Wed Aug 18 01:42:16 UTC 2021 I: starting to build gp2c/bullseye/arm64 on jenkins on '2021-08-18 01:42' Wed Aug 18 01:42:16 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_1/2733/console.log Wed Aug 18 01:42:16 UTC 2021 I: Downloading source for bullseye/gp2c=0.0.12-2 --2021-08-18 01:42:17-- http://cdn-fastly.deb.debian.org/debian/pool/main/g/gp2c/gp2c_0.0.12-2.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1936 (1.9K) Saving to: ‘gp2c_0.0.12-2.dsc’ 0K . 100% 135M=0s 2021-08-18 01:42:17 (135 MB/s) - ‘gp2c_0.0.12-2.dsc’ saved [1936/1936] Wed Aug 18 01:42:17 UTC 2021 I: gp2c_0.0.12-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: gp2c Binary: pari-gp2c Architecture: any Version: 0.0.12-2 Maintainer: Bill Allombert Standards-Version: 4.5.0 Build-Depends: debhelper-compat (= 12), libpari-dev (>= 2.11.0), pari-gp (>= 2.11.0) Package-List: pari-gp2c deb math optional arch=any Checksums-Sha1: b328fa61a1727e006f9fed4f886769c83009824a 872289 gp2c_0.0.12.orig.tar.gz a12f61f79609836cd57c35c11beec1925a2580c4 833 gp2c_0.0.12.orig.tar.gz.asc 88dcb5556188180c45cb6bdee4269f170637daf4 7600 gp2c_0.0.12-2.debian.tar.xz Checksums-Sha256: ee9ff63979670408d8c293902ce7ff6a825145f0e7e7c6323764733ef1b9310d 872289 gp2c_0.0.12.orig.tar.gz 38ec482252cc70334fa6474aad4b901131ffd8d8da537719c2af7109d57c395c 833 gp2c_0.0.12.orig.tar.gz.asc 71d663c8e96e6bcb90cc81c0d8018f5e80e1ab10b03be41435f7dfb27615f8fa 7600 gp2c_0.0.12-2.debian.tar.xz Files: ab29c383985d1b7d339189ecff31d40a 872289 gp2c_0.0.12.orig.tar.gz 5272144c938ee7ac37481e3db260f234 833 gp2c_0.0.12.orig.tar.gz.asc ab0a98b17b9236b3ccc2919b3d4f95ec 7600 gp2c_0.0.12-2.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEQgKOpASi6dgKxFMUjw58K0Ui44cFAmAVSvEACgkQjw58K0Ui 44ciPhAAtMpeXZiT/ch52/SwhipAoF4Yaw9+d3RkssKHm1RgCGHLx15oZAzDS9os koT/PGK5CFdUTrrNVKx3e1SdOLZm9QWbvY8Bc1PNx0yWjK3t3DNLo7Teg5mzeHGl sGFZWaZwOovW9Tlvo0yj2m7EquNb5+0d8rPNh95f5QOQBRbiczgNjxuDcdDeVTZ4 stT5MXGdG16LW1p5/L66k8xqsHsWwudOMrXxUBHtVV0kPYL/KXHX+UaOFdVYXbUS ZQCSPxGr9C54b+FgvcyGz0YcZlVFQEBoN/i58qcuqUHtsH7RStvE6j+veTiD+4xe bDzYS/Rf5nGAT0xSPfpd69nf15yafJn6VeQdkvvHE5a5G7PZgJ9YqeXWudzduYlN kSePr/RK3cebt7IpDO2ieGqju6sdVebcCC37BHqjP4rUtj6C5B3N341OHfWC4DGj /uT+XxI4grKNsQAD1xoXBTmjOd1veJmjUlqLIJOocbvs5KRJeZjrtipTaT2L4yzT T9oZeoKwjWsThWqa+xH4NqlI/xH2c5sMXAFCNCpSPy2XxVPhR3bUjVHmJWOkMHrZ OlNM/vX5vs+1GZeRHSuR2uhcECBgqAKVDSYZoLhxnIrLRYOMCtasSkbnJZ6fTtFd iv6uedKNFVRn//BLX4idiEsbEicYNWDjHSpRvVTpPLjXZCCdmm4= =/vEq -----END PGP SIGNATURE----- Wed Aug 18 01:42:17 UTC 2021 I: Checking whether the package is not for us Wed Aug 18 01:42:17 UTC 2021 I: Starting 1st build on remote node codethink9-arm64.debian.net. Wed Aug 18 01:42:17 UTC 2021 I: Preparing to do remote build '1' on codethink9-arm64.debian.net. Wed Aug 18 01:44:55 UTC 2021 I: Deleting $TMPDIR on codethink9-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Mon Sep 19 20:05:20 -12 2022 I: pbuilder-time-stamp: 1663661120 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [gp2c_0.0.12-2.dsc] I: copying [./gp2c_0.0.12.orig.tar.gz] I: copying [./gp2c_0.0.12.orig.tar.gz.asc] I: copying [./gp2c_0.0.12-2.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.mpAW6hNh/trustedkeys.kbx': General error gpgv: Signature made Sat Jan 30 00:02:57 2021 -12 gpgv: using RSA key 42028EA404A2E9D80AC453148F0E7C2B4522E387 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./gp2c_0.0.12-2.dsc dpkg-source: info: extracting gp2c in gp2c-0.0.12 dpkg-source: info: unpacking gp2c_0.0.12.orig.tar.gz dpkg-source: info: unpacking gp2c_0.0.12-2.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/14611/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=8' DISTRIBUTION='' HOME='/var/lib/jenkins' HOST_ARCH='arm64' IFS=' ' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='14611' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.y026hdj0GV/pbuilderrc_5YLF --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.y026hdj0GV/b1 --logfile b1/build.log gp2c_0.0.12-2.dsc' SUDO_GID='117' SUDO_UID='110' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' USERNAME='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.16:3128' I: uname -a Linux codethink9-arm64 4.15.0-154-generic #161-Ubuntu SMP Fri Jul 30 13:01:15 UTC 2021 aarch64 GNU/Linux I: ls -l /bin total 5252 -rwxr-xr-x 1 root root 1282512 Aug 4 2021 bash -rwxr-xr-x 3 root root 34808 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 34808 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 34808 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 14264 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 39832 Sep 22 2020 cat -rwxr-xr-x 1 root root 64512 Sep 22 2020 chgrp -rwxr-xr-x 1 root root 60368 Sep 22 2020 chmod -rwxr-xr-x 1 root root 64528 Sep 22 2020 chown -rwxr-xr-x 1 root root 138896 Sep 22 2020 cp -rwxr-xr-x 1 root root 129544 Dec 10 2020 dash -rwxr-xr-x 1 root root 101384 Sep 22 2020 date -rwxr-xr-x 1 root root 80984 Sep 22 2020 dd -rwxr-xr-x 1 root root 89824 Sep 22 2020 df -rwxr-xr-x 1 root root 143088 Sep 22 2020 dir -rwxr-xr-x 1 root root 76152 Jul 28 2021 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 35632 Sep 22 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 31512 Sep 22 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 64856 Jul 28 2021 findmnt -rwsr-xr-x 1 root root 34824 Feb 26 2021 fusermount -rwxr-xr-x 1 root root 178400 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 2021 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 2021 gzexe -rwxr-xr-x 1 root root 93744 Mar 2 2021 gzip -rwxr-xr-x 1 root root 18440 Nov 6 2019 hostname -rwxr-xr-x 1 root root 68720 Sep 22 2020 ln -rwxr-xr-x 1 root root 52720 Feb 7 2020 login -rwxr-xr-x 1 root root 143088 Sep 22 2020 ls -rwxr-xr-x 1 root root 161960 Jul 28 2021 lsblk -rwxr-xr-x 1 root root 85200 Sep 22 2020 mkdir -rwxr-xr-x 1 root root 68744 Sep 22 2020 mknod -rwxr-xr-x 1 root root 43976 Sep 22 2020 mktemp -rwxr-xr-x 1 root root 51368 Jul 28 2021 more -rwsr-xr-x 1 root root 51360 Jul 28 2021 mount -rwxr-xr-x 1 root root 14496 Jul 28 2021 mountpoint -rwxr-xr-x 1 root root 134808 Sep 22 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 2021 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 35720 Sep 22 2020 pwd lrwxrwxrwx 1 root root 4 Aug 4 2021 rbash -> bash -rwxr-xr-x 1 root root 43872 Sep 22 2020 readlink -rwxr-xr-x 1 root root 68592 Sep 22 2020 rm -rwxr-xr-x 1 root root 43880 Sep 22 2020 rmdir -rwxr-xr-x 1 root root 19208 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 114016 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Sep 18 03:48 sh -> dash -rwxr-xr-x 1 root root 35656 Sep 22 2020 sleep -rwxr-xr-x 1 root root 72640 Sep 22 2020 stty -rwsr-xr-x 1 root root 67776 Jul 28 2021 su -rwxr-xr-x 1 root root 35672 Sep 22 2020 sync -rwxr-xr-x 1 root root 535768 Feb 16 2021 tar -rwxr-xr-x 1 root root 10568 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 89120 Sep 22 2020 touch -rwxr-xr-x 1 root root 31512 Sep 22 2020 true -rwxr-xr-x 1 root root 14264 Feb 26 2021 ulockmgr_server -rwsr-xr-x 1 root root 30880 Jul 28 2021 umount -rwxr-xr-x 1 root root 35640 Sep 22 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 2021 uncompress -rwxr-xr-x 1 root root 143088 Sep 22 2020 vdir -rwxr-xr-x 1 root root 59584 Jul 28 2021 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 2021 zcat -rwxr-xr-x 1 root root 1678 Mar 2 2021 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 2021 zdiff -rwxr-xr-x 1 root root 29 Mar 2 2021 zegrep -rwxr-xr-x 1 root root 29 Mar 2 2021 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 2021 zforce -rwxr-xr-x 1 root root 7585 Mar 2 2021 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 2021 zless -rwxr-xr-x 1 root root 1842 Mar 2 2021 zmore -rwxr-xr-x 1 root root 4553 Mar 2 2021 znew I: user script /srv/workspace/pbuilder/14611/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 12), libpari-dev (>= 2.11.0), pari-gp (>= 2.11.0) dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19646 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 12); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libpari-dev (>= 2.11.0); however: Package libpari-dev is not installed. pbuilder-satisfydepends-dummy depends on pari-gp (>= 2.11.0); however: Package pari-gp is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbsd0{a} libdebhelper-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libicu67{a} libmagic-mgc{a} libmagic1{a} libmd0{a} libpari-dev{a} libpari-gmp-tls7{a} libpipeline1{a} libreadline8{a} libsigsegv2{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libx11-6{a} libx11-data{a} libxau6{a} libxcb1{a} libxdmcp6{a} libxml2{a} m4{a} man-db{a} pari-gp{a} po-debconf{a} readline-common{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx pari-doc pari-elldata pari-galdata pari-seadata wget 0 packages upgraded, 43 newly installed, 0 to remove and 0 not upgraded. Need to get 29.4 MB of archives. After unpacking 108 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main arm64 bsdextrautils arm64 2.36.1-8 [142 kB] Get: 2 http://deb.debian.org/debian bullseye/main arm64 libuchardet0 arm64 0.0.7-1 [67.9 kB] Get: 3 http://deb.debian.org/debian bullseye/main arm64 groff-base arm64 1.22.4-6 [883 kB] Get: 4 http://deb.debian.org/debian bullseye/main arm64 libpipeline1 arm64 1.5.3-1 [33.0 kB] Get: 5 http://deb.debian.org/debian bullseye/main arm64 man-db arm64 2.9.4-2 [1336 kB] Get: 6 http://deb.debian.org/debian bullseye/main arm64 readline-common all 8.1-1 [73.7 kB] Get: 7 http://deb.debian.org/debian bullseye/main arm64 libreadline8 arm64 8.1-1 [160 kB] Get: 8 http://deb.debian.org/debian bullseye/main arm64 sensible-utils all 0.0.14 [14.8 kB] Get: 9 http://deb.debian.org/debian bullseye/main arm64 libmagic-mgc arm64 1:5.39-3 [273 kB] Get: 10 http://deb.debian.org/debian bullseye/main arm64 libmagic1 arm64 1:5.39-3 [121 kB] Get: 11 http://deb.debian.org/debian bullseye/main arm64 file arm64 1:5.39-3 [69.1 kB] Get: 12 http://deb.debian.org/debian bullseye/main arm64 gettext-base arm64 0.21-4 [173 kB] Get: 13 http://deb.debian.org/debian bullseye/main arm64 libsigsegv2 arm64 2.13-1 [34.7 kB] Get: 14 http://deb.debian.org/debian bullseye/main arm64 m4 arm64 1.4.18-5 [199 kB] Get: 15 http://deb.debian.org/debian bullseye/main arm64 autoconf all 2.69-14 [313 kB] Get: 16 http://deb.debian.org/debian bullseye/main arm64 autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 17 http://deb.debian.org/debian bullseye/main arm64 automake all 1:1.16.3-2 [814 kB] Get: 18 http://deb.debian.org/debian bullseye/main arm64 autopoint all 0.21-4 [510 kB] Get: 19 http://deb.debian.org/debian bullseye/main arm64 libdebhelper-perl all 13.3.4 [189 kB] Get: 20 http://deb.debian.org/debian bullseye/main arm64 libtool all 2.4.6-15 [513 kB] Get: 21 http://deb.debian.org/debian bullseye/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 22 http://deb.debian.org/debian bullseye/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 23 http://deb.debian.org/debian bullseye/main arm64 libsub-override-perl all 0.09-2 [10.2 kB] Get: 24 http://deb.debian.org/debian bullseye/main arm64 libfile-stripnondeterminism-perl all 1.12.0-1 [26.3 kB] Get: 25 http://deb.debian.org/debian bullseye/main arm64 dh-strip-nondeterminism all 1.12.0-1 [15.4 kB] Get: 26 http://deb.debian.org/debian bullseye/main arm64 libelf1 arm64 0.183-1 [164 kB] Get: 27 http://deb.debian.org/debian bullseye/main arm64 dwz arm64 0.13+20210201-1 [155 kB] Get: 28 http://deb.debian.org/debian bullseye/main arm64 libicu67 arm64 67.1-7 [8467 kB] Get: 29 http://deb.debian.org/debian bullseye/main arm64 libxml2 arm64 2.9.10+dfsg-6.7 [629 kB] Get: 30 http://deb.debian.org/debian bullseye/main arm64 gettext arm64 0.21-4 [1261 kB] Get: 31 http://deb.debian.org/debian bullseye/main arm64 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 32 http://deb.debian.org/debian bullseye/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 33 http://deb.debian.org/debian bullseye/main arm64 debhelper all 13.3.4 [1049 kB] Get: 34 http://deb.debian.org/debian bullseye/main arm64 libmd0 arm64 1.0.3-3 [27.9 kB] Get: 35 http://deb.debian.org/debian bullseye/main arm64 libbsd0 arm64 0.11.3-1 [106 kB] Get: 36 http://deb.debian.org/debian bullseye/main arm64 libpari-gmp-tls7 arm64 2.13.1-1 [3090 kB] Get: 37 http://deb.debian.org/debian bullseye/main arm64 libpari-dev arm64 2.13.1-1 [3867 kB] Get: 38 http://deb.debian.org/debian bullseye/main arm64 libxau6 arm64 1:1.0.9-1 [19.7 kB] Get: 39 http://deb.debian.org/debian bullseye/main arm64 libxdmcp6 arm64 1:1.1.2-3 [25.4 kB] Get: 40 http://deb.debian.org/debian bullseye/main arm64 libxcb1 arm64 1.14-3 [138 kB] Get: 41 http://deb.debian.org/debian bullseye/main arm64 libx11-data all 2:1.7.2-1 [311 kB] Get: 42 http://deb.debian.org/debian bullseye/main arm64 libx11-6 arm64 2:1.7.2-1 [748 kB] Get: 43 http://deb.debian.org/debian bullseye/main arm64 pari-gp arm64 2.13.1-1 [2859 kB] Fetched 29.4 MB in 1s (21.8 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19646 files and directories currently installed.) Preparing to unpack .../00-bsdextrautils_2.36.1-8_arm64.deb ... Unpacking bsdextrautils (2.36.1-8) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../01-libuchardet0_0.0.7-1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../02-groff-base_1.22.4-6_arm64.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../03-libpipeline1_1.5.3-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../04-man-db_2.9.4-2_arm64.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package readline-common. Preparing to unpack .../05-readline-common_8.1-1_all.deb ... Unpacking readline-common (8.1-1) ... Selecting previously unselected package libreadline8:arm64. Preparing to unpack .../06-libreadline8_8.1-1_arm64.deb ... Unpacking libreadline8:arm64 (8.1-1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../07-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../08-libmagic-mgc_1%3a5.39-3_arm64.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:arm64. Preparing to unpack .../09-libmagic1_1%3a5.39-3_arm64.deb ... Unpacking libmagic1:arm64 (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../10-file_1%3a5.39-3_arm64.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../11-gettext-base_0.21-4_arm64.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package libsigsegv2:arm64. Preparing to unpack .../12-libsigsegv2_2.13-1_arm64.deb ... Unpacking libsigsegv2:arm64 (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../13-m4_1.4.18-5_arm64.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../14-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../15-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../16-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../17-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../18-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../19-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../20-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../21-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../22-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../23-libfile-stripnondeterminism-perl_1.12.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.12.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../24-dh-strip-nondeterminism_1.12.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.12.0-1) ... Selecting previously unselected package libelf1:arm64. Preparing to unpack .../25-libelf1_0.183-1_arm64.deb ... Unpacking libelf1:arm64 (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../26-dwz_0.13+20210201-1_arm64.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:arm64. Preparing to unpack .../27-libicu67_67.1-7_arm64.deb ... Unpacking libicu67:arm64 (67.1-7) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../28-libxml2_2.9.10+dfsg-6.7_arm64.deb ... Unpacking libxml2:arm64 (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.21-4_arm64.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package libmd0:arm64. Preparing to unpack .../33-libmd0_1.0.3-3_arm64.deb ... Unpacking libmd0:arm64 (1.0.3-3) ... Selecting previously unselected package libbsd0:arm64. Preparing to unpack .../34-libbsd0_0.11.3-1_arm64.deb ... Unpacking libbsd0:arm64 (0.11.3-1) ... Selecting previously unselected package libpari-gmp-tls7:arm64. Preparing to unpack .../35-libpari-gmp-tls7_2.13.1-1_arm64.deb ... Unpacking libpari-gmp-tls7:arm64 (2.13.1-1) ... Selecting previously unselected package libpari-dev:arm64. Preparing to unpack .../36-libpari-dev_2.13.1-1_arm64.deb ... Unpacking libpari-dev:arm64 (2.13.1-1) ... Selecting previously unselected package libxau6:arm64. Preparing to unpack .../37-libxau6_1%3a1.0.9-1_arm64.deb ... Unpacking libxau6:arm64 (1:1.0.9-1) ... Selecting previously unselected package libxdmcp6:arm64. Preparing to unpack .../38-libxdmcp6_1%3a1.1.2-3_arm64.deb ... Unpacking libxdmcp6:arm64 (1:1.1.2-3) ... Selecting previously unselected package libxcb1:arm64. Preparing to unpack .../39-libxcb1_1.14-3_arm64.deb ... Unpacking libxcb1:arm64 (1.14-3) ... Selecting previously unselected package libx11-data. Preparing to unpack .../40-libx11-data_2%3a1.7.2-1_all.deb ... Unpacking libx11-data (2:1.7.2-1) ... Selecting previously unselected package libx11-6:arm64. Preparing to unpack .../41-libx11-6_2%3a1.7.2-1_arm64.deb ... Unpacking libx11-6:arm64 (2:1.7.2-1) ... Selecting previously unselected package pari-gp. Preparing to unpack .../42-pari-gp_2.13.1-1_arm64.deb ... Unpacking pari-gp (2.13.1-1) ... Setting up libpipeline1:arm64 (1.5.3-1) ... Setting up libxau6:arm64 (1:1.0.9-1) ... Setting up bsdextrautils (2.36.1-8) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:arm64 (67.1-7) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libmagic1:arm64 (1:5.39-3) ... Setting up gettext-base (0.21-4) ... Setting up file (1:5.39-3) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up libx11-data (2:1.7.2-1) ... Setting up libsigsegv2:arm64 (2.13-1) ... Setting up autopoint (0.21-4) ... Setting up libmd0:arm64 (1.0.3-3) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:arm64 (0.0.7-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up libpari-gmp-tls7:arm64 (2.13.1-1) ... Setting up libbsd0:arm64 (0.11.3-1) ... Setting up libelf1:arm64 (0.183-1) ... Setting up readline-common (8.1-1) ... Setting up libxml2:arm64 (2.9.10+dfsg-6.7) ... Setting up libfile-stripnondeterminism-perl (1.12.0-1) ... Setting up libxdmcp6:arm64 (1:1.1.2-3) ... Setting up libxcb1:arm64 (1.14-3) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up libreadline8:arm64 (8.1-1) ... Setting up m4 (1.4.18-5) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up libpari-dev:arm64 (2.13.1-1) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.12.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up libx11-6:arm64 (2:1.7.2-1) ... Setting up pari-gp (2.13.1-1) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up debhelper (13.3.4) ... Processing triggers for libc-bin (2.31-13) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.25.3-1.1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/gp2c-0.0.12/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../gp2c_0.0.12-2_source.changes dpkg-buildpackage: info: source package gp2c dpkg-buildpackage: info: source version 0.0.12-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Bill Allombert dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf debian/rules override_dh_auto_configure make[1]: Entering directory '/build/gp2c-0.0.12' dh_auto_configure -- --with-paricfg=/usr/lib/aarch64-linux-gnu/pari/pari.cfg --with-paricfg-dbg=/usr/lib/aarch64-linux-gnu/pari/pari.cfg.dbg ./configure --build=aarch64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/aarch64-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --with-paricfg=/usr/lib/aarch64-linux-gnu/pari/pari.cfg --with-paricfg-dbg=/usr/lib/aarch64-linux-gnu/pari/pari.cfg.dbg checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... none checking for flex... no checking for lex... no checking for bison... no checking for byacc... no checking for perl... /usr/bin/perl checking for multiarch system... aarch64-linux-gnu checking for PARI configuration... /usr/lib/aarch64-linux-gnu/pari/pari.cfg checking for PARI configuration (debugging)... /usr/lib/aarch64-linux-gnu/pari/pari.cfg.dbg checking for PARI version... 2.13.1 (STABLE) checking for PARI module build... cc -c -o %s.o -g -O3 -Wall -fomit-frame-pointer -fno-strict-aliasing -fPIC -I\"/usr/include/aarch64-linux-gnu\" %s.c && cc -o %s.so -shared -g -O3 -Wall -fomit-frame-pointer -fno-strict-aliasing -fPIC -Wl,-shared -Wl,-z,relro %s.o -lc -lm -L/usr/lib/aarch64-linux-gnu -lpari checking for GP path... /usr/bin/gp checking for PARI data directory... /usr/share/pari checking for PARI description database... /usr/share/pari/pari.desc checking for PARI module build (debugging)... cc -c -o %s.o -g -O0 -Wall -fno-strict-aliasing -fPIC -I\"/usr/include/aarch64-linux-gnu\" %s.c && cc -o %s.so -shared -g -O0 -Wall -fno-strict-aliasing -fPIC -Wl,-shared -Wl,-z,relro %s.o -lc -lm -L/usr/lib/aarch64-linux-gnu -lpari checking for GP path (debugging)... /usr/bin/gp checking for RUNTEST (if needed)... checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking malloc.h usability... yes checking malloc.h presence... yes checking for malloc.h... yes checking for unistd.h... (cached) yes checking for an ANSI C-conforming const... yes checking for inline... inline checking for size_t... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for vprintf... yes checking for _doprnt... no checking for strdup... yes checking for strtol... yes checking for getopt... yes checking for strcmp... yes checking for memccpy... yes checking for strrchr... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating desc/Makefile config.status: creating doc/Makefile config.status: creating test/Makefile config.status: creating test2/Makefile config.status: creating test3/Makefile config.status: creating test4/Makefile config.status: creating scripts/Makefile config.status: creating scripts/822_desc.pl config.status: creating scripts/runtest config.status: creating scripts/dotest config.status: creating scripts/gp2c-run config.status: creating scripts/gp2c-dbg config.status: creating doc/gp2c-run.1 config.status: creating doc/gp2c-dbg.1 config.status: creating src/config.h config.status: executing depfiles commands config.status: executing default commands make[1]: Leaving directory '/build/gp2c-0.0.12' debian/rules override_dh_auto_build make[1]: Entering directory '/build/gp2c-0.0.12' /usr/bin/make make[2]: Entering directory '/build/gp2c-0.0.12' Making all in src make[3]: Entering directory '/build/gp2c-0.0.12/src' /usr/bin/make all-am make[4]: Entering directory '/build/gp2c-0.0.12/src' gcc -DHAVE_CONFIG_H -I. -DFUNCDSC_PATH=\"/usr/share/gp2c/func.dsc\" -Wall -g -O2 -c -o gp2c.o gp2c.c gcc -DHAVE_CONFIG_H -I. -DFUNCDSC_PATH=\"/usr/share/gp2c/func.dsc\" -Wall -g -O2 -c -o context.o context.c gcc -DHAVE_CONFIG_H -I. -DFUNCDSC_PATH=\"/usr/share/gp2c/func.dsc\" -Wall -g -O2 -c -o funcdesc.o funcdesc.c gcc -DHAVE_CONFIG_H -I. -DFUNCDSC_PATH=\"/usr/share/gp2c/func.dsc\" -Wall -g -O2 -c -o funcspec.o funcspec.c gcc -DHAVE_CONFIG_H -I. -DFUNCDSC_PATH=\"/usr/share/gp2c/func.dsc\" -Wall -g -O2 -c -o genblock.o genblock.c gcc -DHAVE_CONFIG_H -I. -DFUNCDSC_PATH=\"/usr/share/gp2c/func.dsc\" -Wall -g -O2 -c -o gencast.o gencast.c gcc -DHAVE_CONFIG_H -I. -DFUNCDSC_PATH=\"/usr/share/gp2c/func.dsc\" -Wall -g -O2 -c -o gencode.o gencode.c gcc -DHAVE_CONFIG_H -I. -DFUNCDSC_PATH=\"/usr/share/gp2c/func.dsc\" -Wall -g -O2 -c -o genfunc.o genfunc.c gcc -DHAVE_CONFIG_H -I. -DFUNCDSC_PATH=\"/usr/share/gp2c/func.dsc\" -Wall -g -O2 -c -o gentype.o gentype.c gcc -DHAVE_CONFIG_H -I. -DFUNCDSC_PATH=\"/usr/share/gp2c/func.dsc\" -Wall -g -O2 -c -o gerepile.o gerepile.c gcc -DHAVE_CONFIG_H -I. -DFUNCDSC_PATH=\"/usr/share/gp2c/func.dsc\" -Wall -g -O2 -c -o lang.o lang.c gcc -DHAVE_CONFIG_H -I. -DFUNCDSC_PATH=\"/usr/share/gp2c/func.dsc\" -Wall -g -O2 -c -o moveblock.o moveblock.c gcc -DHAVE_CONFIG_H -I. -DFUNCDSC_PATH=\"/usr/share/gp2c/func.dsc\" -Wall -g -O2 -c -o node.o node.c gcc -DHAVE_CONFIG_H -I. -DFUNCDSC_PATH=\"/usr/share/gp2c/func.dsc\" -Wall -g -O2 -c -o parse.o parse.c gcc -DHAVE_CONFIG_H -I. -DFUNCDSC_PATH=\"/usr/share/gp2c/func.dsc\" -Wall -g -O2 -c -o printnode.o printnode.c gcc -DHAVE_CONFIG_H -I. -DFUNCDSC_PATH=\"/usr/share/gp2c/func.dsc\" -Wall -g -O2 -c -o toplevel.o toplevel.c gcc -DHAVE_CONFIG_H -I. -DFUNCDSC_PATH=\"/usr/share/gp2c/func.dsc\" -Wall -g -O2 -c -o topfunc.o topfunc.c gcc -DHAVE_CONFIG_H -I. -DFUNCDSC_PATH=\"/usr/share/gp2c/func.dsc\" -Wall -g -O2 -c -o util.o util.c gcc -DHAVE_CONFIG_H -I. -DFUNCDSC_PATH=\"/usr/share/gp2c/func.dsc\" -Wall -g -O2 -c -o varlist.o varlist.c gcc -DHAVE_CONFIG_H -I. -DFUNCDSC_PATH=\"/usr/share/gp2c/func.dsc\" -Wall -g -O2 -c -o stack.o stack.c gcc -DFUNCDSC_PATH=\"/usr/share/gp2c/func.dsc\" -Wall -g -O2 -Wl,-z,relro -o gp2c gp2c.o context.o funcdesc.o funcspec.o genblock.o gencast.o gencode.o genfunc.o gentype.o gerepile.o lang.o moveblock.o node.o parse.o printnode.o toplevel.o topfunc.o util.o varlist.o stack.o make[4]: Leaving directory '/build/gp2c-0.0.12/src' make[3]: Leaving directory '/build/gp2c-0.0.12/src' Making all in desc make[3]: Entering directory '/build/gp2c-0.0.12/desc' Description recompiled make[3]: Leaving directory '/build/gp2c-0.0.12/desc' Making all in scripts make[3]: Entering directory '/build/gp2c-0.0.12/scripts' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/gp2c-0.0.12/scripts' Making all in doc make[3]: Entering directory '/build/gp2c-0.0.12/doc' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/gp2c-0.0.12/doc' Making all in test make[3]: Entering directory '/build/gp2c-0.0.12/test' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/gp2c-0.0.12/test' Making all in test2 make[3]: Entering directory '/build/gp2c-0.0.12/test2' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/gp2c-0.0.12/test2' Making all in test3 make[3]: Entering directory '/build/gp2c-0.0.12/test3' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/gp2c-0.0.12/test3' Making all in test4 make[3]: Entering directory '/build/gp2c-0.0.12/test4' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/gp2c-0.0.12/test4' make[3]: Entering directory '/build/gp2c-0.0.12' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/gp2c-0.0.12' make[2]: Leaving directory '/build/gp2c-0.0.12' /usr/bin/make -C doc make[2]: Entering directory '/build/gp2c-0.0.12/doc' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/gp2c-0.0.12/doc' make[1]: Leaving directory '/build/gp2c-0.0.12' dh_auto_test make -j8 check VERBOSE=1 make[1]: Entering directory '/build/gp2c-0.0.12' Making check in src make[2]: Entering directory '/build/gp2c-0.0.12/src' make check-am make[3]: Entering directory '/build/gp2c-0.0.12/src' make[3]: Leaving directory '/build/gp2c-0.0.12/src' make[2]: Leaving directory '/build/gp2c-0.0.12/src' Making check in desc make[2]: Entering directory '/build/gp2c-0.0.12/desc' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/gp2c-0.0.12/desc' Making check in scripts make[2]: Entering directory '/build/gp2c-0.0.12/scripts' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/gp2c-0.0.12/scripts' Making check in doc make[2]: Entering directory '/build/gp2c-0.0.12/doc' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/gp2c-0.0.12/doc' Making check in test make[2]: Entering directory '/build/gp2c-0.0.12/test' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/gp2c-0.0.12/test' Making check in test2 make[2]: Entering directory '/build/gp2c-0.0.12/test2' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/gp2c-0.0.12/test2' Making check in test3 make[2]: Entering directory '/build/gp2c-0.0.12/test3' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/gp2c-0.0.12/test3' Making check in test4 make[2]: Entering directory '/build/gp2c-0.0.12/test4' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/gp2c-0.0.12/test4' make[2]: Entering directory '/build/gp2c-0.0.12' make check-TESTS make[3]: Entering directory '/build/gp2c-0.0.12' Running test traditional Testing script affect...OK. Testing script args...OK. Testing script break...OK. Testing script cast...OK. Testing script cleanvar...OK. Testing script dot...OK. Testing script foreach...OK. Testing script forprime...OK. Testing script forstep...OK. Testing script forvec...OK. Testing script gerepile...OK. Testing script if...OK. Testing script initfunc...OK. Testing script install...OK. Testing script matrix...OK. Testing script member...OK. Testing script moveblock...OK. Testing script multiassign...OK. Testing script multiif...OK. Testing script print...OK. Testing script read...OK. Testing script return...OK. Testing script sumprod...OK. Testing script trunc...OK. Testing script upto...OK. Testing script vector...OK. Testing script while...OK. Running test closure Testing script apply...OK. Testing script call...OK. Testing script closure...OK. Testing script lambda...OK. Testing script printf...OK. Testing script sums...OK. Testing script vararg...OK. Running test ranges Testing script compr...OK. Testing script forpart...OK. Testing script forprime...OK. Testing script iferr...OK. Testing script range...OK. Running test iterators Testing script fordivfactored...OK. Testing script forperm...OK. Testing script forprimestep...OK. Testing script forsubset...OK. Testing script precision...OK. PASS: scripts/runtest ============= 1 test passed ============= make[3]: Leaving directory '/build/gp2c-0.0.12' make[2]: Leaving directory '/build/gp2c-0.0.12' make[1]: Leaving directory '/build/gp2c-0.0.12' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep debian/rules override_dh_auto_install make[1]: Entering directory '/build/gp2c-0.0.12' dh_auto_install -- PACKAGE_TARNAME=pari-gp2c make -j8 install DESTDIR=/build/gp2c-0.0.12/debian/pari-gp2c AM_UPDATE_INFO_DIR=no PACKAGE_TARNAME=pari-gp2c make[2]: Entering directory '/build/gp2c-0.0.12' Making install in src make[3]: Entering directory '/build/gp2c-0.0.12/src' make install-am make[4]: Entering directory '/build/gp2c-0.0.12/src' make[5]: Entering directory '/build/gp2c-0.0.12/src' make[5]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/build/gp2c-0.0.12/debian/pari-gp2c/usr/bin' /usr/bin/install -c gp2c '/build/gp2c-0.0.12/debian/pari-gp2c/usr/bin' make[5]: Leaving directory '/build/gp2c-0.0.12/src' make[4]: Leaving directory '/build/gp2c-0.0.12/src' make[3]: Leaving directory '/build/gp2c-0.0.12/src' Making install in desc make[3]: Entering directory '/build/gp2c-0.0.12/desc' make[4]: Entering directory '/build/gp2c-0.0.12/desc' make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/gp2c-0.0.12/debian/pari-gp2c/usr/share/gp2c' /usr/bin/install -c -m 644 func.dsc '/build/gp2c-0.0.12/debian/pari-gp2c/usr/share/gp2c' make[4]: Leaving directory '/build/gp2c-0.0.12/desc' make[3]: Leaving directory '/build/gp2c-0.0.12/desc' Making install in scripts make[3]: Entering directory '/build/gp2c-0.0.12/scripts' make[4]: Entering directory '/build/gp2c-0.0.12/scripts' make[4]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/build/gp2c-0.0.12/debian/pari-gp2c/usr/bin' /usr/bin/install -c gp2c-run gp2c-dbg '/build/gp2c-0.0.12/debian/pari-gp2c/usr/bin' make[4]: Leaving directory '/build/gp2c-0.0.12/scripts' make[3]: Leaving directory '/build/gp2c-0.0.12/scripts' Making install in doc make[3]: Entering directory '/build/gp2c-0.0.12/doc' make[4]: Entering directory '/build/gp2c-0.0.12/doc' make[4]: Nothing to be done for 'install-exec-am'. /usr/bin/install -c -d /build/gp2c-0.0.12/debian/pari-gp2c/usr/share/doc/pari-gp2c for i in gp2c.dvi gp2c.html gp2c001.png type.dvi type.html type001.png gp2c.pdf type.pdf; do \ if test -f ./$i; then \ /usr/bin/install -c -m 644 ./$i /build/gp2c-0.0.12/debian/pari-gp2c/usr/share/doc/pari-gp2c; \ fi \ done; /bin/mkdir -p '/build/gp2c-0.0.12/debian/pari-gp2c/usr/share/man/man1' /usr/bin/install -c -m 644 gp2c.1 gp2c-run.1 gp2c-dbg.1 '/build/gp2c-0.0.12/debian/pari-gp2c/usr/share/man/man1' make[4]: Leaving directory '/build/gp2c-0.0.12/doc' make[3]: Leaving directory '/build/gp2c-0.0.12/doc' Making install in test make[3]: Entering directory '/build/gp2c-0.0.12/test' make[4]: Entering directory '/build/gp2c-0.0.12/test' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/gp2c-0.0.12/test' make[3]: Leaving directory '/build/gp2c-0.0.12/test' Making install in test2 make[3]: Entering directory '/build/gp2c-0.0.12/test2' make[4]: Entering directory '/build/gp2c-0.0.12/test2' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/gp2c-0.0.12/test2' make[3]: Leaving directory '/build/gp2c-0.0.12/test2' Making install in test3 make[3]: Entering directory '/build/gp2c-0.0.12/test3' make[4]: Entering directory '/build/gp2c-0.0.12/test3' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/gp2c-0.0.12/test3' make[3]: Leaving directory '/build/gp2c-0.0.12/test3' Making install in test4 make[3]: Entering directory '/build/gp2c-0.0.12/test4' make[4]: Entering directory '/build/gp2c-0.0.12/test4' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/gp2c-0.0.12/test4' make[3]: Leaving directory '/build/gp2c-0.0.12/test4' make[3]: Entering directory '/build/gp2c-0.0.12' make[4]: Entering directory '/build/gp2c-0.0.12' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/gp2c-0.0.12' make[3]: Leaving directory '/build/gp2c-0.0.12' make[2]: Leaving directory '/build/gp2c-0.0.12' make[1]: Leaving directory '/build/gp2c-0.0.12' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism debian/rules override_dh_compress make[1]: Entering directory '/build/gp2c-0.0.12' dh_compress -X.pdf make[1]: Leaving directory '/build/gp2c-0.0.12' dh_fixperms dh_missing dh_dwz dh_strip dh_makeshlibs dh_shlibdeps dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'pari-gp2c' in '../pari-gp2c_0.0.12-2_arm64.deb'. dpkg-deb: building package 'pari-gp2c-dbgsym' in '../pari-gp2c-dbgsym_0.0.12-2_arm64.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../gp2c_0.0.12-2_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/14611 and its subdirectories I: Current time: Mon Sep 19 20:07:54 -12 2022 I: pbuilder-time-stamp: 1663661274 Wed Aug 18 01:44:55 UTC 2021 I: 1st build successful. Starting 2nd build on remote node codethink10-arm64.debian.net. Wed Aug 18 01:44:55 UTC 2021 I: Preparing to do remote build '2' on codethink10-arm64.debian.net. Wed Aug 18 01:47:01 UTC 2021 I: Deleting $TMPDIR on codethink10-arm64.debian.net. Wed Aug 18 01:47:02 UTC 2021 I: gp2c_0.0.12-2_arm64.changes: Format: 1.8 Date: Thu, 28 Jan 2021 13:36:43 +0100 Source: gp2c Binary: pari-gp2c pari-gp2c-dbgsym Architecture: arm64 Version: 0.0.12-2 Distribution: unstable Urgency: medium Maintainer: Bill Allombert Changed-By: Bill Allombert Description: pari-gp2c - PARI/GP GP to C compiler Changes: gp2c (0.0.12-2) unstable; urgency=medium . * Rebuild with pari 2.13.1 for up-to-date func.dsc Checksums-Sha1: e6e515a6e58d92cbcabadc4b438ebae629370a61 5145 gp2c_0.0.12-2_arm64.buildinfo c81e39feea890295134ca5d7d600b4833a1015ba 193108 pari-gp2c-dbgsym_0.0.12-2_arm64.deb 63900e45930dbfba5a6f98b88f8b1a3025635d81 562956 pari-gp2c_0.0.12-2_arm64.deb Checksums-Sha256: a894c1b042b2fbe6c70001b4f03e2be6085ceff276f2acfa1526dd923cc9baaa 5145 gp2c_0.0.12-2_arm64.buildinfo 7c24d55d6a1c784cac51ffae12893cd6b751a4357029c80b5041621d444e9054 193108 pari-gp2c-dbgsym_0.0.12-2_arm64.deb 0c7c0335a74a75c197753af484ae5e156b3a1c5e9819bed785d85a11a0f172e4 562956 pari-gp2c_0.0.12-2_arm64.deb Files: bb45febdccf9308f32d51e10fd0a21c9 5145 math optional gp2c_0.0.12-2_arm64.buildinfo d2445ec4293510a09b66d9e2859a8c05 193108 debug optional pari-gp2c-dbgsym_0.0.12-2_arm64.deb 4bd09126a030ca1b2242c86f9f2f6d03 562956 math optional pari-gp2c_0.0.12-2_arm64.deb Wed Aug 18 01:47:05 UTC 2021 I: diffoscope 177 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.y026hdj0GV/gp2c_0.0.12-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.y026hdj0GV/gp2c_0.0.12-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.y026hdj0GV/gp2c_0.0.12-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.y026hdj0GV/b1/gp2c_0.0.12-2_arm64.changes /srv/reproducible-results/rbuild-debian/tmp.y026hdj0GV/b2/gp2c_0.0.12-2_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 2.537s) 2.537s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.248s) 0.248s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Wed Aug 18 01:48:33 UTC 2021 I: diffoscope 177 found no differences in the changes files, and a .buildinfo file also exists. Wed Aug 18 01:48:33 UTC 2021 I: gp2c from bullseye built successfully and reproducibly on arm64. Wed Aug 18 01:48:38 UTC 2021 I: Submitting .buildinfo files to external archives: Wed Aug 18 01:48:38 UTC 2021 I: Submitting 8.0K b1/gp2c_0.0.12-2_arm64.buildinfo.asc Wed Aug 18 01:48:40 UTC 2021 I: Submitting 8.0K b2/gp2c_0.0.12-2_arm64.buildinfo.asc Wed Aug 18 01:48:46 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Wed Aug 18 01:48:46 UTC 2021 I: Done submitting .buildinfo files. Wed Aug 18 01:48:46 UTC 2021 I: Removing signed gp2c_0.0.12-2_arm64.buildinfo.asc files: removed './b1/gp2c_0.0.12-2_arm64.buildinfo.asc' removed './b2/gp2c_0.0.12-2_arm64.buildinfo.asc'