I: pbuilder: network access will be disabled during build I: Current time: Sat May 15 06:59:56 -12 2021 I: pbuilder-time-stamp: 1621105196 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libmakefile-dom-perl_0.008-2.dsc] I: copying [./libmakefile-dom-perl_0.008.orig.tar.gz] I: copying [./libmakefile-dom-perl_0.008-2.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Wed Aug 2 03:23:13 2017 -12 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libmakefile-dom-perl_0.008-2.dsc dpkg-source: info: extracting libmakefile-dom-perl in libmakefile-dom-perl-0.008 dpkg-source: info: unpacking libmakefile-dom-perl_0.008.orig.tar.gz dpkg-source: info: unpacking libmakefile-dom-perl_0.008-2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying spelling.patch I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 9), perl, libclone-perl, liblist-moreutils-perl, libparams-util-perl, libtest-base-perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19231 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 9); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on libclone-perl; however: Package libclone-perl is not installed. pbuilder-satisfydepends-dummy depends on liblist-moreutils-perl; however: Package liblist-moreutils-perl is not installed. pbuilder-satisfydepends-dummy depends on libparams-util-perl; however: Package libparams-util-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-base-perl; however: Package libtest-base-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libalgorithm-diff-perl{a} libarchive-zip-perl{a} libbsd0{a} libclone-perl{a} libcroco3{a} libelf1{a} libexporter-tiny-perl{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libicu63{a} liblist-moreutils-perl{a} libmagic-mgc{a} libmagic1{a} libncurses6{a} libparams-util-perl{a} libpipeline1{a} libsigsegv2{a} libspiffy-perl{a} libtest-base-perl{a} libtext-diff-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libalgorithm-diff-xs-perl libarchive-cpio-perl libglib2.0-data libgpm2 libltdl-dev libmail-sendmail-perl libtest-deep-perl libyaml-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 41 newly installed, 0 to remove and 0 not upgraded. Need to get 19.6 MB of archives. After unpacking 71.0 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main i386 libbsd0 i386 0.9.1-2 [104 kB] Get: 2 http://deb.debian.org/debian buster/main i386 bsdmainutils i386 11.1.2+b1 [193 kB] Get: 3 http://deb.debian.org/debian buster/main i386 libuchardet0 i386 0.0.6-3 [65.2 kB] Get: 4 http://deb.debian.org/debian buster/main i386 groff-base i386 1.22.4-3 [935 kB] Get: 5 http://deb.debian.org/debian buster/main i386 libpipeline1 i386 1.5.1-2 [33.3 kB] Get: 6 http://deb.debian.org/debian buster/main i386 man-db i386 2.8.5-2 [1284 kB] Get: 7 http://deb.debian.org/debian buster/main i386 sensible-utils all 0.0.12 [15.8 kB] Get: 8 http://deb.debian.org/debian buster/main i386 libmagic-mgc i386 1:5.35-4+deb10u1 [242 kB] Get: 9 http://deb.debian.org/debian buster/main i386 libmagic1 i386 1:5.35-4+deb10u1 [124 kB] Get: 10 http://deb.debian.org/debian buster/main i386 file i386 1:5.35-4+deb10u1 [66.3 kB] Get: 11 http://deb.debian.org/debian buster/main i386 gettext-base i386 0.19.8.1-9 [124 kB] Get: 12 http://deb.debian.org/debian buster/main i386 libsigsegv2 i386 2.12-2 [33.2 kB] Get: 13 http://deb.debian.org/debian buster/main i386 m4 i386 1.4.18-2 [205 kB] Get: 14 http://deb.debian.org/debian buster/main i386 autoconf all 2.69-11 [341 kB] Get: 15 http://deb.debian.org/debian buster/main i386 autotools-dev all 20180224.1 [77.0 kB] Get: 16 http://deb.debian.org/debian buster/main i386 automake all 1:1.16.1-4 [771 kB] Get: 17 http://deb.debian.org/debian buster/main i386 autopoint all 0.19.8.1-9 [434 kB] Get: 18 http://deb.debian.org/debian buster/main i386 libtool all 2.4.6-9 [547 kB] Get: 19 http://deb.debian.org/debian buster/main i386 dh-autoreconf all 19 [16.9 kB] Get: 20 http://deb.debian.org/debian buster/main i386 libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 21 http://deb.debian.org/debian buster/main i386 libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 22 http://deb.debian.org/debian buster/main i386 dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 23 http://deb.debian.org/debian buster/main i386 libelf1 i386 0.176-1.1 [166 kB] Get: 24 http://deb.debian.org/debian buster/main i386 dwz i386 0.12-3 [81.4 kB] Get: 25 http://deb.debian.org/debian buster/main i386 libglib2.0-0 i386 2.58.3-2+deb10u2 [1334 kB] Get: 26 http://deb.debian.org/debian buster/main i386 libicu63 i386 63.1-6 [8443 kB] Get: 27 http://deb.debian.org/debian buster/main i386 libxml2 i386 2.9.4+dfsg1-7+b3 [721 kB] Get: 28 http://deb.debian.org/debian buster/main i386 libcroco3 i386 0.6.12-3 [151 kB] Get: 29 http://deb.debian.org/debian buster/main i386 libncurses6 i386 6.1+20181013-2+deb10u2 [109 kB] Get: 30 http://deb.debian.org/debian buster/main i386 gettext i386 0.19.8.1-9 [1314 kB] Get: 31 http://deb.debian.org/debian buster/main i386 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 32 http://deb.debian.org/debian buster/main i386 po-debconf all 1.0.21 [248 kB] Get: 33 http://deb.debian.org/debian buster/main i386 debhelper all 12.1.1 [1016 kB] Get: 34 http://deb.debian.org/debian buster/main i386 libalgorithm-diff-perl all 1.19.03-2 [47.9 kB] Get: 35 http://deb.debian.org/debian buster/main i386 libclone-perl i386 0.41-1+b1 [14.8 kB] Get: 36 http://deb.debian.org/debian buster/main i386 libexporter-tiny-perl all 1.002001-1 [36.9 kB] Get: 37 http://deb.debian.org/debian buster/main i386 liblist-moreutils-perl i386 0.416-1+b4 [64.6 kB] Get: 38 http://deb.debian.org/debian buster/main i386 libparams-util-perl i386 1.07-3+b4 [23.7 kB] Get: 39 http://deb.debian.org/debian buster/main i386 libspiffy-perl all 0.46-1 [25.7 kB] Get: 40 http://deb.debian.org/debian buster/main i386 libtext-diff-perl all 1.45-1 [27.7 kB] Get: 41 http://deb.debian.org/debian buster/main i386 libtest-base-perl all 0.89-1 [36.4 kB] Fetched 19.6 MB in 0s (83.8 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:i386. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19231 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_i386.deb ... Unpacking libbsd0:i386 (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_i386.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../02-libuchardet0_0.0.6-3_i386.deb ... Unpacking libuchardet0:i386 (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_i386.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../04-libpipeline1_1.5.1-2_i386.deb ... Unpacking libpipeline1:i386 (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_i386.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../06-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../07-libmagic-mgc_1%3a5.35-4+deb10u1_i386.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:i386. Preparing to unpack .../08-libmagic1_1%3a5.35-4+deb10u1_i386.deb ... Unpacking libmagic1:i386 (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../09-file_1%3a5.35-4+deb10u1_i386.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../10-gettext-base_0.19.8.1-9_i386.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:i386. Preparing to unpack .../11-libsigsegv2_2.12-2_i386.deb ... Unpacking libsigsegv2:i386 (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-2_i386.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:i386. Preparing to unpack .../22-libelf1_0.176-1.1_i386.deb ... Unpacking libelf1:i386 (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.12-3_i386.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:i386. Preparing to unpack .../24-libglib2.0-0_2.58.3-2+deb10u2_i386.deb ... Unpacking libglib2.0-0:i386 (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:i386. Preparing to unpack .../25-libicu63_63.1-6_i386.deb ... Unpacking libicu63:i386 (63.1-6) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../26-libxml2_2.9.4+dfsg1-7+b3_i386.deb ... Unpacking libxml2:i386 (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:i386. Preparing to unpack .../27-libcroco3_0.6.12-3_i386.deb ... Unpacking libcroco3:i386 (0.6.12-3) ... Selecting previously unselected package libncurses6:i386. Preparing to unpack .../28-libncurses6_6.1+20181013-2+deb10u2_i386.deb ... Unpacking libncurses6:i386 (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.19.8.1-9_i386.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package libalgorithm-diff-perl. Preparing to unpack .../33-libalgorithm-diff-perl_1.19.03-2_all.deb ... Unpacking libalgorithm-diff-perl (1.19.03-2) ... Selecting previously unselected package libclone-perl. Preparing to unpack .../34-libclone-perl_0.41-1+b1_i386.deb ... Unpacking libclone-perl (0.41-1+b1) ... Selecting previously unselected package libexporter-tiny-perl. Preparing to unpack .../35-libexporter-tiny-perl_1.002001-1_all.deb ... Unpacking libexporter-tiny-perl (1.002001-1) ... Selecting previously unselected package liblist-moreutils-perl. Preparing to unpack .../36-liblist-moreutils-perl_0.416-1+b4_i386.deb ... Unpacking liblist-moreutils-perl (0.416-1+b4) ... Selecting previously unselected package libparams-util-perl. Preparing to unpack .../37-libparams-util-perl_1.07-3+b4_i386.deb ... Unpacking libparams-util-perl (1.07-3+b4) ... Selecting previously unselected package libspiffy-perl. Preparing to unpack .../38-libspiffy-perl_0.46-1_all.deb ... Unpacking libspiffy-perl (0.46-1) ... Selecting previously unselected package libtext-diff-perl. Preparing to unpack .../39-libtext-diff-perl_1.45-1_all.deb ... Unpacking libtext-diff-perl (1.45-1) ... Selecting previously unselected package libtest-base-perl. Preparing to unpack .../40-libtest-base-perl_0.89-1_all.deb ... Unpacking libtest-base-perl (0.89-1) ... Setting up libpipeline1:i386 (1.5.1-2) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libclone-perl (0.41-1+b1) ... Setting up libalgorithm-diff-perl (1.19.03-2) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:i386 (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libmagic1:i386 (1:5.35-4+deb10u1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libicu63:i386 (63.1-6) ... Setting up autotools-dev (20180224.1) ... Setting up libtext-diff-perl (1.45-1) ... Setting up libncurses6:i386 (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:i386 (2.12-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up libparams-util-perl (1.07-3+b4) ... Setting up libspiffy-perl (0.46-1) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:i386 (0.0.6-3) ... Setting up libexporter-tiny-perl (1.002001-1) ... Setting up libbsd0:i386 (0.9.1-2) ... Setting up libelf1:i386 (0.176-1.1) ... Setting up libxml2:i386 (2.9.4+dfsg1-7+b3) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libtool (2.4.6-9) ... Setting up liblist-moreutils-perl (0.416-1+b4) ... Setting up libtest-base-perl (0.89-1) ... Setting up m4 (1.4.18-2) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:i386 (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up gettext (0.19.8.1-9) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up po-debconf (1.0.21) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/libmakefile-dom-perl-0.008/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package libmakefile-dom-perl dpkg-buildpackage: info: source version 0.008-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_auto_configure perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -ffile-prefix-map=/build/libmakefile-dom-perl-0.008=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/libmakefile-dom-perl-0.008=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" *** Module::AutoInstall version 1.06 *** Checking for Perl dependencies... [Core Features] - List::MoreUtils ...loaded. (0.416 >= 0.21) - Params::Util ...loaded. (1.07 >= 0.22) - Clone ...loaded. (0.41 >= 0.18) - Filter::Util::Call ...loaded. (1.58) *** Module::AutoInstall configuration finished. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Makefile::DOM Writing MYMETA.yml and MYMETA.json dh_auto_build make -j1 make[1]: Entering directory '/build/libmakefile-dom-perl-0.008' cp lib/MDOM/Node.pm blib/lib/MDOM/Node.pm cp lib/Makefile/DOM.pm blib/lib/Makefile/DOM.pm cp lib/MDOM/Rule/StaticPattern.pm blib/lib/MDOM/Rule/StaticPattern.pm cp lib/MDOM/Directive.pm blib/lib/MDOM/Directive.pm cp lib/MDOM/Document.pm blib/lib/MDOM/Document.pm cp lib/MDOM/Unknown.pm blib/lib/MDOM/Unknown.pm cp lib/MDOM/Command.pm blib/lib/MDOM/Command.pm cp lib/MDOM/Token.pm blib/lib/MDOM/Token.pm cp lib/MDOM/Token/Modifier.pm blib/lib/MDOM/Token/Modifier.pm cp lib/MDOM/Document/Gmake.pm blib/lib/MDOM/Document/Gmake.pm cp lib/MDOM/Rule.pm blib/lib/MDOM/Rule.pm cp lib/MDOM/Token/Separator.pm blib/lib/MDOM/Token/Separator.pm cp lib/MDOM/Rule/Simple.pm blib/lib/MDOM/Rule/Simple.pm cp lib/MDOM/Token/Continuation.pm blib/lib/MDOM/Token/Continuation.pm cp lib/MDOM/Token/Comment.pm blib/lib/MDOM/Token/Comment.pm cp lib/MDOM/Token/Whitespace.pm blib/lib/MDOM/Token/Whitespace.pm cp lib/MDOM/Util.pm blib/lib/MDOM/Util.pm cp lib/MDOM/Dumper.pm blib/lib/MDOM/Dumper.pm cp lib/MDOM/Token/Interpolation.pm blib/lib/MDOM/Token/Interpolation.pm cp lib/MDOM/Token/Bare.pm blib/lib/MDOM/Token/Bare.pm cp lib/MDOM/Assignment.pm blib/lib/MDOM/Assignment.pm cp lib/MDOM/Element.pm blib/lib/MDOM/Element.pm Manifying 20 pod documents make[1]: Leaving directory '/build/libmakefile-dom-perl-0.008' dh_auto_test make -j1 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libmakefile-dom-perl-0.008' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/*.t t/mdom/*.t t/mdom/*/*.t t/mdom/assignment.t ................. 1..24 ok 1 - DOM tree okay - TEST 1: ok 2 - Assignment obj okay - TEST 1: ok 3 - lhs array okay - TEST 1: ok 4 - lhs calar okay - TEST 1: ok 5 - Assignment obj okay - TEST 1: ok 6 - rhs array okay - TEST 1: ok 7 - rhs calar okay - TEST 1: ok 8 - op okay - TEST 1: ok 9 - DOM tree okay - TEST 2: ok 10 - Assignment obj okay - TEST 2: ok 11 - lhs array okay - TEST 2: ok 12 - lhs calar okay - TEST 2: ok 13 - Assignment obj okay - TEST 2: ok 14 - rhs array okay - TEST 2: ok 15 - rhs calar okay - TEST 2: ok 16 - op okay - TEST 2: ok 17 - DOM tree okay - TEST 3: ok 18 - Assignment obj okay - TEST 3: ok 19 - lhs array okay - TEST 3: ok 20 - lhs calar okay - TEST 3: ok 21 - Assignment obj okay - TEST 3: ok 22 - rhs array okay - TEST 3: ok 23 - rhs calar okay - TEST 3: ok 24 - op okay - TEST 3: ok t/mdom/gmake/assignment.t ........... 1..24 ok 1 - TEST 1: recursively expanded variable setting - DOM defined ok 2 - TEST 1: recursively expanded variable setting - DOM structure ok ok 3 - TEST 2: recursively expanded variable setting (more complex) - DOM defined ok 4 - TEST 2: recursively expanded variable setting (more complex) - DOM structure ok ok 5 - TEST 3: var assignment changed the "rule context" to VOID - DOM defined ok 6 - TEST 3: var assignment changed the "rule context" to VOID - DOM structure ok ok 7 - TEST 4: assignment indented by a tab which is not in the "rule context" - DOM defined ok 8 - TEST 4: assignment indented by a tab which is not in the "rule context" - DOM structure ok ok 9 - TEST 5: simply-expanded var assignment - DOM defined ok 10 - TEST 5: simply-expanded var assignment - DOM structure ok ok 11 - TEST 6: multi-line var assignment (recursively-expanded) - DOM defined ok 12 - TEST 6: multi-line var assignment (recursively-expanded) - DOM structure ok ok 13 - TEST 7: multi-line var assignment (simply-expanded) - DOM defined ok 14 - TEST 7: multi-line var assignment (simply-expanded) - DOM structure ok ok 15 - TEST 8: other assignment variations (simply-expanded) - DOM defined ok 16 - TEST 8: other assignment variations (simply-expanded) - DOM structure ok ok 17 - TEST 9: override + assignment (=) - DOM defined ok 18 - TEST 9: override + assignment (=) - DOM structure ok ok 19 - TEST 10: override + assignment (:=) - DOM defined ok 20 - TEST 10: override + assignment (:=) - DOM structure ok ok 21 - TEST 11: override + assignment (+=) - DOM defined ok 22 - TEST 11: override + assignment (+=) - DOM structure ok ok 23 - TEST 12: override + assignment (?=) - DOM defined ok 24 - TEST 12: override + assignment (?=) - DOM structure ok ok t/mdom/gmake/command.t .............. 1..26 ok 1 - TEST 1: blank lines and comment lines as comments - DOM defined ok 2 - TEST 1: blank lines and comment lines as comments - DOM structure ok ok 3 - TEST 2: empty commands - DOM defined ok 4 - TEST 2: empty commands - DOM structure ok ok 5 - TEST 3: comments as commands - DOM defined ok 6 - TEST 3: comments as commands - DOM structure ok ok 7 - TEST 4: var def as commands - DOM defined ok 8 - TEST 4: var def as commands - DOM structure ok ok 9 - TEST 5: conditional directives as commands - DOM defined ok 10 - TEST 5: conditional directives as commands - DOM structure ok ok 11 - TEST 6: line continuations in commands - DOM defined ok 12 - TEST 6: line continuations in commands - DOM structure ok ok 13 - TEST 7: line continuations in prereqs and "inline" commands - DOM defined ok 14 - TEST 7: line continuations in prereqs and "inline" commands - DOM structure ok ok 15 - TEST 8: whitespace before command modifiers (@) - DOM defined ok 16 - TEST 8: whitespace before command modifiers (@) - DOM structure ok ok 17 - TEST 9: whitespace before command modifiers (+/-) - DOM defined ok 18 - TEST 9: whitespace before command modifiers (+/-) - DOM structure ok ok 19 - TEST 10: multi-line commands - DOM defined ok 20 - TEST 10: multi-line commands - DOM structure ok ok 21 - TEST 11: multi-modifiers - DOM defined ok 22 - TEST 11: multi-modifiers - DOM structure ok ok 23 - TEST 12: line continuations in commands - DOM defined ok 24 - TEST 12: line continuations in commands - DOM structure ok ok 25 - TEST 13: ditto (with interpolations) - DOM defined ok 26 - TEST 13: ditto (with interpolations) - DOM structure ok ok t/mdom/gmake/comment.t .............. 1..26 ok 1 - TEST 1: single-line comment - DOM defined ok 2 - TEST 1: single-line comment - DOM structure ok ok 3 - TEST 2: comment indented by spaces - DOM defined ok 4 - TEST 2: comment indented by spaces - DOM structure ok ok 5 - TEST 3: - DOM defined ok 6 - TEST 3: - DOM structure ok ok 7 - TEST 4: comments indented by a tab outside the "rule context" - DOM defined ok 8 - TEST 4: comments indented by a tab outside the "rule context" - DOM structure ok ok 9 - TEST 5: comments indented by a tab within the "rule context" - DOM defined ok 10 - TEST 5: comments indented by a tab within the "rule context" - DOM structure ok ok 11 - TEST 6: line continuations in comments - DOM defined ok 12 - TEST 6: line continuations in comments - DOM structure ok ok 13 - TEST 7: unescaped '\#' - DOM defined ok 14 - TEST 7: unescaped '\#' - DOM structure ok ok 15 - TEST 8: when no space between words and '\#' - DOM defined ok 16 - TEST 8: when no space between words and '\#' - DOM structure ok ok 17 - TEST 9: '\#' escaped by '\' - DOM defined ok 18 - TEST 9: '\#' escaped by '\' - DOM structure ok ok 19 - TEST 10: standalone single-line comment - DOM defined ok 20 - TEST 10: standalone single-line comment - DOM structure ok ok 21 - TEST 11: standalone multi-line comment - DOM defined ok 22 - TEST 11: standalone multi-line comment - DOM structure ok ok 23 - TEST 12: comments indented by a tab - DOM defined ok 24 - TEST 12: comments indented by a tab - DOM structure ok ok 25 - TEST 13: multi-line comment indented with tabs - DOM defined ok 26 - TEST 13: multi-line comment indented with tabs - DOM structure ok ok t/mdom/gmake/directive-define.t ..... 1..2 ok 1 - TEST 1: multi-line var assignment (the 'define' directive) - DOM defined ok 2 - TEST 1: multi-line var assignment (the 'define' directive) - DOM structure ok ok t/mdom/gmake/directive-export.t ..... 1..2 ok 1 - TEST 13: export + assignment (:=) - DOM defined ok 2 - TEST 13: export + assignment (:=) - DOM structure ok ok t/mdom/gmake/directive-include.t .... 1..10 ok 1 - TEST 1: the include directive - DOM defined ok 2 - TEST 1: the include directive - DOM structure ok ok 3 - TEST 2: multi-line include directive - DOM defined ok 4 - TEST 2: multi-line include directive - DOM structure ok ok 5 - TEST 3: the -include directive - DOM defined ok 6 - TEST 3: the -include directive - DOM structure ok ok 7 - TEST 4: multi-line -include directive - DOM defined ok 8 - TEST 4: multi-line -include directive - DOM structure ok ok 9 - TEST 5: sinclude directive - DOM defined ok 10 - TEST 5: sinclude directive - DOM structure ok ok t/mdom/gmake/directive-vpath.t ...... 1..6 ok 1 - TEST 1: - DOM defined ok 2 - TEST 1: - DOM structure ok ok 3 - TEST 1: the vpath directive - DOM defined ok 4 - TEST 1: the vpath directive - DOM structure ok ok 5 - TEST 2: multi-line vpath directive - DOM defined ok 6 - TEST 2: multi-line vpath directive - DOM structure ok ok t/mdom/gmake/interpolation.t ........ 1..6 ok 1 - TEST 1: variable references in prereq list - DOM defined ok 2 - TEST 1: variable references in prereq list - DOM structure ok ok 3 - TEST 2: variable interpolation cannot be escaped by \ - DOM defined ok 4 - TEST 2: variable interpolation cannot be escaped by \ - DOM structure ok ok 5 - TEST 3: $@, $a, etc. - DOM defined ok 6 - TEST 3: $@, $a, etc. - DOM structure ok ok t/mdom/gmake/misc.t ................. 1..2 ok 1 - TEST 1: empty makefile - DOM defined ok 2 - TEST 1: empty makefile - DOM structure ok ok t/mdom/gmake/order_only.t ........... 1..6 ok 1 - TEST 1: - DOM defined ok 2 - TEST 1: - DOM structure ok ok 3 - TEST 2: - DOM defined ok 4 - TEST 2: - DOM structure ok ok 5 - TEST 3: - DOM defined ok 6 - TEST 3: - DOM structure ok ok t/mdom/gmake/rule-simple.t .......... 1..22 ok 1 - TEST 1: "hello world" one-linner (with whitespace) - DOM defined ok 2 - TEST 1: "hello world" one-linner (with whitespace) - DOM structure ok ok 3 - TEST 2: "hello world" one-linner (without whitespace) - DOM defined ok 4 - TEST 2: "hello world" one-linner (without whitespace) - DOM structure ok ok 5 - TEST 3: "hello world" makefile - DOM defined ok 6 - TEST 3: "hello world" makefile - DOM structure ok ok 7 - TEST 4: multiple commands - DOM defined ok 8 - TEST 4: multiple commands - DOM structure ok ok 9 - TEST 5: simple rule with an empty command - DOM defined ok 10 - TEST 5: simple rule with an empty command - DOM structure ok ok 11 - TEST 6: simple rule without any commands - DOM defined ok 12 - TEST 6: simple rule without any commands - DOM structure ok ok 13 - TEST 7: weird target/prereq names - DOM defined ok 14 - TEST 7: weird target/prereq names - DOM structure ok ok 15 - TEST 8: line continuations in prereq list and weird target names - DOM defined ok 16 - TEST 8: line continuations in prereq list and weird target names - DOM structure ok ok 17 - TEST 9: line continuations in prereq list - DOM defined ok 18 - TEST 9: line continuations in prereq list - DOM structure ok ok 19 - TEST 10: suffix (-like) rules - DOM defined ok 20 - TEST 10: suffix (-like) rules - DOM structure ok ok 21 - TEST 11: special targets: - DOM defined ok 22 - TEST 11: special targets: - DOM structure ok ok t/mdom/gmake/rule-static-pattern.t .. 1..4 ok 1 - TEST 1: static pattern rules with ";" command - DOM defined ok 2 - TEST 1: static pattern rules with ";" command - DOM structure ok ok 3 - TEST 2: static pattern rules without ";" commands - DOM defined ok 4 - TEST 2: static pattern rules without ";" commands - DOM structure ok ok t/mdom/gmake/unknown.t .............. 1..2 ok 1 - TEST 1: unknown entities - DOM defined ok 2 - TEST 1: unknown entities - DOM structure ok ok t/mdom/node.t ....................... 1..49 ok 1 - use MDOM::Token; ok 2 - use MDOM::Node; ok 3 - $token's parent ok ok 4 - $token's prev sibling is empty ok 5 - $token's next sibling is empty too ok 6 - only 1 elem ok 7 - token truly added ok 8 - child 0 ok 9 - it is the first one ok 10 - ...and also the last ok 11 - $token2 not yet added ok 12 - $token2's parent ok ok 13 - $token2's prev sibling is $token ok 14 - no next sibling for $token2 ok 15 - 2 elements ok 16 - $token is the first one ok 17 - child 0 ok 18 - contains $token ok 19 - $token2 is the second one ok 20 - child 1 ok 21 - contains $token2 ok 22 - no third one ok 23 ok 24 ok 25 ok 26 - $token3 not yet added ok 27 - $token3's parent ok ok 28 - $token3's prev sibling is $token2 ok 29 - no next sibling for $token3 ok 30 - $token2's prev sibling is $token ok 31 - $token2's next sibling is $token3 ok 32 - 2 bare tokens ok 33 ok 34 - 2 bare tokens ok 35 ok 36 - find the first one ok 37 - find the second one ok 38 - only 1 whitespace found ok 39 - $token2 found ok 40 ok 41 ok 42 ok 43 ok 44 ok 45 ok 46 ok 47 - 2 elements ok 48 - child 0 ok 49 - child 1 ok t/mdom/rule-simple.t ................ 1..24 ok 1 - DOM tree okay - TEST 1: ok 2 - Assignment obj okay - TEST 1: ok 3 - targets array okay - TEST 1: ok 4 - targets calar okay - TEST 1: ok 5 - Assignment obj okay - TEST 1: ok 6 - prereqs array okay - TEST 1: ok 7 - prereqs calar okay - TEST 1: ok 8 - colon okay - TEST 1: ok 9 - DOM tree okay - TEST 2: ok 10 - Assignment obj okay - TEST 2: ok 11 - targets array okay - TEST 2: ok 12 - targets calar okay - TEST 2: ok 13 - Assignment obj okay - TEST 2: ok 14 - prereqs array okay - TEST 2: ok 15 - prereqs calar okay - TEST 2: ok 16 - colon okay - TEST 2: ok 17 - DOM tree okay - TEST 3: ok 18 - Assignment obj okay - TEST 3: ok 19 - targets array okay - TEST 3: ok 20 - targets calar okay - TEST 3: ok 21 - Assignment obj okay - TEST 3: ok 22 - prereqs array okay - TEST 3: ok 23 - prereqs calar okay - TEST 3: ok 24 - colon okay - TEST 3: ok t/mdom/token.t ...................... 1..26 ok 1 - use MDOM::Token; ok 2 - obj ok ok 3 - 'bare ok' isa 'MDOM::Token::Bare' ok 4 - 'token ok' isa 'MDOM::Token' ok 5 - stringify ok ok 6 - plain tokens are significant by default ok 7 - set/get_content ok ok 8 - add_content ok ok 9 - An object of class 'MDOM::Token::Whitespace' isa 'MDOM::Token::Whitespace' ok 10 - An object of class 'MDOM::Token::Whitespace' isa 'MDOM::Token' ok 11 - ws content ok ok 12 - ws is not significant ok 13 - An object of class 'MDOM::Token::Separator' isa 'MDOM::Token::Separator' ok 14 - An object of class 'MDOM::Token::Separator' isa 'MDOM::Token' ok 15 - sp content ok ok 16 - separators are significant ok 17 - An object of class 'MDOM::Token::Comment' isa 'MDOM::Token::Comment' ok 18 - An object of class 'MDOM::Token::Comment' isa 'MDOM::Token' ok 19 - cmt content ok ok 20 - cmt add_content ok ok 21 - comments are not significant ok 22 - An object of class 'MDOM::Token::Continuation' isa 'MDOM::Token::Continuation' ok 23 - An object of class 'MDOM::Token::Continuation' isa 'MDOM::Token' ok 24 ok 25 - line continuations are not significant ok 26 ok t/pod-coverage.t .................... skipped: Test::Pod::Coverage required for testing POD coverage t/pod.t ............................. skipped: Test::Pod required for testing POD All tests successful. Files=19, Tests=261, 1 wallclock secs ( 0.08 usr 0.00 sys + 0.98 cusr 0.08 csys = 1.14 CPU) Result: PASS make[1]: Leaving directory '/build/libmakefile-dom-perl-0.008' fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install make -j1 install DESTDIR=/build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/libmakefile-dom-perl-0.008' Manifying 20 pod documents Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/perl5/Makefile/DOM.pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/perl5/MDOM/Command.pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/perl5/MDOM/Dumper.pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/perl5/MDOM/Assignment.pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/perl5/MDOM/Unknown.pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/perl5/MDOM/Directive.pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/perl5/MDOM/Element.pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/perl5/MDOM/Rule.pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/perl5/MDOM/Document.pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/perl5/MDOM/Token.pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/perl5/MDOM/Node.pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/perl5/MDOM/Util.pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/perl5/MDOM/Token/Comment.pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/perl5/MDOM/Token/Separator.pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/perl5/MDOM/Token/Continuation.pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/perl5/MDOM/Token/Whitespace.pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/perl5/MDOM/Token/Bare.pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/perl5/MDOM/Token/Interpolation.pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/perl5/MDOM/Token/Modifier.pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/perl5/MDOM/Document/Gmake.pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/perl5/MDOM/Rule/StaticPattern.pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/perl5/MDOM/Rule/Simple.pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/man/man3/MDOM::Directive.3pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/man/man3/MDOM::Element.3pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/man/man3/MDOM::Node.3pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/man/man3/MDOM::Token::Comment.3pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/man/man3/MDOM::Command.3pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/man/man3/MDOM::Util.3pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/man/man3/MDOM::Rule::StaticPattern.3pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/man/man3/MDOM::Unknown.3pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/man/man3/MDOM::Token::Separator.3pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/man/man3/MDOM::Token::Interpolation.3pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/man/man3/MDOM::Token::Modifier.3pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/man/man3/MDOM::Dumper.3pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/man/man3/MDOM::Token::Whitespace.3pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/man/man3/MDOM::Rule.3pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/man/man3/MDOM::Token::Bare.3pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/man/man3/MDOM::Assignment.3pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/man/man3/MDOM::Document::Gmake.3pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/man/man3/Makefile::DOM.3pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/man/man3/MDOM::Rule::Simple.3pm Installing /build/libmakefile-dom-perl-0.008/debian/libmakefile-dom-perl/usr/share/man/man3/MDOM::Token.3pm make[1]: Leaving directory '/build/libmakefile-dom-perl-0.008' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libmakefile-dom-perl' in '../libmakefile-dom-perl_0.008-2_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libmakefile-dom-perl_0.008-2_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/40861 and its subdirectories I: Current time: Sat May 15 07:00:12 -12 2021 I: pbuilder-time-stamp: 1621105212