I: pbuilder: network access will be disabled during build I: Current time: Fri May 22 13:45:56 -12 2020 I: pbuilder-time-stamp: 1590198356 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [naspro-bridges_0.5.1-2.dsc] I: copying [./naspro-bridges_0.5.1.orig.tar.bz2] I: copying [./naspro-bridges_0.5.1-2.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Mon Feb 15 23:20:18 2016 -12 gpgv: using RSA key E8A48AE5311D765A gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./naspro-bridges_0.5.1-2.dsc dpkg-source: info: extracting naspro-bridges in naspro-bridges-0.5.1 dpkg-source: info: unpacking naspro-bridges_0.5.1.orig.tar.bz2 dpkg-source: info: unpacking naspro-bridges_0.5.1-2.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 7.0.50~), dh-autoreconf, dssi-dev, ladspa-sdk, libasound2-dev, libnabrit-dev (>> 0.5.0), libnacore-dev (>> 0.5.0), librdf0-dev, lv2-dev, pkg-config dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 7.0.50~); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on dh-autoreconf; however: Package dh-autoreconf is not installed. pbuilder-satisfydepends-dummy depends on dssi-dev; however: Package dssi-dev is not installed. pbuilder-satisfydepends-dummy depends on ladspa-sdk; however: Package ladspa-sdk is not installed. pbuilder-satisfydepends-dummy depends on libasound2-dev; however: Package libasound2-dev is not installed. pbuilder-satisfydepends-dummy depends on libnabrit-dev (>> 0.5.0); however: Package libnabrit-dev is not installed. pbuilder-satisfydepends-dummy depends on libnacore-dev (>> 0.5.0); however: Package libnacore-dev is not installed. pbuilder-satisfydepends-dummy depends on librdf0-dev; however: Package librdf0-dev is not installed. pbuilder-satisfydepends-dummy depends on lv2-dev; however: Package lv2-dev is not installed. pbuilder-satisfydepends-dummy depends on pkg-config; however: Package pkg-config is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dssi-dev{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} icu-devtools{a} intltool-debian{a} ladspa-sdk{a} libarchive-zip-perl{a} libasound2{a} libasound2-data{a} libasound2-dev{a} libbsd0{a} libcroco3{a} libcurl3-gnutls{a} libcurl4-gnutls-dev{a} libelf1{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libgmp-dev{a} libgmpxx4ldbl{a} libgssapi-krb5-2{a} libicu-dev{a} libicu63{a} libk5crypto3{a} libkeyutils1{a} libkrb5-3{a} libkrb5support0{a} libldap-2.4-2{a} libldap-common{a} libltdl7{a} libmagic-mgc{a} libmagic1{a} libmhash2{a} libnabrit-dev{a} libnabrit3{a} libnacore-dev{a} libnacore5{a} libncurses6{a} libnghttp2-14{a} libpipeline1{a} libpsl5{a} libraptor2-0{a} libraptor2-dev{a} librasqal3{a} librasqal3-dev{a} librdf0{a} librdf0-dev{a} librtmp1{a} libsasl2-2{a} libsasl2-modules-db{a} libsigsegv2{a} libssh2-1{a} libssl1.1{a} libtool{a} libuchardet0{a} libxml2{a} libxml2-dev{a} libxslt1-dev{a} libxslt1.1{a} libyajl-dev{a} libyajl2{a} lv2-dev{a} m4{a} man-db{a} pkg-config{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl krb5-locales libarchive-cpio-perl libglib2.0-data libgpm2 libltdl-dev libmail-sendmail-perl libsasl2-modules lynx publicsuffix raptor2-utils rasqal-utils redland-utils shared-mime-info wget xdg-user-dirs 0 packages upgraded, 77 newly installed, 0 to remove and 0 not upgraded. Need to get 35.1 MB of archives. After unpacking 125 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main armhf libbsd0 armhf 0.9.1-2 [103 kB] Get: 2 http://deb.debian.org/debian buster/main armhf bsdmainutils armhf 11.1.2+b1 [186 kB] Get: 3 http://deb.debian.org/debian buster/main armhf libuchardet0 armhf 0.0.6-3 [62.2 kB] Get: 4 http://deb.debian.org/debian buster/main armhf groff-base armhf 1.22.4-3 [828 kB] Get: 5 http://deb.debian.org/debian buster/main armhf libpipeline1 armhf 1.5.1-2 [26.8 kB] Get: 6 http://deb.debian.org/debian buster/main armhf man-db armhf 2.8.5-2 [1240 kB] Get: 7 http://deb.debian.org/debian buster/main armhf sensible-utils all 0.0.12 [15.8 kB] Get: 8 http://deb.debian.org/debian buster/main armhf libmagic-mgc armhf 1:5.35-4+deb10u1 [242 kB] Get: 9 http://deb.debian.org/debian buster/main armhf libmagic1 armhf 1:5.35-4+deb10u1 [110 kB] Get: 10 http://deb.debian.org/debian buster/main armhf file armhf 1:5.35-4+deb10u1 [65.5 kB] Get: 11 http://deb.debian.org/debian buster/main armhf gettext-base armhf 0.19.8.1-9 [118 kB] Get: 12 http://deb.debian.org/debian buster/main armhf libsigsegv2 armhf 2.12-2 [32.1 kB] Get: 13 http://deb.debian.org/debian buster/main armhf m4 armhf 1.4.18-2 [190 kB] Get: 14 http://deb.debian.org/debian buster/main armhf autoconf all 2.69-11 [341 kB] Get: 15 http://deb.debian.org/debian buster/main armhf autotools-dev all 20180224.1 [77.0 kB] Get: 16 http://deb.debian.org/debian buster/main armhf automake all 1:1.16.1-4 [771 kB] Get: 17 http://deb.debian.org/debian buster/main armhf autopoint all 0.19.8.1-9 [434 kB] Get: 18 http://deb.debian.org/debian buster/main armhf libtool all 2.4.6-9 [547 kB] Get: 19 http://deb.debian.org/debian buster/main armhf dh-autoreconf all 19 [16.9 kB] Get: 20 http://deb.debian.org/debian buster/main armhf libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 21 http://deb.debian.org/debian buster/main armhf libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 22 http://deb.debian.org/debian buster/main armhf dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 23 http://deb.debian.org/debian buster/main armhf libelf1 armhf 0.176-1.1 [158 kB] Get: 24 http://deb.debian.org/debian buster/main armhf dwz armhf 0.12-3 [72.0 kB] Get: 25 http://deb.debian.org/debian buster/main armhf libglib2.0-0 armhf 2.58.3-2+deb10u2 [1101 kB] Get: 26 http://deb.debian.org/debian buster/main armhf libicu63 armhf 63.1-6+deb10u1 [8005 kB] Get: 27 http://deb.debian.org/debian buster/main armhf libxml2 armhf 2.9.4+dfsg1-7+b3 [595 kB] Get: 28 http://deb.debian.org/debian buster/main armhf libcroco3 armhf 0.6.12-3 [133 kB] Get: 29 http://deb.debian.org/debian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [79.8 kB] Get: 30 http://deb.debian.org/debian buster/main armhf gettext armhf 0.19.8.1-9 [1242 kB] Get: 31 http://deb.debian.org/debian buster/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 32 http://deb.debian.org/debian buster/main armhf po-debconf all 1.0.21 [248 kB] Get: 33 http://deb.debian.org/debian buster/main armhf debhelper all 12.1.1 [1016 kB] Get: 34 http://deb.debian.org/debian buster/main armhf ladspa-sdk armhf 1.13-3 [34.8 kB] Get: 35 http://deb.debian.org/debian buster/main armhf libasound2-data all 1.1.8-1 [59.6 kB] Get: 36 http://deb.debian.org/debian buster/main armhf libasound2 armhf 1.1.8-1 [310 kB] Get: 37 http://deb.debian.org/debian buster/main armhf libasound2-dev armhf 1.1.8-1 [145 kB] Get: 38 http://deb.debian.org/debian buster/main armhf pkg-config armhf 0.29-6 [60.7 kB] Get: 39 http://deb.debian.org/debian buster/main armhf dssi-dev all 1.1.1~dfsg0-1 [28.4 kB] Get: 40 http://deb.debian.org/debian buster/main armhf icu-devtools armhf 63.1-6+deb10u1 [168 kB] Get: 41 http://deb.debian.org/debian buster/main armhf libkeyutils1 armhf 1.6-6 [13.9 kB] Get: 42 http://deb.debian.org/debian buster/main armhf libkrb5support0 armhf 1.17-3 [62.3 kB] Get: 43 http://deb.debian.org/debian buster/main armhf libk5crypto3 armhf 1.17-3 [119 kB] Get: 44 http://deb.debian.org/debian buster/main armhf libssl1.1 armhf 1.1.1d-0+deb10u3 [1299 kB] Get: 45 http://deb.debian.org/debian buster/main armhf libkrb5-3 armhf 1.17-3 [323 kB] Get: 46 http://deb.debian.org/debian buster/main armhf libgssapi-krb5-2 armhf 1.17-3 [137 kB] Get: 47 http://deb.debian.org/debian buster/main armhf libsasl2-modules-db armhf 2.1.27+dfsg-1+deb10u1 [67.4 kB] Get: 48 http://deb.debian.org/debian buster/main armhf libsasl2-2 armhf 2.1.27+dfsg-1+deb10u1 [98.9 kB] Get: 49 http://deb.debian.org/debian buster/main armhf libldap-common all 2.4.47+dfsg-3+deb10u2 [89.7 kB] Get: 50 http://deb.debian.org/debian buster/main armhf libldap-2.4-2 armhf 2.4.47+dfsg-3+deb10u2 [202 kB] Get: 51 http://deb.debian.org/debian buster/main armhf libnghttp2-14 armhf 1.36.0-2+deb10u1 [74.4 kB] Get: 52 http://deb.debian.org/debian buster/main armhf libpsl5 armhf 0.20.2-2 [52.4 kB] Get: 53 http://deb.debian.org/debian buster/main armhf librtmp1 armhf 2.4+20151223.gitfa8646d.1-2 [54.9 kB] Get: 54 http://deb.debian.org/debian buster/main armhf libssh2-1 armhf 1.8.0-2.1 [129 kB] Get: 55 http://deb.debian.org/debian buster/main armhf libcurl3-gnutls armhf 7.64.0-4+deb10u1 [295 kB] Get: 56 http://deb.debian.org/debian buster/main armhf libcurl4-gnutls-dev armhf 7.64.0-4+deb10u1 [389 kB] Get: 57 http://deb.debian.org/debian buster/main armhf libgmpxx4ldbl armhf 2:6.1.2+dfsg-4 [21.7 kB] Get: 58 http://deb.debian.org/debian buster/main armhf libgmp-dev armhf 2:6.1.2+dfsg-4 [581 kB] Get: 59 http://deb.debian.org/debian buster/main armhf libicu-dev armhf 63.1-6+deb10u1 [8940 kB] Get: 60 http://deb.debian.org/debian buster/main armhf libltdl7 armhf 2.4.6-9 [387 kB] Get: 61 http://deb.debian.org/debian buster/main armhf libmhash2 armhf 0.9.9.9-7+b1 [115 kB] Get: 62 http://deb.debian.org/debian buster/main armhf libnacore5 armhf 0.5.1-3 [20.6 kB] Get: 63 http://deb.debian.org/debian buster/main armhf libnabrit3 armhf 0.5.1-2 [10.1 kB] Get: 64 http://deb.debian.org/debian buster/main armhf lv2-dev armhf 1.14.0~dfsg1-2 [110 kB] Get: 65 http://deb.debian.org/debian buster/main armhf libnacore-dev armhf 0.5.1-3 [20.5 kB] Get: 66 http://deb.debian.org/debian buster/main armhf libnabrit-dev armhf 0.5.1-2 [9184 B] Get: 67 http://deb.debian.org/debian buster/main armhf libxslt1.1 armhf 1.1.32-2.2~deb10u1 [217 kB] Get: 68 http://deb.debian.org/debian buster/main armhf libyajl2 armhf 2.1.0-3 [20.9 kB] Get: 69 http://deb.debian.org/debian buster/main armhf libraptor2-0 armhf 2.0.14-1+b1 [140 kB] Get: 70 http://deb.debian.org/debian buster/main armhf libxml2-dev armhf 2.9.4+dfsg1-7+b3 [718 kB] Get: 71 http://deb.debian.org/debian buster/main armhf libxslt1-dev armhf 1.1.32-2.2~deb10u1 [507 kB] Get: 72 http://deb.debian.org/debian buster/main armhf libyajl-dev armhf 2.1.0-3 [29.7 kB] Get: 73 http://deb.debian.org/debian buster/main armhf libraptor2-dev armhf 2.0.14-1+b1 [186 kB] Get: 74 http://deb.debian.org/debian buster/main armhf librasqal3 armhf 0.9.32-1+b1 [151 kB] Get: 75 http://deb.debian.org/debian buster/main armhf librasqal3-dev armhf 0.9.32-1+b1 [191 kB] Get: 76 http://deb.debian.org/debian buster/main armhf librdf0 armhf 1.0.17-1.1+b1 [95.1 kB] Get: 77 http://deb.debian.org/debian buster/main armhf librdf0-dev armhf 1.0.17-1.1+b1 [232 kB] Fetched 35.1 MB in 5s (6497 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_armhf.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../02-libuchardet0_0.0.6-3_armhf.deb ... Unpacking libuchardet0:armhf (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_armhf.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../04-libpipeline1_1.5.1-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_armhf.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../06-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../07-libmagic-mgc_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../08-libmagic1_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic1:armhf (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../09-file_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../10-gettext-base_0.19.8.1-9_armhf.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../11-libsigsegv2_2.12-2_armhf.deb ... Unpacking libsigsegv2:armhf (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-2_armhf.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../22-libelf1_0.176-1.1_armhf.deb ... Unpacking libelf1:armhf (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.12-3_armhf.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../24-libglib2.0-0_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:armhf. Preparing to unpack .../25-libicu63_63.1-6+deb10u1_armhf.deb ... Unpacking libicu63:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../26-libxml2_2.9.4+dfsg1-7+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../27-libcroco3_0.6.12-3_armhf.deb ... Unpacking libcroco3:armhf (0.6.12-3) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../28-libncurses6_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.19.8.1-9_armhf.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package ladspa-sdk. Preparing to unpack .../33-ladspa-sdk_1.13-3_armhf.deb ... Unpacking ladspa-sdk (1.13-3) ... Selecting previously unselected package libasound2-data. Preparing to unpack .../34-libasound2-data_1.1.8-1_all.deb ... Unpacking libasound2-data (1.1.8-1) ... Selecting previously unselected package libasound2:armhf. Preparing to unpack .../35-libasound2_1.1.8-1_armhf.deb ... Unpacking libasound2:armhf (1.1.8-1) ... Selecting previously unselected package libasound2-dev:armhf. Preparing to unpack .../36-libasound2-dev_1.1.8-1_armhf.deb ... Unpacking libasound2-dev:armhf (1.1.8-1) ... Selecting previously unselected package pkg-config. Preparing to unpack .../37-pkg-config_0.29-6_armhf.deb ... Unpacking pkg-config (0.29-6) ... Selecting previously unselected package dssi-dev. Preparing to unpack .../38-dssi-dev_1.1.1~dfsg0-1_all.deb ... Unpacking dssi-dev (1.1.1~dfsg0-1) ... Selecting previously unselected package icu-devtools. Preparing to unpack .../39-icu-devtools_63.1-6+deb10u1_armhf.deb ... Unpacking icu-devtools (63.1-6+deb10u1) ... Selecting previously unselected package libkeyutils1:armhf. Preparing to unpack .../40-libkeyutils1_1.6-6_armhf.deb ... Unpacking libkeyutils1:armhf (1.6-6) ... Selecting previously unselected package libkrb5support0:armhf. Preparing to unpack .../41-libkrb5support0_1.17-3_armhf.deb ... Unpacking libkrb5support0:armhf (1.17-3) ... Selecting previously unselected package libk5crypto3:armhf. Preparing to unpack .../42-libk5crypto3_1.17-3_armhf.deb ... Unpacking libk5crypto3:armhf (1.17-3) ... Selecting previously unselected package libssl1.1:armhf. Preparing to unpack .../43-libssl1.1_1.1.1d-0+deb10u3_armhf.deb ... Unpacking libssl1.1:armhf (1.1.1d-0+deb10u3) ... Selecting previously unselected package libkrb5-3:armhf. Preparing to unpack .../44-libkrb5-3_1.17-3_armhf.deb ... Unpacking libkrb5-3:armhf (1.17-3) ... Selecting previously unselected package libgssapi-krb5-2:armhf. Preparing to unpack .../45-libgssapi-krb5-2_1.17-3_armhf.deb ... Unpacking libgssapi-krb5-2:armhf (1.17-3) ... Selecting previously unselected package libsasl2-modules-db:armhf. Preparing to unpack .../46-libsasl2-modules-db_2.1.27+dfsg-1+deb10u1_armhf.deb ... Unpacking libsasl2-modules-db:armhf (2.1.27+dfsg-1+deb10u1) ... Selecting previously unselected package libsasl2-2:armhf. Preparing to unpack .../47-libsasl2-2_2.1.27+dfsg-1+deb10u1_armhf.deb ... Unpacking libsasl2-2:armhf (2.1.27+dfsg-1+deb10u1) ... Selecting previously unselected package libldap-common. Preparing to unpack .../48-libldap-common_2.4.47+dfsg-3+deb10u2_all.deb ... Unpacking libldap-common (2.4.47+dfsg-3+deb10u2) ... Selecting previously unselected package libldap-2.4-2:armhf. Preparing to unpack .../49-libldap-2.4-2_2.4.47+dfsg-3+deb10u2_armhf.deb ... Unpacking libldap-2.4-2:armhf (2.4.47+dfsg-3+deb10u2) ... Selecting previously unselected package libnghttp2-14:armhf. Preparing to unpack .../50-libnghttp2-14_1.36.0-2+deb10u1_armhf.deb ... Unpacking libnghttp2-14:armhf (1.36.0-2+deb10u1) ... Selecting previously unselected package libpsl5:armhf. Preparing to unpack .../51-libpsl5_0.20.2-2_armhf.deb ... Unpacking libpsl5:armhf (0.20.2-2) ... Selecting previously unselected package librtmp1:armhf. Preparing to unpack .../52-librtmp1_2.4+20151223.gitfa8646d.1-2_armhf.deb ... Unpacking librtmp1:armhf (2.4+20151223.gitfa8646d.1-2) ... Selecting previously unselected package libssh2-1:armhf. Preparing to unpack .../53-libssh2-1_1.8.0-2.1_armhf.deb ... Unpacking libssh2-1:armhf (1.8.0-2.1) ... Selecting previously unselected package libcurl3-gnutls:armhf. Preparing to unpack .../54-libcurl3-gnutls_7.64.0-4+deb10u1_armhf.deb ... Unpacking libcurl3-gnutls:armhf (7.64.0-4+deb10u1) ... Selecting previously unselected package libcurl4-gnutls-dev:armhf. Preparing to unpack .../55-libcurl4-gnutls-dev_7.64.0-4+deb10u1_armhf.deb ... Unpacking libcurl4-gnutls-dev:armhf (7.64.0-4+deb10u1) ... Selecting previously unselected package libgmpxx4ldbl:armhf. Preparing to unpack .../56-libgmpxx4ldbl_2%3a6.1.2+dfsg-4_armhf.deb ... Unpacking libgmpxx4ldbl:armhf (2:6.1.2+dfsg-4) ... Selecting previously unselected package libgmp-dev:armhf. Preparing to unpack .../57-libgmp-dev_2%3a6.1.2+dfsg-4_armhf.deb ... Unpacking libgmp-dev:armhf (2:6.1.2+dfsg-4) ... Selecting previously unselected package libicu-dev:armhf. Preparing to unpack .../58-libicu-dev_63.1-6+deb10u1_armhf.deb ... Unpacking libicu-dev:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libltdl7:armhf. Preparing to unpack .../59-libltdl7_2.4.6-9_armhf.deb ... Unpacking libltdl7:armhf (2.4.6-9) ... Selecting previously unselected package libmhash2:armhf. Preparing to unpack .../60-libmhash2_0.9.9.9-7+b1_armhf.deb ... Unpacking libmhash2:armhf (0.9.9.9-7+b1) ... Selecting previously unselected package libnacore5:armhf. Preparing to unpack .../61-libnacore5_0.5.1-3_armhf.deb ... Unpacking libnacore5:armhf (0.5.1-3) ... Selecting previously unselected package libnabrit3:armhf. Preparing to unpack .../62-libnabrit3_0.5.1-2_armhf.deb ... Unpacking libnabrit3:armhf (0.5.1-2) ... Selecting previously unselected package lv2-dev. Preparing to unpack .../63-lv2-dev_1.14.0~dfsg1-2_armhf.deb ... Unpacking lv2-dev (1.14.0~dfsg1-2) ... Selecting previously unselected package libnacore-dev:armhf. Preparing to unpack .../64-libnacore-dev_0.5.1-3_armhf.deb ... Unpacking libnacore-dev:armhf (0.5.1-3) ... Selecting previously unselected package libnabrit-dev:armhf. Preparing to unpack .../65-libnabrit-dev_0.5.1-2_armhf.deb ... Unpacking libnabrit-dev:armhf (0.5.1-2) ... Selecting previously unselected package libxslt1.1:armhf. Preparing to unpack .../66-libxslt1.1_1.1.32-2.2~deb10u1_armhf.deb ... Unpacking libxslt1.1:armhf (1.1.32-2.2~deb10u1) ... Selecting previously unselected package libyajl2:armhf. Preparing to unpack .../67-libyajl2_2.1.0-3_armhf.deb ... Unpacking libyajl2:armhf (2.1.0-3) ... Selecting previously unselected package libraptor2-0:armhf. Preparing to unpack .../68-libraptor2-0_2.0.14-1+b1_armhf.deb ... Unpacking libraptor2-0:armhf (2.0.14-1+b1) ... Selecting previously unselected package libxml2-dev:armhf. Preparing to unpack .../69-libxml2-dev_2.9.4+dfsg1-7+b3_armhf.deb ... Unpacking libxml2-dev:armhf (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libxslt1-dev:armhf. Preparing to unpack .../70-libxslt1-dev_1.1.32-2.2~deb10u1_armhf.deb ... Unpacking libxslt1-dev:armhf (1.1.32-2.2~deb10u1) ... Selecting previously unselected package libyajl-dev:armhf. Preparing to unpack .../71-libyajl-dev_2.1.0-3_armhf.deb ... Unpacking libyajl-dev:armhf (2.1.0-3) ... Selecting previously unselected package libraptor2-dev. Preparing to unpack .../72-libraptor2-dev_2.0.14-1+b1_armhf.deb ... Unpacking libraptor2-dev (2.0.14-1+b1) ... Selecting previously unselected package librasqal3:armhf. Preparing to unpack .../73-librasqal3_0.9.32-1+b1_armhf.deb ... Unpacking librasqal3:armhf (0.9.32-1+b1) ... Selecting previously unselected package librasqal3-dev. Preparing to unpack .../74-librasqal3-dev_0.9.32-1+b1_armhf.deb ... Unpacking librasqal3-dev (0.9.32-1+b1) ... Selecting previously unselected package librdf0:armhf. Preparing to unpack .../75-librdf0_1.0.17-1.1+b1_armhf.deb ... Unpacking librdf0:armhf (1.0.17-1.1+b1) ... Selecting previously unselected package librdf0-dev. Preparing to unpack .../76-librdf0-dev_1.0.17-1.1+b1_armhf.deb ... Unpacking librdf0-dev (1.0.17-1.1+b1) ... Setting up libnacore5:armhf (0.5.1-3) ... Setting up libpipeline1:armhf (1.5.1-2) ... Setting up ladspa-sdk (1.13-3) ... Setting up libkeyutils1:armhf (1.6-6) ... Setting up libpsl5:armhf (0.20.2-2) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:armhf (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libssl1.1:armhf (1.1.1d-0+deb10u3) ... Setting up libyajl2:armhf (2.1.0-3) ... Setting up libnghttp2-14:armhf (1.36.0-2+deb10u1) ... Setting up libmagic1:armhf (1:5.35-4+deb10u1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libldap-common (2.4.47+dfsg-3+deb10u2) ... Setting up libicu63:armhf (63.1-6+deb10u1) ... Setting up libkrb5support0:armhf (1.17-3) ... Setting up libsasl2-modules-db:armhf (2.1.27+dfsg-1+deb10u1) ... Setting up libasound2-data (1.1.8-1) ... Setting up autotools-dev (20180224.1) ... Setting up libnabrit3:armhf (0.5.1-2) ... Setting up libgmpxx4ldbl:armhf (2:6.1.2+dfsg-4) ... Setting up librtmp1:armhf (2.4+20151223.gitfa8646d.1-2) ... Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:armhf (2.12-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up icu-devtools (63.1-6+deb10u1) ... Setting up pkg-config (0.29-6) ... Setting up libk5crypto3:armhf (1.17-3) ... Setting up libltdl7:armhf (2.4.6-9) ... Setting up libsasl2-2:armhf (2.1.27+dfsg-1+deb10u1) ... Setting up libmhash2:armhf (0.9.9.9-7+b1) ... Setting up libyajl-dev:armhf (2.1.0-3) ... Setting up sensible-utils (0.0.12) ... Setting up lv2-dev (1.14.0~dfsg1-2) ... Setting up libuchardet0:armhf (0.0.6-3) ... Setting up libasound2:armhf (1.1.8-1) ... Setting up libssh2-1:armhf (1.8.0-2.1) ... Setting up libkrb5-3:armhf (1.17-3) ... Setting up libasound2-dev:armhf (1.1.8-1) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up libelf1:armhf (0.176-1.1) ... Setting up libicu-dev:armhf (63.1-6+deb10u1) ... Setting up libxml2:armhf (2.9.4+dfsg1-7+b3) ... Setting up libnacore-dev:armhf (0.5.1-3) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libgmp-dev:armhf (2:6.1.2+dfsg-4) ... Setting up libtool (2.4.6-9) ... Setting up libldap-2.4-2:armhf (2.4.47+dfsg-3+deb10u2) ... Setting up m4 (1.4.18-2) ... Setting up libxml2-dev:armhf (2.9.4+dfsg1-7+b3) ... Setting up libnabrit-dev:armhf (0.5.1-2) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libgssapi-krb5-2:armhf (1.17-3) ... Setting up dssi-dev (1.1.1~dfsg0-1) ... Setting up libcroco3:armhf (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up libxslt1.1:armhf (1.1.32-2.2~deb10u1) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up gettext (0.19.8.1-9) ... Setting up libxslt1-dev:armhf (1.1.32-2.2~deb10u1) ... Setting up libcurl3-gnutls:armhf (7.64.0-4+deb10u1) ... Setting up libcurl4-gnutls-dev:armhf (7.64.0-4+deb10u1) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up po-debconf (1.0.21) ... Setting up libraptor2-0:armhf (2.0.14-1+b1) ... Setting up libraptor2-dev (2.0.14-1+b1) ... Setting up librasqal3:armhf (0.9.32-1+b1) ... Setting up librasqal3-dev (0.9.32-1+b1) ... Setting up librdf0:armhf (1.0.17-1.1+b1) ... Setting up librdf0-dev (1.0.17-1.1+b1) ... Setting up dh-autoreconf (19) ... Setting up debhelper (12.1.1) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/naspro-bridges-0.5.1/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package naspro-bridges dpkg-buildpackage: info: source version 0.5.1-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Alessio Treglia dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean --parallel --with autoreconf dh: Compatibility levels before 9 are deprecated (level 7 in use) debian/rules override_dh_auto_clean make[1]: Entering directory '/build/naspro-bridges-0.5.1' rm -rf m4 dh_auto_clean dh_auto_clean: Compatibility levels before 9 are deprecated (level 7 in use) make[1]: Leaving directory '/build/naspro-bridges-0.5.1' dh_autoreconf_clean -O--parallel dh_clean -O--parallel dh_clean: Compatibility levels before 9 are deprecated (level 7 in use) debian/rules build dh build --parallel --with autoreconf dh: Compatibility levels before 9 are deprecated (level 7 in use) dh_update_autotools_config -O--parallel debian/rules override_dh_autoreconf make[1]: Entering directory '/build/naspro-bridges-0.5.1' mkdir m4 dh_autoreconf libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:31: installing './compile' configure.ac:19: installing './missing' dssi/Makefile.am: installing './depcomp' make[1]: Leaving directory '/build/naspro-bridges-0.5.1' dh_auto_configure -O--parallel dh_auto_configure: Compatibility levels before 9 are deprecated (level 7 in use) ./configure --build=arm-linux-gnueabihf --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-silent-rules --libexecdir=\${prefix}/lib/naspro-bridges --disable-maintainer-mode --disable-dependency-tracking configure: WARNING: unrecognized options: --disable-maintainer-mode checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking where to put LV2 bundles... ${exec_prefix}/lib/lv2 checking whether make supports the include directive... yes (GNU style) checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... none checking for gcc option to accept ISO C99... none needed checking build system type... arm-unknown-linux-gnueabihf checking host system type... arm-unknown-linux-gnueabihf checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert arm-unknown-linux-gnueabihf file names to arm-unknown-linux-gnueabihf format... func_convert_file_noop checking how to convert arm-unknown-linux-gnueabihf file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... dlltool checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for NABRIT... yes checking ladspa.h usability... yes checking ladspa.h presence... yes checking for ladspa.h... yes checking whether LRDF-equivalent LV2 bundles should be installed... yes checking for DSSI... yes checking for ALSA... yes checking whether to enable bridging of DSSI programs as LV2 presets... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating ladspa/manifest.ttl config.status: creating ladspa/Makefile config.status: creating ladspa/data/Makefile config.status: creating dssi/manifest.ttl config.status: creating dssi/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-maintainer-mode configure: LADSPA bridge: yes configure: LRDF-equivalent bundles: yes configure: DSSI bridge: yes configure: DSSI programs as LV2 presets: yes dh_auto_build -O--parallel dh_auto_build: Compatibility levels before 9 are deprecated (level 7 in use) make -j3 make[1]: Entering directory '/build/naspro-bridges-0.5.1' make all-recursive make[2]: Entering directory '/build/naspro-bridges-0.5.1' Making all in ladspa make[3]: Entering directory '/build/naspro-bridges-0.5.1/ladspa' Making all in data make[4]: Entering directory '/build/naspro-bridges-0.5.1/ladspa/data' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/naspro-bridges-0.5.1/ladspa/data' make[4]: Entering directory '/build/naspro-bridges-0.5.1/ladspa' /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -pedantic -Wall -Werror -Wno-strict-aliasing -pthread -I/usr/include/NASPRO/brit-3 -I/usr/include/NASPRO/core-5 -g -O2 -c -o manifest.lo manifest.c /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -pedantic -Wall -Werror -Wno-strict-aliasing -pthread -I/usr/include/NASPRO/brit-3 -I/usr/include/NASPRO/core-5 -g -O2 -c -o bridge.lo bridge.c /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -pedantic -Wall -Werror -Wno-strict-aliasing -pthread -I/usr/include/NASPRO/brit-3 -I/usr/include/NASPRO/core-5 -g -O2 -c -o pluglib.lo pluglib.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -pedantic -Wall -Werror -Wno-strict-aliasing -pthread -I/usr/include/NASPRO/brit-3 -I/usr/include/NASPRO/core-5 -g -O2 -c bridge.c -fPIC -DPIC -o .libs/bridge.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -pedantic -Wall -Werror -Wno-strict-aliasing -pthread -I/usr/include/NASPRO/brit-3 -I/usr/include/NASPRO/core-5 -g -O2 -c manifest.c -fPIC -DPIC -o .libs/manifest.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -pedantic -Wall -Werror -Wno-strict-aliasing -pthread -I/usr/include/NASPRO/brit-3 -I/usr/include/NASPRO/core-5 -g -O2 -c pluglib.c -fPIC -DPIC -o .libs/pluglib.o /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -pedantic -Wall -Werror -Wno-strict-aliasing -pthread -I/usr/include/NASPRO/brit-3 -I/usr/include/NASPRO/core-5 -g -O2 -c -o plugin.lo plugin.c /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -pedantic -Wall -Werror -Wno-strict-aliasing -pthread -I/usr/include/NASPRO/brit-3 -I/usr/include/NASPRO/core-5 -g -O2 -c -o lv2api.lo lv2api.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -pedantic -Wall -Werror -Wno-strict-aliasing -pthread -I/usr/include/NASPRO/brit-3 -I/usr/include/NASPRO/core-5 -g -O2 -c plugin.c -fPIC -DPIC -o .libs/plugin.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -pedantic -Wall -Werror -Wno-strict-aliasing -pthread -I/usr/include/NASPRO/brit-3 -I/usr/include/NASPRO/core-5 -g -O2 -c lv2api.c -fPIC -DPIC -o .libs/lv2api.o /bin/bash ../libtool --tag=CC --mode=link gcc -pedantic -Wall -Werror -Wno-strict-aliasing -pthread -I/usr/include/NASPRO/brit-3 -I/usr/include/NASPRO/core-5 -g -O2 -no-undefined -module -avoid-version -shared -lnabrit -lnacore -ldl -lm -pthread -o ladspa.la -rpath /usr/lib/lv2/naspro-ladspa.lv2 manifest.lo bridge.lo pluglib.lo plugin.lo lv2api.lo libtool: link: gcc -shared -fPIC -DPIC .libs/manifest.o .libs/bridge.o .libs/pluglib.o .libs/plugin.o .libs/lv2api.o -lnabrit -lnacore -ldl -lm -pthread -g -O2 -pthread -pthread -Wl,-soname -Wl,ladspa.so -o .libs/ladspa.so libtool: link: ( cd ".libs" && rm -f "ladspa.la" && ln -s "../ladspa.la" "ladspa.la" ) make[4]: Leaving directory '/build/naspro-bridges-0.5.1/ladspa' make[3]: Leaving directory '/build/naspro-bridges-0.5.1/ladspa' Making all in dssi make[3]: Entering directory '/build/naspro-bridges-0.5.1/dssi' /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -pedantic -Wall -Werror -Wno-strict-aliasing -pthread -I/usr/include/NASPRO/brit-3 -I/usr/include/NASPRO/core-5 -I/usr/include/alsa -g -O2 -c -o manifest.lo manifest.c /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -pedantic -Wall -Werror -Wno-strict-aliasing -pthread -I/usr/include/NASPRO/brit-3 -I/usr/include/NASPRO/core-5 -I/usr/include/alsa -g -O2 -c -o bridge.lo bridge.c /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -pedantic -Wall -Werror -Wno-strict-aliasing -pthread -I/usr/include/NASPRO/brit-3 -I/usr/include/NASPRO/core-5 -I/usr/include/alsa -g -O2 -c -o pluglib.lo pluglib.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -pedantic -Wall -Werror -Wno-strict-aliasing -pthread -I/usr/include/NASPRO/brit-3 -I/usr/include/NASPRO/core-5 -I/usr/include/alsa -g -O2 -c manifest.c -fPIC -DPIC -o .libs/manifest.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -pedantic -Wall -Werror -Wno-strict-aliasing -pthread -I/usr/include/NASPRO/brit-3 -I/usr/include/NASPRO/core-5 -I/usr/include/alsa -g -O2 -c bridge.c -fPIC -DPIC -o .libs/bridge.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -pedantic -Wall -Werror -Wno-strict-aliasing -pthread -I/usr/include/NASPRO/brit-3 -I/usr/include/NASPRO/core-5 -I/usr/include/alsa -g -O2 -c pluglib.c -fPIC -DPIC -o .libs/pluglib.o /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -pedantic -Wall -Werror -Wno-strict-aliasing -pthread -I/usr/include/NASPRO/brit-3 -I/usr/include/NASPRO/core-5 -I/usr/include/alsa -g -O2 -c -o plugin.lo plugin.c /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -pedantic -Wall -Werror -Wno-strict-aliasing -pthread -I/usr/include/NASPRO/brit-3 -I/usr/include/NASPRO/core-5 -I/usr/include/alsa -g -O2 -c -o lv2api.lo lv2api.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -pedantic -Wall -Werror -Wno-strict-aliasing -pthread -I/usr/include/NASPRO/brit-3 -I/usr/include/NASPRO/core-5 -I/usr/include/alsa -g -O2 -c plugin.c -fPIC -DPIC -o .libs/plugin.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -pedantic -Wall -Werror -Wno-strict-aliasing -pthread -I/usr/include/NASPRO/brit-3 -I/usr/include/NASPRO/core-5 -I/usr/include/alsa -g -O2 -c lv2api.c -fPIC -DPIC -o .libs/lv2api.o /bin/bash ../libtool --tag=CC --mode=link gcc -pedantic -Wall -Werror -Wno-strict-aliasing -pthread -I/usr/include/NASPRO/brit-3 -I/usr/include/NASPRO/core-5 -I/usr/include/alsa -g -O2 -no-undefined -module -avoid-version -shared -lnabrit -lnacore -ldl -lm -pthread -lasound -o dssi.la -rpath /usr/lib/lv2/naspro-dssi.lv2 manifest.lo bridge.lo pluglib.lo plugin.lo lv2api.lo libtool: link: gcc -shared -fPIC -DPIC .libs/manifest.o .libs/bridge.o .libs/pluglib.o .libs/plugin.o .libs/lv2api.o -lnabrit -lnacore -ldl -lm -lasound -pthread -g -O2 -pthread -pthread -Wl,-soname -Wl,dssi.so -o .libs/dssi.so libtool: link: ( cd ".libs" && rm -f "dssi.la" && ln -s "../dssi.la" "dssi.la" ) make[3]: Leaving directory '/build/naspro-bridges-0.5.1/dssi' make[3]: Entering directory '/build/naspro-bridges-0.5.1' make[3]: Leaving directory '/build/naspro-bridges-0.5.1' make[2]: Leaving directory '/build/naspro-bridges-0.5.1' make[1]: Leaving directory '/build/naspro-bridges-0.5.1' dh_auto_test -O--parallel dh_auto_test: Compatibility levels before 9 are deprecated (level 7 in use) make -j3 check VERBOSE=1 make[1]: Entering directory '/build/naspro-bridges-0.5.1' Making check in ladspa make[2]: Entering directory '/build/naspro-bridges-0.5.1/ladspa' Making check in data make[3]: Entering directory '/build/naspro-bridges-0.5.1/ladspa/data' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/build/naspro-bridges-0.5.1/ladspa/data' make[3]: Entering directory '/build/naspro-bridges-0.5.1/ladspa' make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '/build/naspro-bridges-0.5.1/ladspa' make[2]: Leaving directory '/build/naspro-bridges-0.5.1/ladspa' Making check in dssi make[2]: Entering directory '/build/naspro-bridges-0.5.1/dssi' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/naspro-bridges-0.5.1/dssi' make[2]: Entering directory '/build/naspro-bridges-0.5.1' make[2]: Leaving directory '/build/naspro-bridges-0.5.1' make[1]: Leaving directory '/build/naspro-bridges-0.5.1' fakeroot debian/rules binary dh binary --parallel --with autoreconf dh: Compatibility levels before 9 are deprecated (level 7 in use) dh_testroot -O--parallel dh_prep -O--parallel dh_auto_install -O--parallel dh_auto_install: Compatibility levels before 9 are deprecated (level 7 in use) make -j1 install DESTDIR=/build/naspro-bridges-0.5.1/debian/naspro-bridges AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/naspro-bridges-0.5.1' Making install in ladspa make[2]: Entering directory '/build/naspro-bridges-0.5.1/ladspa' Making install in data make[3]: Entering directory '/build/naspro-bridges-0.5.1/ladspa/data' make[4]: Entering directory '/build/naspro-bridges-0.5.1/ladspa/data' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2' /bin/mkdir -p '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-ladspa-swh.lv2' /usr/bin/install -c -m 644 naspro-ladspa-swh.lv2/4x4PoleAllpass.ttl naspro-ladspa-swh.lv2/AMPitchShifter.ttl naspro-ladspa-swh.lv2/Aliasing.ttl naspro-ladspa-swh.lv2/AllpassDelayLinInterp.ttl naspro-ladspa-swh.lv2/AllpassDelayNonInterp.ttl naspro-ladspa-swh.lv2/AllpassDelaySplineInterp.ttl naspro-ladspa-swh.lv2/AnalogueOscillator.ttl naspro-ladspa-swh.lv2/ArtificialLatency.ttl naspro-ladspa-swh.lv2/AutoDivider.ttl naspro-ladspa-swh.lv2/AutoPhaser.ttl naspro-ladspa-swh.lv2/BarrysSatanMaximiser.ttl naspro-ladspa-swh.lv2/BodeFrequencyShifter.ttl naspro-ladspa-swh.lv2/BodeFrequencyShifterCV.ttl naspro-ladspa-swh.lv2/ChebyshevDistortion.ttl naspro-ladspa-swh.lv2/CombDelayLineLinInterp.ttl naspro-ladspa-swh.lv2/CombDelayLineNonInterp.ttl naspro-ladspa-swh.lv2/CombDelayLineSplineInterp.ttl naspro-ladspa-swh.lv2/CombFilter.ttl naspro-ladspa-swh.lv2/CombSplitter.ttl naspro-ladspa-swh.lv2/ConstantSignalGenerator.ttl naspro-ladspa-swh.lv2/Crossfade.ttl naspro-ladspa-swh.lv2/Crossfade4Outs.ttl naspro-ladspa-swh.lv2/CrossoverDistortion.ttl naspro-ladspa-swh.lv2/DCOffsetRemover.ttl naspro-ladspa-swh.lv2/DJEQ.ttl naspro-ladspa-swh.lv2/DJEQMono.ttl naspro-ladspa-swh.lv2/DJFlanger.ttl naspro-ladspa-swh.lv2/DebugPlugin.ttl naspro-ladspa-swh.lv2/Decimator.ttl naspro-ladspa-swh.lv2/Declipper.ttl naspro-ladspa-swh.lv2/Delayorama.ttl naspro-ladspa-swh.lv2/DiodeProcessor.ttl naspro-ladspa-swh.lv2/DysonCompressor.ttl naspro-ladspa-swh.lv2/ExponentialSignalDecay.ttl naspro-ladspa-swh.lv2/FMOscillator.ttl naspro-ladspa-swh.lv2/FastLookaheadLimiter.ttl naspro-ladspa-swh.lv2/FastOverdrive.ttl naspro-ladspa-swh.lv2/Flanger.ttl naspro-ladspa-swh.lv2/FoldoverDistortion.ttl naspro-ladspa-swh.lv2/FracAddressedDelayLine.ttl '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-ladspa-swh.lv2' /bin/mkdir -p '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-ladspa-swh.lv2' /usr/bin/install -c -m 644 naspro-ladspa-swh.lv2/FrequencyTracker.ttl naspro-ladspa-swh.lv2/GSMSimulator.ttl naspro-ladspa-swh.lv2/GVerb.ttl naspro-ladspa-swh.lv2/Gate.ttl naspro-ladspa-swh.lv2/GiantFlange.ttl naspro-ladspa-swh.lv2/GlameBandpassAnalogFilter.ttl naspro-ladspa-swh.lv2/GlameBandpassFilter.ttl naspro-ladspa-swh.lv2/GlameButterworthHighpass.ttl naspro-ladspa-swh.lv2/GlameButterworthLowpass.ttl naspro-ladspa-swh.lv2/GlameButterworthXoverFilter.ttl naspro-ladspa-swh.lv2/GlameHighpassFilter.ttl naspro-ladspa-swh.lv2/GlameLowpassFilter.ttl naspro-ladspa-swh.lv2/GongBeater.ttl naspro-ladspa-swh.lv2/GongModel.ttl naspro-ladspa-swh.lv2/HardLimiter.ttl naspro-ladspa-swh.lv2/HarmonicGenerator.ttl naspro-ladspa-swh.lv2/HermesFilter.ttl naspro-ladspa-swh.lv2/HigherQualityPitchScaler.ttl naspro-ladspa-swh.lv2/HilbertTransformer.ttl naspro-ladspa-swh.lv2/IEEESinglePrecisionNoise.ttl naspro-ladspa-swh.lv2/ImpulseConvolver.ttl naspro-ladspa-swh.lv2/IntegerNoise.ttl naspro-ladspa-swh.lv2/Inverter.ttl naspro-ladspa-swh.lv2/Karaoke.ttl naspro-ladspa-swh.lv2/LCRDelay.ttl naspro-ladspa-swh.lv2/LFOPhaser.ttl naspro-ladspa-swh.lv2/LSFilter.ttl naspro-ladspa-swh.lv2/LookaheadLimiter.ttl naspro-ladspa-swh.lv2/LookaheadLimiterFixedLatency.ttl naspro-ladspa-swh.lv2/MagsNotchFilter.ttl naspro-ladspa-swh.lv2/MatrixMSToStereo.ttl naspro-ladspa-swh.lv2/MatrixSpatialiser.ttl naspro-ladspa-swh.lv2/MatrixStereoToMS.ttl naspro-ladspa-swh.lv2/ModulatableDelay.ttl naspro-ladspa-swh.lv2/MonoToStereoSplitter.ttl naspro-ladspa-swh.lv2/MultibandEQ.ttl naspro-ladspa-swh.lv2/MultivoiceChorus.ttl naspro-ladspa-swh.lv2/NonbandlimitedImpulses.ttl naspro-ladspa-swh.lv2/PitchScaler.ttl naspro-ladspa-swh.lv2/PlateReverb.ttl '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-ladspa-swh.lv2' /bin/mkdir -p '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-ladspa-rubberband.lv2' /usr/bin/install -c -m 644 naspro-ladspa-rubberband.lv2/Mono.ttl naspro-ladspa-rubberband.lv2/Stereo.ttl naspro-ladspa-rubberband.lv2/manifest.ttl '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-ladspa-rubberband.lv2' /bin/mkdir -p '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-ladspa-invada.lv2' /usr/bin/install -c -m 644 naspro-ladspa-invada.lv2/CompressorMono.ttl naspro-ladspa-invada.lv2/CompressorStereo.ttl naspro-ladspa-invada.lv2/ERReverbMonoIn.ttl naspro-ladspa-invada.lv2/ERReverbSumLRIn.ttl naspro-ladspa-invada.lv2/HighPassMono.ttl naspro-ladspa-invada.lv2/HighPassStereo.ttl naspro-ladspa-invada.lv2/InputModule.ttl naspro-ladspa-invada.lv2/LowPassMono.ttl naspro-ladspa-invada.lv2/LowPassStereo.ttl naspro-ladspa-invada.lv2/TubeMono.ttl naspro-ladspa-invada.lv2/TubeStereo.ttl naspro-ladspa-invada.lv2/manifest.ttl '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-ladspa-invada.lv2' /bin/mkdir -p '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-ladspa-calf.lv2' /usr/bin/install -c -m 644 naspro-ladspa-calf.lv2/Compressor.ttl naspro-ladspa-calf.lv2/Filter.ttl naspro-ladspa-calf.lv2/Flanger.ttl naspro-ladspa-calf.lv2/MultiChorus.ttl naspro-ladspa-calf.lv2/Phaser.ttl naspro-ladspa-calf.lv2/Reverb.ttl naspro-ladspa-calf.lv2/RotarySpeaker.ttl naspro-ladspa-calf.lv2/VintageDelay.ttl naspro-ladspa-calf.lv2/manifest.ttl '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-ladspa-calf.lv2' /bin/mkdir -p '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-ladspa-swh.lv2' /usr/bin/install -c -m 644 naspro-ladspa-swh.lv2/PointerCastDistortion.ttl naspro-ladspa-swh.lv2/RateShifter.ttl naspro-ladspa-swh.lv2/RetroFlanger.ttl naspro-ladspa-swh.lv2/ReverseDelay.ttl naspro-ladspa-swh.lv2/RingmodWithLFO.ttl naspro-ladspa-swh.lv2/RingmodWithTwoInputs.ttl naspro-ladspa-swh.lv2/SC1.ttl naspro-ladspa-swh.lv2/SC2.ttl naspro-ladspa-swh.lv2/SC3.ttl naspro-ladspa-swh.lv2/SC4.ttl naspro-ladspa-swh.lv2/SC4Mono.ttl naspro-ladspa-swh.lv2/SE4.ttl naspro-ladspa-swh.lv2/SignalSifter.ttl naspro-ladspa-swh.lv2/SimpleAmplifier.ttl naspro-ladspa-swh.lv2/SimpleDelayLineLinInterp.ttl naspro-ladspa-swh.lv2/SimpleDelayLineNonInterp.ttl naspro-ladspa-swh.lv2/SimpleDelayLineSplineInterp.ttl naspro-ladspa-swh.lv2/SinCosOscillator.ttl naspro-ladspa-swh.lv2/SingleBandParametric.ttl naspro-ladspa-swh.lv2/SinusWavewrapper.ttl naspro-ladspa-swh.lv2/SmoothDecimator.ttl naspro-ladspa-swh.lv2/StateVariableFilter.ttl naspro-ladspa-swh.lv2/StepDemuxer.ttl naspro-ladspa-swh.lv2/SurroundMatrixEncoder.ttl naspro-ladspa-swh.lv2/TapeDelaySimulation.ttl naspro-ladspa-swh.lv2/TransientMangler.ttl naspro-ladspa-swh.lv2/TripleBandParametricWithShelves.ttl naspro-ladspa-swh.lv2/ValveRectifier.ttl naspro-ladspa-swh.lv2/ValveSaturation.ttl naspro-ladspa-swh.lv2/VyNil.ttl naspro-ladspa-swh.lv2/WaveShaper.ttl naspro-ladspa-swh.lv2/WaveTerrainOscillator.ttl naspro-ladspa-swh.lv2/manifest.ttl naspro-ladspa-swh.lv2/z1.ttl '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-ladspa-swh.lv2' /bin/mkdir -p '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-ladspa-tap.lv2' /usr/bin/install -c -m 644 naspro-ladspa-tap.lv2/AutoPanner.ttl naspro-ladspa-tap.lv2/ChorusFlanger.ttl naspro-ladspa-tap.lv2/DeEsser.ttl naspro-ladspa-tap.lv2/DynamicsM.ttl naspro-ladspa-tap.lv2/DynamicsSt.ttl naspro-ladspa-tap.lv2/Equalizer.ttl naspro-ladspa-tap.lv2/EqualizerBW.ttl naspro-ladspa-tap.lv2/FractalDoubler.ttl naspro-ladspa-tap.lv2/PinkFractalNoise.ttl naspro-ladspa-tap.lv2/PitchShifter.ttl naspro-ladspa-tap.lv2/Reflector.ttl naspro-ladspa-tap.lv2/Reverberator.ttl naspro-ladspa-tap.lv2/RotarySpeaker.ttl naspro-ladspa-tap.lv2/ScalingLimiter.ttl naspro-ladspa-tap.lv2/SigmoidBooster.ttl naspro-ladspa-tap.lv2/StereoEcho.ttl naspro-ladspa-tap.lv2/Tremolo.ttl naspro-ladspa-tap.lv2/TubeWarmth.ttl naspro-ladspa-tap.lv2/Vibrato.ttl naspro-ladspa-tap.lv2/manifest.ttl '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-ladspa-tap.lv2' /bin/mkdir -p '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-ladspa-caps.lv2' /usr/bin/install -c -m 644 naspro-ladspa-caps.lv2/AmpVTS.ttl naspro-ladspa-caps.lv2/AutoFilter.ttl naspro-ladspa-caps.lv2/CEO.ttl naspro-ladspa-caps.lv2/CabinetII.ttl naspro-ladspa-caps.lv2/CabinetIII.ttl naspro-ladspa-caps.lv2/CabinetIV.ttl naspro-ladspa-caps.lv2/ChorusI.ttl naspro-ladspa-caps.lv2/ChorusII.ttl naspro-ladspa-caps.lv2/Click.ttl naspro-ladspa-caps.lv2/Compress.ttl naspro-ladspa-caps.lv2/CompressX2.ttl naspro-ladspa-caps.lv2/Dirac.ttl naspro-ladspa-caps.lv2/Eq10.ttl naspro-ladspa-caps.lv2/Eq10X2.ttl naspro-ladspa-caps.lv2/Eq4p.ttl naspro-ladspa-caps.lv2/Fractal.ttl naspro-ladspa-caps.lv2/JVRev.ttl naspro-ladspa-caps.lv2/Narrower.ttl naspro-ladspa-caps.lv2/NoiseGate.ttl naspro-ladspa-caps.lv2/PhaserII.ttl naspro-ladspa-caps.lv2/Plate.ttl naspro-ladspa-caps.lv2/PlateX2.ttl naspro-ladspa-caps.lv2/Roessler.ttl naspro-ladspa-caps.lv2/Saturate.ttl naspro-ladspa-caps.lv2/Scape.ttl naspro-ladspa-caps.lv2/Sin.ttl naspro-ladspa-caps.lv2/Spice.ttl naspro-ladspa-caps.lv2/SpiceX2.ttl naspro-ladspa-caps.lv2/StereoChorusII.ttl naspro-ladspa-caps.lv2/StereoChorusII2x2.ttl naspro-ladspa-caps.lv2/StereoPhaserII.ttl naspro-ladspa-caps.lv2/StereoPhaserII2x2.ttl naspro-ladspa-caps.lv2/ToneStack.ttl naspro-ladspa-caps.lv2/White.ttl naspro-ladspa-caps.lv2/Wider.ttl naspro-ladspa-caps.lv2/manifest.ttl '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-ladspa-caps.lv2' make[4]: Leaving directory '/build/naspro-bridges-0.5.1/ladspa/data' make[3]: Leaving directory '/build/naspro-bridges-0.5.1/ladspa/data' make[3]: Entering directory '/build/naspro-bridges-0.5.1/ladspa' make[4]: Entering directory '/build/naspro-bridges-0.5.1/ladspa' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-ladspa.lv2' /usr/bin/install -c -m 644 manifest.ttl '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-ladspa.lv2' /bin/mkdir -p '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-ladspa.lv2' /bin/bash ../libtool --mode=install /usr/bin/install -c ladspa.la '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-ladspa.lv2' libtool: install: /usr/bin/install -c .libs/ladspa.so /build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-ladspa.lv2/ladspa.so libtool: install: /usr/bin/install -c .libs/ladspa.lai /build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-ladspa.lv2/ladspa.la libtool: warning: remember to run 'libtool --finish /usr/lib/lv2/naspro-ladspa.lv2' make install-data-hook make[5]: Entering directory '/build/naspro-bridges-0.5.1/ladspa' rm -f /build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-ladspa.lv2/ladspa.la make[5]: Leaving directory '/build/naspro-bridges-0.5.1/ladspa' make[4]: Leaving directory '/build/naspro-bridges-0.5.1/ladspa' make[3]: Leaving directory '/build/naspro-bridges-0.5.1/ladspa' make[2]: Leaving directory '/build/naspro-bridges-0.5.1/ladspa' Making install in dssi make[2]: Entering directory '/build/naspro-bridges-0.5.1/dssi' make[3]: Entering directory '/build/naspro-bridges-0.5.1/dssi' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-dssi.lv2' /usr/bin/install -c -m 644 manifest.ttl '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-dssi.lv2' /bin/mkdir -p '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-dssi.lv2' /bin/bash ../libtool --mode=install /usr/bin/install -c dssi.la '/build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-dssi.lv2' libtool: install: /usr/bin/install -c .libs/dssi.so /build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-dssi.lv2/dssi.so libtool: install: /usr/bin/install -c .libs/dssi.lai /build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-dssi.lv2/dssi.la libtool: warning: remember to run 'libtool --finish /usr/lib/lv2/naspro-dssi.lv2' make install-data-hook make[4]: Entering directory '/build/naspro-bridges-0.5.1/dssi' rm -f /build/naspro-bridges-0.5.1/debian/naspro-bridges/usr/lib/lv2/naspro-dssi.lv2/dssi.la make[4]: Leaving directory '/build/naspro-bridges-0.5.1/dssi' make[3]: Leaving directory '/build/naspro-bridges-0.5.1/dssi' make[2]: Leaving directory '/build/naspro-bridges-0.5.1/dssi' make[2]: Entering directory '/build/naspro-bridges-0.5.1' make[3]: Entering directory '/build/naspro-bridges-0.5.1' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/naspro-bridges-0.5.1' make[2]: Leaving directory '/build/naspro-bridges-0.5.1' make[1]: Leaving directory '/build/naspro-bridges-0.5.1' dh_installdocs -O--parallel dh_installdocs: Compatibility levels before 9 are deprecated (level 7 in use) dh_installchangelogs -O--parallel dh_installchangelogs: Compatibility levels before 9 are deprecated (level 7 in use) dh_installinit -O--parallel dh_installinit: Compatibility levels before 9 are deprecated (level 7 in use) dh_perl -O--parallel dh_link -O--parallel dh_strip_nondeterminism -O--parallel dh_compress -O--parallel dh_compress: Compatibility levels before 9 are deprecated (level 7 in use) dh_fixperms -O--parallel dh_missing -O--parallel dh_missing: Compatibility levels before 9 are deprecated (level 7 in use) dh_strip -O--parallel dh_strip: Compatibility levels before 9 are deprecated (level 7 in use) dh_makeshlibs -O--parallel dh_makeshlibs: Compatibility levels before 9 are deprecated (level 7 in use) dh_shlibdeps -O--parallel dh_shlibdeps: Compatibility levels before 9 are deprecated (level 7 in use) dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/naspro-bridges/usr/lib/lv2/naspro-ladspa.lv2/ladspa.so debian/naspro-bridges/usr/lib/lv2/naspro-dssi.lv2/dssi.so were not linked against libdl.so.2 (they use none of the library's symbols) dh_installdeb -O--parallel dh_installdeb: Compatibility levels before 9 are deprecated (level 7 in use) dh_gencontrol -O--parallel dh_md5sums -O--parallel dh_builddeb -O--parallel dpkg-deb: building package 'naspro-bridges' in '../naspro-bridges_0.5.1-2_armhf.deb'. dpkg-deb: building package 'naspro-bridges-dbgsym' in '../naspro-bridges-dbgsym_0.5.1-2_armhf.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../naspro-bridges_0.5.1-2_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/30049 and its subdirectories I: Current time: Fri May 22 13:53:35 -12 2020 I: pbuilder-time-stamp: 1590198815