I: pbuilder: network access will be disabled during build I: Current time: Thu Apr 23 13:29:51 -12 2020 I: pbuilder-time-stamp: 1587691791 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [ssed_3.62-7.dsc] I: copying [./ssed_3.62.orig.tar.gz] I: copying [./ssed_3.62-7.diff.gz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Fri Jul 13 15:16:15 2012 -12 gpgv: using DSA key 2DCE3F2836D4E4F5 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./ssed_3.62-7.dsc dpkg-source: info: extracting ssed in ssed-3.62 dpkg-source: info: unpacking ssed_3.62.orig.tar.gz dpkg-source: info: applying ssed_3.62-7.diff.gz dpkg-source: info: upstream files that have been modified: ssed-3.62/conf5841.file ssed-3.62/doc/sed-in.texi ssed-3.62/doc/sed.1 ssed-3.62/doc/sed.info ssed-3.62/doc/sed.texi ssed-3.62/doc/stamp-vti ssed-3.62/doc/version.texi ssed-3.62/pcre/pcregrep.c ssed-3.62/pcre/regexec.c ssed-3.62/pcre/regexp.c ssed-3.62/po/de.po ssed-3.62/testsuite/dc.good ssed-3.62/testsuite/eval.in2 ssed-3.62/testsuite/pcretest.c I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: texinfo, debhelper (>= 7), autotools-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19231 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on texinfo; however: Package texinfo is not installed. pbuilder-satisfydepends-dummy depends on debhelper (>= 7); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on autotools-dev; however: Package autotools-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbsd0{a} libcroco3{a} libelf1{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libncurses6{a} libpipeline1{a} libsigsegv2{a} libtext-unidecode-perl{a} libtool{a} libuchardet0{a} libxml-libxml-perl{a} libxml-namespacesupport-perl{a} libxml-sax-base-perl{a} libxml-sax-perl{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} tex-common{a} texinfo{a} ucf{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libglib2.0-data libgpm2 libltdl-dev libmail-sendmail-perl libwww-perl libxml-sax-expat-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 41 newly installed, 0 to remove and 0 not upgraded. Need to get 21.5 MB of archives. After unpacking 81.9 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main i386 libbsd0 i386 0.9.1-2 [104 kB] Get: 2 http://deb.debian.org/debian buster/main i386 bsdmainutils i386 11.1.2+b1 [193 kB] Get: 3 http://deb.debian.org/debian buster/main i386 libuchardet0 i386 0.0.6-3 [65.2 kB] Get: 4 http://deb.debian.org/debian buster/main i386 groff-base i386 1.22.4-3 [935 kB] Get: 5 http://deb.debian.org/debian buster/main i386 libpipeline1 i386 1.5.1-2 [33.3 kB] Get: 6 http://deb.debian.org/debian buster/main i386 man-db i386 2.8.5-2 [1284 kB] Get: 7 http://deb.debian.org/debian buster/main i386 sensible-utils all 0.0.12 [15.8 kB] Get: 8 http://deb.debian.org/debian buster/main i386 ucf all 3.0038+nmu1 [69.0 kB] Get: 9 http://deb.debian.org/debian buster/main i386 tex-common all 6.11 [53.1 kB] Get: 10 http://deb.debian.org/debian buster/main i386 libmagic-mgc i386 1:5.35-4+deb10u1 [242 kB] Get: 11 http://deb.debian.org/debian buster/main i386 libmagic1 i386 1:5.35-4+deb10u1 [124 kB] Get: 12 http://deb.debian.org/debian buster/main i386 file i386 1:5.35-4+deb10u1 [66.3 kB] Get: 13 http://deb.debian.org/debian buster/main i386 gettext-base i386 0.19.8.1-9 [124 kB] Get: 14 http://deb.debian.org/debian buster/main i386 libsigsegv2 i386 2.12-2 [33.2 kB] Get: 15 http://deb.debian.org/debian buster/main i386 m4 i386 1.4.18-2 [205 kB] Get: 16 http://deb.debian.org/debian buster/main i386 autoconf all 2.69-11 [341 kB] Get: 17 http://deb.debian.org/debian buster/main i386 autotools-dev all 20180224.1 [77.0 kB] Get: 18 http://deb.debian.org/debian buster/main i386 automake all 1:1.16.1-4 [771 kB] Get: 19 http://deb.debian.org/debian buster/main i386 autopoint all 0.19.8.1-9 [434 kB] Get: 20 http://deb.debian.org/debian buster/main i386 libtool all 2.4.6-9 [547 kB] Get: 21 http://deb.debian.org/debian buster/main i386 dh-autoreconf all 19 [16.9 kB] Get: 22 http://deb.debian.org/debian buster/main i386 libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 23 http://deb.debian.org/debian buster/main i386 libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 24 http://deb.debian.org/debian buster/main i386 dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 25 http://deb.debian.org/debian buster/main i386 libelf1 i386 0.176-1.1 [166 kB] Get: 26 http://deb.debian.org/debian buster/main i386 dwz i386 0.12-3 [81.4 kB] Get: 27 http://deb.debian.org/debian buster/main i386 libglib2.0-0 i386 2.58.3-2+deb10u2 [1334 kB] Get: 28 http://deb.debian.org/debian buster/main i386 libicu63 i386 63.1-6 [8443 kB] Get: 29 http://deb.debian.org/debian buster/main i386 libxml2 i386 2.9.4+dfsg1-7+b3 [721 kB] Get: 30 http://deb.debian.org/debian buster/main i386 libcroco3 i386 0.6.12-3 [151 kB] Get: 31 http://deb.debian.org/debian buster/main i386 libncurses6 i386 6.1+20181013-2+deb10u2 [109 kB] Get: 32 http://deb.debian.org/debian buster/main i386 gettext i386 0.19.8.1-9 [1314 kB] Get: 33 http://deb.debian.org/debian buster/main i386 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 34 http://deb.debian.org/debian buster/main i386 po-debconf all 1.0.21 [248 kB] Get: 35 http://deb.debian.org/debian buster/main i386 debhelper all 12.1.1 [1016 kB] Get: 36 http://deb.debian.org/debian buster/main i386 libtext-unidecode-perl all 1.30-1 [103 kB] Get: 37 http://deb.debian.org/debian buster/main i386 libxml-namespacesupport-perl all 1.12-1 [14.8 kB] Get: 38 http://deb.debian.org/debian buster/main i386 libxml-sax-base-perl all 1.09-1 [20.4 kB] Get: 39 http://deb.debian.org/debian buster/main i386 libxml-sax-perl all 1.00+dfsg-1 [58.6 kB] Get: 40 http://deb.debian.org/debian buster/main i386 libxml-libxml-perl i386 2.0134+dfsg-1 [362 kB] Get: 41 http://deb.debian.org/debian buster/main i386 texinfo i386 6.5.0.dfsg.1-4+b1 [1425 kB] Fetched 21.5 MB in 3s (7546 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:i386. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19231 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_i386.deb ... Unpacking libbsd0:i386 (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_i386.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../02-libuchardet0_0.0.6-3_i386.deb ... Unpacking libuchardet0:i386 (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_i386.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../04-libpipeline1_1.5.1-2_i386.deb ... Unpacking libpipeline1:i386 (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_i386.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../06-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package ucf. Preparing to unpack .../07-ucf_3.0038+nmu1_all.deb ... Moving old data out of the way Unpacking ucf (3.0038+nmu1) ... Selecting previously unselected package tex-common. Preparing to unpack .../08-tex-common_6.11_all.deb ... Unpacking tex-common (6.11) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../09-libmagic-mgc_1%3a5.35-4+deb10u1_i386.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:i386. Preparing to unpack .../10-libmagic1_1%3a5.35-4+deb10u1_i386.deb ... Unpacking libmagic1:i386 (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../11-file_1%3a5.35-4+deb10u1_i386.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../12-gettext-base_0.19.8.1-9_i386.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:i386. Preparing to unpack .../13-libsigsegv2_2.12-2_i386.deb ... Unpacking libsigsegv2:i386 (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../14-m4_1.4.18-2_i386.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../15-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../16-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../17-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../18-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../19-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../20-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../21-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../22-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../23-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:i386. Preparing to unpack .../24-libelf1_0.176-1.1_i386.deb ... Unpacking libelf1:i386 (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../25-dwz_0.12-3_i386.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:i386. Preparing to unpack .../26-libglib2.0-0_2.58.3-2+deb10u2_i386.deb ... Unpacking libglib2.0-0:i386 (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:i386. Preparing to unpack .../27-libicu63_63.1-6_i386.deb ... Unpacking libicu63:i386 (63.1-6) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../28-libxml2_2.9.4+dfsg1-7+b3_i386.deb ... Unpacking libxml2:i386 (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:i386. Preparing to unpack .../29-libcroco3_0.6.12-3_i386.deb ... Unpacking libcroco3:i386 (0.6.12-3) ... Selecting previously unselected package libncurses6:i386. Preparing to unpack .../30-libncurses6_6.1+20181013-2+deb10u2_i386.deb ... Unpacking libncurses6:i386 (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../31-gettext_0.19.8.1-9_i386.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../32-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../33-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../34-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package libtext-unidecode-perl. Preparing to unpack .../35-libtext-unidecode-perl_1.30-1_all.deb ... Unpacking libtext-unidecode-perl (1.30-1) ... Selecting previously unselected package libxml-namespacesupport-perl. Preparing to unpack .../36-libxml-namespacesupport-perl_1.12-1_all.deb ... Unpacking libxml-namespacesupport-perl (1.12-1) ... Selecting previously unselected package libxml-sax-base-perl. Preparing to unpack .../37-libxml-sax-base-perl_1.09-1_all.deb ... Unpacking libxml-sax-base-perl (1.09-1) ... Selecting previously unselected package libxml-sax-perl. Preparing to unpack .../38-libxml-sax-perl_1.00+dfsg-1_all.deb ... Unpacking libxml-sax-perl (1.00+dfsg-1) ... Selecting previously unselected package libxml-libxml-perl. Preparing to unpack .../39-libxml-libxml-perl_2.0134+dfsg-1_i386.deb ... Unpacking libxml-libxml-perl (2.0134+dfsg-1) ... Selecting previously unselected package texinfo. Preparing to unpack .../40-texinfo_6.5.0.dfsg.1-4+b1_i386.deb ... Unpacking texinfo (6.5.0.dfsg.1-4+b1) ... Setting up libpipeline1:i386 (1.5.1-2) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:i386 (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libmagic1:i386 (1:5.35-4+deb10u1) ... Setting up libxml-namespacesupport-perl (1.12-1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libicu63:i386 (63.1-6) ... Setting up libxml-sax-base-perl (1.09-1) ... Setting up autotools-dev (20180224.1) ... Setting up libncurses6:i386 (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:i386 (2.12-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:i386 (0.0.6-3) ... Setting up libtext-unidecode-perl (1.30-1) ... Setting up libbsd0:i386 (0.9.1-2) ... Setting up libelf1:i386 (0.176-1.1) ... Setting up libxml2:i386 (2.9.4+dfsg1-7+b3) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libtool (2.4.6-9) ... Setting up m4 (1.4.18-2) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:i386 (0.6.12-3) ... Setting up ucf (3.0038+nmu1) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up gettext (0.19.8.1-9) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up libxml-sax-perl (1.00+dfsg-1) ... update-perl-sax-parsers: Registering Perl SAX parser XML::SAX::PurePerl with priority 10... update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... Creating config file /etc/perl/XML/SAX/ParserDetails.ini with new version Setting up intltool-debian (0.35.0+20060710.5) ... Setting up tex-common (6.11) ... update-language: texlive-base not installed and configured, doing nothing! Setting up libxml-libxml-perl (2.0134+dfsg-1) ... update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX::Parser with priority 50... update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX with priority 50... update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... Replacing config file /etc/perl/XML/SAX/ParserDetails.ini with new version Setting up po-debconf (1.0.21) ... Setting up texinfo (6.5.0.dfsg.1-4+b1) ... Setting up dh-autoreconf (19) ... Setting up debhelper (12.1.1) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/ssed-3.62/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package ssed dpkg-buildpackage: info: source version 3.62-7 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jose Antonio Quevedo dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 fakeroot debian/rules clean dh_testdir dh_testroot rm -f build-stamp configure-stamp # Add here commands to clean up after the build process. rm -f config.guess config/config.guess config.sub config/config.sub [ ! -f Makefile ] || /usr/bin/make distclean dh_clean rm -f debian/debhelper-build-stamp rm -rf debian/.debhelper/ dh_clean: Compatibility levels before 9 are deprecated (level 7 in use) rm -f -- debian/ssed.substvars debian/files rm -fr -- debian/ssed/ debian/tmp/ find . \( \( \ \( -path .\*/.git -o -path .\*/.svn -o -path .\*/.bzr -o -path .\*/.hg -o -path .\*/CVS -o -path .\*/.pc -o -path .\*/_darcs \) -prune -o -type f -a \ \( -name '#*#' -o -name '.*~' -o -name '*~' -o -name DEADJOE \ -o -name '*.orig' -o -name '*.rej' -o -name '*.bak' \ -o -name '.*.orig' -o -name .*.rej -o -name '.SUMS' \ -o -name TAGS -o \( -path '*/.deps/*' -a -name '*.P' \) \ \) -exec rm -f {} + \) -o \ \( -type d -a -name autom4te.cache -prune -exec rm -rf {} + \) \) debian/rules build dh_testdir cp -f /usr/share/misc/config.guess /usr/share/misc/config.sub . cp -f /usr/share/misc/config.guess /usr/share/misc/config.sub config ./configure --prefix=/usr --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --program-prefix=s \ CFLAGS="-g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security" CPPFLAGS="-Wdate-time -D_FORTIFY_SOURCE=2" CXXFLAGS="-g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security" FCFLAGS="-g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong" FFLAGS="-g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong" GCJFLAGS="-g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong" LDFLAGS="-Wl,-z,relro" OBJCFLAGS="-g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security" OBJCXXFLAGS="-g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security" checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for ranlib... ranlib checking how to run the C preprocessor... gcc -E checking for egrep... grep -E checking for AIX... no checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking for library containing strerror... none required checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... 64 checking for _LARGE_FILES value needed for large files... no checking for long file names... yes checking whether -lcP is needed... no checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for io.h... no checking for limits.h... yes checking for locale.h... yes checking for stdarg.h... yes checking for alloca.h... yes checking for stddef.h... yes checking for errno.h... yes checking for wchar.h... yes checking for wctype.h... yes checking for sys/file.h... yes checking for an ANSI C-conforming const... yes checking for size_t... yes checking for ssize_t... yes checking for stdbool.h that conforms to C99... yes checking for _Bool... yes checking for working alloca.h... yes checking for alloca... yes checking for vprintf... yes checking for _doprnt... no checking for getline... yes checking for working getline function... yes checking for obstacks... yes checking whether mbrtowc and mbstate_t are properly declared... yes checking for mbstate_t... yes checking for strverscmp... yes checking for memchr... yes checking for memcmp... yes checking for memmove... yes checking for strerror... yes checking for snprintf... yes checking for mkstemp... yes checking for isatty... yes checking for bcopy... yes checking for bzero... yes checking for isascii... yes checking for memcpy... yes checking for memset... yes checking for strchr... yes checking for strtoul... yes checking for popen... yes checking for pathconf... yes checking for isblank... yes checking for fchown... yes checking for fchmod... yes checking for setlocale... yes checking for wcrtomb... yes checking for wcscoll... yes checking for btowc... yes checking how to build HTML documentation... with makeinfo checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for inline... inline checking for off_t... yes checking for stdlib.h... (cached) yes checking for unistd.h... (cached) yes checking for getpagesize... yes checking for working mmap... yes checking whether we are using the GNU C Library 2.1 or newer... yes checking for ld used by GCC... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking for iconv... yes checking argz.h usability... yes checking argz.h presence... yes checking for argz.h... yes checking for limits.h... (cached) yes checking for locale.h... (cached) yes checking nl_types.h usability... yes checking nl_types.h presence... yes checking for nl_types.h... yes checking malloc.h usability... yes checking malloc.h presence... yes checking for malloc.h... yes checking for stddef.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for unistd.h... (cached) yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking for feof_unlocked... yes checking for fgets_unlocked... yes checking for getc_unlocked... yes checking for getcwd... yes checking for getegid... yes checking for geteuid... yes checking for getgid... yes checking for getuid... yes checking for mempcpy... yes checking for munmap... yes checking for putenv... yes checking for setenv... yes checking for setlocale... (cached) yes checking for stpcpy... yes checking for strcasecmp... yes checking for strdup... yes checking for strtoul... (cached) yes checking for tsearch... yes checking for __argz_count... yes checking for __argz_stringify... yes checking for __argz_next... yes checking for iconv declaration... extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); checking for nl_langinfo and CODESET... yes checking for LC_MESSAGES... yes checking for bison... no checking whether NLS is requested... yes checking whether included gettext is requested... no checking for GNU gettext in libc... yes configure: creating ./config.status config.status: creating bootstrap.sh config.status: creating Makefile config.status: creating doc/Makefile config.status: creating lib/Makefile config.status: creating sed/Makefile config.status: creating testsuite/Makefile config.status: creating po/Makefile.in config.status: creating intl/Makefile config.status: creating pcre/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing default-1 commands config.status: creating po/POTFILES config.status: creating po/Makefile config.status: executing gettext-fix commands touch configure-stamp dh_testdir /usr/bin/make make[1]: Entering directory '/build/ssed-3.62' /usr/bin/make all-recursive make[2]: Entering directory '/build/ssed-3.62' Making all in intl make[3]: Entering directory '/build/ssed-3.62/intl' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/ssed-3.62/intl' Making all in lib make[3]: Entering directory '/build/ssed-3.62/lib' if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../lib -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT getopt1.o -MD -MP -MF ".deps/getopt1.Tpo" -c -o getopt1.o getopt1.c; \ then mv -f ".deps/getopt1.Tpo" ".deps/getopt1.Po"; else rm -f ".deps/getopt1.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../lib -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT getopt.o -MD -MP -MF ".deps/getopt.Tpo" -c -o getopt.o getopt.c; \ then mv -f ".deps/getopt.Tpo" ".deps/getopt.Po"; else rm -f ".deps/getopt.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../lib -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT utils.o -MD -MP -MF ".deps/utils.Tpo" -c -o utils.o utils.c; \ then mv -f ".deps/utils.Tpo" ".deps/utils.Po"; else rm -f ".deps/utils.Tpo"; exit 1; fi utils.c: In function 'panic': utils.c:96:4: warning: implicit declaration of function 'unlink'; did you mean 'unix'? [-Wimplicit-function-declaration] unlink (open_files->name); ^~~~~~ unix rm -f libsed.a ar cru libsed.a getopt1.o getopt.o utils.o ar: `u' modifier ignored since `D' is the default (see `U') ranlib libsed.a make[3]: Leaving directory '/build/ssed-3.62/lib' Making all in pcre make[3]: Entering directory '/build/ssed-3.62/pcre' if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT regtables.o -MD -MP -MF ".deps/regtables.Tpo" -c -o regtables.o regtables.c; \ then mv -f ".deps/regtables.Tpo" ".deps/regtables.Po"; else rm -f ".deps/regtables.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT regsub.o -MD -MP -MF ".deps/regsub.Tpo" -c -o regsub.o regsub.c; \ then mv -f ".deps/regsub.Tpo" ".deps/regsub.Po"; else rm -f ".deps/regsub.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT regstudy.o -MD -MP -MF ".deps/regstudy.Tpo" -c -o regstudy.o regstudy.c; \ then mv -f ".deps/regstudy.Tpo" ".deps/regstudy.Po"; else rm -f ".deps/regstudy.Tpo"; exit 1; fi regstudy.c: In function 'prune_backtracking_paths': regstudy.c:1233:18: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] uschar *code = re->code; ^~ if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT regposix.o -MD -MP -MF ".deps/regposix.Tpo" -c -o regposix.o regposix.c; \ then mv -f ".deps/regposix.Tpo" ".deps/regposix.Po"; else rm -f ".deps/regposix.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT regperl.o -MD -MP -MF ".deps/regperl.Tpo" -c -o regperl.o regperl.c; \ then mv -f ".deps/regperl.Tpo" ".deps/regperl.Po"; else rm -f ".deps/regperl.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT reginfo.o -MD -MP -MF ".deps/reginfo.Tpo" -c -o reginfo.o reginfo.c; \ then mv -f ".deps/reginfo.Tpo" ".deps/reginfo.Po"; else rm -f ".deps/reginfo.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT regexec.o -MD -MP -MF ".deps/regexec.Tpo" -c -o regexec.o regexec.c; \ then mv -f ".deps/regexec.Tpo" ".deps/regexec.Po"; else rm -f ".deps/regexec.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT regexp.o -MD -MP -MF ".deps/regexp.Tpo" -c -o regexp.o regexp.c; \ then mv -f ".deps/regexp.Tpo" ".deps/regexp.Po"; else rm -f ".deps/regexp.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT regdebug.o -MD -MP -MF ".deps/regdebug.Tpo" -c -o regdebug.o regdebug.c; \ then mv -f ".deps/regdebug.Tpo" ".deps/regdebug.Po"; else rm -f ".deps/regdebug.Tpo"; exit 1; fi rm -f libpcre.a ar cru libpcre.a regtables.o regsub.o regstudy.o regposix.o regperl.o reginfo.o regexec.o regexp.o regdebug.o ar: `u' modifier ignored since `D' is the default (see `U') ranlib libpcre.a make[3]: Leaving directory '/build/ssed-3.62/pcre' Making all in po make[3]: Entering directory '/build/ssed-3.62/po' rm -f de.gmo && /usr/bin/msgfmt -c --statistics -o de.gmo de.po de.po:6: warning: header field 'Language' missing in header 20 translated messages, 37 fuzzy translations, 52 untranslated messages. make[3]: Leaving directory '/build/ssed-3.62/po' Making all in sed make[3]: Entering directory '/build/ssed-3.62/sed' if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../lib -I../intl -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT sed.o -MD -MP -MF ".deps/sed.Tpo" -c -o sed.o sed.c; \ then mv -f ".deps/sed.Tpo" ".deps/sed.Po"; else rm -f ".deps/sed.Tpo"; exit 1; fi sed.c: In function 'main': sed.c:178:3: warning: implicit declaration of function 'initialize_mbcs'; did you mean 'initialize_main'? [-Wimplicit-function-declaration] initialize_mbcs (); ^~~~~~~~~~~~~~~ initialize_main if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../lib -I../intl -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT compile.o -MD -MP -MF ".deps/compile.Tpo" -c -o compile.o compile.c; \ then mv -f ".deps/compile.Tpo" ".deps/compile.Po"; else rm -f ".deps/compile.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../lib -I../intl -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT execute.o -MD -MP -MF ".deps/execute.Tpo" -c -o execute.o execute.c; \ then mv -f ".deps/execute.Tpo" ".deps/execute.Po"; else rm -f ".deps/execute.Tpo"; exit 1; fi execute.c: In function 'open_next_file': execute.c:693:9: warning: ignoring return value of 'fchown', declared with attribute warn_unused_result [-Wunused-result] fchown (output_fd, -1, st.st_gid); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../lib -I../intl -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT regexp.o -MD -MP -MF ".deps/regexp.Tpo" -c -o regexp.o regexp.c; \ then mv -f ".deps/regexp.Tpo" ".deps/regexp.Po"; else rm -f ".deps/regexp.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../lib -I../intl -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT fmt.o -MD -MP -MF ".deps/fmt.Tpo" -c -o fmt.o fmt.c; \ then mv -f ".deps/fmt.Tpo" ".deps/fmt.Po"; else rm -f ".deps/fmt.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../lib -I../intl -I../pcre -I.. -I../lib -I../intl -DLOCALEDIR=\"/usr/share/locale\" -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT mbcs.o -MD -MP -MF ".deps/mbcs.Tpo" -c -o mbcs.o mbcs.c; \ then mv -f ".deps/mbcs.Tpo" ".deps/mbcs.Po"; else rm -f ".deps/mbcs.Tpo"; exit 1; fi gcc -g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -o sed sed.o compile.o execute.o regexp.o fmt.o mbcs.o ../pcre/libpcre.a ../lib/libsed.a make[3]: Leaving directory '/build/ssed-3.62/sed' Making all in doc make[3]: Entering directory '/build/ssed-3.62/doc' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/ssed-3.62/doc' Making all in testsuite make[3]: Entering directory '/build/ssed-3.62/testsuite' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/ssed-3.62/testsuite' make[3]: Entering directory '/build/ssed-3.62' make[3]: Leaving directory '/build/ssed-3.62' make[2]: Leaving directory '/build/ssed-3.62' make[1]: Leaving directory '/build/ssed-3.62' /usr/bin/make check make[1]: Entering directory '/build/ssed-3.62' Making check in intl make[2]: Entering directory '/build/ssed-3.62/intl' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/ssed-3.62/intl' Making check in lib make[2]: Entering directory '/build/ssed-3.62/lib' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/ssed-3.62/lib' Making check in pcre make[2]: Entering directory '/build/ssed-3.62/pcre' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/ssed-3.62/pcre' Making check in po make[2]: Entering directory '/build/ssed-3.62/po' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/ssed-3.62/po' Making check in sed make[2]: Entering directory '/build/ssed-3.62/sed' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/ssed-3.62/sed' Making check in doc make[2]: Entering directory '/build/ssed-3.62/doc' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/ssed-3.62/doc' Making check in testsuite make[2]: Entering directory '/build/ssed-3.62/testsuite' /usr/bin/make pcretest make[3]: Entering directory '/build/ssed-3.62/testsuite' if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../lib -I../pcre -I../intl -I../intl -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -MT pcretest.o -MD -MP -MF ".deps/pcretest.Tpo" -c -o pcretest.o pcretest.c; \ then mv -f ".deps/pcretest.Tpo" ".deps/pcretest.Po"; else rm -f ".deps/pcretest.Tpo"; exit 1; fi pcretest.c: In function 'main': pcretest.c:245:11: warning: implicit declaration of function 'isatty'; did you mean 'iswctype'? [-Wimplicit-function-declaration] if (isatty (fileno (infile))) ^~~~~~ iswctype gcc -g -O2 -ffile-prefix-map=/build/ssed-3.62=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -o pcretest pcretest.o ../pcre/libpcre.a ../lib/libsed.a make[3]: Leaving directory '/build/ssed-3.62/testsuite' /usr/bin/make check-TESTS make[3]: Entering directory '/build/ssed-3.62/testsuite' PASS: pcretest PASS: space PASS: appquit PASS: enable PASS: sep PASS: inclib PASS: 8bit PASS: newjis PASS: xabcx PASS: dollar PASS: noeol PASS: noeolw PASS: numsub PASS: numsub2 PASS: numsub3 PASS: numsub4 PASS: numsub5 PASS: 0range PASS: bkslashes PASS: head PASS: madding PASS: mac-mf PASS: empty PASS: xbxcx PASS: xbxcx3 PASS: recall PASS: recall2 PASS: xemacs PASS: fasts PASS: uniq PASS: manis PASS: khadafy PASS: linecnt PASS: eval PASS: distrib PASS: 8to7 PASS: allsub PASS: cv-vars PASS: classes PASS: middle PASS: bsd PASS: stdin PASS: flipcase PASS: insens PASS: subwrite PASS: writeout PASS: readin PASS: help PASS: version PASS: file PASS: quiet PASS: factor PASS: binary3 PASS: binary2 PASS: binary PASS: dc =================== All 56 tests passed =================== make[3]: Leaving directory '/build/ssed-3.62/testsuite' make[2]: Leaving directory '/build/ssed-3.62/testsuite' make[2]: Entering directory '/build/ssed-3.62' make[2]: Leaving directory '/build/ssed-3.62' make[1]: Leaving directory '/build/ssed-3.62' touch build-stamp fakeroot debian/rules binary dh_testdir dh_testroot dh_prep rm -f -- debian/ssed.substvars rm -fr -- debian/.debhelper/generated/ssed/ debian/ssed/ debian/tmp/ dh_installdirs dh_installdirs: Compatibility levels before 9 are deprecated (level 7 in use) install -d debian/ssed install -d debian/ssed/usr/bin debian/ssed/usr/share /usr/bin/make install DESTDIR=/build/ssed-3.62/debian/ssed make[1]: Entering directory '/build/ssed-3.62' Making install in intl make[2]: Entering directory '/build/ssed-3.62/intl' if test "ssed" = "gettext" \ && test '' = 'intl-compat.o'; then \ mkdir -p -- /build/ssed-3.62/debian/ssed/usr/lib /build/ssed-3.62/debian/ssed/usr/include; \ /usr/bin/install -c -m 644 libintl.h /build/ssed-3.62/debian/ssed/usr/include/libintl.h; \ @LIBTOOL@ --mode=install \ /usr/bin/install -c -m 644 libintl.a /build/ssed-3.62/debian/ssed/usr/lib/libintl.a; \ else \ : ; \ fi if test 'no' = yes; then \ test yes != no || mkdir -p -- /build/ssed-3.62/debian/ssed/usr/lib; \ temp=/build/ssed-3.62/debian/ssed/usr/lib/t-charset.alias; \ dest=/build/ssed-3.62/debian/ssed/usr/lib/charset.alias; \ if test -f /build/ssed-3.62/debian/ssed/usr/lib/charset.alias; then \ orig=/build/ssed-3.62/debian/ssed/usr/lib/charset.alias; \ sed -f ref-add.sed $orig > $temp; \ /usr/bin/install -c -m 644 $temp $dest; \ rm -f $temp; \ else \ if test yes = no; then \ orig=charset.alias; \ sed -f ref-add.sed $orig > $temp; \ /usr/bin/install -c -m 644 $temp $dest; \ rm -f $temp; \ fi; \ fi; \ mkdir -p -- /build/ssed-3.62/debian/ssed/usr/share/locale; \ test -f /build/ssed-3.62/debian/ssed/usr/share/locale/locale.alias \ && orig=/build/ssed-3.62/debian/ssed/usr/share/locale/locale.alias \ || orig=./locale.alias; \ temp=/build/ssed-3.62/debian/ssed/usr/share/locale/t-locale.alias; \ dest=/build/ssed-3.62/debian/ssed/usr/share/locale/locale.alias; \ sed -f ref-add.sed $orig > $temp; \ /usr/bin/install -c -m 644 $temp $dest; \ rm -f $temp; \ else \ : ; \ fi if test "ssed" = "gettext"; then \ mkdir -p -- /build/ssed-3.62/debian/ssed/usr/share/gettext/intl; \ /usr/bin/install -c -m 644 VERSION /build/ssed-3.62/debian/ssed/usr/share/gettext/intl/VERSION; \ /usr/bin/install -c -m 644 ChangeLog.inst /build/ssed-3.62/debian/ssed/usr/share/gettext/intl/ChangeLog; \ dists="COPYING.LIB-2.0 COPYING.LIB-2.1 Makefile.in config.charset locale.alias ref-add.sin ref-del.sin gmo.h gettextP.h hash-string.h plural-exp.h eval-plural.h os2compat.h libgnuintl.h loadinfo.h bindtextdom.c dcgettext.c dgettext.c gettext.c finddomain.c loadmsgcat.c localealias.c textdomain.c l10nflist.c explodename.c dcigettext.c dcngettext.c dngettext.c ngettext.c plural.y plural-exp.c localcharset.c localename.c osdep.c os2compat.c intl-compat.c"; \ for file in $dists; do \ /usr/bin/install -c -m 644 ./$file \ /build/ssed-3.62/debian/ssed/usr/share/gettext/intl/$file; \ done; \ chmod a+x /build/ssed-3.62/debian/ssed/usr/share/gettext/intl/config.charset; \ dists="plural.c"; \ for file in $dists; do \ if test -f $file; then dir=.; else dir=.; fi; \ /usr/bin/install -c -m 644 $dir/$file \ /build/ssed-3.62/debian/ssed/usr/share/gettext/intl/$file; \ done; \ dists="xopen-msg.sed linux-msg.sed po2tbl.sed.in cat-compat.c COPYING.LIB-2 gettext.h libgettext.h plural-eval.c"; \ for file in $dists; do \ rm -f /build/ssed-3.62/debian/ssed/usr/share/gettext/intl/$file; \ done; \ else \ : ; \ fi make[2]: Leaving directory '/build/ssed-3.62/intl' Making install in lib make[2]: Entering directory '/build/ssed-3.62/lib' make[3]: Entering directory '/build/ssed-3.62/lib' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/ssed-3.62/lib' make[2]: Leaving directory '/build/ssed-3.62/lib' Making install in pcre make[2]: Entering directory '/build/ssed-3.62/pcre' make[3]: Entering directory '/build/ssed-3.62/pcre' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/ssed-3.62/pcre' make[2]: Leaving directory '/build/ssed-3.62/pcre' Making install in po make[2]: Entering directory '/build/ssed-3.62/po' mkdir -p -- /build/ssed-3.62/debian/ssed/usr/share installing af.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/af/LC_MESSAGES/ssed.mo installing ca.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/ca/LC_MESSAGES/ssed.mo installing cs.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/cs/LC_MESSAGES/ssed.mo installing da.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/da/LC_MESSAGES/ssed.mo installing de.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/de/LC_MESSAGES/ssed.mo installing el.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/el/LC_MESSAGES/ssed.mo installing eo.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/eo/LC_MESSAGES/ssed.mo installing es.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/es/LC_MESSAGES/ssed.mo installing et.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/et/LC_MESSAGES/ssed.mo installing fi.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/fi/LC_MESSAGES/ssed.mo installing fr.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/fr/LC_MESSAGES/ssed.mo installing ga.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/ga/LC_MESSAGES/ssed.mo installing gl.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/gl/LC_MESSAGES/ssed.mo installing he.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/he/LC_MESSAGES/ssed.mo installing hr.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/hr/LC_MESSAGES/ssed.mo installing hu.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/hu/LC_MESSAGES/ssed.mo installing id.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/id/LC_MESSAGES/ssed.mo installing it.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/it/LC_MESSAGES/ssed.mo installing ja.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/ja/LC_MESSAGES/ssed.mo installing ko.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/ko/LC_MESSAGES/ssed.mo installing nl.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/nl/LC_MESSAGES/ssed.mo installing pl.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/pl/LC_MESSAGES/ssed.mo installing pt_BR.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/pt_BR/LC_MESSAGES/ssed.mo installing ro.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/ro/LC_MESSAGES/ssed.mo installing ru.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/ru/LC_MESSAGES/ssed.mo installing sk.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/sk/LC_MESSAGES/ssed.mo installing sl.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/sl/LC_MESSAGES/ssed.mo installing sr.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/sr/LC_MESSAGES/ssed.mo installing sv.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/sv/LC_MESSAGES/ssed.mo installing tr.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/tr/LC_MESSAGES/ssed.mo installing zh_CN.gmo as /build/ssed-3.62/debian/ssed/usr/share/locale/zh_CN/LC_MESSAGES/ssed.mo if test "ssed" = "gettext"; then \ mkdir -p -- /build/ssed-3.62/debian/ssed/usr/share/gettext/po; \ for file in Makefile.in.in Makevars quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot ; do \ /usr/bin/install -c -m 644 ./$file \ /build/ssed-3.62/debian/ssed/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[2]: Leaving directory '/build/ssed-3.62/po' Making install in sed make[2]: Entering directory '/build/ssed-3.62/sed' make[3]: Entering directory '/build/ssed-3.62/sed' test -z "/usr/bin" || mkdir -p -- "/build/ssed-3.62/debian/ssed/usr/bin" /usr/bin/install -c 'sed' '/build/ssed-3.62/debian/ssed/usr/bin/ssed' make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/ssed-3.62/sed' make[2]: Leaving directory '/build/ssed-3.62/sed' Making install in doc make[2]: Entering directory '/build/ssed-3.62/doc' make[3]: Entering directory '/build/ssed-3.62/doc' make[3]: Nothing to be done for 'install-exec-am'. test -z "" || mkdir -p -- "/build/ssed-3.62/debian/ssed" test -z "/usr/share/info" || mkdir -p -- "/build/ssed-3.62/debian/ssed/usr/share/info" /usr/bin/install -c -m 644 './sed.info' '/build/ssed-3.62/debian/ssed/usr/share/info/sed.info' test -z "/usr/share/man/man1" || mkdir -p -- "/build/ssed-3.62/debian/ssed/usr/share/man/man1" /usr/bin/install -c -m 644 './sed.1' '/build/ssed-3.62/debian/ssed/usr/share/man/man1/ssed.1' make[3]: Leaving directory '/build/ssed-3.62/doc' make[2]: Leaving directory '/build/ssed-3.62/doc' Making install in testsuite make[2]: Entering directory '/build/ssed-3.62/testsuite' make[3]: Entering directory '/build/ssed-3.62/testsuite' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/ssed-3.62/testsuite' make[2]: Leaving directory '/build/ssed-3.62/testsuite' make[2]: Entering directory '/build/ssed-3.62' make[3]: Entering directory '/build/ssed-3.62' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/ssed-3.62' make[2]: Leaving directory '/build/ssed-3.62' make[1]: Leaving directory '/build/ssed-3.62' dh_testdir dh_testroot dh_installdocs dh_installdocs: Compatibility levels before 9 are deprecated (level 7 in use) install -d debian/ssed/usr/share/doc/ssed install -d debian/.debhelper/generated/ssed cp --reflink=auto -a ./BUGS debian/ssed/usr/share/doc/ssed cp --reflink=auto -a ./NEWS debian/ssed/usr/share/doc/ssed cp --reflink=auto -a ./README debian/ssed/usr/share/doc/ssed cp --reflink=auto -a ./AUTHORS debian/ssed/usr/share/doc/ssed cp --reflink=auto -a ./TODO debian/ssed/usr/share/doc/ssed chown -R 0:0 debian/ssed/usr/share/doc chmod -R u\+rw,go=rX debian/ssed/usr/share/doc install -p -m0644 debian/README.Debian debian/ssed/usr/share/doc/ssed/README.Debian install -p -m0644 debian/copyright debian/ssed/usr/share/doc/ssed/copyright dh_installexamples dh_installexamples: Compatibility levels before 9 are deprecated (level 7 in use) dh_installman dh_installman: Compatibility levels before 9 are deprecated (level 7 in use) man -l --recode UTF-8 ./debian/ssed/usr/share/man/man1/ssed.1 > debian/ssed/usr/share/man/man1/ssed.1.dh-new mv debian/ssed/usr/share/man/man1/ssed.1.dh-new debian/ssed/usr/share/man/man1/ssed.1 chmod 0644 -- debian/ssed/usr/share/man/man1/ssed.1 # Adjust info files to say ssed instead of sed set -e; cd /build/ssed-3.62/debian/ssed/usr/share/info; \ for f in *; do \ sed -e 's/^\* sed: (sed)/\* ssed: (ssed)/' \ -e 's/sed.info/ssed.info/' $f > s$f; \ rm $f; \ done; \ rm -f sdir dh_installchangelogs ChangeLog install -p -m0644 debian/changelog debian/ssed/usr/share/doc/ssed/changelog.Debian install -p -m0644 ChangeLog debian/ssed/usr/share/doc/ssed/changelog dh_strip dh_strip: Compatibility levels before 9 are deprecated (level 7 in use) install -d debian/.debhelper/ssed/dbgsym-root/usr/lib/debug/.build-id/0b objcopy --only-keep-debug --compress-debug-sections debian/ssed/usr/bin/ssed debian/.debhelper/ssed/dbgsym-root/usr/lib/debug/.build-id/0b/2838c6f503ee87a6418c2e4e13001ae74d07b3.debug chmod 0644 -- debian/.debhelper/ssed/dbgsym-root/usr/lib/debug/.build-id/0b/2838c6f503ee87a6418c2e4e13001ae74d07b3.debug chown 0:0 -- debian/.debhelper/ssed/dbgsym-root/usr/lib/debug/.build-id/0b/2838c6f503ee87a6418c2e4e13001ae74d07b3.debug strip --remove-section=.comment --remove-section=.note debian/ssed/usr/bin/ssed objcopy --add-gnu-debuglink debian/.debhelper/ssed/dbgsym-root/usr/lib/debug/.build-id/0b/2838c6f503ee87a6418c2e4e13001ae74d07b3.debug debian/ssed/usr/bin/ssed install -d debian/.debhelper/ssed/dbgsym-root/usr/share/doc ln -s ssed debian/.debhelper/ssed/dbgsym-root/usr/share/doc/ssed-dbgsym dh_compress dh_compress: Compatibility levels before 9 are deprecated (level 7 in use) cd debian/ssed chmod a-x usr/share/doc/ssed/BUGS usr/share/doc/ssed/NEWS usr/share/doc/ssed/changelog usr/share/doc/ssed/changelog.Debian usr/share/info/ssed.info usr/share/man/man1/ssed.1 gzip -9nf usr/share/doc/ssed/BUGS usr/share/doc/ssed/NEWS usr/share/doc/ssed/changelog usr/share/doc/ssed/changelog.Debian usr/share/info/ssed.info usr/share/man/man1/ssed.1 cd '/build/ssed-3.62' dh_fixperms find debian/ssed -true -print0 2>/dev/null | xargs -0r chown --no-dereference 0:0 find debian/ssed ! -type l -a -true -a -true -print0 2>/dev/null | xargs -0r chmod go=rX,u+rw,a-s find debian/ssed/usr/share/doc -type f -a -true -a ! -regex 'debian/ssed/usr/share/doc/[^/]*/examples/.*' -print0 2>/dev/null | xargs -0r chmod 0644 find debian/ssed/usr/share/doc -type d -a -true -a -true -print0 2>/dev/null | xargs -0r chmod 0755 find debian/ssed/usr/share/man -type f -a -true -a -true -print0 2>/dev/null | xargs -0r chmod 0644 find debian/ssed -type f \( -name '*.so.*' -o -name '*.so' -o -name '*.la' -o -name '*.a' -o -name '*.js' -o -name '*.css' -o -name '*.scss' -o -name '*.sass' -o -name '*.jpeg' -o -name '*.jpg' -o -name '*.png' -o -name '*.gif' -o -name '*.cmxs' -o -name '*.node' \) -a -true -a -true -print0 2>/dev/null | xargs -0r chmod 0644 find debian/ssed/usr/bin -type f -a -true -a -true -print0 2>/dev/null | xargs -0r chmod a+x dh_installdeb dh_installdeb: Compatibility levels before 9 are deprecated (level 7 in use) install -d debian/ssed/DEBIAN dh_shlibdeps dh_shlibdeps: Compatibility levels before 9 are deprecated (level 7 in use) dpkg-shlibdeps -Tdebian/ssed.substvars debian/ssed/usr/bin/ssed dh_gencontrol echo misc:Depends= >> debian/ssed.substvars echo misc:Pre-Depends= >> debian/ssed.substvars install -d debian/.debhelper/ssed/dbgsym-root/DEBIAN dpkg-gencontrol -pssed -ldebian/changelog -Tdebian/ssed.substvars -Pdebian/.debhelper/ssed/dbgsym-root -UPre-Depends -URecommends -USuggests -UEnhances -UProvides -UEssential -UConflicts -DPriority=optional -UHomepage -UImportant -DAuto-Built-Package=debug-symbols -DPackage=ssed-dbgsym "-DDepends=ssed (= \${binary:Version})" "-DDescription=debug symbols for ssed" -DBuild-Ids=0b2838c6f503ee87a6418c2e4e13001ae74d07b3 -DSection=debug -UMulti-Arch -UReplaces -UBreaks chmod 0644 -- debian/.debhelper/ssed/dbgsym-root/DEBIAN/control chown 0:0 -- debian/.debhelper/ssed/dbgsym-root/DEBIAN/control dpkg-gencontrol -pssed -ldebian/changelog -Tdebian/ssed.substvars -Pdebian/ssed -UMulti-Arch chmod 0644 -- debian/ssed/DEBIAN/control chown 0:0 -- debian/ssed/DEBIAN/control dh_md5sums cd debian/ssed >/dev/null && xargs -r0 md5sum | perl -pe 'if (s@^\\@@) { s/\\\\/\\/g; }' > DEBIAN/md5sums chmod 0644 -- debian/ssed/DEBIAN/md5sums chown 0:0 -- debian/ssed/DEBIAN/md5sums cd debian/.debhelper/ssed/dbgsym-root >/dev/null && xargs -r0 md5sum | perl -pe 'if (s@^\\@@) { s/\\\\/\\/g; }' > DEBIAN/md5sums chmod 0644 -- debian/.debhelper/ssed/dbgsym-root/DEBIAN/md5sums chown 0:0 -- debian/.debhelper/ssed/dbgsym-root/DEBIAN/md5sums dh_builddeb dpkg-deb --build debian/ssed .. dpkg-deb --build debian/.debhelper/ssed/dbgsym-root .. dpkg-deb: building package 'ssed' in '../ssed_3.62-7_i386.deb'. dpkg-deb: building package 'ssed-dbgsym' in '../ssed-dbgsym_3.62-7_i386.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../ssed_3.62-7_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/6888 and its subdirectories I: Current time: Thu Apr 23 13:35:01 -12 2020 I: pbuilder-time-stamp: 1587692101