2-1) ... Selecting previously unselected package mercurial. Preparing to unpack .../53-mercurial_6.3.2-1_arm64.deb ... Unpacking mercurial (6.3.2-1) ... Selecting previously unselected package python3-all. Preparing to unpack .../54-python3-all_3.11.2-1_arm64.deb ... Unpacking python3-all (3.11.2-1) ... Selecting previously unselected package python3-six. Preparing to unpack .../55-python3-six_1.16.0-4_all.deb ... Unpacking python3-six (1.16.0-4) ... Selecting previously unselected package python3-dateutil. Preparing to unpack .../56-python3-dateutil_2.8.2-2_all.deb ... Unpacking python3-dateutil (2.8.2-2) ... Selecting previously unselected package python3-roman. Preparing to unpack .../57-python3-roman_3.3-3_all.deb ... Unpacking python3-roman (3.3-3) ... Selecting previously unselected package python3-docutils. Preparing to unpack .../58-python3-docutils_0.19+dfsg-6_all.deb ... Unpacking python3-docutils (0.19+dfsg-6) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../59-python3-pkg-resources_66.1.1-1_all.deb ... Unpacking python3-pkg-resources (66.1.1-1) ... Selecting previously unselected package python3-pyparsing. Preparing to unpack .../60-python3-pyparsing_3.0.9-1_all.deb ... Unpacking python3-pyparsing (3.0.9-1) ... Selecting previously unselected package python3-catkin-pkg. Preparing to unpack .../61-python3-catkin-pkg_0.5.2-5_all.deb ... Unpacking python3-catkin-pkg (0.5.2-5) ... Selecting previously unselected package python3-distro. Preparing to unpack .../62-python3-distro_1.8.0-1_all.deb ... Unpacking python3-distro (1.8.0-1) ... Selecting previously unselected package python3-setuptools. Preparing to unpack .../63-python3-setuptools_66.1.1-1_all.deb ... Unpacking python3-setuptools (66.1.1-1) ... Selecting previously unselected package python3-pbr. Preparing to unpack .../64-python3-pbr_5.10.0-2_all.deb ... Unpacking python3-pbr (5.10.0-2) ... Selecting previously unselected package python3-mock. Preparing to unpack .../65-python3-mock_4.0.3-4_all.deb ... Unpacking python3-mock (4.0.3-4) ... Selecting previously unselected package python3-yaml. Preparing to unpack .../66-python3-yaml_6.0-3+b2_arm64.deb ... Unpacking python3-yaml (6.0-3+b2) ... Selecting previously unselected package python3-rospkg. Preparing to unpack .../67-python3-rospkg_1.4.0-2_all.deb ... Unpacking python3-rospkg (1.4.0-2) ... Selecting previously unselected package python3-rosdistro. Preparing to unpack .../68-python3-rosdistro_0.9.0-3_all.deb ... Unpacking python3-rosdistro (0.9.0-3) ... Selecting previously unselected package python3-vcstools. Preparing to unpack .../69-python3-vcstools_0.1.42-7_all.deb ... Unpacking python3-vcstools (0.1.42-7) ... Selecting previously unselected package python3-wstool. Preparing to unpack .../70-python3-wstool_0.1.18-3_all.deb ... Unpacking python3-wstool (0.1.18-3) ... Selecting previously unselected package zsh-common. Preparing to unpack .../71-zsh-common_5.9-4_all.deb ... Unpacking zsh-common (5.9-4) ... Selecting previously unselected package zsh. Preparing to unpack .../72-zsh_5.9-4_arm64.deb ... Unpacking zsh (5.9-4) ... Setting up media-types (10.0.0) ... Setting up libpipeline1:arm64 (1.5.7-1) ... Setting up libpsl5:arm64 (0.21.2-1) ... Setting up libicu72:arm64 (72.1-3) ... Setting up bsdextrautils (2.38.1-5+b1) ... Setting up libmagic-mgc (1:5.44-3) ... Setting up zsh-common (5.9-4) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libyaml-0-2:arm64 (0.2.5-1) ... Setting up libdebhelper-perl (13.11.4) ... Setting up libbrotli1:arm64 (1.0.9-2+b6) ... Setting up libnghttp2-14:arm64 (1.52.0-1) ... Setting up libmagic1:arm64 (1:5.44-3) ... Setting up gettext-base (0.21-12) ... Setting up m4 (1.4.19-3) ... Setting up file (1:5.44-3) ... Setting up libsasl2-modules-db:arm64 (2.1.28+dfsg-10) ... Setting up liberror-perl (0.17029-2) ... Setting up autotools-dev (20220109.1) ... Setting up librtmp1:arm64 (2.4+20151223.gitfa8646d.1-2+b2) ... Setting up autopoint (0.21-12) ... Setting up libsasl2-2:arm64 (2.1.28+dfsg-10) ... Setting up autoconf (2.71-3) ... Setting up sensible-utils (0.0.17+nmu1) ... Setting up libuchardet0:arm64 (0.0.7-1) ... Setting up libsub-override-perl (0.09-4) ... Setting up git-man (1:2.39.2-1.1) ... Setting up libssh2-1:arm64 (1.10.0-3+b1) ... Setting up sgml-base (1.31) ... Setting up zsh (5.9-4) ... Setting up lsb-release (12.0-1) ... Setting up libelf1:arm64 (0.188-2.1) ... Setting up readline-common (8.2-1.3) ... Setting up libxml2:arm64 (2.9.14+dfsg-1.1+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up gettext (0.21-12) ... Setting up libtool (2.4.7-5) ... Setting up libreadline8:arm64 (8.2-1.3) ... Setting up libldap-2.5-0:arm64 (2.5.13+dfsg-5) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up ucf (3.0043+nmu1) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up dwz (0.15-1) ... Setting up groff-base (1.22.4-10) ... Setting up xml-core (0.18+nmu1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libpython3.11-stdlib:arm64 (3.11.2-6) ... Setting up libcurl3-gnutls:arm64 (7.88.1-7) ... Setting up man-db (2.11.2-2) ... Not building database; man-db/auto-update is not 'true'. Setting up git (1:2.39.2-1.1) ... Setting up libpython3-stdlib:arm64 (3.11.2-1) ... Setting up python3.11 (3.11.2-6) ... Setting up debhelper (13.11.4) ... Setting up python3 (3.11.2-1) ... Setting up python3-six (1.16.0-4) ... Setting up python3-roman (3.3-3) ... Setting up python3-pyparsing (3.0.9-1) ... Setting up python3-dateutil (2.8.2-2) ... Setting up python3-lib2to3 (3.11.2-2) ... Setting up python3-pkg-resources (66.1.1-1) ... Setting up python3-distutils (3.11.2-2) ... Setting up dh-python (5.20230130) ... Setting up python3-setuptools (66.1.1-1) ... Setting up python3-distro (1.8.0-1) ... Setting up mercurial-common (6.3.2-1) ... Setting up python3-pbr (5.10.0-2) ... Setting up python3-all (3.11.2-1) ... Setting up python3-yaml (6.0-3+b2) ... Setting up python3-mock (4.0.3-4) ... Setting up python3-vcstools (0.1.42-7) ... Setting up mercurial (6.3.2-1) ... Creating config file /etc/mercurial/hgrc.d/hgext.rc with new version Setting up python3-wstool (0.1.18-3) ... Processing triggers for debianutils (5.7-0.4) ... Processing triggers for libc-bin (2.36-8) ... Processing triggers for sgml-base (1.31) ... Setting up docutils-common (0.19+dfsg-6) ... Processing triggers for sgml-base (1.31) ... Setting up python3-docutils (0.19+dfsg-6) ... Setting up python3-catkin-pkg (0.5.2-5) ... Setting up python3-rospkg (1.4.0-2) ... Setting up python3-rosdistro (0.9.0-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... usrmerge is already the newest version (35). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: user script /srv/workspace/pbuilder/31094/tmp/hooks/A99_set_merged_usr starting Re-configuring usrmerge... I: user script /srv/workspace/pbuilder/31094/tmp/hooks/A99_set_merged_usr finished hostname: Temporary failure in name resolution I: Running cd /build/ros-rosinstall-0.7.8/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../ros-rosinstall_0.7.8-6_source.changes dpkg-buildpackage: info: source package ros-rosinstall dpkg-buildpackage: info: source version 0.7.8-6 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jochen Sprickerhof dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean --buildsystem=pybuild dh_auto_clean -O--buildsystem=pybuild I: pybuild base:240: python3.11 setup.py clean /build/ros-rosinstall-0.7.8/setup.py:3: DeprecationWarning: the imp module is deprecated in favour of importlib and slated for removal in Python 3.12; see the module's documentation for alternative uses import imp running clean removing '/build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build' (and everything under it) 'build/bdist.linux-arm64' does not exist -- can't clean it 'build/scripts-3.11' does not exist -- can't clean it dh_autoreconf_clean -O--buildsystem=pybuild dh_clean -O--buildsystem=pybuild debian/rules binary dh binary --buildsystem=pybuild dh_update_autotools_config -O--buildsystem=pybuild dh_autoreconf -O--buildsystem=pybuild dh_auto_configure -O--buildsystem=pybuild I: pybuild base:240: python3.11 setup.py config /build/ros-rosinstall-0.7.8/setup.py:3: DeprecationWarning: the imp module is deprecated in favour of importlib and slated for removal in Python 3.12; see the module's documentation for alternative uses import imp running config dh_auto_build -O--buildsystem=pybuild I: pybuild base:240: /usr/bin/python3 setup.py build /build/ros-rosinstall-0.7.8/setup.py:3: DeprecationWarning: the imp module is deprecated in favour of importlib and slated for removal in Python 3.12; see the module's documentation for alternative uses import imp running build running build_py creating /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall copying src/rosinstall/setupfiles.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall copying src/rosinstall/rosws_stacks_cli.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall copying src/rosinstall/locate.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall copying src/rosinstall/distro_locate.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall copying src/rosinstall/rosws_cli.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall copying src/rosinstall/simple_checkout.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall copying src/rosinstall/rosinstall_cmd.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall copying src/rosinstall/rosinstall_cli.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall copying src/rosinstall/helpers.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall copying src/rosinstall/__version__.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall copying src/rosinstall/__init__.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall running build_scripts creating build creating build/scripts-3.11 copying and adjusting scripts/rosinstall -> build/scripts-3.11 copying and adjusting scripts/roslocate -> build/scripts-3.11 copying and adjusting scripts/rosws -> build/scripts-3.11 copying and adjusting scripts/rosco -> build/scripts-3.11 changing mode of build/scripts-3.11/rosinstall from 644 to 755 changing mode of build/scripts-3.11/roslocate from 644 to 755 changing mode of build/scripts-3.11/rosws from 644 to 755 changing mode of build/scripts-3.11/rosco from 644 to 755 dh_auto_test -O--buildsystem=pybuild I: pybuild base:240: cd /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build; python3.11 -m unittest discover -v test_get_manifest_current (test.local.test_locate.LocateTest.test_get_manifest_current) ... ok test_get_manifest_groovy (test.local.test_locate.LocateTest.test_get_manifest_groovy) ... ok test_get_with_branches (test.local.test_locate.LocateTest.test_get_with_branches) ... ok test_get_with_rosinstall (test.local.test_locate.LocateTest.test_get_with_rosinstall) ... ok test_getters (test.local.test_locate.LocateTest.test_getters) ... ok test_getters_empty (test.local.test_locate.LocateTest.test_getters_empty) ... Warning: No specific branch data for branch "devel" found, falling back on default checkout Warning: No specific branch data for branch "release" found, falling back on default checkout ok test_getters_invalid (test.local.test_locate.LocateTest.test_getters_invalid) ... Warning: No specific branch data for branch "devel" found, falling back on default checkout ok hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmpydyl6vcy/ros/.git/ [master (root-commit) c75d0d0] initial Author: Your Name 4 files changed, 4 insertions(+) create mode 100755 bin/rosmake create mode 100755 bin/rospack create mode 100644 setup.sh create mode 100644 stack.xml hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmpydyl6vcy/gitrepo/.git/ [master (root-commit) d9114e5] initial Author: Your Name 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644 gitfixed.txt test_cmd_generate_ros_files_build (test.local.test_ros_cli.RosinstallCommandLineGenerationTest.test_cmd_generate_ros_files_build) ... Using ROS_ROOT: /tmp/tmpydyl6vcy/local.rosinstall Writing /tmp/tmpydyl6vcy/ws2b/.rosinstall Cloning into '/tmp/tmpydyl6vcy/ws2b/ros_comm'... done. Cloning into '/tmp/tmpydyl6vcy/ws2b/ros'... done. updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved ok test_cmd_generate_ros_files_catkin (test.local.test_ros_cli.RosinstallCommandLineGenerationTest.test_cmd_generate_ros_files_catkin) ... ok test_cmd_generate_ros_files_catkinpp (test.local.test_ros_cli.RosinstallCommandLineGenerationTest.test_cmd_generate_ros_files_catkinpp) ... ok test_cmd_generate_ros_files_simple (test.local.test_ros_cli.RosinstallCommandLineGenerationTest.test_cmd_generate_ros_files_simple) ... ok test_cmd_generate_ros_files_vcs (test.local.test_ros_cli.RosinstallCommandLineGenerationTest.test_cmd_generate_ros_files_vcs) ... ok test_cmd_init (test.local.test_ros_cli.RosinstallCommandLineGenerationTest.test_cmd_init) ... [ros_comm] Fetching /tmp/tmpydyl6vcy/gitrepo (version None) to /tmp/tmpydyl6vcy/ws2b/ros_comm [ros_comm] Done. [ros] Fetching /tmp/tmpydyl6vcy/ros (version None) to /tmp/tmpydyl6vcy/ws2b/ros [ros] Done. [hgrepo] Fetching /tmp/tmpydyl6vcy/hgrepo (version None) to /tmp/tmpydyl6vcy/ws2b/hgrepo [hgrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpydyl6vcy/ws2b rosinstall update complete. Type 'source /tmp/tmpydyl6vcy/ws2b/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpydyl6vcy/ws (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpydyl6vcy/ws2 Using ROS_ROOT: /tmp/tmpydyl6vcy/ros Writing /tmp/tmpydyl6vcy/ws5/.rosinstall ok test_cmd_init_catkin (test.local.test_ros_cli.RosinstallCommandLineGenerationTest.test_cmd_init_catkin) ... (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpydyl6vcy/ws5 rosinstall update complete. Type 'source /tmp/tmpydyl6vcy/ws5/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Merge caused no change, no new elements found Using ROS_ROOT: /tmp/tmpydyl6vcy/ros Writing /tmp/tmpydyl6vcy/ws6/.rosinstall ok test_cmd_init_catkin2 (test.local.test_ros_cli.RosinstallCommandLineGenerationTest.test_cmd_init_catkin2) ... rosinstall update complete. Using ROS_ROOT: /tmp/tmpydyl6vcy/ros Writing /tmp/tmpydyl6vcy/ws7/.rosinstall ok test_cmd_init_catkinpp (test.local.test_ros_cli.RosinstallCommandLineGenerationTest.test_cmd_init_catkinpp) ... rosinstall update complete. Using ROS_ROOT: /tmp/tmpydyl6vcy/ros Writing /tmp/tmpydyl6vcy/ws8/.rosinstall ok test_cmd_init_main (test.local.test_ros_cli.RosinstallCommandLineGenerationTest.test_cmd_init_main) ... rosinstall update complete. rosws is a command to manipulate ROS workspaces. rosws replaces its predecessor rosinstall. Official usage: rosws CMD [ARGS] [OPTIONS] rosws will try to infer install path from context Type 'rosws help' for usage. help provide help for commands init set up a directory as workspace set add or changes one entry from your workspace config merge merges your workspace with another config set remove (rm) remove an entry from your workspace config, without deleting files scrape interactively add all found unmanaged VCS subfolders to workspace update (up) update or check out some of your config elements info Overview of some entries export export a snapshot of the workspace status (st) print the change status of files in some SCM controlled entries diff (di) print a diff over some SCM controlled entries foreach run shell command in given entries regenerate create ROS workspace specific setup files Writing /tmp/tmpydyl6vcy/ws11/.rosinstall (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpydyl6vcy/ws11 rosinstall update complete. Type 'source /tmp/tmpydyl6vcy/ws11/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells workspace: /tmp/tmpydyl6vcy/ws11 ROS_ROOT: None workspace: /tmp/tmpydyl6vcy/ws11 ROS_ROOT: None workspace: /tmp/tmpydyl6vcy/ws11 ROS_ROOT: None ok test_cmd_init_makedir (test.local.test_ros_cli.RosinstallCommandLineGenerationTest.test_cmd_init_makedir) ... Using ROS_ROOT: /tmp/tmpydyl6vcy/ros Writing /tmp/tmpydyl6vcy/ws9/.rosinstall ok test_cmd_init_no_ros (test.local.test_ros_cli.RosinstallCommandLineGenerationTest.test_cmd_init_no_ros) ... (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpydyl6vcy/ws9 rosinstall update complete. Type 'source /tmp/tmpydyl6vcy/ws9/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Writing /tmp/tmpydyl6vcy/ws10/.rosinstall (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpydyl6vcy/ws10 rosinstall update complete. Type 'source /tmp/tmpydyl6vcy/ws10/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Writing /tmp/tmpydyl6vcy/ws10/.rosinstall ok test_cmd_remove (test.local.test_ros_cli.RosinstallCommandLineGenerationTest.test_cmd_remove) ... (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpydyl6vcy/ws10 rosinstall update complete. Type 'source /tmp/tmpydyl6vcy/ws10/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Using ROS_ROOT: /tmp/tmpydyl6vcy/ros Writing /tmp/tmpydyl6vcy/ws12/.rosinstall ok test_init_parallel (test.local.test_ros_cli.RosinstallCommandLineGenerationTest.test_init_parallel) ... (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpydyl6vcy/ws12 rosinstall update complete. Type 'source /tmp/tmpydyl6vcy/ws12/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Performing actions: Add new elements: /tmp/tmpydyl6vcy/gitrepo Config changed, maybe you need run rosws update to update SCM entries. Overwriting /tmp/tmpydyl6vcy/ws12/.rosinstall update complete. Performing actions: Add new elements: /tmp/tmpydyl6vcy/hgrepo Config changed, maybe you need run rosws update to update SCM entries. Overwriting /tmp/tmpydyl6vcy/ws12/.rosinstall update complete. Overwriting /tmp/tmpydyl6vcy/ws12/.rosinstall Removed entries ['/tmp/tmpydyl6vcy/gitrepo'] Using ROS_ROOT: /tmp/tmpydyl6vcy/simple.rosinstall Writing /tmp/tmpydyl6vcy/ws13a/.rosinstall Cloning into '/tmp/tmpydyl6vcy/ws13a/ros'... Cloning into '/tmp/tmpydyl6vcy/ws13a/gitrepo'... done. done. [ros] Fetching /tmp/tmpydyl6vcy/ros (version None) to /tmp/tmpydyl6vcy/ws13a/ros [ros] Done. [gitrepo] Fetching /tmp/tmpydyl6vcy/gitrepo (version None) to /tmp/tmpydyl6vcy/ws13a/gitrepo [gitrepo] Done. ok test_setup_sh (test.local.test_ros_cli.RosinstallCommandLineGenerationTest.test_setup_sh) ... [ros,gitrepo] still active (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpydyl6vcy/ws13a rosinstall update complete. Type 'source /tmp/tmpydyl6vcy/ws13a/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Using ROS_ROOT: /tmp/tmpydyl6vcy/simple.rosinstall Writing /tmp/tmpydyl6vcy/ws13/.rosinstall Cloning into '/tmp/tmpydyl6vcy/ws13/ros'... done. Cloning into '/tmp/tmpydyl6vcy/ws13/gitrepo'... done. ok test_setup_sh_relother (test.local.test_ros_cli.RosinstallCommandLineGenerationTest.test_setup_sh_relother) ... [ros] Fetching /tmp/tmpydyl6vcy/ros (version None) to /tmp/tmpydyl6vcy/ws13/ros [ros] Done. [gitrepo] Fetching /tmp/tmpydyl6vcy/gitrepo (version None) to /tmp/tmpydyl6vcy/ws13/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpydyl6vcy/ws13 rosinstall update complete. Type 'source /tmp/tmpydyl6vcy/ws13/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Using ROS_ROOT: /tmp/tmpydyl6vcy/simple_rel2.rosinstall Writing /tmp/tmpydyl6vcy/ws15/.rosinstall Cloning into '/tmp/tmpydyl6vcy/ws15/ros'... done. ok test_setup_sh_relros (test.local.test_ros_cli.RosinstallCommandLineGenerationTest.test_setup_sh_relros) ... [ros] Fetching /tmp/tmpydyl6vcy/ros (version None) to /tmp/tmpydyl6vcy/ws15/ros [ros] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpydyl6vcy/ws15 rosinstall update complete. Type 'source /tmp/tmpydyl6vcy/ws15/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Using ROS_ROOT: /tmp/tmpydyl6vcy/simple_rel.rosinstall Writing /tmp/tmpydyl6vcy/ws14/.rosinstall Cloning into '/tmp/tmpydyl6vcy/ws14/ros'... done. ok hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmpj0cfzp5d/ros/.git/ [master (root-commit) c9f5365] initial Author: Your Name 4 files changed, 4 insertions(+) create mode 100755 bin/rosmake create mode 100755 bin/rospack create mode 100644 setup.sh create mode 100644 stack.xml hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmpj0cfzp5d/gitrepo/.git/ [master (root-commit) 7d5cc5b] initial Author: Your Name 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644 gitfixed.txt test_require_bootstrap (test.local.test_ros_cli.RosinstallCommandlineTest.test_require_bootstrap) ... ok hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmp08nt2g94/ros/.git/ [master (root-commit) e40256f] initial Author: Your Name 4 files changed, 4 insertions(+) create mode 100755 bin/rosmake create mode 100755 bin/rospack create mode 100644 setup.sh create mode 100644 stack.xml hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmp08nt2g94/gitrepo/.git/ [master (root-commit) f97f8b5] initial Author: Your Name 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644 gitfixed.txt test_Rosinstall_ros_with_folder (test.local.test_rosinstall.RosinstallCommandlineOverlays.test_Rosinstall_ros_with_folder) Use a folder as a remote rosinstall location ... [ros] Fetching /tmp/tmpydyl6vcy/ros (version None) to /tmp/tmpydyl6vcy/ws14/ros [ros] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpydyl6vcy/ws14 rosinstall update complete. Type 'source /tmp/tmpydyl6vcy/ws14/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmpaa_wtst9 from specifications in rosinstall files /tmp/tmp08nt2g94/simple.rosinstall (Over-)Writing /tmp/tmpaa_wtst9/.rosinstall Cloning into '/tmp/tmpaa_wtst9/ros'... done. Cloning into '/tmp/tmpaa_wtst9/gitrepo'... done. [ros] Fetching /tmp/tmp08nt2g94/ros (version None) to /tmp/tmpaa_wtst9/ros [ros] Done. [gitrepo] Fetching /tmp/tmp08nt2g94/gitrepo (version None) to /tmp/tmpaa_wtst9/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpaa_wtst9 rosinstall update complete. Now, type 'source /tmp/tmpaa_wtst9/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmpmb08jezp from specifications in rosinstall files /tmp/tmpaa_wtst9 (Over-)Writing /tmp/tmpmb08jezp/.rosinstall ok test_Rosinstall_rosinstall_file_input (test.local.test_rosinstall.RosinstallCommandlineOverlays.test_Rosinstall_rosinstall_file_input) uses base rosinstall with ros and git repo ... (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpmb08jezp rosinstall update complete. Now, type 'source /tmp/tmpmb08jezp/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmp21kg71ja from specifications in rosinstall files /tmp/tmp08nt2g94/simple.rosinstall (Over-)Writing /tmp/tmp21kg71ja/.rosinstall Cloning into '/tmp/tmp21kg71ja/ros'... done. Cloning into '/tmp/tmp21kg71ja/gitrepo'... done. [ros] Fetching /tmp/tmp08nt2g94/ros (version None) to /tmp/tmp21kg71ja/ros [ros] Done. [gitrepo] Fetching /tmp/tmp08nt2g94/gitrepo (version None) to /tmp/tmp21kg71ja/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp21kg71ja rosinstall update complete. Now, type 'source /tmp/tmp21kg71ja/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmptvfod9tl from specifications in rosinstall files /tmp/tmp21kg71ja (Over-)Writing /tmp/tmptvfod9tl/.rosinstall ok test_Rosinstall_rosinstall_file_input_add (test.local.test_rosinstall.RosinstallCommandlineOverlays.test_Rosinstall_rosinstall_file_input_add) uses base ros folders and adds a stack ... (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmptvfod9tl rosinstall update complete. Now, type 'source /tmp/tmptvfod9tl/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmp1ajez6c2 from specifications in rosinstall files /tmp/tmp08nt2g94/simple.rosinstall (Over-)Writing /tmp/tmp1ajez6c2/.rosinstall Cloning into '/tmp/tmp1ajez6c2/ros'... done. Cloning into '/tmp/tmp1ajez6c2/gitrepo'... done. [ros] Fetching /tmp/tmp08nt2g94/ros (version None) to /tmp/tmp1ajez6c2/ros [ros] Done. [gitrepo] Fetching /tmp/tmp08nt2g94/gitrepo (version None) to /tmp/tmp1ajez6c2/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp1ajez6c2 rosinstall update complete. Now, type 'source /tmp/tmp1ajez6c2/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells !!!!! Warning: Not recursing into other config folder /tmp/tmp1ajez6c2 containing file .rosinstall rosinstall operating on /tmp/tmpfroykntd from specifications in rosinstall files /tmp/tmp08nt2g94/ros, /tmp/tmp08nt2g94/local2.rosinstall (Over-)Writing /tmp/tmpfroykntd/.rosinstall updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved ok test_Rosinstall_rosinstall_file_input_ros_only (test.local.test_rosinstall.RosinstallCommandlineOverlays.test_Rosinstall_rosinstall_file_input_ros_only) uses base ros folder ... [gitrepo] Fetching /tmp/tmp08nt2g94/hgrepo (version None) to /tmp/tmpfroykntd/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpfroykntd rosinstall update complete. Now, type 'source /tmp/tmpfroykntd/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmpblr36ujn from specifications in rosinstall files /tmp/tmp08nt2g94/simple.rosinstall (Over-)Writing /tmp/tmpblr36ujn/.rosinstall Cloning into '/tmp/tmpblr36ujn/ros'... done. Cloning into '/tmp/tmpblr36ujn/gitrepo'... done. [ros] Fetching /tmp/tmp08nt2g94/ros (version None) to /tmp/tmpblr36ujn/ros [ros] Done. [gitrepo] Fetching /tmp/tmp08nt2g94/gitrepo (version None) to /tmp/tmpblr36ujn/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpblr36ujn rosinstall update complete. Now, type 'source /tmp/tmpblr36ujn/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells !!!!! Warning: Not recursing into other config folder /tmp/tmpblr36ujn containing file .rosinstall rosinstall operating on /tmp/tmpap1utkri from specifications in rosinstall files /tmp/tmp08nt2g94/ros, /tmp/tmp08nt2g94/local.rosinstall (Over-)Writing /tmp/tmpap1utkri/.rosinstall ok hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmptzoxwcem/ros/.git/ [master (root-commit) b894c96] initial Author: Your Name 4 files changed, 4 insertions(+) create mode 100755 bin/rosmake create mode 100755 bin/rospack create mode 100644 setup.sh create mode 100644 stack.xml hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmptzoxwcem/gitrepo/.git/ [master (root-commit) 1a89d38] initial Author: Your Name 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644 gitfixed.txt test_Rosinstall_ros_with_folder_and_setupfile (test.local.test_rosinstall.RosinstallCommandlineOverlaysWithSetup.test_Rosinstall_ros_with_folder_and_setupfile) ... (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpap1utkri rosinstall update complete. Now, type 'source /tmp/tmpap1utkri/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmpuyx8q8ee from specifications in rosinstall files /tmp/tmptzoxwcem/simple_fuerte.rosinstall (Over-)Writing /tmp/tmpuyx8q8ee/.rosinstall Cloning into '/tmp/tmpuyx8q8ee/ros'... done. updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [ros] Fetching /tmp/tmptzoxwcem/ros (version None) to /tmp/tmpuyx8q8ee/ros [ros] Done. [hgrepo] Fetching /tmp/tmptzoxwcem/hgrepo (version None) to /tmp/tmpuyx8q8ee/hgrepo [hgrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpuyx8q8ee rosinstall update complete. Now, type 'source /tmp/tmpuyx8q8ee/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmperl6g9m3 from specifications in rosinstall files /tmp/tmpuyx8q8ee (Over-)Writing /tmp/tmperl6g9m3/.rosinstall ok test_Rosinstall_rosinstall_file_input_with_setupfile (test.local.test_rosinstall.RosinstallCommandlineOverlaysWithSetup.test_Rosinstall_rosinstall_file_input_with_setupfile) ... (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmperl6g9m3 rosinstall update complete. Now, type 'source /tmp/tmperl6g9m3/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmp5z_wd2ym from specifications in rosinstall files /tmp/tmptzoxwcem/simple_fuerte.rosinstall (Over-)Writing /tmp/tmp5z_wd2ym/.rosinstall Cloning into '/tmp/tmp5z_wd2ym/ros'... done. updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [ros] Fetching /tmp/tmptzoxwcem/ros (version None) to /tmp/tmp5z_wd2ym/ros [ros] Done. [hgrepo] Fetching /tmp/tmptzoxwcem/hgrepo (version None) to /tmp/tmp5z_wd2ym/hgrepo [hgrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp5z_wd2ym rosinstall update complete. Now, type 'source /tmp/tmp5z_wd2ym/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells !!!!! Warning: Not recursing into other config folder /tmp/tmp5z_wd2ym containing file .rosinstall rosinstall operating on /tmp/tmpq2ygsg62 from specifications in rosinstall files /tmp/tmptzoxwcem/ros, /tmp/tmptzoxwcem/local.rosinstall (Over-)Writing /tmp/tmpq2ygsg62/.rosinstall updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved ok test_prereq (test.local.test_rosinstall.RosinstallLocalDistro.test_prereq) ... ok test_get_ros_package_path (test.local.test_rosinstall_standalone_functions.FunctionsTest.test_get_ros_package_path) ... ok test_get_ros_stack_path (test.local.test_rosinstall_standalone_functions.FunctionsTest.test_get_ros_stack_path) ... ok test_is_path_ros (test.local.test_rosinstall_standalone_functions.FunctionsTest.test_is_path_ros) ... ok test_is_path_stack (test.local.test_rosinstall_standalone_functions.FunctionsTest.test_is_path_stack) ... ok test_is_ros_in_setupfile (test.local.test_rosinstall_standalone_functions.FunctionsTest.test_is_ros_in_setupfile) ... ok hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmpexynjlde/ros/.git/ [master (root-commit) c5f8a9a] initial Author: Your Name 4 files changed, 4 insertions(+) create mode 100755 bin/rosmake create mode 100755 bin/rospack create mode 100644 setup.sh create mode 100644 stack.xml hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmpexynjlde/gitrepo/.git/ [master (root-commit) fd6aeeb] initial Author: Your Name 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644 gitfixed.txt test_info_only (test.local.test_rosws.RosWsTest.test_info_only) ... [hgrepo] Fetching /tmp/tmptzoxwcem/hgrepo (version None) to /tmp/tmpq2ygsg62/hgrepo [hgrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpq2ygsg62 rosinstall update complete. Now, type 'source /tmp/tmpq2ygsg62/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Using ROS_ROOT: /tmp/tmpexynjlde/simple.rosinstall Writing /tmp/tmpexynjlde/ws7/.rosinstall Cloning into '/tmp/tmpexynjlde/ws7/ros'... done. Cloning into '/tmp/tmpexynjlde/ws7/gitrepo'... done. ok test_init (test.local.test_rosws.RosWsTest.test_init) ... Usage: rosws init [TARGET_PATH [SOURCE_PATH]]? python3.11 -m unittest: error: Too many arguments Cloning into '/tmp/tmpexynjlde/ws1/ros'... done. Cloning into '/tmp/tmpexynjlde/ws1/gitrepo'... done. [ros] Fetching /tmp/tmpexynjlde/ros (version None) to /tmp/tmpexynjlde/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpexynjlde/gitrepo (version None) to /tmp/tmpexynjlde/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpexynjlde/ws7 rosinstall update complete. Type 'source /tmp/tmpexynjlde/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells ok test_init_parallel (test.local.test_rosws.RosWsTest.test_init_parallel) ... Cloning into '/tmp/tmpexynjlde/ws1d/ros'... Cloning into '/tmp/tmpexynjlde/ws1d/gitrepo'... done. done. [ros] Fetching /tmp/tmpexynjlde/ros (version None) to /tmp/tmpexynjlde/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpexynjlde/gitrepo (version None) to /tmp/tmpexynjlde/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpexynjlde/ws7 rosinstall update complete. Type 'source /tmp/tmpexynjlde/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells ok test_init_pwd (test.local.test_rosws.RosWsTest.test_init_pwd) ... [ros] Fetching /tmp/tmpexynjlde/ros (version None) to /tmp/tmpexynjlde/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpexynjlde/gitrepo (version None) to /tmp/tmpexynjlde/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpexynjlde/ws7 rosinstall update complete. Type 'source /tmp/tmpexynjlde/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells ok test_merge (test.local.test_rosws.RosWsTest.test_merge) ... Cloning into '/tmp/tmpexynjlde/ws2/ros'... done. Cloning into '/tmp/tmpexynjlde/ws2/gitrepo'... done. [ros] Fetching /tmp/tmpexynjlde/ros (version None) to /tmp/tmpexynjlde/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpexynjlde/gitrepo (version None) to /tmp/tmpexynjlde/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpexynjlde/ws7 rosinstall update complete. Type 'source /tmp/tmpexynjlde/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells /usr/lib/python3/dist-packages/vcstools/git.py:225: DeprecationWarning: distutils Version classes are deprecated. Use packaging.version instead. if LooseVersion(self.gitversion) > LooseVersion('1.7'): updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [ros] Fetching /tmp/tmpexynjlde/ros (version None) to /tmp/tmpexynjlde/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpexynjlde/gitrepo (version None) to /tmp/tmpexynjlde/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpexynjlde/ws7 rosinstall update complete. Type 'source /tmp/tmpexynjlde/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells ok test_remove (test.local.test_rosws.RosWsTest.test_remove) ... Cloning into '/tmp/tmpexynjlde/ws3/ros'... done. Cloning into '/tmp/tmpexynjlde/ws3/gitrepo'... done. [ros] Fetching /tmp/tmpexynjlde/ros (version None) to /tmp/tmpexynjlde/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpexynjlde/gitrepo (version None) to /tmp/tmpexynjlde/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpexynjlde/ws7 rosinstall update complete. Type 'source /tmp/tmpexynjlde/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [ros] Fetching /tmp/tmpexynjlde/ros (version None) to /tmp/tmpexynjlde/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpexynjlde/gitrepo (version None) to /tmp/tmpexynjlde/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpexynjlde/ws7 rosinstall update complete. Type 'source /tmp/tmpexynjlde/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells ok test_set_add_plain (test.local.test_rosws.RosWsTest.test_set_add_plain) ... Cloning into '/tmp/tmpexynjlde/ws5/ros'... done. Cloning into '/tmp/tmpexynjlde/ws5/gitrepo'... done. [ros] Fetching /tmp/tmpexynjlde/ros (version None) to /tmp/tmpexynjlde/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpexynjlde/gitrepo (version None) to /tmp/tmpexynjlde/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpexynjlde/ws7 rosinstall update complete. Type 'source /tmp/tmpexynjlde/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells ok test_set_add_scm (test.local.test_rosws.RosWsTest.test_set_add_scm) ... Cloning into '/tmp/tmpexynjlde/ws6/ros'... done. Cloning into '/tmp/tmpexynjlde/ws6/gitrepo'... done. [ros] Fetching /tmp/tmpexynjlde/ros (version None) to /tmp/tmpexynjlde/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpexynjlde/gitrepo (version None) to /tmp/tmpexynjlde/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpexynjlde/ws7 rosinstall update complete. Type 'source /tmp/tmpexynjlde/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [ros] Fetching /tmp/tmpexynjlde/ros (version None) to /tmp/tmpexynjlde/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpexynjlde/gitrepo (version None) to /tmp/tmpexynjlde/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpexynjlde/ws7 rosinstall update complete. Type 'source /tmp/tmpexynjlde/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells /usr/lib/python3/dist-packages/vcstools/git.py:225: DeprecationWarning: distutils Version classes are deprecated. Use packaging.version instead. if LooseVersion(self.gitversion) > LooseVersion('1.7'): pulling from /tmp/tmpexynjlde/hgrepo searching for changes no changes found 0 files updated, 0 files merged, 1 files removed, 0 files unresolved [ros] Fetching /tmp/tmpexynjlde/ros (version None) to /tmp/tmpexynjlde/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpexynjlde/gitrepo (version None) to /tmp/tmpexynjlde/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpexynjlde/ws7 rosinstall update complete. Type 'source /tmp/tmpexynjlde/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells pulling from /tmp/tmpexynjlde/hgrepo searching for changes no changes found 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [ros] Fetching /tmp/tmpexynjlde/ros (version None) to /tmp/tmpexynjlde/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpexynjlde/gitrepo (version None) to /tmp/tmpexynjlde/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpexynjlde/ws7 rosinstall update complete. Type 'source /tmp/tmpexynjlde/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells ok test_set_add_scm_change_localname (test.local.test_rosws.RosWsTest.test_set_add_scm_change_localname) ... [ros] Fetching /tmp/tmpexynjlde/ros (version None) to /tmp/tmpexynjlde/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpexynjlde/gitrepo (version None) to /tmp/tmpexynjlde/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpexynjlde/ws7 rosinstall update complete. Type 'source /tmp/tmpexynjlde/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Usage: rosws set [localname] [[SCM-URI] --(detached|svn|hg|git|bzr) [--version=VERSION]?]? python3.11 -m unittest: error: Cannot decide which one you want to add: /tmp/tmpexynjlde/gitrepo /tmp/tmpexynjlde/ws8/gitrepo ok test_set_detached (test.local.test_rosws.RosWsTest.test_set_detached) ... Cloning into '/tmp/tmpexynjlde/ws4/ros'... done. Cloning into '/tmp/tmpexynjlde/ws4/gitrepo'... done. [ros] Fetching /tmp/tmpexynjlde/ros (version None) to /tmp/tmpexynjlde/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpexynjlde/gitrepo (version None) to /tmp/tmpexynjlde/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpexynjlde/ws7 rosinstall update complete. Type 'source /tmp/tmpexynjlde/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [ros] Fetching /tmp/tmpexynjlde/ros (version None) to /tmp/tmpexynjlde/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpexynjlde/gitrepo (version None) to /tmp/tmpexynjlde/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpexynjlde/ws7 rosinstall update complete. Type 'source /tmp/tmpexynjlde/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells ok hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmpwhi4amy4/ros/.git/ [master (root-commit) 9853751] initial Author: Your Name 4 files changed, 4 insertions(+) create mode 100755 bin/rosmake create mode 100755 bin/rospack create mode 100644 setup.sh create mode 100644 stack.xml hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmpwhi4amy4/gitrepo/.git/ [master (root-commit) 8ec4929] initial Author: Your Name 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644 gitfixed.txt test_gen_setup (test.local.test_setupfiles.GenerateTest.test_gen_setup) ... ok test_gen_setup_bash (test.local.test_setupfiles.GenerateTest.test_gen_setup_bash) ... ok test_gen_setupsh (test.local.test_setupfiles.GenerateTest.test_gen_setupsh) ... ok test_source_setup_sh (test.local.test_setupfiles.GenerateTest.test_source_setup_sh) ... There is no file at /tmp/tmpwhi4amy4/workspacetest/.rosinstall Could not parse .rosinstall file warn: no such file : ERROR basename: missing operand Try 'basename --help' for more information. /usr/lib/python3.11/subprocess.py:1125: ResourceWarning: subprocess 5760 is still running _warn("subprocess %s is still running" % self.pid, ResourceWarning: Enable tracemalloc to get the object allocation traceback ok test_source_setup_sh_chain (test.local.test_setupfiles.GenerateTest.test_source_setup_sh_chain) Tests chaining of workspaces, which is fragile because ... /usr/lib/python3.11/subprocess.py:1125: ResourceWarning: subprocess 5877 is still running _warn("subprocess %s is still running" % self.pid, ResourceWarning: Enable tracemalloc to get the object allocation traceback /usr/lib/python3.11/subprocess.py:1125: ResourceWarning: subprocess 6178 is still running _warn("subprocess %s is still running" % self.pid, ResourceWarning: Enable tracemalloc to get the object allocation traceback ok test_gen_python_code (test.local.test_setupfiles.Genfiletest.test_gen_python_code) ... ok test_gen_python_code_python3 (test.local.test_setupfiles.Genfiletest.test_gen_python_code_python3) ... ok ---------------------------------------------------------------------- Ran 54 tests in 78.150s OK [ros] Fetching /tmp/tmpexynjlde/ros (version None) to /tmp/tmpexynjlde/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmpexynjlde/gitrepo (version None) to /tmp/tmpexynjlde/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpexynjlde/ws7 rosinstall update complete. Type 'source /tmp/tmpexynjlde/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells create-stamp debian/debhelper-build-stamp dh_testroot -O--buildsystem=pybuild dh_prep -O--buildsystem=pybuild dh_auto_install --destdir=debian/python3-rosinstall/ -O--buildsystem=pybuild I: pybuild base:240: /usr/bin/python3 setup.py install --root /build/ros-rosinstall-0.7.8/debian/python3-rosinstall /build/ros-rosinstall-0.7.8/setup.py:3: DeprecationWarning: the imp module is deprecated in favour of importlib and slated for removal in Python 3.12; see the module's documentation for alternative uses import imp running install /usr/lib/python3/dist-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools. warnings.warn( running build running build_py running build_scripts running install_lib creating /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr creating /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib creating /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11 creating /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages creating /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall creating /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall/__pycache__/rosinstall_cli.cpython-311.pyc -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall/__pycache__/helpers.cpython-311.pyc -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall/__pycache__/__version__.cpython-311.pyc -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall/__pycache__/setupfiles.cpython-311.pyc -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall/__pycache__/rosinstall_cmd.cpython-311.pyc -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall/__pycache__/rosws_cli.cpython-311.pyc -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall/__pycache__/locate.cpython-311.pyc -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall/__pycache__/__init__.cpython-311.pyc -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall/__init__.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall/__version__.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall/helpers.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall/rosinstall_cli.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall/rosinstall_cmd.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall/simple_checkout.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall/rosws_cli.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall/distro_locate.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall/locate.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall/rosws_stacks_cli.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.11/build/rosinstall/setupfiles.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall/__init__.py to __init__.cpython-311.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall/__version__.py to __version__.cpython-311.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall/helpers.py to helpers.cpython-311.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall/rosinstall_cli.py to rosinstall_cli.cpython-311.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall/rosinstall_cmd.py to rosinstall_cmd.cpython-311.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall/simple_checkout.py to simple_checkout.cpython-311.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall/rosws_cli.py to rosws_cli.cpython-311.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall/distro_locate.py to distro_locate.cpython-311.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall/locate.py to locate.cpython-311.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall/rosws_stacks_cli.py to rosws_stacks_cli.cpython-311.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall/setupfiles.py to setupfiles.cpython-311.pyc running install_egg_info running egg_info creating src/rosinstall.egg-info writing src/rosinstall.egg-info/PKG-INFO writing dependency_links to src/rosinstall.egg-info/dependency_links.txt writing requirements to src/rosinstall.egg-info/requires.txt writing top-level names to src/rosinstall.egg-info/top_level.txt writing manifest file 'src/rosinstall.egg-info/SOURCES.txt' reading manifest file 'src/rosinstall.egg-info/SOURCES.txt' adding license file 'LICENSE' writing manifest file 'src/rosinstall.egg-info/SOURCES.txt' Copying src/rosinstall.egg-info to /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.11/dist-packages/rosinstall-0.7.8.egg-info Skipping SOURCES.txt running install_scripts creating /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin copying build/scripts-3.11/rosco -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin copying build/scripts-3.11/rosws -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin copying build/scripts-3.11/roslocate -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin copying build/scripts-3.11/rosinstall -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin changing mode of /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin/rosco to 755 changing mode of /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin/rosws to 755 changing mode of /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin/roslocate to 755 changing mode of /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin/rosinstall to 755 dh_installdocs -O--buildsystem=pybuild dh_installchangelogs -O--buildsystem=pybuild dh_python3 -O--buildsystem=pybuild dh_installsystemduser -O--buildsystem=pybuild dh_perl -O--buildsystem=pybuild dh_link -O--buildsystem=pybuild dh_strip_nondeterminism -O--buildsystem=pybuild dh_compress -O--buildsystem=pybuild dh_fixperms -O--buildsystem=pybuild dh_missing -O--buildsystem=pybuild dh_installdeb -O--buildsystem=pybuild dh_gencontrol -O--buildsystem=pybuild dh_md5sums -O--buildsystem=pybuild dh_builddeb -O--buildsystem=pybuild dpkg-deb: building package 'python3-rosinstall' in '../python3-rosinstall_0.7.8-6_all.deb'. dpkg-genbuildinfo --build=binary -O../ros-rosinstall_0.7.8-6_arm64.buildinfo dpkg-genchanges --build=binary -O../ros-rosinstall_0.7.8-6_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/31094/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/31094/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/31094 and its subdirectories I: Current time: Sat May 11 08:51:19 +14 2024 I: pbuilder-time-stamp: 1715367079