I: pbuilder: network access will be disabled during build I: Current time: Thu Jun 17 13:30:51 -12 2021 I: pbuilder-time-stamp: 1623979851 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [shadow_4.5-1.1.dsc] I: copying [./shadow_4.5.orig.tar.xz] I: copying [./shadow_4.5-1.1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Thu Jul 26 21:50:19 2018 -12 gpgv: using RSA key FAE1E5B64652BE798E278CC20BC47DC64D135306 gpgv: issuer "andreas@fatal.se" gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./shadow_4.5-1.1.dsc dpkg-source: info: extracting shadow in shadow-4.5 dpkg-source: info: unpacking shadow_4.5.orig.tar.xz dpkg-source: info: unpacking shadow_4.5-1.1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 503_shadowconfig.8 dpkg-source: info: applying 008_login_log_failure_in_FTMP dpkg-source: info: applying 429_login_FAILLOG_ENAB dpkg-source: info: applying 401_cppw_src.dpatch dpkg-source: info: applying 402_cppw_selinux dpkg-source: info: applying 506_relaxed_usernames dpkg-source: info: applying 542_useradd-O_option dpkg-source: info: applying 463_login_delay_obeys_to_PAM dpkg-source: info: applying 508_nologin_in_usr_sbin dpkg-source: info: applying 505_useradd_recommend_adduser dpkg-source: info: applying 501_commonio_group_shadow I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: dh-autoreconf, gettext, libpam0g-dev, debhelper (>= 10~), quilt, xsltproc, docbook-xsl, docbook-xml, libxml2-utils, cdbs, libselinux1-dev, libsemanage1-dev, gnome-doc-utils, bison, libaudit-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19234 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on dh-autoreconf; however: Package dh-autoreconf is not installed. pbuilder-satisfydepends-dummy depends on gettext; however: Package gettext is not installed. pbuilder-satisfydepends-dummy depends on libpam0g-dev; however: Package libpam0g-dev is not installed. pbuilder-satisfydepends-dummy depends on debhelper (>= 10~); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on quilt; however: Package quilt is not installed. pbuilder-satisfydepends-dummy depends on xsltproc; however: Package xsltproc is not installed. pbuilder-satisfydepends-dummy depends on docbook-xsl; however: Package docbook-xsl is not installed. pbuilder-satisfydepends-dummy depends on docbook-xml; however: Package docbook-xml is not installed. pbuilder-satisfydepends-dummy depends on libxml2-utils; however: Package libxml2-utils is not installed. pbuilder-satisfydepends-dummy depends on cdbs; however: Package cdbs is not installed. pbuilder-satisfydepends-dummy depends on libselinux1-dev; however: Package libselinux1-dev is not installed. pbuilder-satisfydepends-dummy depends on libsemanage1-dev; however: Package libsemanage1-dev is not installed. pbuilder-satisfydepends-dummy depends on gnome-doc-utils; however: Package gnome-doc-utils is not installed. pbuilder-satisfydepends-dummy depends on bison; however: Package bison is not installed. pbuilder-satisfydepends-dummy depends on libaudit-dev; however: Package libaudit-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bison{a} bsdmainutils{a} cdbs{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} diffstat{a} docbook-xml{a} docbook-xsl{a} dwz{a} file{a} gettext{a} gettext-base{a} gnome-doc-utils{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libaudit-dev{a} libbison-dev{a} libbsd0{a} libbz2-dev{a} libcap-ng-dev{a} libcroco3{a} libelf1{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libncurses6{a} libpam0g-dev{a} libpcre16-3{a} libpcre3-dev{a} libpcre32-3{a} libpcrecpp0v5{a} libpipeline1{a} libpython-stdlib{a} libpython2-stdlib{a} libpython2.7{a} libpython2.7-minimal{a} libpython2.7-stdlib{a} libreadline7{a} libselinux1-dev{a} libsemanage1-dev{a} libsepol1-dev{a} libsigsegv2{a} libssl1.1{a} libtool{a} libuchardet0{a} libxml2{a} libxml2-utils{a} libxslt1.1{a} m4{a} man-db{a} mime-support{a} po-debconf{a} python{a} python-libxml2{a} python-minimal{a} python2{a} python2-minimal{a} python2.7{a} python2.7-minimal{a} quilt{a} readline-common{a} sensible-utils{a} sgml-base{a} sgml-data{a} xml-core{a} xsltproc{a} The following packages are RECOMMENDED but will NOT be installed: bzip2-doc curl less libarchive-cpio-perl libglib2.0-data libgpm2 libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 75 newly installed, 0 to remove and 0 not upgraded. Need to get 33.2 MB of archives. After unpacking 132 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main i386 libbsd0 i386 0.9.1-2 [104 kB] Get: 2 http://deb.debian.org/debian buster/main i386 bsdmainutils i386 11.1.2+b1 [193 kB] Get: 3 http://deb.debian.org/debian buster/main i386 libuchardet0 i386 0.0.6-3 [65.2 kB] Get: 4 http://deb.debian.org/debian buster/main i386 groff-base i386 1.22.4-3 [935 kB] Get: 5 http://deb.debian.org/debian buster/main i386 libpipeline1 i386 1.5.1-2 [33.3 kB] Get: 6 http://deb.debian.org/debian buster/main i386 man-db i386 2.8.5-2 [1284 kB] Get: 7 http://deb.debian.org/debian buster/main i386 libpython2.7-minimal i386 2.7.16-2+deb10u1 [395 kB] Get: 8 http://deb.debian.org/debian buster/main i386 python2.7-minimal i386 2.7.16-2+deb10u1 [1381 kB] Get: 9 http://deb.debian.org/debian buster/main i386 python2-minimal i386 2.7.16-1 [41.4 kB] Get: 10 http://deb.debian.org/debian buster/main i386 python-minimal i386 2.7.16-1 [21.0 kB] Get: 11 http://deb.debian.org/debian buster/main i386 libssl1.1 i386 1.1.1d-0+deb10u3 [1537 kB] Get: 12 http://deb.debian.org/debian buster/main i386 mime-support all 3.62 [37.2 kB] Get: 13 http://deb.debian.org/debian buster/main i386 libexpat1 i386 2.2.6-2+deb10u1 [104 kB] Get: 14 http://deb.debian.org/debian buster/main i386 readline-common all 7.0-5 [70.6 kB] Get: 15 http://deb.debian.org/debian buster/main i386 libreadline7 i386 7.0-5 [156 kB] Get: 16 http://deb.debian.org/debian buster/main i386 libpython2.7-stdlib i386 2.7.16-2+deb10u1 [1934 kB] Get: 17 http://deb.debian.org/debian buster/main i386 python2.7 i386 2.7.16-2+deb10u1 [305 kB] Get: 18 http://deb.debian.org/debian buster/main i386 libpython2-stdlib i386 2.7.16-1 [20.8 kB] Get: 19 http://deb.debian.org/debian buster/main i386 libpython-stdlib i386 2.7.16-1 [20.8 kB] Get: 20 http://deb.debian.org/debian buster/main i386 python2 i386 2.7.16-1 [41.6 kB] Get: 21 http://deb.debian.org/debian buster/main i386 python i386 2.7.16-1 [22.8 kB] Get: 22 http://deb.debian.org/debian buster/main i386 sgml-base all 1.29 [14.8 kB] Get: 23 http://deb.debian.org/debian buster/main i386 sensible-utils all 0.0.12 [15.8 kB] Get: 24 http://deb.debian.org/debian buster/main i386 libmagic-mgc i386 1:5.35-4+deb10u1 [242 kB] Get: 25 http://deb.debian.org/debian buster/main i386 libmagic1 i386 1:5.35-4+deb10u1 [124 kB] Get: 26 http://deb.debian.org/debian buster/main i386 file i386 1:5.35-4+deb10u1 [66.3 kB] Get: 27 http://deb.debian.org/debian buster/main i386 gettext-base i386 0.19.8.1-9 [124 kB] Get: 28 http://deb.debian.org/debian buster/main i386 libsigsegv2 i386 2.12-2 [33.2 kB] Get: 29 http://deb.debian.org/debian buster/main i386 m4 i386 1.4.18-2 [205 kB] Get: 30 http://deb.debian.org/debian buster/main i386 autoconf all 2.69-11 [341 kB] Get: 31 http://deb.debian.org/debian buster/main i386 autotools-dev all 20180224.1 [77.0 kB] Get: 32 http://deb.debian.org/debian buster/main i386 automake all 1:1.16.1-4 [771 kB] Get: 33 http://deb.debian.org/debian buster/main i386 autopoint all 0.19.8.1-9 [434 kB] Get: 34 http://deb.debian.org/debian buster/main i386 libbison-dev i386 2:3.3.2.dfsg-1 [500 kB] Get: 35 http://deb.debian.org/debian buster/main i386 bison i386 2:3.3.2.dfsg-1 [877 kB] Get: 36 http://deb.debian.org/debian buster/main i386 cdbs all 0.4.159 [83.7 kB] Get: 37 http://deb.debian.org/debian buster/main i386 libtool all 2.4.6-9 [547 kB] Get: 38 http://deb.debian.org/debian buster/main i386 dh-autoreconf all 19 [16.9 kB] Get: 39 http://deb.debian.org/debian buster/main i386 libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 40 http://deb.debian.org/debian buster/main i386 libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 41 http://deb.debian.org/debian buster/main i386 dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 42 http://deb.debian.org/debian buster/main i386 libelf1 i386 0.176-1.1 [166 kB] Get: 43 http://deb.debian.org/debian buster/main i386 dwz i386 0.12-3 [81.4 kB] Get: 44 http://deb.debian.org/debian buster/main i386 libglib2.0-0 i386 2.58.3-2+deb10u2 [1334 kB] Get: 45 http://deb.debian.org/debian buster/main i386 libicu63 i386 63.1-6+deb10u1 [8451 kB] Get: 46 http://deb.debian.org/debian buster/main i386 libxml2 i386 2.9.4+dfsg1-7+b3 [721 kB] Get: 47 http://deb.debian.org/debian buster/main i386 libcroco3 i386 0.6.12-3 [151 kB] Get: 48 http://deb.debian.org/debian buster/main i386 libncurses6 i386 6.1+20181013-2+deb10u2 [109 kB] Get: 49 http://deb.debian.org/debian buster/main i386 gettext i386 0.19.8.1-9 [1314 kB] Get: 50 http://deb.debian.org/debian buster/main i386 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 51 http://deb.debian.org/debian buster/main i386 po-debconf all 1.0.21 [248 kB] Get: 52 http://deb.debian.org/debian buster/main i386 debhelper all 12.1.1 [1016 kB] Get: 53 http://deb.debian.org/debian buster/main i386 diffstat i386 1.62-1 [34.0 kB] Get: 54 http://deb.debian.org/debian buster/main i386 xml-core all 0.18+nmu1 [23.8 kB] Get: 55 http://deb.debian.org/debian buster/main i386 sgml-data all 2.0.11 [179 kB] Get: 56 http://deb.debian.org/debian buster/main i386 docbook-xml all 4.5-8 [84.7 kB] Get: 57 http://deb.debian.org/debian buster/main i386 docbook-xsl all 1.79.1+dfsg-2 [1249 kB] Get: 58 http://deb.debian.org/debian buster/main i386 libpython2.7 i386 2.7.16-2+deb10u1 [1059 kB] Get: 59 http://deb.debian.org/debian buster/main i386 python-libxml2 i386 2.9.4+dfsg1-7+b3 [204 kB] Get: 60 http://deb.debian.org/debian buster/main i386 libxml2-utils i386 2.9.4+dfsg1-7+b3 [100 kB] Get: 61 http://deb.debian.org/debian buster/main i386 libxslt1.1 i386 1.1.32-2.2~deb10u1 [248 kB] Get: 62 http://deb.debian.org/debian buster/main i386 xsltproc i386 1.1.32-2.2~deb10u1 [122 kB] Get: 63 http://deb.debian.org/debian buster/main i386 gnome-doc-utils all 0.20.10-5 [335 kB] Get: 64 http://deb.debian.org/debian buster/main i386 libcap-ng-dev i386 0.7.9-2 [26.6 kB] Get: 65 http://deb.debian.org/debian buster/main i386 libaudit-dev i386 1:2.8.4-3 [88.8 kB] Get: 66 http://deb.debian.org/debian buster/main i386 libbz2-dev i386 1.0.6-9.2~deb10u1 [31.2 kB] Get: 67 http://deb.debian.org/debian buster/main i386 libpam0g-dev i386 1.3.1-5 [190 kB] Get: 68 http://deb.debian.org/debian buster/main i386 libpcre16-3 i386 2:8.39-12 [258 kB] Get: 69 http://deb.debian.org/debian buster/main i386 libpcre32-3 i386 2:8.39-12 [250 kB] Get: 70 http://deb.debian.org/debian buster/main i386 libpcrecpp0v5 i386 2:8.39-12 [153 kB] Get: 71 http://deb.debian.org/debian buster/main i386 libpcre3-dev i386 2:8.39-12 [656 kB] Get: 72 http://deb.debian.org/debian buster/main i386 libsepol1-dev i386 2.8-1 [370 kB] Get: 73 http://deb.debian.org/debian buster/main i386 libselinux1-dev i386 2.8-1+b1 [177 kB] Get: 74 http://deb.debian.org/debian buster/main i386 libsemanage1-dev i386 2.8-2 [144 kB] Get: 75 http://deb.debian.org/debian buster/main i386 quilt all 0.65-3 [318 kB] Fetched 33.2 MB in 1s (28.9 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:i386. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19234 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_i386.deb ... Unpacking libbsd0:i386 (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_i386.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../02-libuchardet0_0.0.6-3_i386.deb ... Unpacking libuchardet0:i386 (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_i386.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../04-libpipeline1_1.5.1-2_i386.deb ... Unpacking libpipeline1:i386 (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_i386.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package libpython2.7-minimal:i386. Preparing to unpack .../06-libpython2.7-minimal_2.7.16-2+deb10u1_i386.deb ... Unpacking libpython2.7-minimal:i386 (2.7.16-2+deb10u1) ... Selecting previously unselected package python2.7-minimal. Preparing to unpack .../07-python2.7-minimal_2.7.16-2+deb10u1_i386.deb ... Unpacking python2.7-minimal (2.7.16-2+deb10u1) ... Selecting previously unselected package python2-minimal. Preparing to unpack .../08-python2-minimal_2.7.16-1_i386.deb ... Unpacking python2-minimal (2.7.16-1) ... Selecting previously unselected package python-minimal. Preparing to unpack .../09-python-minimal_2.7.16-1_i386.deb ... Unpacking python-minimal (2.7.16-1) ... Selecting previously unselected package libssl1.1:i386. Preparing to unpack .../10-libssl1.1_1.1.1d-0+deb10u3_i386.deb ... Unpacking libssl1.1:i386 (1.1.1d-0+deb10u3) ... Selecting previously unselected package mime-support. Preparing to unpack .../11-mime-support_3.62_all.deb ... Unpacking mime-support (3.62) ... Selecting previously unselected package libexpat1:i386. Preparing to unpack .../12-libexpat1_2.2.6-2+deb10u1_i386.deb ... Unpacking libexpat1:i386 (2.2.6-2+deb10u1) ... Selecting previously unselected package readline-common. Preparing to unpack .../13-readline-common_7.0-5_all.deb ... Unpacking readline-common (7.0-5) ... Selecting previously unselected package libreadline7:i386. Preparing to unpack .../14-libreadline7_7.0-5_i386.deb ... Unpacking libreadline7:i386 (7.0-5) ... Selecting previously unselected package libpython2.7-stdlib:i386. Preparing to unpack .../15-libpython2.7-stdlib_2.7.16-2+deb10u1_i386.deb ... Unpacking libpython2.7-stdlib:i386 (2.7.16-2+deb10u1) ... Selecting previously unselected package python2.7. Preparing to unpack .../16-python2.7_2.7.16-2+deb10u1_i386.deb ... Unpacking python2.7 (2.7.16-2+deb10u1) ... Selecting previously unselected package libpython2-stdlib:i386. Preparing to unpack .../17-libpython2-stdlib_2.7.16-1_i386.deb ... Unpacking libpython2-stdlib:i386 (2.7.16-1) ... Selecting previously unselected package libpython-stdlib:i386. Preparing to unpack .../18-libpython-stdlib_2.7.16-1_i386.deb ... Unpacking libpython-stdlib:i386 (2.7.16-1) ... Setting up libpython2.7-minimal:i386 (2.7.16-2+deb10u1) ... Setting up python2.7-minimal (2.7.16-2+deb10u1) ... Setting up python2-minimal (2.7.16-1) ... Selecting previously unselected package python2. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20699 files and directories currently installed.) Preparing to unpack .../python2_2.7.16-1_i386.deb ... Unpacking python2 (2.7.16-1) ... Setting up python-minimal (2.7.16-1) ... Selecting previously unselected package python. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20732 files and directories currently installed.) Preparing to unpack .../00-python_2.7.16-1_i386.deb ... Unpacking python (2.7.16-1) ... Selecting previously unselected package sgml-base. Preparing to unpack .../01-sgml-base_1.29_all.deb ... Unpacking sgml-base (1.29) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../02-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../03-libmagic-mgc_1%3a5.35-4+deb10u1_i386.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:i386. Preparing to unpack .../04-libmagic1_1%3a5.35-4+deb10u1_i386.deb ... Unpacking libmagic1:i386 (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../05-file_1%3a5.35-4+deb10u1_i386.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../06-gettext-base_0.19.8.1-9_i386.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:i386. Preparing to unpack .../07-libsigsegv2_2.12-2_i386.deb ... Unpacking libsigsegv2:i386 (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../08-m4_1.4.18-2_i386.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../09-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../10-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../11-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../12-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libbison-dev:i386. Preparing to unpack .../13-libbison-dev_2%3a3.3.2.dfsg-1_i386.deb ... Unpacking libbison-dev:i386 (2:3.3.2.dfsg-1) ... Selecting previously unselected package bison. Preparing to unpack .../14-bison_2%3a3.3.2.dfsg-1_i386.deb ... Unpacking bison (2:3.3.2.dfsg-1) ... Selecting previously unselected package cdbs. Preparing to unpack .../15-cdbs_0.4.159_all.deb ... Unpacking cdbs (0.4.159) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:i386. Preparing to unpack .../21-libelf1_0.176-1.1_i386.deb ... Unpacking libelf1:i386 (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.12-3_i386.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:i386. Preparing to unpack .../23-libglib2.0-0_2.58.3-2+deb10u2_i386.deb ... Unpacking libglib2.0-0:i386 (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:i386. Preparing to unpack .../24-libicu63_63.1-6+deb10u1_i386.deb ... Unpacking libicu63:i386 (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../25-libxml2_2.9.4+dfsg1-7+b3_i386.deb ... Unpacking libxml2:i386 (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:i386. Preparing to unpack .../26-libcroco3_0.6.12-3_i386.deb ... Unpacking libcroco3:i386 (0.6.12-3) ... Selecting previously unselected package libncurses6:i386. Preparing to unpack .../27-libncurses6_6.1+20181013-2+deb10u2_i386.deb ... Unpacking libncurses6:i386 (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../28-gettext_0.19.8.1-9_i386.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../29-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../30-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../31-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package diffstat. Preparing to unpack .../32-diffstat_1.62-1_i386.deb ... Unpacking diffstat (1.62-1) ... Selecting previously unselected package xml-core. Preparing to unpack .../33-xml-core_0.18+nmu1_all.deb ... Unpacking xml-core (0.18+nmu1) ... Selecting previously unselected package sgml-data. Preparing to unpack .../34-sgml-data_2.0.11_all.deb ... Unpacking sgml-data (2.0.11) ... Selecting previously unselected package docbook-xml. Preparing to unpack .../35-docbook-xml_4.5-8_all.deb ... Unpacking docbook-xml (4.5-8) ... Selecting previously unselected package docbook-xsl. Preparing to unpack .../36-docbook-xsl_1.79.1+dfsg-2_all.deb ... Unpacking docbook-xsl (1.79.1+dfsg-2) ... Selecting previously unselected package libpython2.7:i386. Preparing to unpack .../37-libpython2.7_2.7.16-2+deb10u1_i386.deb ... Unpacking libpython2.7:i386 (2.7.16-2+deb10u1) ... Selecting previously unselected package python-libxml2. Preparing to unpack .../38-python-libxml2_2.9.4+dfsg1-7+b3_i386.deb ... Unpacking python-libxml2 (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libxml2-utils. Preparing to unpack .../39-libxml2-utils_2.9.4+dfsg1-7+b3_i386.deb ... Unpacking libxml2-utils (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libxslt1.1:i386. Preparing to unpack .../40-libxslt1.1_1.1.32-2.2~deb10u1_i386.deb ... Unpacking libxslt1.1:i386 (1.1.32-2.2~deb10u1) ... Selecting previously unselected package xsltproc. Preparing to unpack .../41-xsltproc_1.1.32-2.2~deb10u1_i386.deb ... Unpacking xsltproc (1.1.32-2.2~deb10u1) ... Selecting previously unselected package gnome-doc-utils. Preparing to unpack .../42-gnome-doc-utils_0.20.10-5_all.deb ... Unpacking gnome-doc-utils (0.20.10-5) ... Selecting previously unselected package libcap-ng-dev. Preparing to unpack .../43-libcap-ng-dev_0.7.9-2_i386.deb ... Unpacking libcap-ng-dev (0.7.9-2) ... Selecting previously unselected package libaudit-dev:i386. Preparing to unpack .../44-libaudit-dev_1%3a2.8.4-3_i386.deb ... Unpacking libaudit-dev:i386 (1:2.8.4-3) ... Selecting previously unselected package libbz2-dev:i386. Preparing to unpack .../45-libbz2-dev_1.0.6-9.2~deb10u1_i386.deb ... Unpacking libbz2-dev:i386 (1.0.6-9.2~deb10u1) ... Selecting previously unselected package libpam0g-dev:i386. Preparing to unpack .../46-libpam0g-dev_1.3.1-5_i386.deb ... Unpacking libpam0g-dev:i386 (1.3.1-5) ... Selecting previously unselected package libpcre16-3:i386. Preparing to unpack .../47-libpcre16-3_2%3a8.39-12_i386.deb ... Unpacking libpcre16-3:i386 (2:8.39-12) ... Selecting previously unselected package libpcre32-3:i386. Preparing to unpack .../48-libpcre32-3_2%3a8.39-12_i386.deb ... Unpacking libpcre32-3:i386 (2:8.39-12) ... Selecting previously unselected package libpcrecpp0v5:i386. Preparing to unpack .../49-libpcrecpp0v5_2%3a8.39-12_i386.deb ... Unpacking libpcrecpp0v5:i386 (2:8.39-12) ... Selecting previously unselected package libpcre3-dev:i386. Preparing to unpack .../50-libpcre3-dev_2%3a8.39-12_i386.deb ... Unpacking libpcre3-dev:i386 (2:8.39-12) ... Selecting previously unselected package libsepol1-dev:i386. Preparing to unpack .../51-libsepol1-dev_2.8-1_i386.deb ... Unpacking libsepol1-dev:i386 (2.8-1) ... Selecting previously unselected package libselinux1-dev:i386. Preparing to unpack .../52-libselinux1-dev_2.8-1+b1_i386.deb ... Unpacking libselinux1-dev:i386 (2.8-1+b1) ... Selecting previously unselected package libsemanage1-dev. Preparing to unpack .../53-libsemanage1-dev_2.8-2_i386.deb ... Unpacking libsemanage1-dev (2.8-2) ... Selecting previously unselected package quilt. Preparing to unpack .../54-quilt_0.65-3_all.deb ... Unpacking quilt (0.65-3) ... Setting up libexpat1:i386 (2.2.6-2+deb10u1) ... Setting up libpcrecpp0v5:i386 (2:8.39-12) ... Setting up libpipeline1:i386 (1.5.1-2) ... Setting up mime-support (3.62) ... Setting up libpcre16-3:i386 (2:8.39-12) ... Setting up libbison-dev:i386 (2:3.3.2.dfsg-1) ... Setting up libpam0g-dev:i386 (1.3.1-5) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:i386 (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libssl1.1:i386 (1.1.1d-0+deb10u3) ... Setting up libmagic1:i386 (1:5.35-4+deb10u1) ... Setting up libsepol1-dev:i386 (2.8-1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libicu63:i386 (63.1-6+deb10u1) ... Setting up autotools-dev (20180224.1) ... Setting up libncurses6:i386 (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:i386 (2.12-2) ... Setting up diffstat (1.62-1) ... Setting up libpcre32-3:i386 (2:8.39-12) ... Setting up autopoint (0.19.8.1-9) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:i386 (0.0.6-3) ... Setting up libcap-ng-dev (0.7.9-2) ... Setting up sgml-base (1.29) ... Setting up libbsd0:i386 (0.9.1-2) ... Setting up cdbs (0.4.159) ... Setting up libelf1:i386 (0.176-1.1) ... Setting up readline-common (7.0-5) ... Setting up libxml2:i386 (2.9.4+dfsg1-7+b3) ... Setting up libreadline7:i386 (7.0-5) ... Setting up libbz2-dev:i386 (1.0.6-9.2~deb10u1) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libtool (2.4.6-9) ... Setting up libpcre3-dev:i386 (2:8.39-12) ... Setting up libaudit-dev:i386 (1:2.8.4-3) ... Setting up m4 (1.4.18-2) ... Setting up libpython2.7-stdlib:i386 (2.7.16-2+deb10u1) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:i386 (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up xml-core (0.18+nmu1) ... Setting up libxslt1.1:i386 (1.1.32-2.2~deb10u1) ... Setting up bison (2:3.3.2.dfsg-1) ... update-alternatives: using /usr/bin/bison.yacc to provide /usr/bin/yacc (yacc) in auto mode Setting up libxml2-utils (2.9.4+dfsg1-7+b3) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libpython2.7:i386 (2.7.16-2+deb10u1) ... Setting up gettext (0.19.8.1-9) ... Setting up python2.7 (2.7.16-2+deb10u1) ... Setting up libpython2-stdlib:i386 (2.7.16-1) ... Setting up libselinux1-dev:i386 (2.8-1+b1) ... Setting up xsltproc (1.1.32-2.2~deb10u1) ... Setting up quilt (0.65-3) ... Setting up libsemanage1-dev (2.8-2) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up python2 (2.7.16-1) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up libpython-stdlib:i386 (2.7.16-1) ... Setting up python (2.7.16-1) ... Setting up po-debconf (1.0.21) ... Setting up python-libxml2 (2.9.4+dfsg1-7+b3) ... Setting up gnome-doc-utils (0.20.10-5) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Setting up debhelper (12.1.1) ... Processing triggers for libc-bin (2.28-10) ... Processing triggers for sgml-base (1.29) ... Setting up sgml-data (2.0.11) ... Setting up docbook-xsl (1.79.1+dfsg-2) ... Processing triggers for sgml-base (1.29) ... Setting up docbook-xml (4.5-8) ... Processing triggers for sgml-base (1.29) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/shadow-4.5/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package shadow dpkg-buildpackage: info: source version 1:4.5-1.1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Andreas Henriksson dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 fakeroot debian/rules clean test -x debian/rules rm -f debian/stamp-makefile-build debian/stamp-makefile-install /usr/bin/make -C . -k distclean make[1]: Entering directory '/build/shadow-4.5' make[1]: *** No rule to make target 'distclean'. make[1]: Leaving directory '/build/shadow-4.5' make: [/usr/share/cdbs/1/class/makefile.mk:91: makefile-clean] Error 2 (ignored) rm -f debian/stamp-autotools rmdir --ignore-fail-on-non-empty . rmdir: failed to remove '.': Invalid argument make: [/usr/share/cdbs/1/class/autotools.mk:64: makefile-clean] Error 1 (ignored) if test -e debian/autoreconf.before; then \ dh_autoreconf_clean ; \ fi dh_clean rm -f debian/stamp-autotools-files sed -i 's/# Linux only # //' debian/login.pam debian/rules build test -x debian/rules mkdir -p "." dh_autoreconf Copying file ABOUT-NLS Copying file config.rpath Creating directory m4 Copying file m4/codeset.m4 Copying file m4/gettext.m4 Copying file m4/glibc2.m4 Copying file m4/glibc21.m4 Copying file m4/iconv.m4 Copying file m4/intdiv0.m4 Copying file m4/intl.m4 Copying file m4/intldir.m4 Copying file m4/intmax.m4 Copying file m4/inttypes-pri.m4 Copying file m4/inttypes_h.m4 Copying file m4/lcmessage.m4 Copying file m4/lib-ld.m4 Copying file m4/lib-link.m4 Copying file m4/lib-prefix.m4 Copying file m4/lock.m4 Copying file m4/longdouble.m4 Copying file m4/longlong.m4 Copying file m4/nls.m4 Copying file m4/po.m4 Copying file m4/printf-posix.m4 Copying file m4/progtest.m4 Copying file m4/size_max.m4 Copying file m4/stdint_h.m4 Copying file m4/uintmax_t.m4 Copying file m4/ulonglong.m4 Copying file m4/visibility.m4 Copying file m4/wchar_t.m4 Copying file m4/wint_t.m4 Copying file m4/xsize.m4 Copying file po/Makefile.in.in Copying file po/Makevars.template Copying file po/Rules-quot Copying file po/boldquot.sed Copying file po/en@boldquot.header Copying file po/en@quot.header Copying file po/insert-header.sin Copying file po/quot.sed Copying file po/remove-potcdate.sin libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, libtoolize: and rerunning libtoolize and aclocal. libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am. configure.ac:13: installing './compile' configure.ac:25: installing './config.guess' configure.ac:25: installing './config.sub' configure.ac:5: installing './install-sh' configure.ac:5: installing './missing' lib/Makefile.am: installing './depcomp' configure.ac: installing './ylwrap' touch debian/stamp-autotools-files chmod a+x /build/shadow-4.5/./configure mkdir -p . cd . && CFLAGS="-g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\\\"sensible-editor\\\"" CXXFLAGS="-g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security" CPPFLAGS="-Wdate-time -D_FORTIFY_SOURCE=2" LDFLAGS="-Wl,-z,relro -Wl,-z,now" /build/shadow-4.5/./configure --build=i686-linux-gnu --prefix=/usr --includedir="\${prefix}/include" --mandir="\${prefix}/share/man" --infodir="\${prefix}/share/info" --sysconfdir=/etc --localstatedir=/var --libexecdir="\${prefix}/lib/shadow" --srcdir=. --disable-maintainer-mode --disable-dependency-tracking --disable-silent-rules --disable-shared --without-libcrack --mandir=/usr/share/man --with-libpam --enable-shadowgrp --enable-man --disable-account-tools-setuid --with-group-name-max-length=32 --without-acl --without-attr --without-tcb SHELL=/bin/sh checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make supports the include directive... yes (GNU style) checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... none checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking dependency style of gcc... (cached) none checking for library containing strerror... none required checking whether ln -s works... yes checking for bison... bison -y checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking the maximum length of command line arguments... 1572864 checking how to convert i686-pc-linux-gnu file names to i686-pc-linux-gnu format... func_convert_file_noop checking how to convert i686-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... no checking whether to build static libraries... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for ANSI C header files... (cached) yes checking for sys/wait.h that is POSIX.1 compatible... yes checking for stdbool.h that conforms to C99... yes checking for _Bool... yes checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking for unistd.h... (cached) yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking utmp.h usability... yes checking utmp.h presence... yes checking for utmp.h... yes checking utmpx.h usability... yes checking utmpx.h presence... yes checking for utmpx.h... yes checking termios.h usability... yes checking termios.h presence... yes checking for termios.h... yes checking termio.h usability... yes checking termio.h presence... yes checking for termio.h... yes checking sgtty.h usability... yes checking sgtty.h presence... yes checking for sgtty.h... yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking paths.h usability... yes checking paths.h presence... yes checking for paths.h... yes checking utime.h usability... yes checking utime.h presence... yes checking for utime.h... yes checking ulimit.h usability... yes checking ulimit.h presence... yes checking for ulimit.h... yes checking sys/resource.h usability... yes checking sys/resource.h presence... yes checking for sys/resource.h... yes checking gshadow.h usability... yes checking gshadow.h presence... yes checking for gshadow.h... yes checking lastlog.h usability... yes checking lastlog.h presence... yes checking for lastlog.h... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking rpc/key_prot.h usability... yes checking rpc/key_prot.h presence... yes checking for rpc/key_prot.h... yes checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking acl/libacl.h usability... no checking acl/libacl.h presence... no checking for acl/libacl.h... no checking attr/libattr.h usability... no checking attr/libattr.h presence... no checking for attr/libattr.h... no checking attr/error_context.h usability... no checking attr/error_context.h presence... no checking for attr/error_context.h... no checking shadow.h usability... yes checking shadow.h presence... yes checking for shadow.h... yes checking for l64a... yes checking for fchmod... yes checking for fchown... yes checking for fsync... yes checking for futimes... yes checking for getgroups... yes checking for gethostname... yes checking for getspnam... yes checking for gettimeofday... yes checking for getusershell... yes checking for getutent... yes checking for initgroups... yes checking for lchown... yes checking for lckpwdf... yes checking for lstat... yes checking for lutimes... yes checking for memcpy... yes checking for memset... yes checking for setgroups... yes checking for sigaction... yes checking for strchr... yes checking for updwtmp... yes checking for updwtmpx... yes checking for innetgr... yes checking for getpwnam_r... yes checking for getpwuid_r... yes checking for getgrnam_r... yes checking for getgrgid_r... yes checking for getspnam_r... yes checking for getaddrinfo... yes checking for ruserok... yes checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... 64 checking for an ANSI C-conforming const... yes checking for uid_t in sys/types.h... yes checking for off_t... yes checking for pid_t... yes checking for mode_t... yes checking whether stat file-mode macros are broken... no checking for struct stat.st_rdev... yes checking for struct stat.st_atim... yes checking for struct stat.st_atimensec... no checking for struct stat.st_mtim... yes checking for struct stat.st_mtimensec... no checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for struct utmp.ut_type... yes checking for struct utmp.ut_id... yes checking for struct utmp.ut_name... yes checking for struct utmp.ut_user... yes checking for struct utmp.ut_host... yes checking for struct utmp.ut_syslen... no checking for struct utmp.ut_addr... yes checking for struct utmp.ut_addr_v6... yes checking for struct utmp.ut_time... yes checking for struct utmp.ut_xtime... yes checking for struct utmp.ut_tv... yes checking for struct utmpx.ut_name... no checking for struct utmpx.ut_host... yes checking for struct utmpx.ut_syslen... no checking for struct utmpx.ut_addr... no checking for struct utmpx.ut_addr_v6... yes checking for struct utmpx.ut_time... no checking for struct utmpx.ut_xtime... no checking for ll_host in struct lastlog... yes checking type of array argument to getgroups... gid_t checking return type of signal handlers... void checking for utime.h... (cached) yes checking whether utime accepts a null argument... yes checking for strftime... yes checking for mkdir... yes checking for putgrent... yes checking for putpwent... yes checking for putspent... yes checking for rename... yes checking for rmdir... yes checking for sgetgrent... no checking for sgetpwent... no checking for sgetspent... yes checking for snprintf... yes checking for strcasecmp... yes checking for strdup... yes checking for strerror... yes checking for strstr... yes checking for setpgrp... yes checking for working shadow group support... no checking location of shared mail directory... /var/mail checking location of user mail file... none checking location of utmp... /var/run checking location of faillog/lastlog/wtmp... /var/log checking location of the passwd program... /usr/bin checking for posix_spawn... yes checking for library containing inet_ntoa... none required checking for library containing socket... none required checking for library containing gethostbyname... none required checking for xsltproc... /usr/bin/xsltproc checking for XML catalog (/etc/xml/catalog)... found checking for xmlcatalog... /usr/bin/xmlcatalog checking for DocBook XML DTD V4.1.2 in XML catalog... found checking for DocBook XSL Stylesheets >= 1.70.1 in XML catalog... found checking size of uid_t... 4 checking size of gid_t... 4 checking for crypt in -lcrypt... yes checking libaudit.h usability... yes checking libaudit.h presence... yes checking for libaudit.h... yes checking whether AUDIT_ADD_USER is declared... yes checking whether AUDIT_DEL_USER is declared... yes checking whether AUDIT_ADD_GROUP is declared... yes checking whether AUDIT_DEL_GROUP is declared... yes checking for audit_log_acct_message in -laudit... yes checking selinux/selinux.h usability... yes checking selinux/selinux.h presence... yes checking for selinux/selinux.h... yes checking semanage/semanage.h usability... yes checking semanage/semanage.h presence... yes checking for semanage/semanage.h... yes checking for is_selinux_enabled in -lselinux... yes checking for semanage_connect in -lsemanage... yes checking for pam_start in -lpam... yes checking for openpam_ttyconv in -lpam... no checking for misc_conv in -lpam_misc... yes checking for security/openpam.h... no checking for security/pam_misc.h... yes checking whether PAM_ESTABLISH_CRED is declared... yes checking whether PAM_DELETE_CRED is declared... yes checking whether PAM_NEW_AUTHTOK_REQD is declared... yes checking whether PAM_DATA_SILENT is declared... yes checking for pam_fail_delay... yes checking use login and su access checking if PAM not used... no checking whether NLS is requested... yes checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyCurrent... no checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating po/Makefile.in config.status: creating doc/Makefile config.status: creating man/Makefile config.status: creating man/config.xml config.status: creating man/po/Makefile config.status: creating man/cs/Makefile config.status: creating man/da/Makefile config.status: creating man/de/Makefile config.status: creating man/es/Makefile config.status: creating man/fi/Makefile config.status: creating man/fr/Makefile config.status: creating man/hu/Makefile config.status: creating man/id/Makefile config.status: creating man/it/Makefile config.status: creating man/ja/Makefile config.status: creating man/ko/Makefile config.status: creating man/pl/Makefile config.status: creating man/pt_BR/Makefile config.status: creating man/ru/Makefile config.status: creating man/sv/Makefile config.status: creating man/tr/Makefile config.status: creating man/zh_CN/Makefile config.status: creating man/zh_TW/Makefile config.status: creating libmisc/Makefile config.status: creating lib/Makefile config.status: creating src/Makefile config.status: creating contrib/Makefile config.status: creating etc/Makefile config.status: creating etc/pam.d/Makefile config.status: creating shadow.spec config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile shadow will be compiled with the following features: auditing support: yes CrackLib support: no PAM support: yes suid account management tools: no SELinux support: yes ACL support: no Extended Attributes support: no tcb support (incomplete): no shadow group support: yes S/Key support: no SHA passwords encryption: yes nscd support: yes subordinate IDs support: yes touch debian/stamp-autotools /usr/bin/make -C . make[1]: Entering directory '/build/shadow-4.5' /usr/bin/make all-recursive make[2]: Entering directory '/build/shadow-4.5' Making all in po make[3]: Entering directory '/build/shadow-4.5/po' test ! -f ./shadow.pot || \ test -z "bs.gmo ca.gmo cs.gmo da.gmo de.gmo dz.gmo el.gmo es.gmo eu.gmo fi.gmo fr.gmo gl.gmo he.gmo hu.gmo id.gmo it.gmo ja.gmo kk.gmo km.gmo ko.gmo nb.gmo ne.gmo nl.gmo nn.gmo pl.gmo pt.gmo pt_BR.gmo ro.gmo ru.gmo sk.gmo sq.gmo sv.gmo tl.gmo tr.gmo uk.gmo vi.gmo zh_CN.gmo zh_TW.gmo" || /usr/bin/make bs.gmo ca.gmo cs.gmo da.gmo de.gmo dz.gmo el.gmo es.gmo eu.gmo fi.gmo fr.gmo gl.gmo he.gmo hu.gmo id.gmo it.gmo ja.gmo kk.gmo km.gmo ko.gmo nb.gmo ne.gmo nl.gmo nn.gmo pl.gmo pt.gmo pt_BR.gmo ro.gmo ru.gmo sk.gmo sq.gmo sv.gmo tl.gmo tr.gmo uk.gmo vi.gmo zh_CN.gmo zh_TW.gmo make[4]: Entering directory '/build/shadow-4.5/po' rm -f bs.gmo && /usr/bin/msgfmt -c --statistics -o bs.gmo bs.po 36 translated messages, 103 fuzzy translations, 450 untranslated messages. rm -f ca.gmo && /usr/bin/msgfmt -c --statistics -o ca.gmo ca.po 556 translated messages, 26 fuzzy translations, 7 untranslated messages. rm -f cs.gmo && /usr/bin/msgfmt -c --statistics -o cs.gmo cs.po 604 translated messages. rm -f da.gmo && /usr/bin/msgfmt -c --statistics -o da.gmo da.po da.po:20: warning: header field 'Language' still has the initial default value 556 translated messages, 26 fuzzy translations, 7 untranslated messages. rm -f de.gmo && /usr/bin/msgfmt -c --statistics -o de.gmo de.po 558 translated messages. rm -f dz.gmo && /usr/bin/msgfmt -c --statistics -o dz.gmo dz.po dz.po:7: warning: header field 'Language' still has the initial default value 209 translated messages, 179 fuzzy translations, 201 untranslated messages. rm -f el.gmo && /usr/bin/msgfmt -c --statistics -o el.gmo el.po 552 translated messages, 28 fuzzy translations, 9 untranslated messages. rm -f es.gmo && /usr/bin/msgfmt -c --statistics -o es.gmo es.po 499 translated messages, 47 fuzzy translations, 43 untranslated messages. rm -f eu.gmo && /usr/bin/msgfmt -c --statistics -o eu.gmo eu.po 422 translated messages, 86 fuzzy translations, 81 untranslated messages. rm -f fi.gmo && /usr/bin/msgfmt -c --statistics -o fi.gmo fi.po 211 translated messages, 179 fuzzy translations, 199 untranslated messages. rm -f fr.gmo && /usr/bin/msgfmt -c --statistics -o fr.gmo fr.po 1229 translated messages. rm -f gl.gmo && /usr/bin/msgfmt -c --statistics -o gl.gmo gl.po 210 translated messages, 180 fuzzy translations, 199 untranslated messages. rm -f he.gmo && /usr/bin/msgfmt -c --statistics -o he.gmo he.po 50 translated messages, 175 fuzzy translations, 364 untranslated messages. rm -f hu.gmo && /usr/bin/msgfmt -c --statistics -o hu.gmo hu.po 211 translated messages, 179 fuzzy translations, 199 untranslated messages. rm -f id.gmo && /usr/bin/msgfmt -c --statistics -o id.gmo id.po id.po:5: warning: header field 'Language' still has the initial default value 182 translated messages, 203 fuzzy translations, 204 untranslated messages. rm -f it.gmo && /usr/bin/msgfmt -c --statistics -o it.gmo it.po 230 translated messages, 188 fuzzy translations, 171 untranslated messages. rm -f ja.gmo && /usr/bin/msgfmt -c --statistics -o ja.gmo ja.po 558 translated messages, 24 fuzzy translations, 7 untranslated messages. rm -f kk.gmo && /usr/bin/msgfmt -c --statistics -o kk.gmo kk.po 589 translated messages. rm -f km.gmo && /usr/bin/msgfmt -c --statistics -o km.gmo km.po km.po:11: warning: header field 'Language' still has the initial default value 184 translated messages, 204 fuzzy translations, 201 untranslated messages. rm -f ko.gmo && /usr/bin/msgfmt -c --statistics -o ko.gmo ko.po 302 translated messages, 129 fuzzy translations, 158 untranslated messages. rm -f nb.gmo && /usr/bin/msgfmt -c --statistics -o nb.gmo nb.po 556 translated messages, 26 fuzzy translations, 7 untranslated messages. rm -f ne.gmo && /usr/bin/msgfmt -c --statistics -o ne.gmo ne.po 210 translated messages, 178 fuzzy translations, 201 untranslated messages. rm -f nl.gmo && /usr/bin/msgfmt -c --statistics -o nl.gmo nl.po nl.po:7: warning: header field 'Language' still has the initial default value 558 translated messages. rm -f nn.gmo && /usr/bin/msgfmt -c --statistics -o nn.gmo nn.po nn.po:6: warning: header field 'Language' still has the initial default value 147 translated messages, 215 fuzzy translations, 227 untranslated messages. rm -f pl.gmo && /usr/bin/msgfmt -c --statistics -o pl.gmo pl.po 211 translated messages, 179 fuzzy translations, 199 untranslated messages. rm -f pt.gmo && /usr/bin/msgfmt -c --statistics -o pt.gmo pt.po 556 translated messages, 26 fuzzy translations, 7 untranslated messages. rm -f pt_BR.gmo && /usr/bin/msgfmt -c --statistics -o pt_BR.gmo pt_BR.po pt_BR.po:6: warning: header field 'Language' still has the initial default value 500 translated messages, 46 fuzzy translations, 43 untranslated messages. rm -f ro.gmo && /usr/bin/msgfmt -c --statistics -o ro.gmo ro.po 210 translated messages, 178 fuzzy translations, 201 untranslated messages. rm -f ru.gmo && /usr/bin/msgfmt -c --statistics -o ru.gmo ru.po 589 translated messages. rm -f sk.gmo && /usr/bin/msgfmt -c --statistics -o sk.gmo sk.po 388 translated messages, 92 fuzzy translations, 109 untranslated messages. rm -f sq.gmo && /usr/bin/msgfmt -c --statistics -o sq.gmo sq.po 7 translated messages, 79 fuzzy translations, 503 untranslated messages. rm -f sv.gmo && /usr/bin/msgfmt -c --statistics -o sv.gmo sv.po 486 translated messages, 44 fuzzy translations, 59 untranslated messages. rm -f tl.gmo && /usr/bin/msgfmt -c --statistics -o tl.gmo tl.po 210 translated messages, 180 fuzzy translations, 199 untranslated messages. rm -f tr.gmo && /usr/bin/msgfmt -c --statistics -o tr.gmo tr.po tr.po:8: warning: header field 'Language' still has the initial default value 230 translated messages, 196 fuzzy translations, 163 untranslated messages. rm -f uk.gmo && /usr/bin/msgfmt -c --statistics -o uk.gmo uk.po uk.po:8: warning: header field 'Language' still has the initial default value 211 translated messages, 179 fuzzy translations, 199 untranslated messages. rm -f vi.gmo && /usr/bin/msgfmt -c --statistics -o vi.gmo vi.po 589 translated messages. rm -f zh_CN.gmo && /usr/bin/msgfmt -c --statistics -o zh_CN.gmo zh_CN.po zh_CN.po:9: warning: header field 'Language' still has the initial default value 550 translated messages, 28 fuzzy translations, 11 untranslated messages. rm -f zh_TW.gmo && /usr/bin/msgfmt -c --statistics -o zh_TW.gmo zh_TW.po 160 translated messages, 208 fuzzy translations, 221 untranslated messages. make[4]: Leaving directory '/build/shadow-4.5/po' touch stamp-po make[3]: Leaving directory '/build/shadow-4.5/po' Making all in man make[3]: Entering directory '/build/shadow-4.5/man' echo "# This file is generated" > generate_mans.deps awk 'BEGIN{FS="\"";} /^$/{ f=FILENAME; sub(/.xml/,"",f); print "man" substr(f, length (f)) "/" f ": " $2 }' chage.1.xml chfn.1.xml chgpasswd.8.xml chpasswd.8.xml chsh.1.xml expiry.1.xml faillog.5.xml faillog.8.xml gpasswd.1.xml groupadd.8.xml groupdel.8.xml groupmems.8.xml groupmod.8.xml groups.1.xml grpck.8.xml gshadow.5.xml lastlog.8.xml limits.5.xml login.1.xml login.access.5.xml login.defs.5.xml logoutd.8.xml newgidmap.1.xml newgrp.1.xml newuidmap.1.xml newusers.8.xml nologin.8.xml passwd.1.xml passwd.5.xml porttime.5.xml pwck.8.xml pwconv.8.xml shadow.3.xml shadow.5.xml sg.1.xml su.1.xml suauth.5.xml subgid.5.xml subuid.5.xml useradd.8.xml userdel.8.xml usermod.8.xml vipw.8.xml >> generate_mans.deps Making all in po make[4]: Entering directory '/build/shadow-4.5/man/po' touch stamp-po make[4]: Leaving directory '/build/shadow-4.5/man/po' Making all in cs make[4]: Entering directory '/build/shadow-4.5/man/cs' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/shadow-4.5/man/cs' Making all in da make[4]: Entering directory '/build/shadow-4.5/man/da' /usr/bin/make -C .. config.xml make[5]: Entering directory '/build/shadow-4.5/man' make[5]: 'config.xml' is up to date. make[5]: Leaving directory '/build/shadow-4.5/man' cp ../config.xml config.xml xml2po --expand-all-entities -l da -p ../po/da.po -o chfn.1.xml ../chfn.1.xml sed -i 's:\(^:\1 lang="da">:' chfn.1.xml if grep -q SHADOW-CONFIG-HERE chfn.1.xml; then \ sed -e 's/^/%config;/' chfn.1.xml > chfn.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chfn.1.xml > chfn.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chfn.1.xml-config Note: Writing man1/chfn.1 xml2po --expand-all-entities -l da -p ../po/da.po -o groupdel.8.xml ../groupdel.8.xml sed -i 's:\(^:\1 lang="da">:' groupdel.8.xml if grep -q SHADOW-CONFIG-HERE groupdel.8.xml; then \ sed -e 's/^/%config;/' groupdel.8.xml > groupdel.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupdel.8.xml > groupdel.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupdel.8.xml-config Note: Writing man8/groupdel.8 xml2po --expand-all-entities -l da -p ../po/da.po -o groups.1.xml ../groups.1.xml sed -i 's:\(^:\1 lang="da">:' groups.1.xml if grep -q SHADOW-CONFIG-HERE groups.1.xml; then \ sed -e 's/^/%config;/' groups.1.xml > groups.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groups.1.xml > groups.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groups.1.xml-config Note: Writing man1/groups.1 xml2po --expand-all-entities -l da -p ../po/da.po -o gshadow.5.xml ../gshadow.5.xml sed -i 's:\(^:\1 lang="da">:' gshadow.5.xml if grep -q SHADOW-CONFIG-HERE gshadow.5.xml; then \ sed -e 's/^/%config;/' gshadow.5.xml > gshadow.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' gshadow.5.xml > gshadow.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl gshadow.5.xml-config Note: Writing man5/gshadow.5 xml2po --expand-all-entities -l da -p ../po/da.po -o logoutd.8.xml ../logoutd.8.xml sed -i 's:\(^:\1 lang="da">:' logoutd.8.xml if grep -q SHADOW-CONFIG-HERE logoutd.8.xml; then \ sed -e 's/^/%config;/' logoutd.8.xml > logoutd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' logoutd.8.xml > logoutd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl logoutd.8.xml-config Note: Writing man8/logoutd.8 xml2po --expand-all-entities -l da -p ../po/da.po -o newgrp.1.xml ../newgrp.1.xml sed -i 's:\(^:\1 lang="da">:' newgrp.1.xml if grep -q SHADOW-CONFIG-HERE newgrp.1.xml; then \ sed -e 's/^/%config;/' newgrp.1.xml > newgrp.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' newgrp.1.xml > newgrp.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl newgrp.1.xml-config Note: Writing man1/newgrp.1 xml2po --expand-all-entities -l da -p ../po/da.po -o nologin.8.xml ../nologin.8.xml sed -i 's:\(^:\1 lang="da">:' nologin.8.xml if grep -q SHADOW-CONFIG-HERE nologin.8.xml; then \ sed -e 's/^/%config;/' nologin.8.xml > nologin.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' nologin.8.xml > nologin.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl nologin.8.xml-config Note: Writing man8/nologin.8 xml2po --expand-all-entities -l da -p ../po/da.po -o sg.1.xml ../sg.1.xml sed -i 's:\(^:\1 lang="da">:' sg.1.xml if grep -q SHADOW-CONFIG-HERE sg.1.xml; then \ sed -e 's/^/%config;/' sg.1.xml > sg.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' sg.1.xml > sg.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl sg.1.xml-config Note: Writing man1/sg.1 xml2po --expand-all-entities -l da -p ../po/da.po -o vipw.8.xml ../vipw.8.xml sed -i 's:\(^:\1 lang="da">:' vipw.8.xml if grep -q SHADOW-CONFIG-HERE vipw.8.xml; then \ sed -e 's/^/%config;/' vipw.8.xml > vipw.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' vipw.8.xml > vipw.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl vipw.8.xml-config Note: Writing man8/vipw.8 Note: Writing man8/vigr.8 (soelim stub) rm sg.1.xml logoutd.8.xml vipw.8.xml groupdel.8.xml-config newgrp.1.xml gshadow.5.xml chfn.1.xml-config sg.1.xml-config logoutd.8.xml-config nologin.8.xml newgrp.1.xml-config gshadow.5.xml-config groupdel.8.xml vipw.8.xml-config groups.1.xml nologin.8.xml-config groups.1.xml-config chfn.1.xml make[4]: Leaving directory '/build/shadow-4.5/man/da' Making all in de make[4]: Entering directory '/build/shadow-4.5/man/de' /usr/bin/make -C .. config.xml make[5]: Entering directory '/build/shadow-4.5/man' make[5]: 'config.xml' is up to date. make[5]: Leaving directory '/build/shadow-4.5/man' cp ../config.xml config.xml xml2po --expand-all-entities -l de -p ../po/de.po -o chage.1.xml ../chage.1.xml sed -i 's:\(^:\1 lang="de">:' chage.1.xml if grep -q SHADOW-CONFIG-HERE chage.1.xml; then \ sed -e 's/^/%config;/' chage.1.xml > chage.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chage.1.xml > chage.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chage.1.xml-config Note: Writing man1/chage.1 xml2po --expand-all-entities -l de -p ../po/de.po -o chfn.1.xml ../chfn.1.xml sed -i 's:\(^:\1 lang="de">:' chfn.1.xml if grep -q SHADOW-CONFIG-HERE chfn.1.xml; then \ sed -e 's/^/%config;/' chfn.1.xml > chfn.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chfn.1.xml > chfn.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chfn.1.xml-config Note: Writing man1/chfn.1 xml2po --expand-all-entities -l de -p ../po/de.po -o chgpasswd.8.xml ../chgpasswd.8.xml sed -i 's:\(^:\1 lang="de">:' chgpasswd.8.xml if grep -q SHADOW-CONFIG-HERE chgpasswd.8.xml; then \ sed -e 's/^/%config;/' chgpasswd.8.xml > chgpasswd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chgpasswd.8.xml > chgpasswd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chgpasswd.8.xml-config Note: Writing man8/chgpasswd.8 xml2po --expand-all-entities -l de -p ../po/de.po -o chpasswd.8.xml ../chpasswd.8.xml sed -i 's:\(^:\1 lang="de">:' chpasswd.8.xml if grep -q SHADOW-CONFIG-HERE chpasswd.8.xml; then \ sed -e 's/^/%config;/' chpasswd.8.xml > chpasswd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chpasswd.8.xml > chpasswd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chpasswd.8.xml-config Note: Writing man8/chpasswd.8 xml2po --expand-all-entities -l de -p ../po/de.po -o chsh.1.xml ../chsh.1.xml sed -i 's:\(^:\1 lang="de">:' chsh.1.xml if grep -q SHADOW-CONFIG-HERE chsh.1.xml; then \ sed -e 's/^/%config;/' chsh.1.xml > chsh.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chsh.1.xml > chsh.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chsh.1.xml-config Note: Writing man1/chsh.1 xml2po --expand-all-entities -l de -p ../po/de.po -o expiry.1.xml ../expiry.1.xml sed -i 's:\(^:\1 lang="de">:' expiry.1.xml if grep -q SHADOW-CONFIG-HERE expiry.1.xml; then \ sed -e 's/^/%config;/' expiry.1.xml > expiry.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' expiry.1.xml > expiry.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl expiry.1.xml-config Note: Writing man1/expiry.1 xml2po --expand-all-entities -l de -p ../po/de.po -o faillog.5.xml ../faillog.5.xml sed -i 's:\(^:\1 lang="de">:' faillog.5.xml if grep -q SHADOW-CONFIG-HERE faillog.5.xml; then \ sed -e 's/^/%config;/' faillog.5.xml > faillog.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' faillog.5.xml > faillog.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl faillog.5.xml-config Note: Writing man5/faillog.5 xml2po --expand-all-entities -l de -p ../po/de.po -o faillog.8.xml ../faillog.8.xml sed -i 's:\(^:\1 lang="de">:' faillog.8.xml if grep -q SHADOW-CONFIG-HERE faillog.8.xml; then \ sed -e 's/^/%config;/' faillog.8.xml > faillog.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' faillog.8.xml > faillog.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl faillog.8.xml-config Note: Writing man8/faillog.8 xml2po --expand-all-entities -l de -p ../po/de.po -o shadow.3.xml ../shadow.3.xml sed -i 's:\(^:\1 lang="de">:' shadow.3.xml if grep -q SHADOW-CONFIG-HERE shadow.3.xml; then \ sed -e 's/^/%config;/' shadow.3.xml > shadow.3.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' shadow.3.xml > shadow.3.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl shadow.3.xml-config Note: Writing man3/shadow.3 Note: Writing man3/getspnam.3 (soelim stub) xml2po --expand-all-entities -l de -p ../po/de.po -o gpasswd.1.xml ../gpasswd.1.xml sed -i 's:\(^:\1 lang="de">:' gpasswd.1.xml if grep -q SHADOW-CONFIG-HERE gpasswd.1.xml; then \ sed -e 's/^/%config;/' gpasswd.1.xml > gpasswd.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' gpasswd.1.xml > gpasswd.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl gpasswd.1.xml-config Note: Writing man1/gpasswd.1 xml2po --expand-all-entities -l de -p ../po/de.po -o groupadd.8.xml ../groupadd.8.xml sed -i 's:\(^:\1 lang="de">:' groupadd.8.xml if grep -q SHADOW-CONFIG-HERE groupadd.8.xml; then \ sed -e 's/^/%config;/' groupadd.8.xml > groupadd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupadd.8.xml > groupadd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupadd.8.xml-config Note: Writing man8/groupadd.8 xml2po --expand-all-entities -l de -p ../po/de.po -o groupdel.8.xml ../groupdel.8.xml sed -i 's:\(^:\1 lang="de">:' groupdel.8.xml if grep -q SHADOW-CONFIG-HERE groupdel.8.xml; then \ sed -e 's/^/%config;/' groupdel.8.xml > groupdel.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupdel.8.xml > groupdel.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupdel.8.xml-config Note: Writing man8/groupdel.8 xml2po --expand-all-entities -l de -p ../po/de.po -o groupmems.8.xml ../groupmems.8.xml sed -i 's:\(^:\1 lang="de">:' groupmems.8.xml if grep -q SHADOW-CONFIG-HERE groupmems.8.xml; then \ sed -e 's/^/%config;/' groupmems.8.xml > groupmems.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupmems.8.xml > groupmems.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupmems.8.xml-config Note: Writing man8/groupmems.8 xml2po --expand-all-entities -l de -p ../po/de.po -o groupmod.8.xml ../groupmod.8.xml sed -i 's:\(^:\1 lang="de">:' groupmod.8.xml if grep -q SHADOW-CONFIG-HERE groupmod.8.xml; then \ sed -e 's/^/%config;/' groupmod.8.xml > groupmod.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupmod.8.xml > groupmod.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupmod.8.xml-config Note: Writing man8/groupmod.8 xml2po --expand-all-entities -l de -p ../po/de.po -o groups.1.xml ../groups.1.xml sed -i 's:\(^:\1 lang="de">:' groups.1.xml if grep -q SHADOW-CONFIG-HERE groups.1.xml; then \ sed -e 's/^/%config;/' groups.1.xml > groups.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groups.1.xml > groups.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groups.1.xml-config Note: Writing man1/groups.1 xml2po --expand-all-entities -l de -p ../po/de.po -o grpck.8.xml ../grpck.8.xml sed -i 's:\(^:\1 lang="de">:' grpck.8.xml if grep -q SHADOW-CONFIG-HERE grpck.8.xml; then \ sed -e 's/^/%config;/' grpck.8.xml > grpck.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' grpck.8.xml > grpck.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl grpck.8.xml-config Note: Writing man8/grpck.8 xml2po --expand-all-entities -l de -p ../po/de.po -o pwconv.8.xml ../pwconv.8.xml sed -i 's:\(^:\1 lang="de">:' pwconv.8.xml if grep -q SHADOW-CONFIG-HERE pwconv.8.xml; then \ sed -e 's/^/%config;/' pwconv.8.xml > pwconv.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' pwconv.8.xml > pwconv.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl pwconv.8.xml-config Note: Writing man8/pwconv.8 Note: Writing man8/pwunconv.8 (soelim stub) Note: Writing man8/grpconv.8 (soelim stub) Note: Writing man8/grpunconv.8 (soelim stub) xml2po --expand-all-entities -l de -p ../po/de.po -o gshadow.5.xml ../gshadow.5.xml sed -i 's:\(^:\1 lang="de">:' gshadow.5.xml if grep -q SHADOW-CONFIG-HERE gshadow.5.xml; then \ sed -e 's/^/%config;/' gshadow.5.xml > gshadow.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' gshadow.5.xml > gshadow.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl gshadow.5.xml-config Note: Writing man5/gshadow.5 xml2po --expand-all-entities -l de -p ../po/de.po -o lastlog.8.xml ../lastlog.8.xml sed -i 's:\(^:\1 lang="de">:' lastlog.8.xml if grep -q SHADOW-CONFIG-HERE lastlog.8.xml; then \ sed -e 's/^/%config;/' lastlog.8.xml > lastlog.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' lastlog.8.xml > lastlog.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl lastlog.8.xml-config Note: Writing man8/lastlog.8 xml2po --expand-all-entities -l de -p ../po/de.po -o login.1.xml ../login.1.xml sed -i 's:\(^:\1 lang="de">:' login.1.xml if grep -q SHADOW-CONFIG-HERE login.1.xml; then \ sed -e 's/^/%config;/' login.1.xml > login.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' login.1.xml > login.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl login.1.xml-config Note: Writing man1/login.1 xml2po --expand-all-entities -l de -p ../po/de.po -o login.defs.5.xml ../login.defs.5.xml sed -i 's:\(^:\1 lang="de">:' login.defs.5.xml if grep -q SHADOW-CONFIG-HERE login.defs.5.xml; then \ sed -e 's/^/%config;/' login.defs.5.xml > login.defs.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' login.defs.5.xml > login.defs.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl login.defs.5.xml-config Note: Writing man5/login.defs.5 xml2po --expand-all-entities -l de -p ../po/de.po -o logoutd.8.xml ../logoutd.8.xml sed -i 's:\(^:\1 lang="de">:' logoutd.8.xml if grep -q SHADOW-CONFIG-HERE logoutd.8.xml; then \ sed -e 's/^/%config;/' logoutd.8.xml > logoutd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' logoutd.8.xml > logoutd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl logoutd.8.xml-config Note: Writing man8/logoutd.8 xml2po --expand-all-entities -l de -p ../po/de.po -o newgrp.1.xml ../newgrp.1.xml sed -i 's:\(^:\1 lang="de">:' newgrp.1.xml if grep -q SHADOW-CONFIG-HERE newgrp.1.xml; then \ sed -e 's/^/%config;/' newgrp.1.xml > newgrp.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' newgrp.1.xml > newgrp.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl newgrp.1.xml-config Note: Writing man1/newgrp.1 xml2po --expand-all-entities -l de -p ../po/de.po -o newusers.8.xml ../newusers.8.xml sed -i 's:\(^:\1 lang="de">:' newusers.8.xml if grep -q SHADOW-CONFIG-HERE newusers.8.xml; then \ sed -e 's/^/%config;/' newusers.8.xml > newusers.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' newusers.8.xml > newusers.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl newusers.8.xml-config Note: Writing man8/newusers.8 xml2po --expand-all-entities -l de -p ../po/de.po -o nologin.8.xml ../nologin.8.xml sed -i 's:\(^:\1 lang="de">:' nologin.8.xml if grep -q SHADOW-CONFIG-HERE nologin.8.xml; then \ sed -e 's/^/%config;/' nologin.8.xml > nologin.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' nologin.8.xml > nologin.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl nologin.8.xml-config Note: Writing man8/nologin.8 xml2po --expand-all-entities -l de -p ../po/de.po -o passwd.1.xml ../passwd.1.xml sed -i 's:\(^:\1 lang="de">:' passwd.1.xml if grep -q SHADOW-CONFIG-HERE passwd.1.xml; then \ sed -e 's/^/%config;/' passwd.1.xml > passwd.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' passwd.1.xml > passwd.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl passwd.1.xml-config Note: Writing man1/passwd.1 xml2po --expand-all-entities -l de -p ../po/de.po -o passwd.5.xml ../passwd.5.xml sed -i 's:\(^:\1 lang="de">:' passwd.5.xml if grep -q SHADOW-CONFIG-HERE passwd.5.xml; then \ sed -e 's/^/%config;/' passwd.5.xml > passwd.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' passwd.5.xml > passwd.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl passwd.5.xml-config Note: Writing man5/passwd.5 xml2po --expand-all-entities -l de -p ../po/de.po -o pwck.8.xml ../pwck.8.xml sed -i 's:\(^:\1 lang="de">:' pwck.8.xml if grep -q SHADOW-CONFIG-HERE pwck.8.xml; then \ sed -e 's/^/%config;/' pwck.8.xml > pwck.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' pwck.8.xml > pwck.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl pwck.8.xml-config Note: Writing man8/pwck.8 xml2po --expand-all-entities -l de -p ../po/de.po -o sg.1.xml ../sg.1.xml sed -i 's:\(^:\1 lang="de">:' sg.1.xml if grep -q SHADOW-CONFIG-HERE sg.1.xml; then \ sed -e 's/^/%config;/' sg.1.xml > sg.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' sg.1.xml > sg.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl sg.1.xml-config Note: Writing man1/sg.1 xml2po --expand-all-entities -l de -p ../po/de.po -o shadow.5.xml ../shadow.5.xml sed -i 's:\(^:\1 lang="de">:' shadow.5.xml if grep -q SHADOW-CONFIG-HERE shadow.5.xml; then \ sed -e 's/^/%config;/' shadow.5.xml > shadow.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' shadow.5.xml > shadow.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl shadow.5.xml-config Note: Writing man5/shadow.5 xml2po --expand-all-entities -l de -p ../po/de.po -o su.1.xml ../su.1.xml sed -i 's:\(^:\1 lang="de">:' su.1.xml if grep -q SHADOW-CONFIG-HERE su.1.xml; then \ sed -e 's/^/%config;/' su.1.xml > su.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' su.1.xml > su.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl su.1.xml-config Note: Writing man1/su.1 xml2po --expand-all-entities -l de -p ../po/de.po -o suauth.5.xml ../suauth.5.xml sed -i 's:\(^:\1 lang="de">:' suauth.5.xml if grep -q SHADOW-CONFIG-HERE suauth.5.xml; then \ sed -e 's/^/%config;/' suauth.5.xml > suauth.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' suauth.5.xml > suauth.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl suauth.5.xml-config Note: Writing man5/suauth.5 xml2po --expand-all-entities -l de -p ../po/de.po -o useradd.8.xml ../useradd.8.xml sed -i 's:\(^:\1 lang="de">:' useradd.8.xml if grep -q SHADOW-CONFIG-HERE useradd.8.xml; then \ sed -e 's/^/%config;/' useradd.8.xml > useradd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' useradd.8.xml > useradd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl useradd.8.xml-config Note: Writing man8/useradd.8 xml2po --expand-all-entities -l de -p ../po/de.po -o userdel.8.xml ../userdel.8.xml sed -i 's:\(^:\1 lang="de">:' userdel.8.xml if grep -q SHADOW-CONFIG-HERE userdel.8.xml; then \ sed -e 's/^/%config;/' userdel.8.xml > userdel.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' userdel.8.xml > userdel.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl userdel.8.xml-config Note: Writing man8/userdel.8 xml2po --expand-all-entities -l de -p ../po/de.po -o usermod.8.xml ../usermod.8.xml sed -i 's:\(^:\1 lang="de">:' usermod.8.xml if grep -q SHADOW-CONFIG-HERE usermod.8.xml; then \ sed -e 's/^/%config;/' usermod.8.xml > usermod.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' usermod.8.xml > usermod.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl usermod.8.xml-config Note: Writing man8/usermod.8 xml2po --expand-all-entities -l de -p ../po/de.po -o vipw.8.xml ../vipw.8.xml sed -i 's:\(^:\1 lang="de">:' vipw.8.xml if grep -q SHADOW-CONFIG-HERE vipw.8.xml; then \ sed -e 's/^/%config;/' vipw.8.xml > vipw.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' vipw.8.xml > vipw.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl vipw.8.xml-config Note: Writing man8/vipw.8 Note: Writing man8/vigr.8 (soelim stub) rm chsh.1.xml pwck.8.xml faillog.8.xml chgpasswd.8.xml chpasswd.8.xml login.1.xml grpck.8.xml-config usermod.8.xml-config logoutd.8.xml lastlog.8.xml-config vipw.8.xml groupdel.8.xml-config passwd.1.xml-config gpasswd.1.xml-config newusers.8.xml-config groupmod.8.xml-config gshadow.5.xml sg.1.xml-config pwconv.8.xml-config lastlog.8.xml chfn.1.xml-config passwd.5.xml userdel.8.xml-config shadow.3.xml chage.1.xml-config groupmems.8.xml chsh.1.xml-config login.defs.5.xml pwck.8.xml-config shadow.5.xml groupadd.8.xml chgpasswd.8.xml-config chpasswd.8.xml-config login.1.xml-config su.1.xml-config logoutd.8.xml-config expiry.1.xml-config login.defs.5.xml-config expiry.1.xml nologin.8.xml userdel.8.xml useradd.8.xml-config grpck.8.xml passwd.5.xml-config gshadow.5.xml-config groupdel.8.xml groups.1.xml newgrp.1.xml newusers.8.xml su.1.xml faillog.5.xml sg.1.xml shadow.3.xml-config groupmems.8.xml-config nologin.8.xml-config vipw.8.xml-config suauth.5.xml shadow.5.xml-config groupadd.8.xml-config usermod.8.xml passwd.1.xml groupmod.8.xml groups.1.xml-config gpasswd.1.xml pwconv.8.xml useradd.8.xml newgrp.1.xml-config faillog.8.xml-config chfn.1.xml suauth.5.xml-config faillog.5.xml-config chage.1.xml make[4]: Leaving directory '/build/shadow-4.5/man/de' Making all in es make[4]: Entering directory '/build/shadow-4.5/man/es' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/shadow-4.5/man/es' Making all in fi make[4]: Entering directory '/build/shadow-4.5/man/fi' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/shadow-4.5/man/fi' Making all in fr make[4]: Entering directory '/build/shadow-4.5/man/fr' /usr/bin/make -C .. config.xml make[5]: Entering directory '/build/shadow-4.5/man' make[5]: 'config.xml' is up to date. make[5]: Leaving directory '/build/shadow-4.5/man' cp ../config.xml config.xml xml2po --expand-all-entities -l fr -p ../po/fr.po -o chage.1.xml ../chage.1.xml sed -i 's:\(^:\1 lang="fr">:' chage.1.xml if grep -q SHADOW-CONFIG-HERE chage.1.xml; then \ sed -e 's/^/%config;/' chage.1.xml > chage.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chage.1.xml > chage.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chage.1.xml-config Note: Writing man1/chage.1 xml2po --expand-all-entities -l fr -p ../po/fr.po -o chfn.1.xml ../chfn.1.xml sed -i 's:\(^:\1 lang="fr">:' chfn.1.xml if grep -q SHADOW-CONFIG-HERE chfn.1.xml; then \ sed -e 's/^/%config;/' chfn.1.xml > chfn.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chfn.1.xml > chfn.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chfn.1.xml-config Note: Writing man1/chfn.1 xml2po --expand-all-entities -l fr -p ../po/fr.po -o chgpasswd.8.xml ../chgpasswd.8.xml sed -i 's:\(^:\1 lang="fr">:' chgpasswd.8.xml if grep -q SHADOW-CONFIG-HERE chgpasswd.8.xml; then \ sed -e 's/^/%config;/' chgpasswd.8.xml > chgpasswd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chgpasswd.8.xml > chgpasswd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chgpasswd.8.xml-config Note: Writing man8/chgpasswd.8 xml2po --expand-all-entities -l fr -p ../po/fr.po -o chpasswd.8.xml ../chpasswd.8.xml sed -i 's:\(^:\1 lang="fr">:' chpasswd.8.xml if grep -q SHADOW-CONFIG-HERE chpasswd.8.xml; then \ sed -e 's/^/%config;/' chpasswd.8.xml > chpasswd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chpasswd.8.xml > chpasswd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chpasswd.8.xml-config Note: Writing man8/chpasswd.8 xml2po --expand-all-entities -l fr -p ../po/fr.po -o chsh.1.xml ../chsh.1.xml sed -i 's:\(^:\1 lang="fr">:' chsh.1.xml if grep -q SHADOW-CONFIG-HERE chsh.1.xml; then \ sed -e 's/^/%config;/' chsh.1.xml > chsh.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chsh.1.xml > chsh.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chsh.1.xml-config Note: Writing man1/chsh.1 xml2po --expand-all-entities -l fr -p ../po/fr.po -o expiry.1.xml ../expiry.1.xml sed -i 's:\(^:\1 lang="fr">:' expiry.1.xml if grep -q SHADOW-CONFIG-HERE expiry.1.xml; then \ sed -e 's/^/%config;/' expiry.1.xml > expiry.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' expiry.1.xml > expiry.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl expiry.1.xml-config Note: Writing man1/expiry.1 xml2po --expand-all-entities -l fr -p ../po/fr.po -o faillog.5.xml ../faillog.5.xml sed -i 's:\(^:\1 lang="fr">:' faillog.5.xml if grep -q SHADOW-CONFIG-HERE faillog.5.xml; then \ sed -e 's/^/%config;/' faillog.5.xml > faillog.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' faillog.5.xml > faillog.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl faillog.5.xml-config Note: Writing man5/faillog.5 xml2po --expand-all-entities -l fr -p ../po/fr.po -o faillog.8.xml ../faillog.8.xml sed -i 's:\(^:\1 lang="fr">:' faillog.8.xml if grep -q SHADOW-CONFIG-HERE faillog.8.xml; then \ sed -e 's/^/%config;/' faillog.8.xml > faillog.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' faillog.8.xml > faillog.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl faillog.8.xml-config Note: Writing man8/faillog.8 xml2po --expand-all-entities -l fr -p ../po/fr.po -o shadow.3.xml ../shadow.3.xml sed -i 's:\(^:\1 lang="fr">:' shadow.3.xml if grep -q SHADOW-CONFIG-HERE shadow.3.xml; then \ sed -e 's/^/%config;/' shadow.3.xml > shadow.3.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' shadow.3.xml > shadow.3.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl shadow.3.xml-config Note: Writing man3/shadow.3 Note: Writing man3/getspnam.3 (soelim stub) xml2po --expand-all-entities -l fr -p ../po/fr.po -o gpasswd.1.xml ../gpasswd.1.xml sed -i 's:\(^:\1 lang="fr">:' gpasswd.1.xml if grep -q SHADOW-CONFIG-HERE gpasswd.1.xml; then \ sed -e 's/^/%config;/' gpasswd.1.xml > gpasswd.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' gpasswd.1.xml > gpasswd.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl gpasswd.1.xml-config Note: Writing man1/gpasswd.1 xml2po --expand-all-entities -l fr -p ../po/fr.po -o groupadd.8.xml ../groupadd.8.xml sed -i 's:\(^:\1 lang="fr">:' groupadd.8.xml if grep -q SHADOW-CONFIG-HERE groupadd.8.xml; then \ sed -e 's/^/%config;/' groupadd.8.xml > groupadd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupadd.8.xml > groupadd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupadd.8.xml-config Note: Writing man8/groupadd.8 xml2po --expand-all-entities -l fr -p ../po/fr.po -o groupdel.8.xml ../groupdel.8.xml sed -i 's:\(^:\1 lang="fr">:' groupdel.8.xml if grep -q SHADOW-CONFIG-HERE groupdel.8.xml; then \ sed -e 's/^/%config;/' groupdel.8.xml > groupdel.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupdel.8.xml > groupdel.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupdel.8.xml-config Note: Writing man8/groupdel.8 xml2po --expand-all-entities -l fr -p ../po/fr.po -o groupmems.8.xml ../groupmems.8.xml sed -i 's:\(^:\1 lang="fr">:' groupmems.8.xml if grep -q SHADOW-CONFIG-HERE groupmems.8.xml; then \ sed -e 's/^/%config;/' groupmems.8.xml > groupmems.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupmems.8.xml > groupmems.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupmems.8.xml-config Note: Writing man8/groupmems.8 xml2po --expand-all-entities -l fr -p ../po/fr.po -o groupmod.8.xml ../groupmod.8.xml sed -i 's:\(^:\1 lang="fr">:' groupmod.8.xml if grep -q SHADOW-CONFIG-HERE groupmod.8.xml; then \ sed -e 's/^/%config;/' groupmod.8.xml > groupmod.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupmod.8.xml > groupmod.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupmod.8.xml-config Note: Writing man8/groupmod.8 xml2po --expand-all-entities -l fr -p ../po/fr.po -o groups.1.xml ../groups.1.xml sed -i 's:\(^:\1 lang="fr">:' groups.1.xml if grep -q SHADOW-CONFIG-HERE groups.1.xml; then \ sed -e 's/^/%config;/' groups.1.xml > groups.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groups.1.xml > groups.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groups.1.xml-config Note: Writing man1/groups.1 xml2po --expand-all-entities -l fr -p ../po/fr.po -o grpck.8.xml ../grpck.8.xml sed -i 's:\(^:\1 lang="fr">:' grpck.8.xml if grep -q SHADOW-CONFIG-HERE grpck.8.xml; then \ sed -e 's/^/%config;/' grpck.8.xml > grpck.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' grpck.8.xml > grpck.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl grpck.8.xml-config Note: Writing man8/grpck.8 xml2po --expand-all-entities -l fr -p ../po/fr.po -o pwconv.8.xml ../pwconv.8.xml sed -i 's:\(^:\1 lang="fr">:' pwconv.8.xml if grep -q SHADOW-CONFIG-HERE pwconv.8.xml; then \ sed -e 's/^/%config;/' pwconv.8.xml > pwconv.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' pwconv.8.xml > pwconv.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl pwconv.8.xml-config Note: Writing man8/pwconv.8 Note: Writing man8/pwunconv.8 (soelim stub) Note: Writing man8/grpconv.8 (soelim stub) Note: Writing man8/grpunconv.8 (soelim stub) xml2po --expand-all-entities -l fr -p ../po/fr.po -o gshadow.5.xml ../gshadow.5.xml sed -i 's:\(^:\1 lang="fr">:' gshadow.5.xml if grep -q SHADOW-CONFIG-HERE gshadow.5.xml; then \ sed -e 's/^/%config;/' gshadow.5.xml > gshadow.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' gshadow.5.xml > gshadow.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl gshadow.5.xml-config Note: Writing man5/gshadow.5 xml2po --expand-all-entities -l fr -p ../po/fr.po -o lastlog.8.xml ../lastlog.8.xml sed -i 's:\(^:\1 lang="fr">:' lastlog.8.xml if grep -q SHADOW-CONFIG-HERE lastlog.8.xml; then \ sed -e 's/^/%config;/' lastlog.8.xml > lastlog.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' lastlog.8.xml > lastlog.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl lastlog.8.xml-config Note: Writing man8/lastlog.8 xml2po --expand-all-entities -l fr -p ../po/fr.po -o login.1.xml ../login.1.xml sed -i 's:\(^:\1 lang="fr">:' login.1.xml if grep -q SHADOW-CONFIG-HERE login.1.xml; then \ sed -e 's/^/%config;/' login.1.xml > login.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' login.1.xml > login.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl login.1.xml-config Note: Writing man1/login.1 xml2po --expand-all-entities -l fr -p ../po/fr.po -o login.defs.5.xml ../login.defs.5.xml sed -i 's:\(^:\1 lang="fr">:' login.defs.5.xml if grep -q SHADOW-CONFIG-HERE login.defs.5.xml; then \ sed -e 's/^/%config;/' login.defs.5.xml > login.defs.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' login.defs.5.xml > login.defs.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl login.defs.5.xml-config Note: Writing man5/login.defs.5 xml2po --expand-all-entities -l fr -p ../po/fr.po -o logoutd.8.xml ../logoutd.8.xml sed -i 's:\(^:\1 lang="fr">:' logoutd.8.xml if grep -q SHADOW-CONFIG-HERE logoutd.8.xml; then \ sed -e 's/^/%config;/' logoutd.8.xml > logoutd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' logoutd.8.xml > logoutd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl logoutd.8.xml-config Note: Writing man8/logoutd.8 xml2po --expand-all-entities -l fr -p ../po/fr.po -o newgrp.1.xml ../newgrp.1.xml sed -i 's:\(^:\1 lang="fr">:' newgrp.1.xml if grep -q SHADOW-CONFIG-HERE newgrp.1.xml; then \ sed -e 's/^/%config;/' newgrp.1.xml > newgrp.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' newgrp.1.xml > newgrp.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl newgrp.1.xml-config Note: Writing man1/newgrp.1 xml2po --expand-all-entities -l fr -p ../po/fr.po -o newusers.8.xml ../newusers.8.xml sed -i 's:\(^:\1 lang="fr">:' newusers.8.xml if grep -q SHADOW-CONFIG-HERE newusers.8.xml; then \ sed -e 's/^/%config;/' newusers.8.xml > newusers.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' newusers.8.xml > newusers.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl newusers.8.xml-config Note: Writing man8/newusers.8 xml2po --expand-all-entities -l fr -p ../po/fr.po -o nologin.8.xml ../nologin.8.xml sed -i 's:\(^:\1 lang="fr">:' nologin.8.xml if grep -q SHADOW-CONFIG-HERE nologin.8.xml; then \ sed -e 's/^/%config;/' nologin.8.xml > nologin.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' nologin.8.xml > nologin.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl nologin.8.xml-config Note: Writing man8/nologin.8 xml2po --expand-all-entities -l fr -p ../po/fr.po -o passwd.1.xml ../passwd.1.xml sed -i 's:\(^:\1 lang="fr">:' passwd.1.xml if grep -q SHADOW-CONFIG-HERE passwd.1.xml; then \ sed -e 's/^/%config;/' passwd.1.xml > passwd.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' passwd.1.xml > passwd.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl passwd.1.xml-config Note: Writing man1/passwd.1 xml2po --expand-all-entities -l fr -p ../po/fr.po -o passwd.5.xml ../passwd.5.xml sed -i 's:\(^:\1 lang="fr">:' passwd.5.xml if grep -q SHADOW-CONFIG-HERE passwd.5.xml; then \ sed -e 's/^/%config;/' passwd.5.xml > passwd.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' passwd.5.xml > passwd.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl passwd.5.xml-config Note: Writing man5/passwd.5 xml2po --expand-all-entities -l fr -p ../po/fr.po -o pwck.8.xml ../pwck.8.xml sed -i 's:\(^:\1 lang="fr">:' pwck.8.xml if grep -q SHADOW-CONFIG-HERE pwck.8.xml; then \ sed -e 's/^/%config;/' pwck.8.xml > pwck.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' pwck.8.xml > pwck.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl pwck.8.xml-config Note: Writing man8/pwck.8 xml2po --expand-all-entities -l fr -p ../po/fr.po -o sg.1.xml ../sg.1.xml sed -i 's:\(^:\1 lang="fr">:' sg.1.xml if grep -q SHADOW-CONFIG-HERE sg.1.xml; then \ sed -e 's/^/%config;/' sg.1.xml > sg.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' sg.1.xml > sg.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl sg.1.xml-config Note: Writing man1/sg.1 xml2po --expand-all-entities -l fr -p ../po/fr.po -o shadow.5.xml ../shadow.5.xml sed -i 's:\(^:\1 lang="fr">:' shadow.5.xml if grep -q SHADOW-CONFIG-HERE shadow.5.xml; then \ sed -e 's/^/%config;/' shadow.5.xml > shadow.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' shadow.5.xml > shadow.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl shadow.5.xml-config Note: Writing man5/shadow.5 xml2po --expand-all-entities -l fr -p ../po/fr.po -o su.1.xml ../su.1.xml sed -i 's:\(^:\1 lang="fr">:' su.1.xml if grep -q SHADOW-CONFIG-HERE su.1.xml; then \ sed -e 's/^/%config;/' su.1.xml > su.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' su.1.xml > su.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl su.1.xml-config Note: Writing man1/su.1 xml2po --expand-all-entities -l fr -p ../po/fr.po -o suauth.5.xml ../suauth.5.xml sed -i 's:\(^:\1 lang="fr">:' suauth.5.xml if grep -q SHADOW-CONFIG-HERE suauth.5.xml; then \ sed -e 's/^/%config;/' suauth.5.xml > suauth.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' suauth.5.xml > suauth.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl suauth.5.xml-config Note: Writing man5/suauth.5 xml2po --expand-all-entities -l fr -p ../po/fr.po -o useradd.8.xml ../useradd.8.xml sed -i 's:\(^:\1 lang="fr">:' useradd.8.xml if grep -q SHADOW-CONFIG-HERE useradd.8.xml; then \ sed -e 's/^/%config;/' useradd.8.xml > useradd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' useradd.8.xml > useradd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl useradd.8.xml-config Note: Writing man8/useradd.8 xml2po --expand-all-entities -l fr -p ../po/fr.po -o userdel.8.xml ../userdel.8.xml sed -i 's:\(^:\1 lang="fr">:' userdel.8.xml if grep -q SHADOW-CONFIG-HERE userdel.8.xml; then \ sed -e 's/^/%config;/' userdel.8.xml > userdel.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' userdel.8.xml > userdel.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl userdel.8.xml-config Note: Writing man8/userdel.8 xml2po --expand-all-entities -l fr -p ../po/fr.po -o usermod.8.xml ../usermod.8.xml sed -i 's:\(^:\1 lang="fr">:' usermod.8.xml if grep -q SHADOW-CONFIG-HERE usermod.8.xml; then \ sed -e 's/^/%config;/' usermod.8.xml > usermod.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' usermod.8.xml > usermod.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl usermod.8.xml-config Note: Writing man8/usermod.8 xml2po --expand-all-entities -l fr -p ../po/fr.po -o vipw.8.xml ../vipw.8.xml sed -i 's:\(^:\1 lang="fr">:' vipw.8.xml if grep -q SHADOW-CONFIG-HERE vipw.8.xml; then \ sed -e 's/^/%config;/' vipw.8.xml > vipw.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' vipw.8.xml > vipw.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl vipw.8.xml-config Note: Writing man8/vipw.8 Note: Writing man8/vigr.8 (soelim stub) xml2po --expand-all-entities -l fr -p ../po/fr.po -o newgidmap.1.xml ../newgidmap.1.xml sed -i 's:\(^:\1 lang="fr">:' newgidmap.1.xml if grep -q SHADOW-CONFIG-HERE newgidmap.1.xml; then \ sed -e 's/^/%config;/' newgidmap.1.xml > newgidmap.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' newgidmap.1.xml > newgidmap.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl newgidmap.1.xml-config Warn: meta author : no refentry/info/author newgidmap Note: meta author : see http://docbook.sf.net/el/author newgidmap Warn: meta author : no author data, so inserted a fixme newgidmap Note: Writing man1/newgidmap.1 xml2po --expand-all-entities -l fr -p ../po/fr.po -o newuidmap.1.xml ../newuidmap.1.xml sed -i 's:\(^:\1 lang="fr">:' newuidmap.1.xml if grep -q SHADOW-CONFIG-HERE newuidmap.1.xml; then \ sed -e 's/^/%config;/' newuidmap.1.xml > newuidmap.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' newuidmap.1.xml > newuidmap.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl newuidmap.1.xml-config Warn: meta author : no refentry/info/author newuidmap Note: meta author : see http://docbook.sf.net/el/author newuidmap Warn: meta author : no author data, so inserted a fixme newuidmap Note: Writing man1/newuidmap.1 xml2po --expand-all-entities -l fr -p ../po/fr.po -o subgid.5.xml ../subgid.5.xml sed -i 's:\(^:\1 lang="fr">:' subgid.5.xml if grep -q SHADOW-CONFIG-HERE subgid.5.xml; then \ sed -e 's/^/%config;/' subgid.5.xml > subgid.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' subgid.5.xml > subgid.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl subgid.5.xml-config Warn: meta author : no refentry/info/author subgid Note: meta author : see http://docbook.sf.net/el/author subgid Warn: meta author : no author data, so inserted a fixme subgid Note: Writing man5/subgid.5 xml2po --expand-all-entities -l fr -p ../po/fr.po -o subuid.5.xml ../subuid.5.xml sed -i 's:\(^:\1 lang="fr">:' subuid.5.xml if grep -q SHADOW-CONFIG-HERE subuid.5.xml; then \ sed -e 's/^/%config;/' subuid.5.xml > subuid.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' subuid.5.xml > subuid.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl subuid.5.xml-config Warn: meta author : no refentry/info/author subuid Note: meta author : see http://docbook.sf.net/el/author subuid Warn: meta author : no author data, so inserted a fixme subuid Note: Writing man5/subuid.5 rm chsh.1.xml pwck.8.xml faillog.8.xml newgidmap.1.xml chgpasswd.8.xml chpasswd.8.xml login.1.xml grpck.8.xml-config usermod.8.xml-config logoutd.8.xml lastlog.8.xml-config vipw.8.xml groupdel.8.xml-config passwd.1.xml-config gpasswd.1.xml-config newusers.8.xml-config groupmod.8.xml-config gshadow.5.xml sg.1.xml-config pwconv.8.xml-config lastlog.8.xml chfn.1.xml-config subuid.5.xml userdel.8.xml-config shadow.3.xml chage.1.xml-config newuidmap.1.xml-config groupmems.8.xml chsh.1.xml-config login.defs.5.xml pwck.8.xml-config shadow.5.xml groupadd.8.xml chgpasswd.8.xml-config chpasswd.8.xml-config login.1.xml-config su.1.xml-config newgidmap.1.xml-config logoutd.8.xml-config expiry.1.xml-config newuidmap.1.xml login.defs.5.xml-config expiry.1.xml nologin.8.xml subgid.5.xml userdel.8.xml useradd.8.xml-config grpck.8.xml passwd.5.xml-config gshadow.5.xml-config groupdel.8.xml groups.1.xml newgrp.1.xml newusers.8.xml su.1.xml faillog.5.xml sg.1.xml subuid.5.xml-config shadow.3.xml-config groupmems.8.xml-config nologin.8.xml-config vipw.8.xml-config passwd.5.xml suauth.5.xml shadow.5.xml-config groupadd.8.xml-config usermod.8.xml passwd.1.xml subgid.5.xml-config groupmod.8.xml groups.1.xml-config gpasswd.1.xml pwconv.8.xml useradd.8.xml newgrp.1.xml-config faillog.8.xml-config chfn.1.xml suauth.5.xml-config faillog.5.xml-config chage.1.xml make[4]: Leaving directory '/build/shadow-4.5/man/fr' Making all in hu make[4]: Entering directory '/build/shadow-4.5/man/hu' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/shadow-4.5/man/hu' Making all in id make[4]: Entering directory '/build/shadow-4.5/man/id' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/shadow-4.5/man/id' Making all in it make[4]: Entering directory '/build/shadow-4.5/man/it' /usr/bin/make -C .. config.xml make[5]: Entering directory '/build/shadow-4.5/man' make[5]: 'config.xml' is up to date. make[5]: Leaving directory '/build/shadow-4.5/man' cp ../config.xml config.xml xml2po --expand-all-entities -l it -p ../po/it.po -o chage.1.xml ../chage.1.xml sed -i 's:\(^:\1 lang="it">:' chage.1.xml if grep -q SHADOW-CONFIG-HERE chage.1.xml; then \ sed -e 's/^/%config;/' chage.1.xml > chage.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chage.1.xml > chage.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chage.1.xml-config Note: Writing man1/chage.1 xml2po --expand-all-entities -l it -p ../po/it.po -o chfn.1.xml ../chfn.1.xml sed -i 's:\(^:\1 lang="it">:' chfn.1.xml if grep -q SHADOW-CONFIG-HERE chfn.1.xml; then \ sed -e 's/^/%config;/' chfn.1.xml > chfn.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chfn.1.xml > chfn.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chfn.1.xml-config Note: Writing man1/chfn.1 xml2po --expand-all-entities -l it -p ../po/it.po -o chgpasswd.8.xml ../chgpasswd.8.xml sed -i 's:\(^:\1 lang="it">:' chgpasswd.8.xml if grep -q SHADOW-CONFIG-HERE chgpasswd.8.xml; then \ sed -e 's/^/%config;/' chgpasswd.8.xml > chgpasswd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chgpasswd.8.xml > chgpasswd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chgpasswd.8.xml-config Note: Writing man8/chgpasswd.8 xml2po --expand-all-entities -l it -p ../po/it.po -o chpasswd.8.xml ../chpasswd.8.xml sed -i 's:\(^:\1 lang="it">:' chpasswd.8.xml if grep -q SHADOW-CONFIG-HERE chpasswd.8.xml; then \ sed -e 's/^/%config;/' chpasswd.8.xml > chpasswd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chpasswd.8.xml > chpasswd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chpasswd.8.xml-config Note: Writing man8/chpasswd.8 xml2po --expand-all-entities -l it -p ../po/it.po -o chsh.1.xml ../chsh.1.xml sed -i 's:\(^:\1 lang="it">:' chsh.1.xml if grep -q SHADOW-CONFIG-HERE chsh.1.xml; then \ sed -e 's/^/%config;/' chsh.1.xml > chsh.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chsh.1.xml > chsh.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chsh.1.xml-config Note: Writing man1/chsh.1 xml2po --expand-all-entities -l it -p ../po/it.po -o expiry.1.xml ../expiry.1.xml sed -i 's:\(^:\1 lang="it">:' expiry.1.xml if grep -q SHADOW-CONFIG-HERE expiry.1.xml; then \ sed -e 's/^/%config;/' expiry.1.xml > expiry.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' expiry.1.xml > expiry.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl expiry.1.xml-config Note: Writing man1/expiry.1 xml2po --expand-all-entities -l it -p ../po/it.po -o faillog.5.xml ../faillog.5.xml sed -i 's:\(^:\1 lang="it">:' faillog.5.xml if grep -q SHADOW-CONFIG-HERE faillog.5.xml; then \ sed -e 's/^/%config;/' faillog.5.xml > faillog.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' faillog.5.xml > faillog.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl faillog.5.xml-config Note: Writing man5/faillog.5 xml2po --expand-all-entities -l it -p ../po/it.po -o faillog.8.xml ../faillog.8.xml sed -i 's:\(^:\1 lang="it">:' faillog.8.xml if grep -q SHADOW-CONFIG-HERE faillog.8.xml; then \ sed -e 's/^/%config;/' faillog.8.xml > faillog.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' faillog.8.xml > faillog.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl faillog.8.xml-config Note: Writing man8/faillog.8 xml2po --expand-all-entities -l it -p ../po/it.po -o shadow.3.xml ../shadow.3.xml sed -i 's:\(^:\1 lang="it">:' shadow.3.xml if grep -q SHADOW-CONFIG-HERE shadow.3.xml; then \ sed -e 's/^/%config;/' shadow.3.xml > shadow.3.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' shadow.3.xml > shadow.3.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl shadow.3.xml-config Note: Writing man3/shadow.3 Note: Writing man3/getspnam.3 (soelim stub) xml2po --expand-all-entities -l it -p ../po/it.po -o gpasswd.1.xml ../gpasswd.1.xml sed -i 's:\(^:\1 lang="it">:' gpasswd.1.xml if grep -q SHADOW-CONFIG-HERE gpasswd.1.xml; then \ sed -e 's/^/%config;/' gpasswd.1.xml > gpasswd.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' gpasswd.1.xml > gpasswd.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl gpasswd.1.xml-config Note: Writing man1/gpasswd.1 xml2po --expand-all-entities -l it -p ../po/it.po -o groupadd.8.xml ../groupadd.8.xml sed -i 's:\(^:\1 lang="it">:' groupadd.8.xml if grep -q SHADOW-CONFIG-HERE groupadd.8.xml; then \ sed -e 's/^/%config;/' groupadd.8.xml > groupadd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupadd.8.xml > groupadd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupadd.8.xml-config Note: Writing man8/groupadd.8 xml2po --expand-all-entities -l it -p ../po/it.po -o groupdel.8.xml ../groupdel.8.xml sed -i 's:\(^:\1 lang="it">:' groupdel.8.xml if grep -q SHADOW-CONFIG-HERE groupdel.8.xml; then \ sed -e 's/^/%config;/' groupdel.8.xml > groupdel.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupdel.8.xml > groupdel.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupdel.8.xml-config Note: Writing man8/groupdel.8 xml2po --expand-all-entities -l it -p ../po/it.po -o groupmems.8.xml ../groupmems.8.xml sed -i 's:\(^:\1 lang="it">:' groupmems.8.xml if grep -q SHADOW-CONFIG-HERE groupmems.8.xml; then \ sed -e 's/^/%config;/' groupmems.8.xml > groupmems.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupmems.8.xml > groupmems.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupmems.8.xml-config Note: Writing man8/groupmems.8 xml2po --expand-all-entities -l it -p ../po/it.po -o groupmod.8.xml ../groupmod.8.xml sed -i 's:\(^:\1 lang="it">:' groupmod.8.xml if grep -q SHADOW-CONFIG-HERE groupmod.8.xml; then \ sed -e 's/^/%config;/' groupmod.8.xml > groupmod.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupmod.8.xml > groupmod.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupmod.8.xml-config Note: Writing man8/groupmod.8 xml2po --expand-all-entities -l it -p ../po/it.po -o groups.1.xml ../groups.1.xml sed -i 's:\(^:\1 lang="it">:' groups.1.xml if grep -q SHADOW-CONFIG-HERE groups.1.xml; then \ sed -e 's/^/%config;/' groups.1.xml > groups.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groups.1.xml > groups.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groups.1.xml-config Note: Writing man1/groups.1 xml2po --expand-all-entities -l it -p ../po/it.po -o grpck.8.xml ../grpck.8.xml sed -i 's:\(^:\1 lang="it">:' grpck.8.xml if grep -q SHADOW-CONFIG-HERE grpck.8.xml; then \ sed -e 's/^/%config;/' grpck.8.xml > grpck.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' grpck.8.xml > grpck.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl grpck.8.xml-config Note: Writing man8/grpck.8 xml2po --expand-all-entities -l it -p ../po/it.po -o pwconv.8.xml ../pwconv.8.xml sed -i 's:\(^:\1 lang="it">:' pwconv.8.xml if grep -q SHADOW-CONFIG-HERE pwconv.8.xml; then \ sed -e 's/^/%config;/' pwconv.8.xml > pwconv.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' pwconv.8.xml > pwconv.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl pwconv.8.xml-config Note: Writing man8/pwconv.8 Note: Writing man8/pwunconv.8 (soelim stub) Note: Writing man8/grpconv.8 (soelim stub) Note: Writing man8/grpunconv.8 (soelim stub) xml2po --expand-all-entities -l it -p ../po/it.po -o gshadow.5.xml ../gshadow.5.xml sed -i 's:\(^:\1 lang="it">:' gshadow.5.xml if grep -q SHADOW-CONFIG-HERE gshadow.5.xml; then \ sed -e 's/^/%config;/' gshadow.5.xml > gshadow.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' gshadow.5.xml > gshadow.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl gshadow.5.xml-config Note: Writing man5/gshadow.5 xml2po --expand-all-entities -l it -p ../po/it.po -o lastlog.8.xml ../lastlog.8.xml sed -i 's:\(^:\1 lang="it">:' lastlog.8.xml if grep -q SHADOW-CONFIG-HERE lastlog.8.xml; then \ sed -e 's/^/%config;/' lastlog.8.xml > lastlog.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' lastlog.8.xml > lastlog.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl lastlog.8.xml-config Note: Writing man8/lastlog.8 xml2po --expand-all-entities -l it -p ../po/it.po -o login.1.xml ../login.1.xml sed -i 's:\(^:\1 lang="it">:' login.1.xml if grep -q SHADOW-CONFIG-HERE login.1.xml; then \ sed -e 's/^/%config;/' login.1.xml > login.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' login.1.xml > login.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl login.1.xml-config Note: Writing man1/login.1 xml2po --expand-all-entities -l it -p ../po/it.po -o login.defs.5.xml ../login.defs.5.xml sed -i 's:\(^:\1 lang="it">:' login.defs.5.xml if grep -q SHADOW-CONFIG-HERE login.defs.5.xml; then \ sed -e 's/^/%config;/' login.defs.5.xml > login.defs.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' login.defs.5.xml > login.defs.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl login.defs.5.xml-config Note: Writing man5/login.defs.5 xml2po --expand-all-entities -l it -p ../po/it.po -o logoutd.8.xml ../logoutd.8.xml sed -i 's:\(^:\1 lang="it">:' logoutd.8.xml if grep -q SHADOW-CONFIG-HERE logoutd.8.xml; then \ sed -e 's/^/%config;/' logoutd.8.xml > logoutd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' logoutd.8.xml > logoutd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl logoutd.8.xml-config Note: Writing man8/logoutd.8 xml2po --expand-all-entities -l it -p ../po/it.po -o newgrp.1.xml ../newgrp.1.xml sed -i 's:\(^:\1 lang="it">:' newgrp.1.xml if grep -q SHADOW-CONFIG-HERE newgrp.1.xml; then \ sed -e 's/^/%config;/' newgrp.1.xml > newgrp.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' newgrp.1.xml > newgrp.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl newgrp.1.xml-config Note: Writing man1/newgrp.1 xml2po --expand-all-entities -l it -p ../po/it.po -o newusers.8.xml ../newusers.8.xml sed -i 's:\(^:\1 lang="it">:' newusers.8.xml if grep -q SHADOW-CONFIG-HERE newusers.8.xml; then \ sed -e 's/^/%config;/' newusers.8.xml > newusers.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' newusers.8.xml > newusers.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl newusers.8.xml-config Note: Writing man8/newusers.8 xml2po --expand-all-entities -l it -p ../po/it.po -o nologin.8.xml ../nologin.8.xml sed -i 's:\(^:\1 lang="it">:' nologin.8.xml if grep -q SHADOW-CONFIG-HERE nologin.8.xml; then \ sed -e 's/^/%config;/' nologin.8.xml > nologin.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' nologin.8.xml > nologin.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl nologin.8.xml-config Note: Writing man8/nologin.8 xml2po --expand-all-entities -l it -p ../po/it.po -o passwd.1.xml ../passwd.1.xml sed -i 's:\(^:\1 lang="it">:' passwd.1.xml if grep -q SHADOW-CONFIG-HERE passwd.1.xml; then \ sed -e 's/^/%config;/' passwd.1.xml > passwd.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' passwd.1.xml > passwd.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl passwd.1.xml-config Note: Writing man1/passwd.1 xml2po --expand-all-entities -l it -p ../po/it.po -o passwd.5.xml ../passwd.5.xml sed -i 's:\(^:\1 lang="it">:' passwd.5.xml if grep -q SHADOW-CONFIG-HERE passwd.5.xml; then \ sed -e 's/^/%config;/' passwd.5.xml > passwd.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' passwd.5.xml > passwd.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl passwd.5.xml-config Note: Writing man5/passwd.5 xml2po --expand-all-entities -l it -p ../po/it.po -o pwck.8.xml ../pwck.8.xml sed -i 's:\(^:\1 lang="it">:' pwck.8.xml if grep -q SHADOW-CONFIG-HERE pwck.8.xml; then \ sed -e 's/^/%config;/' pwck.8.xml > pwck.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' pwck.8.xml > pwck.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl pwck.8.xml-config Note: Writing man8/pwck.8 xml2po --expand-all-entities -l it -p ../po/it.po -o sg.1.xml ../sg.1.xml sed -i 's:\(^:\1 lang="it">:' sg.1.xml if grep -q SHADOW-CONFIG-HERE sg.1.xml; then \ sed -e 's/^/%config;/' sg.1.xml > sg.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' sg.1.xml > sg.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl sg.1.xml-config Note: Writing man1/sg.1 xml2po --expand-all-entities -l it -p ../po/it.po -o shadow.5.xml ../shadow.5.xml sed -i 's:\(^:\1 lang="it">:' shadow.5.xml if grep -q SHADOW-CONFIG-HERE shadow.5.xml; then \ sed -e 's/^/%config;/' shadow.5.xml > shadow.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' shadow.5.xml > shadow.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl shadow.5.xml-config Note: Writing man5/shadow.5 xml2po --expand-all-entities -l it -p ../po/it.po -o su.1.xml ../su.1.xml sed -i 's:\(^:\1 lang="it">:' su.1.xml if grep -q SHADOW-CONFIG-HERE su.1.xml; then \ sed -e 's/^/%config;/' su.1.xml > su.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' su.1.xml > su.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl su.1.xml-config Note: Writing man1/su.1 xml2po --expand-all-entities -l it -p ../po/it.po -o suauth.5.xml ../suauth.5.xml sed -i 's:\(^:\1 lang="it">:' suauth.5.xml if grep -q SHADOW-CONFIG-HERE suauth.5.xml; then \ sed -e 's/^/%config;/' suauth.5.xml > suauth.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' suauth.5.xml > suauth.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl suauth.5.xml-config Note: Writing man5/suauth.5 xml2po --expand-all-entities -l it -p ../po/it.po -o useradd.8.xml ../useradd.8.xml sed -i 's:\(^:\1 lang="it">:' useradd.8.xml if grep -q SHADOW-CONFIG-HERE useradd.8.xml; then \ sed -e 's/^/%config;/' useradd.8.xml > useradd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' useradd.8.xml > useradd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl useradd.8.xml-config Note: Writing man8/useradd.8 xml2po --expand-all-entities -l it -p ../po/it.po -o userdel.8.xml ../userdel.8.xml sed -i 's:\(^:\1 lang="it">:' userdel.8.xml if grep -q SHADOW-CONFIG-HERE userdel.8.xml; then \ sed -e 's/^/%config;/' userdel.8.xml > userdel.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' userdel.8.xml > userdel.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl userdel.8.xml-config Note: Writing man8/userdel.8 xml2po --expand-all-entities -l it -p ../po/it.po -o usermod.8.xml ../usermod.8.xml sed -i 's:\(^:\1 lang="it">:' usermod.8.xml if grep -q SHADOW-CONFIG-HERE usermod.8.xml; then \ sed -e 's/^/%config;/' usermod.8.xml > usermod.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' usermod.8.xml > usermod.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl usermod.8.xml-config Note: Writing man8/usermod.8 xml2po --expand-all-entities -l it -p ../po/it.po -o vipw.8.xml ../vipw.8.xml sed -i 's:\(^:\1 lang="it">:' vipw.8.xml if grep -q SHADOW-CONFIG-HERE vipw.8.xml; then \ sed -e 's/^/%config;/' vipw.8.xml > vipw.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' vipw.8.xml > vipw.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl vipw.8.xml-config Note: Writing man8/vipw.8 Note: Writing man8/vigr.8 (soelim stub) rm chsh.1.xml pwck.8.xml faillog.8.xml chgpasswd.8.xml chpasswd.8.xml login.1.xml grpck.8.xml-config usermod.8.xml-config logoutd.8.xml lastlog.8.xml-config vipw.8.xml groupdel.8.xml-config passwd.1.xml-config gpasswd.1.xml-config newusers.8.xml-config groupmod.8.xml-config gshadow.5.xml sg.1.xml-config pwconv.8.xml-config lastlog.8.xml chfn.1.xml-config passwd.5.xml userdel.8.xml-config shadow.3.xml chage.1.xml-config groupmems.8.xml chsh.1.xml-config login.defs.5.xml pwck.8.xml-config shadow.5.xml groupadd.8.xml chgpasswd.8.xml-config chpasswd.8.xml-config login.1.xml-config su.1.xml-config logoutd.8.xml-config expiry.1.xml-config login.defs.5.xml-config expiry.1.xml nologin.8.xml userdel.8.xml useradd.8.xml-config grpck.8.xml passwd.5.xml-config gshadow.5.xml-config groupdel.8.xml groups.1.xml newgrp.1.xml newusers.8.xml su.1.xml faillog.5.xml sg.1.xml shadow.3.xml-config groupmems.8.xml-config nologin.8.xml-config vipw.8.xml-config suauth.5.xml shadow.5.xml-config groupadd.8.xml-config usermod.8.xml passwd.1.xml groupmod.8.xml groups.1.xml-config gpasswd.1.xml pwconv.8.xml useradd.8.xml newgrp.1.xml-config faillog.8.xml-config chfn.1.xml suauth.5.xml-config faillog.5.xml-config chage.1.xml make[4]: Leaving directory '/build/shadow-4.5/man/it' Making all in ja make[4]: Entering directory '/build/shadow-4.5/man/ja' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/shadow-4.5/man/ja' Making all in ko make[4]: Entering directory '/build/shadow-4.5/man/ko' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/shadow-4.5/man/ko' Making all in pl make[4]: Entering directory '/build/shadow-4.5/man/pl' /usr/bin/make -C .. config.xml make[5]: Entering directory '/build/shadow-4.5/man' make[5]: 'config.xml' is up to date. make[5]: Leaving directory '/build/shadow-4.5/man' cp ../config.xml config.xml xml2po --expand-all-entities -l pl -p ../po/pl.po -o chage.1.xml ../chage.1.xml sed -i 's:\(^:\1 lang="pl">:' chage.1.xml if grep -q SHADOW-CONFIG-HERE chage.1.xml; then \ sed -e 's/^/%config;/' chage.1.xml > chage.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chage.1.xml > chage.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chage.1.xml-config Note: Writing man1/chage.1 xml2po --expand-all-entities -l pl -p ../po/pl.po -o chsh.1.xml ../chsh.1.xml sed -i 's:\(^:\1 lang="pl">:' chsh.1.xml if grep -q SHADOW-CONFIG-HERE chsh.1.xml; then \ sed -e 's/^/%config;/' chsh.1.xml > chsh.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chsh.1.xml > chsh.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chsh.1.xml-config Note: Writing man1/chsh.1 xml2po --expand-all-entities -l pl -p ../po/pl.po -o expiry.1.xml ../expiry.1.xml sed -i 's:\(^:\1 lang="pl">:' expiry.1.xml if grep -q SHADOW-CONFIG-HERE expiry.1.xml; then \ sed -e 's/^/%config;/' expiry.1.xml > expiry.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' expiry.1.xml > expiry.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl expiry.1.xml-config Note: Writing man1/expiry.1 xml2po --expand-all-entities -l pl -p ../po/pl.po -o faillog.5.xml ../faillog.5.xml sed -i 's:\(^:\1 lang="pl">:' faillog.5.xml if grep -q SHADOW-CONFIG-HERE faillog.5.xml; then \ sed -e 's/^/%config;/' faillog.5.xml > faillog.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' faillog.5.xml > faillog.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl faillog.5.xml-config Note: Writing man5/faillog.5 xml2po --expand-all-entities -l pl -p ../po/pl.po -o faillog.8.xml ../faillog.8.xml sed -i 's:\(^:\1 lang="pl">:' faillog.8.xml if grep -q SHADOW-CONFIG-HERE faillog.8.xml; then \ sed -e 's/^/%config;/' faillog.8.xml > faillog.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' faillog.8.xml > faillog.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl faillog.8.xml-config Note: Writing man8/faillog.8 xml2po --expand-all-entities -l pl -p ../po/pl.po -o shadow.3.xml ../shadow.3.xml sed -i 's:\(^:\1 lang="pl">:' shadow.3.xml if grep -q SHADOW-CONFIG-HERE shadow.3.xml; then \ sed -e 's/^/%config;/' shadow.3.xml > shadow.3.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' shadow.3.xml > shadow.3.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl shadow.3.xml-config Note: Writing man3/shadow.3 Note: Writing man3/getspnam.3 (soelim stub) xml2po --expand-all-entities -l pl -p ../po/pl.po -o groupadd.8.xml ../groupadd.8.xml sed -i 's:\(^:\1 lang="pl">:' groupadd.8.xml if grep -q SHADOW-CONFIG-HERE groupadd.8.xml; then \ sed -e 's/^/%config;/' groupadd.8.xml > groupadd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupadd.8.xml > groupadd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupadd.8.xml-config Note: Writing man8/groupadd.8 xml2po --expand-all-entities -l pl -p ../po/pl.po -o groupdel.8.xml ../groupdel.8.xml sed -i 's:\(^:\1 lang="pl">:' groupdel.8.xml if grep -q SHADOW-CONFIG-HERE groupdel.8.xml; then \ sed -e 's/^/%config;/' groupdel.8.xml > groupdel.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupdel.8.xml > groupdel.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupdel.8.xml-config Note: Writing man8/groupdel.8 xml2po --expand-all-entities -l pl -p ../po/pl.po -o groupmems.8.xml ../groupmems.8.xml sed -i 's:\(^:\1 lang="pl">:' groupmems.8.xml if grep -q SHADOW-CONFIG-HERE groupmems.8.xml; then \ sed -e 's/^/%config;/' groupmems.8.xml > groupmems.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupmems.8.xml > groupmems.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupmems.8.xml-config Note: Writing man8/groupmems.8 xml2po --expand-all-entities -l pl -p ../po/pl.po -o groupmod.8.xml ../groupmod.8.xml sed -i 's:\(^:\1 lang="pl">:' groupmod.8.xml if grep -q SHADOW-CONFIG-HERE groupmod.8.xml; then \ sed -e 's/^/%config;/' groupmod.8.xml > groupmod.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupmod.8.xml > groupmod.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupmod.8.xml-config Note: Writing man8/groupmod.8 xml2po --expand-all-entities -l pl -p ../po/pl.po -o groups.1.xml ../groups.1.xml sed -i 's:\(^:\1 lang="pl">:' groups.1.xml if grep -q SHADOW-CONFIG-HERE groups.1.xml; then \ sed -e 's/^/%config;/' groups.1.xml > groups.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groups.1.xml > groups.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groups.1.xml-config Note: Writing man1/groups.1 xml2po --expand-all-entities -l pl -p ../po/pl.po -o grpck.8.xml ../grpck.8.xml sed -i 's:\(^:\1 lang="pl">:' grpck.8.xml if grep -q SHADOW-CONFIG-HERE grpck.8.xml; then \ sed -e 's/^/%config;/' grpck.8.xml > grpck.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' grpck.8.xml > grpck.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl grpck.8.xml-config Note: Writing man8/grpck.8 xml2po --expand-all-entities -l pl -p ../po/pl.po -o lastlog.8.xml ../lastlog.8.xml sed -i 's:\(^:\1 lang="pl">:' lastlog.8.xml if grep -q SHADOW-CONFIG-HERE lastlog.8.xml; then \ sed -e 's/^/%config;/' lastlog.8.xml > lastlog.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' lastlog.8.xml > lastlog.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl lastlog.8.xml-config Note: Writing man8/lastlog.8 xml2po --expand-all-entities -l pl -p ../po/pl.po -o logoutd.8.xml ../logoutd.8.xml sed -i 's:\(^:\1 lang="pl">:' logoutd.8.xml if grep -q SHADOW-CONFIG-HERE logoutd.8.xml; then \ sed -e 's/^/%config;/' logoutd.8.xml > logoutd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' logoutd.8.xml > logoutd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl logoutd.8.xml-config Note: Writing man8/logoutd.8 xml2po --expand-all-entities -l pl -p ../po/pl.po -o newgrp.1.xml ../newgrp.1.xml sed -i 's:\(^:\1 lang="pl">:' newgrp.1.xml if grep -q SHADOW-CONFIG-HERE newgrp.1.xml; then \ sed -e 's/^/%config;/' newgrp.1.xml > newgrp.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' newgrp.1.xml > newgrp.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl newgrp.1.xml-config Note: Writing man1/newgrp.1 xml2po --expand-all-entities -l pl -p ../po/pl.po -o sg.1.xml ../sg.1.xml sed -i 's:\(^:\1 lang="pl">:' sg.1.xml if grep -q SHADOW-CONFIG-HERE sg.1.xml; then \ sed -e 's/^/%config;/' sg.1.xml > sg.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' sg.1.xml > sg.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl sg.1.xml-config Note: Writing man1/sg.1 xml2po --expand-all-entities -l pl -p ../po/pl.po -o userdel.8.xml ../userdel.8.xml sed -i 's:\(^:\1 lang="pl">:' userdel.8.xml if grep -q SHADOW-CONFIG-HERE userdel.8.xml; then \ sed -e 's/^/%config;/' userdel.8.xml > userdel.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' userdel.8.xml > userdel.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl userdel.8.xml-config Note: Writing man8/userdel.8 xml2po --expand-all-entities -l pl -p ../po/pl.po -o usermod.8.xml ../usermod.8.xml sed -i 's:\(^:\1 lang="pl">:' usermod.8.xml if grep -q SHADOW-CONFIG-HERE usermod.8.xml; then \ sed -e 's/^/%config;/' usermod.8.xml > usermod.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' usermod.8.xml > usermod.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl usermod.8.xml-config Note: Writing man8/usermod.8 xml2po --expand-all-entities -l pl -p ../po/pl.po -o vipw.8.xml ../vipw.8.xml sed -i 's:\(^:\1 lang="pl">:' vipw.8.xml if grep -q SHADOW-CONFIG-HERE vipw.8.xml; then \ sed -e 's/^/%config;/' vipw.8.xml > vipw.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' vipw.8.xml > vipw.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl vipw.8.xml-config Note: Writing man8/vipw.8 Note: Writing man8/vigr.8 (soelim stub) rm chsh.1.xml faillog.8.xml sg.1.xml grpck.8.xml-config usermod.8.xml-config logoutd.8.xml lastlog.8.xml-config vipw.8.xml groupmod.8.xml-config lastlog.8.xml userdel.8.xml-config shadow.3.xml groupdel.8.xml-config chage.1.xml-config groupmems.8.xml chsh.1.xml-config groupadd.8.xml sg.1.xml-config logoutd.8.xml-config expiry.1.xml-config expiry.1.xml userdel.8.xml grpck.8.xml groupdel.8.xml groups.1.xml newgrp.1.xml faillog.5.xml shadow.3.xml-config groupmems.8.xml-config vipw.8.xml-config groupadd.8.xml-config usermod.8.xml groupmod.8.xml groups.1.xml-config newgrp.1.xml-config faillog.8.xml-config faillog.5.xml-config chage.1.xml make[4]: Leaving directory '/build/shadow-4.5/man/pl' Making all in pt_BR make[4]: Entering directory '/build/shadow-4.5/man/pt_BR' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/shadow-4.5/man/pt_BR' Making all in ru make[4]: Entering directory '/build/shadow-4.5/man/ru' /usr/bin/make -C .. config.xml make[5]: Entering directory '/build/shadow-4.5/man' make[5]: 'config.xml' is up to date. make[5]: Leaving directory '/build/shadow-4.5/man' cp ../config.xml config.xml xml2po --expand-all-entities -l ru -p ../po/ru.po -o chage.1.xml ../chage.1.xml sed -i 's:\(^:\1 lang="ru">:' chage.1.xml if grep -q SHADOW-CONFIG-HERE chage.1.xml; then \ sed -e 's/^/%config;/' chage.1.xml > chage.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chage.1.xml > chage.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chage.1.xml-config Note: Writing man1/chage.1 xml2po --expand-all-entities -l ru -p ../po/ru.po -o chfn.1.xml ../chfn.1.xml sed -i 's:\(^:\1 lang="ru">:' chfn.1.xml if grep -q SHADOW-CONFIG-HERE chfn.1.xml; then \ sed -e 's/^/%config;/' chfn.1.xml > chfn.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chfn.1.xml > chfn.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chfn.1.xml-config Note: Writing man1/chfn.1 xml2po --expand-all-entities -l ru -p ../po/ru.po -o chgpasswd.8.xml ../chgpasswd.8.xml sed -i 's:\(^:\1 lang="ru">:' chgpasswd.8.xml if grep -q SHADOW-CONFIG-HERE chgpasswd.8.xml; then \ sed -e 's/^/%config;/' chgpasswd.8.xml > chgpasswd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chgpasswd.8.xml > chgpasswd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chgpasswd.8.xml-config Note: Writing man8/chgpasswd.8 xml2po --expand-all-entities -l ru -p ../po/ru.po -o chpasswd.8.xml ../chpasswd.8.xml sed -i 's:\(^:\1 lang="ru">:' chpasswd.8.xml if grep -q SHADOW-CONFIG-HERE chpasswd.8.xml; then \ sed -e 's/^/%config;/' chpasswd.8.xml > chpasswd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chpasswd.8.xml > chpasswd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chpasswd.8.xml-config Note: Writing man8/chpasswd.8 xml2po --expand-all-entities -l ru -p ../po/ru.po -o chsh.1.xml ../chsh.1.xml sed -i 's:\(^:\1 lang="ru">:' chsh.1.xml if grep -q SHADOW-CONFIG-HERE chsh.1.xml; then \ sed -e 's/^/%config;/' chsh.1.xml > chsh.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chsh.1.xml > chsh.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chsh.1.xml-config Note: Writing man1/chsh.1 xml2po --expand-all-entities -l ru -p ../po/ru.po -o expiry.1.xml ../expiry.1.xml sed -i 's:\(^:\1 lang="ru">:' expiry.1.xml if grep -q SHADOW-CONFIG-HERE expiry.1.xml; then \ sed -e 's/^/%config;/' expiry.1.xml > expiry.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' expiry.1.xml > expiry.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl expiry.1.xml-config Note: Writing man1/expiry.1 xml2po --expand-all-entities -l ru -p ../po/ru.po -o faillog.5.xml ../faillog.5.xml sed -i 's:\(^:\1 lang="ru">:' faillog.5.xml if grep -q SHADOW-CONFIG-HERE faillog.5.xml; then \ sed -e 's/^/%config;/' faillog.5.xml > faillog.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' faillog.5.xml > faillog.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl faillog.5.xml-config Note: Writing man5/faillog.5 xml2po --expand-all-entities -l ru -p ../po/ru.po -o faillog.8.xml ../faillog.8.xml sed -i 's:\(^:\1 lang="ru">:' faillog.8.xml if grep -q SHADOW-CONFIG-HERE faillog.8.xml; then \ sed -e 's/^/%config;/' faillog.8.xml > faillog.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' faillog.8.xml > faillog.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl faillog.8.xml-config Note: Writing man8/faillog.8 xml2po --expand-all-entities -l ru -p ../po/ru.po -o shadow.3.xml ../shadow.3.xml sed -i 's:\(^:\1 lang="ru">:' shadow.3.xml if grep -q SHADOW-CONFIG-HERE shadow.3.xml; then \ sed -e 's/^/%config;/' shadow.3.xml > shadow.3.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' shadow.3.xml > shadow.3.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl shadow.3.xml-config Note: Writing man3/shadow.3 Note: Writing man3/getspnam.3 (soelim stub) xml2po --expand-all-entities -l ru -p ../po/ru.po -o gpasswd.1.xml ../gpasswd.1.xml sed -i 's:\(^:\1 lang="ru">:' gpasswd.1.xml if grep -q SHADOW-CONFIG-HERE gpasswd.1.xml; then \ sed -e 's/^/%config;/' gpasswd.1.xml > gpasswd.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' gpasswd.1.xml > gpasswd.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl gpasswd.1.xml-config Note: Writing man1/gpasswd.1 xml2po --expand-all-entities -l ru -p ../po/ru.po -o groupadd.8.xml ../groupadd.8.xml sed -i 's:\(^:\1 lang="ru">:' groupadd.8.xml if grep -q SHADOW-CONFIG-HERE groupadd.8.xml; then \ sed -e 's/^/%config;/' groupadd.8.xml > groupadd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupadd.8.xml > groupadd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupadd.8.xml-config Note: Writing man8/groupadd.8 xml2po --expand-all-entities -l ru -p ../po/ru.po -o groupdel.8.xml ../groupdel.8.xml sed -i 's:\(^:\1 lang="ru">:' groupdel.8.xml if grep -q SHADOW-CONFIG-HERE groupdel.8.xml; then \ sed -e 's/^/%config;/' groupdel.8.xml > groupdel.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupdel.8.xml > groupdel.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupdel.8.xml-config Note: Writing man8/groupdel.8 xml2po --expand-all-entities -l ru -p ../po/ru.po -o groupmems.8.xml ../groupmems.8.xml sed -i 's:\(^:\1 lang="ru">:' groupmems.8.xml if grep -q SHADOW-CONFIG-HERE groupmems.8.xml; then \ sed -e 's/^/%config;/' groupmems.8.xml > groupmems.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupmems.8.xml > groupmems.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupmems.8.xml-config Note: Writing man8/groupmems.8 xml2po --expand-all-entities -l ru -p ../po/ru.po -o groupmod.8.xml ../groupmod.8.xml sed -i 's:\(^:\1 lang="ru">:' groupmod.8.xml if grep -q SHADOW-CONFIG-HERE groupmod.8.xml; then \ sed -e 's/^/%config;/' groupmod.8.xml > groupmod.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupmod.8.xml > groupmod.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupmod.8.xml-config Note: Writing man8/groupmod.8 xml2po --expand-all-entities -l ru -p ../po/ru.po -o groups.1.xml ../groups.1.xml sed -i 's:\(^:\1 lang="ru">:' groups.1.xml if grep -q SHADOW-CONFIG-HERE groups.1.xml; then \ sed -e 's/^/%config;/' groups.1.xml > groups.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groups.1.xml > groups.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groups.1.xml-config Note: Writing man1/groups.1 xml2po --expand-all-entities -l ru -p ../po/ru.po -o grpck.8.xml ../grpck.8.xml sed -i 's:\(^:\1 lang="ru">:' grpck.8.xml if grep -q SHADOW-CONFIG-HERE grpck.8.xml; then \ sed -e 's/^/%config;/' grpck.8.xml > grpck.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' grpck.8.xml > grpck.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl grpck.8.xml-config Note: Writing man8/grpck.8 xml2po --expand-all-entities -l ru -p ../po/ru.po -o pwconv.8.xml ../pwconv.8.xml sed -i 's:\(^:\1 lang="ru">:' pwconv.8.xml if grep -q SHADOW-CONFIG-HERE pwconv.8.xml; then \ sed -e 's/^/%config;/' pwconv.8.xml > pwconv.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' pwconv.8.xml > pwconv.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl pwconv.8.xml-config Note: Writing man8/pwconv.8 Note: Writing man8/pwunconv.8 (soelim stub) Note: Writing man8/grpconv.8 (soelim stub) Note: Writing man8/grpunconv.8 (soelim stub) xml2po --expand-all-entities -l ru -p ../po/ru.po -o gshadow.5.xml ../gshadow.5.xml sed -i 's:\(^:\1 lang="ru">:' gshadow.5.xml if grep -q SHADOW-CONFIG-HERE gshadow.5.xml; then \ sed -e 's/^/%config;/' gshadow.5.xml > gshadow.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' gshadow.5.xml > gshadow.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl gshadow.5.xml-config Note: Writing man5/gshadow.5 xml2po --expand-all-entities -l ru -p ../po/ru.po -o lastlog.8.xml ../lastlog.8.xml sed -i 's:\(^:\1 lang="ru">:' lastlog.8.xml if grep -q SHADOW-CONFIG-HERE lastlog.8.xml; then \ sed -e 's/^/%config;/' lastlog.8.xml > lastlog.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' lastlog.8.xml > lastlog.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl lastlog.8.xml-config Note: Writing man8/lastlog.8 xml2po --expand-all-entities -l ru -p ../po/ru.po -o login.1.xml ../login.1.xml sed -i 's:\(^:\1 lang="ru">:' login.1.xml if grep -q SHADOW-CONFIG-HERE login.1.xml; then \ sed -e 's/^/%config;/' login.1.xml > login.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' login.1.xml > login.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl login.1.xml-config Note: Writing man1/login.1 xml2po --expand-all-entities -l ru -p ../po/ru.po -o login.defs.5.xml ../login.defs.5.xml sed -i 's:\(^:\1 lang="ru">:' login.defs.5.xml if grep -q SHADOW-CONFIG-HERE login.defs.5.xml; then \ sed -e 's/^/%config;/' login.defs.5.xml > login.defs.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' login.defs.5.xml > login.defs.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl login.defs.5.xml-config Note: Writing man5/login.defs.5 xml2po --expand-all-entities -l ru -p ../po/ru.po -o logoutd.8.xml ../logoutd.8.xml sed -i 's:\(^:\1 lang="ru">:' logoutd.8.xml if grep -q SHADOW-CONFIG-HERE logoutd.8.xml; then \ sed -e 's/^/%config;/' logoutd.8.xml > logoutd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' logoutd.8.xml > logoutd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl logoutd.8.xml-config Note: Writing man8/logoutd.8 xml2po --expand-all-entities -l ru -p ../po/ru.po -o newgrp.1.xml ../newgrp.1.xml sed -i 's:\(^:\1 lang="ru">:' newgrp.1.xml if grep -q SHADOW-CONFIG-HERE newgrp.1.xml; then \ sed -e 's/^/%config;/' newgrp.1.xml > newgrp.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' newgrp.1.xml > newgrp.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl newgrp.1.xml-config Note: Writing man1/newgrp.1 xml2po --expand-all-entities -l ru -p ../po/ru.po -o newusers.8.xml ../newusers.8.xml sed -i 's:\(^:\1 lang="ru">:' newusers.8.xml if grep -q SHADOW-CONFIG-HERE newusers.8.xml; then \ sed -e 's/^/%config;/' newusers.8.xml > newusers.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' newusers.8.xml > newusers.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl newusers.8.xml-config Note: Writing man8/newusers.8 xml2po --expand-all-entities -l ru -p ../po/ru.po -o nologin.8.xml ../nologin.8.xml sed -i 's:\(^:\1 lang="ru">:' nologin.8.xml if grep -q SHADOW-CONFIG-HERE nologin.8.xml; then \ sed -e 's/^/%config;/' nologin.8.xml > nologin.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' nologin.8.xml > nologin.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl nologin.8.xml-config Note: Writing man8/nologin.8 xml2po --expand-all-entities -l ru -p ../po/ru.po -o passwd.1.xml ../passwd.1.xml sed -i 's:\(^:\1 lang="ru">:' passwd.1.xml if grep -q SHADOW-CONFIG-HERE passwd.1.xml; then \ sed -e 's/^/%config;/' passwd.1.xml > passwd.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' passwd.1.xml > passwd.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl passwd.1.xml-config Note: Writing man1/passwd.1 xml2po --expand-all-entities -l ru -p ../po/ru.po -o passwd.5.xml ../passwd.5.xml sed -i 's:\(^:\1 lang="ru">:' passwd.5.xml if grep -q SHADOW-CONFIG-HERE passwd.5.xml; then \ sed -e 's/^/%config;/' passwd.5.xml > passwd.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' passwd.5.xml > passwd.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl passwd.5.xml-config Note: Writing man5/passwd.5 xml2po --expand-all-entities -l ru -p ../po/ru.po -o pwck.8.xml ../pwck.8.xml sed -i 's:\(^:\1 lang="ru">:' pwck.8.xml if grep -q SHADOW-CONFIG-HERE pwck.8.xml; then \ sed -e 's/^/%config;/' pwck.8.xml > pwck.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' pwck.8.xml > pwck.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl pwck.8.xml-config Note: Writing man8/pwck.8 xml2po --expand-all-entities -l ru -p ../po/ru.po -o sg.1.xml ../sg.1.xml sed -i 's:\(^:\1 lang="ru">:' sg.1.xml if grep -q SHADOW-CONFIG-HERE sg.1.xml; then \ sed -e 's/^/%config;/' sg.1.xml > sg.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' sg.1.xml > sg.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl sg.1.xml-config Note: Writing man1/sg.1 xml2po --expand-all-entities -l ru -p ../po/ru.po -o shadow.5.xml ../shadow.5.xml sed -i 's:\(^:\1 lang="ru">:' shadow.5.xml if grep -q SHADOW-CONFIG-HERE shadow.5.xml; then \ sed -e 's/^/%config;/' shadow.5.xml > shadow.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' shadow.5.xml > shadow.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl shadow.5.xml-config Note: Writing man5/shadow.5 xml2po --expand-all-entities -l ru -p ../po/ru.po -o su.1.xml ../su.1.xml sed -i 's:\(^:\1 lang="ru">:' su.1.xml if grep -q SHADOW-CONFIG-HERE su.1.xml; then \ sed -e 's/^/%config;/' su.1.xml > su.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' su.1.xml > su.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl su.1.xml-config Note: Writing man1/su.1 xml2po --expand-all-entities -l ru -p ../po/ru.po -o suauth.5.xml ../suauth.5.xml sed -i 's:\(^:\1 lang="ru">:' suauth.5.xml if grep -q SHADOW-CONFIG-HERE suauth.5.xml; then \ sed -e 's/^/%config;/' suauth.5.xml > suauth.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' suauth.5.xml > suauth.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl suauth.5.xml-config Note: Writing man5/suauth.5 xml2po --expand-all-entities -l ru -p ../po/ru.po -o useradd.8.xml ../useradd.8.xml sed -i 's:\(^:\1 lang="ru">:' useradd.8.xml if grep -q SHADOW-CONFIG-HERE useradd.8.xml; then \ sed -e 's/^/%config;/' useradd.8.xml > useradd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' useradd.8.xml > useradd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl useradd.8.xml-config Note: Writing man8/useradd.8 xml2po --expand-all-entities -l ru -p ../po/ru.po -o userdel.8.xml ../userdel.8.xml sed -i 's:\(^:\1 lang="ru">:' userdel.8.xml if grep -q SHADOW-CONFIG-HERE userdel.8.xml; then \ sed -e 's/^/%config;/' userdel.8.xml > userdel.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' userdel.8.xml > userdel.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl userdel.8.xml-config Note: Writing man8/userdel.8 xml2po --expand-all-entities -l ru -p ../po/ru.po -o usermod.8.xml ../usermod.8.xml sed -i 's:\(^:\1 lang="ru">:' usermod.8.xml if grep -q SHADOW-CONFIG-HERE usermod.8.xml; then \ sed -e 's/^/%config;/' usermod.8.xml > usermod.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' usermod.8.xml > usermod.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl usermod.8.xml-config Note: Writing man8/usermod.8 xml2po --expand-all-entities -l ru -p ../po/ru.po -o vipw.8.xml ../vipw.8.xml sed -i 's:\(^:\1 lang="ru">:' vipw.8.xml if grep -q SHADOW-CONFIG-HERE vipw.8.xml; then \ sed -e 's/^/%config;/' vipw.8.xml > vipw.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' vipw.8.xml > vipw.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl vipw.8.xml-config Note: Writing man8/vipw.8 Note: Writing man8/vigr.8 (soelim stub) rm chsh.1.xml pwck.8.xml faillog.8.xml chgpasswd.8.xml chpasswd.8.xml login.1.xml grpck.8.xml-config usermod.8.xml-config logoutd.8.xml lastlog.8.xml-config vipw.8.xml groupdel.8.xml-config passwd.1.xml-config gpasswd.1.xml-config newusers.8.xml-config groupmod.8.xml-config gshadow.5.xml sg.1.xml-config pwconv.8.xml-config lastlog.8.xml chfn.1.xml-config passwd.5.xml userdel.8.xml-config shadow.3.xml chage.1.xml-config groupmems.8.xml chsh.1.xml-config login.defs.5.xml pwck.8.xml-config shadow.5.xml groupadd.8.xml chgpasswd.8.xml-config chpasswd.8.xml-config login.1.xml-config su.1.xml-config logoutd.8.xml-config expiry.1.xml-config login.defs.5.xml-config expiry.1.xml nologin.8.xml userdel.8.xml useradd.8.xml-config grpck.8.xml passwd.5.xml-config gshadow.5.xml-config chfn.1.xml groupdel.8.xml groups.1.xml newgrp.1.xml newusers.8.xml su.1.xml faillog.5.xml sg.1.xml shadow.3.xml-config groupmems.8.xml-config nologin.8.xml-config vipw.8.xml-config suauth.5.xml shadow.5.xml-config groupadd.8.xml-config usermod.8.xml passwd.1.xml groupmod.8.xml groups.1.xml-config gpasswd.1.xml pwconv.8.xml useradd.8.xml newgrp.1.xml-config faillog.8.xml-config suauth.5.xml-config faillog.5.xml-config chage.1.xml make[4]: Leaving directory '/build/shadow-4.5/man/ru' Making all in sv make[4]: Entering directory '/build/shadow-4.5/man/sv' /usr/bin/make -C .. config.xml make[5]: Entering directory '/build/shadow-4.5/man' make[5]: 'config.xml' is up to date. make[5]: Leaving directory '/build/shadow-4.5/man' cp ../config.xml config.xml xml2po --expand-all-entities -l sv -p ../po/sv.po -o chage.1.xml ../chage.1.xml sed -i 's:\(^:\1 lang="sv">:' chage.1.xml if grep -q SHADOW-CONFIG-HERE chage.1.xml; then \ sed -e 's/^/%config;/' chage.1.xml > chage.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chage.1.xml > chage.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chage.1.xml-config Note: Writing man1/chage.1 xml2po --expand-all-entities -l sv -p ../po/sv.po -o chsh.1.xml ../chsh.1.xml sed -i 's:\(^:\1 lang="sv">:' chsh.1.xml if grep -q SHADOW-CONFIG-HERE chsh.1.xml; then \ sed -e 's/^/%config;/' chsh.1.xml > chsh.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chsh.1.xml > chsh.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chsh.1.xml-config Note: Writing man1/chsh.1 xml2po --expand-all-entities -l sv -p ../po/sv.po -o expiry.1.xml ../expiry.1.xml sed -i 's:\(^:\1 lang="sv">:' expiry.1.xml if grep -q SHADOW-CONFIG-HERE expiry.1.xml; then \ sed -e 's/^/%config;/' expiry.1.xml > expiry.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' expiry.1.xml > expiry.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl expiry.1.xml-config Note: Writing man1/expiry.1 xml2po --expand-all-entities -l sv -p ../po/sv.po -o faillog.5.xml ../faillog.5.xml sed -i 's:\(^:\1 lang="sv">:' faillog.5.xml if grep -q SHADOW-CONFIG-HERE faillog.5.xml; then \ sed -e 's/^/%config;/' faillog.5.xml > faillog.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' faillog.5.xml > faillog.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl faillog.5.xml-config Note: Writing man5/faillog.5 xml2po --expand-all-entities -l sv -p ../po/sv.po -o faillog.8.xml ../faillog.8.xml sed -i 's:\(^:\1 lang="sv">:' faillog.8.xml if grep -q SHADOW-CONFIG-HERE faillog.8.xml; then \ sed -e 's/^/%config;/' faillog.8.xml > faillog.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' faillog.8.xml > faillog.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl faillog.8.xml-config Note: Writing man8/faillog.8 xml2po --expand-all-entities -l sv -p ../po/sv.po -o shadow.3.xml ../shadow.3.xml sed -i 's:\(^:\1 lang="sv">:' shadow.3.xml if grep -q SHADOW-CONFIG-HERE shadow.3.xml; then \ sed -e 's/^/%config;/' shadow.3.xml > shadow.3.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' shadow.3.xml > shadow.3.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl shadow.3.xml-config Note: Writing man3/shadow.3 Note: Writing man3/getspnam.3 (soelim stub) xml2po --expand-all-entities -l sv -p ../po/sv.po -o groupadd.8.xml ../groupadd.8.xml sed -i 's:\(^:\1 lang="sv">:' groupadd.8.xml if grep -q SHADOW-CONFIG-HERE groupadd.8.xml; then \ sed -e 's/^/%config;/' groupadd.8.xml > groupadd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupadd.8.xml > groupadd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupadd.8.xml-config Note: Writing man8/groupadd.8 xml2po --expand-all-entities -l sv -p ../po/sv.po -o groupdel.8.xml ../groupdel.8.xml sed -i 's:\(^:\1 lang="sv">:' groupdel.8.xml if grep -q SHADOW-CONFIG-HERE groupdel.8.xml; then \ sed -e 's/^/%config;/' groupdel.8.xml > groupdel.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupdel.8.xml > groupdel.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupdel.8.xml-config Note: Writing man8/groupdel.8 xml2po --expand-all-entities -l sv -p ../po/sv.po -o groupmems.8.xml ../groupmems.8.xml sed -i 's:\(^:\1 lang="sv">:' groupmems.8.xml if grep -q SHADOW-CONFIG-HERE groupmems.8.xml; then \ sed -e 's/^/%config;/' groupmems.8.xml > groupmems.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupmems.8.xml > groupmems.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupmems.8.xml-config Note: Writing man8/groupmems.8 xml2po --expand-all-entities -l sv -p ../po/sv.po -o groupmod.8.xml ../groupmod.8.xml sed -i 's:\(^:\1 lang="sv">:' groupmod.8.xml if grep -q SHADOW-CONFIG-HERE groupmod.8.xml; then \ sed -e 's/^/%config;/' groupmod.8.xml > groupmod.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupmod.8.xml > groupmod.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupmod.8.xml-config Note: Writing man8/groupmod.8 xml2po --expand-all-entities -l sv -p ../po/sv.po -o groups.1.xml ../groups.1.xml sed -i 's:\(^:\1 lang="sv">:' groups.1.xml if grep -q SHADOW-CONFIG-HERE groups.1.xml; then \ sed -e 's/^/%config;/' groups.1.xml > groups.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groups.1.xml > groups.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groups.1.xml-config Note: Writing man1/groups.1 xml2po --expand-all-entities -l sv -p ../po/sv.po -o grpck.8.xml ../grpck.8.xml sed -i 's:\(^:\1 lang="sv">:' grpck.8.xml if grep -q SHADOW-CONFIG-HERE grpck.8.xml; then \ sed -e 's/^/%config;/' grpck.8.xml > grpck.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' grpck.8.xml > grpck.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl grpck.8.xml-config Note: Writing man8/grpck.8 xml2po --expand-all-entities -l sv -p ../po/sv.po -o gshadow.5.xml ../gshadow.5.xml sed -i 's:\(^:\1 lang="sv">:' gshadow.5.xml if grep -q SHADOW-CONFIG-HERE gshadow.5.xml; then \ sed -e 's/^/%config;/' gshadow.5.xml > gshadow.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' gshadow.5.xml > gshadow.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl gshadow.5.xml-config Note: Writing man5/gshadow.5 xml2po --expand-all-entities -l sv -p ../po/sv.po -o lastlog.8.xml ../lastlog.8.xml sed -i 's:\(^:\1 lang="sv">:' lastlog.8.xml if grep -q SHADOW-CONFIG-HERE lastlog.8.xml; then \ sed -e 's/^/%config;/' lastlog.8.xml > lastlog.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' lastlog.8.xml > lastlog.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl lastlog.8.xml-config Note: Writing man8/lastlog.8 xml2po --expand-all-entities -l sv -p ../po/sv.po -o logoutd.8.xml ../logoutd.8.xml sed -i 's:\(^:\1 lang="sv">:' logoutd.8.xml if grep -q SHADOW-CONFIG-HERE logoutd.8.xml; then \ sed -e 's/^/%config;/' logoutd.8.xml > logoutd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' logoutd.8.xml > logoutd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl logoutd.8.xml-config Note: Writing man8/logoutd.8 xml2po --expand-all-entities -l sv -p ../po/sv.po -o newgrp.1.xml ../newgrp.1.xml sed -i 's:\(^:\1 lang="sv">:' newgrp.1.xml if grep -q SHADOW-CONFIG-HERE newgrp.1.xml; then \ sed -e 's/^/%config;/' newgrp.1.xml > newgrp.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' newgrp.1.xml > newgrp.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl newgrp.1.xml-config Note: Writing man1/newgrp.1 xml2po --expand-all-entities -l sv -p ../po/sv.po -o nologin.8.xml ../nologin.8.xml sed -i 's:\(^:\1 lang="sv">:' nologin.8.xml if grep -q SHADOW-CONFIG-HERE nologin.8.xml; then \ sed -e 's/^/%config;/' nologin.8.xml > nologin.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' nologin.8.xml > nologin.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl nologin.8.xml-config Note: Writing man8/nologin.8 xml2po --expand-all-entities -l sv -p ../po/sv.po -o passwd.1.xml ../passwd.1.xml sed -i 's:\(^:\1 lang="sv">:' passwd.1.xml if grep -q SHADOW-CONFIG-HERE passwd.1.xml; then \ sed -e 's/^/%config;/' passwd.1.xml > passwd.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' passwd.1.xml > passwd.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl passwd.1.xml-config Note: Writing man1/passwd.1 xml2po --expand-all-entities -l sv -p ../po/sv.po -o passwd.5.xml ../passwd.5.xml sed -i 's:\(^:\1 lang="sv">:' passwd.5.xml if grep -q SHADOW-CONFIG-HERE passwd.5.xml; then \ sed -e 's/^/%config;/' passwd.5.xml > passwd.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' passwd.5.xml > passwd.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl passwd.5.xml-config Note: Writing man5/passwd.5 xml2po --expand-all-entities -l sv -p ../po/sv.po -o pwck.8.xml ../pwck.8.xml sed -i 's:\(^:\1 lang="sv">:' pwck.8.xml if grep -q SHADOW-CONFIG-HERE pwck.8.xml; then \ sed -e 's/^/%config;/' pwck.8.xml > pwck.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' pwck.8.xml > pwck.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl pwck.8.xml-config Note: Writing man8/pwck.8 xml2po --expand-all-entities -l sv -p ../po/sv.po -o sg.1.xml ../sg.1.xml sed -i 's:\(^:\1 lang="sv">:' sg.1.xml if grep -q SHADOW-CONFIG-HERE sg.1.xml; then \ sed -e 's/^/%config;/' sg.1.xml > sg.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' sg.1.xml > sg.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl sg.1.xml-config Note: Writing man1/sg.1 xml2po --expand-all-entities -l sv -p ../po/sv.po -o suauth.5.xml ../suauth.5.xml sed -i 's:\(^:\1 lang="sv">:' suauth.5.xml if grep -q SHADOW-CONFIG-HERE suauth.5.xml; then \ sed -e 's/^/%config;/' suauth.5.xml > suauth.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' suauth.5.xml > suauth.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl suauth.5.xml-config Note: Writing man5/suauth.5 xml2po --expand-all-entities -l sv -p ../po/sv.po -o userdel.8.xml ../userdel.8.xml sed -i 's:\(^:\1 lang="sv">:' userdel.8.xml if grep -q SHADOW-CONFIG-HERE userdel.8.xml; then \ sed -e 's/^/%config;/' userdel.8.xml > userdel.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' userdel.8.xml > userdel.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl userdel.8.xml-config Note: Writing man8/userdel.8 xml2po --expand-all-entities -l sv -p ../po/sv.po -o vipw.8.xml ../vipw.8.xml sed -i 's:\(^:\1 lang="sv">:' vipw.8.xml if grep -q SHADOW-CONFIG-HERE vipw.8.xml; then \ sed -e 's/^/%config;/' vipw.8.xml > vipw.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' vipw.8.xml > vipw.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl vipw.8.xml-config Note: Writing man8/vipw.8 Note: Writing man8/vigr.8 (soelim stub) rm chsh.1.xml pwck.8.xml faillog.8.xml sg.1.xml grpck.8.xml-config logoutd.8.xml lastlog.8.xml-config vipw.8.xml passwd.1.xml-config passwd.5.xml groupmod.8.xml-config gshadow.5.xml lastlog.8.xml userdel.8.xml-config shadow.3.xml groupdel.8.xml-config chage.1.xml-config groupmems.8.xml chsh.1.xml-config pwck.8.xml-config groupadd.8.xml sg.1.xml-config logoutd.8.xml-config expiry.1.xml-config expiry.1.xml nologin.8.xml userdel.8.xml grpck.8.xml passwd.5.xml-config gshadow.5.xml-config groupdel.8.xml groups.1.xml newgrp.1.xml faillog.5.xml shadow.3.xml-config groupmems.8.xml-config vipw.8.xml-config suauth.5.xml groupadd.8.xml-config passwd.1.xml groupmod.8.xml nologin.8.xml-config groups.1.xml-config newgrp.1.xml-config faillog.8.xml-config suauth.5.xml-config faillog.5.xml-config chage.1.xml make[4]: Leaving directory '/build/shadow-4.5/man/sv' Making all in tr make[4]: Entering directory '/build/shadow-4.5/man/tr' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/shadow-4.5/man/tr' Making all in zh_CN make[4]: Entering directory '/build/shadow-4.5/man/zh_CN' /usr/bin/make -C .. config.xml make[5]: Entering directory '/build/shadow-4.5/man' make[5]: 'config.xml' is up to date. make[5]: Leaving directory '/build/shadow-4.5/man' cp ../config.xml config.xml xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o chage.1.xml ../chage.1.xml sed -i 's:\(^:\1 lang="zh_CN">:' chage.1.xml if grep -q SHADOW-CONFIG-HERE chage.1.xml; then \ sed -e 's/^/%config;/' chage.1.xml > chage.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chage.1.xml > chage.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chage.1.xml-config Note: Writing man1/chage.1 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o chfn.1.xml ../chfn.1.xml sed -i 's:\(^:\1 lang="zh_CN">:' chfn.1.xml if grep -q SHADOW-CONFIG-HERE chfn.1.xml; then \ sed -e 's/^/%config;/' chfn.1.xml > chfn.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chfn.1.xml > chfn.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chfn.1.xml-config Note: Writing man1/chfn.1 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o chgpasswd.8.xml ../chgpasswd.8.xml sed -i 's:\(^:\1 lang="zh_CN">:' chgpasswd.8.xml if grep -q SHADOW-CONFIG-HERE chgpasswd.8.xml; then \ sed -e 's/^/%config;/' chgpasswd.8.xml > chgpasswd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chgpasswd.8.xml > chgpasswd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chgpasswd.8.xml-config Note: Writing man8/chgpasswd.8 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o chpasswd.8.xml ../chpasswd.8.xml sed -i 's:\(^:\1 lang="zh_CN">:' chpasswd.8.xml if grep -q SHADOW-CONFIG-HERE chpasswd.8.xml; then \ sed -e 's/^/%config;/' chpasswd.8.xml > chpasswd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chpasswd.8.xml > chpasswd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chpasswd.8.xml-config Note: Writing man8/chpasswd.8 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o chsh.1.xml ../chsh.1.xml sed -i 's:\(^:\1 lang="zh_CN">:' chsh.1.xml if grep -q SHADOW-CONFIG-HERE chsh.1.xml; then \ sed -e 's/^/%config;/' chsh.1.xml > chsh.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chsh.1.xml > chsh.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chsh.1.xml-config Note: Writing man1/chsh.1 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o expiry.1.xml ../expiry.1.xml sed -i 's:\(^:\1 lang="zh_CN">:' expiry.1.xml if grep -q SHADOW-CONFIG-HERE expiry.1.xml; then \ sed -e 's/^/%config;/' expiry.1.xml > expiry.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' expiry.1.xml > expiry.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl expiry.1.xml-config Note: Writing man1/expiry.1 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o faillog.5.xml ../faillog.5.xml sed -i 's:\(^:\1 lang="zh_CN">:' faillog.5.xml if grep -q SHADOW-CONFIG-HERE faillog.5.xml; then \ sed -e 's/^/%config;/' faillog.5.xml > faillog.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' faillog.5.xml > faillog.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl faillog.5.xml-config Note: Writing man5/faillog.5 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o faillog.8.xml ../faillog.8.xml sed -i 's:\(^:\1 lang="zh_CN">:' faillog.8.xml if grep -q SHADOW-CONFIG-HERE faillog.8.xml; then \ sed -e 's/^/%config;/' faillog.8.xml > faillog.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' faillog.8.xml > faillog.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl faillog.8.xml-config Note: Writing man8/faillog.8 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o shadow.3.xml ../shadow.3.xml sed -i 's:\(^:\1 lang="zh_CN">:' shadow.3.xml if grep -q SHADOW-CONFIG-HERE shadow.3.xml; then \ sed -e 's/^/%config;/' shadow.3.xml > shadow.3.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' shadow.3.xml > shadow.3.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl shadow.3.xml-config Note: Writing man3/shadow.3 Note: Writing man3/getspnam.3 (soelim stub) xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o gpasswd.1.xml ../gpasswd.1.xml sed -i 's:\(^:\1 lang="zh_CN">:' gpasswd.1.xml if grep -q SHADOW-CONFIG-HERE gpasswd.1.xml; then \ sed -e 's/^/%config;/' gpasswd.1.xml > gpasswd.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' gpasswd.1.xml > gpasswd.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl gpasswd.1.xml-config Note: Writing man1/gpasswd.1 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o groupadd.8.xml ../groupadd.8.xml sed -i 's:\(^:\1 lang="zh_CN">:' groupadd.8.xml if grep -q SHADOW-CONFIG-HERE groupadd.8.xml; then \ sed -e 's/^/%config;/' groupadd.8.xml > groupadd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupadd.8.xml > groupadd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupadd.8.xml-config Note: Writing man8/groupadd.8 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o groupdel.8.xml ../groupdel.8.xml sed -i 's:\(^:\1 lang="zh_CN">:' groupdel.8.xml if grep -q SHADOW-CONFIG-HERE groupdel.8.xml; then \ sed -e 's/^/%config;/' groupdel.8.xml > groupdel.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupdel.8.xml > groupdel.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupdel.8.xml-config Note: Writing man8/groupdel.8 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o groupmems.8.xml ../groupmems.8.xml sed -i 's:\(^:\1 lang="zh_CN">:' groupmems.8.xml if grep -q SHADOW-CONFIG-HERE groupmems.8.xml; then \ sed -e 's/^/%config;/' groupmems.8.xml > groupmems.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupmems.8.xml > groupmems.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupmems.8.xml-config Note: Writing man8/groupmems.8 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o groupmod.8.xml ../groupmod.8.xml sed -i 's:\(^:\1 lang="zh_CN">:' groupmod.8.xml if grep -q SHADOW-CONFIG-HERE groupmod.8.xml; then \ sed -e 's/^/%config;/' groupmod.8.xml > groupmod.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupmod.8.xml > groupmod.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupmod.8.xml-config Note: Writing man8/groupmod.8 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o groups.1.xml ../groups.1.xml sed -i 's:\(^:\1 lang="zh_CN">:' groups.1.xml if grep -q SHADOW-CONFIG-HERE groups.1.xml; then \ sed -e 's/^/%config;/' groups.1.xml > groups.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groups.1.xml > groups.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groups.1.xml-config Note: Writing man1/groups.1 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o grpck.8.xml ../grpck.8.xml sed -i 's:\(^:\1 lang="zh_CN">:' grpck.8.xml if grep -q SHADOW-CONFIG-HERE grpck.8.xml; then \ sed -e 's/^/%config;/' grpck.8.xml > grpck.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' grpck.8.xml > grpck.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl grpck.8.xml-config Note: Writing man8/grpck.8 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o pwconv.8.xml ../pwconv.8.xml sed -i 's:\(^:\1 lang="zh_CN">:' pwconv.8.xml if grep -q SHADOW-CONFIG-HERE pwconv.8.xml; then \ sed -e 's/^/%config;/' pwconv.8.xml > pwconv.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' pwconv.8.xml > pwconv.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl pwconv.8.xml-config Note: Writing man8/pwconv.8 Note: Writing man8/pwunconv.8 (soelim stub) Note: Writing man8/grpconv.8 (soelim stub) Note: Writing man8/grpunconv.8 (soelim stub) xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o gshadow.5.xml ../gshadow.5.xml sed -i 's:\(^:\1 lang="zh_CN">:' gshadow.5.xml if grep -q SHADOW-CONFIG-HERE gshadow.5.xml; then \ sed -e 's/^/%config;/' gshadow.5.xml > gshadow.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' gshadow.5.xml > gshadow.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl gshadow.5.xml-config Note: Writing man5/gshadow.5 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o lastlog.8.xml ../lastlog.8.xml sed -i 's:\(^:\1 lang="zh_CN">:' lastlog.8.xml if grep -q SHADOW-CONFIG-HERE lastlog.8.xml; then \ sed -e 's/^/%config;/' lastlog.8.xml > lastlog.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' lastlog.8.xml > lastlog.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl lastlog.8.xml-config Note: Writing man8/lastlog.8 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o login.1.xml ../login.1.xml sed -i 's:\(^:\1 lang="zh_CN">:' login.1.xml if grep -q SHADOW-CONFIG-HERE login.1.xml; then \ sed -e 's/^/%config;/' login.1.xml > login.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' login.1.xml > login.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl login.1.xml-config Note: Writing man1/login.1 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o login.defs.5.xml ../login.defs.5.xml sed -i 's:\(^:\1 lang="zh_CN">:' login.defs.5.xml if grep -q SHADOW-CONFIG-HERE login.defs.5.xml; then \ sed -e 's/^/%config;/' login.defs.5.xml > login.defs.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' login.defs.5.xml > login.defs.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl login.defs.5.xml-config Note: Writing man5/login.defs.5 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o logoutd.8.xml ../logoutd.8.xml sed -i 's:\(^:\1 lang="zh_CN">:' logoutd.8.xml if grep -q SHADOW-CONFIG-HERE logoutd.8.xml; then \ sed -e 's/^/%config;/' logoutd.8.xml > logoutd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' logoutd.8.xml > logoutd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl logoutd.8.xml-config Note: Writing man8/logoutd.8 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o newgrp.1.xml ../newgrp.1.xml sed -i 's:\(^:\1 lang="zh_CN">:' newgrp.1.xml if grep -q SHADOW-CONFIG-HERE newgrp.1.xml; then \ sed -e 's/^/%config;/' newgrp.1.xml > newgrp.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' newgrp.1.xml > newgrp.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl newgrp.1.xml-config Note: Writing man1/newgrp.1 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o newusers.8.xml ../newusers.8.xml sed -i 's:\(^:\1 lang="zh_CN">:' newusers.8.xml if grep -q SHADOW-CONFIG-HERE newusers.8.xml; then \ sed -e 's/^/%config;/' newusers.8.xml > newusers.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' newusers.8.xml > newusers.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl newusers.8.xml-config Note: Writing man8/newusers.8 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o nologin.8.xml ../nologin.8.xml sed -i 's:\(^:\1 lang="zh_CN">:' nologin.8.xml if grep -q SHADOW-CONFIG-HERE nologin.8.xml; then \ sed -e 's/^/%config;/' nologin.8.xml > nologin.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' nologin.8.xml > nologin.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl nologin.8.xml-config Note: Writing man8/nologin.8 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o passwd.1.xml ../passwd.1.xml sed -i 's:\(^:\1 lang="zh_CN">:' passwd.1.xml if grep -q SHADOW-CONFIG-HERE passwd.1.xml; then \ sed -e 's/^/%config;/' passwd.1.xml > passwd.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' passwd.1.xml > passwd.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl passwd.1.xml-config Note: Writing man1/passwd.1 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o passwd.5.xml ../passwd.5.xml sed -i 's:\(^:\1 lang="zh_CN">:' passwd.5.xml if grep -q SHADOW-CONFIG-HERE passwd.5.xml; then \ sed -e 's/^/%config;/' passwd.5.xml > passwd.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' passwd.5.xml > passwd.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl passwd.5.xml-config Note: Writing man5/passwd.5 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o pwck.8.xml ../pwck.8.xml sed -i 's:\(^:\1 lang="zh_CN">:' pwck.8.xml if grep -q SHADOW-CONFIG-HERE pwck.8.xml; then \ sed -e 's/^/%config;/' pwck.8.xml > pwck.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' pwck.8.xml > pwck.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl pwck.8.xml-config Note: Writing man8/pwck.8 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o sg.1.xml ../sg.1.xml sed -i 's:\(^:\1 lang="zh_CN">:' sg.1.xml if grep -q SHADOW-CONFIG-HERE sg.1.xml; then \ sed -e 's/^/%config;/' sg.1.xml > sg.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' sg.1.xml > sg.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl sg.1.xml-config Note: Writing man1/sg.1 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o shadow.5.xml ../shadow.5.xml sed -i 's:\(^:\1 lang="zh_CN">:' shadow.5.xml if grep -q SHADOW-CONFIG-HERE shadow.5.xml; then \ sed -e 's/^/%config;/' shadow.5.xml > shadow.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' shadow.5.xml > shadow.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl shadow.5.xml-config Note: Writing man5/shadow.5 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o su.1.xml ../su.1.xml sed -i 's:\(^:\1 lang="zh_CN">:' su.1.xml if grep -q SHADOW-CONFIG-HERE su.1.xml; then \ sed -e 's/^/%config;/' su.1.xml > su.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' su.1.xml > su.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl su.1.xml-config Note: Writing man1/su.1 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o suauth.5.xml ../suauth.5.xml sed -i 's:\(^:\1 lang="zh_CN">:' suauth.5.xml if grep -q SHADOW-CONFIG-HERE suauth.5.xml; then \ sed -e 's/^/%config;/' suauth.5.xml > suauth.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' suauth.5.xml > suauth.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl suauth.5.xml-config Note: Writing man5/suauth.5 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o useradd.8.xml ../useradd.8.xml sed -i 's:\(^:\1 lang="zh_CN">:' useradd.8.xml if grep -q SHADOW-CONFIG-HERE useradd.8.xml; then \ sed -e 's/^/%config;/' useradd.8.xml > useradd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' useradd.8.xml > useradd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl useradd.8.xml-config Note: Writing man8/useradd.8 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o userdel.8.xml ../userdel.8.xml sed -i 's:\(^:\1 lang="zh_CN">:' userdel.8.xml if grep -q SHADOW-CONFIG-HERE userdel.8.xml; then \ sed -e 's/^/%config;/' userdel.8.xml > userdel.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' userdel.8.xml > userdel.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl userdel.8.xml-config Note: Writing man8/userdel.8 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o usermod.8.xml ../usermod.8.xml sed -i 's:\(^:\1 lang="zh_CN">:' usermod.8.xml if grep -q SHADOW-CONFIG-HERE usermod.8.xml; then \ sed -e 's/^/%config;/' usermod.8.xml > usermod.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' usermod.8.xml > usermod.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl usermod.8.xml-config Note: Writing man8/usermod.8 xml2po --expand-all-entities -l zh_CN -p ../po/zh_CN.po -o vipw.8.xml ../vipw.8.xml sed -i 's:\(^:\1 lang="zh_CN">:' vipw.8.xml if grep -q SHADOW-CONFIG-HERE vipw.8.xml; then \ sed -e 's/^/%config;/' vipw.8.xml > vipw.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' vipw.8.xml > vipw.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl vipw.8.xml-config Note: Writing man8/vipw.8 Note: Writing man8/vigr.8 (soelim stub) rm chsh.1.xml pwck.8.xml faillog.8.xml chgpasswd.8.xml chpasswd.8.xml login.1.xml grpck.8.xml-config usermod.8.xml-config logoutd.8.xml lastlog.8.xml-config vipw.8.xml groupdel.8.xml-config passwd.1.xml-config gpasswd.1.xml-config newusers.8.xml-config groupmod.8.xml-config gshadow.5.xml sg.1.xml-config pwconv.8.xml-config lastlog.8.xml chfn.1.xml-config passwd.5.xml userdel.8.xml-config shadow.3.xml chage.1.xml-config groupmems.8.xml chsh.1.xml-config login.defs.5.xml pwck.8.xml-config shadow.5.xml groupadd.8.xml chgpasswd.8.xml-config chpasswd.8.xml-config login.1.xml-config su.1.xml-config logoutd.8.xml-config expiry.1.xml-config login.defs.5.xml-config expiry.1.xml nologin.8.xml userdel.8.xml useradd.8.xml-config grpck.8.xml passwd.5.xml-config gshadow.5.xml-config groupdel.8.xml groups.1.xml newgrp.1.xml newusers.8.xml su.1.xml faillog.5.xml sg.1.xml shadow.3.xml-config groupmems.8.xml-config nologin.8.xml-config vipw.8.xml-config suauth.5.xml shadow.5.xml-config groupadd.8.xml-config usermod.8.xml passwd.1.xml groupmod.8.xml groups.1.xml-config gpasswd.1.xml pwconv.8.xml useradd.8.xml newgrp.1.xml-config faillog.8.xml-config chfn.1.xml suauth.5.xml-config faillog.5.xml-config chage.1.xml make[4]: Leaving directory '/build/shadow-4.5/man/zh_CN' Making all in zh_TW make[4]: Entering directory '/build/shadow-4.5/man/zh_TW' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/shadow-4.5/man/zh_TW' make[4]: Entering directory '/build/shadow-4.5/man' if grep -q SHADOW-CONFIG-HERE chage.1.xml; then \ sed -e 's/^/%config;/' chage.1.xml > chage.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chage.1.xml > chage.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chage.1.xml-config Note: Writing man1/chage.1 if grep -q SHADOW-CONFIG-HERE chfn.1.xml; then \ sed -e 's/^/%config;/' chfn.1.xml > chfn.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chfn.1.xml > chfn.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chfn.1.xml-config Note: Writing man1/chfn.1 if grep -q SHADOW-CONFIG-HERE chgpasswd.8.xml; then \ sed -e 's/^/%config;/' chgpasswd.8.xml > chgpasswd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chgpasswd.8.xml > chgpasswd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chgpasswd.8.xml-config Note: Writing man8/chgpasswd.8 if grep -q SHADOW-CONFIG-HERE chpasswd.8.xml; then \ sed -e 's/^/%config;/' chpasswd.8.xml > chpasswd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chpasswd.8.xml > chpasswd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chpasswd.8.xml-config Note: Writing man8/chpasswd.8 if grep -q SHADOW-CONFIG-HERE chsh.1.xml; then \ sed -e 's/^/%config;/' chsh.1.xml > chsh.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' chsh.1.xml > chsh.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl chsh.1.xml-config Note: Writing man1/chsh.1 if grep -q SHADOW-CONFIG-HERE expiry.1.xml; then \ sed -e 's/^/%config;/' expiry.1.xml > expiry.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' expiry.1.xml > expiry.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl expiry.1.xml-config Note: Writing man1/expiry.1 if grep -q SHADOW-CONFIG-HERE faillog.5.xml; then \ sed -e 's/^/%config;/' faillog.5.xml > faillog.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' faillog.5.xml > faillog.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl faillog.5.xml-config Note: Writing man5/faillog.5 if grep -q SHADOW-CONFIG-HERE faillog.8.xml; then \ sed -e 's/^/%config;/' faillog.8.xml > faillog.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' faillog.8.xml > faillog.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl faillog.8.xml-config Note: Writing man8/faillog.8 if grep -q SHADOW-CONFIG-HERE shadow.3.xml; then \ sed -e 's/^/%config;/' shadow.3.xml > shadow.3.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' shadow.3.xml > shadow.3.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl shadow.3.xml-config Note: Writing man3/shadow.3 Note: Writing man3/getspnam.3 (soelim stub) if grep -q SHADOW-CONFIG-HERE gpasswd.1.xml; then \ sed -e 's/^/%config;/' gpasswd.1.xml > gpasswd.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' gpasswd.1.xml > gpasswd.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl gpasswd.1.xml-config Note: Writing man1/gpasswd.1 if grep -q SHADOW-CONFIG-HERE groupadd.8.xml; then \ sed -e 's/^/%config;/' groupadd.8.xml > groupadd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupadd.8.xml > groupadd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupadd.8.xml-config Note: Writing man8/groupadd.8 if grep -q SHADOW-CONFIG-HERE groupdel.8.xml; then \ sed -e 's/^/%config;/' groupdel.8.xml > groupdel.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupdel.8.xml > groupdel.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupdel.8.xml-config Note: Writing man8/groupdel.8 if grep -q SHADOW-CONFIG-HERE groupmems.8.xml; then \ sed -e 's/^/%config;/' groupmems.8.xml > groupmems.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupmems.8.xml > groupmems.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupmems.8.xml-config Note: Writing man8/groupmems.8 if grep -q SHADOW-CONFIG-HERE groupmod.8.xml; then \ sed -e 's/^/%config;/' groupmod.8.xml > groupmod.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groupmod.8.xml > groupmod.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groupmod.8.xml-config Note: Writing man8/groupmod.8 if grep -q SHADOW-CONFIG-HERE groups.1.xml; then \ sed -e 's/^/%config;/' groups.1.xml > groups.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' groups.1.xml > groups.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl groups.1.xml-config Note: Writing man1/groups.1 if grep -q SHADOW-CONFIG-HERE grpck.8.xml; then \ sed -e 's/^/%config;/' grpck.8.xml > grpck.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' grpck.8.xml > grpck.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl grpck.8.xml-config Note: Writing man8/grpck.8 if grep -q SHADOW-CONFIG-HERE pwconv.8.xml; then \ sed -e 's/^/%config;/' pwconv.8.xml > pwconv.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' pwconv.8.xml > pwconv.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl pwconv.8.xml-config Note: Writing man8/pwconv.8 Note: Writing man8/pwunconv.8 (soelim stub) Note: Writing man8/grpconv.8 (soelim stub) Note: Writing man8/grpunconv.8 (soelim stub) if grep -q SHADOW-CONFIG-HERE gshadow.5.xml; then \ sed -e 's/^/%config;/' gshadow.5.xml > gshadow.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' gshadow.5.xml > gshadow.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl gshadow.5.xml-config Note: Writing man5/gshadow.5 if grep -q SHADOW-CONFIG-HERE lastlog.8.xml; then \ sed -e 's/^/%config;/' lastlog.8.xml > lastlog.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' lastlog.8.xml > lastlog.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl lastlog.8.xml-config Note: Writing man8/lastlog.8 if grep -q SHADOW-CONFIG-HERE login.1.xml; then \ sed -e 's/^/%config;/' login.1.xml > login.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' login.1.xml > login.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl login.1.xml-config Note: Writing man1/login.1 if grep -q SHADOW-CONFIG-HERE login.defs.5.xml; then \ sed -e 's/^/%config;/' login.defs.5.xml > login.defs.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' login.defs.5.xml > login.defs.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl login.defs.5.xml-config Note: Writing man5/login.defs.5 if grep -q SHADOW-CONFIG-HERE logoutd.8.xml; then \ sed -e 's/^/%config;/' logoutd.8.xml > logoutd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' logoutd.8.xml > logoutd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl logoutd.8.xml-config Note: Writing man8/logoutd.8 if grep -q SHADOW-CONFIG-HERE newgrp.1.xml; then \ sed -e 's/^/%config;/' newgrp.1.xml > newgrp.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' newgrp.1.xml > newgrp.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl newgrp.1.xml-config Note: Writing man1/newgrp.1 if grep -q SHADOW-CONFIG-HERE newusers.8.xml; then \ sed -e 's/^/%config;/' newusers.8.xml > newusers.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' newusers.8.xml > newusers.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl newusers.8.xml-config Note: Writing man8/newusers.8 if grep -q SHADOW-CONFIG-HERE nologin.8.xml; then \ sed -e 's/^/%config;/' nologin.8.xml > nologin.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' nologin.8.xml > nologin.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl nologin.8.xml-config Note: Writing man8/nologin.8 if grep -q SHADOW-CONFIG-HERE passwd.1.xml; then \ sed -e 's/^/%config;/' passwd.1.xml > passwd.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' passwd.1.xml > passwd.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl passwd.1.xml-config Note: Writing man1/passwd.1 if grep -q SHADOW-CONFIG-HERE passwd.5.xml; then \ sed -e 's/^/%config;/' passwd.5.xml > passwd.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' passwd.5.xml > passwd.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl passwd.5.xml-config Note: Writing man5/passwd.5 if grep -q SHADOW-CONFIG-HERE pwck.8.xml; then \ sed -e 's/^/%config;/' pwck.8.xml > pwck.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' pwck.8.xml > pwck.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl pwck.8.xml-config Note: Writing man8/pwck.8 if grep -q SHADOW-CONFIG-HERE sg.1.xml; then \ sed -e 's/^/%config;/' sg.1.xml > sg.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' sg.1.xml > sg.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl sg.1.xml-config Note: Writing man1/sg.1 if grep -q SHADOW-CONFIG-HERE shadow.5.xml; then \ sed -e 's/^/%config;/' shadow.5.xml > shadow.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' shadow.5.xml > shadow.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl shadow.5.xml-config Note: Writing man5/shadow.5 if grep -q SHADOW-CONFIG-HERE su.1.xml; then \ sed -e 's/^/%config;/' su.1.xml > su.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' su.1.xml > su.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl su.1.xml-config Note: Writing man1/su.1 if grep -q SHADOW-CONFIG-HERE suauth.5.xml; then \ sed -e 's/^/%config;/' suauth.5.xml > suauth.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' suauth.5.xml > suauth.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl suauth.5.xml-config Note: Writing man5/suauth.5 if grep -q SHADOW-CONFIG-HERE useradd.8.xml; then \ sed -e 's/^/%config;/' useradd.8.xml > useradd.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' useradd.8.xml > useradd.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl useradd.8.xml-config Note: Writing man8/useradd.8 if grep -q SHADOW-CONFIG-HERE userdel.8.xml; then \ sed -e 's/^/%config;/' userdel.8.xml > userdel.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' userdel.8.xml > userdel.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl userdel.8.xml-config Note: Writing man8/userdel.8 if grep -q SHADOW-CONFIG-HERE usermod.8.xml; then \ sed -e 's/^/%config;/' usermod.8.xml > usermod.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' usermod.8.xml > usermod.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl usermod.8.xml-config Note: Writing man8/usermod.8 if grep -q SHADOW-CONFIG-HERE vipw.8.xml; then \ sed -e 's/^/%config;/' vipw.8.xml > vipw.8.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' vipw.8.xml > vipw.8.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl vipw.8.xml-config Note: Writing man8/vipw.8 Note: Writing man8/vigr.8 (soelim stub) if grep -q SHADOW-CONFIG-HERE newgidmap.1.xml; then \ sed -e 's/^/%config;/' newgidmap.1.xml > newgidmap.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' newgidmap.1.xml > newgidmap.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl newgidmap.1.xml-config Warn: meta author : no refentry/info/author newgidmap Note: meta author : see http://docbook.sf.net/el/author newgidmap Warn: meta author : no author data, so inserted a fixme newgidmap Note: Writing man1/newgidmap.1 if grep -q SHADOW-CONFIG-HERE newuidmap.1.xml; then \ sed -e 's/^/%config;/' newuidmap.1.xml > newuidmap.1.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' newuidmap.1.xml > newuidmap.1.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl newuidmap.1.xml-config Warn: meta author : no refentry/info/author newuidmap Note: meta author : see http://docbook.sf.net/el/author newuidmap Warn: meta author : no author data, so inserted a fixme newuidmap Note: Writing man1/newuidmap.1 if grep -q SHADOW-CONFIG-HERE subgid.5.xml; then \ sed -e 's/^/%config;/' subgid.5.xml > subgid.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' subgid.5.xml > subgid.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl subgid.5.xml-config Warn: meta author : no refentry/info/author subgid Note: meta author : see http://docbook.sf.net/el/author subgid Warn: meta author : no author data, so inserted a fixme subgid Note: Writing man5/subgid.5 if grep -q SHADOW-CONFIG-HERE subuid.5.xml; then \ sed -e 's/^/%config;/' subuid.5.xml > subuid.5.xml-config; \ else \ sed -e 's/^\(/\1 [%config;]>/' subuid.5.xml > subuid.5.xml-config; \ fi /usr/bin/xsltproc --stringparam profile.condition "pam;gshadow;no_tcb;sha_crypt;subids" \ --param "man.authors.section.enabled" "0" \ --stringparam "man.output.base.dir" "" \ --param "man.output.in.separate.dir" "1" \ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/profile-docbook.xsl subuid.5.xml-config Warn: meta author : no refentry/info/author subuid Note: meta author : see http://docbook.sf.net/el/author subuid Warn: meta author : no author data, so inserted a fixme subuid Note: Writing man5/subuid.5 rm usermod.8.xml-config lastlog.8.xml-config passwd.1.xml-config newusers.8.xml-config sg.1.xml-config newgidmap.1.xml-config pwconv.8.xml-config chfn.1.xml-config userdel.8.xml-config groupdel.8.xml-config useradd.8.xml-config chage.1.xml-config newuidmap.1.xml-config pwck.8.xml-config chgpasswd.8.xml-config chpasswd.8.xml-config login.1.xml-config su.1.xml-config logoutd.8.xml-config expiry.1.xml-config login.defs.5.xml-config newgrp.1.xml-config passwd.5.xml-config gshadow.5.xml-config vipw.8.xml-config gpasswd.1.xml-config subuid.5.xml-config shadow.3.xml-config groupmems.8.xml-config nologin.8.xml-config shadow.5.xml-config groupadd.8.xml-config subgid.5.xml-config grpck.8.xml-config chsh.1.xml-config groupmod.8.xml-config groups.1.xml-config faillog.8.xml-config suauth.5.xml-config faillog.5.xml-config make[4]: Leaving directory '/build/shadow-4.5/man' make[3]: Leaving directory '/build/shadow-4.5/man' Making all in libmisc make[3]: Entering directory '/build/shadow-4.5/libmisc' gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o addgrps.o addgrps.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o age.o age.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o audit_help.o audit_help.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o basename.o basename.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o chkname.o chkname.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o chowndir.o chowndir.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o chowntty.o chowntty.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o cleanup.o cleanup.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o cleanup_group.o cleanup_group.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o cleanup_user.o cleanup_user.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o console.o console.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o copydir.o copydir.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o entry.o entry.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o env.o env.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o failure.o failure.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o find_new_gid.o find_new_gid.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o find_new_uid.o find_new_uid.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o find_new_sub_gids.o find_new_sub_gids.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o find_new_sub_uids.o find_new_sub_uids.c test -f getdate.c || /bin/sh ../ylwrap getdate.y y.tab.c getdate.c y.tab.h `echo getdate.c | sed -e s/cc$/hh/ -e s/cpp$/hpp/ -e s/cxx$/hxx/ -e s/c++$/h++/ -e s/c$/h/` y.output getdate.output -- bison -y /build/shadow-4.5/libmisc/getdate.y: warning: 13 shift/reduce conflicts [-Wconflicts-sr] gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o getdate.o getdate.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o getgr_nam_gid.o getgr_nam_gid.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o getrange.o getrange.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o gettime.o gettime.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o hushed.o hushed.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o idmapping.o idmapping.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o isexpired.o isexpired.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o limits.o limits.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o list.o list.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o log.o log.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o loginprompt.o loginprompt.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o mail.o mail.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o motd.o motd.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o myname.o myname.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o obscure.o obscure.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o pam_pass.o pam_pass.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o pam_pass_non_interractive.o pam_pass_non_interractive.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o pwd2spwd.o pwd2spwd.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o pwdcheck.o pwdcheck.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o pwd_init.o pwd_init.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o remove_tree.o remove_tree.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o rlogin.o rlogin.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o root_flag.o root_flag.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o salt.o salt.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o setugid.o setugid.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o setupenv.o setupenv.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o shell.o shell.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o strtoday.o strtoday.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o sub.o sub.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o sulog.o sulog.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o ttytype.o ttytype.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o tz.o tz.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o ulimit.o ulimit.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o user_busy.o user_busy.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o utmp.o utmp.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o valid.o valid.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o xgetpwnam.o xgetpwnam.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o xgetpwuid.o xgetpwuid.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o xgetgrnam.o xgetgrnam.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o xgetgrgid.o xgetgrgid.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o xgetspnam.o xgetspnam.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o xmalloc.o xmalloc.c gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o yesno.o yesno.c rm -f libmisc.a ar cru libmisc.a addgrps.o age.o audit_help.o basename.o chkname.o chowndir.o chowntty.o cleanup.o cleanup_group.o cleanup_user.o console.o copydir.o entry.o env.o failure.o find_new_gid.o find_new_uid.o find_new_sub_gids.o find_new_sub_uids.o getdate.o getgr_nam_gid.o getrange.o gettime.o hushed.o idmapping.o isexpired.o limits.o list.o log.o loginprompt.o mail.o motd.o myname.o obscure.o pam_pass.o pam_pass_non_interractive.o pwd2spwd.o pwdcheck.o pwd_init.o remove_tree.o rlogin.o root_flag.o salt.o setugid.o setupenv.o shell.o strtoday.o sub.o sulog.o ttytype.o tz.o ulimit.o user_busy.o utmp.o valid.o xgetpwnam.o xgetpwuid.o xgetgrnam.o xgetgrgid.o xgetspnam.o xmalloc.o yesno.o ar: `u' modifier ignored since `D' is the default (see `U') ranlib libmisc.a make[3]: Leaving directory '/build/shadow-4.5/libmisc' Making all in lib make[3]: Entering directory '/build/shadow-4.5/lib' /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o commonio.lo commonio.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c commonio.c -o commonio.o commonio.c: In function 'commonio_close.part.6': commonio.c:942:34: warning: '__builtin___snprintf_chk' output may be truncated before the last format character [-Wformat-truncation=] snprintf (buf, sizeof buf, "%s-", db->filename); ^ In file included from /usr/include/stdio.h:873, from gshadow_.h:54, from defines.h:138, from commonio.c:37: /usr/include/i386-linux-gnu/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 2 and 1025 bytes into a destination of size 1024 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ commonio.c:986:33: warning: '__builtin___snprintf_chk' output may be truncated before the last format character [-Wformat-truncation=] snprintf (buf, sizeof buf, "%s+", db->filename); ^ In file included from /usr/include/stdio.h:873, from gshadow_.h:54, from defines.h:138, from commonio.c:37: /usr/include/i386-linux-gnu/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 2 and 1025 bytes into a destination of size 1024 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ commonio.c: In function 'commonio_lock_nowait': commonio.c:386:35: warning: '%lu' directive output may be truncated writing between 1 and 10 bytes into a region of size between 0 and 1023 [-Wformat-truncation=] snprintf (file, sizeof file, "%s.%lu", ^~~ commonio.c:386:31: note: using the range [0, 4294967295] for directive argument snprintf (file, sizeof file, "%s.%lu", ^~~~~~~~ In file included from /usr/include/stdio.h:873, from gshadow_.h:54, from defines.h:138, from commonio.c:37: /usr/include/i386-linux-gnu/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 3 and 1035 bytes into a destination of size 1024 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ commonio.c:388:34: warning: '.lock' directive output may be truncated writing 5 bytes into a region of size between 1 and 1024 [-Wformat-truncation=] snprintf (lock, sizeof lock, "%s.lock", db->filename); ^~~~~ In file included from /usr/include/stdio.h:873, from gshadow_.h:54, from defines.h:138, from commonio.c:37: /usr/include/i386-linux-gnu/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 6 and 1029 bytes into a destination of size 1024 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ commonio.c: In function 'commonio_unlock': commonio.c:498:35: warning: '.lock' directive output may be truncated writing 5 bytes into a region of size between 1 and 1024 [-Wformat-truncation=] snprintf (lock, sizeof lock, "%s.lock", db->filename); ^~~~~ In file included from /usr/include/stdio.h:873, from gshadow_.h:54, from defines.h:138, from commonio.c:37: /usr/include/i386-linux-gnu/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 6 and 1029 bytes into a destination of size 1024 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o encrypt.lo encrypt.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c encrypt.c -o encrypt.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o fields.lo fields.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c fields.c -o fields.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o fputsx.lo fputsx.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c fputsx.c -o fputsx.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o getdef.lo getdef.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c getdef.c -o getdef.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o get_gid.lo get_gid.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c get_gid.c -o get_gid.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o getlong.lo getlong.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c getlong.c -o getlong.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o get_pid.lo get_pid.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c get_pid.c -o get_pid.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o get_uid.lo get_uid.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c get_uid.c -o get_uid.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o getulong.lo getulong.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c getulong.c -o getulong.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o groupio.lo groupio.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c groupio.c -o groupio.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o groupmem.lo groupmem.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c groupmem.c -o groupmem.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o gshadow.lo gshadow.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c gshadow.c -o gshadow.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o lockpw.lo lockpw.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c lockpw.c -o lockpw.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o nscd.lo nscd.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c nscd.c -o nscd.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o port.lo port.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c port.c -o port.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o pwauth.lo pwauth.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c pwauth.c -o pwauth.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o pwio.lo pwio.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c pwio.c -o pwio.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o pwmem.lo pwmem.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c pwmem.c -o pwmem.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o subordinateio.lo subordinateio.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c subordinateio.c -o subordinateio.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o selinux.lo selinux.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c selinux.c -o selinux.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o semanage.lo semanage.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c semanage.c -o semanage.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o sgetgrent.lo sgetgrent.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c sgetgrent.c -o sgetgrent.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o sgetpwent.lo sgetpwent.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c sgetpwent.c -o sgetpwent.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o sgetspent.lo sgetspent.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c sgetspent.c -o sgetspent.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o sgroupio.lo sgroupio.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c sgroupio.c -o sgroupio.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o shadow.lo shadow.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c shadow.c -o shadow.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o shadowio.lo shadowio.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c shadowio.c -o shadowio.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o shadowmem.lo shadowmem.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c shadowmem.c -o shadowmem.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o spawn.lo spawn.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c spawn.c -o spawn.o /bin/sh ../libtool --tag=CC --mode=compile gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o utent.lo utent.c libtool: compile: gcc -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c utent.c -o utent.o /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -version-info 0:0:0 -Wl,-z,relro -Wl,-z,now -o libshadow.la commonio.lo encrypt.lo fields.lo fputsx.lo getdef.lo get_gid.lo getlong.lo get_pid.lo get_uid.lo getulong.lo groupio.lo groupmem.lo gshadow.lo lockpw.lo nscd.lo port.lo pwauth.lo pwio.lo pwmem.lo subordinateio.lo selinux.lo semanage.lo sgetgrent.lo sgetpwent.lo sgetspent.lo sgroupio.lo shadow.lo shadowio.lo shadowmem.lo spawn.lo utent.lo libtool: warning: '-version-info/-version-number' is ignored for convenience libraries libtool: link: ar cru .libs/libshadow.a commonio.o encrypt.o fields.o fputsx.o getdef.o get_gid.o getlong.o get_pid.o get_uid.o getulong.o groupio.o groupmem.o gshadow.o lockpw.o nscd.o port.o pwauth.o pwio.o pwmem.o subordinateio.o selinux.o semanage.o sgetgrent.o sgetpwent.o sgetspent.o sgroupio.o shadow.o shadowio.o shadowmem.o spawn.o utent.o ar: `u' modifier ignored since `D' is the default (see `U') libtool: link: ranlib .libs/libshadow.a libtool: link: ( cd ".libs" && rm -f "libshadow.la" && ln -s "../libshadow.la" "libshadow.la" ) make[3]: Leaving directory '/build/shadow-4.5/lib' Making all in src make[3]: Entering directory '/build/shadow-4.5/src' gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o groups.o groups.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o groups groups.o ../libmisc/libmisc.a ../lib/libshadow.la libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o groups groups.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o login.o login.c login.c: In function 'alarm_handler': login.c:419:2: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] write (STDERR_FILENO, tmsg, strlen (tmsg)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o login_nopam.o login_nopam.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o login login.o login_nopam.o ../libmisc/libmisc.a ../lib/libshadow.la -lpam -lpam_misc -laudit libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o login login.o login_nopam.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -lpam -lpam_misc -laudit gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o su.o su.c su.c: In function 'main': su.c:1208:12: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] argv[-1] = cp; ^ su.c: In function 'kill_child': su.c:186:10: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] (void) write (STDERR_FILENO, kill_msg, strlen (kill_msg)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ su.c:188:10: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] (void) write (STDERR_FILENO, wait_msg, strlen (wait_msg)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o suauth.o suauth.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o su su.o suauth.o ../libmisc/libmisc.a ../lib/libshadow.la -lpam -lpam_misc -laudit libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o su su.o suauth.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -lpam -lpam_misc -laudit gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o id.o id.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o id id.o ../libmisc/libmisc.a ../lib/libshadow.la libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o id id.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o sulogin.o sulogin.c sulogin.c: In function 'main': sulogin.c:123:4: warning: ignoring return value of 'dup', declared with attribute warn_unused_result [-Wunused-result] dup (0); ^~~~~~~ sulogin.c:124:4: warning: ignoring return value of 'dup', declared with attribute warn_unused_result [-Wunused-result] dup (0); ^~~~~~~ /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o sulogin sulogin.o ../libmisc/libmisc.a ../lib/libshadow.la -lcrypt libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o sulogin sulogin.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -lcrypt gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o faillog.o faillog.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o faillog faillog.o ../libmisc/libmisc.a ../lib/libshadow.la libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o faillog faillog.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o lastlog.o lastlog.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o lastlog lastlog.o ../libmisc/libmisc.a ../lib/libshadow.la -laudit libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o lastlog lastlog.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -laudit gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o chage.o chage.c In file included from chage.c:53: /usr/include/selinux/av_permissions.h:1:2: warning: #warning "Please remove any #include of this header in your source code." [-Wcpp] #warning "Please remove any #include of this header in your source code." ^~~~~~~ /usr/include/selinux/av_permissions.h:2:2: warning: #warning "Instead, use string_to_av_perm() to map the permission name to a value." [-Wcpp] #warning "Instead, use string_to_av_perm() to map the permission name to a value." ^~~~~~~ /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o chage chage.o ../libmisc/libmisc.a ../lib/libshadow.la -laudit -lselinux libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o chage chage.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -laudit -lselinux gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o chfn.o chfn.c In file included from chfn.c:45: /usr/include/selinux/av_permissions.h:1:2: warning: #warning "Please remove any #include of this header in your source code." [-Wcpp] #warning "Please remove any #include of this header in your source code." ^~~~~~~ /usr/include/selinux/av_permissions.h:2:2: warning: #warning "Instead, use string_to_av_perm() to map the permission name to a value." [-Wcpp] #warning "Instead, use string_to_av_perm() to map the permission name to a value." ^~~~~~~ chfn.c: In function 'main': chfn.c:739:45: warning: '%s' directive output may be truncated writing up to 8191 bytes into a region of size between 0 and 8191 [-Wformat-truncation=] snprintf (new_gecos, sizeof new_gecos, "%s,%s,%s,%s%s%s", ^~ fullnm, roomno, workph, homeph, ~~~~~~ In file included from /usr/include/stdio.h:873, from chfn.c:40: /usr/include/i386-linux-gnu/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 4 and 40960 bytes into a destination of size 8192 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o chfn chfn.o ../libmisc/libmisc.a ../lib/libshadow.la -lpam -lpam_misc -lselinux libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o chfn chfn.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -lpam -lpam_misc -lselinux gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o chsh.o chsh.c In file included from chsh.c:44: /usr/include/selinux/av_permissions.h:1:2: warning: #warning "Please remove any #include of this header in your source code." [-Wcpp] #warning "Please remove any #include of this header in your source code." ^~~~~~~ /usr/include/selinux/av_permissions.h:2:2: warning: #warning "Instead, use string_to_av_perm() to map the permission name to a value." [-Wcpp] #warning "Instead, use string_to_av_perm() to map the permission name to a value." ^~~~~~~ /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o chsh chsh.o ../libmisc/libmisc.a ../lib/libshadow.la -lpam -lpam_misc -lselinux libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o chsh chsh.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -lpam -lpam_misc -lselinux gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o expiry.o expiry.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o expiry expiry.o ../libmisc/libmisc.a ../lib/libshadow.la libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o expiry expiry.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o gpasswd.o gpasswd.c gpasswd.c: In function 'catch_signals': gpasswd.c:172:10: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] (void) write (STDOUT_FILENO, "\n", 1); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o gpasswd gpasswd.o ../libmisc/libmisc.a ../lib/libshadow.la -laudit -lselinux -lcrypt libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o gpasswd gpasswd.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -laudit -lselinux -lcrypt gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o newgrp.o newgrp.c newgrp.c: In function 'main': newgrp.c:784:5: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] cp = Basename ((char *) prog); ^ /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o newgrp newgrp.o ../libmisc/libmisc.a ../lib/libshadow.la -laudit -lcrypt libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o newgrp newgrp.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -laudit -lcrypt gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o passwd.o passwd.c In file included from passwd.c:46: /usr/include/selinux/flask.h:5:2: warning: #warning "Please remove any #include's of this header in your source code." [-Wcpp] #warning "Please remove any #include's of this header in your source code." ^~~~~~~ /usr/include/selinux/flask.h:6:2: warning: #warning "Instead, use string_to_security_class() to map the class name to a value." [-Wcpp] #warning "Instead, use string_to_security_class() to map the class name to a value." ^~~~~~~ In file included from passwd.c:47: /usr/include/selinux/av_permissions.h:1:2: warning: #warning "Please remove any #include of this header in your source code." [-Wcpp] #warning "Please remove any #include of this header in your source code." ^~~~~~~ /usr/include/selinux/av_permissions.h:2:2: warning: #warning "Instead, use string_to_av_perm() to map the permission name to a value." [-Wcpp] #warning "Instead, use string_to_av_perm() to map the permission name to a value." ^~~~~~~ /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o passwd passwd.o ../libmisc/libmisc.a ../lib/libshadow.la -lpam -lpam_misc -laudit -lselinux libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o passwd passwd.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -lpam -lpam_misc -laudit -lselinux gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o newgidmap.o newgidmap.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o newgidmap newgidmap.o ../libmisc/libmisc.a ../lib/libshadow.la -lselinux libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o newgidmap newgidmap.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -lselinux gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o newuidmap.o newuidmap.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o newuidmap newuidmap.o ../libmisc/libmisc.a ../lib/libshadow.la -lselinux libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o newuidmap newuidmap.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -lselinux gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o cppw.o cppw.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o cppw cppw.o ../libmisc/libmisc.a ../lib/libshadow.la -lselinux libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o cppw cppw.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -lselinux gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o chgpasswd.o chgpasswd.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o chgpasswd chgpasswd.o ../libmisc/libmisc.a ../lib/libshadow.la -lselinux -lcrypt libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o chgpasswd chgpasswd.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -lselinux -lcrypt gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o chpasswd.o chpasswd.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o chpasswd chpasswd.o ../libmisc/libmisc.a ../lib/libshadow.la -lpam -lpam_misc -lselinux -lcrypt libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o chpasswd chpasswd.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -lpam -lpam_misc -lselinux -lcrypt gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o groupadd.o groupadd.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o groupadd groupadd.o ../libmisc/libmisc.a ../lib/libshadow.la -laudit -lselinux libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o groupadd groupadd.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -laudit -lselinux gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o groupdel.o groupdel.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o groupdel groupdel.o ../libmisc/libmisc.a ../lib/libshadow.la -laudit -lselinux libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o groupdel groupdel.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -laudit -lselinux gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o groupmems.o groupmems.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o groupmems groupmems.o ../libmisc/libmisc.a ../lib/libshadow.la -lpam -lpam_misc -lselinux libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o groupmems groupmems.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -lpam -lpam_misc -lselinux gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o groupmod.o groupmod.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o groupmod groupmod.o ../libmisc/libmisc.a ../lib/libshadow.la -laudit -lselinux libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o groupmod groupmod.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -laudit -lselinux gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o grpck.o grpck.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o grpck grpck.o ../libmisc/libmisc.a ../lib/libshadow.la -lselinux libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o grpck grpck.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -lselinux gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o grpconv.o grpconv.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o grpconv grpconv.o ../libmisc/libmisc.a ../lib/libshadow.la -lselinux libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o grpconv grpconv.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -lselinux gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o grpunconv.o grpunconv.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o grpunconv grpunconv.o ../libmisc/libmisc.a ../lib/libshadow.la -lselinux libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o grpunconv grpunconv.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -lselinux gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o logoutd.o logoutd.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o logoutd logoutd.o ../libmisc/libmisc.a ../lib/libshadow.la libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o logoutd logoutd.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o newusers.o newusers.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o newusers newusers.o ../libmisc/libmisc.a ../lib/libshadow.la -lpam -lpam_misc -lselinux -lcrypt libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o newusers newusers.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -lpam -lpam_misc -lselinux -lcrypt gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o nologin.o nologin.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o nologin nologin.o libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o nologin nologin.o gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o pwck.o pwck.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o pwck pwck.o ../libmisc/libmisc.a ../lib/libshadow.la -lselinux libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o pwck pwck.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -lselinux gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o pwconv.o pwconv.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o pwconv pwconv.o ../libmisc/libmisc.a ../lib/libshadow.la -lselinux libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o pwconv pwconv.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -lselinux gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o pwunconv.o pwunconv.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o pwunconv pwunconv.o ../libmisc/libmisc.a ../lib/libshadow.la -lselinux libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o pwunconv pwunconv.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -lselinux gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o useradd.o useradd.c useradd.c: In function 'main': useradd.c:2292:19: warning: passing argument 1 of 'tallylog_reset' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] tallylog_reset (user_name); ^~~~~~~~~ useradd.c:1796:35: note: expected 'char *' but argument is of type 'const char *' static void tallylog_reset (char *user_name) ~~~~~~^~~~~~~~~ useradd.c: In function 'create_home': useradd.c:1968:3: warning: ignoring return value of 'chown', declared with attribute warn_unused_result [-Wunused-result] chown (user_home, user_id, user_gid); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o useradd useradd.o ../libmisc/libmisc.a ../lib/libshadow.la -laudit -lselinux -lsemanage libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o useradd useradd.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -laudit -lselinux -lsemanage gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o userdel.o userdel.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o userdel userdel.o ../libmisc/libmisc.a ../lib/libshadow.la -laudit -lselinux -lsemanage libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o userdel userdel.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -laudit -lselinux -lsemanage gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o usermod.o usermod.c /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o usermod usermod.o ../libmisc/libmisc.a ../lib/libshadow.la -laudit -lselinux -lsemanage libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o usermod usermod.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -laudit -lselinux -lsemanage gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -c -o vipw.o vipw.c vipw.c: In function 'vipwedit': vipw.c:404:2: warning: ignoring return value of 'link', declared with attribute warn_unused_result [-Wunused-result] link (file, filebackup); ^~~~~~~~~~~~~~~~~~~~~~~ /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z,relro -Wl,-z,now -o vipw vipw.o ../libmisc/libmisc.a ../lib/libshadow.la -lselinux libtool: link: gcc -g -O2 -ffile-prefix-map=/build/shadow-4.5=. -fstack-protector-strong -Wformat -Werror=format-security -DDEFAULT_EDITOR=\"sensible-editor\" -Wl,-z -Wl,relro -Wl,-z -Wl,now -o vipw vipw.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -lselinux make[3]: Leaving directory '/build/shadow-4.5/src' Making all in contrib make[3]: Entering directory '/build/shadow-4.5/contrib' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/shadow-4.5/contrib' Making all in doc make[3]: Entering directory '/build/shadow-4.5/doc' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/shadow-4.5/doc' Making all in etc make[3]: Entering directory '/build/shadow-4.5/etc' Making all in pam.d make[4]: Entering directory '/build/shadow-4.5/etc/pam.d' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/shadow-4.5/etc/pam.d' make[4]: Entering directory '/build/shadow-4.5/etc' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/shadow-4.5/etc' make[3]: Leaving directory '/build/shadow-4.5/etc' make[3]: Entering directory '/build/shadow-4.5' make[3]: Leaving directory '/build/shadow-4.5' make[2]: Leaving directory '/build/shadow-4.5' make[1]: Leaving directory '/build/shadow-4.5' touch debian/stamp-makefile-build CDBS WARNING: DEB_MAKE_CHECK_TARGET unset, not running checks fakeroot debian/rules binary test -x debian/rules dh_testroot dh_prep dh_installdirs -A mkdir -p "." set -e; mv ./config.guess ./config.guess.cdbs-orig; cp --remove-destination /usr/share/misc/config.guess ./config.guess; set -e; mv ./config.sub ./config.sub.cdbs-orig; cp --remove-destination /usr/share/misc/config.sub ./config.sub; CDBS WARNING: DEB_MAKE_CHECK_TARGET unset, not running checks /usr/bin/make -C . install DESTDIR=/build/shadow-4.5/debian/tmp make[1]: Entering directory '/build/shadow-4.5' Making install in po make[2]: Entering directory '/build/shadow-4.5/po' /bin/mkdir -p /build/shadow-4.5/debian/tmp/usr/share installing bs.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/bs/LC_MESSAGES/shadow.mo installing ca.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/ca/LC_MESSAGES/shadow.mo installing cs.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/cs/LC_MESSAGES/shadow.mo installing da.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/da/LC_MESSAGES/shadow.mo installing de.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/de/LC_MESSAGES/shadow.mo installing dz.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/dz/LC_MESSAGES/shadow.mo installing el.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/el/LC_MESSAGES/shadow.mo installing es.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/es/LC_MESSAGES/shadow.mo installing eu.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/eu/LC_MESSAGES/shadow.mo installing fi.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/fi/LC_MESSAGES/shadow.mo installing fr.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/fr/LC_MESSAGES/shadow.mo installing gl.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/gl/LC_MESSAGES/shadow.mo installing he.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/he/LC_MESSAGES/shadow.mo installing hu.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/hu/LC_MESSAGES/shadow.mo installing id.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/id/LC_MESSAGES/shadow.mo installing it.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/it/LC_MESSAGES/shadow.mo installing ja.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/ja/LC_MESSAGES/shadow.mo installing kk.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/kk/LC_MESSAGES/shadow.mo installing km.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/km/LC_MESSAGES/shadow.mo installing ko.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/ko/LC_MESSAGES/shadow.mo installing nb.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/nb/LC_MESSAGES/shadow.mo installing ne.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/ne/LC_MESSAGES/shadow.mo installing nl.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/nl/LC_MESSAGES/shadow.mo installing nn.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/nn/LC_MESSAGES/shadow.mo installing pl.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/pl/LC_MESSAGES/shadow.mo installing pt.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/pt/LC_MESSAGES/shadow.mo installing pt_BR.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/pt_BR/LC_MESSAGES/shadow.mo installing ro.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/ro/LC_MESSAGES/shadow.mo installing ru.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/ru/LC_MESSAGES/shadow.mo installing sk.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/sk/LC_MESSAGES/shadow.mo installing sq.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/sq/LC_MESSAGES/shadow.mo installing sv.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/sv/LC_MESSAGES/shadow.mo installing tl.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/tl/LC_MESSAGES/shadow.mo installing tr.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/tr/LC_MESSAGES/shadow.mo installing uk.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/uk/LC_MESSAGES/shadow.mo installing vi.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/vi/LC_MESSAGES/shadow.mo installing zh_CN.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/zh_CN/LC_MESSAGES/shadow.mo installing zh_TW.gmo as /build/shadow-4.5/debian/tmp/usr/share/locale/zh_TW/LC_MESSAGES/shadow.mo if test "shadow" = "gettext-tools"; then \ /bin/mkdir -p /build/shadow-4.5/debian/tmp/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/install -c -m 644 ./$file \ /build/shadow-4.5/debian/tmp/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /build/shadow-4.5/debian/tmp/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[2]: Leaving directory '/build/shadow-4.5/po' Making install in man make[2]: Entering directory '/build/shadow-4.5/man' Making install in po make[3]: Entering directory '/build/shadow-4.5/man/po' make[3]: Nothing to be done for 'install'. make[3]: Leaving directory '/build/shadow-4.5/man/po' Making install in cs make[3]: Entering directory '/build/shadow-4.5/man/cs' make[4]: Entering directory '/build/shadow-4.5/man/cs' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/cs/man1' /usr/bin/install -c -m 644 man1/expiry.1 man1/gpasswd.1 man1/groups.1 man1/su.1 '/build/shadow-4.5/debian/tmp/usr/share/man/cs/man1' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/cs/man5' /usr/bin/install -c -m 644 man5/faillog.5 man5/gshadow.5 man5/passwd.5 man5/shadow.5 '/build/shadow-4.5/debian/tmp/usr/share/man/cs/man5' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/cs/man8' /usr/bin/install -c -m 644 man8/faillog.8 man8/groupadd.8 man8/groupdel.8 man8/groupmod.8 man8/grpck.8 man8/lastlog.8 man8/nologin.8 man8/vipw.8 '/build/shadow-4.5/debian/tmp/usr/share/man/cs/man8' make[4]: Leaving directory '/build/shadow-4.5/man/cs' make[3]: Leaving directory '/build/shadow-4.5/man/cs' Making install in da make[3]: Entering directory '/build/shadow-4.5/man/da' make[4]: Entering directory '/build/shadow-4.5/man/da' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/da/man1' /usr/bin/install -c -m 644 man1/chfn.1 man1/groups.1 man1/newgrp.1 man1/sg.1 '/build/shadow-4.5/debian/tmp/usr/share/man/da/man1' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/da/man5' /usr/bin/install -c -m 644 man5/gshadow.5 '/build/shadow-4.5/debian/tmp/usr/share/man/da/man5' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/da/man8' /usr/bin/install -c -m 644 man8/groupdel.8 man8/logoutd.8 man8/nologin.8 man8/vigr.8 man8/vipw.8 '/build/shadow-4.5/debian/tmp/usr/share/man/da/man8' make[4]: Leaving directory '/build/shadow-4.5/man/da' make[3]: Leaving directory '/build/shadow-4.5/man/da' Making install in de make[3]: Entering directory '/build/shadow-4.5/man/de' make[4]: Entering directory '/build/shadow-4.5/man/de' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/de/man1' /usr/bin/install -c -m 644 man1/chage.1 man1/chfn.1 man1/chsh.1 man1/expiry.1 man1/gpasswd.1 man1/groups.1 man1/login.1 man1/newgrp.1 man1/passwd.1 man1/sg.1 man1/su.1 '/build/shadow-4.5/debian/tmp/usr/share/man/de/man1' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/de/man3' /usr/bin/install -c -m 644 man3/getspnam.3 man3/shadow.3 '/build/shadow-4.5/debian/tmp/usr/share/man/de/man3' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/de/man5' /usr/bin/install -c -m 644 man5/faillog.5 man5/gshadow.5 man5/login.defs.5 man5/passwd.5 man5/shadow.5 man5/suauth.5 '/build/shadow-4.5/debian/tmp/usr/share/man/de/man5' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/de/man8' /usr/bin/install -c -m 644 man8/chgpasswd.8 man8/chpasswd.8 man8/faillog.8 man8/groupadd.8 man8/groupdel.8 man8/groupmems.8 man8/groupmod.8 man8/grpck.8 man8/grpconv.8 man8/grpunconv.8 man8/lastlog.8 man8/logoutd.8 man8/newusers.8 man8/nologin.8 man8/pwck.8 man8/pwconv.8 man8/pwunconv.8 man8/useradd.8 man8/userdel.8 man8/usermod.8 man8/vigr.8 man8/vipw.8 '/build/shadow-4.5/debian/tmp/usr/share/man/de/man8' make[4]: Leaving directory '/build/shadow-4.5/man/de' make[3]: Leaving directory '/build/shadow-4.5/man/de' Making install in es make[3]: Entering directory '/build/shadow-4.5/man/es' make[4]: Entering directory '/build/shadow-4.5/man/es' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/shadow-4.5/man/es' make[3]: Leaving directory '/build/shadow-4.5/man/es' Making install in fi make[3]: Entering directory '/build/shadow-4.5/man/fi' make[4]: Entering directory '/build/shadow-4.5/man/fi' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/fi/man1' /usr/bin/install -c -m 644 man1/chfn.1 man1/chsh.1 man1/su.1 '/build/shadow-4.5/debian/tmp/usr/share/man/fi/man1' make[4]: Leaving directory '/build/shadow-4.5/man/fi' make[3]: Leaving directory '/build/shadow-4.5/man/fi' Making install in fr make[3]: Entering directory '/build/shadow-4.5/man/fr' make[4]: Entering directory '/build/shadow-4.5/man/fr' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/fr/man1' /usr/bin/install -c -m 644 man1/chage.1 man1/chfn.1 man1/chsh.1 man1/expiry.1 man1/gpasswd.1 man1/groups.1 man1/login.1 man1/newgrp.1 man1/passwd.1 man1/sg.1 man1/su.1 man1/newgidmap.1 man1/newuidmap.1 '/build/shadow-4.5/debian/tmp/usr/share/man/fr/man1' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/fr/man3' /usr/bin/install -c -m 644 man3/getspnam.3 man3/shadow.3 '/build/shadow-4.5/debian/tmp/usr/share/man/fr/man3' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/fr/man5' /usr/bin/install -c -m 644 man5/faillog.5 man5/gshadow.5 man5/login.defs.5 man5/passwd.5 man5/shadow.5 man5/suauth.5 man5/subgid.5 man5/subuid.5 '/build/shadow-4.5/debian/tmp/usr/share/man/fr/man5' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/fr/man8' /usr/bin/install -c -m 644 man8/chgpasswd.8 man8/chpasswd.8 man8/faillog.8 man8/groupadd.8 man8/groupdel.8 man8/groupmems.8 man8/groupmod.8 man8/grpck.8 man8/grpconv.8 man8/grpunconv.8 man8/lastlog.8 man8/logoutd.8 man8/newusers.8 man8/nologin.8 man8/pwck.8 man8/pwconv.8 man8/pwunconv.8 man8/useradd.8 man8/userdel.8 man8/usermod.8 man8/vigr.8 man8/vipw.8 '/build/shadow-4.5/debian/tmp/usr/share/man/fr/man8' make[4]: Leaving directory '/build/shadow-4.5/man/fr' make[3]: Leaving directory '/build/shadow-4.5/man/fr' Making install in hu make[3]: Entering directory '/build/shadow-4.5/man/hu' make[4]: Entering directory '/build/shadow-4.5/man/hu' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/hu/man1' /usr/bin/install -c -m 644 man1/chsh.1 man1/gpasswd.1 man1/groups.1 man1/login.1 man1/newgrp.1 man1/passwd.1 man1/sg.1 man1/su.1 '/build/shadow-4.5/debian/tmp/usr/share/man/hu/man1' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/hu/man5' /usr/bin/install -c -m 644 man5/passwd.5 '/build/shadow-4.5/debian/tmp/usr/share/man/hu/man5' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/hu/man8' /usr/bin/install -c -m 644 man8/lastlog.8 '/build/shadow-4.5/debian/tmp/usr/share/man/hu/man8' make[4]: Leaving directory '/build/shadow-4.5/man/hu' make[3]: Leaving directory '/build/shadow-4.5/man/hu' Making install in id make[3]: Entering directory '/build/shadow-4.5/man/id' make[4]: Entering directory '/build/shadow-4.5/man/id' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/id/man1' /usr/bin/install -c -m 644 man1/chsh.1 man1/login.1 '/build/shadow-4.5/debian/tmp/usr/share/man/id/man1' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/id/man8' /usr/bin/install -c -m 644 man8/useradd.8 '/build/shadow-4.5/debian/tmp/usr/share/man/id/man8' make[4]: Leaving directory '/build/shadow-4.5/man/id' make[3]: Leaving directory '/build/shadow-4.5/man/id' Making install in it make[3]: Entering directory '/build/shadow-4.5/man/it' make[4]: Entering directory '/build/shadow-4.5/man/it' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/it/man1' /usr/bin/install -c -m 644 man1/chage.1 man1/chfn.1 man1/chsh.1 man1/expiry.1 man1/gpasswd.1 man1/groups.1 man1/login.1 man1/newgrp.1 man1/passwd.1 man1/sg.1 man1/su.1 '/build/shadow-4.5/debian/tmp/usr/share/man/it/man1' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/it/man3' /usr/bin/install -c -m 644 man3/getspnam.3 man3/shadow.3 '/build/shadow-4.5/debian/tmp/usr/share/man/it/man3' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/it/man5' /usr/bin/install -c -m 644 man5/faillog.5 man5/gshadow.5 man5/login.defs.5 man5/passwd.5 man5/shadow.5 man5/suauth.5 '/build/shadow-4.5/debian/tmp/usr/share/man/it/man5' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/it/man8' /usr/bin/install -c -m 644 man8/chgpasswd.8 man8/chpasswd.8 man8/faillog.8 man8/groupadd.8 man8/groupdel.8 man8/groupmems.8 man8/groupmod.8 man8/grpck.8 man8/grpconv.8 man8/grpunconv.8 man8/lastlog.8 man8/logoutd.8 man8/newusers.8 man8/nologin.8 man8/pwck.8 man8/pwconv.8 man8/pwunconv.8 man8/useradd.8 man8/userdel.8 man8/usermod.8 man8/vigr.8 man8/vipw.8 '/build/shadow-4.5/debian/tmp/usr/share/man/it/man8' make[4]: Leaving directory '/build/shadow-4.5/man/it' make[3]: Leaving directory '/build/shadow-4.5/man/it' Making install in ja make[3]: Entering directory '/build/shadow-4.5/man/ja' make[4]: Entering directory '/build/shadow-4.5/man/ja' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/ja/man1' /usr/bin/install -c -m 644 man1/chage.1 man1/chfn.1 man1/chsh.1 man1/expiry.1 man1/gpasswd.1 man1/groups.1 man1/login.1 man1/newgrp.1 man1/passwd.1 man1/sg.1 man1/su.1 '/build/shadow-4.5/debian/tmp/usr/share/man/ja/man1' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/ja/man5' /usr/bin/install -c -m 644 man5/faillog.5 man5/login.defs.5 man5/passwd.5 man5/shadow.5 man5/suauth.5 '/build/shadow-4.5/debian/tmp/usr/share/man/ja/man5' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/ja/man8' /usr/bin/install -c -m 644 man8/chpasswd.8 man8/faillog.8 man8/groupadd.8 man8/groupdel.8 man8/groupmod.8 man8/grpck.8 man8/grpconv.8 man8/grpunconv.8 man8/lastlog.8 man8/logoutd.8 man8/newusers.8 man8/pwck.8 man8/pwconv.8 man8/pwunconv.8 man8/useradd.8 man8/userdel.8 man8/usermod.8 man8/vigr.8 man8/vipw.8 '/build/shadow-4.5/debian/tmp/usr/share/man/ja/man8' make[4]: Leaving directory '/build/shadow-4.5/man/ja' make[3]: Leaving directory '/build/shadow-4.5/man/ja' Making install in ko make[3]: Entering directory '/build/shadow-4.5/man/ko' make[4]: Entering directory '/build/shadow-4.5/man/ko' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/ko/man1' /usr/bin/install -c -m 644 man1/chfn.1 man1/chsh.1 man1/groups.1 man1/login.1 man1/su.1 '/build/shadow-4.5/debian/tmp/usr/share/man/ko/man1' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/ko/man5' /usr/bin/install -c -m 644 man5/passwd.5 '/build/shadow-4.5/debian/tmp/usr/share/man/ko/man5' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/ko/man8' /usr/bin/install -c -m 644 man8/vigr.8 man8/vipw.8 '/build/shadow-4.5/debian/tmp/usr/share/man/ko/man8' make[4]: Leaving directory '/build/shadow-4.5/man/ko' make[3]: Leaving directory '/build/shadow-4.5/man/ko' Making install in pl make[3]: Entering directory '/build/shadow-4.5/man/pl' make[4]: Entering directory '/build/shadow-4.5/man/pl' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/pl/man1' /usr/bin/install -c -m 644 man1/chage.1 man1/chsh.1 man1/expiry.1 man1/groups.1 man1/newgrp.1 man1/sg.1 '/build/shadow-4.5/debian/tmp/usr/share/man/pl/man1' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/pl/man3' /usr/bin/install -c -m 644 man3/getspnam.3 man3/shadow.3 '/build/shadow-4.5/debian/tmp/usr/share/man/pl/man3' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/pl/man5' /usr/bin/install -c -m 644 man5/faillog.5 '/build/shadow-4.5/debian/tmp/usr/share/man/pl/man5' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/pl/man8' /usr/bin/install -c -m 644 man8/faillog.8 man8/groupadd.8 man8/groupdel.8 man8/groupmems.8 man8/groupmod.8 man8/grpck.8 man8/lastlog.8 man8/logoutd.8 man8/userdel.8 man8/usermod.8 man8/vigr.8 man8/vipw.8 '/build/shadow-4.5/debian/tmp/usr/share/man/pl/man8' make[4]: Leaving directory '/build/shadow-4.5/man/pl' make[3]: Leaving directory '/build/shadow-4.5/man/pl' Making install in pt_BR make[3]: Entering directory '/build/shadow-4.5/man/pt_BR' make[4]: Entering directory '/build/shadow-4.5/man/pt_BR' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/pt_BR/man1' /usr/bin/install -c -m 644 man1/gpasswd.1 '/build/shadow-4.5/debian/tmp/usr/share/man/pt_BR/man1' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/pt_BR/man5' /usr/bin/install -c -m 644 man5/passwd.5 man5/shadow.5 '/build/shadow-4.5/debian/tmp/usr/share/man/pt_BR/man5' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/pt_BR/man8' /usr/bin/install -c -m 644 man8/groupadd.8 man8/groupdel.8 man8/groupmod.8 '/build/shadow-4.5/debian/tmp/usr/share/man/pt_BR/man8' make[4]: Leaving directory '/build/shadow-4.5/man/pt_BR' make[3]: Leaving directory '/build/shadow-4.5/man/pt_BR' Making install in ru make[3]: Entering directory '/build/shadow-4.5/man/ru' make[4]: Entering directory '/build/shadow-4.5/man/ru' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/ru/man1' /usr/bin/install -c -m 644 man1/chage.1 man1/chfn.1 man1/chsh.1 man1/expiry.1 man1/gpasswd.1 man1/groups.1 man1/login.1 man1/newgrp.1 man1/passwd.1 man1/sg.1 man1/su.1 '/build/shadow-4.5/debian/tmp/usr/share/man/ru/man1' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/ru/man3' /usr/bin/install -c -m 644 man3/getspnam.3 man3/shadow.3 '/build/shadow-4.5/debian/tmp/usr/share/man/ru/man3' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/ru/man5' /usr/bin/install -c -m 644 man5/faillog.5 man5/gshadow.5 man5/login.defs.5 man5/passwd.5 man5/shadow.5 man5/suauth.5 '/build/shadow-4.5/debian/tmp/usr/share/man/ru/man5' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/ru/man8' /usr/bin/install -c -m 644 man8/chgpasswd.8 man8/chpasswd.8 man8/faillog.8 man8/groupadd.8 man8/groupdel.8 man8/groupmems.8 man8/groupmod.8 man8/grpck.8 man8/grpconv.8 man8/grpunconv.8 man8/lastlog.8 man8/logoutd.8 man8/newusers.8 man8/nologin.8 man8/pwck.8 man8/pwconv.8 man8/pwunconv.8 man8/useradd.8 man8/userdel.8 man8/usermod.8 man8/vigr.8 man8/vipw.8 '/build/shadow-4.5/debian/tmp/usr/share/man/ru/man8' make[4]: Leaving directory '/build/shadow-4.5/man/ru' make[3]: Leaving directory '/build/shadow-4.5/man/ru' Making install in sv make[3]: Entering directory '/build/shadow-4.5/man/sv' make[4]: Entering directory '/build/shadow-4.5/man/sv' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/sv/man1' /usr/bin/install -c -m 644 man1/chage.1 man1/chsh.1 man1/expiry.1 man1/groups.1 man1/newgrp.1 man1/passwd.1 man1/sg.1 '/build/shadow-4.5/debian/tmp/usr/share/man/sv/man1' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/sv/man3' /usr/bin/install -c -m 644 man3/getspnam.3 man3/shadow.3 '/build/shadow-4.5/debian/tmp/usr/share/man/sv/man3' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/sv/man5' /usr/bin/install -c -m 644 man5/faillog.5 man5/gshadow.5 man5/passwd.5 man5/suauth.5 '/build/shadow-4.5/debian/tmp/usr/share/man/sv/man5' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/sv/man8' /usr/bin/install -c -m 644 man8/faillog.8 man8/groupadd.8 man8/groupdel.8 man8/groupmems.8 man8/groupmod.8 man8/grpck.8 man8/lastlog.8 man8/logoutd.8 man8/nologin.8 man8/pwck.8 man8/userdel.8 man8/vigr.8 man8/vipw.8 '/build/shadow-4.5/debian/tmp/usr/share/man/sv/man8' make[4]: Leaving directory '/build/shadow-4.5/man/sv' make[3]: Leaving directory '/build/shadow-4.5/man/sv' Making install in tr make[3]: Entering directory '/build/shadow-4.5/man/tr' make[4]: Entering directory '/build/shadow-4.5/man/tr' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/tr/man1' /usr/bin/install -c -m 644 man1/chage.1 man1/chfn.1 man1/login.1 man1/passwd.1 man1/su.1 '/build/shadow-4.5/debian/tmp/usr/share/man/tr/man1' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/tr/man5' /usr/bin/install -c -m 644 man5/passwd.5 man5/shadow.5 '/build/shadow-4.5/debian/tmp/usr/share/man/tr/man5' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/tr/man8' /usr/bin/install -c -m 644 man8/groupadd.8 man8/groupdel.8 man8/groupmod.8 man8/useradd.8 man8/userdel.8 man8/usermod.8 '/build/shadow-4.5/debian/tmp/usr/share/man/tr/man8' make[4]: Leaving directory '/build/shadow-4.5/man/tr' make[3]: Leaving directory '/build/shadow-4.5/man/tr' Making install in zh_CN make[3]: Entering directory '/build/shadow-4.5/man/zh_CN' make[4]: Entering directory '/build/shadow-4.5/man/zh_CN' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/zh_CN/man1' /usr/bin/install -c -m 644 man1/chage.1 man1/chfn.1 man1/chsh.1 man1/expiry.1 man1/gpasswd.1 man1/groups.1 man1/login.1 man1/newgrp.1 man1/passwd.1 man1/sg.1 man1/su.1 '/build/shadow-4.5/debian/tmp/usr/share/man/zh_CN/man1' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/zh_CN/man3' /usr/bin/install -c -m 644 man3/getspnam.3 man3/shadow.3 '/build/shadow-4.5/debian/tmp/usr/share/man/zh_CN/man3' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/zh_CN/man5' /usr/bin/install -c -m 644 man5/faillog.5 man5/gshadow.5 man5/login.defs.5 man5/passwd.5 man5/shadow.5 man5/suauth.5 '/build/shadow-4.5/debian/tmp/usr/share/man/zh_CN/man5' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/zh_CN/man8' /usr/bin/install -c -m 644 man8/chgpasswd.8 man8/chpasswd.8 man8/faillog.8 man8/groupadd.8 man8/groupdel.8 man8/groupmems.8 man8/groupmod.8 man8/grpck.8 man8/grpconv.8 man8/grpunconv.8 man8/lastlog.8 man8/logoutd.8 man8/newusers.8 man8/nologin.8 man8/pwck.8 man8/pwconv.8 man8/pwunconv.8 man8/useradd.8 man8/userdel.8 man8/usermod.8 man8/vigr.8 man8/vipw.8 '/build/shadow-4.5/debian/tmp/usr/share/man/zh_CN/man8' make[4]: Leaving directory '/build/shadow-4.5/man/zh_CN' make[3]: Leaving directory '/build/shadow-4.5/man/zh_CN' Making install in zh_TW make[3]: Entering directory '/build/shadow-4.5/man/zh_TW' make[4]: Entering directory '/build/shadow-4.5/man/zh_TW' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/zh_TW/man1' /usr/bin/install -c -m 644 man1/chfn.1 man1/chsh.1 man1/newgrp.1 man1/su.1 '/build/shadow-4.5/debian/tmp/usr/share/man/zh_TW/man1' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/zh_TW/man5' /usr/bin/install -c -m 644 man5/passwd.5 '/build/shadow-4.5/debian/tmp/usr/share/man/zh_TW/man5' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/zh_TW/man8' /usr/bin/install -c -m 644 man8/chpasswd.8 man8/groupadd.8 man8/groupdel.8 man8/groupmod.8 man8/useradd.8 man8/userdel.8 man8/usermod.8 '/build/shadow-4.5/debian/tmp/usr/share/man/zh_TW/man8' make[4]: Leaving directory '/build/shadow-4.5/man/zh_TW' make[3]: Leaving directory '/build/shadow-4.5/man/zh_TW' make[3]: Entering directory '/build/shadow-4.5/man' make[4]: Entering directory '/build/shadow-4.5/man' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/man1' /usr/bin/install -c -m 644 man1/chage.1 man1/chfn.1 man1/chsh.1 man1/expiry.1 man1/gpasswd.1 man1/groups.1 man1/login.1 man1/newgrp.1 man1/passwd.1 man1/sg.1 man1/su.1 man1/newgidmap.1 man1/newuidmap.1 '/build/shadow-4.5/debian/tmp/usr/share/man/man1' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/man3' /usr/bin/install -c -m 644 man3/getspnam.3 man3/shadow.3 '/build/shadow-4.5/debian/tmp/usr/share/man/man3' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/man5' /usr/bin/install -c -m 644 man5/faillog.5 man5/gshadow.5 man5/login.defs.5 man5/passwd.5 man5/shadow.5 man5/suauth.5 man5/subgid.5 man5/subuid.5 '/build/shadow-4.5/debian/tmp/usr/share/man/man5' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/share/man/man8' /usr/bin/install -c -m 644 man8/chgpasswd.8 man8/chpasswd.8 man8/faillog.8 man8/groupadd.8 man8/groupdel.8 man8/groupmems.8 man8/groupmod.8 man8/grpck.8 man8/grpconv.8 man8/grpunconv.8 man8/lastlog.8 man8/logoutd.8 man8/newusers.8 man8/nologin.8 man8/pwck.8 man8/pwconv.8 man8/pwunconv.8 man8/useradd.8 man8/userdel.8 man8/usermod.8 man8/vigr.8 man8/vipw.8 '/build/shadow-4.5/debian/tmp/usr/share/man/man8' make[4]: Leaving directory '/build/shadow-4.5/man' make[3]: Leaving directory '/build/shadow-4.5/man' make[2]: Leaving directory '/build/shadow-4.5/man' Making install in libmisc make[2]: Entering directory '/build/shadow-4.5/libmisc' make[3]: Entering directory '/build/shadow-4.5/libmisc' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/shadow-4.5/libmisc' make[2]: Leaving directory '/build/shadow-4.5/libmisc' Making install in lib make[2]: Entering directory '/build/shadow-4.5/lib' make[3]: Entering directory '/build/shadow-4.5/lib' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/shadow-4.5/lib' make[2]: Leaving directory '/build/shadow-4.5/lib' Making install in src make[2]: Entering directory '/build/shadow-4.5/src' /usr/bin/make install-exec-am install-data-am make[3]: Entering directory '/build/shadow-4.5/src' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c groups login su '/build/shadow-4.5/debian/tmp/bin' libtool: install: /usr/bin/install -c groups /build/shadow-4.5/debian/tmp/bin/groups libtool: install: /usr/bin/install -c login /build/shadow-4.5/debian/tmp/bin/login libtool: install: /usr/bin/install -c su /build/shadow-4.5/debian/tmp/bin/su /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/bin' /bin/sh ../libtool --mode=install /usr/bin/install -c faillog lastlog chage chfn chsh expiry gpasswd newgrp passwd newgidmap newuidmap '/build/shadow-4.5/debian/tmp/usr/bin' libtool: install: /usr/bin/install -c faillog /build/shadow-4.5/debian/tmp/usr/bin/faillog libtool: install: /usr/bin/install -c lastlog /build/shadow-4.5/debian/tmp/usr/bin/lastlog libtool: install: /usr/bin/install -c chage /build/shadow-4.5/debian/tmp/usr/bin/chage libtool: install: /usr/bin/install -c chfn /build/shadow-4.5/debian/tmp/usr/bin/chfn libtool: install: /usr/bin/install -c chsh /build/shadow-4.5/debian/tmp/usr/bin/chsh libtool: install: /usr/bin/install -c expiry /build/shadow-4.5/debian/tmp/usr/bin/expiry libtool: install: /usr/bin/install -c gpasswd /build/shadow-4.5/debian/tmp/usr/bin/gpasswd libtool: install: /usr/bin/install -c newgrp /build/shadow-4.5/debian/tmp/usr/bin/newgrp libtool: install: /usr/bin/install -c passwd /build/shadow-4.5/debian/tmp/usr/bin/passwd libtool: install: /usr/bin/install -c newgidmap /build/shadow-4.5/debian/tmp/usr/bin/newgidmap libtool: install: /usr/bin/install -c newuidmap /build/shadow-4.5/debian/tmp/usr/bin/newuidmap /bin/mkdir -p '/build/shadow-4.5/debian/tmp/usr/sbin' /bin/sh ../libtool --mode=install /usr/bin/install -c cppw chgpasswd chpasswd groupadd groupdel groupmems groupmod grpck grpconv grpunconv logoutd newusers nologin pwck pwconv pwunconv useradd userdel usermod vipw '/build/shadow-4.5/debian/tmp/usr/sbin' libtool: install: /usr/bin/install -c cppw /build/shadow-4.5/debian/tmp/usr/sbin/cppw libtool: install: /usr/bin/install -c chgpasswd /build/shadow-4.5/debian/tmp/usr/sbin/chgpasswd libtool: install: /usr/bin/install -c chpasswd /build/shadow-4.5/debian/tmp/usr/sbin/chpasswd libtool: install: /usr/bin/install -c groupadd /build/shadow-4.5/debian/tmp/usr/sbin/groupadd libtool: install: /usr/bin/install -c groupdel /build/shadow-4.5/debian/tmp/usr/sbin/groupdel libtool: install: /usr/bin/install -c groupmems /build/shadow-4.5/debian/tmp/usr/sbin/groupmems libtool: install: /usr/bin/install -c groupmod /build/shadow-4.5/debian/tmp/usr/sbin/groupmod libtool: install: /usr/bin/install -c grpck /build/shadow-4.5/debian/tmp/usr/sbin/grpck libtool: install: /usr/bin/install -c grpconv /build/shadow-4.5/debian/tmp/usr/sbin/grpconv libtool: install: /usr/bin/install -c grpunconv /build/shadow-4.5/debian/tmp/usr/sbin/grpunconv libtool: install: /usr/bin/install -c logoutd /build/shadow-4.5/debian/tmp/usr/sbin/logoutd libtool: install: /usr/bin/install -c newusers /build/shadow-4.5/debian/tmp/usr/sbin/newusers libtool: install: /usr/bin/install -c nologin /build/shadow-4.5/debian/tmp/usr/sbin/nologin libtool: install: /usr/bin/install -c pwck /build/shadow-4.5/debian/tmp/usr/sbin/pwck libtool: install: /usr/bin/install -c pwconv /build/shadow-4.5/debian/tmp/usr/sbin/pwconv libtool: install: /usr/bin/install -c pwunconv /build/shadow-4.5/debian/tmp/usr/sbin/pwunconv libtool: install: /usr/bin/install -c useradd /build/shadow-4.5/debian/tmp/usr/sbin/useradd libtool: install: /usr/bin/install -c userdel /build/shadow-4.5/debian/tmp/usr/sbin/userdel libtool: install: /usr/bin/install -c usermod /build/shadow-4.5/debian/tmp/usr/sbin/usermod libtool: install: /usr/bin/install -c vipw /build/shadow-4.5/debian/tmp/usr/sbin/vipw make[3]: Leaving directory '/build/shadow-4.5/src' ln -sf newgrp /build/shadow-4.5/debian/tmp/usr/bin/sg ln -sf vipw /build/shadow-4.5/debian/tmp/usr/sbin/vigr for i in su; do \ chmod 4755 /build/shadow-4.5/debian/tmp/bin/$i; \ done for i in chage chfn chsh expiry gpasswd newgrp passwd newgidmap newuidmap; do \ chmod 4755 /build/shadow-4.5/debian/tmp/usr/bin/$i; \ done make[2]: Leaving directory '/build/shadow-4.5/src' Making install in contrib make[2]: Entering directory '/build/shadow-4.5/contrib' make[3]: Entering directory '/build/shadow-4.5/contrib' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/shadow-4.5/contrib' make[2]: Leaving directory '/build/shadow-4.5/contrib' Making install in doc make[2]: Entering directory '/build/shadow-4.5/doc' make[3]: Entering directory '/build/shadow-4.5/doc' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/shadow-4.5/doc' make[2]: Leaving directory '/build/shadow-4.5/doc' Making install in etc make[2]: Entering directory '/build/shadow-4.5/etc' Making install in pam.d make[3]: Entering directory '/build/shadow-4.5/etc/pam.d' make[4]: Entering directory '/build/shadow-4.5/etc/pam.d' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/shadow-4.5/debian/tmp/etc/pam.d' /usr/bin/install -c -m 644 chfn chsh groupmems login passwd su '/build/shadow-4.5/debian/tmp/etc/pam.d' make[4]: Leaving directory '/build/shadow-4.5/etc/pam.d' make[3]: Leaving directory '/build/shadow-4.5/etc/pam.d' make[3]: Entering directory '/build/shadow-4.5/etc' make[4]: Entering directory '/build/shadow-4.5/etc' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/etc' /usr/bin/install -c -m 644 login.defs '/build/shadow-4.5/debian/tmp/etc' /bin/mkdir -p '/build/shadow-4.5/debian/tmp/etc/default' /usr/bin/install -c -m 644 useradd '/build/shadow-4.5/debian/tmp/etc/default' make[4]: Leaving directory '/build/shadow-4.5/etc' make[3]: Leaving directory '/build/shadow-4.5/etc' make[2]: Leaving directory '/build/shadow-4.5/etc' make[2]: Entering directory '/build/shadow-4.5' make[3]: Entering directory '/build/shadow-4.5' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/shadow-4.5' make[2]: Leaving directory '/build/shadow-4.5' make[1]: Leaving directory '/build/shadow-4.5' touch debian/stamp-makefile-install Adding cdbs dependencies to debian/passwd.substvars dh_installdirs -ppasswd \ Adding cdbs dependencies to debian/login.substvars dh_installdirs -plogin \ Adding cdbs dependencies to debian/uidmap.substvars dh_installdirs -puidmap \ dh_installdocs -ppasswd ./README ./NEWS ./TODO dh_installexamples -ppasswd dh_installman -ppasswd dh_installinfo -ppasswd dh_installmenu -ppasswd dh_installcron -ppasswd dh_systemd_enable -ppasswd dh_installinit -ppasswd dh_installdebconf -ppasswd dh_installemacsen -ppasswd dh_installcatalogs -ppasswd dh_installpam -ppasswd dh_installlogrotate -ppasswd dh_installlogcheck -ppasswd dh_installchangelogs -ppasswd ./ChangeLog dh_installudev -ppasswd dh_lintian -ppasswd dh_bugfiles -ppasswd dh_install -ppasswd --sourcedir=debian/tmp dh_systemd_start -ppasswd dh_link -ppasswd dh_installmime -ppasswd dh_installgsettings -ppasswd install -c -m 444 man/shadowconfig.8 debian/passwd/usr/share/man/man8 install -c -m 444 man/ja/shadowconfig.8 debian/passwd/usr/share/man/ja/man8 install -c -m 444 man/pl/shadowconfig.8 debian/passwd/usr/share/man/pl/man8 install -c -m 444 man/fr/shadowconfig.8 debian/passwd/usr/share/man/fr/man8 # Distribute the pam.d files; unless for the commands with disabled PAM # support dh_installpam -p passwd --name=passwd dh_installpam -p passwd --name=chfn dh_installpam -p passwd --name=chsh dh_installpam -p passwd --name=chpasswd dh_installpam -p passwd --name=newusers install -c -m 644 debian/useradd.default debian/passwd/etc/default/useradd install -d debian/passwd/sbin install -c -m 555 debian/shadowconfig.sh debian/passwd/sbin/shadowconfig install -c -m 444 debian/cpgr.8 debian/passwd/usr/share/man/man8 install -c -m 444 debian/cppw.8 debian/passwd/usr/share/man/man8 dh_lintian -p passwd dh_installdocs -plogin ./README ./NEWS ./TODO dh_installexamples -plogin dh_installman -plogin dh_installinfo -plogin dh_installmenu -plogin dh_installcron -plogin dh_systemd_enable -plogin dh_installinit -plogin dh_installdebconf -plogin dh_installemacsen -plogin dh_installcatalogs -plogin dh_installpam -plogin dh_installlogrotate -plogin dh_installlogcheck -plogin dh_installchangelogs -plogin ./ChangeLog dh_installudev -plogin dh_lintian -plogin dh_bugfiles -plogin dh_install -plogin --sourcedir=debian/tmp dh_systemd_start -plogin dh_link -plogin dh_installmime -plogin dh_installgsettings -plogin dh_installpam -p login install -c -m 444 debian/login.defs debian/login/etc/login.defs install -c -m 444 debian/securetty.linux debian/login/etc/securetty dh_lintian -p login dh_installdocs -puidmap ./README ./NEWS ./TODO dh_installexamples -puidmap dh_installman -puidmap dh_installinfo -puidmap dh_installmenu -puidmap dh_installcron -puidmap dh_systemd_enable -puidmap dh_installinit -puidmap dh_installdebconf -puidmap dh_installemacsen -puidmap dh_installcatalogs -puidmap dh_installpam -puidmap dh_installlogrotate -puidmap dh_installlogcheck -puidmap dh_installchangelogs -puidmap ./ChangeLog dh_installudev -puidmap dh_lintian -puidmap dh_bugfiles -puidmap dh_install -puidmap --sourcedir=debian/tmp dh_systemd_start -puidmap dh_link -puidmap dh_installmime -puidmap dh_installgsettings -puidmap dh_strip -ppasswd dh_strip_nondeterminism -ppasswd dh_compress -ppasswd dh_fixperms -ppasswd dh_makeshlibs -ppasswd dh_strip -plogin dh_strip_nondeterminism -plogin Normalized debian/login/usr/share/locale/gl/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/bs/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/es/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/pl/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/zh_CN/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/it/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/ko/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/da/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/fi/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/cs/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/id/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/nn/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/zh_TW/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/ja/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/nl/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/sk/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/ro/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/ca/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/tr/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/eu/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/ne/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/sq/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/km/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/he/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/kk/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/sv/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/el/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/tl/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/pt/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/uk/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/dz/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/vi/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/ru/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/hu/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/de/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/nb/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/fr/LC_MESSAGES/shadow.mo Normalized debian/login/usr/share/locale/pt_BR/LC_MESSAGES/shadow.mo dh_compress -plogin dh_fixperms -plogin dh_makeshlibs -plogin dh_strip -puidmap dh_strip_nondeterminism -puidmap dh_compress -puidmap dh_fixperms -puidmap dh_makeshlibs -puidmap dh_installdeb -ppasswd dh_perl -ppasswd dh_shlibdeps -ppasswd chmod u+s debian/passwd/usr/bin/chfn chmod u+s debian/passwd/usr/bin/chsh chmod u+s debian/passwd/usr/bin/gpasswd chmod u+s debian/passwd/usr/bin/passwd chgrp shadow debian/passwd/usr/bin/chage chgrp shadow debian/passwd/usr/bin/expiry chmod g+s debian/passwd/usr/bin/chage chmod g+s debian/passwd/usr/bin/expiry dh_installdeb -plogin dh_perl -plogin dh_shlibdeps -plogin # No real need for login to be setuid root # chmod u+s debian/login/bin/login chmod u+s debian/login/usr/bin/newgrp dh_installdeb -puidmap dh_perl -puidmap dh_shlibdeps -puidmap chmod u+s debian/uidmap/usr/bin/newuidmap chmod u+s debian/uidmap/usr/bin/newgidmap dh_gencontrol -ppasswd dh_md5sums -ppasswd dh_builddeb -ppasswd dpkg-deb: building package 'passwd-dbgsym' in '../passwd-dbgsym_4.5-1.1_i386.deb'. dpkg-deb: building package 'passwd' in '../passwd_4.5-1.1_i386.deb'. dh_gencontrol -plogin dh_md5sums -plogin dh_builddeb -plogin dpkg-deb: building package 'login-dbgsym' in '../login-dbgsym_4.5-1.1_i386.deb'. dpkg-deb: building package 'login' in '../login_4.5-1.1_i386.deb'. dh_gencontrol -puidmap dh_md5sums -puidmap dh_builddeb -puidmap dpkg-deb: building package 'uidmap' in '../uidmap_4.5-1.1_i386.deb'. dpkg-deb: building package 'uidmap-dbgsym' in '../uidmap-dbgsym_4.5-1.1_i386.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../shadow_4.5-1.1_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/14232 and its subdirectories I: Current time: Thu Jun 17 13:33:41 -12 2021 I: pbuilder-time-stamp: 1623980021