I: pbuilder: network access will be disabled during build
I: Current time: Sat Dec 7 12:52:19 -12 2024
I: pbuilder-time-stamp: 1733619139
I: Building the build Environment
I: extracting base tarball [/var/cache/pbuilder/unstable-reproducible-base.tgz]
I: copying local configuration
W: --override-config is not set; not updating apt.conf Read the manpage for details.
I: mounting /proc filesystem
I: mounting /sys filesystem
I: creating /{dev,run}/shm
I: mounting /dev/pts filesystem
I: redirecting /dev/ptmx to /dev/pts/ptmx
I: policy-rc.d already exists
I: Copying source file
I: copying [libcoro-perl_6.570-3.dsc]
I: copying [./libcoro-perl_6.570.orig.tar.gz]
I: copying [./libcoro-perl_6.570-3.debian.tar.xz]
I: Extracting source
gpgv: Signature made Thu Oct 13 15:30:12 2022
gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8
gpgv: Can't check signature: No public key
dpkg-source: warning: cannot verify inline signature for ./libcoro-perl_6.570-3.dsc: no acceptable signature found
dpkg-source: info: extracting libcoro-perl in libcoro-perl-6.570
dpkg-source: info: unpacking libcoro-perl_6.570.orig.tar.gz
dpkg-source: info: unpacking libcoro-perl_6.570-3.debian.tar.xz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: applying whatis.patch
dpkg-source: info: applying spelling.patch
I: Not using root during the build.
I: Installing the build-deps
I: user script /srv/workspace/pbuilder/5049/tmp/hooks/D02_print_environment starting
I: set
BUILDDIR='/build/reproducible-path'
BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other'
BUILDUSERNAME='pbuilder1'
BUILD_ARCH='armhf'
DEBIAN_FRONTEND='noninteractive'
DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 '
DISTRIBUTION='unstable'
HOME='/root'
HOST_ARCH='armhf'
IFS='
'
INVOCATION_ID='35d56b8fa1774476bf9b4eef7d063d20'
LANG='C'
LANGUAGE='en_US:en'
LC_ALL='C'
MAIL='/var/mail/root'
OPTIND='1'
PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games'
PBCURRENTCOMMANDLINEOPERATION='build'
PBUILDER_OPERATION='build'
PBUILDER_PKGDATADIR='/usr/share/pbuilder'
PBUILDER_PKGLIBDIR='/usr/lib/pbuilder'
PBUILDER_SYSCONFDIR='/etc'
PPID='5049'
PS1='# '
PS2='> '
PS4='+ '
PWD='/'
SHELL='/bin/bash'
SHLVL='2'
SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.FglW6o01/pbuilderrc_Edbr --distribution unstable --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/unstable-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.FglW6o01/b1 --logfile b1/build.log libcoro-perl_6.570-3.dsc'
SUDO_GID='113'
SUDO_UID='107'
SUDO_USER='jenkins'
TERM='unknown'
TZ='/usr/share/zoneinfo/Etc/GMT+12'
USER='root'
_='/usr/bin/systemd-run'
http_proxy='http://10.0.0.15:3142/'
I: uname -a
Linux ff4a 6.1.0-28-armmp-lpae #1 SMP Debian 6.1.119-1 (2024-11-22) armv7l GNU/Linux
I: ls -l /bin
lrwxrwxrwx 1 root root 7 Nov 22 14:40 /bin -> usr/bin
I: user script /srv/workspace/pbuilder/5049/tmp/hooks/D02_print_environment finished
-> Attempting to satisfy build-dependencies
-> Creating pbuilder-satisfydepends-dummy package
Package: pbuilder-satisfydepends-dummy
Version: 0.invalid.0
Architecture: armhf
Maintainer: Debian Pbuilder Team <pbuilder-maint@lists.alioth.debian.org>
Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder
This package was created automatically by pbuilder to satisfy the
build-dependencies of the package being currently built.
Depends: debhelper-compat (= 13), libanyevent-perl, libcanary-stability-perl, libcommon-sense-perl, libev-perl, libevent-perl, libguard-perl, perl-xs-dev, perl:native
dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'.
Selecting previously unselected package pbuilder-satisfydepends-dummy.
(Reading database ... 19674 files and directories currently installed.)
Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ...
Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ...
dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested:
pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however:
Package debhelper-compat is not installed.
pbuilder-satisfydepends-dummy depends on libanyevent-perl; however:
Package libanyevent-perl is not installed.
pbuilder-satisfydepends-dummy depends on libcanary-stability-perl; however:
Package libcanary-stability-perl is not installed.
pbuilder-satisfydepends-dummy depends on libcommon-sense-perl; however:
Package libcommon-sense-perl is not installed.
pbuilder-satisfydepends-dummy depends on libev-perl; however:
Package libev-perl is not installed.
pbuilder-satisfydepends-dummy depends on libevent-perl; however:
Package libevent-perl is not installed.
pbuilder-satisfydepends-dummy depends on libguard-perl; however:
Package libguard-perl is not installed.
pbuilder-satisfydepends-dummy depends on perl-xs-dev; however:
Package perl-xs-dev is not installed.
pbuilder-satisfydepends-dummy depends on perl:native.
Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ...
Reading package lists...
Building dependency tree...
Reading state information...
Initializing package states...
Writing extended state information...
Building tag database...
pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0)
pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0)
The following NEW packages will be installed:
autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libanyevent-perl{a} libarchive-zip-perl{a} libcanary-stability-perl{a} libcommon-sense-perl{a} libdebhelper-perl{a} libelf1t64{a} libev-perl{a} libevent-perl{a} libfile-stripnondeterminism-perl{a} libguard-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a}
The following packages are RECOMMENDED but will NOT be installed:
curl libarchive-cpio-perl libasync-interrupt-perl libltdl-dev libmail-sendmail-perl lynx wget
0 packages upgraded, 36 newly installed, 0 to remove and 0 not upgraded.
Need to get 21.0 MB of archives. After unpacking 76.0 MB will be used.
Writing extended state information...
Get: 1 http://deb.debian.org/debian unstable/main armhf sensible-utils all 0.0.24 [24.8 kB]
Get: 2 http://deb.debian.org/debian unstable/main armhf libmagic-mgc armhf 1:5.45-3+b1 [314 kB]
Get: 3 http://deb.debian.org/debian unstable/main armhf libmagic1t64 armhf 1:5.45-3+b1 [98.5 kB]
Get: 4 http://deb.debian.org/debian unstable/main armhf file armhf 1:5.45-3+b1 [42.3 kB]
Get: 5 http://deb.debian.org/debian unstable/main armhf gettext-base armhf 0.22.5-2 [195 kB]
Get: 6 http://deb.debian.org/debian unstable/main armhf libuchardet0 armhf 0.0.8-1+b2 [65.6 kB]
Get: 7 http://deb.debian.org/debian unstable/main armhf groff-base armhf 1.23.0-6 [1091 kB]
Get: 8 http://deb.debian.org/debian unstable/main armhf bsdextrautils armhf 2.40.2-12 [83.9 kB]
Get: 9 http://deb.debian.org/debian unstable/main armhf libpipeline1 armhf 1.5.8-1 [35.0 kB]
Get: 10 http://deb.debian.org/debian unstable/main armhf man-db armhf 2.13.0-1 [1382 kB]
Get: 11 http://deb.debian.org/debian unstable/main armhf m4 armhf 1.4.19-4 [264 kB]
Get: 12 http://deb.debian.org/debian unstable/main armhf autoconf all 2.72-3 [493 kB]
Get: 13 http://deb.debian.org/debian unstable/main armhf autotools-dev all 20220109.1 [51.6 kB]
Get: 14 http://deb.debian.org/debian unstable/main armhf automake all 1:1.16.5-1.3 [823 kB]
Get: 15 http://deb.debian.org/debian unstable/main armhf autopoint all 0.22.5-2 [723 kB]
Get: 16 http://deb.debian.org/debian unstable/main armhf libdebhelper-perl all 13.20 [89.7 kB]
Get: 17 http://deb.debian.org/debian unstable/main armhf libtool all 2.4.7-8 [517 kB]
Get: 18 http://deb.debian.org/debian unstable/main armhf dh-autoreconf all 20 [17.1 kB]
Get: 19 http://deb.debian.org/debian unstable/main armhf libarchive-zip-perl all 1.68-1 [104 kB]
Get: 20 http://deb.debian.org/debian unstable/main armhf libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB]
Get: 21 http://deb.debian.org/debian unstable/main armhf dh-strip-nondeterminism all 1.14.0-1 [8448 B]
Get: 22 http://deb.debian.org/debian unstable/main armhf libelf1t64 armhf 0.192-4 [184 kB]
Get: 23 http://deb.debian.org/debian unstable/main armhf dwz armhf 0.15-1+b2 [106 kB]
Get: 24 http://deb.debian.org/debian unstable/main armhf libicu72 armhf 72.1-5+b1 [9088 kB]
Get: 25 http://deb.debian.org/debian unstable/main armhf libxml2 armhf 2.12.7+dfsg+really2.9.14-0.2+b1 [605 kB]
Get: 26 http://deb.debian.org/debian unstable/main armhf gettext armhf 0.22.5-2 [1485 kB]
Get: 27 http://deb.debian.org/debian unstable/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB]
Get: 28 http://deb.debian.org/debian unstable/main armhf po-debconf all 1.0.21+nmu1 [248 kB]
Get: 29 http://deb.debian.org/debian unstable/main armhf debhelper all 13.20 [915 kB]
Get: 30 http://deb.debian.org/debian unstable/main armhf libanyevent-perl armhf 7.170-2+b6 [384 kB]
Get: 31 http://deb.debian.org/debian unstable/main armhf libcanary-stability-perl all 2013-1 [7884 B]
Get: 32 http://deb.debian.org/debian unstable/main armhf libcommon-sense-perl armhf 3.75-3+b3 [22.9 kB]
Get: 33 http://deb.debian.org/debian unstable/main armhf libev-perl armhf 4.34-1+b3 [251 kB]
Get: 34 http://deb.debian.org/debian unstable/main armhf libevent-perl armhf 1.28-2+b3 [255 kB]
Get: 35 http://deb.debian.org/debian unstable/main armhf libguard-perl armhf 1.023-2+b4 [15.1 kB]
Get: 36 http://deb.debian.org/debian unstable/main armhf libperl-dev armhf 5.40.0-8 [998 kB]
Fetched 21.0 MB in 2s (11.7 MB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package sensible-utils.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 19674 files and directories currently installed.)
Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ...
Unpacking sensible-utils (0.0.24) ...
Selecting previously unselected package libmagic-mgc.
Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_armhf.deb ...
Unpacking libmagic-mgc (1:5.45-3+b1) ...
Selecting previously unselected package libmagic1t64:armhf.
Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_armhf.deb ...
Unpacking libmagic1t64:armhf (1:5.45-3+b1) ...
Selecting previously unselected package file.
Preparing to unpack .../03-file_1%3a5.45-3+b1_armhf.deb ...
Unpacking file (1:5.45-3+b1) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../04-gettext-base_0.22.5-2_armhf.deb ...
Unpacking gettext-base (0.22.5-2) ...
Selecting previously unselected package libuchardet0:armhf.
Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_armhf.deb ...
Unpacking libuchardet0:armhf (0.0.8-1+b2) ...
Selecting previously unselected package groff-base.
Preparing to unpack .../06-groff-base_1.23.0-6_armhf.deb ...
Unpacking groff-base (1.23.0-6) ...
Selecting previously unselected package bsdextrautils.
Preparing to unpack .../07-bsdextrautils_2.40.2-12_armhf.deb ...
Unpacking bsdextrautils (2.40.2-12) ...
Selecting previously unselected package libpipeline1:armhf.
Preparing to unpack .../08-libpipeline1_1.5.8-1_armhf.deb ...
Unpacking libpipeline1:armhf (1.5.8-1) ...
Selecting previously unselected package man-db.
Preparing to unpack .../09-man-db_2.13.0-1_armhf.deb ...
Unpacking man-db (2.13.0-1) ...
Selecting previously unselected package m4.
Preparing to unpack .../10-m4_1.4.19-4_armhf.deb ...
Unpacking m4 (1.4.19-4) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../11-autoconf_2.72-3_all.deb ...
Unpacking autoconf (2.72-3) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ...
Unpacking autopoint (0.22.5-2) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ...
Unpacking libdebhelper-perl (13.20) ...
Selecting previously unselected package libtool.
Preparing to unpack .../16-libtool_2.4.7-8_all.deb ...
Unpacking libtool (2.4.7-8) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../17-dh-autoreconf_20_all.deb ...
Unpacking dh-autoreconf (20) ...
Selecting previously unselected package libarchive-zip-perl.
Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ...
Unpacking libarchive-zip-perl (1.68-1) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.14.0-1) ...
Selecting previously unselected package libelf1t64:armhf.
Preparing to unpack .../21-libelf1t64_0.192-4_armhf.deb ...
Unpacking libelf1t64:armhf (0.192-4) ...
Selecting previously unselected package dwz.
Preparing to unpack .../22-dwz_0.15-1+b2_armhf.deb ...
Unpacking dwz (0.15-1+b2) ...
Selecting previously unselected package libicu72:armhf.
Preparing to unpack .../23-libicu72_72.1-5+b1_armhf.deb ...
Unpacking libicu72:armhf (72.1-5+b1) ...
Selecting previously unselected package libxml2:armhf.
Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_armhf.deb ...
Unpacking libxml2:armhf (2.12.7+dfsg+really2.9.14-0.2+b1) ...
Selecting previously unselected package gettext.
Preparing to unpack .../25-gettext_0.22.5-2_armhf.deb ...
Unpacking gettext (0.22.5-2) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.6) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ...
Unpacking po-debconf (1.0.21+nmu1) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../28-debhelper_13.20_all.deb ...
Unpacking debhelper (13.20) ...
Selecting previously unselected package libanyevent-perl.
Preparing to unpack .../29-libanyevent-perl_7.170-2+b6_armhf.deb ...
Unpacking libanyevent-perl (7.170-2+b6) ...
Selecting previously unselected package libcanary-stability-perl.
Preparing to unpack .../30-libcanary-stability-perl_2013-1_all.deb ...
Unpacking libcanary-stability-perl (2013-1) ...
Selecting previously unselected package libcommon-sense-perl:armhf.
Preparing to unpack .../31-libcommon-sense-perl_3.75-3+b3_armhf.deb ...
Unpacking libcommon-sense-perl:armhf (3.75-3+b3) ...
Selecting previously unselected package libev-perl:armhf.
Preparing to unpack .../32-libev-perl_4.34-1+b3_armhf.deb ...
Unpacking libev-perl:armhf (4.34-1+b3) ...
Selecting previously unselected package libevent-perl.
Preparing to unpack .../33-libevent-perl_1.28-2+b3_armhf.deb ...
Unpacking libevent-perl (1.28-2+b3) ...
Selecting previously unselected package libguard-perl.
Preparing to unpack .../34-libguard-perl_1.023-2+b4_armhf.deb ...
Unpacking libguard-perl (1.023-2+b4) ...
Selecting previously unselected package libperl-dev:armhf.
Preparing to unpack .../35-libperl-dev_5.40.0-8_armhf.deb ...
Unpacking libperl-dev:armhf (5.40.0-8) ...
Setting up libanyevent-perl (7.170-2+b6) ...
Setting up libpipeline1:armhf (1.5.8-1) ...
Setting up libicu72:armhf (72.1-5+b1) ...
Setting up bsdextrautils (2.40.2-12) ...
Setting up libevent-perl (1.28-2+b3) ...
Setting up libmagic-mgc (1:5.45-3+b1) ...
Setting up libarchive-zip-perl (1.68-1) ...
Setting up libdebhelper-perl (13.20) ...
Setting up libmagic1t64:armhf (1:5.45-3+b1) ...
Setting up libcommon-sense-perl:armhf (3.75-3+b3) ...
Setting up gettext-base (0.22.5-2) ...
Setting up m4 (1.4.19-4) ...
Setting up libperl-dev:armhf (5.40.0-8) ...
Setting up file (1:5.45-3+b1) ...
Setting up libcanary-stability-perl (2013-1) ...
Setting up libelf1t64:armhf (0.192-4) ...
Setting up autotools-dev (20220109.1) ...
Setting up autopoint (0.22.5-2) ...
Setting up autoconf (2.72-3) ...
Setting up dwz (0.15-1+b2) ...
Setting up sensible-utils (0.0.24) ...
Setting up libuchardet0:armhf (0.0.8-1+b2) ...
Setting up libev-perl:armhf (4.34-1+b3) ...
Setting up libguard-perl (1.023-2+b4) ...
Setting up libxml2:armhf (2.12.7+dfsg+really2.9.14-0.2+b1) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up libfile-stripnondeterminism-perl (1.14.0-1) ...
Setting up gettext (0.22.5-2) ...
Setting up libtool (2.4.7-8) ...
Setting up intltool-debian (0.35.0+20060710.6) ...
Setting up dh-autoreconf (20) ...
Setting up dh-strip-nondeterminism (1.14.0-1) ...
Setting up groff-base (1.23.0-6) ...
Setting up po-debconf (1.0.21+nmu1) ...
Setting up man-db (2.13.0-1) ...
Not building database; man-db/auto-update is not 'true'.
Setting up debhelper (13.20) ...
Processing triggers for libc-bin (2.40-4) ...
Reading package lists...
Building dependency tree...
Reading state information...
Reading extended state information...
Initializing package states...
Writing extended state information...
Building tag database...
-> Finished parsing the build-deps
I: Building the package
I: Running cd /build/reproducible-path/libcoro-perl-6.570/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libcoro-perl_6.570-3_source.changes
dpkg-buildpackage: info: source package libcoro-perl
dpkg-buildpackage: info: source version 6.570-3
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Jelmer Vernooij <jelmer@debian.org>
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture armhf
debian/rules clean
dh clean
dh_clean
debian/rules binary
dh binary
dh_update_autotools_config
dh_autoreconf
dh_auto_configure
/usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libcoro-perl-6.570=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2" "LD=arm-linux-gnueabihf-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libcoro-perl-6.570=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now"
***
*** Canary::Stability COMPATIBILITY AND SUPPORT CHECK
*** =================================================
***
*** Hi!
***
*** I do my best to provide predictable and reliable software.
***
*** However, in recent releases, P5P (who maintain perl) have been
*** introducing regressions that are sometimes subtle and at other times
*** catastrophic, often for personal preferences with little or no concern
*** for existing code, most notably CPAN.
***
*** For this reason, it has become very hard for me to maintain the level
*** of reliability and support I have committed myself to in the past, at
*** least with some perl versions: I simply can't keep up working around new
*** bugs or gratituous incompatibilities, and in turn you might suffer from
*** unanticipated problems.
***
*** Therefore I have introduced a support and compatibility check, the results
*** of which follow below, together with a FAQ and some recommendations.
***
*** This check is just to let you know that there might be a risk, so you can
*** make judgement calls on how to proceed - it will not keep the module from
*** installing or working.
***
*** The stability canary says: (nothing, it was driven away by harsh weather)
***
*** It seems you are running perl version 5.040000, likely the "official" or
*** "standard" version. While there is nothing wrong with doing that,
*** standard perl versions 5.022 and up are not supported by Coro.
*** While this might be fatal, it might also be all right - if you run into
*** problems, you might want to downgrade your perl or switch to the
*** stability branch.
***
*** If everything works fine, you can ignore this message.
***
***
*** Stability canary mini-FAQ:
***
*** Do I need to do anything?
*** With luck, no. While some distributions are known to fail
*** already, most should probably work. This message is here
*** to alert you that your perl is not supported by Coro,
*** and if things go wrong, you either need to downgrade, or
*** sidegrade to the stability variant of your perl version,
*** or simply live with the consequences.
***
*** What is this canary thing?
*** It's purpose is to check support status of Coro with
*** respect to your perl version.
***
*** What is this "stability branch"?
*** It's a branch or fork of the official perl, by schmorp, to
*** improve stability and compatibility with existing modules.
***
*** How can I skip this prompt on automated installs?
*** Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment.
*** More info is in the Canary::Stability manpage.
***
*** Long version of this FAQ: http://stableperl.schmorp.de/faq.html
*** Stability Branch homepage: http://stableperl.schmorp.de/
***
Continue anyways? [y] y
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Event version 1.28 found, building Event support.
EV version 4.34 found, building EV support.
Checking if your kit is complete...
Looks good
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro has a number of configuration options. Due to its maturity, the
defaults that Coro chooses are usually fine, so you can decide to skip
these questions. Only if something went wrong you should select 'n'
here and manually configure Coro, and, of course, report this to the
maintainer :)
Skip further questions and use defaults (y/n)? [y] y
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can use a number of methods to implement coroutines at the C
level. The default chosen is based on your current confguration and is
correct in most cases, but you still can chose between these alternatives:
u The unix 'ucontext.h' functions are relatively new and not implemented
or well-tested in older unices. They allow very fast coroutine creation
and reasonably fast switching. They are, however, usually slower than
the other alternatives due to an extra syscall done by swapcontext. And
while nominally most portable (it's the only POSIX-standardised
interface for coroutines), ucontext functions are, as usual, broken on
most/all BSDs.
s If the ucontext functions are not working or you don't want
to use them for other reasons you can try a workaround using
setjmp/longjmp/sigaltstack (also standard unix functions). Coroutine
creation is rather slow, but switching is very fast (often much faster
than with the ucontext functions). Unfortunately, glibc-2.1 and
below don't even feature a working sigaltstack. You cannot use this
implementation if some other code uses SIGUSR2 or you plan to create
coroutines from an alternative signal stack, as both are being used for
coroutine creation.
a Handcoded assembly. This is the fastest and most compatible method,
with the least side effects, if it works, that is. It has been tested
on GNU/Linux x86 and x86_64 systems and should work on all x86/x86_64
systems using the SVR ELF ABI (it is also reported to be working on
Strawberry Perl for Windows using MinGW). This is the recommended
method on supported platforms. When it doesn't work, use another
method, such as (s)etjmp/longjmp.
l GNU/Linux. Very old GNU/Linux systems (glibc-2.1 and below) need
this hack. Since it is very linux-specific it is also quite fast and
recommended even for newer versions; when it works, that is (currently
x86 and a few others only. If it compiles, it's usually ok). Newer
glibc versions (>= 2.5) stop working with this implementation however.
i IRIX. For some reason, SGI really does not like to follow POSIX (does
that surprise you?), so this workaround might be needed (it's fast),
although [s] and [u] should also work now.
w Microsoft Windows. Try this on Microsoft Windows when using Cygwin or
the MSVC compilers (e.g. ActiveState Perl, but see "a" for Strawberry
Perl), although, as there is no standard on how to do this under
windows, different environments might work differently. Doh.
f Microsoft Windows. Try this on Microsoft Windows if w fails. It is slower
and uses a lot more memory, but should be working all the time.
p Use pthread API. Try to avoid this option, it was only created to
make a point about the programming language shootout. It is unlikely
to work with perls that have windows process emulation enabled ("perl
threads"). It is also likely the slowest method of implementing
coroutines. It might work fine as a last resort, however, as the
pthread API is slightly better tested than ucontext functions for
example. Of course, not on BSDs, who usually have very broken pthread
implementations.
Coro tries hard to come up with a suitable default for most systems,
so pressing return at the prompt usually does the right thing. If you
experience problems (e.g. make test fails) then you should experiment with
this setting.
Use which implementation,
<s>etjmp, <u>ctx, <a>sm, <i>rix, <l>inux, <p>threads, <w>indows, <f>iber? [s] s
Using setjmp/longjmp/sigaltstack implementation
Trying to detect stack growth direction (for TEST_sigaltstack)
You might see some warnings, this should not concern you.
libcoro/conftest.c: In function 'main':
libcoro/conftest.c:98:28: error: storage size of 'ss' isn't known
98 | struct sigaltstack ss;
| ^~
*****************************************************************************
If the testsuite fails PLEASE provide the following information
to Marc Lehmann <schmorp@schmorp.de>: operating system name, version,
architecture name and this string '|'. Thanks a lot!
*****************************************************************************
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Per-context stack size factor: Depending on your settings, Coro tries to
share the C stacks is creates as much as possible, but sometimes it needs
to allocate a new one. This setting controls the maximum size that gets
allocated, and should not be set too high, as memory and address space
still is wasted even if it's not fully used. The value entered will be
multiplied by sizeof(void *), which is usually 4 on 32-bit systems, and 8
on 64-bit systems.
A setting of 16384 (the default) therefore corresponds to a 64k..128k
stack, which usually is ample space (you might even want to try 8192 or
lower if your program creates many coroutines).
On systems supporting mmap and dynamic memory management, the actual
memory usually gets allocated on demand, but with many large stacks you
can still run out of address space on your typical 32 bit platform (not to
forget the pagetables).
Some perls (mostly threaded ones and perl compiled under linux 2.6) and
some programs (inefficient regexes can use a lot of stack space) may
need much, much more: If Coro segfaults with weird backtraces (e.g. in a
function prologue) or in t/10_bugs.t, you might want to increase this to
65536 or more.
The default should be fine, and can be changed at runtime with
Coro::State::cctx_stacksize.
C stack size factor? [16384] 16384
using a stacksize of 16384 * sizeof(void*)
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can optionally put a guard area before each stack segment: When the
stack is too small and the access is not too far outside the stack (i.e.
within the guard area), then the program will safely segfault instead of
running into other data. The cost is some additional overhead with is
usually negligible, and extra use of address space.
The guard area size currently needs to be specified in pages (typical
pagesizes are 4k and 8k). The guard area is only enabled on a few
hardcoded architectures and is ignored on others. The actual preprocessor
expression disables this feature if:
!__i386 && !__x86_64 && !__powerpc && !__m68k
&& !__alpha && !__mips && !__sparc64
The default, as usual, should be just fine.
Number of guard pages (0 disables)? [4] 4
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can tell valgrind about its stacks and so reduce spurious warnings
where valgrind would otherwise complain about possible stack switches.
Enabling this does not incur noticable runtime or memory overhead, but it
requires that you have the <valgrind/valgrind.h> header file available.
Valgrind support is completely optional, so disabling it is the safe
choice.
Enable valgrind support (y/n)? [n] n
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can use (or even trick) some perl functions into doing what it needs
instead of relying on (some) of its own functions. This might increase
chances that it compiles and works, but it could just as well result in
memory leaks, crashes or silent data corruption. It certainly does result
in slightly slower speed and higher memory consumption, though, so YOU
SHOULD ENABLE THIS OPTION ONLY AS A LAST RESORT.
Prefer perl functions over coro functions (y/n)? [n] n
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can use a simple JIT compiler to compile a part of the thread switch
function at runtime. On perls with windows process emulation (most!),
this results in a 50% speed improvement. On sane perls, the gain is much
less, usually around 5%. If you enable this option, then the JIT will
be enabled, on compatible operating systems and CPUs (currently only
x86/amd64 on certain unix clones). Otherwise, it will be disabled. It
should be safe to leave on - this setting is only here so you can switch
it off in case of problems.
Note that some broken kernels (often calling themselves "hardened") break
all JIT generation by manipulating some system calls. If you get bus
errors or segmentation faults immediately when the JIT is enabled but not
without, then note that disabling the JIT only fixes some symptoms, not
the underlying problem, and you might run into other problems later.
Try to use the JIT compiler, if available? [y] y
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro has experimental support for cloning states. This can be used
to implement a scheme-like call/cc. However, this doesn't add to the
expressiveness in general, and is likely perl-version specific (and perl
5.12 deliberately removed support for it). As such, it is disabled by
default. Enable it when you want to play around with it, but note that it
isn't supported, and unlikely ever will be. It exists mainly to prove that
it could be done - if only it were useful for something.
Implement Coro::State->clone method (y/n)? [n] n
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Writing MYMETA.yml and MYMETA.json
Writing MYMETA.yml and MYMETA.json
Writing MYMETA.yml and MYMETA.json
Generating a Unix-style Makefile
Writing Makefile for Coro
Writing MYMETA.yml and MYMETA.json
dh_auto_build
make -j3
make[1]: Entering directory '/build/reproducible-path/libcoro-perl-6.570'
make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/Coro'
cp Coro/Socket.pm blib/lib/Coro/Socket.pm
cp Coro/Storable.pm blib/lib/Coro/Storable.pm
cp Coro/Specific.pm blib/lib/Coro/Specific.pm
cp Coro/Timer.pm blib/lib/Coro/Timer.pm
cp Coro/BDB.pm blib/lib/Coro/BDB.pm
cp Coro/State.pm blib/lib/Coro/State.pm
cp Coro/Handle.pm blib/lib/Coro/Handle.pm
cp Coro/AIO.pm blib/lib/Coro/AIO.pm
cp Coro/Select.pm blib/lib/Coro/Select.pm
cp Coro.pm blib/lib/Coro.pm
cp Coro/jit-x86-unix.pl blib/lib/Coro/jit-x86-unix.pl
cp Coro/Channel.pm blib/lib/Coro/Channel.pm
cp Coro/LWP.pm blib/lib/Coro/LWP.pm
cp Coro/jit-amd64-unix.pl blib/lib/Coro/jit-amd64-unix.pl
cp Coro/RWLock.pm blib/lib/Coro/RWLock.pm
cp Coro/MakeMaker.pm blib/lib/Coro/MakeMaker.pm
cp Coro/CoroAPI.h blib/lib/Coro/CoroAPI.h
cp Coro/Signal.pm blib/lib/Coro/Signal.pm
cp Coro/Semaphore.pm blib/lib/Coro/Semaphore.pm
cp Coro/SemaphoreSet.pm blib/lib/Coro/SemaphoreSet.pm
cp Coro/Util.pm blib/lib/Coro/Util.pm
cp Coro/Debug.pm blib/lib/Coro/Debug.pm
cp Coro/AnyEvent.pm blib/lib/Coro/AnyEvent.pm
Running Mkbootstrap for State ()
"/usr/bin/perl" "/usr/share/perl/5.40.0/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' -typemap '/build/reproducible-path/libcoro-perl-6.570/Coro/typemap' State.xs > State.xsc
chmod 644 "State.bs"
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644
Skip ../blib/lib/Coro/jit-amd64-unix.pl (unchanged)
Skip ../blib/lib/Coro/Handle.pm (unchanged)
Skip ../blib/lib/Coro/Util.pm (unchanged)
Skip ../blib/lib/Coro/LWP.pm (unchanged)
Skip ../blib/lib/Coro/RWLock.pm (unchanged)
Skip ../blib/lib/Coro/Select.pm (unchanged)
Skip ../blib/lib/Coro/Channel.pm (unchanged)
Skip ../blib/lib/Coro/Debug.pm (unchanged)
Skip ../blib/lib/Coro/jit-x86-unix.pl (unchanged)
Skip ../blib/lib/Coro/AIO.pm (unchanged)
cp Intro.pod ../blib/lib/Coro/Intro.pod
Skip ../blib/lib/Coro/Signal.pm (unchanged)
Skip ../blib/lib/Coro/State.pm (unchanged)
Skip ../blib/lib/Coro/MakeMaker.pm (unchanged)
Skip ../blib/lib/Coro/Storable.pm (unchanged)
Skip ../blib/lib/Coro/BDB.pm (unchanged)
Skip ../blib/lib/Coro/Socket.pm (unchanged)
Skip ../blib/lib/Coro/AnyEvent.pm (unchanged)
Skip ../blib/lib/Coro/Timer.pm (unchanged)
Skip ../blib/lib/Coro/SemaphoreSet.pm (unchanged)
Skip ../blib/lib/Coro/Semaphore.pm (unchanged)
Skip ../blib/lib/Coro/Specific.pm (unchanged)
mv State.xsc State.c
arm-linux-gnueabihf-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -D_TIME_BITS=64 -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libcoro-perl-6.570=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.57\" -DXS_VERSION=\"6.57\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.40/CORE" -D_FORTIFY_SOURCE=0 -DCORO_SJLJ -DCORO_STACKSIZE=16384 -DCORO_GUARDPAGES=4 -DCORO_JIT=1 State.c
<command-line>: warning: "_FORTIFY_SOURCE" redefined
<command-line>: note: this is the location of the previous definition
rm -f ../blib/arch/auto/Coro/State/State.so
arm-linux-gnueabihf-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libcoro-perl-6.570=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong State.o -o ../blib/arch/auto/Coro/State/State.so \
\
chmod 755 ../blib/arch/auto/Coro/State/State.so
Manifying 20 pod documents
make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/Coro'
make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/Event'
Running Mkbootstrap for Event ()
"/usr/bin/perl" "/usr/share/perl/5.40.0/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' Event.xs > Event.xsc
chmod 644 "Event.bs"
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644
cp Event.pm ../blib/lib/Coro/Event.pm
mv Event.xsc Event.c
arm-linux-gnueabihf-gcc -c -I/usr/lib/arm-linux-gnueabihf/perl5/5.40/Event -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -D_TIME_BITS=64 -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libcoro-perl-6.570=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.57\" -DXS_VERSION=\"6.57\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.40/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 Event.c
In file included from Event.xs:8:
Event.xs: In function 'boot_Coro__Event':
/usr/lib/arm-linux-gnueabihf/perl5/5.40/Event/EventAPI.h:252:15: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
252 | GEventAPI = (struct EventAPI*) SvIV(sv); \
| ^
Event.xs:82:9: note: in expansion of macro 'I_EVENT_API'
82 | I_EVENT_API ("Coro::Event");
| ^~~~~~~~~~~
/usr/lib/arm-linux-gnueabihf/perl5/5.40/Event/EventAPI.h:254:11: warning: format '%d' expects argument of type 'int', but argument 2 has type 'I32' {aka 'long int'} [-Wformat=]
254 | croak("Event::API version mismatch (%d != %d) -- please recompile %s", \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
255 | GEventAPI->Ver, EventAPI_VERSION, YourName); \
| ~~~~~~~~~~~~~~
| |
| I32 {aka long int}
Event.xs:82:9: note: in expansion of macro 'I_EVENT_API'
82 | I_EVENT_API ("Coro::Event");
| ^~~~~~~~~~~
In file included from Event.xs:9:
../Coro/CoroAPI.h:122:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
122 | GCoroAPI = (struct CoroAPI*) SvIV (sv); \
| ^
Event.xs:83:9: note: in expansion of macro 'I_CORO_API'
83 | I_CORO_API ("Coro::Event");
| ^~~~~~~~~~
rm -f ../blib/arch/auto/Coro/Event/Event.so
arm-linux-gnueabihf-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libcoro-perl-6.570=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Event.o -o ../blib/arch/auto/Coro/Event/Event.so \
\
chmod 755 ../blib/arch/auto/Coro/Event/Event.so
Manifying 1 pod document
make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/Event'
make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/EV'
Running Mkbootstrap for EV ()
"/usr/bin/perl" "/usr/share/perl/5.40.0/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' EV.xs > EV.xsc
chmod 644 "EV.bs"
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644
cp EV.pm ../blib/lib/Coro/EV.pm
mv EV.xsc EV.c
arm-linux-gnueabihf-gcc -c -I/usr/lib/arm-linux-gnueabihf/perl5/5.40/EV -I/usr/lib/arm-linux-gnueabihf/perl5/5.40 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -D_TIME_BITS=64 -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libcoro-perl-6.570=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.57\" -DXS_VERSION=\"6.57\" -fPIC "-I/usr/lib/arm-linux-gnueabihf/perl/5.40/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 EV.c
In file included from EV.xs:9:
EV.xs: In function 'boot_Coro__EV':
/usr/lib/arm-linux-gnueabihf/perl5/5.40/EV/EVAPI.h:195:12: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
195 | GEVAPI = (struct EVAPI*) SvIV (sv); \
| ^
EV.xs:358:9: note: in expansion of macro 'I_EV_API'
358 | I_EV_API ("Coro::EV");
| ^~~~~~~~
In file included from EV.xs:10:
../Coro/CoroAPI.h:122:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
122 | GCoroAPI = (struct CoroAPI*) SvIV (sv); \
| ^
EV.xs:359:9: note: in expansion of macro 'I_CORO_API'
359 | I_CORO_API ("Coro::EV");
| ^~~~~~~~~~
rm -f ../blib/arch/auto/Coro/EV/EV.so
arm-linux-gnueabihf-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libcoro-perl-6.570=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong EV.o -o ../blib/arch/auto/Coro/EV/EV.so \
\
chmod 755 ../blib/arch/auto/Coro/EV/EV.so
Manifying 1 pod document
make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/EV'
Manifying 20 pod documents
make[1]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570'
dh_auto_test
make -j3 test TEST_VERBOSE=1
make[1]: Entering directory '/build/reproducible-path/libcoro-perl-6.570'
make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/Coro'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644
Manifying 20 pod documents
make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/Coro'
make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/Event'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644
Manifying 1 pod document
make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/Event'
make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/EV'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644
Manifying 1 pod document
make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/EV'
make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/Coro'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644
No tests defined for Coro::State extension.
make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/Coro'
make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/Event'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, '../blib/lib', '../blib/arch')" t/*.t
t/00_basic.t ....
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/01_unblock.t ..
1..12
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok
All tests successful.
Files=2, Tests=17, 1 wallclock secs ( 0.09 usr 0.01 sys + 0.32 cusr 0.11 csys = 0.53 CPU)
Result: PASS
make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/Event'
make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/EV'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, '../blib/lib', '../blib/arch')" t/*.t
t/00_basic.t ....
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/01_unblock.t ..
1..12
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok
All tests successful.
Files=2, Tests=17, 0 wallclock secs ( 0.09 usr 0.01 sys + 0.27 cusr 0.10 csys = 0.47 CPU)
Result: PASS
make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/EV'
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00_basic.t ..........
1..9
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok
t/01_process.t ........
1..13
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok
t/02_channel.t ........
1..19
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok 18
ok 19
ok
t/03_channel.t ........
1..10
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok
t/04_rwlock.t .........
1..25
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok 18
ok 19
ok 20
ok 21
ok 22
ok 23
ok 24
ok 25
ok
t/05_specific.t .......
1..8
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok
t/06_prio.t ...........
1..10
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok
t/07_eval.t ...........
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/08_join.t ...........
1..10
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok
t/10_bugs.t ...........
1..3
ok 1
ok 2
ok 3
ok
t/11_deadlock.t .......
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/12_exit.t ...........
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/13_diewarn.t ........
1..7
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok
t/14_load.t ...........
1..17
ok 1 # Coro::State ()
ok 2 # Coro ()
ok 3 # Coro::MakeMaker ()
ok 4 # Coro::Signal ()
ok 5 # Coro::Semaphore ()
ok 6 # Coro::SemaphoreSet ()
ok 7 # Coro::Channel ()
ok 8 # Coro::Specific ()
ok 9 # Coro::RWLock ()
ok 10 # Coro::AnyEvent ()
ok 11 # Coro::Timer ()
ok 12 # Coro::Util ()
ok 13 # Coro::Select ()
ok 14 # Coro::Handle ()
ok 15 # Coro::Socket ()
ok 16 # Coro::Storable ()
ok 17 # Coro::Debug ()
ok
t/15_semaphore.t ......
1..6
ok 1 # 998
ok 2
ok 3
ok 4
ok 5
ok 6
ok
t/16_signal.t .........
1..18
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok 18
ok
t/17_rouse.t ..........
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/18_winder.t .........
1..17
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok
t/19_handle.t .........
1..4
ok 1
ok 2
ok 3
ok 4
ok
t/20_mutual_cancel.t ..
1..10
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok
All tests successful.
Files=20, Tests=206, 3 wallclock secs ( 0.25 usr 0.04 sys + 1.74 cusr 0.18 csys = 2.21 CPU)
Result: PASS
make[1]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570'
create-stamp debian/debhelper-build-stamp
dh_prep
debian/rules override_dh_auto_install
make[1]: Entering directory '/build/reproducible-path/libcoro-perl-6.570'
dh_auto_install
make -j3 install DESTDIR=/build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570'
make[3]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/Coro'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644
Manifying 20 pod documents
make[3]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/Coro'
make[3]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/Event'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644
Manifying 1 pod document
make[3]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/Event'
make[3]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/EV'
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644
Manifying 1 pod document
make[3]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/EV'
Manifying 20 pod documents
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/auto/Coro/State/State.so
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/auto/Coro/Event/Event.so
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/auto/Coro/EV/EV.so
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro.pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/CoroAPI.h
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/Util.pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/Semaphore.pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/RWLock.pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/Event.pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/Debug.pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/AIO.pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/Channel.pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/BDB.pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/SemaphoreSet.pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/jit-x86-unix.pl
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/State.pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/Handle.pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/Intro.pod
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/Specific.pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/jit-amd64-unix.pl
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/EV.pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/Select.pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/Timer.pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/Storable.pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/MakeMaker.pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/Socket.pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/LWP.pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/Signal.pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/AnyEvent.pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Channel.3pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Intro.3pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Specific.3pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Socket.3pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::RWLock.3pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::State.3pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::BDB.3pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Handle.3pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Storable.3pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Timer.3pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::LWP.3pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Semaphore.3pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Signal.3pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Util.3pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Event.3pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::AIO.3pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Select.3pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::AnyEvent.3pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::SemaphoreSet.3pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Debug.3pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro.3pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::EV.3pm
Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::MakeMaker.3pm
make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570'
sed -i '1s|^#!/opt/bin/perl|#!/usr/bin/perl|' /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl//usr/lib/arm-linux-gnueabihf/perl5/5.40/Coro/*.pl
make[1]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570'
dh_installdocs
dh_installchangelogs
debian/rules override_dh_installexamples
make[1]: Entering directory '/build/reproducible-path/libcoro-perl-6.570'
dh_installexamples
sed -i '1s|^#!/opt/bin/perl|#!/usr/bin/perl|' /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/doc/libcoro-perl/examples/*
make[1]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570'
dh_installman
dh_perl
dh_link
dh_strip_nondeterminism
dh_compress
dh_fixperms
dh_missing
dh_dwz -a
dh_strip -a
dh_makeshlibs -a
dh_shlibdeps -a
dpkg-shlibdeps: warning: diversions involved - output may be incorrect
diversion by libc6 from: /lib/ld-linux-armhf.so.3
dpkg-shlibdeps: warning: diversions involved - output may be incorrect
diversion by libc6 to: /lib/ld-linux-armhf.so.3.usr-is-merged
dh_installdeb
dh_gencontrol
dh_md5sums
dh_builddeb
dpkg-deb: building package 'libcoro-perl-dbgsym' in '../libcoro-perl-dbgsym_6.570-3_armhf.deb'.
dpkg-deb: building package 'libcoro-perl' in '../libcoro-perl_6.570-3_armhf.deb'.
dpkg-genbuildinfo --build=binary -O../libcoro-perl_6.570-3_armhf.buildinfo
dpkg-genchanges --build=binary -O../libcoro-perl_6.570-3_armhf.changes
dpkg-genchanges: info: binary-only upload (no source code included)
dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
dpkg-genchanges: info: not including original source code in upload
I: copying local configuration
I: unmounting dev/ptmx filesystem
I: unmounting dev/pts filesystem
I: unmounting dev/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
I: removing directory /srv/workspace/pbuilder/5049 and its subdirectories
I: Current time: Sat Dec 7 12:55:00 -12 2024
I: pbuilder-time-stamp: 1733619300