Thu May 18 07:24:23 UTC 2023 I: starting to build jigit/bookworm/arm64 on jenkins on '2023-05-18 07:24' Thu May 18 07:24:23 UTC 2023 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_2/1798/console.log Thu May 18 07:24:23 UTC 2023 I: Downloading source for bookworm/jigit=1.22-3 --2023-05-18 07:24:23-- http://cdn-fastly.deb.debian.org/debian/pool/main/j/jigit/jigit_1.22-3.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1832 (1.8K) [text/prs.lines.tag] Saving to: ‘jigit_1.22-3.dsc’ 0K . 100% 89.0M=0s 2023-05-18 07:24:23 (89.0 MB/s) - ‘jigit_1.22-3.dsc’ saved [1832/1832] Thu May 18 07:24:23 UTC 2023 I: jigit_1.22-3.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: jigit Binary: jigit, libjte2, libjte-dev Architecture: any Version: 1.22-3 Maintainer: Steve McIntyre <93sam@debian.org> Homepage: https://www.einval.com/~steve/software/JTE/ Standards-Version: 4.3.0 Build-Depends: debhelper (>= 10), zlib1g-dev, libbz2-dev Package-List: jigit deb utils optional arch=any libjte-dev deb libdevel optional arch=any libjte2 deb libs optional arch=any Checksums-Sha1: 4be1474a9493271f5a1fb99a2dae050338d72c83 307884 jigit_1.22.orig.tar.xz 10e43c6d33ee64a5ce2ba00d0e9bce68f4551cbf 4848 jigit_1.22-3.debian.tar.xz Checksums-Sha256: 8a1da3fb7b817174c6c19d71ede19a4b8d0ae433fc5e967d33abf74b545f9954 307884 jigit_1.22.orig.tar.xz 2448b3baf58d2dc91147f619899e4734544e26bf75940deebecdf169b793b844 4848 jigit_1.22-3.debian.tar.xz Files: faea58b814646ab06f11b33555fe30f2 307884 jigit_1.22.orig.tar.xz 21d1a4d9d37a136a0c0d0c44635e9a2e 4848 jigit_1.22-3.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQJFBAEBCAAvFiEEzrtSMB1hfpEDkP4WWHl5VzRCaE4FAl3qqDQRHDkzc2FtQGRl Ymlhbi5vcmcACgkQWHl5VzRCaE7wfg/9Huk7btmWwdn5op9FHNKRCONsqu4TvhAx 3bv/G2v5Tfm/VoRuMC0JURKit+oXfHF2l9cWL1BVKH3PzCYEZn+pG0MYswpfCZu9 LLeFRTrtVPVdDHqa87L9gD0K1M7zDgW7vYf/rZt0aWr3LBKJLEGYd7qqXIbS1rcv CQHEO1DrX6KddyjTN2B9O3S63PAHXa5lqqmxqhy3CY3Jdd3fssJFlAjLfrP2nHGP IMCo3zdrvy1BV0opNSF+FOgO2fcojyDRKave6Olpn7/EE7/1OOxujTDX1UmkKLPx 2Ud0TPTr8PgxmaiuttPPSaHT0GgrwHpWROKTAXGz8WEs7977Hq0pCjTJgSoB/AMW YQ5qhbjKyq1Z7277oSLMukn1fYlCsxVNqqqRyw4iYw4STBqvQ76KAX8lF6N8di07 XZ83JVTDRIwbU3u3IK6uV90tvHOxpixw3bIEjd2ICP2VRrqpUm+lf9X1t44NdsOt G4X5tS5Tm89WEh5XRmKmAAcFYRIurLJQixo6qWZcclRquIjt+uCyaXQepkUQ32kW Vkw3R+Jtp7Mm2CkcqABmCJaEdBdTCauPqRKPEGN/Kt37YeaHn5eRqjbFsuoiV3r3 CWkOGnzR0SkKWAAJROq85jOyFeuvIcGUWGq936HFzNSDXYpzZc6gxmm033k/+O3N E2PP9ku+Oqs= =Jwpi -----END PGP SIGNATURE----- Thu May 18 07:24:23 UTC 2023 I: Checking whether the package is not for us Thu May 18 07:24:23 UTC 2023 I: Starting 1st build on remote node codethink9-arm64.debian.net. Thu May 18 07:24:23 UTC 2023 I: Preparing to do remote build '1' on codethink9-arm64.debian.net. Thu May 18 07:26:15 UTC 2023 I: Deleting $TMPDIR on codethink9-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Wed Jun 19 01:47:26 -12 2024 I: pbuilder-time-stamp: 1718804846 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bookworm-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [jigit_1.22-3.dsc] I: copying [./jigit_1.22.orig.tar.xz] I: copying [./jigit_1.22-3.debian.tar.xz] I: Extracting source gpgv: Signature made Fri Dec 6 07:12:52 2019 -12 gpgv: using RSA key CEBB52301D617E910390FE16587979573442684E gpgv: issuer "93sam@debian.org" gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./jigit_1.22-3.dsc: no acceptable signature found dpkg-source: info: extracting jigit in jigit-1.22 dpkg-source: info: unpacking jigit_1.22.orig.tar.xz dpkg-source: info: unpacking jigit_1.22-3.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/31345/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=8 ' DISTRIBUTION='bookworm' HOME='/var/lib/jenkins' HOST_ARCH='arm64' IFS=' ' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='31345' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.ODSrjC4r/pbuilderrc_qDcs --distribution bookworm --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bookworm-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.ODSrjC4r/b1 --logfile b1/build.log jigit_1.22-3.dsc' SUDO_GID='117' SUDO_UID='110' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' USERNAME='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.16:3128' I: uname -a Linux codethink9-arm64 4.15.0-211-generic #222-Ubuntu SMP Tue Apr 18 18:58:27 UTC 2023 aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Jun 16 04:48 /bin -> usr/bin I: user script /srv/workspace/pbuilder/31345/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 10), zlib1g-dev, libbz2-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19616 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 10); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on zlib1g-dev; however: Package zlib1g-dev is not installed. pbuilder-satisfydepends-dummy depends on libbz2-dev; however: Package libbz2-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbz2-dev{a} libdebhelper-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1{a} libpipeline1{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: bzip2-doc curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 32 newly installed, 0 to remove and 0 not upgraded. Need to get 19.3 MB of archives. After unpacking 75.8 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bookworm/main arm64 sensible-utils all 0.0.17+nmu1 [19.0 kB] Get: 2 http://deb.debian.org/debian bookworm/main arm64 libmagic-mgc arm64 1:5.44-3 [305 kB] Get: 3 http://deb.debian.org/debian bookworm/main arm64 libmagic1 arm64 1:5.44-3 [98.5 kB] Get: 4 http://deb.debian.org/debian bookworm/main arm64 file arm64 1:5.44-3 [42.5 kB] Get: 5 http://deb.debian.org/debian bookworm/main arm64 gettext-base arm64 0.21-12 [159 kB] Get: 6 http://deb.debian.org/debian bookworm/main arm64 libuchardet0 arm64 0.0.7-1 [67.9 kB] Get: 7 http://deb.debian.org/debian bookworm/main arm64 groff-base arm64 1.22.4-10 [861 kB] Get: 8 http://deb.debian.org/debian bookworm/main arm64 bsdextrautils arm64 2.38.1-5+b1 [86.9 kB] Get: 9 http://deb.debian.org/debian bookworm/main arm64 libpipeline1 arm64 1.5.7-1 [36.4 kB] Get: 10 http://deb.debian.org/debian bookworm/main arm64 man-db arm64 2.11.2-2 [1369 kB] Get: 11 http://deb.debian.org/debian bookworm/main arm64 m4 arm64 1.4.19-3 [276 kB] Get: 12 http://deb.debian.org/debian bookworm/main arm64 autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian bookworm/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian bookworm/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian bookworm/main arm64 autopoint all 0.21-12 [495 kB] Get: 16 http://deb.debian.org/debian bookworm/main arm64 libdebhelper-perl all 13.11.4 [81.2 kB] Get: 17 http://deb.debian.org/debian bookworm/main arm64 libtool all 2.4.7-5 [517 kB] Get: 18 http://deb.debian.org/debian bookworm/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian bookworm/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian bookworm/main arm64 libsub-override-perl all 0.09-4 [9304 B] Get: 21 http://deb.debian.org/debian bookworm/main arm64 libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 22 http://deb.debian.org/debian bookworm/main arm64 dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 23 http://deb.debian.org/debian bookworm/main arm64 libelf1 arm64 0.188-2.1 [173 kB] Get: 24 http://deb.debian.org/debian bookworm/main arm64 dwz arm64 0.15-1 [101 kB] Get: 25 http://deb.debian.org/debian bookworm/main arm64 libicu72 arm64 72.1-3 [9204 kB] Get: 26 http://deb.debian.org/debian bookworm/main arm64 libxml2 arm64 2.9.14+dfsg-1.2 [620 kB] Get: 27 http://deb.debian.org/debian bookworm/main arm64 gettext arm64 0.21-12 [1248 kB] Get: 28 http://deb.debian.org/debian bookworm/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian bookworm/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian bookworm/main arm64 debhelper all 13.11.4 [942 kB] Get: 31 http://deb.debian.org/debian bookworm/main arm64 libbz2-dev arm64 1.0.8-5+b1 [31.5 kB] Get: 32 http://deb.debian.org/debian bookworm/main arm64 zlib1g-dev arm64 1:1.2.13.dfsg-1 [913 kB] Fetched 19.3 MB in 1s (37.4 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19616 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.17+nmu1_all.deb ... Unpacking sensible-utils (0.0.17+nmu1) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.44-3_arm64.deb ... Unpacking libmagic-mgc (1:5.44-3) ... Selecting previously unselected package libmagic1:arm64. Preparing to unpack .../02-libmagic1_1%3a5.44-3_arm64.deb ... Unpacking libmagic1:arm64 (1:5.44-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.44-3_arm64.deb ... Unpacking file (1:5.44-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-12_arm64.deb ... Unpacking gettext-base (0.21-12) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.7-1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.22.4-10_arm64.deb ... Unpacking groff-base (1.22.4-10) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.38.1-5+b1_arm64.deb ... Unpacking bsdextrautils (2.38.1-5+b1) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.7-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.7-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.11.2-2_arm64.deb ... Unpacking man-db (2.11.2-2) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-3_arm64.deb ... Unpacking m4 (1.4.19-3) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-12_all.deb ... Unpacking autopoint (0.21-12) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.11.4_all.deb ... Unpacking libdebhelper-perl (13.11.4) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-5_all.deb ... Unpacking libtool (2.4.7-5) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../19-libsub-override-perl_0.09-4_all.deb ... Unpacking libsub-override-perl (0.09-4) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1:arm64. Preparing to unpack .../22-libelf1_0.188-2.1_arm64.deb ... Unpacking libelf1:arm64 (0.188-2.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1_arm64.deb ... Unpacking dwz (0.15-1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../24-libicu72_72.1-3_arm64.deb ... Unpacking libicu72:arm64 (72.1-3) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../25-libxml2_2.9.14+dfsg-1.2_arm64.deb ... Unpacking libxml2:arm64 (2.9.14+dfsg-1.2) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.21-12_arm64.deb ... Unpacking gettext (0.21-12) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.11.4_all.deb ... Unpacking debhelper (13.11.4) ... Selecting previously unselected package libbz2-dev:arm64. Preparing to unpack .../30-libbz2-dev_1.0.8-5+b1_arm64.deb ... Unpacking libbz2-dev:arm64 (1.0.8-5+b1) ... Selecting previously unselected package zlib1g-dev:arm64. Preparing to unpack .../31-zlib1g-dev_1%3a1.2.13.dfsg-1_arm64.deb ... Unpacking zlib1g-dev:arm64 (1:1.2.13.dfsg-1) ... Setting up libpipeline1:arm64 (1.5.7-1) ... Setting up libicu72:arm64 (72.1-3) ... Setting up bsdextrautils (2.38.1-5+b1) ... Setting up libmagic-mgc (1:5.44-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.11.4) ... Setting up libmagic1:arm64 (1:5.44-3) ... Setting up gettext-base (0.21-12) ... Setting up m4 (1.4.19-3) ... Setting up file (1:5.44-3) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.21-12) ... Setting up autoconf (2.71-3) ... Setting up zlib1g-dev:arm64 (1:1.2.13.dfsg-1) ... Setting up sensible-utils (0.0.17+nmu1) ... Setting up libuchardet0:arm64 (0.0.7-1) ... Setting up libsub-override-perl (0.09-4) ... Setting up libelf1:arm64 (0.188-2.1) ... Setting up libxml2:arm64 (2.9.14+dfsg-1.2) ... Setting up libbz2-dev:arm64 (1.0.8-5+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up gettext (0.21-12) ... Setting up libtool (2.4.7-5) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up dwz (0.15-1) ... Setting up groff-base (1.22.4-10) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.11.2-2) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.11.4) ... Processing triggers for libc-bin (2.36-9) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.31-1.2). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/jigit-1.22/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../jigit_1.22-3_source.changes dpkg-buildpackage: info: source package jigit dpkg-buildpackage: info: source version 1.22-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Steve McIntyre <93sam@debian.org> dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 fakeroot debian/rules clean dh_testdir dh_testroot rm -f build-stamp # Add here commands to clean up after the build process. /usr/bin/make clean make[1]: Entering directory '/build/jigit-1.22' rm -f *.o jigdump jigit-mkimage jigsum jigsum-sha256 rsyncsum lib extract-data parallel-sums *~ build-stamp make -C libjte clean make[2]: Entering directory '/build/jigit-1.22/libjte' make[2]: *** No rule to make target 'clean'. Stop. make[2]: Leaving directory '/build/jigit-1.22/libjte' make[1]: [Makefile:40: clean] Error 2 (ignored) make[1]: Leaving directory '/build/jigit-1.22' /usr/bin/make distclean make[1]: Entering directory '/build/jigit-1.22' rm -f *.o jigdump jigit-mkimage jigsum jigsum-sha256 rsyncsum lib extract-data parallel-sums *~ build-stamp make -C libjte clean make[2]: Entering directory '/build/jigit-1.22/libjte' make[2]: *** No rule to make target 'clean'. Stop. make[2]: Leaving directory '/build/jigit-1.22/libjte' make[1]: [Makefile:40: clean] Error 2 (ignored) make -C libjte distclean make[2]: Entering directory '/build/jigit-1.22/libjte' make[2]: *** No rule to make target 'distclean'. Stop. make[2]: Leaving directory '/build/jigit-1.22/libjte' make[1]: [Makefile:43: distclean] Error 2 (ignored) make[1]: Leaving directory '/build/jigit-1.22' dh_autoreconf_clean dh_clean debian/rules build dh_testdir # Add here commands to compile the package. AUTOMAKE='automake --foreign' dh_autoreconf libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, './'. libtoolize: copying file './/libtool.m4' libtoolize: copying file './/ltoptions.m4' libtoolize: copying file './/ltsugar.m4' libtoolize: copying file './/ltversion.m4' libtoolize: copying file './/lt~obsolete.m4' configure.ac:68: warning: The macro `AC_PROG_LIBTOOL' is obsolete. configure.ac:68: You should run autoupdate. libtool.m4:100: AC_PROG_LIBTOOL is expanded from... configure.ac:68: the top level configure.ac:156: warning: The macro `AC_TRY_LINK' is obsolete. configure.ac:156: You should run autoupdate. ./lib/autoconf/general.m4:2920: AC_TRY_LINK is expanded from... acinclude.m4:43: LIBJTE_ASSERT_VERS_LIBS is expanded from... configure.ac:156: the top level configure.ac:183: warning: AC_C_BIGENDIAN should be used with AC_CONFIG_HEADERS configure.ac:55: installing './compile' configure.ac:16: installing './missing' Makefile.am: installing './depcomp' cd libjte && ./configure --prefix=/usr checking build system type... aarch64-unknown-linux-gnu checking host system type... aarch64-unknown-linux-gnu checking target system type... aarch64-unknown-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether to enable maintainer-specific portions of Makefiles... no checking whether make supports the include directive... yes (GNU style) checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... gcc3 checking for an ANSI C-conforming const... yes checking for inline... inline checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking whether byte ordering is bigendian... no checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking for _LARGEFILE_SOURCE value needed for large files... no checking for fseeko... yes checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert aarch64-unknown-linux-gnu file names to aarch64-unknown-linux-gnu format... func_convert_file_noop checking how to convert aarch64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for file... file checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for fcntl.h... yes checking for inttypes.h... (cached) yes checking for limits.h... yes checking for stddef.h... yes checking for stdint.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for unistd.h... (cached) yes checking for int16_t... yes checking for int32_t... yes checking for int8_t... yes checking for off_t... yes checking for size_t... yes checking for uint16_t... yes checking for uint32_t... yes checking for uint64_t... yes checking for uint8_t... yes checking for GNU libc compatible malloc... yes checking for memset... yes checking for regcomp... yes checking for strcasecmp... yes checking for strdup... yes checking for strerror... yes checking for strncasecmp... yes checking for strndup... yes checking for strstr... yes checking target operating system... linux checking for overridden pkgconfig directory path... no checking for bzlib.h... yes checking for BZ2_bzCompressInit in -lbz2... yes checking for pthread.h... yes checking for pthread_create in -lpthread... yes enabled strict symbol encapsulation checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating version.h config.status: creating libjte-2.pc config.status: executing depfiles commands config.status: executing libtool commands /usr/bin/make make[1]: Entering directory '/build/jigit-1.22' cc -g -O2 -ffile-prefix-map=/build/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o jigdump.o jigdump.c cc -g -O2 -ffile-prefix-map=/build/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o md5.o md5.c cc -g -O2 -ffile-prefix-map=/build/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o jig-base64.o jig-base64.c cc -Wl,-z,relro -o jigdump jigdump.o md5.o jig-base64.o cc -g -O2 -ffile-prefix-map=/build/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o mkimage.o mkimage.c mkimage.c: In function 'parse_template_file': mkimage.c:1004:5: warning: ignoring return value of 'fread' declared with attribute 'warn_unused_result' [-Wunused-result] 1004 | fread(buf, 6, 1, file); | ^~~~~~~~~~~~~~~~~~~~~~ mkimage.c:1258:21: warning: pointer 'file' may be used after 'fclose' [-Wuse-after-free] 1258 | fclose(file); | ^~~~~~~~~~~~ mkimage.c:1236:5: note: call to 'fclose' here 1236 | fclose(file); | ^~~~~~~~~~~~ mkimage.c:1277:21: warning: pointer 'file' may be used after 'fclose' [-Wuse-after-free] 1277 | fclose(file); | ^~~~~~~~~~~~ mkimage.c:1236:5: note: call to 'fclose' here 1236 | fclose(file); | ^~~~~~~~~~~~ cc -g -O2 -ffile-prefix-map=/build/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o endian.o endian.c make -C libjte make[2]: Entering directory '/build/jigit-1.22/libjte' gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Ilibjte -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -g -pedantic -Wall -DDEBUG -MT test/demo-demo.o -MD -MP -MF test/.deps/demo-demo.Tpo -c -o test/demo-demo.o `test -f 'test/demo.c' || echo './'`test/demo.c mv -f test/.deps/demo-demo.Tpo test/.deps/demo-demo.Po /bin/bash ./libtool --silent --tag=CC --mode=compile gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -ffile-prefix-map=/build/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -g -pedantic -Wall -DDEBUG -MT libjte_libjte_la-checksum.lo -MD -MP -MF .deps/libjte_libjte_la-checksum.Tpo -c -o libjte_libjte_la-checksum.lo `test -f 'checksum.c' || echo './'`checksum.c mv -f .deps/libjte_libjte_la-checksum.Tpo .deps/libjte_libjte_la-checksum.Plo /bin/bash ./libtool --silent --tag=CC --mode=compile gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -ffile-prefix-map=/build/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -g -pedantic -Wall -DDEBUG -MT libjte_libjte_la-endian.lo -MD -MP -MF .deps/libjte_libjte_la-endian.Tpo -c -o libjte_libjte_la-endian.lo `test -f 'endian.c' || echo './'`endian.c mv -f .deps/libjte_libjte_la-endian.Tpo .deps/libjte_libjte_la-endian.Plo /bin/bash ./libtool --silent --tag=CC --mode=compile gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -ffile-prefix-map=/build/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -g -pedantic -Wall -DDEBUG -MT libjte_libjte_la-jte.lo -MD -MP -MF .deps/libjte_libjte_la-jte.Tpo -c -o libjte_libjte_la-jte.lo `test -f 'jte.c' || echo './'`jte.c mv -f .deps/libjte_libjte_la-jte.Tpo .deps/libjte_libjte_la-jte.Plo /bin/bash ./libtool --silent --tag=CC --mode=compile gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -ffile-prefix-map=/build/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -g -pedantic -Wall -DDEBUG -MT libjte_libjte_la-libjte.lo -MD -MP -MF .deps/libjte_libjte_la-libjte.Tpo -c -o libjte_libjte_la-libjte.lo `test -f 'libjte.c' || echo './'`libjte.c mv -f .deps/libjte_libjte_la-libjte.Tpo .deps/libjte_libjte_la-libjte.Plo /bin/bash ./libtool --silent --tag=CC --mode=compile gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -ffile-prefix-map=/build/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -g -pedantic -Wall -DDEBUG -MT libjte_libjte_la-md5.lo -MD -MP -MF .deps/libjte_libjte_la-md5.Tpo -c -o libjte_libjte_la-md5.lo `test -f 'md5.c' || echo './'`md5.c mv -f .deps/libjte_libjte_la-md5.Tpo .deps/libjte_libjte_la-md5.Plo /bin/bash ./libtool --silent --tag=CC --mode=compile gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -ffile-prefix-map=/build/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -g -pedantic -Wall -DDEBUG -MT libjte_libjte_la-rsync.lo -MD -MP -MF .deps/libjte_libjte_la-rsync.Tpo -c -o libjte_libjte_la-rsync.lo `test -f 'rsync.c' || echo './'`rsync.c mv -f .deps/libjte_libjte_la-rsync.Tpo .deps/libjte_libjte_la-rsync.Plo /bin/bash ./libtool --silent --tag=CC --mode=compile gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -ffile-prefix-map=/build/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -g -pedantic -Wall -DDEBUG -MT libjte_libjte_la-sha1.lo -MD -MP -MF .deps/libjte_libjte_la-sha1.Tpo -c -o libjte_libjte_la-sha1.lo `test -f 'sha1.c' || echo './'`sha1.c mv -f .deps/libjte_libjte_la-sha1.Tpo .deps/libjte_libjte_la-sha1.Plo /bin/bash ./libtool --silent --tag=CC --mode=compile gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -ffile-prefix-map=/build/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -g -pedantic -Wall -DDEBUG -MT libjte_libjte_la-sha256.lo -MD -MP -MF .deps/libjte_libjte_la-sha256.Tpo -c -o libjte_libjte_la-sha256.lo `test -f 'sha256.c' || echo './'`sha256.c mv -f .deps/libjte_libjte_la-sha256.Tpo .deps/libjte_libjte_la-sha256.Plo /bin/bash ./libtool --silent --tag=CC --mode=compile gcc -DPACKAGE_NAME=\"libjte\" -DPACKAGE_TARNAME=\"libjte\" -DPACKAGE_VERSION=\"2.0.0\" -DPACKAGE_STRING=\"libjte\ 2.0.0\" -DPACKAGE_BUGREPORT=\"https://www.einval.com/\~steve/software/JTE/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libjte\" -DVERSION=\"2.0.0\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -DHAVE_FSEEKO=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_FCNTL_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STDDEF_H=1 -DHAVE_STDINT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_UNISTD_H=1 -DHAVE_MALLOC=1 -DHAVE_MEMSET=1 -DHAVE_REGCOMP=1 -DHAVE_STRCASECMP=1 -DHAVE_STRDUP=1 -DHAVE_STRERROR=1 -DHAVE_STRNCASECMP=1 -DHAVE_STRNDUP=1 -DHAVE_STRSTR=1 -D_GNU_SOURCE=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBPTHREAD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -ffile-prefix-map=/build/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -g -pedantic -Wall -DDEBUG -MT libjte_libjte_la-sha512.lo -MD -MP -MF .deps/libjte_libjte_la-sha512.Tpo -c -o libjte_libjte_la-sha512.lo `test -f 'sha512.c' || echo './'`sha512.c mv -f .deps/libjte_libjte_la-sha512.Tpo .deps/libjte_libjte_la-sha512.Plo /bin/bash ./libtool --silent --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -g -pedantic -Wall -DDEBUG -Wl,-z,relro -Wl,--version-script=libjte.ver -o test/demo test/demo-demo.o libjte_libjte_la-checksum.lo libjte_libjte_la-endian.lo libjte_libjte_la-jte.lo libjte_libjte_la-libjte.lo libjte_libjte_la-md5.lo libjte_libjte_la-rsync.lo libjte_libjte_la-sha1.lo libjte_libjte_la-sha256.lo libjte_libjte_la-sha512.lo -lz -lpthread -lbz2 /bin/bash ./libtool --silent --tag=CC --mode=link gcc -DLIBJTE_WITH_ZLIB -DLIBJTE_WITH_LIBBZ2 -DTHREADED_CHECKSUMS -g -O2 -ffile-prefix-map=/build/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -std=c99 -g -pedantic -Wall -DDEBUG -version-info 2:0:0 -Wl,-z,relro -Wl,--version-script=libjte.ver -o libjte/libjte.la -rpath /usr/lib libjte_libjte_la-checksum.lo libjte_libjte_la-endian.lo libjte_libjte_la-jte.lo libjte_libjte_la-libjte.lo libjte_libjte_la-md5.lo libjte_libjte_la-rsync.lo libjte_libjte_la-sha1.lo libjte_libjte_la-sha256.lo libjte_libjte_la-sha512.lo -lz -lpthread -lbz2 make[2]: Leaving directory '/build/jigit-1.22/libjte' cc -g -O2 -ffile-prefix-map=/build/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o uncompress.o uncompress.c uncompress.c: In function 'read_data_block': uncompress.c:109:9: warning: ignoring return value of 'fread' declared with attribute 'warn_unused_result' [-Wunused-result] 109 | fread(inbuf, sizeof(inbuf), 1, template_file); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ uncompress.c:130:5: warning: ignoring return value of 'fread' declared with attribute 'warn_unused_result' [-Wunused-result] 130 | fread(inbuf, 16, 1, template_file); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc -Wl,-z,relro -o jigit-mkimage mkimage.o endian.o md5.o libjte/libjte_libjte_la-sha256.o uncompress.o jig-base64.o -lz -lbz2 cc -g -O2 -ffile-prefix-map=/build/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o jigsum.o jigsum.c cc -Wl,-z,relro -o jigsum jigsum.o md5.o jig-base64.o cc -g -O2 -ffile-prefix-map=/build/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o jigsum-sha256.o jigsum-sha256.c cc -Wl,-z,relro -o jigsum-sha256 jigsum-sha256.o libjte/libjte_libjte_la-sha256.o jig-base64.o cc -g -O2 -ffile-prefix-map=/build/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o rsync.o rsync.c cc -Wl,-z,relro -o rsyncsum rsync.o md5.o jig-base64.o cc -g -O2 -ffile-prefix-map=/build/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o extract-data.o extract-data.c cc -Wl,-z,relro -o extract-data extract-data.o endian.o uncompress.o -lz -lbz2 cc -g -O2 -ffile-prefix-map=/build/jigit-1.22=. -fstack-protector-strong -Wformat -Werror=format-security -g -Wall -I libjte -pthread -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Wdate-time -D_FORTIFY_SOURCE=2 -c -o parallel-sums.o parallel-sums.c cc -pthread -Wl,-z,relro -o parallel-sums parallel-sums.o libjte/libjte_libjte_la-checksum.o libjte/libjte_libjte_la-md5.o libjte/libjte_libjte_la-sha1.o libjte/libjte_libjte_la-sha256.o libjte/libjte_libjte_la-sha512.o -lpthread make[1]: Leaving directory '/build/jigit-1.22' touch build-stamp fakeroot debian/rules binary dh_testdir dh_testroot dh_prep dh_installdirs dh_installdirs -plibjte-dev /usr/lib/aarch64-linux-gnu/pkgconfig # Add here commands to install the package into debian/ #/usr/bin/make prefix=`pwd`/debian/`dh_listpackages`/usr install dh_install -pjigit jigit-mkimage jigdump usr/bin dh_install -pjigit jigsum jigsum-sha256 parallel-sums usr/bin dh_install -pjigit libjte/bin/jigdo-gen-checksum-list usr/bin dh_install -pjigit mkjigsnap usr/sbin dh_install -pjigit *.1 usr/share/man/man1 dh_install -pjigit mkjigsnap.8 usr/share/man/man8 dh_install -plibjte2 libjte/libjte/.libs/libjte.so.2.0.0 usr/lib/aarch64-linux-gnu dh_install -plibjte2 libjte/libjte/.libs/libjte.so.2 usr/lib/aarch64-linux-gnu dh_install -plibjte-dev libjte/libjte/.libs/libjte.a usr/lib/aarch64-linux-gnu dh_install -plibjte-dev libjte/libjte/.libs/libjte.so usr/lib/aarch64-linux-gnu dh_install -plibjte-dev libjte/libjte.h usr/include/libjte dh_install -plibjte-dev libjte/libjte-2.pc usr/lib/aarch64-linux-gnu/pkgconfig dh_testdir dh_testroot dh_installchangelogs dh_installdocs dh_installexamples dh_installman dh_makeshlibs dh_link dh_strip dh_compress dh_fixperms dh_installdeb dh_shlibdeps dh_gencontrol dpkg-gencontrol: warning: Depends field of package libjte-dev: substitution variable ${shlibs:Depends} used, but is not defined dh_md5sums dh_builddeb dpkg-deb: building package 'libjte-dev' in '../libjte-dev_1.22-3_arm64.deb'. dpkg-deb: building package 'jigit' in '../jigit_1.22-3_arm64.deb'. dpkg-deb: building package 'libjte2' in '../libjte2_1.22-3_arm64.deb'. dpkg-deb: building package 'libjte2-dbgsym' in '../libjte2-dbgsym_1.22-3_arm64.deb'. dpkg-deb: building package 'jigit-dbgsym' in '../jigit-dbgsym_1.22-3_arm64.deb'. dpkg-genbuildinfo --build=binary -O../jigit_1.22-3_arm64.buildinfo dpkg-genchanges --build=binary -O../jigit_1.22-3_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/31345 and its subdirectories I: Current time: Wed Jun 19 01:49:13 -12 2024 I: pbuilder-time-stamp: 1718804953 Thu May 18 07:26:16 UTC 2023 I: 1st build successful. Starting 2nd build on remote node codethink12-arm64.debian.net. Thu May 18 07:26:16 UTC 2023 I: Preparing to do remote build '2' on codethink12-arm64.debian.net. Thu May 18 07:28:18 UTC 2023 I: Deleting $TMPDIR on codethink12-arm64.debian.net. Thu May 18 07:28:19 UTC 2023 I: jigit_1.22-3_arm64.changes: Format: 1.8 Date: Fri, 06 Dec 2019 19:08:56 +0000 Source: jigit Binary: jigit jigit-dbgsym libjte-dev libjte2 libjte2-dbgsym Architecture: arm64 Version: 1.22-3 Distribution: unstable Urgency: medium Maintainer: Steve McIntyre <93sam@debian.org> Changed-By: Steve McIntyre <93sam@debian.org> Description: jigit - tools for working with jigdo files libjte-dev - Jigdo Template Export - development libjte2 - Jigdo Template Export - runtime library Closes: 812946 Changes: jigit (1.22-3) unstable; urgency=medium . * Multiarchify the library packages. Closes: #812946. Thanks to Matthias Klose for the patch, via Ubuntu. * Fix up dates for old changelog entries (oops!) Checksums-Sha1: 705ef4b778dacaaaa0533c8b37742d9fddd821e9 113168 jigit-dbgsym_1.22-3_arm64.deb a97e553264773213718b7b5ba6d694bb5a3ca287 5918 jigit_1.22-3_arm64.buildinfo f75cbca5bf861ddb9593326cfd173cdebdc1c1af 49964 jigit_1.22-3_arm64.deb 4901f36451b4e98f02ea2f40154fd44bee270e7f 34776 libjte-dev_1.22-3_arm64.deb 0663e2e3b0e9a8e3905841ce3cc1b28424cca2e2 63680 libjte2-dbgsym_1.22-3_arm64.deb eebb8dd6ed252b8b618cfa5019987526abd35427 27604 libjte2_1.22-3_arm64.deb Checksums-Sha256: cdc07cee3b2d51dc8024c41650f676595bf1c391159062ae7e2feaa69ad6eae2 113168 jigit-dbgsym_1.22-3_arm64.deb 75b30057dc210e4458fa8e33f73b6917d2e2a7398ffd43722f076156deb782e4 5918 jigit_1.22-3_arm64.buildinfo a34b5e98c12c5c5579dea4c283ae79a0b5ce5a5410f05ce5f2db367a369ed863 49964 jigit_1.22-3_arm64.deb b59c2776489d0644dbda0141b020d1681da5cea172085650d4d6a591fa27ff02 34776 libjte-dev_1.22-3_arm64.deb b6b69e782524e4f74db04990bc9a39ac7296002eed805a16b81f33fbd01f4538 63680 libjte2-dbgsym_1.22-3_arm64.deb 08eda89d64295e2a27256d62d10a2488eefa475f13d55219b11555c717e72735 27604 libjte2_1.22-3_arm64.deb Files: 876b8ca676558cba8439191ced7327a1 113168 debug optional jigit-dbgsym_1.22-3_arm64.deb 4be1a0afac1e64a1be4308c9faa2bbd2 5918 utils optional jigit_1.22-3_arm64.buildinfo 5c0b69dc851a52080e6c6477a76a9861 49964 utils optional jigit_1.22-3_arm64.deb d77d59f5b709c203b397d6bf89096c8d 34776 libdevel optional libjte-dev_1.22-3_arm64.deb a56466bf547be6793e62c9b3171627fd 63680 debug optional libjte2-dbgsym_1.22-3_arm64.deb 98a91e2389b0ea6940be19f0e43b022e 27604 libs optional libjte2_1.22-3_arm64.deb Thu May 18 07:28:20 UTC 2023 I: diffoscope 242 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.ODSrjC4r/jigit_1.22-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.ODSrjC4r/jigit_1.22-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.ODSrjC4r/jigit_1.22-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.ODSrjC4r/b1/jigit_1.22-3_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.ODSrjC4r/b2/jigit_1.22-3_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.302s) 0.302s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.019s) 0.019s 12 calls diffoscope.comparators.binary.FilesystemFile 0.000s 10 calls abc.DotChangesFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Thu May 18 07:28:21 UTC 2023 I: diffoscope 242 found no differences in the changes files, and a .buildinfo file also exists. Thu May 18 07:28:21 UTC 2023 I: jigit from bookworm built successfully and reproducibly on arm64. Thu May 18 07:28:22 UTC 2023 I: Submitting .buildinfo files to external archives: Thu May 18 07:28:22 UTC 2023 I: Submitting 8.0K b1/jigit_1.22-3_arm64.buildinfo.asc Thu May 18 07:28:23 UTC 2023 I: Submitting 8.0K b2/jigit_1.22-3_arm64.buildinfo.asc Thu May 18 07:28:24 UTC 2023 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Thu May 18 07:28:24 UTC 2023 I: Done submitting .buildinfo files. Thu May 18 07:28:24 UTC 2023 I: Removing signed jigit_1.22-3_arm64.buildinfo.asc files: removed './b1/jigit_1.22-3_arm64.buildinfo.asc' removed './b2/jigit_1.22-3_arm64.buildinfo.asc'