I: pbuilder: network access will be disabled during build I: Current time: Mon May 25 08:15:08 -12 2020 I: pbuilder-time-stamp: 1590437708 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libhtml-strip-perl_2.10-1.dsc] I: copying [./libhtml-strip-perl_2.10.orig.tar.gz] I: copying [./libhtml-strip-perl_2.10-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Wed Jun 29 07:51:01 2016 -12 gpgv: using RSA key F823A2729883C97C gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libhtml-strip-perl_2.10-1.dsc dpkg-source: info: extracting libhtml-strip-perl in libhtml-strip-perl-2.10 dpkg-source: info: unpacking libhtml-strip-perl_2.10.orig.tar.gz dpkg-source: info: unpacking libhtml-strip-perl_2.10-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 0001_fix-typo-in-manpage.patch I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 9.20120312~), perl, libhtml-parser-perl, libtest-exception-perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 9.20120312~); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on libhtml-parser-perl; however: Package libhtml-parser-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-exception-perl; however: Package libtest-exception-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbsd0{a} libcroco3{a} libelf1{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libhtml-parser-perl{a} libhtml-tagset-perl{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libncurses6{a} libpipeline1{a} libsigsegv2{a} libsub-uplevel-perl{a} libtest-exception-perl{a} libtool{a} libuchardet0{a} liburi-perl{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libglib2.0-data libgpm2 libhttp-message-perl libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 38 newly installed, 0 to remove and 0 not upgraded. Need to get 18.5 MB of archives. After unpacking 64.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main armhf libbsd0 armhf 0.9.1-2 [103 kB] Get: 2 http://deb.debian.org/debian buster/main armhf bsdmainutils armhf 11.1.2+b1 [186 kB] Get: 3 http://deb.debian.org/debian buster/main armhf libuchardet0 armhf 0.0.6-3 [62.2 kB] Get: 4 http://deb.debian.org/debian buster/main armhf groff-base armhf 1.22.4-3 [828 kB] Get: 5 http://deb.debian.org/debian buster/main armhf libpipeline1 armhf 1.5.1-2 [26.8 kB] Get: 6 http://deb.debian.org/debian buster/main armhf man-db armhf 2.8.5-2 [1240 kB] Get: 7 http://deb.debian.org/debian buster/main armhf sensible-utils all 0.0.12 [15.8 kB] Get: 8 http://deb.debian.org/debian buster/main armhf libmagic-mgc armhf 1:5.35-4+deb10u1 [242 kB] Get: 9 http://deb.debian.org/debian buster/main armhf libmagic1 armhf 1:5.35-4+deb10u1 [110 kB] Get: 10 http://deb.debian.org/debian buster/main armhf file armhf 1:5.35-4+deb10u1 [65.5 kB] Get: 11 http://deb.debian.org/debian buster/main armhf gettext-base armhf 0.19.8.1-9 [118 kB] Get: 12 http://deb.debian.org/debian buster/main armhf libsigsegv2 armhf 2.12-2 [32.1 kB] Get: 13 http://deb.debian.org/debian buster/main armhf m4 armhf 1.4.18-2 [190 kB] Get: 14 http://deb.debian.org/debian buster/main armhf autoconf all 2.69-11 [341 kB] Get: 15 http://deb.debian.org/debian buster/main armhf autotools-dev all 20180224.1 [77.0 kB] Get: 16 http://deb.debian.org/debian buster/main armhf automake all 1:1.16.1-4 [771 kB] Get: 17 http://deb.debian.org/debian buster/main armhf autopoint all 0.19.8.1-9 [434 kB] Get: 18 http://deb.debian.org/debian buster/main armhf libtool all 2.4.6-9 [547 kB] Get: 19 http://deb.debian.org/debian buster/main armhf dh-autoreconf all 19 [16.9 kB] Get: 20 http://deb.debian.org/debian buster/main armhf libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 21 http://deb.debian.org/debian buster/main armhf libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 22 http://deb.debian.org/debian buster/main armhf dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 23 http://deb.debian.org/debian buster/main armhf libelf1 armhf 0.176-1.1 [158 kB] Get: 24 http://deb.debian.org/debian buster/main armhf dwz armhf 0.12-3 [72.0 kB] Get: 25 http://deb.debian.org/debian buster/main armhf libglib2.0-0 armhf 2.58.3-2+deb10u2 [1101 kB] Get: 26 http://deb.debian.org/debian buster/main armhf libicu63 armhf 63.1-6+deb10u1 [8005 kB] Get: 27 http://deb.debian.org/debian buster/main armhf libxml2 armhf 2.9.4+dfsg1-7+b3 [595 kB] Get: 28 http://deb.debian.org/debian buster/main armhf libcroco3 armhf 0.6.12-3 [133 kB] Get: 29 http://deb.debian.org/debian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [79.8 kB] Get: 30 http://deb.debian.org/debian buster/main armhf gettext armhf 0.19.8.1-9 [1242 kB] Get: 31 http://deb.debian.org/debian buster/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 32 http://deb.debian.org/debian buster/main armhf po-debconf all 1.0.21 [248 kB] Get: 33 http://deb.debian.org/debian buster/main armhf debhelper all 12.1.1 [1016 kB] Get: 34 http://deb.debian.org/debian buster/main armhf libhtml-tagset-perl all 3.20-3 [12.7 kB] Get: 35 http://deb.debian.org/debian buster/main armhf liburi-perl all 1.76-1 [89.9 kB] Get: 36 http://deb.debian.org/debian buster/main armhf libhtml-parser-perl armhf 3.72-3+b3 [102 kB] Get: 37 http://deb.debian.org/debian buster/main armhf libsub-uplevel-perl all 0.2800-1 [16.3 kB] Get: 38 http://deb.debian.org/debian buster/main armhf libtest-exception-perl all 0.43-1 [18.7 kB] Fetched 18.5 MB in 5s (3963 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_armhf.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../02-libuchardet0_0.0.6-3_armhf.deb ... Unpacking libuchardet0:armhf (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_armhf.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../04-libpipeline1_1.5.1-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_armhf.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../06-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../07-libmagic-mgc_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../08-libmagic1_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic1:armhf (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../09-file_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../10-gettext-base_0.19.8.1-9_armhf.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../11-libsigsegv2_2.12-2_armhf.deb ... Unpacking libsigsegv2:armhf (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-2_armhf.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../22-libelf1_0.176-1.1_armhf.deb ... Unpacking libelf1:armhf (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.12-3_armhf.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../24-libglib2.0-0_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:armhf. Preparing to unpack .../25-libicu63_63.1-6+deb10u1_armhf.deb ... Unpacking libicu63:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../26-libxml2_2.9.4+dfsg1-7+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../27-libcroco3_0.6.12-3_armhf.deb ... Unpacking libcroco3:armhf (0.6.12-3) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../28-libncurses6_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.19.8.1-9_armhf.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package libhtml-tagset-perl. Preparing to unpack .../33-libhtml-tagset-perl_3.20-3_all.deb ... Unpacking libhtml-tagset-perl (3.20-3) ... Selecting previously unselected package liburi-perl. Preparing to unpack .../34-liburi-perl_1.76-1_all.deb ... Unpacking liburi-perl (1.76-1) ... Selecting previously unselected package libhtml-parser-perl. Preparing to unpack .../35-libhtml-parser-perl_3.72-3+b3_armhf.deb ... Unpacking libhtml-parser-perl (3.72-3+b3) ... Selecting previously unselected package libsub-uplevel-perl. Preparing to unpack .../36-libsub-uplevel-perl_0.2800-1_all.deb ... Unpacking libsub-uplevel-perl (0.2800-1) ... Selecting previously unselected package libtest-exception-perl. Preparing to unpack .../37-libtest-exception-perl_0.43-1_all.deb ... Unpacking libtest-exception-perl (0.43-1) ... Setting up libpipeline1:armhf (1.5.1-2) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:armhf (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libhtml-tagset-perl (3.20-3) ... Setting up libmagic1:armhf (1:5.35-4+deb10u1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libicu63:armhf (63.1-6+deb10u1) ... Setting up autotools-dev (20180224.1) ... Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:armhf (2.12-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:armhf (0.0.6-3) ... Setting up libsub-uplevel-perl (0.2800-1) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up libelf1:armhf (0.176-1.1) ... Setting up libxml2:armhf (2.9.4+dfsg1-7+b3) ... Setting up liburi-perl (1.76-1) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libtool (2.4.6-9) ... Setting up m4 (1.4.18-2) ... Setting up libtest-exception-perl (0.43-1) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:armhf (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up libhtml-parser-perl (3.72-3+b3) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up gettext (0.19.8.1-9) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up po-debconf (1.0.21) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/libhtml-strip-perl-2.10/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package libhtml-strip-perl dpkg-buildpackage: info: source version 2.10-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Lucas Kanashiro dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_auto_configure perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -ffile-prefix-map=/build/libhtml-strip-perl-2.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=arm-linux-gnueabihf-gcc -g -O2 -ffile-prefix-map=/build/libhtml-strip-perl-2.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for HTML::Strip Writing MYMETA.yml and MYMETA.json dh_auto_build make -j1 make[1]: Entering directory '/build/libhtml-strip-perl-2.10' cp Strip.pm blib/lib/HTML/Strip.pm Running Mkbootstrap for Strip () chmod 644 "Strip.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Strip.bs blib/arch/auto/HTML/Strip/Strip.bs 644 "/usr/bin/perl" "/usr/share/perl/5.28/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.28/ExtUtils/typemap' -typemap '/build/libhtml-strip-perl-2.10/typemap' Strip.xs > Strip.xsc mv Strip.xsc Strip.c arm-linux-gnueabihf-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/build/libhtml-strip-perl-2.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"2.10\" -DXS_VERSION=\"2.10\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.28/CORE" Strip.c Strip.c: In function 'XS_HTML__Strip__xs_destroy': Strip.c:199:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] stripper = (Stripper *)SvIV((SV*)SvRV( ST(0) )); ^ Strip.c: In function 'XS_HTML__Strip__strip_html': Strip.c:231:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] stripper = (Stripper *)SvIV((SV*)SvRV( ST(0) )); ^ Strip.c: In function 'XS_HTML__Strip__reset': Strip.c:266:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] stripper = (Stripper *)SvIV((SV*)SvRV( ST(0) )); ^ Strip.c: In function 'XS_HTML__Strip_clear_striptags': Strip.c:289:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] stripper = (Stripper *)SvIV((SV*)SvRV( ST(0) )); ^ Strip.c: In function 'XS_HTML__Strip_add_striptag': Strip.c:314:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] stripper = (Stripper *)SvIV((SV*)SvRV( ST(0) )); ^ Strip.c: In function 'XS_HTML__Strip_set_emit_spaces': Strip.c:339:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] stripper = (Stripper *)SvIV((SV*)SvRV( ST(0) )); ^ Strip.c: In function 'XS_HTML__Strip_set_decode_entities': Strip.c:365:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] stripper = (Stripper *)SvIV((SV*)SvRV( ST(0) )); ^ Strip.c: In function 'XS_HTML__Strip_decode_entities': Strip.c:391:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] stripper = (Stripper *)SvIV((SV*)SvRV( ST(0) )); ^ Strip.c: In function 'XS_HTML__Strip__set_striptags_ref': Strip.c:433:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] stripper = (Stripper *)SvIV((SV*)SvRV( ST(0) )); ^ Strip.c: In function 'XS_HTML__Strip_set_auto_reset': Strip.c:464:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] stripper = (Stripper *)SvIV((SV*)SvRV( ST(0) )); ^ Strip.c: In function 'XS_HTML__Strip_auto_reset': Strip.c:490:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] stripper = (Stripper *)SvIV((SV*)SvRV( ST(0) )); ^ Strip.c: In function 'XS_HTML__Strip_set_debug': Strip.c:517:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] stripper = (Stripper *)SvIV((SV*)SvRV( ST(0) )); ^ Strip.c: In function 'XS_HTML__Strip_debug': Strip.c:543:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] stripper = (Stripper *)SvIV((SV*)SvRV( ST(0) )); ^ arm-linux-gnueabihf-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/build/libhtml-strip-perl-2.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"2.10\" -DXS_VERSION=\"2.10\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.28/CORE" strip_html.c strip_html.c: In function '_strip_html': strip_html.c:23:25: warning: implicit declaration of function 'utf8_char_width' [-Wimplicit-function-declaration] width = is_utf8_p ? utf8_char_width(p_raw) : 1; ^~~~~~~~~~~~~~~ rm -f blib/arch/auto/HTML/Strip/Strip.so arm-linux-gnueabihf-gcc -g -O2 -ffile-prefix-map=/build/libhtml-strip-perl-2.10=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Strip.o strip_html.o -o blib/arch/auto/HTML/Strip/Strip.so \ \ chmod 755 blib/arch/auto/HTML/Strip/Strip.so Manifying 1 pod document make[1]: Leaving directory '/build/libhtml-strip-perl-2.10' dh_auto_test make -j1 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libhtml-strip-perl-2.10' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Strip.bs blib/arch/auto/HTML/Strip/Strip.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/001_smoke.t ....................... 1..3 ok 1 - use HTML::Strip; ok 2 - constructor doesn't blow up ok 3 - ->parse() doesn't blow up ok t/100_basic.t ....................... 1..7 ok 1 - works with plain text ok 2 - works with | tags ok 3 - works with
tag ok 4 - works with tags with attributes ok 5 - strips tags ok 6 - strips tags ok 7 - strip comments ok t/200_comment.t ..................... 1..2 # Subtest: declarations 1..1 ok 1 - decls are stripped ok 1 - declarations # Subtest: comments 1..5 ok 1 - comments are stripped ok 2 - comments may contain ' ok 3 - comments may contain " ok 4 - weird decls are stripped ok 5 - edge case with <> ok ok 2 - comments ok t/210_auto_reset.t .................. 1..2 # Subtest: reset off 1..2 ok 1 ok 2 ok 1 - reset off # Subtest: reset on 1..2 ok 1 ok 2 ok 2 - reset on ok t/220_edge_case.t ................... 1..5 ok 1 - edge case with <> ok ok 2 - edge case with <>s ok ok 3 - test case ok 4 - test case ok 5 ok t/230_filter.t ...................... 1..2 # Subtest: no filter 1..1 ok 1 -   ok 1 - no filter # Subtest: whitespace filter 1..1 ok 1 - title text text ok 2 - whitespace filter ok t/240_striptags.t ................... 1..2 # Subtest: set_striptags( @ARRAY ) 1..2 ok 1 - set_striptags redefinition works ok 2 - set_striptags redefinition works ok 1 - set_striptags( @ARRAY ) # Subtest: set_striptags( LIST ) 1..3 ok 1 - stripping user-defined tags ok ok 2 - stripping user-defined tags ok ok 3 - stripping user-defined tags ok ok 2 - set_striptags( LIST ) ok t/250_whitespace_single_char.t ...... 1..1 ok 1 - whitespace single character bug ok t/260_offbyone.t .................... 1..1 ok 1 ok t/270_mathematical_comparisons.t .... 1..2 # Subtest: RT#35345 1..1 ok 1 - mathematical comparisons in strip tags bug RT\#35345 ok 1 - RT\#35345 # Subtest: RT#99207 1..1 ok 1 - mathematical comparisons in strip tags bug RT\#99207 ok 2 - RT\#99207 ok t/280_invalid_multiline_segfault.t .. 1..2 ok 1 ok 2 - no segfault ok t/300_utf8.t ........................ 1..5 ok 1 ok 2 ok 3 - Text comes back as UTF-8 ok 4 ok 5 # TODO emit_spaces after '»' is inconsistent on other arch/versions ok t/310_latin1.t ...................... 1..4 ok 1 - parse latin1 string

ø

ok 2 - parse decoded string

ø

ok 3 - parse latin1 string

æ

ok 4 - parse decoded string

æ

ok t/400_kwalitee.t .................... skipped: these tests are for release candidate testing t/410_pod.t ......................... skipped: Test::Pod 1.00 required for testing POD t/420_pod_coverage.t ................ skipped: Test::Pod::Coverage 1.00 required for testing POD coverage All tests successful. Test Summary Report ------------------- t/300_utf8.t (Wstat: 0 Tests: 5 Failed: 0) TODO passed: 5 Files=16, Tests=38, 16 wallclock secs ( 0.49 usr 0.08 sys + 12.17 cusr 1.21 csys = 13.95 CPU) Result: PASS make[1]: Leaving directory '/build/libhtml-strip-perl-2.10' fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install make -j1 install DESTDIR=/build/libhtml-strip-perl-2.10/debian/libhtml-strip-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/libhtml-strip-perl-2.10' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Strip.bs blib/arch/auto/HTML/Strip/Strip.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/libhtml-strip-perl-2.10/debian/libhtml-strip-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/auto/HTML/Strip/Strip.so Installing /build/libhtml-strip-perl-2.10/debian/libhtml-strip-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/HTML/Strip.pm Installing /build/libhtml-strip-perl-2.10/debian/libhtml-strip-perl/usr/share/man/man3/HTML::Strip.3pm make[1]: Leaving directory '/build/libhtml-strip-perl-2.10' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_strip dh_makeshlibs dh_shlibdeps dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libhtml-strip-perl' in '../libhtml-strip-perl_2.10-1_armhf.deb'. dpkg-deb: building package 'libhtml-strip-perl-dbgsym' in '../libhtml-strip-perl-dbgsym_2.10-1_armhf.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libhtml-strip-perl_2.10-1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/29622 and its subdirectories I: Current time: Mon May 25 08:22:27 -12 2020 I: pbuilder-time-stamp: 1590438147