I: pbuilder: network access will be disabled during build I: Current time: Wed May 20 21:34:55 -12 2020 I: pbuilder-time-stamp: 1590053695 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libarchive-extract-perl_0.80-1.dsc] I: copying [./libarchive-extract-perl_0.80.orig.tar.gz] I: copying [./libarchive-extract-perl_0.80-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Sat Jan 21 05:09:20 2017 -12 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libarchive-extract-perl_0.80-1.dsc dpkg-source: info: extracting libarchive-extract-perl in libarchive-extract-perl-0.80 dpkg-source: info: unpacking libarchive-extract-perl_0.80.orig.tar.gz dpkg-source: info: unpacking libarchive-extract-perl_0.80-1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 9), perl, libmodule-load-conditional-perl (>= 0.66) | perl (>= 5.25.4) dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 9); however: Package debhelper is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbsd0{a} libcroco3{a} libelf1{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libncurses6{a} libpipeline1{a} libsigsegv2{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libglib2.0-data libgpm2 libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 33 newly installed, 0 to remove and 0 not upgraded. Need to get 18.2 MB of archives. After unpacking 63.5 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main armhf libbsd0 armhf 0.9.1-2 [103 kB] Get: 2 http://deb.debian.org/debian buster/main armhf bsdmainutils armhf 11.1.2+b1 [186 kB] Get: 3 http://deb.debian.org/debian buster/main armhf libuchardet0 armhf 0.0.6-3 [62.2 kB] Get: 4 http://deb.debian.org/debian buster/main armhf groff-base armhf 1.22.4-3 [828 kB] Get: 5 http://deb.debian.org/debian buster/main armhf libpipeline1 armhf 1.5.1-2 [26.8 kB] Get: 6 http://deb.debian.org/debian buster/main armhf man-db armhf 2.8.5-2 [1240 kB] Get: 7 http://deb.debian.org/debian buster/main armhf sensible-utils all 0.0.12 [15.8 kB] Get: 8 http://deb.debian.org/debian buster/main armhf libmagic-mgc armhf 1:5.35-4+deb10u1 [242 kB] Get: 9 http://deb.debian.org/debian buster/main armhf libmagic1 armhf 1:5.35-4+deb10u1 [110 kB] Get: 10 http://deb.debian.org/debian buster/main armhf file armhf 1:5.35-4+deb10u1 [65.5 kB] Get: 11 http://deb.debian.org/debian buster/main armhf gettext-base armhf 0.19.8.1-9 [118 kB] Get: 12 http://deb.debian.org/debian buster/main armhf libsigsegv2 armhf 2.12-2 [32.1 kB] Get: 13 http://deb.debian.org/debian buster/main armhf m4 armhf 1.4.18-2 [190 kB] Get: 14 http://deb.debian.org/debian buster/main armhf autoconf all 2.69-11 [341 kB] Get: 15 http://deb.debian.org/debian buster/main armhf autotools-dev all 20180224.1 [77.0 kB] Get: 16 http://deb.debian.org/debian buster/main armhf automake all 1:1.16.1-4 [771 kB] Get: 17 http://deb.debian.org/debian buster/main armhf autopoint all 0.19.8.1-9 [434 kB] Get: 18 http://deb.debian.org/debian buster/main armhf libtool all 2.4.6-9 [547 kB] Get: 19 http://deb.debian.org/debian buster/main armhf dh-autoreconf all 19 [16.9 kB] Get: 20 http://deb.debian.org/debian buster/main armhf libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 21 http://deb.debian.org/debian buster/main armhf libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 22 http://deb.debian.org/debian buster/main armhf dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 23 http://deb.debian.org/debian buster/main armhf libelf1 armhf 0.176-1.1 [158 kB] Get: 24 http://deb.debian.org/debian buster/main armhf dwz armhf 0.12-3 [72.0 kB] Get: 25 http://deb.debian.org/debian buster/main armhf libglib2.0-0 armhf 2.58.3-2+deb10u2 [1101 kB] Get: 26 http://deb.debian.org/debian buster/main armhf libicu63 armhf 63.1-6+deb10u1 [8005 kB] Get: 27 http://deb.debian.org/debian buster/main armhf libxml2 armhf 2.9.4+dfsg1-7+b3 [595 kB] Get: 28 http://deb.debian.org/debian buster/main armhf libcroco3 armhf 0.6.12-3 [133 kB] Get: 29 http://deb.debian.org/debian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [79.8 kB] Get: 30 http://deb.debian.org/debian buster/main armhf gettext armhf 0.19.8.1-9 [1242 kB] Get: 31 http://deb.debian.org/debian buster/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 32 http://deb.debian.org/debian buster/main armhf po-debconf all 1.0.21 [248 kB] Get: 33 http://deb.debian.org/debian buster/main armhf debhelper all 12.1.1 [1016 kB] Fetched 18.2 MB in 2s (8139 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_armhf.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../02-libuchardet0_0.0.6-3_armhf.deb ... Unpacking libuchardet0:armhf (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_armhf.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../04-libpipeline1_1.5.1-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_armhf.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../06-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../07-libmagic-mgc_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../08-libmagic1_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic1:armhf (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../09-file_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../10-gettext-base_0.19.8.1-9_armhf.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../11-libsigsegv2_2.12-2_armhf.deb ... Unpacking libsigsegv2:armhf (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-2_armhf.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../22-libelf1_0.176-1.1_armhf.deb ... Unpacking libelf1:armhf (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.12-3_armhf.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../24-libglib2.0-0_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:armhf. Preparing to unpack .../25-libicu63_63.1-6+deb10u1_armhf.deb ... Unpacking libicu63:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../26-libxml2_2.9.4+dfsg1-7+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../27-libcroco3_0.6.12-3_armhf.deb ... Unpacking libcroco3:armhf (0.6.12-3) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../28-libncurses6_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.19.8.1-9_armhf.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Setting up libpipeline1:armhf (1.5.1-2) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:armhf (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libmagic1:armhf (1:5.35-4+deb10u1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libicu63:armhf (63.1-6+deb10u1) ... Setting up autotools-dev (20180224.1) ... Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:armhf (2.12-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:armhf (0.0.6-3) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up libelf1:armhf (0.176-1.1) ... Setting up libxml2:armhf (2.9.4+dfsg1-7+b3) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libtool (2.4.6-9) ... Setting up m4 (1.4.18-2) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:armhf (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up gettext (0.19.8.1-9) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up po-debconf (1.0.21) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/libarchive-extract-perl-0.80/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package libarchive-extract-perl dpkg-buildpackage: info: source version 0.80-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_auto_configure perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -ffile-prefix-map=/build/libarchive-extract-perl-0.80=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=arm-linux-gnueabihf-gcc -g -O2 -ffile-prefix-map=/build/libarchive-extract-perl-0.80=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Archive::Extract Writing MYMETA.yml and MYMETA.json dh_auto_build make -j1 make[1]: Entering directory '/build/libarchive-extract-perl-0.80' cp lib/Archive/Extract.pm blib/lib/Archive/Extract.pm Manifying 1 pod document make[1]: Leaving directory '/build/libarchive-extract-perl-0.80' dh_auto_test make -j1 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libarchive-extract-perl-0.80' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/01_Archive-Extract.t .. ok 1 - use Archive::Extract; ok 2 - Archive::Extract->can('types') ok 3 - Got a list of types ok 4 - Object created based on 'tgz' ok 5 - No error logged ok 6 - Object created based on 'tar' ok 7 - No error logged ok 8 - Object created based on 'gz' ok 9 - No error logged ok 10 - Object created based on 'zip' ok 11 - No error logged ok 12 - Object created based on 'bz2' ok 13 - No error logged ok 14 - Object created based on 'tbz' ok 15 - No error logged ok 16 - Object created based on 'Z' ok 17 - No error logged ok 18 - Object created based on 'lzma' ok 19 - No error logged ok 20 - Object created based on 'xz' ok 21 - No error logged ok 22 - Object created based on 'txz' ok 23 - No error logged ok 24 - No archive created based on '01_Archive-Extract.t' ok 25 - Error not captured in class method ok 26 - Error captured as warning ok 27 - Error is: unknown file type ok 28 - Archive created ok 29 - No errors yet ok 30 - Errors retrieved ok 31 - As expected ok 32 - Errors erased after ->extract() call ok 33 - Found extraction dir '/build/libarchive-extract-perl-0.80/t/src' ok 34 - Is expected dir '/build/libarchive-extract-perl-0.80/t/src' ok 35 - Found extraction dir '/build/libarchive-extract-perl-0.80/t/src' ok 36 - Is expected dir '/build/libarchive-extract-perl-0.80/t/src' ok 37 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 38 - Archive type is_Z recognized properly ok 39 - extract() for 'x.Z' reports success (PP: 0 Bin: 1) ok 40 - No errors capturing buffers ok 41 - Found correct number of output files (a) ok 42 - Found correct output file 'a' ok 43 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 44 - Extract dir found ok 45 - Extract dir exists ok 46 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 47 - Output file successfully removed ok 48 - rmtree gave no error ok 49 - Extract dir successfully removed ok 50 # skip No buffers available ok 51 # skip No buffers available ok 52 # skip No buffers available ok 53 # skip No buffers available ok 54 # skip No buffers available ok 55 # skip No buffers available ok 56 # skip No buffers available ok 57 # skip No buffers available ok 58 - Output file successfully removed ok 59 - rmtree gave no error ok 60 - Extract dir successfully removed ok 61 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 62 - Archive type is_txz recognized properly ok 63 - extract() for 'x.tar.xz' reports success (PP: 0 Bin: 1) ok 64 - No errors capturing buffers ok 65 - Found correct number of output files (a) ok 66 - Found correct output file 'a' ok 67 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 68 - Extract dir found ok 69 - Extract dir exists ok 70 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 71 - Output file successfully removed ok 72 - rmtree gave no error ok 73 - Extract dir successfully removed ok 74 # skip No buffers available ok 75 # skip No buffers available ok 76 # skip No buffers available ok 77 # skip No buffers available ok 78 # skip No buffers available ok 79 # skip No buffers available ok 80 # skip No buffers available ok 81 # skip No buffers available ok 82 - Output file successfully removed ok 83 # skip No extract path captured, can't remove paths ok 84 # skip No extract path captured, can't remove paths ok 85 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 86 - Archive type is_txz recognized properly ok 87 - extract() for 'x.tar.xz' reports success (PP: 0 Bin: 1) ok 88 - No errors capturing buffers ok 89 - Found correct number of output files (a) ok 90 - Found correct output file 'a' ok 91 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 92 - Extract dir found ok 93 - Extract dir exists ok 94 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 95 - Output file successfully removed ok 96 - rmtree gave no error ok 97 - Extract dir successfully removed ok 98 # skip No buffers available ok 99 # skip No buffers available ok 100 # skip No buffers available ok 101 # skip No buffers available ok 102 # skip No buffers available ok 103 # skip No buffers available ok 104 # skip No buffers available ok 105 # skip No buffers available ok 106 - Output file successfully removed ok 107 # skip No extract path captured, can't remove paths ok 108 # skip No extract path captured, can't remove paths ok 109 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 110 - Archive type is_zip recognized properly ok 111 # skip No binaries or modules to extract x.war ok 112 # skip No binaries or modules to extract x.war ok 113 # skip No binaries or modules to extract x.war ok 114 # skip No binaries or modules to extract x.war ok 115 # skip No binaries or modules to extract x.war ok 116 # skip No binaries or modules to extract x.war ok 117 # skip No binaries or modules to extract x.war ok 118 # skip No binaries or modules to extract x.war ok 119 # skip No binaries or modules to extract x.war ok 120 # skip No binaries or modules to extract x.war ok 121 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 122 - Archive type is_gz recognized properly ok 123 - extract() for 'x.gz' reports success (PP: 0 Bin: 1) ok 124 - No errors capturing buffers ok 125 - Found correct number of output files (a) ok 126 - Found correct output file 'a' ok 127 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 128 - Extract dir found ok 129 - Extract dir exists ok 130 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 131 - Output file successfully removed ok 132 - rmtree gave no error ok 133 - Extract dir successfully removed ok 134 # skip No buffers available ok 135 # skip No buffers available ok 136 # skip No buffers available ok 137 # skip No buffers available ok 138 # skip No buffers available ok 139 # skip No buffers available ok 140 # skip No buffers available ok 141 # skip No buffers available ok 142 - Output file successfully removed ok 143 - rmtree gave no error ok 144 - Extract dir successfully removed ok 145 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 146 - Archive type is_txz recognized properly ok 147 - extract() for 'y.tar.xz' reports success (PP: 0 Bin: 1) ok 148 - No errors capturing buffers ok 149 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 150 - Found correct output file 'y/z' ok 151 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 152 - Extract dir found ok 153 - Extract dir exists ok 154 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 155 - Output file successfully removed ok 156 - rmtree gave no error ok 157 - Extract dir successfully removed ok 158 # skip No buffers available ok 159 # skip No buffers available ok 160 # skip No buffers available ok 161 # skip No buffers available ok 162 # skip No buffers available ok 163 # skip No buffers available ok 164 # skip No buffers available ok 165 # skip No buffers available ok 166 - Output file successfully removed ok 167 # skip No extract path captured, can't remove paths ok 168 # skip No extract path captured, can't remove paths ok 169 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 170 - Archive type is_txz recognized properly ok 171 - extract() for 'y.tar.xz' reports success (PP: 0 Bin: 1) ok 172 - No errors capturing buffers ok 173 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 174 - Found correct output file 'y/z' ok 175 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 176 - Extract dir found ok 177 - Extract dir exists ok 178 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 179 - Output file successfully removed ok 180 - rmtree gave no error ok 181 - Extract dir successfully removed ok 182 # skip No buffers available ok 183 # skip No buffers available ok 184 # skip No buffers available ok 185 # skip No buffers available ok 186 # skip No buffers available ok 187 # skip No buffers available ok 188 # skip No buffers available ok 189 # skip No buffers available ok 190 - Output file successfully removed ok 191 # skip No extract path captured, can't remove paths ok 192 # skip No extract path captured, can't remove paths ok 193 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 194 - Archive type is_bz2 recognized properly ok 195 - extract() for 'x.bz2' reports success (PP: 0 Bin: 1) ok 196 - No errors capturing buffers ok 197 - Found correct number of output files (a) ok 198 - Found correct output file 'a' ok 199 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 200 - Extract dir found ok 201 - Extract dir exists ok 202 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 203 - Output file successfully removed ok 204 - rmtree gave no error ok 205 - Extract dir successfully removed ok 206 # skip No buffers available ok 207 # skip No buffers available ok 208 # skip No buffers available ok 209 # skip No buffers available ok 210 # skip No buffers available ok 211 # skip No buffers available ok 212 # skip No buffers available ok 213 # skip No buffers available ok 214 - Output file successfully removed ok 215 - rmtree gave no error ok 216 - Extract dir successfully removed ok 217 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 218 - Archive type is_zip recognized properly ok 219 # skip No binaries or modules to extract y.war ok 220 # skip No binaries or modules to extract y.war ok 221 # skip No binaries or modules to extract y.war ok 222 # skip No binaries or modules to extract y.war ok 223 # skip No binaries or modules to extract y.war ok 224 # skip No binaries or modules to extract y.war ok 225 # skip No binaries or modules to extract y.war ok 226 # skip No binaries or modules to extract y.war ok 227 # skip No binaries or modules to extract y.war ok 228 # skip No binaries or modules to extract y.war ok 229 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 230 - Archive type is_tar recognized properly ok 231 - extract() for 'y.tar' reports success (PP: 0 Bin: 1) ok 232 - No errors capturing buffers ok 233 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 234 - Found correct output file 'y/z' ok 235 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 236 - Extract dir found ok 237 - Extract dir exists ok 238 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 239 - Output file successfully removed ok 240 - rmtree gave no error ok 241 - Extract dir successfully removed ok 242 # skip No buffers available ok 243 # skip No buffers available ok 244 # skip No buffers available ok 245 # skip No buffers available ok 246 # skip No buffers available ok 247 # skip No buffers available ok 248 # skip No buffers available ok 249 # skip No buffers available ok 250 - Output file successfully removed ok 251 # skip No extract path captured, can't remove paths ok 252 # skip No extract path captured, can't remove paths ok 253 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 254 - Archive type is_tar recognized properly ok 255 - extract() for 'y.tar' reports success (PP: 0 Bin: 1) ok 256 - No errors capturing buffers ok 257 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 258 - Found correct output file 'y/z' ok 259 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 260 - Extract dir found ok 261 - Extract dir exists ok 262 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 263 - Output file successfully removed ok 264 - rmtree gave no error ok 265 - Extract dir successfully removed ok 266 # skip No buffers available ok 267 # skip No buffers available ok 268 # skip No buffers available ok 269 # skip No buffers available ok 270 # skip No buffers available ok 271 # skip No buffers available ok 272 # skip No buffers available ok 273 # skip No buffers available ok 274 - Output file successfully removed ok 275 # skip No extract path captured, can't remove paths ok 276 # skip No extract path captured, can't remove paths ok 277 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 278 - Archive type is_zip recognized properly ok 279 # skip No binaries or modules to extract x.par ok 280 # skip No binaries or modules to extract x.par ok 281 # skip No binaries or modules to extract x.par ok 282 # skip No binaries or modules to extract x.par ok 283 # skip No binaries or modules to extract x.par ok 284 # skip No binaries or modules to extract x.par ok 285 # skip No binaries or modules to extract x.par ok 286 # skip No binaries or modules to extract x.par ok 287 # skip No binaries or modules to extract x.par ok 288 # skip No binaries or modules to extract x.par ok 289 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 290 - Archive type is_tbz recognized properly ok 291 - extract() for 'y.tbz' reports success (PP: 0 Bin: 1) ok 292 - No errors capturing buffers ok 293 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 294 - Found correct output file 'y/z' ok 295 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 296 - Extract dir found ok 297 - Extract dir exists ok 298 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 299 - Output file successfully removed ok 300 - rmtree gave no error ok 301 - Extract dir successfully removed ok 302 # skip No buffers available ok 303 # skip No buffers available ok 304 # skip No buffers available ok 305 # skip No buffers available ok 306 # skip No buffers available ok 307 # skip No buffers available ok 308 # skip No buffers available ok 309 # skip No buffers available ok 310 - Output file successfully removed ok 311 # skip No extract path captured, can't remove paths ok 312 # skip No extract path captured, can't remove paths ok 313 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 314 - Archive type is_tbz recognized properly ok 315 - extract() for 'y.tbz' reports success (PP: 0 Bin: 1) ok 316 - No errors capturing buffers ok 317 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 318 - Found correct output file 'y/z' ok 319 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 320 - Extract dir found ok 321 - Extract dir exists ok 322 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 323 - Output file successfully removed ok 324 - rmtree gave no error ok 325 - Extract dir successfully removed ok 326 # skip No buffers available ok 327 # skip No buffers available ok 328 # skip No buffers available ok 329 # skip No buffers available ok 330 # skip No buffers available ok 331 # skip No buffers available ok 332 # skip No buffers available ok 333 # skip No buffers available ok 334 - Output file successfully removed ok 335 # skip No extract path captured, can't remove paths ok 336 # skip No extract path captured, can't remove paths ok 337 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 338 - Archive type is_txz recognized properly ok 339 - extract() for 'x.txz' reports success (PP: 0 Bin: 1) ok 340 - No errors capturing buffers ok 341 - Found correct number of output files (a) ok 342 - Found correct output file 'a' ok 343 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 344 - Extract dir found ok 345 - Extract dir exists ok 346 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 347 - Output file successfully removed ok 348 - rmtree gave no error ok 349 - Extract dir successfully removed ok 350 # skip No buffers available ok 351 # skip No buffers available ok 352 # skip No buffers available ok 353 # skip No buffers available ok 354 # skip No buffers available ok 355 # skip No buffers available ok 356 # skip No buffers available ok 357 # skip No buffers available ok 358 - Output file successfully removed ok 359 # skip No extract path captured, can't remove paths ok 360 # skip No extract path captured, can't remove paths ok 361 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 362 - Archive type is_txz recognized properly ok 363 - extract() for 'x.txz' reports success (PP: 0 Bin: 1) ok 364 - No errors capturing buffers ok 365 - Found correct number of output files (a) ok 366 - Found correct output file 'a' ok 367 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 368 - Extract dir found ok 369 - Extract dir exists ok 370 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 371 - Output file successfully removed ok 372 - rmtree gave no error ok 373 - Extract dir successfully removed ok 374 # skip No buffers available ok 375 # skip No buffers available ok 376 # skip No buffers available ok 377 # skip No buffers available ok 378 # skip No buffers available ok 379 # skip No buffers available ok 380 # skip No buffers available ok 381 # skip No buffers available ok 382 - Output file successfully removed ok 383 # skip No extract path captured, can't remove paths ok 384 # skip No extract path captured, can't remove paths ok 385 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 386 - Archive type is_tgz recognized properly ok 387 - extract() for 'y.tgz' reports success (PP: 0 Bin: 1) ok 388 - No errors capturing buffers ok 389 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 390 - Found correct output file 'y/z' ok 391 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 392 - Extract dir found ok 393 - Extract dir exists ok 394 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 395 - Output file successfully removed ok 396 - rmtree gave no error ok 397 - Extract dir successfully removed ok 398 # skip No buffers available ok 399 # skip No buffers available ok 400 # skip No buffers available ok 401 # skip No buffers available ok 402 # skip No buffers available ok 403 # skip No buffers available ok 404 # skip No buffers available ok 405 # skip No buffers available ok 406 - Output file successfully removed ok 407 # skip No extract path captured, can't remove paths ok 408 # skip No extract path captured, can't remove paths ok 409 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 410 - Archive type is_tgz recognized properly ok 411 - extract() for 'y.tgz' reports success (PP: 0 Bin: 1) ok 412 - No errors capturing buffers ok 413 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 414 - Found correct output file 'y/z' ok 415 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 416 - Extract dir found ok 417 - Extract dir exists ok 418 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 419 - Output file successfully removed ok 420 - rmtree gave no error ok 421 - Extract dir successfully removed ok 422 # skip No buffers available ok 423 # skip No buffers available ok 424 # skip No buffers available ok 425 # skip No buffers available ok 426 # skip No buffers available ok 427 # skip No buffers available ok 428 # skip No buffers available ok 429 # skip No buffers available ok 430 - Output file successfully removed ok 431 # skip No extract path captured, can't remove paths ok 432 # skip No extract path captured, can't remove paths ok 433 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 434 - Archive type is_zip recognized properly ok 435 # skip No binaries or modules to extract x.zip ok 436 # skip No binaries or modules to extract x.zip ok 437 # skip No binaries or modules to extract x.zip ok 438 # skip No binaries or modules to extract x.zip ok 439 # skip No binaries or modules to extract x.zip ok 440 # skip No binaries or modules to extract x.zip ok 441 # skip No binaries or modules to extract x.zip ok 442 # skip No binaries or modules to extract x.zip ok 443 # skip No binaries or modules to extract x.zip ok 444 # skip No binaries or modules to extract x.zip ok 445 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 446 - Archive type is_xz recognized properly ok 447 - extract() for 'x.xz' reports success (PP: 0 Bin: 1) ok 448 - No errors capturing buffers ok 449 - Found correct number of output files (a) ok 450 - Found correct output file 'a' ok 451 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 452 - Extract dir found ok 453 - Extract dir exists ok 454 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 455 - Output file successfully removed ok 456 - rmtree gave no error ok 457 - Extract dir successfully removed ok 458 # skip No buffers available ok 459 # skip No buffers available ok 460 # skip No buffers available ok 461 # skip No buffers available ok 462 # skip No buffers available ok 463 # skip No buffers available ok 464 # skip No buffers available ok 465 # skip No buffers available ok 466 - Output file successfully removed ok 467 - rmtree gave no error ok 468 - Extract dir successfully removed ok 469 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 470 - Archive type is_zip recognized properly ok 471 # skip No binaries or modules to extract y.ear ok 472 # skip No binaries or modules to extract y.ear ok 473 # skip No binaries or modules to extract y.ear ok 474 # skip No binaries or modules to extract y.ear ok 475 # skip No binaries or modules to extract y.ear ok 476 # skip No binaries or modules to extract y.ear ok 477 # skip No binaries or modules to extract y.ear ok 478 # skip No binaries or modules to extract y.ear ok 479 # skip No binaries or modules to extract y.ear ok 480 # skip No binaries or modules to extract y.ear ok 481 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 482 - Archive type is_tgz recognized properly ok 483 - extract() for 'x.tar.gz' reports success (PP: 0 Bin: 1) ok 484 - No errors capturing buffers ok 485 - Found correct number of output files (a) ok 486 - Found correct output file 'a' ok 487 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 488 - Extract dir found ok 489 - Extract dir exists ok 490 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 491 - Output file successfully removed ok 492 - rmtree gave no error ok 493 - Extract dir successfully removed ok 494 # skip No buffers available ok 495 # skip No buffers available ok 496 # skip No buffers available ok 497 # skip No buffers available ok 498 # skip No buffers available ok 499 # skip No buffers available ok 500 # skip No buffers available ok 501 # skip No buffers available ok 502 - Output file successfully removed ok 503 # skip No extract path captured, can't remove paths ok 504 # skip No extract path captured, can't remove paths ok 505 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 506 - Archive type is_tgz recognized properly ok 507 - extract() for 'x.tar.gz' reports success (PP: 0 Bin: 1) ok 508 - No errors capturing buffers ok 509 - Found correct number of output files (a) ok 510 - Found correct output file 'a' ok 511 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 512 - Extract dir found ok 513 - Extract dir exists ok 514 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 515 - Output file successfully removed ok 516 - rmtree gave no error ok 517 - Extract dir successfully removed ok 518 # skip No buffers available ok 519 # skip No buffers available ok 520 # skip No buffers available ok 521 # skip No buffers available ok 522 # skip No buffers available ok 523 # skip No buffers available ok 524 # skip No buffers available ok 525 # skip No buffers available ok 526 - Output file successfully removed ok 527 # skip No extract path captured, can't remove paths ok 528 # skip No extract path captured, can't remove paths ok 529 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 530 - Archive type is_zip recognized properly ok 531 # skip No binaries or modules to extract y.jar ok 532 # skip No binaries or modules to extract y.jar ok 533 # skip No binaries or modules to extract y.jar ok 534 # skip No binaries or modules to extract y.jar ok 535 # skip No binaries or modules to extract y.jar ok 536 # skip No binaries or modules to extract y.jar ok 537 # skip No binaries or modules to extract y.jar ok 538 # skip No binaries or modules to extract y.jar ok 539 # skip No binaries or modules to extract y.jar ok 540 # skip No binaries or modules to extract y.jar ok 541 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 542 - Archive type is_lzma recognized properly ok 543 - extract() for 'x.lzma' reports success (PP: 0 Bin: 1) ok 544 - No errors capturing buffers ok 545 - Found correct number of output files (a) ok 546 - Found correct output file 'a' ok 547 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 548 - Extract dir found ok 549 - Extract dir exists ok 550 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 551 - Output file successfully removed ok 552 - rmtree gave no error ok 553 - Extract dir successfully removed ok 554 # skip No buffers available ok 555 # skip No buffers available ok 556 # skip No buffers available ok 557 # skip No buffers available ok 558 # skip No buffers available ok 559 # skip No buffers available ok 560 # skip No buffers available ok 561 # skip No buffers available ok 562 - Output file successfully removed ok 563 - rmtree gave no error ok 564 - Extract dir successfully removed ok 565 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 566 - Archive type is_tgz recognized properly ok 567 - extract() for 'x.tgz' reports success (PP: 0 Bin: 1) ok 568 - No errors capturing buffers ok 569 - Found correct number of output files (a) ok 570 - Found correct output file 'a' ok 571 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 572 - Extract dir found ok 573 - Extract dir exists ok 574 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 575 - Output file successfully removed ok 576 - rmtree gave no error ok 577 - Extract dir successfully removed ok 578 # skip No buffers available ok 579 # skip No buffers available ok 580 # skip No buffers available ok 581 # skip No buffers available ok 582 # skip No buffers available ok 583 # skip No buffers available ok 584 # skip No buffers available ok 585 # skip No buffers available ok 586 - Output file successfully removed ok 587 # skip No extract path captured, can't remove paths ok 588 # skip No extract path captured, can't remove paths ok 589 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 590 - Archive type is_tgz recognized properly ok 591 - extract() for 'x.tgz' reports success (PP: 0 Bin: 1) ok 592 - No errors capturing buffers ok 593 - Found correct number of output files (a) ok 594 - Found correct output file 'a' ok 595 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 596 - Extract dir found ok 597 - Extract dir exists ok 598 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 599 - Output file successfully removed ok 600 - rmtree gave no error ok 601 - Extract dir successfully removed ok 602 # skip No buffers available ok 603 # skip No buffers available ok 604 # skip No buffers available ok 605 # skip No buffers available ok 606 # skip No buffers available ok 607 # skip No buffers available ok 608 # skip No buffers available ok 609 # skip No buffers available ok 610 - Output file successfully removed ok 611 # skip No extract path captured, can't remove paths ok 612 # skip No extract path captured, can't remove paths ok 613 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 614 - Archive type is_zip recognized properly ok 615 # skip No binaries or modules to extract y.zip ok 616 # skip No binaries or modules to extract y.zip ok 617 # skip No binaries or modules to extract y.zip ok 618 # skip No binaries or modules to extract y.zip ok 619 # skip No binaries or modules to extract y.zip ok 620 # skip No binaries or modules to extract y.zip ok 621 # skip No binaries or modules to extract y.zip ok 622 # skip No binaries or modules to extract y.zip ok 623 # skip No binaries or modules to extract y.zip ok 624 # skip No binaries or modules to extract y.zip ok 625 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 626 - Archive type is_txz recognized properly ok 627 - extract() for 'y.txz' reports success (PP: 0 Bin: 1) ok 628 - No errors capturing buffers ok 629 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 630 - Found correct output file 'y/z' ok 631 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 632 - Extract dir found ok 633 - Extract dir exists ok 634 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 635 - Output file successfully removed ok 636 - rmtree gave no error ok 637 - Extract dir successfully removed ok 638 # skip No buffers available ok 639 # skip No buffers available ok 640 # skip No buffers available ok 641 # skip No buffers available ok 642 # skip No buffers available ok 643 # skip No buffers available ok 644 # skip No buffers available ok 645 # skip No buffers available ok 646 - Output file successfully removed ok 647 # skip No extract path captured, can't remove paths ok 648 # skip No extract path captured, can't remove paths ok 649 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 650 - Archive type is_txz recognized properly ok 651 - extract() for 'y.txz' reports success (PP: 0 Bin: 1) ok 652 - No errors capturing buffers ok 653 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 654 - Found correct output file 'y/z' ok 655 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 656 - Extract dir found ok 657 - Extract dir exists ok 658 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 659 - Output file successfully removed ok 660 - rmtree gave no error ok 661 - Extract dir successfully removed ok 662 # skip No buffers available ok 663 # skip No buffers available ok 664 # skip No buffers available ok 665 # skip No buffers available ok 666 # skip No buffers available ok 667 # skip No buffers available ok 668 # skip No buffers available ok 669 # skip No buffers available ok 670 - Output file successfully removed ok 671 # skip No extract path captured, can't remove paths ok 672 # skip No extract path captured, can't remove paths ok 673 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 674 - Archive type is_zip recognized properly ok 675 # skip No binaries or modules to extract y.par ok 676 # skip No binaries or modules to extract y.par ok 677 # skip No binaries or modules to extract y.par ok 678 # skip No binaries or modules to extract y.par ok 679 # skip No binaries or modules to extract y.par ok 680 # skip No binaries or modules to extract y.par ok 681 # skip No binaries or modules to extract y.par ok 682 # skip No binaries or modules to extract y.par ok 683 # skip No binaries or modules to extract y.par ok 684 # skip No binaries or modules to extract y.par ok 685 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 686 - Archive type is_tar recognized properly ok 687 - extract() for 'x.tar' reports success (PP: 0 Bin: 1) ok 688 - No errors capturing buffers ok 689 - Found correct number of output files (a) ok 690 - Found correct output file 'a' ok 691 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 692 - Extract dir found ok 693 - Extract dir exists ok 694 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 695 - Output file successfully removed ok 696 - rmtree gave no error ok 697 - Extract dir successfully removed ok 698 # skip No buffers available ok 699 # skip No buffers available ok 700 # skip No buffers available ok 701 # skip No buffers available ok 702 # skip No buffers available ok 703 # skip No buffers available ok 704 # skip No buffers available ok 705 # skip No buffers available ok 706 - Output file successfully removed ok 707 # skip No extract path captured, can't remove paths ok 708 # skip No extract path captured, can't remove paths ok 709 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 710 - Archive type is_tar recognized properly ok 711 - extract() for 'x.tar' reports success (PP: 0 Bin: 1) ok 712 - No errors capturing buffers ok 713 - Found correct number of output files (a) ok 714 - Found correct output file 'a' ok 715 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 716 - Extract dir found ok 717 - Extract dir exists ok 718 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 719 - Output file successfully removed ok 720 - rmtree gave no error ok 721 - Extract dir successfully removed ok 722 # skip No buffers available ok 723 # skip No buffers available ok 724 # skip No buffers available ok 725 # skip No buffers available ok 726 # skip No buffers available ok 727 # skip No buffers available ok 728 # skip No buffers available ok 729 # skip No buffers available ok 730 - Output file successfully removed ok 731 # skip No extract path captured, can't remove paths ok 732 # skip No extract path captured, can't remove paths ok 733 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 734 - Archive type is_zip recognized properly ok 735 # skip No binaries or modules to extract x.jar ok 736 # skip No binaries or modules to extract x.jar ok 737 # skip No binaries or modules to extract x.jar ok 738 # skip No binaries or modules to extract x.jar ok 739 # skip No binaries or modules to extract x.jar ok 740 # skip No binaries or modules to extract x.jar ok 741 # skip No binaries or modules to extract x.jar ok 742 # skip No binaries or modules to extract x.jar ok 743 # skip No binaries or modules to extract x.jar ok 744 # skip No binaries or modules to extract x.jar ok 745 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 746 - Archive type is_tbz recognized properly ok 747 - extract() for 'y.tar.bz2' reports success (PP: 0 Bin: 1) ok 748 - No errors capturing buffers ok 749 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 750 - Found correct output file 'y/z' ok 751 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 752 - Extract dir found ok 753 - Extract dir exists ok 754 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 755 - Output file successfully removed ok 756 - rmtree gave no error ok 757 - Extract dir successfully removed ok 758 # skip No buffers available ok 759 # skip No buffers available ok 760 # skip No buffers available ok 761 # skip No buffers available ok 762 # skip No buffers available ok 763 # skip No buffers available ok 764 # skip No buffers available ok 765 # skip No buffers available ok 766 - Output file successfully removed ok 767 # skip No extract path captured, can't remove paths ok 768 # skip No extract path captured, can't remove paths ok 769 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 770 - Archive type is_tbz recognized properly ok 771 - extract() for 'y.tar.bz2' reports success (PP: 0 Bin: 1) ok 772 - No errors capturing buffers ok 773 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 774 - Found correct output file 'y/z' ok 775 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 776 - Extract dir found ok 777 - Extract dir exists ok 778 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 779 - Output file successfully removed ok 780 - rmtree gave no error ok 781 - Extract dir successfully removed ok 782 # skip No buffers available ok 783 # skip No buffers available ok 784 # skip No buffers available ok 785 # skip No buffers available ok 786 # skip No buffers available ok 787 # skip No buffers available ok 788 # skip No buffers available ok 789 # skip No buffers available ok 790 - Output file successfully removed ok 791 # skip No extract path captured, can't remove paths ok 792 # skip No extract path captured, can't remove paths ok 793 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 794 - Archive type is_zip recognized properly ok 795 # skip No binaries or modules to extract x.ear ok 796 # skip No binaries or modules to extract x.ear ok 797 # skip No binaries or modules to extract x.ear ok 798 # skip No binaries or modules to extract x.ear ok 799 # skip No binaries or modules to extract x.ear ok 800 # skip No binaries or modules to extract x.ear ok 801 # skip No binaries or modules to extract x.ear ok 802 # skip No binaries or modules to extract x.ear ok 803 # skip No binaries or modules to extract x.ear ok 804 # skip No binaries or modules to extract x.ear ok 805 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 806 - Archive type is_tgz recognized properly ok 807 - extract() for 'y.tar.gz' reports success (PP: 0 Bin: 1) ok 808 - No errors capturing buffers ok 809 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 810 - Found correct output file 'y/z' ok 811 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 812 - Extract dir found ok 813 - Extract dir exists ok 814 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 815 - Output file successfully removed ok 816 - rmtree gave no error ok 817 - Extract dir successfully removed ok 818 # skip No buffers available ok 819 # skip No buffers available ok 820 # skip No buffers available ok 821 # skip No buffers available ok 822 # skip No buffers available ok 823 # skip No buffers available ok 824 # skip No buffers available ok 825 # skip No buffers available ok 826 - Output file successfully removed ok 827 # skip No extract path captured, can't remove paths ok 828 # skip No extract path captured, can't remove paths ok 829 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 830 - Archive type is_tgz recognized properly ok 831 - extract() for 'y.tar.gz' reports success (PP: 0 Bin: 1) ok 832 - No errors capturing buffers ok 833 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 834 - Found correct output file 'y/z' ok 835 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 836 - Extract dir found ok 837 - Extract dir exists ok 838 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 839 - Output file successfully removed ok 840 - rmtree gave no error ok 841 - Extract dir successfully removed ok 842 # skip No buffers available ok 843 # skip No buffers available ok 844 # skip No buffers available ok 845 # skip No buffers available ok 846 # skip No buffers available ok 847 # skip No buffers available ok 848 # skip No buffers available ok 849 # skip No buffers available ok 850 - Output file successfully removed ok 851 # skip No extract path captured, can't remove paths ok 852 # skip No extract path captured, can't remove paths ok 853 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 854 - Archive type is_zip recognized properly ok 855 # skip No binaries or modules to extract double_dir.zip ok 856 # skip No binaries or modules to extract double_dir.zip ok 857 # skip No binaries or modules to extract double_dir.zip ok 858 # skip No binaries or modules to extract double_dir.zip ok 859 # skip No binaries or modules to extract double_dir.zip ok 860 # skip No binaries or modules to extract double_dir.zip ok 861 # skip No binaries or modules to extract double_dir.zip ok 862 # skip No binaries or modules to extract double_dir.zip ok 863 # skip No binaries or modules to extract double_dir.zip ok 864 # skip No binaries or modules to extract double_dir.zip ok 865 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 866 - Archive type is_Z recognized properly ok 867 - extract() for 'x.Z' reports success (PP: 1 Bin: 0) ok 868 - No errors capturing buffers ok 869 - Found correct number of output files (a) ok 870 - Found correct output file 'a' ok 871 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 872 - Extract dir found ok 873 - Extract dir exists ok 874 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 875 - Output file successfully removed ok 876 - rmtree gave no error ok 877 - Extract dir successfully removed ok 878 - extract() for 'x.Z' reports success (PP: 1 Bin: 0) ok 879 - No errors capturing buffers ok 880 - Found correct number of output files (a) ok 881 - Found correct output file 'a' ok 882 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 883 - Extract dir found ok 884 - Extract dir exists ok 885 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 886 - Output file successfully removed ok 887 - rmtree gave no error ok 888 - Extract dir successfully removed ok 889 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 890 - Archive type is_txz recognized properly ok 891 # skip No binaries or modules to extract x.tar.xz ok 892 # skip No binaries or modules to extract x.tar.xz ok 893 # skip No binaries or modules to extract x.tar.xz ok 894 # skip No binaries or modules to extract x.tar.xz ok 895 # skip No binaries or modules to extract x.tar.xz ok 896 # skip No binaries or modules to extract x.tar.xz ok 897 # skip No binaries or modules to extract x.tar.xz ok 898 # skip No binaries or modules to extract x.tar.xz ok 899 # skip No binaries or modules to extract x.tar.xz ok 900 # skip No binaries or modules to extract x.tar.xz ok 901 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 902 - Archive type is_txz recognized properly ok 903 # skip No binaries or modules to extract x.tar.xz ok 904 # skip No binaries or modules to extract x.tar.xz ok 905 # skip No binaries or modules to extract x.tar.xz ok 906 # skip No binaries or modules to extract x.tar.xz ok 907 # skip No binaries or modules to extract x.tar.xz ok 908 # skip No binaries or modules to extract x.tar.xz ok 909 # skip No binaries or modules to extract x.tar.xz ok 910 # skip No binaries or modules to extract x.tar.xz ok 911 # skip No binaries or modules to extract x.tar.xz ok 912 # skip No binaries or modules to extract x.tar.xz ok 913 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 914 - Archive type is_zip recognized properly ok 915 - extract() for 'x.war' reports success (PP: 1 Bin: 0) ok 916 - No errors capturing buffers ok 917 - Found correct number of output files (a) ok 918 - Found correct output file 'a' ok 919 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 920 - Extract dir found ok 921 - Extract dir exists ok 922 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 923 - Output file successfully removed ok 924 - rmtree gave no error ok 925 - Extract dir successfully removed ok 926 - extract() for 'x.war' reports success (PP: 1 Bin: 0) ok 927 - No errors capturing buffers ok 928 - Found correct number of output files (a) ok 929 - Found correct output file 'a' ok 930 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 931 - Extract dir found ok 932 - Extract dir exists ok 933 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 934 - Output file successfully removed ok 935 - rmtree gave no error ok 936 - Extract dir successfully removed ok 937 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 938 - Archive type is_gz recognized properly ok 939 - extract() for 'x.gz' reports success (PP: 1 Bin: 0) ok 940 - No errors capturing buffers ok 941 - Found correct number of output files (a) ok 942 - Found correct output file 'a' ok 943 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 944 - Extract dir found ok 945 - Extract dir exists ok 946 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 947 - Output file successfully removed ok 948 - rmtree gave no error ok 949 - Extract dir successfully removed ok 950 - extract() for 'x.gz' reports success (PP: 1 Bin: 0) ok 951 - No errors capturing buffers ok 952 - Found correct number of output files (a) ok 953 - Found correct output file 'a' ok 954 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 955 - Extract dir found ok 956 - Extract dir exists ok 957 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 958 - Output file successfully removed ok 959 - rmtree gave no error ok 960 - Extract dir successfully removed ok 961 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 962 - Archive type is_txz recognized properly ok 963 # skip No binaries or modules to extract y.tar.xz ok 964 # skip No binaries or modules to extract y.tar.xz ok 965 # skip No binaries or modules to extract y.tar.xz ok 966 # skip No binaries or modules to extract y.tar.xz ok 967 # skip No binaries or modules to extract y.tar.xz ok 968 # skip No binaries or modules to extract y.tar.xz ok 969 # skip No binaries or modules to extract y.tar.xz ok 970 # skip No binaries or modules to extract y.tar.xz ok 971 # skip No binaries or modules to extract y.tar.xz ok 972 # skip No binaries or modules to extract y.tar.xz ok 973 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 974 - Archive type is_txz recognized properly ok 975 # skip No binaries or modules to extract y.tar.xz ok 976 # skip No binaries or modules to extract y.tar.xz ok 977 # skip No binaries or modules to extract y.tar.xz ok 978 # skip No binaries or modules to extract y.tar.xz ok 979 # skip No binaries or modules to extract y.tar.xz ok 980 # skip No binaries or modules to extract y.tar.xz ok 981 # skip No binaries or modules to extract y.tar.xz ok 982 # skip No binaries or modules to extract y.tar.xz ok 983 # skip No binaries or modules to extract y.tar.xz ok 984 # skip No binaries or modules to extract y.tar.xz ok 985 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 986 - Archive type is_bz2 recognized properly ok 987 - extract() for 'x.bz2' reports success (PP: 1 Bin: 0) ok 988 - No errors capturing buffers ok 989 - Found correct number of output files (a) ok 990 - Found correct output file 'a' ok 991 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 992 - Extract dir found ok 993 - Extract dir exists ok 994 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 995 - Output file successfully removed ok 996 - rmtree gave no error ok 997 - Extract dir successfully removed ok 998 - extract() for 'x.bz2' reports success (PP: 1 Bin: 0) ok 999 - No errors capturing buffers ok 1000 - Found correct number of output files (a) ok 1001 - Found correct output file 'a' ok 1002 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1003 - Extract dir found ok 1004 - Extract dir exists ok 1005 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1006 - Output file successfully removed ok 1007 - rmtree gave no error ok 1008 - Extract dir successfully removed ok 1009 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1010 - Archive type is_zip recognized properly ok 1011 - extract() for 'y.war' reports success (PP: 1 Bin: 0) ok 1012 - No errors capturing buffers ok 1013 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1014 - Found correct output file 'y/z' ok 1015 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1016 - Extract dir found ok 1017 - Extract dir exists ok 1018 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1019 - Output file successfully removed ok 1020 - rmtree gave no error ok 1021 - Extract dir successfully removed ok 1022 - extract() for 'y.war' reports success (PP: 1 Bin: 0) ok 1023 - No errors capturing buffers ok 1024 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1025 - Found correct output file 'y/z' ok 1026 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1027 - Extract dir found ok 1028 - Extract dir exists ok 1029 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1030 - Output file successfully removed ok 1031 - rmtree gave no error ok 1032 - Extract dir successfully removed ok 1033 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1034 - Archive type is_tar recognized properly ok 1035 - extract() for 'y.tar' reports success (PP: 1 Bin: 0) ok 1036 - No errors capturing buffers ok 1037 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1038 - Found correct output file 'y/z' ok 1039 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1040 - Extract dir found ok 1041 - Extract dir exists ok 1042 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1043 - Output file successfully removed ok 1044 - rmtree gave no error ok 1045 - Extract dir successfully removed ok 1046 - extract() for 'y.tar' reports success (PP: 1 Bin: 0) ok 1047 - No errors capturing buffers ok 1048 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1049 - Found correct output file 'y/z' ok 1050 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1051 - Extract dir found ok 1052 - Extract dir exists ok 1053 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1054 - Output file successfully removed ok 1055 - rmtree gave no error ok 1056 - Extract dir successfully removed ok 1057 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1058 - Archive type is_tar recognized properly ok 1059 - extract() for 'y.tar' reports success (PP: 1 Bin: 0) ok 1060 - No errors capturing buffers ok 1061 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1062 - Found correct output file 'y/z' ok 1063 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1064 - Extract dir found ok 1065 - Extract dir exists ok 1066 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1067 - Output file successfully removed ok 1068 - rmtree gave no error ok 1069 - Extract dir successfully removed ok 1070 - extract() for 'y.tar' reports success (PP: 1 Bin: 0) ok 1071 - No errors capturing buffers ok 1072 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1073 - Found correct output file 'y/z' ok 1074 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1075 - Extract dir found ok 1076 - Extract dir exists ok 1077 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1078 - Output file successfully removed ok 1079 - rmtree gave no error ok 1080 - Extract dir successfully removed ok 1081 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1082 - Archive type is_zip recognized properly ok 1083 - extract() for 'x.par' reports success (PP: 1 Bin: 0) ok 1084 - No errors capturing buffers ok 1085 - Found correct number of output files (a) ok 1086 - Found correct output file 'a' ok 1087 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1088 - Extract dir found ok 1089 - Extract dir exists ok 1090 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1091 - Output file successfully removed ok 1092 - rmtree gave no error ok 1093 - Extract dir successfully removed ok 1094 - extract() for 'x.par' reports success (PP: 1 Bin: 0) ok 1095 - No errors capturing buffers ok 1096 - Found correct number of output files (a) ok 1097 - Found correct output file 'a' ok 1098 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1099 - Extract dir found ok 1100 - Extract dir exists ok 1101 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1102 - Output file successfully removed ok 1103 - rmtree gave no error ok 1104 - Extract dir successfully removed ok 1105 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1106 - Archive type is_tbz recognized properly ok 1107 - extract() for 'y.tbz' reports success (PP: 1 Bin: 0) ok 1108 - No errors capturing buffers ok 1109 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1110 - Found correct output file 'y/z' ok 1111 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1112 - Extract dir found ok 1113 - Extract dir exists ok 1114 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1115 - Output file successfully removed ok 1116 - rmtree gave no error ok 1117 - Extract dir successfully removed ok 1118 - extract() for 'y.tbz' reports success (PP: 1 Bin: 0) ok 1119 - No errors capturing buffers ok 1120 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1121 - Found correct output file 'y/z' ok 1122 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1123 - Extract dir found ok 1124 - Extract dir exists ok 1125 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1126 - Output file successfully removed ok 1127 - rmtree gave no error ok 1128 - Extract dir successfully removed ok 1129 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1130 - Archive type is_tbz recognized properly ok 1131 - extract() for 'y.tbz' reports success (PP: 1 Bin: 0) ok 1132 - No errors capturing buffers ok 1133 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1134 - Found correct output file 'y/z' ok 1135 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1136 - Extract dir found ok 1137 - Extract dir exists ok 1138 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1139 - Output file successfully removed ok 1140 - rmtree gave no error ok 1141 - Extract dir successfully removed ok 1142 - extract() for 'y.tbz' reports success (PP: 1 Bin: 0) ok 1143 - No errors capturing buffers ok 1144 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1145 - Found correct output file 'y/z' ok 1146 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1147 - Extract dir found ok 1148 - Extract dir exists ok 1149 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1150 - Output file successfully removed ok 1151 - rmtree gave no error ok 1152 - Extract dir successfully removed ok 1153 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1154 - Archive type is_txz recognized properly ok 1155 # skip No binaries or modules to extract x.txz ok 1156 # skip No binaries or modules to extract x.txz ok 1157 # skip No binaries or modules to extract x.txz ok 1158 # skip No binaries or modules to extract x.txz ok 1159 # skip No binaries or modules to extract x.txz ok 1160 # skip No binaries or modules to extract x.txz ok 1161 # skip No binaries or modules to extract x.txz ok 1162 # skip No binaries or modules to extract x.txz ok 1163 # skip No binaries or modules to extract x.txz ok 1164 # skip No binaries or modules to extract x.txz ok 1165 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1166 - Archive type is_txz recognized properly ok 1167 # skip No binaries or modules to extract x.txz ok 1168 # skip No binaries or modules to extract x.txz ok 1169 # skip No binaries or modules to extract x.txz ok 1170 # skip No binaries or modules to extract x.txz ok 1171 # skip No binaries or modules to extract x.txz ok 1172 # skip No binaries or modules to extract x.txz ok 1173 # skip No binaries or modules to extract x.txz ok 1174 # skip No binaries or modules to extract x.txz ok 1175 # skip No binaries or modules to extract x.txz ok 1176 # skip No binaries or modules to extract x.txz ok 1177 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1178 - Archive type is_tgz recognized properly ok 1179 - extract() for 'y.tgz' reports success (PP: 1 Bin: 0) ok 1180 - No errors capturing buffers ok 1181 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1182 - Found correct output file 'y/z' ok 1183 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1184 - Extract dir found ok 1185 - Extract dir exists ok 1186 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1187 - Output file successfully removed ok 1188 - rmtree gave no error ok 1189 - Extract dir successfully removed ok 1190 - extract() for 'y.tgz' reports success (PP: 1 Bin: 0) ok 1191 - No errors capturing buffers ok 1192 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1193 - Found correct output file 'y/z' ok 1194 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1195 - Extract dir found ok 1196 - Extract dir exists ok 1197 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1198 - Output file successfully removed ok 1199 - rmtree gave no error ok 1200 - Extract dir successfully removed ok 1201 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1202 - Archive type is_tgz recognized properly ok 1203 - extract() for 'y.tgz' reports success (PP: 1 Bin: 0) ok 1204 - No errors capturing buffers ok 1205 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1206 - Found correct output file 'y/z' ok 1207 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1208 - Extract dir found ok 1209 - Extract dir exists ok 1210 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1211 - Output file successfully removed ok 1212 - rmtree gave no error ok 1213 - Extract dir successfully removed ok 1214 - extract() for 'y.tgz' reports success (PP: 1 Bin: 0) ok 1215 - No errors capturing buffers ok 1216 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1217 - Found correct output file 'y/z' ok 1218 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1219 - Extract dir found ok 1220 - Extract dir exists ok 1221 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1222 - Output file successfully removed ok 1223 - rmtree gave no error ok 1224 - Extract dir successfully removed ok 1225 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1226 - Archive type is_zip recognized properly ok 1227 - extract() for 'x.zip' reports success (PP: 1 Bin: 0) ok 1228 - No errors capturing buffers ok 1229 - Found correct number of output files (a) ok 1230 - Found correct output file 'a' ok 1231 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1232 - Extract dir found ok 1233 - Extract dir exists ok 1234 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1235 - Output file successfully removed ok 1236 - rmtree gave no error ok 1237 - Extract dir successfully removed ok 1238 - extract() for 'x.zip' reports success (PP: 1 Bin: 0) ok 1239 - No errors capturing buffers ok 1240 - Found correct number of output files (a) ok 1241 - Found correct output file 'a' ok 1242 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1243 - Extract dir found ok 1244 - Extract dir exists ok 1245 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1246 - Output file successfully removed ok 1247 - rmtree gave no error ok 1248 - Extract dir successfully removed ok 1249 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1250 - Archive type is_xz recognized properly ok 1251 # skip No binaries or modules to extract x.xz ok 1252 # skip No binaries or modules to extract x.xz ok 1253 # skip No binaries or modules to extract x.xz ok 1254 # skip No binaries or modules to extract x.xz ok 1255 # skip No binaries or modules to extract x.xz ok 1256 # skip No binaries or modules to extract x.xz ok 1257 # skip No binaries or modules to extract x.xz ok 1258 # skip No binaries or modules to extract x.xz ok 1259 # skip No binaries or modules to extract x.xz ok 1260 # skip No binaries or modules to extract x.xz ok 1261 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1262 - Archive type is_zip recognized properly ok 1263 - extract() for 'y.ear' reports success (PP: 1 Bin: 0) ok 1264 - No errors capturing buffers ok 1265 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1266 - Found correct output file 'y/z' ok 1267 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1268 - Extract dir found ok 1269 - Extract dir exists ok 1270 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1271 - Output file successfully removed ok 1272 - rmtree gave no error ok 1273 - Extract dir successfully removed ok 1274 - extract() for 'y.ear' reports success (PP: 1 Bin: 0) ok 1275 - No errors capturing buffers ok 1276 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1277 - Found correct output file 'y/z' ok 1278 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1279 - Extract dir found ok 1280 - Extract dir exists ok 1281 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1282 - Output file successfully removed ok 1283 - rmtree gave no error ok 1284 - Extract dir successfully removed ok 1285 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1286 - Archive type is_tgz recognized properly ok 1287 - extract() for 'x.tar.gz' reports success (PP: 1 Bin: 0) ok 1288 - No errors capturing buffers ok 1289 - Found correct number of output files (a) ok 1290 - Found correct output file 'a' ok 1291 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1292 - Extract dir found ok 1293 - Extract dir exists ok 1294 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1295 - Output file successfully removed ok 1296 - rmtree gave no error ok 1297 - Extract dir successfully removed ok 1298 - extract() for 'x.tar.gz' reports success (PP: 1 Bin: 0) ok 1299 - No errors capturing buffers ok 1300 - Found correct number of output files (a) ok 1301 - Found correct output file 'a' ok 1302 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1303 - Extract dir found ok 1304 - Extract dir exists ok 1305 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1306 - Output file successfully removed ok 1307 - rmtree gave no error ok 1308 - Extract dir successfully removed ok 1309 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1310 - Archive type is_tgz recognized properly ok 1311 - extract() for 'x.tar.gz' reports success (PP: 1 Bin: 0) ok 1312 - No errors capturing buffers ok 1313 - Found correct number of output files (a) ok 1314 - Found correct output file 'a' ok 1315 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1316 - Extract dir found ok 1317 - Extract dir exists ok 1318 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1319 - Output file successfully removed ok 1320 - rmtree gave no error ok 1321 - Extract dir successfully removed ok 1322 - extract() for 'x.tar.gz' reports success (PP: 1 Bin: 0) ok 1323 - No errors capturing buffers ok 1324 - Found correct number of output files (a) ok 1325 - Found correct output file 'a' ok 1326 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1327 - Extract dir found ok 1328 - Extract dir exists ok 1329 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1330 - Output file successfully removed ok 1331 - rmtree gave no error ok 1332 - Extract dir successfully removed ok 1333 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1334 - Archive type is_zip recognized properly ok 1335 - extract() for 'y.jar' reports success (PP: 1 Bin: 0) ok 1336 - No errors capturing buffers ok 1337 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1338 - Found correct output file 'y/z' ok 1339 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1340 - Extract dir found ok 1341 - Extract dir exists ok 1342 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1343 - Output file successfully removed ok 1344 - rmtree gave no error ok 1345 - Extract dir successfully removed ok 1346 - extract() for 'y.jar' reports success (PP: 1 Bin: 0) ok 1347 - No errors capturing buffers ok 1348 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1349 - Found correct output file 'y/z' ok 1350 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1351 - Extract dir found ok 1352 - Extract dir exists ok 1353 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1354 - Output file successfully removed ok 1355 - rmtree gave no error ok 1356 - Extract dir successfully removed ok 1357 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1358 - Archive type is_lzma recognized properly ok 1359 # skip No binaries or modules to extract x.lzma ok 1360 # skip No binaries or modules to extract x.lzma ok 1361 # skip No binaries or modules to extract x.lzma ok 1362 # skip No binaries or modules to extract x.lzma ok 1363 # skip No binaries or modules to extract x.lzma ok 1364 # skip No binaries or modules to extract x.lzma ok 1365 # skip No binaries or modules to extract x.lzma ok 1366 # skip No binaries or modules to extract x.lzma ok 1367 # skip No binaries or modules to extract x.lzma ok 1368 # skip No binaries or modules to extract x.lzma ok 1369 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1370 - Archive type is_tgz recognized properly ok 1371 - extract() for 'x.tgz' reports success (PP: 1 Bin: 0) ok 1372 - No errors capturing buffers ok 1373 - Found correct number of output files (a) ok 1374 - Found correct output file 'a' ok 1375 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1376 - Extract dir found ok 1377 - Extract dir exists ok 1378 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1379 - Output file successfully removed ok 1380 - rmtree gave no error ok 1381 - Extract dir successfully removed ok 1382 - extract() for 'x.tgz' reports success (PP: 1 Bin: 0) ok 1383 - No errors capturing buffers ok 1384 - Found correct number of output files (a) ok 1385 - Found correct output file 'a' ok 1386 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1387 - Extract dir found ok 1388 - Extract dir exists ok 1389 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1390 - Output file successfully removed ok 1391 - rmtree gave no error ok 1392 - Extract dir successfully removed ok 1393 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1394 - Archive type is_tgz recognized properly ok 1395 - extract() for 'x.tgz' reports success (PP: 1 Bin: 0) ok 1396 - No errors capturing buffers ok 1397 - Found correct number of output files (a) ok 1398 - Found correct output file 'a' ok 1399 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1400 - Extract dir found ok 1401 - Extract dir exists ok 1402 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1403 - Output file successfully removed ok 1404 - rmtree gave no error ok 1405 - Extract dir successfully removed ok 1406 - extract() for 'x.tgz' reports success (PP: 1 Bin: 0) ok 1407 - No errors capturing buffers ok 1408 - Found correct number of output files (a) ok 1409 - Found correct output file 'a' ok 1410 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1411 - Extract dir found ok 1412 - Extract dir exists ok 1413 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1414 - Output file successfully removed ok 1415 - rmtree gave no error ok 1416 - Extract dir successfully removed ok 1417 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1418 - Archive type is_zip recognized properly ok 1419 - extract() for 'y.zip' reports success (PP: 1 Bin: 0) ok 1420 - No errors capturing buffers ok 1421 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1422 - Found correct output file 'y/z' ok 1423 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1424 - Extract dir found ok 1425 - Extract dir exists ok 1426 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1427 - Output file successfully removed ok 1428 - rmtree gave no error ok 1429 - Extract dir successfully removed ok 1430 - extract() for 'y.zip' reports success (PP: 1 Bin: 0) ok 1431 - No errors capturing buffers ok 1432 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1433 - Found correct output file 'y/z' ok 1434 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1435 - Extract dir found ok 1436 - Extract dir exists ok 1437 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1438 - Output file successfully removed ok 1439 - rmtree gave no error ok 1440 - Extract dir successfully removed ok 1441 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1442 - Archive type is_txz recognized properly ok 1443 # skip No binaries or modules to extract y.txz ok 1444 # skip No binaries or modules to extract y.txz ok 1445 # skip No binaries or modules to extract y.txz ok 1446 # skip No binaries or modules to extract y.txz ok 1447 # skip No binaries or modules to extract y.txz ok 1448 # skip No binaries or modules to extract y.txz ok 1449 # skip No binaries or modules to extract y.txz ok 1450 # skip No binaries or modules to extract y.txz ok 1451 # skip No binaries or modules to extract y.txz ok 1452 # skip No binaries or modules to extract y.txz ok 1453 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1454 - Archive type is_txz recognized properly ok 1455 # skip No binaries or modules to extract y.txz ok 1456 # skip No binaries or modules to extract y.txz ok 1457 # skip No binaries or modules to extract y.txz ok 1458 # skip No binaries or modules to extract y.txz ok 1459 # skip No binaries or modules to extract y.txz ok 1460 # skip No binaries or modules to extract y.txz ok 1461 # skip No binaries or modules to extract y.txz ok 1462 # skip No binaries or modules to extract y.txz ok 1463 # skip No binaries or modules to extract y.txz ok 1464 # skip No binaries or modules to extract y.txz ok 1465 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1466 - Archive type is_zip recognized properly ok 1467 - extract() for 'y.par' reports success (PP: 1 Bin: 0) ok 1468 - No errors capturing buffers ok 1469 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1470 - Found correct output file 'y/z' ok 1471 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1472 - Extract dir found ok 1473 - Extract dir exists ok 1474 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1475 - Output file successfully removed ok 1476 - rmtree gave no error ok 1477 - Extract dir successfully removed ok 1478 - extract() for 'y.par' reports success (PP: 1 Bin: 0) ok 1479 - No errors capturing buffers ok 1480 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1481 - Found correct output file 'y/z' ok 1482 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1483 - Extract dir found ok 1484 - Extract dir exists ok 1485 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1486 - Output file successfully removed ok 1487 - rmtree gave no error ok 1488 - Extract dir successfully removed ok 1489 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1490 - Archive type is_tar recognized properly ok 1491 - extract() for 'x.tar' reports success (PP: 1 Bin: 0) ok 1492 - No errors capturing buffers ok 1493 - Found correct number of output files (a) ok 1494 - Found correct output file 'a' ok 1495 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1496 - Extract dir found ok 1497 - Extract dir exists ok 1498 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1499 - Output file successfully removed ok 1500 - rmtree gave no error ok 1501 - Extract dir successfully removed ok 1502 - extract() for 'x.tar' reports success (PP: 1 Bin: 0) ok 1503 - No errors capturing buffers ok 1504 - Found correct number of output files (a) ok 1505 - Found correct output file 'a' ok 1506 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1507 - Extract dir found ok 1508 - Extract dir exists ok 1509 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1510 - Output file successfully removed ok 1511 - rmtree gave no error ok 1512 - Extract dir successfully removed ok 1513 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1514 - Archive type is_tar recognized properly ok 1515 - extract() for 'x.tar' reports success (PP: 1 Bin: 0) ok 1516 - No errors capturing buffers ok 1517 - Found correct number of output files (a) ok 1518 - Found correct output file 'a' ok 1519 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1520 - Extract dir found ok 1521 - Extract dir exists ok 1522 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1523 - Output file successfully removed ok 1524 - rmtree gave no error ok 1525 - Extract dir successfully removed ok 1526 - extract() for 'x.tar' reports success (PP: 1 Bin: 0) ok 1527 - No errors capturing buffers ok 1528 - Found correct number of output files (a) ok 1529 - Found correct output file 'a' ok 1530 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1531 - Extract dir found ok 1532 - Extract dir exists ok 1533 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1534 - Output file successfully removed ok 1535 - rmtree gave no error ok 1536 - Extract dir successfully removed ok 1537 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1538 - Archive type is_zip recognized properly ok 1539 - extract() for 'x.jar' reports success (PP: 1 Bin: 0) ok 1540 - No errors capturing buffers ok 1541 - Found correct number of output files (a) ok 1542 - Found correct output file 'a' ok 1543 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1544 - Extract dir found ok 1545 - Extract dir exists ok 1546 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1547 - Output file successfully removed ok 1548 - rmtree gave no error ok 1549 - Extract dir successfully removed ok 1550 - extract() for 'x.jar' reports success (PP: 1 Bin: 0) ok 1551 - No errors capturing buffers ok 1552 - Found correct number of output files (a) ok 1553 - Found correct output file 'a' ok 1554 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1555 - Extract dir found ok 1556 - Extract dir exists ok 1557 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1558 - Output file successfully removed ok 1559 - rmtree gave no error ok 1560 - Extract dir successfully removed ok 1561 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1562 - Archive type is_tbz recognized properly ok 1563 - extract() for 'y.tar.bz2' reports success (PP: 1 Bin: 0) ok 1564 - No errors capturing buffers ok 1565 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1566 - Found correct output file 'y/z' ok 1567 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1568 - Extract dir found ok 1569 - Extract dir exists ok 1570 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1571 - Output file successfully removed ok 1572 - rmtree gave no error ok 1573 - Extract dir successfully removed ok 1574 - extract() for 'y.tar.bz2' reports success (PP: 1 Bin: 0) ok 1575 - No errors capturing buffers ok 1576 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1577 - Found correct output file 'y/z' ok 1578 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1579 - Extract dir found ok 1580 - Extract dir exists ok 1581 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1582 - Output file successfully removed ok 1583 - rmtree gave no error ok 1584 - Extract dir successfully removed ok 1585 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1586 - Archive type is_tbz recognized properly ok 1587 - extract() for 'y.tar.bz2' reports success (PP: 1 Bin: 0) ok 1588 - No errors capturing buffers ok 1589 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1590 - Found correct output file 'y/z' ok 1591 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1592 - Extract dir found ok 1593 - Extract dir exists ok 1594 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1595 - Output file successfully removed ok 1596 - rmtree gave no error ok 1597 - Extract dir successfully removed ok 1598 - extract() for 'y.tar.bz2' reports success (PP: 1 Bin: 0) ok 1599 - No errors capturing buffers ok 1600 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1601 - Found correct output file 'y/z' ok 1602 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1603 - Extract dir found ok 1604 - Extract dir exists ok 1605 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1606 - Output file successfully removed ok 1607 - rmtree gave no error ok 1608 - Extract dir successfully removed ok 1609 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1610 - Archive type is_zip recognized properly ok 1611 - extract() for 'x.ear' reports success (PP: 1 Bin: 0) ok 1612 - No errors capturing buffers ok 1613 - Found correct number of output files (a) ok 1614 - Found correct output file 'a' ok 1615 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1616 - Extract dir found ok 1617 - Extract dir exists ok 1618 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1619 - Output file successfully removed ok 1620 - rmtree gave no error ok 1621 - Extract dir successfully removed ok 1622 - extract() for 'x.ear' reports success (PP: 1 Bin: 0) ok 1623 - No errors capturing buffers ok 1624 - Found correct number of output files (a) ok 1625 - Found correct output file 'a' ok 1626 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1627 - Extract dir found ok 1628 - Extract dir exists ok 1629 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1630 - Output file successfully removed ok 1631 - rmtree gave no error ok 1632 - Extract dir successfully removed ok 1633 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1634 - Archive type is_tgz recognized properly ok 1635 - extract() for 'y.tar.gz' reports success (PP: 1 Bin: 0) ok 1636 - No errors capturing buffers ok 1637 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1638 - Found correct output file 'y/z' ok 1639 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1640 - Extract dir found ok 1641 - Extract dir exists ok 1642 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1643 - Output file successfully removed ok 1644 - rmtree gave no error ok 1645 - Extract dir successfully removed ok 1646 - extract() for 'y.tar.gz' reports success (PP: 1 Bin: 0) ok 1647 - No errors capturing buffers ok 1648 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1649 - Found correct output file 'y/z' ok 1650 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1651 - Extract dir found ok 1652 - Extract dir exists ok 1653 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1654 - Output file successfully removed ok 1655 - rmtree gave no error ok 1656 - Extract dir successfully removed ok 1657 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1658 - Archive type is_tgz recognized properly ok 1659 - extract() for 'y.tar.gz' reports success (PP: 1 Bin: 0) ok 1660 - No errors capturing buffers ok 1661 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1662 - Found correct output file 'y/z' ok 1663 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1664 - Extract dir found ok 1665 - Extract dir exists ok 1666 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1667 - Output file successfully removed ok 1668 - rmtree gave no error ok 1669 - Extract dir successfully removed ok 1670 - extract() for 'y.tar.gz' reports success (PP: 1 Bin: 0) ok 1671 - No errors capturing buffers ok 1672 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1673 - Found correct output file 'y/z' ok 1674 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1675 - Extract dir found ok 1676 - Extract dir exists ok 1677 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1678 - Output file successfully removed ok 1679 - rmtree gave no error ok 1680 - Extract dir successfully removed ok 1681 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1682 - Archive type is_zip recognized properly ok 1683 - extract() for 'double_dir.zip' reports success (PP: 1 Bin: 0) ok 1684 - No errors capturing buffers ok 1685 - Found correct number of output files (x/y/zLISTSEP_FLAGx/w) ok 1686 - Found correct output file 'x/w' ok 1687 - Output file '/build/libarchive-extract-perl-0.80/t/out/x/w' exists ok 1688 - Extract dir found ok 1689 - Extract dir exists ok 1690 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/x' ok 1691 - Output file successfully removed ok 1692 - rmtree gave no error ok 1693 - Extract dir successfully removed ok 1694 - extract() for 'double_dir.zip' reports success (PP: 1 Bin: 0) ok 1695 - No errors capturing buffers ok 1696 - Found correct number of output files (x/y/zLISTSEP_FLAGx/w) ok 1697 - Found correct output file 'x/w' ok 1698 - Output file '/build/libarchive-extract-perl-0.80/t/out/x/w' exists ok 1699 - Extract dir found ok 1700 - Extract dir exists ok 1701 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/x' ok 1702 - Output file successfully removed ok 1703 - rmtree gave no error ok 1704 - Extract dir successfully removed 1..1704 ok All tests successful. Files=1, Tests=1704, 30 wallclock secs ( 1.43 usr 0.15 sys + 9.41 cusr 5.95 csys = 16.94 CPU) Result: PASS make[1]: Leaving directory '/build/libarchive-extract-perl-0.80' fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install make -j1 install DESTDIR=/build/libarchive-extract-perl-0.80/debian/libarchive-extract-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/libarchive-extract-perl-0.80' Manifying 1 pod document Installing /build/libarchive-extract-perl-0.80/debian/libarchive-extract-perl/usr/share/perl5/Archive/Extract.pm Installing /build/libarchive-extract-perl-0.80/debian/libarchive-extract-perl/usr/share/man/man3/Archive::Extract.3pm make[1]: Leaving directory '/build/libarchive-extract-perl-0.80' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libarchive-extract-perl' in '../libarchive-extract-perl_0.80-1_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libarchive-extract-perl_0.80-1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/14886 and its subdirectories I: Current time: Wed May 20 21:39:08 -12 2020 I: pbuilder-time-stamp: 1590053948