I: pbuilder: network access will be disabled during build I: Current time: Thu May 28 03:59:21 -12 2020 I: pbuilder-time-stamp: 1590681561 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [bip_0.9.0~rc3-1.dsc] I: copying [./bip_0.9.0~rc3.orig.tar.gz] I: copying [./bip_0.9.0~rc3-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Sun Apr 1 13:35:32 2018 -12 gpgv: using RSA key 72972A83E526453DF2885F8155E9F9F7AC1C443F gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./bip_0.9.0~rc3-1.dsc dpkg-source: info: extracting bip in bip-0.9.0~rc3 dpkg-source: info: unpacking bip_0.9.0~rc3.orig.tar.gz dpkg-source: info: unpacking bip_0.9.0~rc3-1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 11~), bison, flex, libssl-dev, autoconf-archive dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 11~); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on bison; however: Package bison is not installed. pbuilder-satisfydepends-dummy depends on flex; however: Package flex is not installed. pbuilder-satisfydepends-dummy depends on libssl-dev; however: Package libssl-dev is not installed. pbuilder-satisfydepends-dummy depends on autoconf-archive; however: Package autoconf-archive is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} autoconf-archive{a} automake{a} autopoint{a} autotools-dev{a} bison{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} flex{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbison-dev{a} libbsd0{a} libcroco3{a} libelf1{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libncurses6{a} libpipeline1{a} libsigsegv2{a} libssl-dev{a} libssl1.1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libfl-dev libglib2.0-data libgpm2 libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 39 newly installed, 0 to remove and 0 not upgraded. Need to get 23.6 MB of archives. After unpacking 81.7 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main armhf libbsd0 armhf 0.9.1-2 [103 kB] Get: 2 http://deb.debian.org/debian buster/main armhf bsdmainutils armhf 11.1.2+b1 [186 kB] Get: 3 http://deb.debian.org/debian buster/main armhf libuchardet0 armhf 0.0.6-3 [62.2 kB] Get: 4 http://deb.debian.org/debian buster/main armhf groff-base armhf 1.22.4-3 [828 kB] Get: 5 http://deb.debian.org/debian buster/main armhf libpipeline1 armhf 1.5.1-2 [26.8 kB] Get: 6 http://deb.debian.org/debian buster/main armhf man-db armhf 2.8.5-2 [1240 kB] Get: 7 http://deb.debian.org/debian buster/main armhf autoconf-archive all 20180313-1 [749 kB] Get: 8 http://deb.debian.org/debian buster/main armhf libsigsegv2 armhf 2.12-2 [32.1 kB] Get: 9 http://deb.debian.org/debian buster/main armhf m4 armhf 1.4.18-2 [190 kB] Get: 10 http://deb.debian.org/debian buster/main armhf flex armhf 2.6.4-6.2 [438 kB] Get: 11 http://deb.debian.org/debian buster/main armhf sensible-utils all 0.0.12 [15.8 kB] Get: 12 http://deb.debian.org/debian buster/main armhf libmagic-mgc armhf 1:5.35-4+deb10u1 [242 kB] Get: 13 http://deb.debian.org/debian buster/main armhf libmagic1 armhf 1:5.35-4+deb10u1 [110 kB] Get: 14 http://deb.debian.org/debian buster/main armhf file armhf 1:5.35-4+deb10u1 [65.5 kB] Get: 15 http://deb.debian.org/debian buster/main armhf gettext-base armhf 0.19.8.1-9 [118 kB] Get: 16 http://deb.debian.org/debian buster/main armhf autoconf all 2.69-11 [341 kB] Get: 17 http://deb.debian.org/debian buster/main armhf autotools-dev all 20180224.1 [77.0 kB] Get: 18 http://deb.debian.org/debian buster/main armhf automake all 1:1.16.1-4 [771 kB] Get: 19 http://deb.debian.org/debian buster/main armhf autopoint all 0.19.8.1-9 [434 kB] Get: 20 http://deb.debian.org/debian buster/main armhf libbison-dev armhf 2:3.3.2.dfsg-1 [500 kB] Get: 21 http://deb.debian.org/debian buster/main armhf bison armhf 2:3.3.2.dfsg-1 [848 kB] Get: 22 http://deb.debian.org/debian buster/main armhf libtool all 2.4.6-9 [547 kB] Get: 23 http://deb.debian.org/debian buster/main armhf dh-autoreconf all 19 [16.9 kB] Get: 24 http://deb.debian.org/debian buster/main armhf libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 25 http://deb.debian.org/debian buster/main armhf libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 26 http://deb.debian.org/debian buster/main armhf dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 27 http://deb.debian.org/debian buster/main armhf libelf1 armhf 0.176-1.1 [158 kB] Get: 28 http://deb.debian.org/debian buster/main armhf dwz armhf 0.12-3 [72.0 kB] Get: 29 http://deb.debian.org/debian buster/main armhf libglib2.0-0 armhf 2.58.3-2+deb10u2 [1101 kB] Get: 30 http://deb.debian.org/debian buster/main armhf libicu63 armhf 63.1-6+deb10u1 [8005 kB] Get: 31 http://deb.debian.org/debian buster/main armhf libxml2 armhf 2.9.4+dfsg1-7+b3 [595 kB] Get: 32 http://deb.debian.org/debian buster/main armhf libcroco3 armhf 0.6.12-3 [133 kB] Get: 33 http://deb.debian.org/debian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [79.8 kB] Get: 34 http://deb.debian.org/debian buster/main armhf gettext armhf 0.19.8.1-9 [1242 kB] Get: 35 http://deb.debian.org/debian buster/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 36 http://deb.debian.org/debian buster/main armhf po-debconf all 1.0.21 [248 kB] Get: 37 http://deb.debian.org/debian buster/main armhf debhelper all 12.1.1 [1016 kB] Get: 38 http://deb.debian.org/debian buster/main armhf libssl1.1 armhf 1.1.1d-0+deb10u3 [1299 kB] Get: 39 http://deb.debian.org/debian buster/main armhf libssl-dev armhf 1.1.1d-0+deb10u3 [1597 kB] Fetched 23.6 MB in 3s (7834 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_armhf.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../02-libuchardet0_0.0.6-3_armhf.deb ... Unpacking libuchardet0:armhf (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_armhf.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../04-libpipeline1_1.5.1-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_armhf.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package autoconf-archive. Preparing to unpack .../06-autoconf-archive_20180313-1_all.deb ... Unpacking autoconf-archive (20180313-1) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../07-libsigsegv2_2.12-2_armhf.deb ... Unpacking libsigsegv2:armhf (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../08-m4_1.4.18-2_armhf.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package flex. Preparing to unpack .../09-flex_2.6.4-6.2_armhf.deb ... Unpacking flex (2.6.4-6.2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../10-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../11-libmagic-mgc_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../12-libmagic1_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic1:armhf (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../13-file_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../14-gettext-base_0.19.8.1-9_armhf.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package autoconf. Preparing to unpack .../15-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../16-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../17-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../18-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libbison-dev:armhf. Preparing to unpack .../19-libbison-dev_2%3a3.3.2.dfsg-1_armhf.deb ... Unpacking libbison-dev:armhf (2:3.3.2.dfsg-1) ... Selecting previously unselected package bison. Preparing to unpack .../20-bison_2%3a3.3.2.dfsg-1_armhf.deb ... Unpacking bison (2:3.3.2.dfsg-1) ... Selecting previously unselected package libtool. Preparing to unpack .../21-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../22-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../23-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../24-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../25-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../26-libelf1_0.176-1.1_armhf.deb ... Unpacking libelf1:armhf (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../27-dwz_0.12-3_armhf.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../28-libglib2.0-0_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:armhf. Preparing to unpack .../29-libicu63_63.1-6+deb10u1_armhf.deb ... Unpacking libicu63:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../30-libxml2_2.9.4+dfsg1-7+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../31-libcroco3_0.6.12-3_armhf.deb ... Unpacking libcroco3:armhf (0.6.12-3) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../32-libncurses6_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../33-gettext_0.19.8.1-9_armhf.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../34-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../35-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../36-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package libssl1.1:armhf. Preparing to unpack .../37-libssl1.1_1.1.1d-0+deb10u3_armhf.deb ... Unpacking libssl1.1:armhf (1.1.1d-0+deb10u3) ... Selecting previously unselected package libssl-dev:armhf. Preparing to unpack .../38-libssl-dev_1.1.1d-0+deb10u3_armhf.deb ... Unpacking libssl-dev:armhf (1.1.1d-0+deb10u3) ... Setting up libpipeline1:armhf (1.5.1-2) ... Setting up libbison-dev:armhf (2:3.3.2.dfsg-1) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:armhf (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libssl1.1:armhf (1.1.1d-0+deb10u3) ... Setting up libmagic1:armhf (1:5.35-4+deb10u1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up autoconf-archive (20180313-1) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libicu63:armhf (63.1-6+deb10u1) ... Setting up autotools-dev (20180224.1) ... Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:armhf (2.12-2) ... Setting up libssl-dev:armhf (1.1.1d-0+deb10u3) ... Setting up autopoint (0.19.8.1-9) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:armhf (0.0.6-3) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up libelf1:armhf (0.176-1.1) ... Setting up libxml2:armhf (2.9.4+dfsg1-7+b3) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libtool (2.4.6-9) ... Setting up m4 (1.4.18-2) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:armhf (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up bison (2:3.3.2.dfsg-1) ... update-alternatives: using /usr/bin/bison.yacc to provide /usr/bin/yacc (yacc) in auto mode Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up flex (2.6.4-6.2) ... Setting up gettext (0.19.8.1-9) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up po-debconf (1.0.21) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/bip-0.9.0~rc3/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package bip dpkg-buildpackage: info: source version 0.9.0~rc3-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Marc Dequènes (Duck) dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean echo dh clean dh clean dh clean dh_clean debian/rules build echo dh build dh build dh build dh_update_autotools_config debian/rules override_dh_autoreconf make[1]: Entering directory '/build/bip-0.9.0~rc3' dh_autoreconf --as-needed make[1]: Leaving directory '/build/bip-0.9.0~rc3' debian/rules override_dh_auto_configure make[1]: Entering directory '/build/bip-0.9.0~rc3' dh_auto_configure -- --enable-oidentd ./configure --build=arm-linux-gnueabihf --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --libexecdir=\${prefix}/lib/arm-linux-gnueabihf --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --enable-oidentd checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether to enable maintainer-specific portions of Makefiles... no checking whether make supports nested variables... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... none checking for flex... flex checking lex output file root... lex.yy checking lex library... none needed checking whether yytext is a pointer... no checking for bison... bison -y checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for size_t... yes checking for working alloca.h... yes checking for alloca... yes checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for inttypes.h... (cached) yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking malloc.h usability... yes checking malloc.h presence... yes checking for malloc.h... yes checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking stddef.h usability... yes checking stddef.h presence... yes checking for stddef.h... yes checking for stdint.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking termios.h usability... yes checking termios.h presence... yes checking for termios.h... yes checking for unistd.h... (cached) yes checking for inline... inline checking for int16_t... yes checking for int32_t... yes checking for int8_t... yes checking for pid_t... yes checking for size_t... (cached) yes checking for ssize_t... yes checking for uint16_t... yes checking for uint32_t... yes checking for uint8_t... yes checking for __attribute__... yes checking vfork.h usability... no checking vfork.h presence... no checking for vfork.h... no checking for fork... yes checking for vfork... yes checking for working fork... yes checking for working vfork... (cached) yes checking for stdlib.h... (cached) yes checking for GNU libc compatible malloc... yes checking whether time.h and sys/time.h may both be included... yes checking for sys/time.h... (cached) yes checking for unistd.h... (cached) yes checking for alarm... yes checking for working mktime... yes checking for stdlib.h... (cached) yes checking for GNU libc compatible realloc... yes checking for clock_gettime... yes checking for ftruncate... yes checking for gethostname... yes checking for gettimeofday... yes checking for localtime_r... yes checking for memmove... yes checking for memset... yes checking for mkdir... yes checking for select... yes checking for socket... yes checking for strcasecmp... yes checking for strchr... yes checking for strcspn... yes checking for strdup... yes checking for strerror... yes checking for strrchr... yes checking for strstr... yes checking for CRYPTO_new_ex_data in -lcrypto... yes checking for SSL_read in -lssl... yes checking whether gcc accepts PIE flags... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/config.h config.status: executing depfiles commands OPENSSL: yes DEBUG: no OIDENTD: yes PIE: yes make[1]: Leaving directory '/build/bip-0.9.0~rc3' dh_auto_build make -j3 make[1]: Entering directory '/build/bip-0.9.0~rc3' test -f src/conf.c || /bin/bash ./ylwrap src/conf.y y.tab.c src/conf.c y.tab.h `echo src/conf.c | sed -e s/cc$/hh/ -e s/cpp$/hpp/ -e s/cxx$/hxx/ -e s/c++$/h++/ -e s/c$/h/` y.output src/conf.output -- bison -y -d test -f src/lex.c || /bin/bash ./ylwrap src/lex.l lex.yy.c src/lex.c -- flex updating src/conf.h make all-am make[2]: Entering directory '/build/bip-0.9.0~rc3' gcc -DHAVE_CONFIG_H -I. -I./src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Werror -Wno-error -g -O2 -ffile-prefix-map=/build/bip-0.9.0~rc3=. -fstack-protector-strong -Wformat -Werror=format-security -fPIE -c -o src/conf.o src/conf.c gcc -DHAVE_CONFIG_H -I. -I./src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Werror -Wno-error -g -O2 -ffile-prefix-map=/build/bip-0.9.0~rc3=. -fstack-protector-strong -Wformat -Werror=format-security -fPIE -c -o src/lex.o src/lex.c gcc -DHAVE_CONFIG_H -I. -I./src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Werror -Wno-error -g -O2 -ffile-prefix-map=/build/bip-0.9.0~rc3=. -fstack-protector-strong -Wformat -Werror=format-security -fPIE -c -o src/bip.o src/bip.c src/bip.c: In function 'main': src/bip.c:1351:2: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] write(fd, buf, strlen(buf)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ src/bip.c: In function 'do_pid_stuff': src/bip.c:209:27: warning: '%s' directive output may be truncated writing up to 1023 bytes into a region of size 1022 [-Wformat-truncation=] snprintf(longpath, 1023, "%s.%s.%ld", conf_pid_file, hname, ^~~~~~~~~~~ ~~~~~ src/bip.c:209:27: note: using the range [-2147483648, 2147483647] for directive argument In file included from /usr/include/stdio.h:873, from src/bip.c:16: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output 4 or more bytes (assuming 1027) into a destination of size 1023 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -DHAVE_CONFIG_H -I. -I./src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Werror -Wno-error -g -O2 -ffile-prefix-map=/build/bip-0.9.0~rc3=. -fstack-protector-strong -Wformat -Werror=format-security -fPIE -c -o src/connection.o src/connection.c gcc -DHAVE_CONFIG_H -I. -I./src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Werror -Wno-error -g -O2 -ffile-prefix-map=/build/bip-0.9.0~rc3=. -fstack-protector-strong -Wformat -Werror=format-security -fPIE -c -o src/irc.o src/irc.c gcc -DHAVE_CONFIG_H -I. -I./src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Werror -Wno-error -g -O2 -ffile-prefix-map=/build/bip-0.9.0~rc3=. -fstack-protector-strong -Wformat -Werror=format-security -fPIE -c -o src/line.o src/line.c gcc -DHAVE_CONFIG_H -I. -I./src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Werror -Wno-error -g -O2 -ffile-prefix-map=/build/bip-0.9.0~rc3=. -fstack-protector-strong -Wformat -Werror=format-security -fPIE -c -o src/log.o src/log.c gcc -DHAVE_CONFIG_H -I. -I./src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Werror -Wno-error -g -O2 -ffile-prefix-map=/build/bip-0.9.0~rc3=. -fstack-protector-strong -Wformat -Werror=format-security -fPIE -c -o src/md5.o src/md5.c src/log.c: In function 'log_build_filename': src/log.c:148:21: warning: '%04d' directive output may be truncated writing between 4 and 11 bytes into a region of size 5 [-Wformat-truncation=] snprintf(year, 5, "%04d", now->tm_year + 1900); ^~~~ src/log.c:148:20: note: directive argument in the range [-2147481748, 2147483647] snprintf(year, 5, "%04d", now->tm_year + 1900); ^~~~~~ In file included from /usr/include/stdio.h:873, from src/log.h:17, from src/log.c:17: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 5 and 12 bytes into a destination of size 5 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/log.c:150:22: warning: '%02d' directive output may be truncated writing between 2 and 11 bytes into a region of size 3 [-Wformat-truncation=] snprintf(month, 3, "%02d", now->tm_mon + 1); ^~~~ src/log.c:150:21: note: directive argument in the range [-2147483647, 2147483647] snprintf(month, 3, "%02d", now->tm_mon + 1); ^~~~~~ In file included from /usr/include/stdio.h:873, from src/log.h:17, from src/log.c:17: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 3 and 12 bytes into a destination of size 3 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -DHAVE_CONFIG_H -I. -I./src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Werror -Wno-error -g -O2 -ffile-prefix-map=/build/bip-0.9.0~rc3=. -fstack-protector-strong -Wformat -Werror=format-security -fPIE -c -o src/path_util.o src/path_util.c gcc -DHAVE_CONFIG_H -I. -I./src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Werror -Wno-error -g -O2 -ffile-prefix-map=/build/bip-0.9.0~rc3=. -fstack-protector-strong -Wformat -Werror=format-security -fPIE -c -o src/util.o src/util.c gcc -DHAVE_CONFIG_H -I. -I./src -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -Wextra -Werror -Wno-error -g -O2 -ffile-prefix-map=/build/bip-0.9.0~rc3=. -fstack-protector-strong -Wformat -Werror=format-security -fPIE -c -o src/bipmkpw.o src/bipmkpw.c src/bipmkpw.c: In function 'readpass': src/bipmkpw.c:51:2: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] write(ttyfd, "Password: ", 10); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/bipmkpw.c:56:3: warning: ignoring return value of 'read', declared with attribute warn_unused_result [-Wunused-result] read(ttyfd, buffer+idx, 1); ^~~~~~~~~~~~~~~~~~~~~~~~~~ src/bipmkpw.c:66:2: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] write(ttyfd, "\n", 1); ^~~~~~~~~~~~~~~~~~~~~ src/util.c: In function 'timestamp': src/util.c:125:30: warning: '%04d' directive output may be truncated writing between 4 and 11 bytes into a region of size between 0 and 14 [-Wformat-truncation=] snprintf(ts, 20, "%02d-%02d-%04d %02d:%02d:%02d", tm->tm_mday, ^~~~ src/util.c:125:19: note: directive argument in the range [-2147481748, 2147483647] snprintf(ts, 20, "%02d-%02d-%04d %02d:%02d:%02d", tm->tm_mday, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/stdio.h:873, from src/connection.h:24, from src/util.c:15: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 20 and 72 bytes into a destination of size 20 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/util.c: In function 'hrtime': src/util.c:140:30: warning: '%04d' directive output may be truncated writing between 4 and 11 bytes into a region of size between 0 and 14 [-Wformat-truncation=] snprintf(ts, 20, "%02d-%02d-%04d %02d:%02d:%02d", tm->tm_mday, ^~~~ src/util.c:140:19: note: directive argument in the range [-2147481748, 2147483647] snprintf(ts, 20, "%02d-%02d-%04d %02d:%02d:%02d", tm->tm_mday, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/stdio.h:873, from src/connection.h:24, from src/util.c:15: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 20 and 72 bytes into a destination of size 20 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -Wall -Wextra -Werror -Wno-error -g -O2 -ffile-prefix-map=/build/bip-0.9.0~rc3=. -fstack-protector-strong -Wformat -Werror=format-security -fPIE -Wl,-z,relro -Wl,-z,now -pie -o src/bip src/conf.o src/lex.o src/bip.o src/connection.o src/irc.o src/line.o src/log.o src/md5.o src/path_util.o src/util.o -lssl -lcrypto gcc -Wall -Wextra -Werror -Wno-error -g -O2 -ffile-prefix-map=/build/bip-0.9.0~rc3=. -fstack-protector-strong -Wformat -Werror=format-security -fPIE -Wl,-z,relro -Wl,-z,now -pie -o src/bipmkpw src/bipmkpw.o src/md5.o src/util.o -lssl -lcrypto make[2]: Leaving directory '/build/bip-0.9.0~rc3' make[1]: Leaving directory '/build/bip-0.9.0~rc3' dh_auto_test make -j3 check VERBOSE=1 make[1]: Entering directory '/build/bip-0.9.0~rc3' make check-am make[2]: Entering directory '/build/bip-0.9.0~rc3' make[2]: Nothing to be done for 'check-am'. make[2]: Leaving directory '/build/bip-0.9.0~rc3' make[1]: Leaving directory '/build/bip-0.9.0~rc3' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary echo dh binary dh binary dh binary dh_testroot dh_prep dh_installdirs dh_auto_install make -j3 install DESTDIR=/build/bip-0.9.0\~rc3/debian/bip AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/bip-0.9.0~rc3' make install-am make[2]: Entering directory '/build/bip-0.9.0~rc3' make[3]: Entering directory '/build/bip-0.9.0~rc3' /bin/mkdir -p '/build/bip-0.9.0~rc3/debian/bip/usr/bin' /bin/mkdir -p '/build/bip-0.9.0~rc3/debian/bip/usr/share/doc/bip/examples/' /usr/bin/install -c -m 644 samples/bip.conf samples/bip.vim '/build/bip-0.9.0~rc3/debian/bip/usr/share/doc/bip/examples/' /usr/bin/install -c src/bip src/bipmkpw '/build/bip-0.9.0~rc3/debian/bip/usr/bin' /bin/mkdir -p '/build/bip-0.9.0~rc3/debian/bip/usr/share/man/man1' /bin/mkdir -p '/build/bip-0.9.0~rc3/debian/bip/usr/share/man/man5' /usr/bin/install -c -m 644 bip.1 bipmkpw.1 '/build/bip-0.9.0~rc3/debian/bip/usr/share/man/man1' /usr/bin/install -c -m 644 bip.conf.5 '/build/bip-0.9.0~rc3/debian/bip/usr/share/man/man5' make[3]: Leaving directory '/build/bip-0.9.0~rc3' make[2]: Leaving directory '/build/bip-0.9.0~rc3' make[1]: Leaving directory '/build/bip-0.9.0~rc3' dh_install dh_installdocs dh_installchangelogs dh_installman debian/rules override_dh_installinit make[1]: Entering directory '/build/bip-0.9.0~rc3' dh_installinit --no-start --no-stop-on-upgrade make[1]: Leaving directory '/build/bip-0.9.0~rc3' dh_installsystemd dh_lintian dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing debian/rules override_dh_strip make[1]: Entering directory '/build/bip-0.9.0~rc3' dh_strip --dbgsym-migration='bip-dbg (<< 0.9.0~rc2-1~)' make[1]: Leaving directory '/build/bip-0.9.0~rc3' dh_makeshlibs dh_shlibdeps dh_installdeb dh_gencontrol dpkg-gencontrol: warning: package bip: substitution variable ${perl:Depends} unused, but is defined dpkg-gencontrol: warning: package bip: substitution variable ${perl:Depends} unused, but is defined dh_md5sums dh_builddeb dpkg-deb: building package 'bip-dbgsym' in '../bip-dbgsym_0.9.0~rc3-1_armhf.deb'. dpkg-deb: building package 'bip' in '../bip_0.9.0~rc3-1_armhf.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../bip_0.9.0~rc3-1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3833 and its subdirectories I: Current time: Thu May 28 04:01:14 -12 2020 I: pbuilder-time-stamp: 1590681674