I: pbuilder: network access will be disabled during build I: Current time: Tue Sep 22 14:23:55 -12 2020 I: pbuilder-time-stamp: 1600827835 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libperlio-gzip-perl_0.19-1.dsc] I: copying [./libperlio-gzip-perl_0.19.orig.tar.gz] I: copying [./libperlio-gzip-perl_0.19-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Mon Nov 9 08:30:59 2015 -12 gpgv: using RSA key BB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libperlio-gzip-perl_0.19-1.dsc dpkg-source: info: extracting libperlio-gzip-perl in libperlio-gzip-perl-0.19 dpkg-source: info: unpacking libperlio-gzip-perl_0.19.orig.tar.gz dpkg-source: info: unpacking libperlio-gzip-perl_0.19-1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/16819/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3' DISTRIBUTION='' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='78b70f75e15340c0bf137d2bf5c3a012' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='16819' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.jMA2HTDWrw/pbuilderrc_3vHA --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/buster-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.jMA2HTDWrw/b1 --logfile b1/build.log libperlio-gzip-perl_0.19-1.dsc' SUDO_GID='116' SUDO_UID='112' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:8000/' I: uname -a Linux cbxi4b 4.19.0-10-armmp #1 SMP Debian 4.19.132-1 (2020-07-24) armv7l GNU/Linux I: ls -l /bin total 3328 -rwxr-xr-x 1 root root 767656 Apr 17 2019 bash -rwxr-xr-x 3 root root 26052 Jul 10 2019 bunzip2 -rwxr-xr-x 3 root root 26052 Jul 10 2019 bzcat lrwxrwxrwx 1 root root 6 Jul 10 2019 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2227 Jul 10 2019 bzdiff lrwxrwxrwx 1 root root 6 Jul 10 2019 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Jun 24 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 10 2019 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3641 Jul 10 2019 bzgrep -rwxr-xr-x 3 root root 26052 Jul 10 2019 bzip2 -rwxr-xr-x 1 root root 9636 Jul 10 2019 bzip2recover lrwxrwxrwx 1 root root 6 Jul 10 2019 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 10 2019 bzmore -rwxr-xr-x 1 root root 22432 Feb 28 2019 cat -rwxr-xr-x 1 root root 38868 Feb 28 2019 chgrp -rwxr-xr-x 1 root root 38836 Feb 28 2019 chmod -rwxr-xr-x 1 root root 42972 Feb 28 2019 chown -rwxr-xr-x 1 root root 88376 Feb 28 2019 cp -rwxr-xr-x 1 root root 75516 Jan 17 2019 dash -rwxr-xr-x 1 root root 71648 Feb 28 2019 date -rwxr-xr-x 1 root root 51212 Feb 28 2019 dd -rwxr-xr-x 1 root root 55672 Feb 28 2019 df -rwxr-xr-x 1 root root 88444 Feb 28 2019 dir -rwxr-xr-x 1 root root 54872 Jan 9 2019 dmesg lrwxrwxrwx 1 root root 8 Sep 26 2018 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Sep 26 2018 domainname -> hostname -rwxr-xr-x 1 root root 22364 Feb 28 2019 echo -rwxr-xr-x 1 root root 28 Jan 7 2019 egrep -rwxr-xr-x 1 root root 18260 Feb 28 2019 false -rwxr-xr-x 1 root root 28 Jan 7 2019 fgrep -rwxr-xr-x 1 root root 47356 Jan 9 2019 findmnt -rwsr-xr-x 1 root root 21980 Apr 22 07:38 fusermount -rwxr-xr-x 1 root root 124508 Jan 7 2019 grep -rwxr-xr-x 2 root root 2345 Jan 5 2019 gunzip -rwxr-xr-x 1 root root 6375 Jan 5 2019 gzexe -rwxr-xr-x 1 root root 64232 Jan 5 2019 gzip -rwxr-xr-x 1 root root 13784 Sep 26 2018 hostname -rwxr-xr-x 1 root root 43044 Feb 28 2019 ln -rwxr-xr-x 1 root root 34932 Jul 26 2018 login -rwxr-xr-x 1 root root 88444 Feb 28 2019 ls -rwxr-xr-x 1 root root 67036 Jan 9 2019 lsblk -rwxr-xr-x 1 root root 47168 Feb 28 2019 mkdir -rwxr-xr-x 1 root root 43040 Feb 28 2019 mknod -rwxr-xr-x 1 root root 26552 Feb 28 2019 mktemp -rwxr-xr-x 1 root root 26024 Jan 9 2019 more -rwsr-xr-x 1 root root 34268 Jan 9 2019 mount -rwxr-xr-x 1 root root 9688 Jan 9 2019 mountpoint -rwxr-xr-x 1 root root 84284 Feb 28 2019 mv lrwxrwxrwx 1 root root 8 Sep 26 2018 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Feb 14 2019 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 22416 Feb 28 2019 pwd lrwxrwxrwx 1 root root 4 Apr 17 2019 rbash -> bash -rwxr-xr-x 1 root root 26504 Feb 28 2019 readlink -rwxr-xr-x 1 root root 42968 Feb 28 2019 rm -rwxr-xr-x 1 root root 26496 Feb 28 2019 rmdir -rwxr-xr-x 1 root root 14136 Jan 21 2019 run-parts -rwxr-xr-x 1 root root 76012 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Sep 20 20:27 sh -> dash -rwxr-xr-x 1 root root 22384 Feb 28 2019 sleep -rwxr-xr-x 1 root root 51124 Feb 28 2019 stty -rwsr-xr-x 1 root root 42472 Jan 9 2019 su -rwxr-xr-x 1 root root 22392 Feb 28 2019 sync -rwxr-xr-x 1 root root 283324 Apr 23 2019 tar -rwxr-xr-x 1 root root 9808 Jan 21 2019 tempfile -rwxr-xr-x 1 root root 63464 Feb 28 2019 touch -rwxr-xr-x 1 root root 18260 Feb 28 2019 true -rwxr-xr-x 1 root root 9636 Apr 22 07:38 ulockmgr_server -rwsr-xr-x 1 root root 21976 Jan 9 2019 umount -rwxr-xr-x 1 root root 22380 Feb 28 2019 uname -rwxr-xr-x 2 root root 2345 Jan 5 2019 uncompress -rwxr-xr-x 1 root root 88444 Feb 28 2019 vdir -rwxr-xr-x 1 root root 21980 Jan 9 2019 wdctl -rwxr-xr-x 1 root root 946 Jan 21 2019 which lrwxrwxrwx 1 root root 8 Sep 26 2018 ypdomainname -> hostname -rwxr-xr-x 1 root root 1983 Jan 5 2019 zcat -rwxr-xr-x 1 root root 1677 Jan 5 2019 zcmp -rwxr-xr-x 1 root root 5879 Jan 5 2019 zdiff -rwxr-xr-x 1 root root 29 Jan 5 2019 zegrep -rwxr-xr-x 1 root root 29 Jan 5 2019 zfgrep -rwxr-xr-x 1 root root 2080 Jan 5 2019 zforce -rwxr-xr-x 1 root root 7584 Jan 5 2019 zgrep -rwxr-xr-x 1 root root 2205 Jan 5 2019 zless -rwxr-xr-x 1 root root 1841 Jan 5 2019 zmore -rwxr-xr-x 1 root root 4552 Jan 5 2019 znew I: user script /srv/workspace/pbuilder/16819/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: perl, debhelper (>= 9.20120312~), zlib1g-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 9.20120312~); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on zlib1g-dev; however: Package zlib1g-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbsd0{a} libcroco3{a} libelf1{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libncurses6{a} libpipeline1{a} libsigsegv2{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libglib2.0-data libgpm2 libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 34 newly installed, 0 to remove and 0 not upgraded. Need to get 18.4 MB of archives. After unpacking 63.9 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main armhf libbsd0 armhf 0.9.1-2 [103 kB] Get: 2 http://deb.debian.org/debian buster/main armhf bsdmainutils armhf 11.1.2+b1 [186 kB] Get: 3 http://deb.debian.org/debian buster/main armhf libuchardet0 armhf 0.0.6-3 [62.2 kB] Get: 4 http://deb.debian.org/debian buster/main armhf groff-base armhf 1.22.4-3 [828 kB] Get: 5 http://deb.debian.org/debian buster/main armhf libpipeline1 armhf 1.5.1-2 [26.8 kB] Get: 6 http://deb.debian.org/debian buster/main armhf man-db armhf 2.8.5-2 [1240 kB] Get: 7 http://deb.debian.org/debian buster/main armhf sensible-utils all 0.0.12 [15.8 kB] Get: 8 http://deb.debian.org/debian buster/main armhf libmagic-mgc armhf 1:5.35-4+deb10u1 [242 kB] Get: 9 http://deb.debian.org/debian buster/main armhf libmagic1 armhf 1:5.35-4+deb10u1 [110 kB] Get: 10 http://deb.debian.org/debian buster/main armhf file armhf 1:5.35-4+deb10u1 [65.5 kB] Get: 11 http://deb.debian.org/debian buster/main armhf gettext-base armhf 0.19.8.1-9 [118 kB] Get: 12 http://deb.debian.org/debian buster/main armhf libsigsegv2 armhf 2.12-2 [32.1 kB] Get: 13 http://deb.debian.org/debian buster/main armhf m4 armhf 1.4.18-2 [190 kB] Get: 14 http://deb.debian.org/debian buster/main armhf autoconf all 2.69-11 [341 kB] Get: 15 http://deb.debian.org/debian buster/main armhf autotools-dev all 20180224.1 [77.0 kB] Get: 16 http://deb.debian.org/debian buster/main armhf automake all 1:1.16.1-4 [771 kB] Get: 17 http://deb.debian.org/debian buster/main armhf autopoint all 0.19.8.1-9 [434 kB] Get: 18 http://deb.debian.org/debian buster/main armhf libtool all 2.4.6-9 [547 kB] Get: 19 http://deb.debian.org/debian buster/main armhf dh-autoreconf all 19 [16.9 kB] Get: 20 http://deb.debian.org/debian buster/main armhf libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 21 http://deb.debian.org/debian buster/main armhf libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 22 http://deb.debian.org/debian buster/main armhf dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 23 http://deb.debian.org/debian buster/main armhf libelf1 armhf 0.176-1.1 [158 kB] Get: 24 http://deb.debian.org/debian buster/main armhf dwz armhf 0.12-3 [72.0 kB] Get: 25 http://deb.debian.org/debian buster/main armhf libglib2.0-0 armhf 2.58.3-2+deb10u2 [1101 kB] Get: 26 http://deb.debian.org/debian buster/main armhf libicu63 armhf 63.1-6+deb10u1 [8005 kB] Get: 27 http://deb.debian.org/debian buster/main armhf libxml2 armhf 2.9.4+dfsg1-7+b3 [595 kB] Get: 28 http://deb.debian.org/debian buster/main armhf libcroco3 armhf 0.6.12-3 [133 kB] Get: 29 http://deb.debian.org/debian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [79.8 kB] Get: 30 http://deb.debian.org/debian buster/main armhf gettext armhf 0.19.8.1-9 [1242 kB] Get: 31 http://deb.debian.org/debian buster/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 32 http://deb.debian.org/debian buster/main armhf po-debconf all 1.0.21 [248 kB] Get: 33 http://deb.debian.org/debian buster/main armhf debhelper all 12.1.1 [1016 kB] Get: 34 http://deb.debian.org/debian buster/main armhf zlib1g-dev armhf 1:1.2.11.dfsg-1 [207 kB] Fetched 18.4 MB in 2s (8020 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_armhf.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../02-libuchardet0_0.0.6-3_armhf.deb ... Unpacking libuchardet0:armhf (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_armhf.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../04-libpipeline1_1.5.1-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_armhf.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../06-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../07-libmagic-mgc_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../08-libmagic1_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic1:armhf (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../09-file_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../10-gettext-base_0.19.8.1-9_armhf.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../11-libsigsegv2_2.12-2_armhf.deb ... Unpacking libsigsegv2:armhf (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-2_armhf.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../22-libelf1_0.176-1.1_armhf.deb ... Unpacking libelf1:armhf (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.12-3_armhf.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../24-libglib2.0-0_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:armhf. Preparing to unpack .../25-libicu63_63.1-6+deb10u1_armhf.deb ... Unpacking libicu63:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../26-libxml2_2.9.4+dfsg1-7+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../27-libcroco3_0.6.12-3_armhf.deb ... Unpacking libcroco3:armhf (0.6.12-3) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../28-libncurses6_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.19.8.1-9_armhf.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package zlib1g-dev:armhf. Preparing to unpack .../33-zlib1g-dev_1%3a1.2.11.dfsg-1_armhf.deb ... Unpacking zlib1g-dev:armhf (1:1.2.11.dfsg-1) ... Setting up libpipeline1:armhf (1.5.1-2) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:armhf (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libmagic1:armhf (1:5.35-4+deb10u1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libicu63:armhf (63.1-6+deb10u1) ... Setting up autotools-dev (20180224.1) ... Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:armhf (2.12-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up zlib1g-dev:armhf (1:1.2.11.dfsg-1) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:armhf (0.0.6-3) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up libelf1:armhf (0.176-1.1) ... Setting up libxml2:armhf (2.9.4+dfsg1-7+b3) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libtool (2.4.6-9) ... Setting up m4 (1.4.18-2) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:armhf (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up gettext (0.19.8.1-9) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up po-debconf (1.0.21) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/libperlio-gzip-perl-0.19/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package libperlio-gzip-perl dpkg-buildpackage: info: source version 0.19-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_auto_configure perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -ffile-prefix-map=/build/libperlio-gzip-perl-0.19=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=arm-linux-gnueabihf-gcc -g -O2 -ffile-prefix-map=/build/libperlio-gzip-perl-0.19=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for PerlIO::gzip Writing MYMETA.yml and MYMETA.json dh_auto_build make -j1 make[1]: Entering directory '/build/libperlio-gzip-perl-0.19' cp gzip.pm blib/lib/PerlIO/gzip.pm Running Mkbootstrap for gzip () chmod 644 "gzip.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 "/usr/bin/perl" "/usr/share/perl/5.28/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.28/ExtUtils/typemap' gzip.xs > gzip.xsc mv gzip.xsc gzip.c arm-linux-gnueabihf-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -ffile-prefix-map=/build/libperlio-gzip-perl-0.19=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.19\" -DXS_VERSION=\"0.19\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.28/CORE" gzip.c rm -f blib/arch/auto/PerlIO/gzip/gzip.so arm-linux-gnueabihf-gcc -g -O2 -ffile-prefix-map=/build/libperlio-gzip-perl-0.19=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong gzip.o -o blib/arch/auto/PerlIO/gzip/gzip.so \ -lz \ chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so Manifying 1 pod document make[1]: Leaving directory '/build/libperlio-gzip-perl-0.19' dh_auto_test make -j1 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libperlio-gzip-perl-0.19' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/read.t ... 1..301 ok 1 - Does it even load? ok 2 - open ok3.gz with <:gzip ok 3 ok 4 - should be end of file ok 5 - close it again ok 6 - open ok3.gz with <:gzip() ok 7 ok 8 - should be end of file ok 9 - close it again ok 10 - open ok3.gz with <:gzip(gzip) ok 11 ok 12 - should be end of file ok 13 - close it again ok 14 - open ok3.gz with <:gzip(lazy) ok 15 ok 16 - should be end of file ok 17 - close it again ok 18 - open ok3.gz with <:gzip(gzip,lazy) ok 19 ok 20 - should be end of file ok 21 - close it again ok 22 - README should open ok 23 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 24 - open ok17.gz with <:gzip ok 25 ok 26 - should be end of file ok 27 - close it ok 28 - open ok19 with <:gzip(none) ok 29 ok 30 - open ok21 with < ok 31 ok 32 - Ho ho ho. Switch to gunzip mid stream. ok 33 ok 34 - open ok19 with <:gzip(auto) ok 35 ok 36 - should be end of file ok 37 - close it ok 38 - open ok3.gz with <:gzip(auto) ok 39 ok 40 - should be end of file ok 41 - close it ok 42 - open ok19 with <:gzip(lazy,auto) ok 43 ok 44 - should be end of file ok 45 - close it ok 46 - open ok3.gz with <:gzip(auto,lazy) ok 47 ok 48 - should be end of file ok 49 - close it ok 50 - README should open in lazy mode ok 51 - but should fail on first read ok 52 - README should open in auto mode ok 53 - but should fail on first read ok 54 - README should open in auto,lazy mode ok 55 - but should fail on first read # Attempting to run 'gzip -c --fast /usr/bin/perl >perl.gz' ok 56 - open perl.gz ok 57 - compare with original /usr/bin/perl ok 58 - should be end of file ok 59 - close perl.gz ok 60 - open README with <:gzip(autopop) ok 61 - read first line ok 62 - check second line ok 63 - open ok3.gz with <:gzip(autopop) ok 64 ok 65 - open ok50.gz.short with <:gzip ok 66 ok 67 - should be end of file ok 68 - close should fail ok 69 - open ok54.gz.len with <:gzip ok 70 ok 71 - should be end of file ok 72 - close should fail ok 73 - open ok58.gz.crc with <:gzip ok 74 ok 75 - should be end of file ok 76 - close should fail ok 77 - open ok3.gz with <:unix:gzip ok 78 ok 79 - should be end of file ok 80 - close it again ok 81 - open ok3.gz with <:unix:gzip() ok 82 ok 83 - should be end of file ok 84 - close it again ok 85 - open ok3.gz with <:unix:gzip(gzip) ok 86 ok 87 - should be end of file ok 88 - close it again ok 89 - open ok3.gz with <:unix:gzip(lazy) ok 90 ok 91 - should be end of file ok 92 - close it again ok 93 - open ok3.gz with <:unix:gzip(gzip,lazy) ok 94 ok 95 - should be end of file ok 96 - close it again ok 97 - README should open ok 98 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 99 - open ok17.gz with <:unix:gzip ok 100 ok 101 - should be end of file ok 102 - close it ok 103 - open ok19 with <:unix:gzip(none) ok 104 ok 105 - open ok21 with <:unix ok 106 ok 107 - Ho ho ho. Switch to gunzip mid stream. ok 108 ok 109 - open ok19 with <:unix:gzip(auto) ok 110 ok 111 - should be end of file ok 112 - close it ok 113 - open ok3.gz with <:unix:gzip(auto) ok 114 ok 115 - should be end of file ok 116 - close it ok 117 - open ok19 with <:unix:gzip(lazy,auto) ok 118 ok 119 - should be end of file ok 120 - close it ok 121 - open ok3.gz with <:unix:gzip(auto,lazy) ok 122 ok 123 - should be end of file ok 124 - close it ok 125 - README should open in lazy mode ok 126 - but should fail on first read ok 127 - README should open in auto mode ok 128 - but should fail on first read ok 129 - README should open in auto,lazy mode ok 130 - but should fail on first read ok 131 - open perl.gz ok 132 - compare with original /usr/bin/perl ok 133 - should be end of file ok 134 - close perl.gz ok 135 - open README with <:unix:gzip(autopop) ok 136 - read first line ok 137 - check second line ok 138 - open ok3.gz with <:unix:gzip(autopop) ok 139 ok 140 - open ok50.gz.short with <:unix:gzip ok 141 ok 142 - should be end of file ok 143 - close should fail ok 144 - open ok54.gz.len with <:unix:gzip ok 145 ok 146 - should be end of file ok 147 - close should fail ok 148 - open ok58.gz.crc with <:unix:gzip ok 149 ok 150 - should be end of file ok 151 - close should fail ok 152 - open ok3.gz with <:stdio:gzip ok 153 ok 154 - should be end of file ok 155 - close it again ok 156 - open ok3.gz with <:stdio:gzip() ok 157 ok 158 - should be end of file ok 159 - close it again ok 160 - open ok3.gz with <:stdio:gzip(gzip) ok 161 ok 162 - should be end of file ok 163 - close it again ok 164 - open ok3.gz with <:stdio:gzip(lazy) ok 165 ok 166 - should be end of file ok 167 - close it again ok 168 - open ok3.gz with <:stdio:gzip(gzip,lazy) ok 169 ok 170 - should be end of file ok 171 - close it again ok 172 - README should open ok 173 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 174 - open ok17.gz with <:stdio:gzip ok 175 ok 176 - should be end of file ok 177 - close it ok 178 - open ok19 with <:stdio:gzip(none) ok 179 ok 180 - open ok21 with <:stdio ok 181 ok 182 - Ho ho ho. Switch to gunzip mid stream. ok 183 ok 184 - open ok19 with <:stdio:gzip(auto) ok 185 ok 186 - should be end of file ok 187 - close it ok 188 - open ok3.gz with <:stdio:gzip(auto) ok 189 ok 190 - should be end of file ok 191 - close it ok 192 - open ok19 with <:stdio:gzip(lazy,auto) ok 193 ok 194 - should be end of file ok 195 - close it ok 196 - open ok3.gz with <:stdio:gzip(auto,lazy) ok 197 ok 198 - should be end of file ok 199 - close it ok 200 - README should open in lazy mode ok 201 - but should fail on first read ok 202 - README should open in auto mode ok 203 - but should fail on first read ok 204 - README should open in auto,lazy mode ok 205 - but should fail on first read ok 206 - open perl.gz ok 207 - compare with original /usr/bin/perl ok 208 - should be end of file ok 209 - close perl.gz ok 210 - open README with <:stdio:gzip(autopop) ok 211 - read first line ok 212 - check second line ok 213 - open ok3.gz with <:stdio:gzip(autopop) ok 214 ok 215 - open ok50.gz.short with <:stdio:gzip ok 216 ok 217 - should be end of file ok 218 - close should fail ok 219 - open ok54.gz.len with <:stdio:gzip ok 220 ok 221 - should be end of file ok 222 - close should fail ok 223 - open ok58.gz.crc with <:stdio:gzip ok 224 ok 225 - should be end of file ok 226 - close should fail ok 227 - open ok3.gz with <:perlio:gzip ok 228 ok 229 - should be end of file ok 230 - close it again ok 231 - open ok3.gz with <:perlio:gzip() ok 232 ok 233 - should be end of file ok 234 - close it again ok 235 - open ok3.gz with <:perlio:gzip(gzip) ok 236 ok 237 - should be end of file ok 238 - close it again ok 239 - open ok3.gz with <:perlio:gzip(lazy) ok 240 ok 241 - should be end of file ok 242 - close it again ok 243 - open ok3.gz with <:perlio:gzip(gzip,lazy) ok 244 ok 245 - should be end of file ok 246 - close it again ok 247 - README should open ok 248 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 249 - open ok17.gz with <:perlio:gzip ok 250 ok 251 - should be end of file ok 252 - close it ok 253 - open ok19 with <:perlio:gzip(none) ok 254 ok 255 - open ok21 with <:perlio ok 256 ok 257 - Ho ho ho. Switch to gunzip mid stream. ok 258 ok 259 - open ok19 with <:perlio:gzip(auto) ok 260 ok 261 - should be end of file ok 262 - close it ok 263 - open ok3.gz with <:perlio:gzip(auto) ok 264 ok 265 - should be end of file ok 266 - close it ok 267 - open ok19 with <:perlio:gzip(lazy,auto) ok 268 ok 269 - should be end of file ok 270 - close it ok 271 - open ok3.gz with <:perlio:gzip(auto,lazy) ok 272 ok 273 - should be end of file ok 274 - close it ok 275 - README should open in lazy mode ok 276 - but should fail on first read ok 277 - README should open in auto mode ok 278 - but should fail on first read ok 279 - README should open in auto,lazy mode ok 280 - but should fail on first read ok 281 - open perl.gz ok 282 - compare with original /usr/bin/perl ok 283 - should be end of file ok 284 - close perl.gz ok 285 - open README with <:perlio:gzip(autopop) ok 286 - read first line ok 287 - check second line ok 288 - open ok3.gz with <:perlio:gzip(autopop) ok 289 ok 290 - open ok50.gz.short with <:perlio:gzip ok 291 ok 292 - should be end of file ok 293 - close should fail ok 294 - open ok54.gz.len with <:perlio:gzip ok 295 ok 296 - should be end of file ok 297 - close should fail ok 298 - open ok58.gz.crc with <:perlio:gzip ok 299 ok 300 - should be end of file ok 301 - close should fail ok t/write.t .. 1..260 ok 1 - open foo as >:gzip ok 2 - close it straight away ok 3 - empty gzip file should be 20 bytes ok 4 - open foo as >:gzip ok 5 - print to it ok 6 - close it ok 7 - open foo for reading ok 8 - check we get same thing back ok 9 - should be end of file ok 10 - close it ok 11 - open foo as >:gzip(autopop) ok 12 - print to it ok 13 - close it ok 14 - open foo for reading [just '<'] ok 15 - check we get same thing back ok 16 - should be end of file ok 17 - close it ok 18 - open >:gzip [about to write 75516 bytes] ok 19 - print contents of /bin/sh ok 20 - close it ok 21 - open <:gzip ok 22 - compare compressed copy with '/bin/sh' ok 23 - should be end of file ok 24 - close it ok 25 - open empty as >:gzip(lazy) ok 26 - close it ok 27 - check it is zero length ok 28 - open foo as >:gzip(lazy) ok 29 - print to it ok 30 - print to it with $\ set ok 31 - close it ok 32 - open foo for reading ok 33 - check we get message back ok 34 - check we get message2 back ok 35 - should be end of file ok 36 - close it ok 37 - open foo as >:gzip(none) ok 38 - print to it ok 39 - close it ok 40 - no header, so open <:gzip should fail ok 41 - open foo for reading ok 42 - check we get same thing back ok 43 - should be end of file ok 44 - close it ok 45 - open +<:gzip should fail, as read/write unsupported ok 46 - check file empty was not created ok 47 - open +>:gzip should fail, as read/write unsupported not ok 48 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 49 - open +< ok 50 - binmode ':gzip' should fail on read/write ok 51 - close it ok 52 - open +> ok 53 - binmode ':gzip' should fail on read/write ok 54 - close it ok 55 - open foo as > ok 56 - print to it ok 57 - binmode ':gzip(none)' ok 58 - print to it ok 59 - close it ok 60 - open foo as < ok 61 - check we get uncompressed message ok 62 - binmode ':gzip(none)' ok 63 - check we get compressed message ok 64 - should be end of file ok 65 - close it ok 66 - open foo as >:unix:gzip ok 67 - close it straight away ok 68 - empty gzip file should be 20 bytes ok 69 - open foo as >:unix:gzip ok 70 - print to it ok 71 - close it ok 72 - open foo for reading ok 73 - check we get same thing back ok 74 - should be end of file ok 75 - close it ok 76 - open foo as >:unix:gzip(autopop) ok 77 - print to it ok 78 - close it ok 79 - open foo for reading [just '<'] ok 80 - check we get same thing back ok 81 - should be end of file ok 82 - close it ok 83 - open >:unix:gzip [about to write 75516 bytes] ok 84 - print contents of /bin/sh ok 85 - close it ok 86 - open <:unix:gzip ok 87 - compare compressed copy with '/bin/sh' ok 88 - should be end of file ok 89 - close it ok 90 - open empty as >:unix:gzip(lazy) ok 91 - close it ok 92 - check it is zero length ok 93 - open foo as >:unix:gzip(lazy) ok 94 - print to it ok 95 - print to it with $\ set ok 96 - close it ok 97 - open foo for reading ok 98 - check we get message back ok 99 - check we get message2 back ok 100 - should be end of file ok 101 - close it ok 102 - open foo as >:unix:gzip(none) ok 103 - print to it ok 104 - close it ok 105 - no header, so open <:unix:gzip should fail ok 106 - open foo for reading ok 107 - check we get same thing back ok 108 - should be end of file ok 109 - close it ok 110 - open +<:unix:gzip should fail, as read/write unsupported ok 111 - check file empty was not created ok 112 - open +>:unix:gzip should fail, as read/write unsupported not ok 113 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 114 - open +<:unix ok 115 - binmode ':gzip' should fail on read/write ok 116 - close it ok 117 - open +>:unix ok 118 - binmode ':gzip' should fail on read/write ok 119 - close it ok 120 - open foo as >:unix ok 121 - print to it ok 122 - binmode ':gzip(none)' ok 123 - print to it ok 124 - close it ok 125 - open foo as <:unix ok 126 - check we get uncompressed message ok 127 - binmode ':gzip(none)' ok 128 - check we get compressed message ok 129 - should be end of file ok 130 - close it ok 131 - open foo as >:stdio:gzip ok 132 - close it straight away ok 133 - empty gzip file should be 20 bytes ok 134 - open foo as >:stdio:gzip ok 135 - print to it ok 136 - close it ok 137 - open foo for reading ok 138 - check we get same thing back ok 139 - should be end of file ok 140 - close it ok 141 - open foo as >:stdio:gzip(autopop) ok 142 - print to it ok 143 - close it ok 144 - open foo for reading [just '<'] ok 145 - check we get same thing back ok 146 - should be end of file ok 147 - close it ok 148 - open >:stdio:gzip [about to write 75516 bytes] ok 149 - print contents of /bin/sh ok 150 - close it ok 151 - open <:stdio:gzip ok 152 - compare compressed copy with '/bin/sh' ok 153 - should be end of file ok 154 - close it ok 155 - open empty as >:stdio:gzip(lazy) ok 156 - close it ok 157 - check it is zero length ok 158 - open foo as >:stdio:gzip(lazy) ok 159 - print to it ok 160 - print to it with $\ set ok 161 - close it ok 162 - open foo for reading ok 163 - check we get message back ok 164 - check we get message2 back ok 165 - should be end of file ok 166 - close it ok 167 - open foo as >:stdio:gzip(none) ok 168 - print to it ok 169 - close it ok 170 - no header, so open <:stdio:gzip should fail ok 171 - open foo for reading ok 172 - check we get same thing back ok 173 - should be end of file ok 174 - close it ok 175 - open +<:stdio:gzip should fail, as read/write unsupported ok 176 - check file empty was not created ok 177 - open +>:stdio:gzip should fail, as read/write unsupported not ok 178 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 179 - open +<:stdio ok 180 - binmode ':gzip' should fail on read/write ok 181 - close it ok 182 - open +>:stdio ok 183 - binmode ':gzip' should fail on read/write ok 184 - close it ok 185 - open foo as >:stdio ok 186 - print to it ok 187 - binmode ':gzip(none)' ok 188 - print to it ok 189 - close it ok 190 - open foo as <:stdio ok 191 - check we get uncompressed message ok 192 - binmode ':gzip(none)' ok 193 - check we get compressed message ok 194 - should be end of file ok 195 - close it ok 196 - open foo as >:perlio:gzip ok 197 - close it straight away ok 198 - empty gzip file should be 20 bytes ok 199 - open foo as >:perlio:gzip ok 200 - print to it ok 201 - close it ok 202 - open foo for reading ok 203 - check we get same thing back ok 204 - should be end of file ok 205 - close it ok 206 - open foo as >:perlio:gzip(autopop) ok 207 - print to it ok 208 - close it ok 209 - open foo for reading [just '<'] ok 210 - check we get same thing back ok 211 - should be end of file ok 212 - close it ok 213 - open >:perlio:gzip [about to write 75516 bytes] ok 214 - print contents of /bin/sh ok 215 - close it ok 216 - open <:perlio:gzip ok 217 - compare compressed copy with '/bin/sh' ok 218 - should be end of file ok 219 - close it ok 220 - open empty as >:perlio:gzip(lazy) ok 221 - close it ok 222 - check it is zero length ok 223 - open foo as >:perlio:gzip(lazy) ok 224 - print to it ok 225 - print to it with $\ set ok 226 - close it ok 227 - open foo for reading ok 228 - check we get message back ok 229 - check we get message2 back ok 230 - should be end of file ok 231 - close it ok 232 - open foo as >:perlio:gzip(none) ok 233 - print to it ok 234 - close it ok 235 - no header, so open <:perlio:gzip should fail ok 236 - open foo for reading ok 237 - check we get same thing back ok 238 - should be end of file ok 239 - close it ok 240 - open +<:perlio:gzip should fail, as read/write unsupported ok 241 - check file empty was not created ok 242 - open +>:perlio:gzip should fail, as read/write unsupported not ok 243 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 244 - open +<:perlio ok 245 - binmode ':gzip' should fail on read/write ok 246 - close it ok 247 - open +>:perlio ok 248 - binmode ':gzip' should fail on read/write ok 249 - close it ok 250 - open foo as >:perlio ok 251 - print to it ok 252 - binmode ':gzip(none)' ok 253 - print to it ok 254 - close it ok 255 - open foo as <:perlio ok 256 - check we get uncompressed message ok 257 - binmode ':gzip(none)' ok 258 - check we get compressed message ok 259 - should be end of file ok 260 - close it ok All tests successful. Files=2, Tests=561, 5 wallclock secs ( 0.59 usr 0.05 sys + 3.23 cusr 0.31 csys = 4.18 CPU) Result: PASS make[1]: Leaving directory '/build/libperlio-gzip-perl-0.19' fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install make -j1 install DESTDIR=/build/libperlio-gzip-perl-0.19/debian/libperlio-gzip-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/libperlio-gzip-perl-0.19' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/libperlio-gzip-perl-0.19/debian/libperlio-gzip-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/auto/PerlIO/gzip/gzip.so Installing /build/libperlio-gzip-perl-0.19/debian/libperlio-gzip-perl/usr/lib/arm-linux-gnueabihf/perl5/5.28/PerlIO/gzip.pm Installing /build/libperlio-gzip-perl-0.19/debian/libperlio-gzip-perl/usr/share/man/man3/PerlIO::gzip.3pm make[1]: Leaving directory '/build/libperlio-gzip-perl-0.19' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_strip dh_makeshlibs dh_shlibdeps dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libperlio-gzip-perl' in '../libperlio-gzip-perl_0.19-1_armhf.deb'. dpkg-deb: building package 'libperlio-gzip-perl-dbgsym' in '../libperlio-gzip-perl-dbgsym_0.19-1_armhf.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libperlio-gzip-perl_0.19-1_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/16819 and its subdirectories I: Current time: Tue Sep 22 14:27:29 -12 2020 I: pbuilder-time-stamp: 1600828049