I: pbuilder: network access will be disabled during build I: Current time: Thu Sep 18 00:33:04 +14 2025 I: pbuilder-time-stamp: 1758105184 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/forky-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libnet-pcap-perl_0.21-2.dsc] I: copying [./libnet-pcap-perl_0.21.orig.tar.gz] I: copying [./libnet-pcap-perl_0.21-2.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libnet-pcap-perl_0.21-2.dsc: no acceptable signature found dpkg-source: info: extracting libnet-pcap-perl in libnet-pcap-perl-0.21 dpkg-source: info: unpacking libnet-pcap-perl_0.21.orig.tar.gz dpkg-source: info: unpacking libnet-pcap-perl_0.21-2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying auto-gitignore I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/2634491/tmp/hooks/D01_modify_environment starting debug: Running on codethink04-arm64. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash '/bin/sh' -> '/bin/bash' lrwxrwxrwx 1 root root 9 Sep 17 10:33 /bin/sh -> /bin/bash I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/2634491/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/2634491/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:globskipdots:hostcomplete:interactive_comments:patsub_replacement:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_LOADABLES_PATH=/usr/local/lib/bash:/usr/lib/bash:/opt/local/lib/bash:/usr/pkg/lib/bash:/opt/pkg/lib/bash:. BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="3" [2]="3" [3]="1" [4]="release" [5]="aarch64-unknown-linux-gnu") BASH_VERSION='5.3.3(1)-release' BUILDDIR=/build/reproducible-path BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=arm64 DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DIRSTACK=() DISTRIBUTION=forky EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=aarch64 HOST_ARCH=arm64 IFS=' ' INVOCATION_ID=91d487c23d104a45a3527d2ba3e9c645 LANG=C LANGUAGE=nl_BE:nl LC_ALL=C MACHTYPE=aarch64-unknown-linux-gnu MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=2634491 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.UC3jlXWT/pbuilderrc_O6fM --distribution forky --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/forky-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.UC3jlXWT/b2 --logfile b2/build.log libnet-pcap-perl_0.21-2.dsc' SUDO_GID=109 SUDO_HOME=/var/lib/jenkins SUDO_UID=104 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://192.168.101.4:3128 I: uname -a Linux i-capture-the-hostname 6.12.43+deb13-cloud-arm64 #1 SMP Debian 6.12.43-1 (2025-08-27) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Aug 10 12:30 /bin -> usr/bin I: user script /srv/workspace/pbuilder/2634491/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libpcap0.8-dev, libtest-exception-perl, libtest-pod-perl, perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 20020 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libpcap0.8-dev; however: Package libpcap0.8-dev is not installed. pbuilder-satisfydepends-dummy depends on libtest-exception-perl; however: Package libtest-exception-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcap-dev{a} libdbus-1-3{a} libdbus-1-dev{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libmagic-mgc{a} libmagic1t64{a} libpcap0.8-dev{a} libpcap0.8t64{a} libperl-dev{a} libpipeline1{a} libpkgconf3{a} libsub-uplevel-perl{a} libsystemd-dev{a} libtest-exception-perl{a} libtest-pod-perl{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2-16{a} m4{a} man-db{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} sensible-utils{a} sgml-base{a} xml-core{a} The following packages are RECOMMENDED but will NOT be installed: curl dbus libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 44 newly installed, 0 to remove and 0 not upgraded. Need to get 14.8 MB of archives. After unpacking 63.3 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian forky/main arm64 sensible-utils all 0.0.26 [27.0 kB] Get: 2 http://deb.debian.org/debian forky/main arm64 libmagic-mgc arm64 1:5.46-5 [338 kB] Get: 3 http://deb.debian.org/debian forky/main arm64 libmagic1t64 arm64 1:5.46-5 [103 kB] Get: 4 http://deb.debian.org/debian forky/main arm64 file arm64 1:5.46-5 [43.7 kB] Get: 5 http://deb.debian.org/debian forky/main arm64 gettext-base arm64 0.23.1-2+b1 [241 kB] Get: 6 http://deb.debian.org/debian forky/main arm64 libuchardet0 arm64 0.0.8-2 [69.0 kB] Get: 7 http://deb.debian.org/debian forky/main arm64 groff-base arm64 1.23.0-9 [1130 kB] Get: 8 http://deb.debian.org/debian forky/main arm64 bsdextrautils arm64 2.41.1-3 [98.1 kB] Get: 9 http://deb.debian.org/debian forky/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB] Get: 10 http://deb.debian.org/debian forky/main arm64 man-db arm64 2.13.1-1 [1453 kB] Get: 11 http://deb.debian.org/debian forky/main arm64 m4 arm64 1.4.20-1 [316 kB] Get: 12 http://deb.debian.org/debian forky/main arm64 autoconf all 2.72-3.1 [494 kB] Get: 13 http://deb.debian.org/debian forky/main arm64 autotools-dev all 20240727.1 [60.2 kB] Get: 14 http://deb.debian.org/debian forky/main arm64 automake all 1:1.17-4 [862 kB] Get: 15 http://deb.debian.org/debian forky/main arm64 autopoint all 0.23.1-2 [770 kB] Get: 16 http://deb.debian.org/debian forky/main arm64 libdebhelper-perl all 13.26 [91.8 kB] Get: 17 http://deb.debian.org/debian forky/main arm64 libtool all 2.5.4-5 [540 kB] Get: 18 http://deb.debian.org/debian forky/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian forky/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian forky/main arm64 libfile-stripnondeterminism-perl all 1.15.0-1 [19.9 kB] Get: 21 http://deb.debian.org/debian forky/main arm64 dh-strip-nondeterminism all 1.15.0-1 [8812 B] Get: 22 http://deb.debian.org/debian forky/main arm64 libelf1t64 arm64 0.193-3 [189 kB] Get: 23 http://deb.debian.org/debian forky/main arm64 dwz arm64 0.16-2 [100 kB] Get: 24 http://deb.debian.org/debian forky/main arm64 libunistring5 arm64 1.3-2 [453 kB] Get: 25 http://deb.debian.org/debian forky/main arm64 libxml2-16 arm64 2.14.5+dfsg-0.2 [582 kB] Get: 26 http://deb.debian.org/debian forky/main arm64 gettext arm64 0.23.1-2+b1 [1612 kB] Get: 27 http://deb.debian.org/debian forky/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 28 http://deb.debian.org/debian forky/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 29 http://deb.debian.org/debian forky/main arm64 debhelper all 13.26 [939 kB] Get: 30 http://deb.debian.org/debian forky/main arm64 libcap-dev arm64 1:2.75-10+b1 [471 kB] Get: 31 http://deb.debian.org/debian forky/main arm64 libdbus-1-3 arm64 1.16.2-2 [169 kB] Get: 32 http://deb.debian.org/debian forky/main arm64 libsystemd-dev arm64 258~rc4-1 [1362 kB] Get: 33 http://deb.debian.org/debian forky/main arm64 libpkgconf3 arm64 1.8.1-4 [35.3 kB] Get: 34 http://deb.debian.org/debian forky/main arm64 pkgconf-bin arm64 1.8.1-4 [29.6 kB] Get: 35 http://deb.debian.org/debian forky/main arm64 pkgconf arm64 1.8.1-4 [26.1 kB] Get: 36 http://deb.debian.org/debian forky/main arm64 sgml-base all 1.31+nmu1 [10.9 kB] Get: 37 http://deb.debian.org/debian forky/main arm64 xml-core all 0.19 [20.1 kB] Get: 38 http://deb.debian.org/debian forky/main arm64 libdbus-1-dev arm64 1.16.2-2 [216 kB] Get: 39 http://deb.debian.org/debian forky/main arm64 libpcap0.8t64 arm64 1.10.5-2 [160 kB] Get: 40 http://deb.debian.org/debian forky/main arm64 libpcap0.8-dev arm64 1.10.5-2 [274 kB] Get: 41 http://deb.debian.org/debian forky/main arm64 libperl-dev arm64 5.40.1-6 [1019 kB] Get: 42 http://deb.debian.org/debian forky/main arm64 libsub-uplevel-perl all 0.2800-3 [14.0 kB] Get: 43 http://deb.debian.org/debian forky/main arm64 libtest-exception-perl all 0.43-3 [16.9 kB] Get: 44 http://deb.debian.org/debian forky/main arm64 libtest-pod-perl all 1.52-3 [12.6 kB] Fetched 14.8 MB in 0s (130 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20020 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_arm64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:arm64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_arm64.deb ... Unpacking libmagic1t64:arm64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_arm64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2+b1_arm64.deb ... Unpacking gettext-base (0.23.1-2+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.8-2_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.8-2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_arm64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41.1-3_arm64.deb ... Unpacking bsdextrautils (2.41.1-3) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_arm64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.20-1_arm64.deb ... Unpacking m4 (1.4.20-1) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.26_all.deb ... Unpacking libdebhelper-perl (13.26) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-5_all.deb ... Unpacking libtool (2.5.4-5) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.0-1) ... Selecting previously unselected package libelf1t64:arm64. Preparing to unpack .../21-libelf1t64_0.193-3_arm64.deb ... Unpacking libelf1t64:arm64 (0.193-3) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-2_arm64.deb ... Unpacking dwz (0.16-2) ... Selecting previously unselected package libunistring5:arm64. Preparing to unpack .../23-libunistring5_1.3-2_arm64.deb ... Unpacking libunistring5:arm64 (1.3-2) ... Selecting previously unselected package libxml2-16:arm64. Preparing to unpack .../24-libxml2-16_2.14.5+dfsg-0.2_arm64.deb ... Unpacking libxml2-16:arm64 (2.14.5+dfsg-0.2) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.1-2+b1_arm64.deb ... Unpacking gettext (0.23.1-2+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.26_all.deb ... Unpacking debhelper (13.26) ... Selecting previously unselected package libcap-dev:arm64. Preparing to unpack .../29-libcap-dev_1%3a2.75-10+b1_arm64.deb ... Unpacking libcap-dev:arm64 (1:2.75-10+b1) ... Selecting previously unselected package libdbus-1-3:arm64. Preparing to unpack .../30-libdbus-1-3_1.16.2-2_arm64.deb ... Unpacking libdbus-1-3:arm64 (1.16.2-2) ... Selecting previously unselected package libsystemd-dev:arm64. Preparing to unpack .../31-libsystemd-dev_258~rc4-1_arm64.deb ... Unpacking libsystemd-dev:arm64 (258~rc4-1) ... Selecting previously unselected package libpkgconf3:arm64. Preparing to unpack .../32-libpkgconf3_1.8.1-4_arm64.deb ... Unpacking libpkgconf3:arm64 (1.8.1-4) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../33-pkgconf-bin_1.8.1-4_arm64.deb ... Unpacking pkgconf-bin (1.8.1-4) ... Selecting previously unselected package pkgconf:arm64. Preparing to unpack .../34-pkgconf_1.8.1-4_arm64.deb ... Unpacking pkgconf:arm64 (1.8.1-4) ... Selecting previously unselected package sgml-base. Preparing to unpack .../35-sgml-base_1.31+nmu1_all.deb ... Unpacking sgml-base (1.31+nmu1) ... Selecting previously unselected package xml-core. Preparing to unpack .../36-xml-core_0.19_all.deb ... Unpacking xml-core (0.19) ... Selecting previously unselected package libdbus-1-dev:arm64. Preparing to unpack .../37-libdbus-1-dev_1.16.2-2_arm64.deb ... Unpacking libdbus-1-dev:arm64 (1.16.2-2) ... Selecting previously unselected package libpcap0.8t64:arm64. Preparing to unpack .../38-libpcap0.8t64_1.10.5-2_arm64.deb ... Unpacking libpcap0.8t64:arm64 (1.10.5-2) ... Selecting previously unselected package libpcap0.8-dev:arm64. Preparing to unpack .../39-libpcap0.8-dev_1.10.5-2_arm64.deb ... Unpacking libpcap0.8-dev:arm64 (1.10.5-2) ... Selecting previously unselected package libperl-dev:arm64. Preparing to unpack .../40-libperl-dev_5.40.1-6_arm64.deb ... Unpacking libperl-dev:arm64 (5.40.1-6) ... Selecting previously unselected package libsub-uplevel-perl. Preparing to unpack .../41-libsub-uplevel-perl_0.2800-3_all.deb ... Unpacking libsub-uplevel-perl (0.2800-3) ... Selecting previously unselected package libtest-exception-perl. Preparing to unpack .../42-libtest-exception-perl_0.43-3_all.deb ... Unpacking libtest-exception-perl (0.43-3) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../43-libtest-pod-perl_1.52-3_all.deb ... Unpacking libtest-pod-perl (1.52-3) ... Setting up libpipeline1:arm64 (1.5.8-1) ... Setting up bsdextrautils (2.41.1-3) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:arm64 (2.14.5+dfsg-0.2) ... Setting up libdebhelper-perl (13.26) ... Setting up libmagic1t64:arm64 (1:5.46-5) ... Setting up libtest-pod-perl (1.52-3) ... Setting up gettext-base (0.23.1-2+b1) ... Setting up m4 (1.4.20-1) ... Setting up libperl-dev:arm64 (5.40.1-6) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:arm64 (0.193-3) ... Setting up autotools-dev (20240727.1) ... Setting up libpkgconf3:arm64 (1.8.1-4) ... Setting up libdbus-1-3:arm64 (1.16.2-2) ... Setting up libunistring5:arm64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up pkgconf-bin (1.8.1-4) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.16-2) ... Setting up sensible-utils (0.0.26) ... Setting up libuchardet0:arm64 (0.0.8-2) ... Setting up libsub-uplevel-perl (0.2800-3) ... Setting up libpcap0.8t64:arm64 (1.10.5-2) ... Setting up sgml-base (1.31+nmu1) ... Setting up libcap-dev:arm64 (1:2.75-10+b1) ... Setting up libsystemd-dev:arm64 (258~rc4-1) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.0-1) ... Setting up gettext (0.23.1-2+b1) ... Setting up libtool (2.5.4-5) ... Setting up pkgconf:arm64 (1.8.1-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libtest-exception-perl (0.43-3) ... Setting up dh-strip-nondeterminism (1.15.0-1) ... Setting up groff-base (1.23.0-9) ... Setting up xml-core (0.19) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.26) ... Processing triggers for libc-bin (2.41-12) ... Processing triggers for sgml-base (1.31+nmu1) ... Setting up libdbus-1-dev:arm64 (1.16.2-2) ... Setting up libpcap0.8-dev:arm64 (1.10.5-2) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: user script /srv/workspace/pbuilder/2634491/tmp/hooks/A99_set_merged_usr starting Not re-configuring usrmerge for forky I: user script /srv/workspace/pbuilder/2634491/tmp/hooks/A99_set_merged_usr finished hostname: Name or service not known I: Running cd /build/reproducible-path/libnet-pcap-perl-0.21/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../libnet-pcap-perl_0.21-2_source.changes dpkg-buildpackage: info: source package libnet-pcap-perl dpkg-buildpackage: info: source version 0.21-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libnet-pcap-perl-0.21=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libnet-pcap-perl-0.21=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now" looking for -lpcap... yes checking for pcap_lib_version() in -lpcap... yes detecting available functions... ok detecting libpcap version... Running [aarch64-linux-gnu-gcc -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wwrite-strings 'pcap_version.c' -lpcap -o pcap_version.exe] ok (libpcap version 1.10.5 (with TPACKET_V3)) Setting -DPERL_PCAP_VERSION=1010005 Checking if your kit is complete... Warning: the following files are missing in your kit: .gitignore Please inform the author. Generating a Unix-style Makefile Writing Makefile for Net::Pcap Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libnet-pcap-perl-0.21' "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' -typemap '/build/reproducible-path/libnet-pcap-perl-0.21/typemap' Pcap.xs > Pcap.xsc Running Mkbootstrap for Pcap () chmod 644 "Pcap.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Pcap.bs blib/arch/auto/Net/Pcap/Pcap.bs 644 cp Pcap.pm blib/lib/Net/Pcap.pm mv Pcap.xsc Pcap.c aarch64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Wwrite-strings -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libnet-pcap-perl-0.21=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.21\" -DXS_VERSION=\"0.21\" -fPIC "-I/usr/lib/aarch64-linux-gnu/perl/5.40/CORE" -DHAVE_BLANK -DHAVE_PCAP_LIB_VERSION -DHAVE_PCAP_SETSAMPLING -DHAVE_PCAP_BREAKLOOP -DHAVE_PCAP_COMPILE_NOPCAP -DHAVE_PCAP_DATALINK_NAME_TO_VAL -DHAVE_PCAP_DATALINK_VAL_TO_DESCRIPTION -DHAVE_PCAP_DATALINK_VAL_TO_NAME -DHAVE_PCAP_DUMP_FILE -DHAVE_PCAP_DUMP_FLUSH -DHAVE_PCAP_FINDALLDEVS -DHAVE_PCAP_GETNONBLOCK -DHAVE_PCAP_GET_SELECTABLE_FD -DHAVE_PCAP_LIB_VERSION -DHAVE_PCAP_NEXT_EX -DHAVE_PCAP_OFFLINE_FILTER -DHAVE_PCAP_OPEN_DEAD -DHAVE_PCAP_SENDPACKET -DHAVE_PCAP_SETNONBLOCK -DHAVE_PCAP_SET_DATALINK -DPERL_PCAP_VERSION=1010005 Pcap.c In file included from Pcap.xs:43: stubs.inc:187:2: warning: #warning "the function pcap_list_datalinks() is not available" [-Wcpp] 187 | #warning "the function pcap_list_datalinks() is not available" | ^~~~~~~ stubs.inc:322:2: warning: #warning "the function pcap_createsrcstr() is not available" [-Wcpp] 322 | #warning "the function pcap_createsrcstr() is not available" | ^~~~~~~ stubs.inc:337:2: warning: #warning "the function pcap_parsesrcstr() is not available" [-Wcpp] 337 | #warning "the function pcap_parsesrcstr() is not available" | ^~~~~~~ stubs.inc:352:2: warning: #warning "the function pcap_open() is not available" [-Wcpp] 352 | #warning "the function pcap_open() is not available" | ^~~~~~~ stubs.inc:376:2: warning: #warning "the function pcap_setbuff() is not available" [-Wcpp] 376 | #warning "the function pcap_setbuff() is not available" | ^~~~~~~ stubs.inc:391:2: warning: #warning "the function pcap_setuserbuffer() is not available" [-Wcpp] 391 | #warning "the function pcap_setuserbuffer() is not available" | ^~~~~~~ stubs.inc:406:2: warning: #warning "the function pcap_setmode() is not available" [-Wcpp] 406 | #warning "the function pcap_setmode() is not available" | ^~~~~~~ stubs.inc:421:2: warning: #warning "the function pcap_setmintocopy() is not available" [-Wcpp] 421 | #warning "the function pcap_setmintocopy() is not available" | ^~~~~~~ stubs.inc:436:2: warning: #warning "the function pcap_sendqueue_alloc() is not available" [-Wcpp] 436 | #warning "the function pcap_sendqueue_alloc() is not available" | ^~~~~~~ stubs.inc:458:2: warning: #warning "the function pcap_sendqueue_destroy() is not available" [-Wcpp] 458 | #warning "the function pcap_sendqueue_destroy() is not available" | ^~~~~~~ stubs.inc:472:2: warning: #warning "the function pcap_sendqueue_queue() is not available" [-Wcpp] 472 | #warning "the function pcap_sendqueue_queue() is not available" | ^~~~~~~ stubs.inc:487:2: warning: #warning "the function pcap_sendqueue_transmit() is not available" [-Wcpp] 487 | #warning "the function pcap_sendqueue_transmit() is not available" | ^~~~~~~ stubs.inc:502:2: warning: #warning "the function pcap_event() is not available" [-Wcpp] 502 | #warning "the function pcap_event() is not available" | ^~~~~~~ Pcap.xs: In function 'XS_Net__Pcap_lookupdev': Pcap.xs:108:25: warning: 'pcap_lookupdev' is deprecated: use 'pcap_findalldevs' and use the first device [-Wdeprecated-declarations] 108 | RETVAL = pcap_lookupdev(errbuf); | ^~~~~~ In file included from /usr/include/pcap.h:43, from Pcap.xs:32: /usr/include/pcap/pcap.h:444:18: note: declared here 444 | PCAP_API char *pcap_lookupdev(char *); | ^~~~~~~~~~~~~~ Pcap.xs: In function 'XS_Net__Pcap_findalldevs_xs': Pcap.xs:222:21: warning: 'pcap_lookupdev' is deprecated: use 'pcap_findalldevs' and use the first device [-Wdeprecated-declarations] 222 | char *dev = pcap_lookupdev(errbuf); | ^~~~ /usr/include/pcap/pcap.h:444:18: note: declared here 444 | PCAP_API char *pcap_lookupdev(char *); | ^~~~~~~~~~~~~~ Pcap.xs: In function 'XS_Net__Pcap_compile_nopcap': Pcap.xs:601:25: warning: 'pcap_compile_nopcap' is deprecated: use pcap_open_dead(), pcap_compile() and pcap_close() [-Wdeprecated-declarations] 601 | RETVAL = pcap_compile_nopcap(snaplen, linktype, real_fp, str, optimize, mask); | ^~~~~~ /usr/include/pcap/pcap.h:667:17: note: declared here 667 | PCAP_API int pcap_compile_nopcap(int, int, struct bpf_program *, | ^~~~~~~~~~~~~~~~~~~ Pcap.c: In function 'XS_Net__Pcap_strerror': Pcap.c:1729:16: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 1729 | RETVAL = pcap_strerror(error); | ^ Pcap.xs: In function 'XS_Net__Pcap_getevent': Pcap.xs:1038:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1038 | h = (unsigned int) pcap_getevent(p); | ^ rm -f blib/arch/auto/Net/Pcap/Pcap.so aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libnet-pcap-perl-0.21=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Pcap.o -o blib/arch/auto/Net/Pcap/Pcap.so \ -lpcap \ /usr/lib/gcc/aarch64-linux-gnu/15/../../../aarch64-linux-gnu/libpcap.so: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/aarch64-linux-gnu/libc.so.6: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. /lib/ld-linux-aarch64.so.1: warning: GCS is required by -z gcs, but this shared library lacks the necessary property note. The dynamic loader might not enable GCS or refuse to load the program unless all the shared library dependencies have the GCS marking. chmod 755 blib/arch/auto/Net/Pcap/Pcap.so cp bin/pcapinfo blib/script/pcapinfo "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/pcapinfo Manifying 1 pod document Manifying 1 pod document make[1]: Leaving directory '/build/reproducible-path/libnet-pcap-perl-0.21' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libnet-pcap-perl-0.21' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Pcap.bs blib/arch/auto/Net/Pcap/Pcap.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Testing Net::Pcap 0.21 (libpcap version 1.10.5 (with TPACKET_V3)) under Perl 5.040001 t/00-load.t ................ 1..1 ok 1 - use Net::Pcap; ok t/01-api.t ................. 1..3 ok 1 - Net::Pcap->can(...) ok 2 - Net::Pcap->can(...) ok 3 - main->can(...) ok t/02-lookup.t .............. 1..45 ok 1 - calling lookupdev() with no argument ok 2 - calling lookupdev() with incorrect argument type ok 3 - calling findalldevs() with no argument ok 4 - calling findalldevs() with too many arguments ok 5 - calling 1-arg findalldevs() with incorrect argument type ok 6 - calling 1-arg findalldevs() with incorrect argument type ok 7 - calling 2-args findalldevs() with incorrect argument type ok 8 - calling 2-args findalldevs() with incorrect argument type for arg1 ok 9 - calling 2-args findalldevs() with incorrect argument type for arg2 ok 10 - calling 2-args findalldevs() with incorrect argument type for arg2 ok 11 - calling findalldevs_xs() with no argument ok 12 - calling findalldevs_xs() with incorrect argument type for arg1 ok 13 - calling findalldevs_xs() with incorrect argument type for arg2 ok 14 - calling lookupnet() with no argument ok 15 - calling lookupnet() with incorrect argument type for arg2 ok 16 - calling lookupnet() with incorrect argument type for arg3 ok 17 - calling lookupnet() with incorrect argument type for arg4 ok 18 - lookupdev() ok 19 - - $err must be null: ok 20 - - $dev isn't null: 'any' ok 21 - findalldevs() - 1-arg form, legacy from Marco Carnut 0.05 ok 22 - - $err must be null: ok 23 - - at least one device must be present in the list returned by findalldevs() ok 24 - - 'any' must be present in the list returned by findalldevs() ok 25 - findalldevs() - 2-args form, legacy from Jean-Louis Morel 0.04.02 ok 26 - - $err must be null: ok 27 - - at least one device must be present in the list returned by findalldevs() ok 28 - - at least one device must be present in the hash filled by findalldevs() ok 29 - - 'any' must be present in the list returned by findalldevs() ok 30 - - checking pseudo-device description ok 31 - - checking loopback device description ok 32 - findalldevs() - 2-args form, new, correct syntax, consistent with libpcap(3) ok 33 - - $err must be null: ok 34 - - at least one device must be present in the list returned by findalldevs() ok 35 - - at least one device must be present in the hash filled by findalldevs() ok 36 - - 'any' must be present in the list returned by findalldevs() ok 37 - - checking pseudo-device description ok 38 - - checking loopback device description ok 39 - lookupnet() ok 40 - - $err must be null: ok 41 - - $result must be null: 0 ok 42 - - $net isn't null: '0' => 0.0.0.0 ok 43 - - $mask isn't null: '0' => 0.0.0.0 ok 44 - - does $net look like an IP address? ok 45 - - does $mask look like an IP address? ok t/03-openlive.t ............ skipped: must be run as root t/04-loop.t ................ skipped: must be run as root t/05-dump.t ................ skipped: must be run as root t/06-offline.t ............. skipped: must be run as root t/07-stats.t ............... skipped: must be run as root t/08-filter.t .............. 1..29 ok 1 - calling compile_nopcap() with no argument ok 2 - calling compile_nopcap() with incorrect argument type for arg2 ok 3 - compile_nopcap() ok 4 - - result must be null: 0 ok 5 - - $filter is defined ok 6 - ' - $filter' isa 'SCALAR' ok 7 - ' - $filter' isa 'pcap_bpf_program_tPtr' ok 8 # skip must be run as root ok 9 # skip must be run as root ok 10 # skip must be run as root ok 11 # skip must be run as root ok 12 # skip must be run as root ok 13 # skip must be run as root ok 14 # skip must be run as root ok 15 # skip must be run as root ok 16 # skip must be run as root ok 17 # skip must be run as root ok 18 # skip must be run as root ok 19 # skip must be run as root ok 20 # skip must be run as root ok 21 # skip must be run as root ok 22 # skip must be run as root ok 23 # skip must be run as root ok 24 # skip must be run as root ok 25 # skip must be run as root ok 26 # skip must be run as root ok 27 # skip must be run as root ok 28 # skip must be run as root ok 29 # skip must be run as root ok t/09-error.t ............... 1..10 ok 1 - compile() with an invalid filter string ok 2 - - result must not be null: -1 ok 3 - geterr() ok 4 - - $err must not be null: can't parse filter expression: syntax error ok 5 - compile() with a valid filter string ok 6 - - result must be null: 0 ok 7 - geterr() ok 8 - - $err must be null ok 9 - strerror() ok 10 - - $err must not be null ok t/10-fileno.t .............. 1..21 ok 1 - calling file() with no argument ok 2 - calling file() with incorrect argument type ok 3 - calling fileno() with no argument ok 4 - calling fileno() with incorrect argument type ok 5 - calling get_selectable_fd() with no argument ok 6 - calling get_selectable_fd() with incorrect argument type ok 7 # skip must be run as root ok 8 # skip must be run as root ok 9 # skip must be run as root ok 10 # skip must be run as root ok 11 # skip must be run as root ok 12 # skip must be run as root ok 13 # skip must be run as root ok 14 - '$pcap' isa 'pcap_tPtr' not ok 15 # TODO & SKIP file() on a dump file currently causes a segmentation fault not ok 16 # TODO & SKIP file() on a dump file currently causes a segmentation fault not ok 17 # TODO & SKIP file() on a dump file currently causes a segmentation fault ok 18 - fileno() on a dump file ok 19 - - fileno must be an integer: -1 # TODO => result should be -1 ok 20 - get_selectable_fd() on a dump file ok 21 - - fileno must be an integer: 3 ok t/11-snapshot.t ............ skipped: must be run as root t/12-next.t ................ skipped: pcap_next() behaves too strangely for being tested on random machines t/13-dispatch.t ............ skipped: must be run as root t/14-datalink.t ............ 1..59 ok 1 - calling datalink() with no argument ok 2 - calling datalink() with incorrect argument type ok 3 - calling set_datalink() with no argument ok 4 - calling set_datalink() with incorrect argument type ok 5 - calling datalink_name_to_val() with no argument ok 6 - calling datalink_val_to_name() with no argument ok 7 - calling datalink_val_to_description() with no argument ok 8 # skip must be run as root ok 9 # skip must be run as root ok 10 # skip must be run as root ok 11 # skip must be run as root ok 12 # skip must be run as root ok 13 - '$pcap' isa 'pcap_tPtr' ok 14 - datalink() on a save file ok 15 - - datalink is an integer ok 16 - - datalink is DLT_EN10MB (Ethernet) ok 17 - set_datalink() on a save file ok 18 - - returned -1 (expected failure) ok 19 - '$pcap' isa 'pcap_tPtr' ok 20 - datalink() on a dead descriptor ok 21 - - datalink is an integer ok 22 - set_datalink() on a dead descriptor ok 23 - - returned -1 (expected failure) ok 24 - datalink_name_to_val(SLIP) ok 25 - - checking expected value ok 26 - datalink_name_to_val(LTalk) ok 27 - - checking expected value ok 28 - datalink_name_to_val(undef) ok 29 - - checking expected value ok 30 - datalink_name_to_val(ieee802_11) ok 31 - - checking expected value ok 32 - datalink_name_to_val(PPP_serial) ok 33 - - checking expected value ok 34 - datalink_name_to_val(raw) ok 35 - - checking expected value ok 36 - datalink_val_to_name(105) ok 37 - - checking expected value ok 38 - datalink_val_to_name(50) ok 39 - - checking expected value ok 40 - datalink_val_to_name(12) ok 41 - - checking expected value ok 42 - datalink_val_to_name(114) ok 43 - - checking expected value ok 44 - datalink_val_to_name(0) ok 45 - - checking expected value ok 46 - datalink_val_to_name(8) ok 47 - - checking expected value ok 48 - datalink_val_to_description(0) ok 49 - - checking expected value ok 50 - datalink_val_to_description(8) ok 51 - - checking expected value ok 52 - datalink_val_to_description(114) ok 53 - - checking expected value ok 54 - datalink_val_to_description(50) ok 55 - - checking expected value ok 56 - datalink_val_to_description(12) ok 57 - - checking expected value ok 58 - datalink_val_to_description(105) ok 59 - - checking expected value ok # This platform has been detected as a little endian architecture t/15-is_swapped.t .......... 1..5 ok 1 - checking flags consistency ok 2 - '$pcap' isa 'pcap_tPtr' ok 3 - testing with a big endian dump ok 4 - '$pcap' isa 'pcap_tPtr' ok 5 - testing with a little endian dump ok t/16-setnonblock.t ......... 1..23 ok 1 - calling setnonblock() with no argument ok 2 - calling setnonblock() with incorrect argument type ok 3 - calling getnonblock() with no argument ok 4 - calling getnonblock() with incorrect argument type ok 5 # skip must be run as root ok 6 # skip must be run as root ok 7 # skip must be run as root ok 8 # skip must be run as root ok 9 # skip must be run as root ok 10 # skip must be run as root ok 11 # skip must be run as root ok 12 # skip must be run as root ok 13 # skip must be run as root ok 14 # skip must be run as root ok 15 # skip must be run as root ok 16 # skip must be run as root ok 17 # skip must be run as root ok 18 - '$pcap' isa 'pcap_tPtr' ok 19 - calling setnonblock() with incorrect argument type for arg3 ok 20 - calling getnonblock() with incorrect argument type for arg2 ok 21 - getnonblock() ok 22 - - err must be null ok 23 - - state must be 0 for savefile ok # libpcap version 1.10.5 (with TPACKET_V3) t/17-lib_version.t ......... 1..2 ok 1 - lib_version() ok 2 - - checking version string (libpcap version 1.10.5 (with TPACKET_V3)) ok t/18-open_dead.t ........... 1..5 ok 1 - calling open_dead() with no argument ok 2 - open_dead() ok 3 - - $pcap is defined ok 4 - ' - $pcap' isa 'SCALAR' ok 5 - ' - $pcap' isa 'pcap_tPtr' ok t/19-breakloop.t ........... skipped: must be run as root t/20-constants.t ........... 1..276 ok 1 - trying a non-existing macro ok 2 - trying a non-existing macro ok 3 - calling the constant BPF_A as a function ok 4 - checking that BPF_A is a number (16) ok 5 - calling the constant BPF_ABS as a function ok 6 - checking that BPF_ABS is a number (32) ok 7 - calling the constant BPF_ADD as a function ok 8 - checking that BPF_ADD is a number (0) ok 9 - calling the constant BPF_ALIGNMENT as a function ok 10 - checking that BPF_ALIGNMENT is a number (4) ok 11 - calling the constant BPF_ALU as a function ok 12 - checking that BPF_ALU is a number (4) ok 13 - calling the constant BPF_AND as a function ok 14 - checking that BPF_AND is a number (80) ok 15 - calling the constant BPF_B as a function ok 16 - checking that BPF_B is a number (16) ok 17 - calling the constant BPF_DIV as a function ok 18 - checking that BPF_DIV is a number (48) ok 19 - calling the constant BPF_H as a function ok 20 - checking that BPF_H is a number (8) ok 21 - calling the constant BPF_IMM as a function ok 22 - checking that BPF_IMM is a number (0) ok 23 - calling the constant BPF_IND as a function ok 24 - checking that BPF_IND is a number (64) ok 25 - calling the constant BPF_JA as a function ok 26 - checking that BPF_JA is a number (0) ok 27 - calling the constant BPF_JEQ as a function ok 28 - checking that BPF_JEQ is a number (16) ok 29 - calling the constant BPF_JGE as a function ok 30 - checking that BPF_JGE is a number (48) ok 31 - calling the constant BPF_JGT as a function ok 32 - checking that BPF_JGT is a number (32) ok 33 - calling the constant BPF_JMP as a function ok 34 - checking that BPF_JMP is a number (5) ok 35 - calling the constant BPF_JSET as a function ok 36 - checking that BPF_JSET is a number (64) ok 37 - calling the constant BPF_K as a function ok 38 - checking that BPF_K is a number (0) ok 39 - calling the constant BPF_LD as a function ok 40 - checking that BPF_LD is a number (0) ok 41 - calling the constant BPF_LDX as a function ok 42 - checking that BPF_LDX is a number (1) ok 43 - calling the constant BPF_LEN as a function ok 44 - checking that BPF_LEN is a number (128) ok 45 - calling the constant BPF_LSH as a function ok 46 - checking that BPF_LSH is a number (96) ok 47 - calling the constant via its name ok 48 # skip irrelevant test in this case ok 49 - calling the constant via its name ok 50 # skip irrelevant test in this case ok 51 - calling the constant via its name ok 52 # skip irrelevant test in this case ok 53 - calling the constant BPF_MEM as a function ok 54 - checking that BPF_MEM is a number (96) ok 55 - calling the constant BPF_MEMWORDS as a function ok 56 - checking that BPF_MEMWORDS is a number (16) ok 57 - calling the constant via its name ok 58 # skip irrelevant test in this case ok 59 - calling the constant via its name ok 60 # skip irrelevant test in this case ok 61 - calling the constant BPF_MISC as a function ok 62 - checking that BPF_MISC is a number (7) ok 63 - calling the constant BPF_MSH as a function ok 64 - checking that BPF_MSH is a number (160) ok 65 - calling the constant BPF_MUL as a function ok 66 - checking that BPF_MUL is a number (32) ok 67 - calling the constant BPF_NEG as a function ok 68 - checking that BPF_NEG is a number (128) ok 69 - calling the constant BPF_OR as a function ok 70 - checking that BPF_OR is a number (64) ok 71 - calling the constant BPF_RELEASE as a function ok 72 - checking that BPF_RELEASE is a number (199606) ok 73 - calling the constant BPF_RET as a function ok 74 - checking that BPF_RET is a number (6) ok 75 - calling the constant BPF_RSH as a function ok 76 - checking that BPF_RSH is a number (112) ok 77 - calling the constant BPF_ST as a function ok 78 - checking that BPF_ST is a number (2) ok 79 - calling the constant BPF_STX as a function ok 80 - checking that BPF_STX is a number (3) ok 81 - calling the constant BPF_SUB as a function ok 82 - checking that BPF_SUB is a number (16) ok 83 - calling the constant BPF_TAX as a function ok 84 - checking that BPF_TAX is a number (0) ok 85 - calling the constant BPF_TXA as a function ok 86 - checking that BPF_TXA is a number (128) ok 87 - calling the constant BPF_W as a function ok 88 - checking that BPF_W is a number (0) ok 89 - calling the constant BPF_X as a function ok 90 - checking that BPF_X is a number (8) ok 91 - calling the constant DLT_AIRONET_HEADER as a function ok 92 - checking that DLT_AIRONET_HEADER is a number (120) ok 93 - calling the constant DLT_APPLE_IP_OVER_IEEE1394 as a function ok 94 - checking that DLT_APPLE_IP_OVER_IEEE1394 is a number (138) ok 95 - calling the constant DLT_ARCNET as a function ok 96 - checking that DLT_ARCNET is a number (7) ok 97 - calling the constant DLT_ARCNET_LINUX as a function ok 98 - checking that DLT_ARCNET_LINUX is a number (129) ok 99 - calling the constant DLT_ATM_CLIP as a function ok 100 - checking that DLT_ATM_CLIP is a number (19) ok 101 - calling the constant DLT_ATM_RFC1483 as a function ok 102 - checking that DLT_ATM_RFC1483 is a number (11) ok 103 - calling the constant DLT_AURORA as a function ok 104 - checking that DLT_AURORA is a number (126) ok 105 - calling the constant DLT_AX25 as a function ok 106 - checking that DLT_AX25 is a number (3) ok 107 - calling the constant DLT_CHAOS as a function ok 108 - checking that DLT_CHAOS is a number (5) ok 109 - calling the constant DLT_CHDLC as a function ok 110 - checking that DLT_CHDLC is a number (104) ok 111 - calling the constant DLT_CISCO_IOS as a function ok 112 - checking that DLT_CISCO_IOS is a number (118) ok 113 - calling the constant DLT_C_HDLC as a function ok 114 - checking that DLT_C_HDLC is a number (104) ok 115 - calling the constant DLT_DOCSIS as a function ok 116 - checking that DLT_DOCSIS is a number (143) ok 117 - calling the constant DLT_ECONET as a function ok 118 - checking that DLT_ECONET is a number (115) ok 119 - calling the constant DLT_EN10MB as a function ok 120 - checking that DLT_EN10MB is a number (1) ok 121 - calling the constant DLT_EN3MB as a function ok 122 - checking that DLT_EN3MB is a number (2) ok 123 - calling the constant DLT_ENC as a function ok 124 - checking that DLT_ENC is a number (109) ok 125 - calling the constant DLT_FDDI as a function ok 126 - checking that DLT_FDDI is a number (10) ok 127 - calling the constant DLT_FRELAY as a function ok 128 - checking that DLT_FRELAY is a number (107) ok 129 - calling the constant DLT_HHDLC as a function ok 130 - checking that DLT_HHDLC is a number (121) ok 131 - calling the constant DLT_IBM_SN as a function ok 132 - checking that DLT_IBM_SN is a number (146) ok 133 - calling the constant DLT_IBM_SP as a function ok 134 - checking that DLT_IBM_SP is a number (145) ok 135 - calling the constant DLT_IEEE802 as a function ok 136 - checking that DLT_IEEE802 is a number (6) ok 137 - calling the constant DLT_IEEE802_11 as a function ok 138 - checking that DLT_IEEE802_11 is a number (105) ok 139 - calling the constant DLT_IEEE802_11_RADIO as a function ok 140 - checking that DLT_IEEE802_11_RADIO is a number (127) ok 141 - calling the constant DLT_IEEE802_11_RADIO_AVS as a function ok 142 - checking that DLT_IEEE802_11_RADIO_AVS is a number (163) ok 143 - calling the constant DLT_IPFILTER as a function ok 144 - checking that DLT_IPFILTER is a number (116) ok 145 - calling the constant DLT_IP_OVER_FC as a function ok 146 - checking that DLT_IP_OVER_FC is a number (122) ok 147 - calling the constant DLT_JUNIPER_ATM1 as a function ok 148 - checking that DLT_JUNIPER_ATM1 is a number (137) ok 149 - calling the constant DLT_JUNIPER_ATM2 as a function ok 150 - checking that DLT_JUNIPER_ATM2 is a number (135) ok 151 - calling the constant DLT_JUNIPER_ES as a function ok 152 - checking that DLT_JUNIPER_ES is a number (132) ok 153 - calling the constant DLT_JUNIPER_GGSN as a function ok 154 - checking that DLT_JUNIPER_GGSN is a number (133) ok 155 - calling the constant DLT_JUNIPER_MFR as a function ok 156 - checking that DLT_JUNIPER_MFR is a number (134) ok 157 - calling the constant DLT_JUNIPER_MLFR as a function ok 158 - checking that DLT_JUNIPER_MLFR is a number (131) ok 159 - calling the constant DLT_JUNIPER_MLPPP as a function ok 160 - checking that DLT_JUNIPER_MLPPP is a number (130) ok 161 - calling the constant DLT_JUNIPER_MONITOR as a function ok 162 - checking that DLT_JUNIPER_MONITOR is a number (164) ok 163 - calling the constant DLT_JUNIPER_SERVICES as a function ok 164 - checking that DLT_JUNIPER_SERVICES is a number (136) ok 165 - calling the constant DLT_LINUX_IRDA as a function ok 166 - checking that DLT_LINUX_IRDA is a number (144) ok 167 - calling the constant DLT_LINUX_SLL as a function ok 168 - checking that DLT_LINUX_SLL is a number (113) ok 169 - calling the constant DLT_LOOP as a function ok 170 - checking that DLT_LOOP is a number (108) ok 171 - calling the constant DLT_LTALK as a function ok 172 - checking that DLT_LTALK is a number (114) ok 173 - calling the constant DLT_NULL as a function ok 174 - checking that DLT_NULL is a number (0) ok 175 - calling the constant via its name ok 176 # skip irrelevant test in this case ok 177 - calling the constant DLT_PCI_EXP as a function ok 178 - checking that DLT_PCI_EXP is a number (125) ok 179 - calling the constant DLT_PFLOG as a function ok 180 - checking that DLT_PFLOG is a number (117) ok 181 - calling the constant DLT_PFSYNC as a function ok 182 - checking that DLT_PFSYNC is a number (246) ok 183 - calling the constant DLT_PPP as a function ok 184 - checking that DLT_PPP is a number (9) ok 185 - calling the constant DLT_PPP_BSDOS as a function ok 186 - checking that DLT_PPP_BSDOS is a number (16) ok 187 - calling the constant DLT_PPP_ETHER as a function ok 188 - checking that DLT_PPP_ETHER is a number (51) ok 189 - calling the constant DLT_PPP_SERIAL as a function ok 190 - checking that DLT_PPP_SERIAL is a number (50) ok 191 - calling the constant DLT_PRISM_HEADER as a function ok 192 - checking that DLT_PRISM_HEADER is a number (119) ok 193 - calling the constant DLT_PRONET as a function ok 194 - checking that DLT_PRONET is a number (4) ok 195 - calling the constant DLT_RAW as a function ok 196 - checking that DLT_RAW is a number (12) ok 197 - calling the constant DLT_RIO as a function ok 198 - checking that DLT_RIO is a number (124) ok 199 - calling the constant DLT_SLIP as a function ok 200 - checking that DLT_SLIP is a number (8) ok 201 - calling the constant DLT_SLIP_BSDOS as a function ok 202 - checking that DLT_SLIP_BSDOS is a number (15) ok 203 - calling the constant DLT_SUNATM as a function ok 204 - checking that DLT_SUNATM is a number (123) ok 205 - calling the constant DLT_SYMANTEC_FIREWALL as a function ok 206 - checking that DLT_SYMANTEC_FIREWALL is a number (99) ok 207 - calling the constant DLT_TZSP as a function ok 208 - checking that DLT_TZSP is a number (128) ok 209 - calling the constant DLT_USER0 as a function ok 210 - checking that DLT_USER0 is a number (147) ok 211 - calling the constant DLT_USER1 as a function ok 212 - checking that DLT_USER1 is a number (148) ok 213 - calling the constant DLT_USER10 as a function ok 214 - checking that DLT_USER10 is a number (157) ok 215 - calling the constant DLT_USER11 as a function ok 216 - checking that DLT_USER11 is a number (158) ok 217 - calling the constant DLT_USER12 as a function ok 218 - checking that DLT_USER12 is a number (159) ok 219 - calling the constant DLT_USER13 as a function ok 220 - checking that DLT_USER13 is a number (160) ok 221 - calling the constant DLT_USER14 as a function ok 222 - checking that DLT_USER14 is a number (161) ok 223 - calling the constant DLT_USER15 as a function ok 224 - checking that DLT_USER15 is a number (162) ok 225 - calling the constant DLT_USER2 as a function ok 226 - checking that DLT_USER2 is a number (149) ok 227 - calling the constant DLT_USER3 as a function ok 228 - checking that DLT_USER3 is a number (150) ok 229 - calling the constant DLT_USER4 as a function ok 230 - checking that DLT_USER4 is a number (151) ok 231 - calling the constant DLT_USER5 as a function ok 232 - checking that DLT_USER5 is a number (152) ok 233 - calling the constant DLT_USER6 as a function ok 234 - checking that DLT_USER6 is a number (153) ok 235 - calling the constant DLT_USER7 as a function ok 236 - checking that DLT_USER7 is a number (154) ok 237 - calling the constant DLT_USER8 as a function ok 238 - checking that DLT_USER8 is a number (155) ok 239 - calling the constant DLT_USER9 as a function ok 240 - checking that DLT_USER9 is a number (156) ok 241 - calling the constant via its name ok 242 # skip irrelevant test in this case ok 243 - calling the constant via its name ok 244 # skip irrelevant test in this case ok 245 - calling the constant via its name ok 246 # skip irrelevant test in this case ok 247 - calling the constant PCAP_ERRBUF_SIZE as a function ok 248 - checking that PCAP_ERRBUF_SIZE is a number (256) ok 249 - calling the constant PCAP_IF_LOOPBACK as a function ok 250 - checking that PCAP_IF_LOOPBACK is a number (1) ok 251 - calling the constant PCAP_VERSION_MAJOR as a function ok 252 - checking that PCAP_VERSION_MAJOR is a number (2) ok 253 - calling the constant PCAP_VERSION_MINOR as a function ok 254 - checking that PCAP_VERSION_MINOR is a number (4) ok 255 - calling the constant via its name ok 256 # skip irrelevant test in this case ok 257 - calling the constant via its name ok 258 # skip irrelevant test in this case ok 259 - calling the constant via its name ok 260 # skip irrelevant test in this case ok 261 - calling the constant via its name ok 262 # skip irrelevant test in this case ok 263 - calling the constant via its name ok 264 # skip irrelevant test in this case ok 265 - calling the constant PCAP_SAMP_NOSAMP as a function ok 266 - checking that PCAP_SAMP_NOSAMP is a number (0) ok 267 - calling the constant PCAP_SAMP_FIRST_AFTER_N_MS as a function ok 268 - checking that PCAP_SAMP_FIRST_AFTER_N_MS is a number (2) ok 269 - calling the constant PCAP_SAMP_1_EVERY_N as a function ok 270 - checking that PCAP_SAMP_1_EVERY_N is a number (1) ok 271 - calling the constant PCAP_SRC_FILE as a function ok 272 - checking that PCAP_SRC_FILE is a number (2) ok 273 - calling the constant PCAP_SRC_IFLOCAL as a function ok 274 - checking that PCAP_SRC_IFLOCAL is a number (3) ok 275 - calling the constant PCAP_SRC_IFREMOTE as a function ok 276 - checking that PCAP_SRC_IFREMOTE is a number (4) ok t/21-next_ex.t ............. skipped: slowness and random failures... testing pcap_next_ex() is a PITA t/22-open.t ................ skipped: pcap_open() is not available t/23-srcstr.t .............. skipped: pcap_createsrcstr() is not available t/24-offline_filter.t ...... 1..7 ok 1 - open testfile ok 2 - compile icmp filter ok 3 - compile tcp filter ok 4 - calling offline_filter() with no argument ok 5 - read all packets ok 6 - found all icmp packets ok 7 - test for tcp packets in an icmp-only testfile ok t/50-anyevent-pcap.t ....... skipped: AnyEvent is not available t/50-net-pcap-easy.t ....... skipped: Net::Pcap::Easy is not available t/50-poe-component-pcap.t .. skipped: POE is not available t/distchk.t ................ skipped: Test::Distribution required for checking distribution t/pod.t .................... 1..2 ok 1 - POD test for blib/script/pcapinfo ok 2 - POD test for blib/lib/Net/Pcap.pm ok t/podcover.t ............... skipped: Currently not working for Net::Pcap t/podspell.t ............... skipped: Pod spelling: for maintainer only t/portfs.t ................. skipped: Only for the module maintainer All tests successful. Test Summary Report ------------------- t/10-fileno.t (Wstat: 0 Tests: 21 Failed: 0) TODO passed: 19 Files=33, Tests=488, 4 wallclock secs ( 0.12 usr 0.17 sys + 3.06 cusr 0.61 csys = 3.96 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libnet-pcap-perl-0.21' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libnet-pcap-perl/ make -j12 install DESTDIR=/build/reproducible-path/libnet-pcap-perl-0.21/debian/libnet-pcap-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/reproducible-path/libnet-pcap-perl-0.21' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Pcap.bs blib/arch/auto/Net/Pcap/Pcap.bs 644 Manifying 1 pod document Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libnet-pcap-perl-0.21/debian/libnet-pcap-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/auto/Net/Pcap/Pcap.so Installing /build/reproducible-path/libnet-pcap-perl-0.21/debian/libnet-pcap-perl/usr/lib/aarch64-linux-gnu/perl5/5.40/Net/Pcap.pm Installing /build/reproducible-path/libnet-pcap-perl-0.21/debian/libnet-pcap-perl/usr/share/man/man1/pcapinfo.1p Installing /build/reproducible-path/libnet-pcap-perl-0.21/debian/libnet-pcap-perl/usr/share/man/man3/Net::Pcap.3pm Installing /build/reproducible-path/libnet-pcap-perl-0.21/debian/libnet-pcap-perl/usr/bin/pcapinfo make[1]: Leaving directory '/build/reproducible-path/libnet-pcap-perl-0.21' dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-aarch64.so.1 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-aarch64.so.1.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libnet-pcap-perl' in '../libnet-pcap-perl_0.21-2_arm64.deb'. dpkg-deb: building package 'libnet-pcap-perl-dbgsym' in '../libnet-pcap-perl-dbgsym_0.21-2_arm64.deb'. dpkg-genbuildinfo --build=binary -O../libnet-pcap-perl_0.21-2_arm64.buildinfo dpkg-genchanges --build=binary -O../libnet-pcap-perl_0.21-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/2634491/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/2634491/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/2634491 and its subdirectories I: Current time: Thu Sep 18 00:33:44 +14 2025 I: pbuilder-time-stamp: 1758105224