Fri May 5 12:36:50 UTC 2023 I: starting to build easyh10/bookworm/armhf on jenkins on '2023-05-05 12:36'
Fri May 5 12:36:50 UTC 2023 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_44/969/console.log
Fri May 5 12:36:50 UTC 2023 I: Downloading source for bookworm/easyh10=1.5-5
--2023-05-05 12:36:50-- http://cdn-fastly.deb.debian.org/debian/pool/main/e/easyh10/easyh10_1.5-5.dsc
Connecting to 78.137.99.97:3128... connected.
Proxy request sent, awaiting response... 200 OK
Length: 1807 (1.8K) [text/prs.lines.tag]
Saving to: ‘easyh10_1.5-5.dsc’
0K . 100% 178M=0s
2023-05-05 12:36:50 (178 MB/s) - ‘easyh10_1.5-5.dsc’ saved [1807/1807]
Fri May 5 12:36:51 UTC 2023 I: easyh10_1.5-5.dsc
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 3.0 (quilt)
Source: easyh10
Binary: easyh10
Architecture: any
Version: 1.5-5
Maintainer: Debian QA Group <packages@qa.debian.org>
Homepage: http://easyh10.sf.net
Standards-Version: 4.6.0
Vcs-Browser: https://salsa.debian.org/debian/easyh10
Vcs-Git: https://salsa.debian.org/debian/easyh10.git
Build-Depends: debhelper-compat (= 13), libid3tag0-dev
Package-List:
easyh10 deb sound optional arch=any
Checksums-Sha1:
2d6dd78f23829b6e2d21e3362a8eafd651597f19 406548 easyh10_1.5.orig.tar.gz
a6ea8570608f4daae580acd05e2344ea48e3d848 6880 easyh10_1.5-5.debian.tar.xz
Checksums-Sha256:
4d41ff5d85493466451464f6e0613e29a193494cc69504eefc001f367a07875d 406548 easyh10_1.5.orig.tar.gz
69eef1375c99bf478d850d09e8bfcf452a2728df248ec75a8250e4d8ad6803c7 6880 easyh10_1.5-5.debian.tar.xz
Files:
167f42d1781714b0f83df4619f421a51 406548 easyh10_1.5.orig.tar.gz
602af3db2d55683438cc98a453ee0d2e 6880 easyh10_1.5-5.debian.tar.xz
-----BEGIN PGP SIGNATURE-----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=oeVQ
-----END PGP SIGNATURE-----
Fri May 5 12:36:51 UTC 2023 I: Checking whether the package is not for us
Fri May 5 12:36:51 UTC 2023 I: Starting 1st build on remote node cbxi4pro0-armhf-rb.debian.net.
Fri May 5 12:36:51 UTC 2023 I: Preparing to do remote build '1' on cbxi4pro0-armhf-rb.debian.net.
Fri May 5 12:45:10 UTC 2023 I: Deleting $TMPDIR on cbxi4pro0-armhf-rb.debian.net.
I: pbuilder: network access will be disabled during build
I: Current time: Fri May 5 00:37:02 -12 2023
I: pbuilder-time-stamp: 1683290222
I: Building the build Environment
I: extracting base tarball [/var/cache/pbuilder/bookworm-reproducible-base.tgz]
I: copying local configuration
W: --override-config is not set; not updating apt.conf Read the manpage for details.
I: mounting /proc filesystem
I: mounting /sys filesystem
I: creating /{dev,run}/shm
I: mounting /dev/pts filesystem
I: redirecting /dev/ptmx to /dev/pts/ptmx
I: policy-rc.d already exists
I: Copying source file
I: copying [easyh10_1.5-5.dsc]
I: copying [./easyh10_1.5.orig.tar.gz]
I: copying [./easyh10_1.5-5.debian.tar.xz]
I: Extracting source
gpgv: Signature made Wed Aug 18 10:14:16 2021 -12
gpgv: using RSA key 7E7729476D87D6F11D91ACCBC293E7B461825ACE
gpgv: Can't check signature: No public key
dpkg-source: warning: cannot verify inline signature for ./easyh10_1.5-5.dsc: no acceptable signature found
dpkg-source: info: extracting easyh10 in easyh10-1.5
dpkg-source: info: unpacking easyh10_1.5.orig.tar.gz
dpkg-source: info: unpacking easyh10_1.5-5.debian.tar.xz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: applying 10-fix-autoconf.in.patch
dpkg-source: info: applying 20-dont-install-docs.patch
dpkg-source: info: applying 30-fix-spelling.patch
dpkg-source: info: applying 40-fix-FTBFS-Hurd.patch
dpkg-source: info: applying 50-no-am-langinfo-codeset.patch
I: Not using root during the build.
I: Installing the build-deps
I: user script /srv/workspace/pbuilder/28082/tmp/hooks/D02_print_environment starting
I: set
BUILDDIR='/build'
BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other'
BUILDUSERNAME='pbuilder1'
BUILD_ARCH='armhf'
DEBIAN_FRONTEND='noninteractive'
DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3'
DISTRIBUTION='bookworm'
HOME='/root'
HOST_ARCH='armhf'
IFS='
'
INVOCATION_ID='6cb496be4b474153893c93393aa179b9'
LANG='C'
LANGUAGE='en_US:en'
LC_ALL='C'
MAIL='/var/mail/root'
OPTIND='1'
PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games'
PBCURRENTCOMMANDLINEOPERATION='build'
PBUILDER_OPERATION='build'
PBUILDER_PKGDATADIR='/usr/share/pbuilder'
PBUILDER_PKGLIBDIR='/usr/lib/pbuilder'
PBUILDER_SYSCONFDIR='/etc'
PPID='28082'
PS1='# '
PS2='> '
PS4='+ '
PWD='/'
SHELL='/bin/bash'
SHLVL='2'
SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.N87yfNDI/pbuilderrc_Ce6V --distribution bookworm --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bookworm-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.N87yfNDI/b1 --logfile b1/build.log easyh10_1.5-5.dsc'
SUDO_GID='113'
SUDO_UID='107'
SUDO_USER='jenkins'
TERM='unknown'
TZ='/usr/share/zoneinfo/Etc/GMT+12'
USER='root'
_='/usr/bin/systemd-run'
http_proxy='http://10.0.0.15:3142/'
I: uname -a
Linux cbxi4pro0 5.10.0-22-armmp #1 SMP Debian 5.10.178-3 (2023-04-22) armv7l GNU/Linux
I: ls -l /bin
total 5072
-rwxr-xr-x 1 root root 838488 Apr 23 09:24 bash
-rwxr-xr-x 3 root root 67144 Sep 18 2022 bunzip2
-rwxr-xr-x 3 root root 67144 Sep 18 2022 bzcat
lrwxrwxrwx 1 root root 6 Sep 18 2022 bzcmp -> bzdiff
-rwxr-xr-x 1 root root 2225 Sep 18 2022 bzdiff
lrwxrwxrwx 1 root root 6 Sep 18 2022 bzegrep -> bzgrep
-rwxr-xr-x 1 root root 4893 Nov 27 2021 bzexe
lrwxrwxrwx 1 root root 6 Sep 18 2022 bzfgrep -> bzgrep
-rwxr-xr-x 1 root root 3775 Sep 18 2022 bzgrep
-rwxr-xr-x 3 root root 67144 Sep 18 2022 bzip2
-rwxr-xr-x 1 root root 67112 Sep 18 2022 bzip2recover
lrwxrwxrwx 1 root root 6 Sep 18 2022 bzless -> bzmore
-rwxr-xr-x 1 root root 1297 Sep 18 2022 bzmore
-rwxr-xr-x 1 root root 67632 Sep 20 2022 cat
-rwxr-xr-x 1 root root 67676 Sep 20 2022 chgrp
-rwxr-xr-x 1 root root 67644 Sep 20 2022 chmod
-rwxr-xr-x 1 root root 67684 Sep 20 2022 chown
-rwxr-xr-x 1 root root 133532 Sep 20 2022 cp
-rwxr-xr-x 1 root root 132868 Jan 5 01:20 dash
-rwxr-xr-x 1 root root 133220 Sep 20 2022 date
-rwxr-xr-x 1 root root 67732 Sep 20 2022 dd
-rwxr-xr-x 1 root root 68104 Sep 20 2022 df
-rwxr-xr-x 1 root root 133632 Sep 20 2022 dir
-rwxr-xr-x 1 root root 59128 Mar 22 21:02 dmesg
lrwxrwxrwx 1 root root 8 Dec 19 01:33 dnsdomainname -> hostname
lrwxrwxrwx 1 root root 8 Dec 19 01:33 domainname -> hostname
-rwxr-xr-x 1 root root 67560 Sep 20 2022 echo
-rwxr-xr-x 1 root root 41 Jan 24 02:43 egrep
-rwxr-xr-x 1 root root 67548 Sep 20 2022 false
-rwxr-xr-x 1 root root 41 Jan 24 02:43 fgrep
-rwxr-xr-x 1 root root 55748 Mar 22 21:02 findmnt
-rwsr-xr-x 1 root root 26208 Mar 22 20:15 fusermount
-rwxr-xr-x 1 root root 128608 Jan 24 02:43 grep
-rwxr-xr-x 2 root root 2346 Apr 9 2022 gunzip
-rwxr-xr-x 1 root root 6447 Apr 9 2022 gzexe
-rwxr-xr-x 1 root root 64220 Apr 9 2022 gzip
-rwxr-xr-x 1 root root 67032 Dec 19 01:33 hostname
-rwxr-xr-x 1 root root 67720 Sep 20 2022 ln
-rwxr-xr-x 1 root root 35132 Mar 22 21:51 login
-rwxr-xr-x 1 root root 133632 Sep 20 2022 ls
-rwxr-xr-x 1 root root 136808 Mar 22 21:02 lsblk
-rwxr-xr-x 1 root root 67800 Sep 20 2022 mkdir
-rwxr-xr-x 1 root root 67764 Sep 20 2022 mknod
-rwxr-xr-x 1 root root 67596 Sep 20 2022 mktemp
-rwxr-xr-x 1 root root 38504 Mar 22 21:02 more
-rwsr-xr-x 1 root root 38496 Mar 22 21:02 mount
-rwxr-xr-x 1 root root 9824 Mar 22 21:02 mountpoint
-rwxr-xr-x 1 root root 133532 Sep 20 2022 mv
lrwxrwxrwx 1 root root 8 Dec 19 01:33 nisdomainname -> hostname
lrwxrwxrwx 1 root root 14 Apr 2 18:25 pidof -> /sbin/killall5
-rwxr-xr-x 1 root root 67608 Sep 20 2022 pwd
lrwxrwxrwx 1 root root 4 Apr 23 09:24 rbash -> bash
-rwxr-xr-x 1 root root 67600 Sep 20 2022 readlink
-rwxr-xr-x 1 root root 67672 Sep 20 2022 rm
-rwxr-xr-x 1 root root 67600 Sep 20 2022 rmdir
-rwxr-xr-x 1 root root 67400 Nov 2 2022 run-parts
-rwxr-xr-x 1 root root 133372 Jan 5 07:55 sed
lrwxrwxrwx 1 root root 4 Jan 5 01:20 sh -> dash
-rwxr-xr-x 1 root root 67584 Sep 20 2022 sleep
-rwxr-xr-x 1 root root 67644 Sep 20 2022 stty
-rwsr-xr-x 1 root root 50800 Mar 22 21:02 su
-rwxr-xr-x 1 root root 67584 Sep 20 2022 sync
-rwxr-xr-x 1 root root 336764 Apr 6 02:25 tar
-rwxr-xr-x 1 root root 67144 Nov 2 2022 tempfile
-rwxr-xr-x 1 root root 133224 Sep 20 2022 touch
-rwxr-xr-x 1 root root 67548 Sep 20 2022 true
-rwxr-xr-x 1 root root 9768 Mar 22 20:15 ulockmgr_server
-rwsr-xr-x 1 root root 22108 Mar 22 21:02 umount
-rwxr-xr-x 1 root root 67572 Sep 20 2022 uname
-rwxr-xr-x 2 root root 2346 Apr 9 2022 uncompress
-rwxr-xr-x 1 root root 133632 Sep 20 2022 vdir
-rwxr-xr-x 1 root root 42608 Mar 22 21:02 wdctl
lrwxrwxrwx 1 root root 8 Dec 19 01:33 ypdomainname -> hostname
-rwxr-xr-x 1 root root 1984 Apr 9 2022 zcat
-rwxr-xr-x 1 root root 1678 Apr 9 2022 zcmp
-rwxr-xr-x 1 root root 6460 Apr 9 2022 zdiff
-rwxr-xr-x 1 root root 29 Apr 9 2022 zegrep
-rwxr-xr-x 1 root root 29 Apr 9 2022 zfgrep
-rwxr-xr-x 1 root root 2081 Apr 9 2022 zforce
-rwxr-xr-x 1 root root 8103 Apr 9 2022 zgrep
-rwxr-xr-x 1 root root 2206 Apr 9 2022 zless
-rwxr-xr-x 1 root root 1842 Apr 9 2022 zmore
-rwxr-xr-x 1 root root 4577 Apr 9 2022 znew
I: user script /srv/workspace/pbuilder/28082/tmp/hooks/D02_print_environment finished
-> Attempting to satisfy build-dependencies
-> Creating pbuilder-satisfydepends-dummy package
Package: pbuilder-satisfydepends-dummy
Version: 0.invalid.0
Architecture: armhf
Maintainer: Debian Pbuilder Team <pbuilder-maint@lists.alioth.debian.org>
Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder
This package was created automatically by pbuilder to satisfy the
build-dependencies of the package being currently built.
Depends: debhelper-compat (= 13), libid3tag0-dev
dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'.
Selecting previously unselected package pbuilder-satisfydepends-dummy.
(Reading database ... 19329 files and directories currently installed.)
Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ...
Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ...
dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested:
pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however:
Package debhelper-compat is not installed.
pbuilder-satisfydepends-dummy depends on libid3tag0-dev; however:
Package libid3tag0-dev is not installed.
Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ...
Reading package lists...
Building dependency tree...
Reading state information...
Initializing package states...
Writing extended state information...
Building tag database...
pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0)
pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0)
The following NEW packages will be installed:
autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libicu72{a} libid3tag0{a} libid3tag0-dev{a} libmagic-mgc{a} libmagic1{a} libpipeline1{a} libpkgconf3{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} pkg-config{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} sensible-utils{a} zlib1g-dev{a}
The following packages are RECOMMENDED but will NOT be installed:
curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget
0 packages upgraded, 37 newly installed, 0 to remove and 0 not upgraded.
Need to get 19.1 MB of archives. After unpacking 69.4 MB will be used.
Writing extended state information...
Get: 1 http://deb.debian.org/debian bookworm/main armhf sensible-utils all 0.0.17+nmu1 [19.0 kB]
Get: 2 http://deb.debian.org/debian bookworm/main armhf libmagic-mgc armhf 1:5.44-3 [305 kB]
Get: 3 http://deb.debian.org/debian bookworm/main armhf libmagic1 armhf 1:5.44-3 [96.5 kB]
Get: 4 http://deb.debian.org/debian bookworm/main armhf file armhf 1:5.44-3 [41.6 kB]
Get: 5 http://deb.debian.org/debian bookworm/main armhf gettext-base armhf 0.21-12 [157 kB]
Get: 6 http://deb.debian.org/debian bookworm/main armhf libuchardet0 armhf 0.0.7-1 [65.0 kB]
Get: 7 http://deb.debian.org/debian bookworm/main armhf groff-base armhf 1.22.4-10 [825 kB]
Get: 8 http://deb.debian.org/debian bookworm/main armhf bsdextrautils armhf 2.38.1-5+b1 [78.6 kB]
Get: 9 http://deb.debian.org/debian bookworm/main armhf libpipeline1 armhf 1.5.7-1 [33.6 kB]
Get: 10 http://deb.debian.org/debian bookworm/main armhf man-db armhf 2.11.2-2 [1351 kB]
Get: 11 http://deb.debian.org/debian bookworm/main armhf m4 armhf 1.4.19-3 [265 kB]
Get: 12 http://deb.debian.org/debian bookworm/main armhf autoconf all 2.71-3 [332 kB]
Get: 13 http://deb.debian.org/debian bookworm/main armhf autotools-dev all 20220109.1 [51.6 kB]
Get: 14 http://deb.debian.org/debian bookworm/main armhf automake all 1:1.16.5-1.3 [823 kB]
Get: 15 http://deb.debian.org/debian bookworm/main armhf autopoint all 0.21-12 [495 kB]
Get: 16 http://deb.debian.org/debian bookworm/main armhf libdebhelper-perl all 13.11.4 [81.2 kB]
Get: 17 http://deb.debian.org/debian bookworm/main armhf libtool all 2.4.7-5 [517 kB]
Get: 18 http://deb.debian.org/debian bookworm/main armhf dh-autoreconf all 20 [17.1 kB]
Get: 19 http://deb.debian.org/debian bookworm/main armhf libarchive-zip-perl all 1.68-1 [104 kB]
Get: 20 http://deb.debian.org/debian bookworm/main armhf libsub-override-perl all 0.09-4 [9304 B]
Get: 21 http://deb.debian.org/debian bookworm/main armhf libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB]
Get: 22 http://deb.debian.org/debian bookworm/main armhf dh-strip-nondeterminism all 1.13.1-1 [8620 B]
Get: 23 http://deb.debian.org/debian bookworm/main armhf libelf1 armhf 0.188-2.1 [170 kB]
Get: 24 http://deb.debian.org/debian bookworm/main armhf dwz armhf 0.15-1 [101 kB]
Get: 25 http://deb.debian.org/debian bookworm/main armhf libicu72 armhf 72.1-3 [9048 kB]
Get: 26 http://deb.debian.org/debian bookworm/main armhf libxml2 armhf 2.9.14+dfsg-1.2 [591 kB]
Get: 27 http://deb.debian.org/debian bookworm/main armhf gettext armhf 0.21-12 [1229 kB]
Get: 28 http://deb.debian.org/debian bookworm/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB]
Get: 29 http://deb.debian.org/debian bookworm/main armhf po-debconf all 1.0.21+nmu1 [248 kB]
Get: 30 http://deb.debian.org/debian bookworm/main armhf debhelper all 13.11.4 [942 kB]
Get: 31 http://deb.debian.org/debian bookworm/main armhf libid3tag0 armhf 0.15.1b-14 [30.2 kB]
Get: 32 http://deb.debian.org/debian bookworm/main armhf libpkgconf3 armhf 1.8.1-1 [31.3 kB]
Get: 33 http://deb.debian.org/debian bookworm/main armhf pkgconf-bin armhf 1.8.1-1 [28.5 kB]
Get: 34 http://deb.debian.org/debian bookworm/main armhf pkgconf armhf 1.8.1-1 [25.9 kB]
Get: 35 http://deb.debian.org/debian bookworm/main armhf pkg-config armhf 1.8.1-1 [13.7 kB]
Get: 36 http://deb.debian.org/debian bookworm/main armhf zlib1g-dev armhf 1:1.2.13.dfsg-1 [902 kB]
Get: 37 http://deb.debian.org/debian bookworm/main armhf libid3tag0-dev armhf 0.15.1b-14 [35.7 kB]
Fetched 19.1 MB in 2s (7853 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package sensible-utils.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 19329 files and directories currently installed.)
Preparing to unpack .../00-sensible-utils_0.0.17+nmu1_all.deb ...
Unpacking sensible-utils (0.0.17+nmu1) ...
Selecting previously unselected package libmagic-mgc.
Preparing to unpack .../01-libmagic-mgc_1%3a5.44-3_armhf.deb ...
Unpacking libmagic-mgc (1:5.44-3) ...
Selecting previously unselected package libmagic1:armhf.
Preparing to unpack .../02-libmagic1_1%3a5.44-3_armhf.deb ...
Unpacking libmagic1:armhf (1:5.44-3) ...
Selecting previously unselected package file.
Preparing to unpack .../03-file_1%3a5.44-3_armhf.deb ...
Unpacking file (1:5.44-3) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../04-gettext-base_0.21-12_armhf.deb ...
Unpacking gettext-base (0.21-12) ...
Selecting previously unselected package libuchardet0:armhf.
Preparing to unpack .../05-libuchardet0_0.0.7-1_armhf.deb ...
Unpacking libuchardet0:armhf (0.0.7-1) ...
Selecting previously unselected package groff-base.
Preparing to unpack .../06-groff-base_1.22.4-10_armhf.deb ...
Unpacking groff-base (1.22.4-10) ...
Selecting previously unselected package bsdextrautils.
Preparing to unpack .../07-bsdextrautils_2.38.1-5+b1_armhf.deb ...
Unpacking bsdextrautils (2.38.1-5+b1) ...
Selecting previously unselected package libpipeline1:armhf.
Preparing to unpack .../08-libpipeline1_1.5.7-1_armhf.deb ...
Unpacking libpipeline1:armhf (1.5.7-1) ...
Selecting previously unselected package man-db.
Preparing to unpack .../09-man-db_2.11.2-2_armhf.deb ...
Unpacking man-db (2.11.2-2) ...
Selecting previously unselected package m4.
Preparing to unpack .../10-m4_1.4.19-3_armhf.deb ...
Unpacking m4 (1.4.19-3) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../11-autoconf_2.71-3_all.deb ...
Unpacking autoconf (2.71-3) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../14-autopoint_0.21-12_all.deb ...
Unpacking autopoint (0.21-12) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../15-libdebhelper-perl_13.11.4_all.deb ...
Unpacking libdebhelper-perl (13.11.4) ...
Selecting previously unselected package libtool.
Preparing to unpack .../16-libtool_2.4.7-5_all.deb ...
Unpacking libtool (2.4.7-5) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../17-dh-autoreconf_20_all.deb ...
Unpacking dh-autoreconf (20) ...
Selecting previously unselected package libarchive-zip-perl.
Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ...
Unpacking libarchive-zip-perl (1.68-1) ...
Selecting previously unselected package libsub-override-perl.
Preparing to unpack .../19-libsub-override-perl_0.09-4_all.deb ...
Unpacking libsub-override-perl (0.09-4) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../21-dh-strip-nondeterminism_1.13.1-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.13.1-1) ...
Selecting previously unselected package libelf1:armhf.
Preparing to unpack .../22-libelf1_0.188-2.1_armhf.deb ...
Unpacking libelf1:armhf (0.188-2.1) ...
Selecting previously unselected package dwz.
Preparing to unpack .../23-dwz_0.15-1_armhf.deb ...
Unpacking dwz (0.15-1) ...
Selecting previously unselected package libicu72:armhf.
Preparing to unpack .../24-libicu72_72.1-3_armhf.deb ...
Unpacking libicu72:armhf (72.1-3) ...
Selecting previously unselected package libxml2:armhf.
Preparing to unpack .../25-libxml2_2.9.14+dfsg-1.2_armhf.deb ...
Unpacking libxml2:armhf (2.9.14+dfsg-1.2) ...
Selecting previously unselected package gettext.
Preparing to unpack .../26-gettext_0.21-12_armhf.deb ...
Unpacking gettext (0.21-12) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.6) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ...
Unpacking po-debconf (1.0.21+nmu1) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../29-debhelper_13.11.4_all.deb ...
Unpacking debhelper (13.11.4) ...
Selecting previously unselected package libid3tag0:armhf.
Preparing to unpack .../30-libid3tag0_0.15.1b-14_armhf.deb ...
Unpacking libid3tag0:armhf (0.15.1b-14) ...
Selecting previously unselected package libpkgconf3:armhf.
Preparing to unpack .../31-libpkgconf3_1.8.1-1_armhf.deb ...
Unpacking libpkgconf3:armhf (1.8.1-1) ...
Selecting previously unselected package pkgconf-bin.
Preparing to unpack .../32-pkgconf-bin_1.8.1-1_armhf.deb ...
Unpacking pkgconf-bin (1.8.1-1) ...
Selecting previously unselected package pkgconf:armhf.
Preparing to unpack .../33-pkgconf_1.8.1-1_armhf.deb ...
Unpacking pkgconf:armhf (1.8.1-1) ...
Selecting previously unselected package pkg-config:armhf.
Preparing to unpack .../34-pkg-config_1.8.1-1_armhf.deb ...
Unpacking pkg-config:armhf (1.8.1-1) ...
Selecting previously unselected package zlib1g-dev:armhf.
Preparing to unpack .../35-zlib1g-dev_1%3a1.2.13.dfsg-1_armhf.deb ...
Unpacking zlib1g-dev:armhf (1:1.2.13.dfsg-1) ...
Selecting previously unselected package libid3tag0-dev.
Preparing to unpack .../36-libid3tag0-dev_0.15.1b-14_armhf.deb ...
Unpacking libid3tag0-dev (0.15.1b-14) ...
Setting up libpipeline1:armhf (1.5.7-1) ...
Setting up libicu72:armhf (72.1-3) ...
Setting up bsdextrautils (2.38.1-5+b1) ...
Setting up libmagic-mgc (1:5.44-3) ...
Setting up libarchive-zip-perl (1.68-1) ...
Setting up libdebhelper-perl (13.11.4) ...
Setting up libmagic1:armhf (1:5.44-3) ...
Setting up gettext-base (0.21-12) ...
Setting up m4 (1.4.19-3) ...
Setting up file (1:5.44-3) ...
Setting up libid3tag0:armhf (0.15.1b-14) ...
Setting up autotools-dev (20220109.1) ...
Setting up libpkgconf3:armhf (1.8.1-1) ...
Setting up autopoint (0.21-12) ...
Setting up pkgconf-bin (1.8.1-1) ...
Setting up autoconf (2.71-3) ...
Setting up zlib1g-dev:armhf (1:1.2.13.dfsg-1) ...
Setting up sensible-utils (0.0.17+nmu1) ...
Setting up libuchardet0:armhf (0.0.7-1) ...
Setting up libsub-override-perl (0.09-4) ...
Setting up libelf1:armhf (0.188-2.1) ...
Setting up libxml2:armhf (2.9.14+dfsg-1.2) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up libfile-stripnondeterminism-perl (1.13.1-1) ...
Setting up gettext (0.21-12) ...
Setting up libtool (2.4.7-5) ...
Setting up pkgconf:armhf (1.8.1-1) ...
Setting up intltool-debian (0.35.0+20060710.6) ...
Setting up dh-autoreconf (20) ...
Setting up pkg-config:armhf (1.8.1-1) ...
Setting up libid3tag0-dev (0.15.1b-14) ...
Setting up dh-strip-nondeterminism (1.13.1-1) ...
Setting up dwz (0.15-1) ...
Setting up groff-base (1.22.4-10) ...
Setting up po-debconf (1.0.21+nmu1) ...
Setting up man-db (2.11.2-2) ...
Not building database; man-db/auto-update is not 'true'.
Setting up debhelper (13.11.4) ...
Processing triggers for libc-bin (2.36-9) ...
Reading package lists...
Building dependency tree...
Reading state information...
Reading extended state information...
Initializing package states...
Writing extended state information...
Building tag database...
-> Finished parsing the build-deps
I: Building the package
I: Running cd /build/easyh10-1.5/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../easyh10_1.5-5_source.changes
dpkg-buildpackage: info: source package easyh10
dpkg-buildpackage: info: source version 1.5-5
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Boyuan Yang <byang@debian.org>
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture armhf
debian/rules clean
dh clean
dh_clean
debian/rules binary
dh binary
dh_update_autotools_config
dh_autoreconf
autoreconf: warning: autoconf input should be named 'configure.ac', not 'configure.in'
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.in,
libtoolize: and rerunning libtoolize and aclocal.
libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:18: warning: The macro `AC_AIX' is obsolete.
configure.in:18: You should run autoupdate.
./lib/autoconf/specific.m4:540: AC_AIX is expanded from...
configure.in:18: the top level
configure.in:19: warning: The macro `AC_MINIX' is obsolete.
configure.in:19: You should run autoupdate.
./lib/autoconf/specific.m4:545: AC_MINIX is expanded from...
configure.in:19: the top level
configure.in:20: warning: The macro `AC_ISC_POSIX' is obsolete.
configure.in:20: You should run autoupdate.
./lib/autoconf/specific.m4:550: AC_ISC_POSIX is expanded from...
configure.in:20: the top level
configure.in:23: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated.
./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from...
aclocal.m4:9517: AM_INIT_AUTOMAKE is expanded from...
configure.in:23: the top level
configure.in:24: warning: 'AM_CONFIG_HEADER': this macro is obsolete.
configure.in:24: You should use the 'AC_CONFIG_HEADERS' macro instead.
./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from...
aclocal.m4:9869: AM_CONFIG_HEADER is expanded from...
configure.in:24: the top level
configure.in:27: warning: The macro `AC_HEADER_STDC' is obsolete.
configure.in:27: You should run autoupdate.
./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from...
configure.in:27: the top level
configure.in:28: warning: AC_CHECK_HEADERS("string.h"): you should use literals
./lib/autoconf/headers.m4:217: AC_CHECK_HEADERS is expanded from...
configure.in:28: the top level
configure.in:31: warning: 'AM_PROG_CC_STDC': this macro is obsolete.
configure.in:31: You should simply use the 'AC_PROG_CC' macro instead.
configure.in:31: Also, your code should no longer depend upon 'am_cv_prog_cc_stdc',
configure.in:31: but upon 'ac_cv_prog_cc_stdc'.
./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from...
aclocal.m4:9875: AM_PROG_CC_STDC is expanded from...
configure.in:31: the top level
configure.in:37: warning: The macro `AC_PROG_LIBTOOL' is obsolete.
configure.in:37: You should run autoupdate.
aclocal.m4:122: AC_PROG_LIBTOOL is expanded from...
configure.in:37: the top level
configure.in:48: warning: The macro `AC_HEADER_STDC' is obsolete.
configure.in:48: You should run autoupdate.
./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from...
configure.in:48: the top level
configure.in:116: warning: The macro `AC_HELP_STRING' is obsolete.
configure.in:116: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from...
configure.in:116: the top level
configure.in:122: warning: The macro `AC_HELP_STRING' is obsolete.
configure.in:122: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from...
configure.in:122: the top level
configure.in:187: warning: The macro `AC_HELP_STRING' is obsolete.
configure.in:187: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from...
configure.in:187: the top level
configure.in:193: warning: The macro `AC_HELP_STRING' is obsolete.
configure.in:193: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from...
configure.in:193: the top level
configure.in:241: warning: The macro `AC_HELP_STRING' is obsolete.
configure.in:241: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from...
configure.in:241: the top level
autoheader: warning: autoconf input should be named 'configure.ac', not 'configure.in'
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:23: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.in:23: https://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
configure.in:18: installing './compile'
configure.in:23: installing './missing'
configure.in:253: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
cui/Makefile.am:24: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
cui/Makefile.am:7: warning: source file '../common/playlist.c' is in a subdirectory,
cui/Makefile.am:7: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least one source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However, this
automake: behavior may change in a future Automake major version, with object
automake: files being placed in the same subdirectory as the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
cui/Makefile.am:7: warning: source file '../common/regex_playlist_posix.c' is in a subdirectory,
cui/Makefile.am:7: but option 'subdir-objects' is disabled
cui/Makefile.am:7: warning: source file '../common/easyh10_database.c' is in a subdirectory,
cui/Makefile.am:7: but option 'subdir-objects' is disabled
cui/Makefile.am:7: warning: source file '../common/easyh10_template.c' is in a subdirectory,
cui/Makefile.am:7: but option 'subdir-objects' is disabled
cui/Makefile.am:7: warning: source file '../common/easyh10_dump.c' is in a subdirectory,
cui/Makefile.am:7: but option 'subdir-objects' is disabled
cui/Makefile.am:7: warning: source file '../common/easyh10_playlist.c' is in a subdirectory,
cui/Makefile.am:7: but option 'subdir-objects' is disabled
cui/Makefile.am:7: warning: source file '../common/easyh10_tuner.c' is in a subdirectory,
cui/Makefile.am:7: but option 'subdir-objects' is disabled
cui/Makefile.am:7: warning: source file '../common/filepathutil_posix.c' is in a subdirectory,
cui/Makefile.am:7: but option 'subdir-objects' is disabled
cui/Makefile.am:7: warning: source file '../common/rel2abs.c' is in a subdirectory,
cui/Makefile.am:7: but option 'subdir-objects' is disabled
cui/Makefile.am: installing './depcomp'
libgetmediainfo/Makefile.am:13: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
libh10db/Makefile.am:22: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
libucs2/Makefile.am:11: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
dh_auto_configure
./configure --build=arm-linux-gnueabihf --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking
checking build system type... arm-unknown-linux-gnueabihf
checking host system type... arm-unknown-linux-gnueabihf
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for library containing strerror... none required
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of gcc... none
checking whether to enable maintainer-specific portions of Makefiles... no
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for string.h... (cached) yes
checking for gcc... (cached) gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to enable C11 features... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking for gcc... (cached) gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to enable C11 features... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking whether ln -s works... yes
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking the maximum length of command line arguments... 1572864
checking how to convert arm-unknown-linux-gnueabihf file names to arm-unknown-linux-gnueabihf format... func_convert_file_noop
checking how to convert arm-unknown-linux-gnueabihf file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for egrep... (cached) /bin/grep -E
checking for fcntl.h... yes
checking for limits.h... yes
checking for malloc.h... yes
checking for strings.h... (cached) yes
checking for unistd.h... (cached) yes
checking for stdint.h... (cached) yes
checking for getopt.h... yes
checking for an ANSI C-conforming const... yes
checking size of ... 0
checking for size_t... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking size of short... 2
checking size of unsigned short... 2
checking size of int... 4
checking size of unsigned int... 4
checking size of long... 4
checking size of unsigned long... 4
checking for uint8_t... yes
checking for uint16_t... yes
checking for uint32_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking for working memcmp... yes
checking for vprintf... yes
checking for getcwd... yes
checking for mktime... yes
checking for strdup... yes
checking for strerror... yes
checking for strtol... yes
checking for strtoul... yes
checking for rand in -lm... yes
checking for uncompress in -lz... yes
checking for iconv.h... yes
checking for iconv_open... yes
checking for id3tag.h... yes
checking for id3_file_fdopen in -lid3tag... yes
checking for id3_file_gettag in -lid3tag... no
checking for regcomp... yes
checking for regexec... yes
checking for regfree... yes
checking for rxposix.h... no
checking for regexec in -lrx... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating cui/Makefile
config.status: creating libh10db/Makefile
config.status: creating libucs2/Makefile
config.status: creating libgetmediainfo/Makefile
config.status: creating easyh10.spec
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
dh_auto_build
make -j3
make[1]: Entering directory '/build/easyh10-1.5'
make all-recursive
make[2]: Entering directory '/build/easyh10-1.5'
Making all in libh10db
make[3]: Entering directory '/build/easyh10-1.5/libh10db'
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o bufferedfile.lo bufferedfile.c
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o crc.lo crc.c
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o h10db.lo h10db.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c crc.c -fPIC -DPIC -o .libs/crc.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c h10db.c -fPIC -DPIC -o .libs/h10db.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c bufferedfile.c -fPIC -DPIC -o .libs/bufferedfile.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c crc.c -o crc.o >/dev/null 2>&1
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c bufferedfile.c -o bufferedfile.o >/dev/null 2>&1
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o h10db_dat.lo h10db_dat.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c h10db_dat.c -fPIC -DPIC -o .libs/h10db_dat.o
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o h10db_hdr.lo h10db_hdr.c
h10db_dat.c: In function 'h10db_dat_repr':
h10db_dat.c:262:33: warning: format '%s' expects argument of type 'char *', but argument 3 has type 'ucs2_char_t *' {aka 'short unsigned int *'} [-Wformat=]
262 | fprintf(fp, "unknown6: %s\n", item->unknown6);
| ~^ ~~~~~~~~~~~~~~
| | |
| char * ucs2_char_t * {aka short unsigned int *}
| %hn
h10db_dat.c:264:33: warning: format '%s' expects argument of type 'char *', but argument 3 has type 'ucs2_char_t *' {aka 'short unsigned int *'} [-Wformat=]
264 | fprintf(fp, "unknown8: %s\n", item->unknown8);
| ~^ ~~~~~~~~~~~~~~
| | |
| char * ucs2_char_t * {aka short unsigned int *}
| %hn
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c h10db_hdr.c -fPIC -DPIC -o .libs/h10db_hdr.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c h10db_hdr.c -o h10db_hdr.o >/dev/null 2>&1
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o h10db_idx.lo h10db_idx.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c h10db_dat.c -o h10db_dat.o >/dev/null 2>&1
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c h10db.c -o h10db.o >/dev/null 2>&1
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c h10db_idx.c -fPIC -DPIC -o .libs/h10db_idx.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c h10db_idx.c -o h10db_idx.o >/dev/null 2>&1
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o h10db_upd.lo h10db_upd.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c h10db_upd.c -fPIC -DPIC -o .libs/h10db_upd.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c h10db_upd.c -o h10db_upd.o >/dev/null 2>&1
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o h10db_model.lo h10db_model.c
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o serialize.lo serialize.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c h10db_model.c -fPIC -DPIC -o .libs/h10db_model.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c serialize.c -fPIC -DPIC -o .libs/serialize.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c h10db_model.c -o h10db_model.o >/dev/null 2>&1
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c serialize.c -o serialize.o >/dev/null 2>&1
/bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -o libh10db.la bufferedfile.lo crc.lo h10db.lo h10db_dat.lo h10db_hdr.lo h10db_idx.lo h10db_upd.lo h10db_model.lo serialize.lo -lz -lm
libtool: link: ar cr .libs/libh10db.a .libs/bufferedfile.o .libs/crc.o .libs/h10db.o .libs/h10db_dat.o .libs/h10db_hdr.o .libs/h10db_idx.o .libs/h10db_upd.o .libs/h10db_model.o .libs/serialize.o
libtool: link: ranlib .libs/libh10db.a
libtool: link: ( cd ".libs" && rm -f "libh10db.la" && ln -s "../libh10db.la" "libh10db.la" )
make[3]: Leaving directory '/build/easyh10-1.5/libh10db'
Making all in libucs2
make[3]: Entering directory '/build/easyh10-1.5/libucs2'
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o ucs2char.lo ucs2char.c
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o ucs2char_iconv.lo ucs2char_iconv.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c ucs2char.c -fPIC -DPIC -o .libs/ucs2char.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c ucs2char_iconv.c -fPIC -DPIC -o .libs/ucs2char_iconv.o
ucs2char.c: In function 'print_ucs2':
ucs2char.c:284:28: warning: format '%c' expects a matching 'int' argument [-Wformat=]
284 | fprintf(stderr, "0x%X %c ", *str);
| ~^
| |
| int
ucs2char_iconv.c: In function 'print_ucs2':
ucs2char_iconv.c:57:28: warning: format '%c' expects a matching 'int' argument [-Wformat=]
57 | fprintf(stderr, "0x%X %c ", *str);
| ~^
| |
| int
ucs2char_iconv.c: In function 'iconv_convert':
ucs2char_iconv.c:169:27: warning: passing argument 2 of 'iconv' from incompatible pointer type [-Wincompatible-pointer-types]
169 | iconv(cd, (const char **)inbuf, &inbytesleft, (char **)outbuf, &outbytesleft);
| ^~~~~~~~~~~~~~~~~~~~
| |
| const char **
In file included from ucs2char_iconv.c:40:
/usr/include/iconv.h:49:54: note: expected 'char ** restrict' but argument is of type 'const char **'
49 | extern size_t iconv (iconv_t __cd, char **__restrict __inbuf,
| ~~~~~~~~~~~~~~~~~~^~~~~~~
ucs2char_iconv.c:177:50: warning: passing argument 2 of 'iconv' from incompatible pointer type [-Wincompatible-pointer-types]
177 | int iconvret = iconv(cd, (const char **)inbuf, &inbytesleft, &p, &outbytesleft);
| ^~~~~~~~~~~~~~~~~~~~
| |
| const char **
/usr/include/iconv.h:49:54: note: expected 'char ** restrict' but argument is of type 'const char **'
49 | extern size_t iconv (iconv_t __cd, char **__restrict __inbuf,
| ~~~~~~~~~~~~~~~~~~^~~~~~~
ucs2char_iconv.c: In function 'ucs2stat_is_exist':
ucs2char_iconv.c:319:25: warning: implicit declaration of function 'close'; did you mean 'pclose'? [-Wimplicit-function-declaration]
319 | close(ret);
| ^~~~~
| pclose
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c ucs2char_iconv.c -o ucs2char_iconv.o >/dev/null 2>&1
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c ucs2char.c -o ucs2char.o >/dev/null 2>&1
/bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -o libucs2.la ucs2char.lo ucs2char_iconv.lo -lz -lm
libtool: link: ar cr .libs/libucs2.a .libs/ucs2char.o .libs/ucs2char_iconv.o
libtool: link: ranlib .libs/libucs2.a
libtool: link: ( cd ".libs" && rm -f "libucs2.la" && ln -s "../libucs2.la" "libucs2.la" )
make[3]: Leaving directory '/build/easyh10-1.5/libucs2'
Making all in libgetmediainfo
make[3]: Entering directory '/build/easyh10-1.5/libgetmediainfo'
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o getmediainfo.lo getmediainfo.c
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o gmi_mp3_id3tag.lo gmi_mp3_id3tag.c
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o gmi_wma.lo gmi_wma.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c getmediainfo.c -fPIC -DPIC -o .libs/getmediainfo.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c gmi_mp3_id3tag.c -fPIC -DPIC -o .libs/gmi_mp3_id3tag.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c gmi_wma.c -fPIC -DPIC -o .libs/gmi_wma.o
gmi_mp3_id3tag.c:61:14: warning: type defaults to 'int' in declaration of 'bitrate_table' [-Wimplicit-int]
61 | static const bitrate_table[3][16] = {
| ^~~~~~~~~~~~~
gmi_mp3_id3tag.c:67:14: warning: type defaults to 'int' in declaration of 'samplerate_table' [-Wimplicit-int]
67 | static const samplerate_table[3][4] = {
| ^~~~~~~~~~~~~~~~
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c gmi_mp3_id3tag.c -o gmi_mp3_id3tag.o >/dev/null 2>&1
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c getmediainfo.c -o getmediainfo.o >/dev/null 2>&1
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c gmi_wma.c -o gmi_wma.o >/dev/null 2>&1
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o gmi_wav.lo gmi_wav.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c gmi_wav.c -fPIC -DPIC -o .libs/gmi_wav.o
gmi_wav.c: In function 'parse_listinfo':
gmi_wav.c:102:17: warning: ignoring return value of 'fread' declared with attribute 'warn_unused_result' [-Wunused-result]
102 | fread(buffer, sizeof(char), size, fp);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c gmi_wav.c -o gmi_wav.o >/dev/null 2>&1
/bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -o libgetmediainfo.la getmediainfo.lo gmi_mp3_id3tag.lo gmi_wma.lo gmi_wav.lo -lz -lm
libtool: link: ar cr .libs/libgetmediainfo.a .libs/getmediainfo.o .libs/gmi_mp3_id3tag.o .libs/gmi_wma.o .libs/gmi_wav.o
libtool: link: ranlib .libs/libgetmediainfo.a
libtool: link: ( cd ".libs" && rm -f "libgetmediainfo.la" && ln -s "../libgetmediainfo.la" "libgetmediainfo.la" )
make[3]: Leaving directory '/build/easyh10-1.5/libgetmediainfo'
Making all in cui
make[3]: Entering directory '/build/easyh10-1.5/cui'
gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -I../common -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o main.o main.c
gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -I../common -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o playlist.o `test -f '../common/playlist.c' || echo './'`../common/playlist.c
gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -I../common -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o regex_playlist_posix.o `test -f '../common/regex_playlist_posix.c' || echo './'`../common/regex_playlist_posix.c
main.c: In function 'main':
main.c:938:25: warning: implicit declaration of function 'getcwd'; did you mean 'getw'? [-Wimplicit-function-declaration]
938 | getcwd(pwd, MAX_PATH);
| ^~~~~~
| getw
main.c:1107:30: warning: too many arguments for format [-Wformat-extra-args]
1107 | fprintf(fpe, "Installing: %seasyh10.model\n", tmp, PATHCHAR);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -I../common -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o easyh10_database.o `test -f '../common/easyh10_database.c' || echo './'`../common/easyh10_database.c
gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -I../common -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o easyh10_template.o `test -f '../common/easyh10_template.c' || echo './'`../common/easyh10_template.c
gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -I../common -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o easyh10_dump.o `test -f '../common/easyh10_dump.c' || echo './'`../common/easyh10_dump.c
gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -I../common -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o easyh10_playlist.o `test -f '../common/easyh10_playlist.c' || echo './'`../common/easyh10_playlist.c
gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -I../common -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o easyh10_tuner.o `test -f '../common/easyh10_tuner.c' || echo './'`../common/easyh10_tuner.c
../common/easyh10_tuner.c: In function 'import_tuner':
../common/easyh10_tuner.c:156:24: warning: implicit declaration of function 'isspace' [-Wimplicit-function-declaration]
156 | while (isspace(*begin)) {
| ^~~~~~~
../common/easyh10_tuner.c:37:1: note: include '<ctype.h>' or provide a declaration of 'isspace'
36 | #include <filepathutil.h>
+++ |+#include <ctype.h>
37 |
gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -I../common -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o filepathutil_posix.o `test -f '../common/filepathutil_posix.c' || echo './'`../common/filepathutil_posix.c
gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I../include -I. -I../common -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -c -o rel2abs.o `test -f '../common/rel2abs.c' || echo './'`../common/rel2abs.c
/bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -Wl,-z,relro -Wl,-z,now -o easyh10 main.o playlist.o regex_playlist_posix.o easyh10_database.o easyh10_template.o easyh10_dump.o easyh10_playlist.o easyh10_tuner.o filepathutil_posix.o rel2abs.o ../libh10db/libh10db.la ../libucs2/libucs2.la ../libgetmediainfo/libgetmediainfo.la -lid3tag -lz -lm
libtool: link: gcc -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -ffile-prefix-map=/build/easyh10-1.5=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-z -Wl,relro -Wl,-z -Wl,now -o easyh10 main.o playlist.o regex_playlist_posix.o easyh10_database.o easyh10_template.o easyh10_dump.o easyh10_playlist.o easyh10_tuner.o filepathutil_posix.o rel2abs.o ../libh10db/.libs/libh10db.a ../libucs2/.libs/libucs2.a ../libgetmediainfo/.libs/libgetmediainfo.a -lid3tag -lz -lm
make[3]: Leaving directory '/build/easyh10-1.5/cui'
make[3]: Entering directory '/build/easyh10-1.5'
make[3]: Leaving directory '/build/easyh10-1.5'
make[2]: Leaving directory '/build/easyh10-1.5'
make[1]: Leaving directory '/build/easyh10-1.5'
dh_auto_test
make -j3 check "TESTSUITEFLAGS=-j3 --verbose" VERBOSE=1
make[1]: Entering directory '/build/easyh10-1.5'
Making check in libh10db
make[2]: Entering directory '/build/easyh10-1.5/libh10db'
make[2]: Nothing to be done for 'check'.
make[2]: Leaving directory '/build/easyh10-1.5/libh10db'
Making check in libucs2
make[2]: Entering directory '/build/easyh10-1.5/libucs2'
make[2]: Nothing to be done for 'check'.
make[2]: Leaving directory '/build/easyh10-1.5/libucs2'
Making check in libgetmediainfo
make[2]: Entering directory '/build/easyh10-1.5/libgetmediainfo'
make[2]: Nothing to be done for 'check'.
make[2]: Leaving directory '/build/easyh10-1.5/libgetmediainfo'
Making check in cui
make[2]: Entering directory '/build/easyh10-1.5/cui'
make[2]: Nothing to be done for 'check'.
make[2]: Leaving directory '/build/easyh10-1.5/cui'
make[2]: Entering directory '/build/easyh10-1.5'
make[2]: Leaving directory '/build/easyh10-1.5'
make[1]: Leaving directory '/build/easyh10-1.5'
create-stamp debian/debhelper-build-stamp
dh_prep
dh_auto_install --destdir=debian/easyh10/
make -j1 install DESTDIR=/build/easyh10-1.5/debian/easyh10 AM_UPDATE_INFO_DIR=no
make[1]: Entering directory '/build/easyh10-1.5'
Making install in libh10db
make[2]: Entering directory '/build/easyh10-1.5/libh10db'
make[3]: Entering directory '/build/easyh10-1.5/libh10db'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/build/easyh10-1.5/libh10db'
make[2]: Leaving directory '/build/easyh10-1.5/libh10db'
Making install in libucs2
make[2]: Entering directory '/build/easyh10-1.5/libucs2'
make[3]: Entering directory '/build/easyh10-1.5/libucs2'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/build/easyh10-1.5/libucs2'
make[2]: Leaving directory '/build/easyh10-1.5/libucs2'
Making install in libgetmediainfo
make[2]: Entering directory '/build/easyh10-1.5/libgetmediainfo'
make[3]: Entering directory '/build/easyh10-1.5/libgetmediainfo'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/build/easyh10-1.5/libgetmediainfo'
make[2]: Leaving directory '/build/easyh10-1.5/libgetmediainfo'
Making install in cui
make[2]: Entering directory '/build/easyh10-1.5/cui'
make[3]: Entering directory '/build/easyh10-1.5/cui'
/bin/mkdir -p '/build/easyh10-1.5/debian/easyh10/usr/bin'
/bin/bash ../libtool --mode=install /usr/bin/install -c easyh10 '/build/easyh10-1.5/debian/easyh10/usr/bin'
libtool: install: /usr/bin/install -c easyh10 /build/easyh10-1.5/debian/easyh10/usr/bin/easyh10
/bin/mkdir -p '/build/easyh10-1.5/debian/easyh10/usr/share/man/man1'
/usr/bin/install -c -m 644 easyh10.1 '/build/easyh10-1.5/debian/easyh10/usr/share/man/man1'
make[3]: Leaving directory '/build/easyh10-1.5/cui'
make[2]: Leaving directory '/build/easyh10-1.5/cui'
make[2]: Entering directory '/build/easyh10-1.5'
make[3]: Entering directory '/build/easyh10-1.5'
make[3]: Nothing to be done for 'install-exec-am'.
/bin/mkdir -p '/build/easyh10-1.5/debian/easyh10/usr/share/doc/easyh10'
/usr/bin/install -c -m 644 README '/build/easyh10-1.5/debian/easyh10/usr/share/doc/easyh10'
/bin/mkdir -p '/build/easyh10-1.5/debian/easyh10/usr/share/easyh10/model'
/usr/bin/install -c -m 644 model/H10MTP_20GB_FW1.00-1.02.model model/H10MTP_20GB_FW2.51.model model/H10MTP_5GB_FW2.03-2.10.model model/H10MTP_5GB_FW2.51.model model/H10MTP_6GB_FW2.03-2.10.model model/H10MTP_6GB_FW2.51.model model/H10UMS_5GB_FW2.03.model model/H10UMS_5GB_FW2.04-2.51.model model/H10UMS_5GB_FW2.04-2.52.model model/H10UMS_6GB_FW2.03.model model/H10UMS_6GB_FW2.04-2.51.model model/H10UMS_6GB_FW2.04-2.52.model '/build/easyh10-1.5/debian/easyh10/usr/share/easyh10/model'
/bin/mkdir -p '/build/easyh10-1.5/debian/easyh10/usr/share/easyh10/model'
/usr/bin/install -c -m 644 tuner/berlin.de.fmr tuner/default.fmr tuner/dublin.ie.fmr tuner/tokyo.jp.fmr '/build/easyh10-1.5/debian/easyh10/usr/share/easyh10/model'
make[3]: Leaving directory '/build/easyh10-1.5'
make[2]: Leaving directory '/build/easyh10-1.5'
make[1]: Leaving directory '/build/easyh10-1.5'
dh_installdocs
dh_installchangelogs
dh_installman
dh_installmenu
dh_perl
dh_link
dh_strip_nondeterminism
dh_compress
dh_fixperms
dh_missing
dh_dwz -a
dh_strip -a
dh_makeshlibs -a
dh_shlibdeps -a
dh_installdeb
dh_gencontrol
dh_md5sums
dh_builddeb
dpkg-deb: building package 'easyh10' in '../easyh10_1.5-5_armhf.deb'.
dpkg-deb: building package 'easyh10-dbgsym' in '../easyh10-dbgsym_1.5-5_armhf.deb'.
dpkg-genbuildinfo --build=binary -O../easyh10_1.5-5_armhf.buildinfo
dpkg-genchanges --build=binary -O../easyh10_1.5-5_armhf.changes
dpkg-genchanges: info: binary-only upload (no source code included)
dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
dpkg-genchanges: info: not including original source code in upload
I: copying local configuration
I: unmounting dev/ptmx filesystem
I: unmounting dev/pts filesystem
I: unmounting dev/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
I: removing directory /srv/workspace/pbuilder/28082 and its subdirectories
I: Current time: Fri May 5 00:45:03 -12 2023
I: pbuilder-time-stamp: 1683290703
Fri May 5 12:45:12 UTC 2023 I: 1st build successful. Starting 2nd build on remote node jtx1c-armhf-rb.debian.net.
Fri May 5 12:45:12 UTC 2023 I: Preparing to do remote build '2' on jtx1c-armhf-rb.debian.net.
Fri May 5 12:49:16 UTC 2023 I: Deleting $TMPDIR on jtx1c-armhf-rb.debian.net.
Fri May 5 12:49:19 UTC 2023 I: easyh10_1.5-5_armhf.changes:
Format: 1.8
Date: Wed, 18 Aug 2021 18:02:33 -0400
Source: easyh10
Binary: easyh10 easyh10-dbgsym
Architecture: armhf
Version: 1.5-5
Distribution: unstable
Urgency: medium
Maintainer: Debian QA Group <packages@qa.debian.org>
Changed-By: Boyuan Yang <byang@debian.org>
Description:
easyh10 - Utility to manage the iRiver H10 music player
Changes:
easyh10 (1.5-5) unstable; urgency=medium
.
* QA upload.
* Orphan the package.
* Rebuild after Debian 11 release.
* debian/control:
+ Bump debhelper compat to v13.
+ Bump Standards-Version to 4.6.0.
+ Add Vcs-* fields for git packaging under Debian Salsa GitLab.
* debian/rules: Remove unnecessary dh-autoreconf.
Checksums-Sha1:
d8cc051d80af4c537e9111a4c7336a76f6eaa7c1 165304 easyh10-dbgsym_1.5-5_armhf.deb
42739caf288e5b915adebbe06ff82193086e23d1 5133 easyh10_1.5-5_armhf.buildinfo
65352bbbfb56e6969b9f175d6f29f0d273a07856 47976 easyh10_1.5-5_armhf.deb
Checksums-Sha256:
aa06447b02035b1dcefed7f6db4098a735763ef624d3a44cc074f5f636836ff1 165304 easyh10-dbgsym_1.5-5_armhf.deb
51916af4cd37cb999a5a3bb9e19bdde6ec92feaeed08fe3c018270626f28c0d2 5133 easyh10_1.5-5_armhf.buildinfo
a5ba2e8f2dbbc8159e5eeb263ecd2bb830297ec3bffedd7157b8c29cf996c4e0 47976 easyh10_1.5-5_armhf.deb
Files:
983b23d60c86f6bd2c0ba06691d323b3 165304 debug optional easyh10-dbgsym_1.5-5_armhf.deb
d46ea8580f0fb2007e318d240e42e895 5133 sound optional easyh10_1.5-5_armhf.buildinfo
0cc251628faee6bdebeed46f915936f8 47976 sound optional easyh10_1.5-5_armhf.deb
Fri May 5 12:49:20 UTC 2023 I: diffoscope 241 will be used to compare the two builds:
# Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.N87yfNDI/easyh10_1.5-5.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.N87yfNDI/easyh10_1.5-5.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.N87yfNDI/easyh10_1.5-5.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.N87yfNDI/b1/easyh10_1.5-5_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.N87yfNDI/b2/easyh10_1.5-5_armhf.changes
## command (total time: 0.000s)
0.000s 1 call cmp (internal)
## has_same_content_as (total time: 0.000s)
0.000s 1 call abc.DotChangesFile
## main (total time: 0.405s)
0.404s 2 calls outputs
0.000s 1 call cleanup
## recognizes (total time: 0.023s)
0.023s 12 calls diffoscope.comparators.binary.FilesystemFile
0.000s 10 calls abc.DotChangesFile
## specialize (total time: 0.000s)
0.000s 1 call specialize
Fri May 5 12:49:21 UTC 2023 I: diffoscope 241 found no differences in the changes files, and a .buildinfo file also exists.
Fri May 5 12:49:21 UTC 2023 I: easyh10 from bookworm built successfully and reproducibly on armhf.
Fri May 5 12:49:22 UTC 2023 I: Submitting .buildinfo files to external archives:
Fri May 5 12:49:22 UTC 2023 I: Submitting 8.0K b1/easyh10_1.5-5_armhf.buildinfo.asc
Fri May 5 12:49:23 UTC 2023 I: Submitting 8.0K b2/easyh10_1.5-5_armhf.buildinfo.asc
Fri May 5 12:49:24 UTC 2023 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit.
Fri May 5 12:49:24 UTC 2023 I: Done submitting .buildinfo files.
Fri May 5 12:49:24 UTC 2023 I: Removing signed easyh10_1.5-5_armhf.buildinfo.asc files:
removed './b1/easyh10_1.5-5_armhf.buildinfo.asc'
removed './b2/easyh10_1.5-5_armhf.buildinfo.asc'