Fri Aug 27 01:21:14 UTC 2021 I: starting to build uronode/bullseye/arm64 on jenkins on '2021-08-27 01:21'
Fri Aug 27 01:21:14 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_31/25493/console.log
Fri Aug 27 01:21:14 UTC 2021 I: Downloading source for bullseye/uronode=2.13-2
--2021-08-27 01:21:15-- http://cdn-fastly.deb.debian.org/debian/pool/main/u/uronode/uronode_2.13-2.dsc
Connecting to 78.137.99.97:3128... connected.
Proxy request sent, awaiting response... 200 OK
Length: 1580 (1.5K)
Saving to: ‘uronode_2.13-2.dsc’
0K . 100% 628K=0.002s
2021-08-27 01:21:15 (628 KB/s) - ‘uronode_2.13-2.dsc’ saved [1580/1580]
Fri Aug 27 01:21:15 UTC 2021 I: uronode_2.13-2.dsc
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 3.0 (quilt)
Source: uronode
Binary: uronode
Architecture: linux-any
Version: 2.13-2
Maintainer: Debian Hamradio Maintainers <debian-hams@lists.debian.org>
Uploaders: Dave Hibberd <d@vehibberd.com>
Homepage: https://uronode.sourceforge.net/
Standards-Version: 4.5.1
Vcs-Browser: https://salsa.debian.org/debian-hamradio-team/uronode
Vcs-Git: https://salsa.debian.org/debian-hamradio-team/uronode.git
Build-Depends: debhelper-compat (= 13), libax25-dev
Package-List:
uronode deb hamradio optional arch=linux-any
Checksums-Sha1:
b01a57839653163fe616ba35f2dd15bcba618343 211276 uronode_2.13.orig.tar.gz
a2f9acc6617cf5ec05f3816428a37c941994a347 4772 uronode_2.13-2.debian.tar.xz
Checksums-Sha256:
1c790548c3e65387318d0d4e8b5c08c06b9668ca69c209a5a0b3139d0159be3a 211276 uronode_2.13.orig.tar.gz
13578e490771317b2edb317b079909a39d0af445ffb67b298b9d94ed895089f5 4772 uronode_2.13-2.debian.tar.xz
Files:
e62d961043916d72468db0abdf94a6b6 211276 uronode_2.13.orig.tar.gz
a2dc4d08fdf4a64105da6bbc17f838c0 4772 uronode_2.13-2.debian.tar.xz
-----BEGIN PGP SIGNATURE-----
iQEzBAEBCgAdFiEERzSH56pa+zBfre1AiVnjPMqARLoFAmAYoCAACgkQiVnjPMqA
RLrSjQf/UFLfWx1nF4SIh/Qeu/OatUCgQLNlTIH6g14HwUAkHMOHGzUqAqJmtx4F
ENsCbaAqgNlGWZe1lsnF0u6CZL4Jqkhzu6vd1f3W6Ai4eMB5FDUwfrJQwtpblZ+/
6/F3Uttd2JyfhnUHmbyew/bhknvVnub13ATDPrgeh2QF5EDh8wjDSsz0zC5jpT2x
L+fJjFUEhLet6E+yHzGSHu9lr11wBHTKHInI8jm46wG+llUsN/E18pQ2H9Th6qB1
3mXddfV/9GJqQK3+X0rCElEno5Sjo3eZ8T7WtieP6Hg/h61Pa8YychIPbgMd+eM4
hAsCyGp3yDqWS07usMdMaHwBeUNzqQ==
=wsPJ
-----END PGP SIGNATURE-----
Fri Aug 27 01:21:15 UTC 2021 I: Checking whether the package is not for us
Fri Aug 27 01:21:15 UTC 2021 I: Starting 1st build on remote node codethink16-arm64.debian.net.
Fri Aug 27 01:21:15 UTC 2021 I: Preparing to do remote build '1' on codethink16-arm64.debian.net.
Fri Aug 27 01:21:55 UTC 2021 I: Deleting $TMPDIR on codethink16-arm64.debian.net.
I: pbuilder: network access will be disabled during build
I: Current time: Thu Aug 26 13:21:17 -12 2021
I: pbuilder-time-stamp: 1630027277
I: Building the build Environment
I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz]
I: copying local configuration
I: mounting /proc filesystem
I: mounting /sys filesystem
I: creating /{dev,run}/shm
I: mounting /dev/pts filesystem
I: redirecting /dev/ptmx to /dev/pts/ptmx
I: policy-rc.d already exists
I: Copying source file
I: copying [uronode_2.13-2.dsc]
I: copying [./uronode_2.13.orig.tar.gz]
I: copying [./uronode_2.13-2.debian.tar.xz]
I: Extracting source
gpgv: unknown type of key resource 'trustedkeys.kbx'
gpgv: keyblock resource '/tmp/dpkg-verify-sig.vT6yPGhv/trustedkeys.kbx': General error
gpgv: Signature made Mon Feb 1 12:43:12 2021 -12
gpgv: using RSA key 473487E7AA5AFB305FADED408959E33CCA8044BA
gpgv: Can't check signature: No public key
dpkg-source: warning: failed to verify signature on ./uronode_2.13-2.dsc
dpkg-source: info: extracting uronode in uronode-2.13
dpkg-source: info: unpacking uronode_2.13.orig.tar.gz
dpkg-source: info: unpacking uronode_2.13-2.debian.tar.xz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: applying multiple-definition.patch
dpkg-source: info: applying non-interactive-install.patch
dpkg-source: info: applying hardening
dpkg-source: info: applying folder-update
dpkg-source: info: applying install-dir-creation
I: Not using root during the build.
I: Installing the build-deps
I: user script /srv/workspace/pbuilder/14176/tmp/hooks/D02_print_environment starting
I: set
BUILDDIR='/build'
BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other'
BUILDUSERNAME='pbuilder1'
BUILD_ARCH='arm64'
DEBIAN_FRONTEND='noninteractive'
DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=8'
DISTRIBUTION=''
HOME='/var/lib/jenkins'
HOST_ARCH='arm64'
IFS='
'
LANG='C'
LANGUAGE='en_US:en'
LC_ALL='C'
MAIL='/var/mail/root'
OPTIND='1'
PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games'
PBCURRENTCOMMANDLINEOPERATION='build'
PBUILDER_OPERATION='build'
PBUILDER_PKGDATADIR='/usr/share/pbuilder'
PBUILDER_PKGLIBDIR='/usr/lib/pbuilder'
PBUILDER_SYSCONFDIR='/etc'
PPID='14176'
PS1='# '
PS2='> '
PS4='+ '
PWD='/'
SHELL='/bin/bash'
SHLVL='2'
SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.V8vXEjv6rD/pbuilderrc_AdeD --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.V8vXEjv6rD/b1 --logfile b1/build.log uronode_2.13-2.dsc'
SUDO_GID='117'
SUDO_UID='110'
SUDO_USER='jenkins'
TERM='unknown'
TZ='/usr/share/zoneinfo/Etc/GMT+12'
USER='root'
USERNAME='root'
_='/usr/bin/systemd-run'
http_proxy='http://192.168.101.16:3128'
I: uname -a
Linux codethink16-arm64 4.15.0-154-generic #161-Ubuntu SMP Fri Jul 30 13:01:15 UTC 2021 aarch64 GNU/Linux
I: ls -l /bin
total 5252
-rwxr-xr-x 1 root root 1282512 Aug 4 08:25 bash
-rwxr-xr-x 3 root root 34808 Jul 20 2020 bunzip2
-rwxr-xr-x 3 root root 34808 Jul 20 2020 bzcat
lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff
-rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff
lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep
-rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe
lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep
-rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep
-rwxr-xr-x 3 root root 34808 Jul 20 2020 bzip2
-rwxr-xr-x 1 root root 14264 Jul 20 2020 bzip2recover
lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore
-rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore
-rwxr-xr-x 1 root root 39832 Sep 22 2020 cat
-rwxr-xr-x 1 root root 64512 Sep 22 2020 chgrp
-rwxr-xr-x 1 root root 60368 Sep 22 2020 chmod
-rwxr-xr-x 1 root root 64528 Sep 22 2020 chown
-rwxr-xr-x 1 root root 138896 Sep 22 2020 cp
-rwxr-xr-x 1 root root 129544 Dec 10 2020 dash
-rwxr-xr-x 1 root root 101384 Sep 22 2020 date
-rwxr-xr-x 1 root root 80984 Sep 22 2020 dd
-rwxr-xr-x 1 root root 89824 Sep 22 2020 df
-rwxr-xr-x 1 root root 143088 Sep 22 2020 dir
-rwxr-xr-x 1 root root 76152 Jul 28 07:09 dmesg
lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname
lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname
-rwxr-xr-x 1 root root 35632 Sep 22 2020 echo
-rwxr-xr-x 1 root root 28 Nov 9 2020 egrep
-rwxr-xr-x 1 root root 31512 Sep 22 2020 false
-rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep
-rwxr-xr-x 1 root root 64856 Jul 28 07:09 findmnt
-rwsr-xr-x 1 root root 34824 Feb 26 04:12 fusermount
-rwxr-xr-x 1 root root 178400 Nov 9 2020 grep
-rwxr-xr-x 2 root root 2346 Mar 2 11:30 gunzip
-rwxr-xr-x 1 root root 6376 Mar 2 11:30 gzexe
-rwxr-xr-x 1 root root 93744 Mar 2 11:30 gzip
-rwxr-xr-x 1 root root 18440 Nov 6 2019 hostname
-rwxr-xr-x 1 root root 68720 Sep 22 2020 ln
-rwxr-xr-x 1 root root 52720 Feb 7 2020 login
-rwxr-xr-x 1 root root 143088 Sep 22 2020 ls
-rwxr-xr-x 1 root root 161960 Jul 28 07:09 lsblk
-rwxr-xr-x 1 root root 85200 Sep 22 2020 mkdir
-rwxr-xr-x 1 root root 68744 Sep 22 2020 mknod
-rwxr-xr-x 1 root root 43976 Sep 22 2020 mktemp
-rwxr-xr-x 1 root root 51368 Jul 28 07:09 more
-rwsr-xr-x 1 root root 51360 Jul 28 07:09 mount
-rwxr-xr-x 1 root root 14496 Jul 28 07:09 mountpoint
-rwxr-xr-x 1 root root 134808 Sep 22 2020 mv
lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname
lrwxrwxrwx 1 root root 14 Apr 18 03:38 pidof -> /sbin/killall5
-rwxr-xr-x 1 root root 35720 Sep 22 2020 pwd
lrwxrwxrwx 1 root root 4 Aug 4 08:25 rbash -> bash
-rwxr-xr-x 1 root root 43872 Sep 22 2020 readlink
-rwxr-xr-x 1 root root 68592 Sep 22 2020 rm
-rwxr-xr-x 1 root root 43880 Sep 22 2020 rmdir
-rwxr-xr-x 1 root root 19208 Sep 27 2020 run-parts
-rwxr-xr-x 1 root root 114016 Dec 22 2018 sed
lrwxrwxrwx 1 root root 4 Aug 20 21:25 sh -> dash
-rwxr-xr-x 1 root root 35656 Sep 22 2020 sleep
-rwxr-xr-x 1 root root 72640 Sep 22 2020 stty
-rwsr-xr-x 1 root root 67776 Jul 28 07:09 su
-rwxr-xr-x 1 root root 35672 Sep 22 2020 sync
-rwxr-xr-x 1 root root 535768 Feb 16 2021 tar
-rwxr-xr-x 1 root root 10568 Sep 27 2020 tempfile
-rwxr-xr-x 1 root root 89120 Sep 22 2020 touch
-rwxr-xr-x 1 root root 31512 Sep 22 2020 true
-rwxr-xr-x 1 root root 14264 Feb 26 04:12 ulockmgr_server
-rwsr-xr-x 1 root root 30880 Jul 28 07:09 umount
-rwxr-xr-x 1 root root 35640 Sep 22 2020 uname
-rwxr-xr-x 2 root root 2346 Mar 2 11:30 uncompress
-rwxr-xr-x 1 root root 143088 Sep 22 2020 vdir
-rwxr-xr-x 1 root root 59584 Jul 28 07:09 wdctl
lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname
-rwxr-xr-x 1 root root 1984 Mar 2 11:30 zcat
-rwxr-xr-x 1 root root 1678 Mar 2 11:30 zcmp
-rwxr-xr-x 1 root root 5880 Mar 2 11:30 zdiff
-rwxr-xr-x 1 root root 29 Mar 2 11:30 zegrep
-rwxr-xr-x 1 root root 29 Mar 2 11:30 zfgrep
-rwxr-xr-x 1 root root 2081 Mar 2 11:30 zforce
-rwxr-xr-x 1 root root 7585 Mar 2 11:30 zgrep
-rwxr-xr-x 1 root root 2206 Mar 2 11:30 zless
-rwxr-xr-x 1 root root 1842 Mar 2 11:30 zmore
-rwxr-xr-x 1 root root 4553 Mar 2 11:30 znew
I: user script /srv/workspace/pbuilder/14176/tmp/hooks/D02_print_environment finished
-> Attempting to satisfy build-dependencies
-> Creating pbuilder-satisfydepends-dummy package
Package: pbuilder-satisfydepends-dummy
Version: 0.invalid.0
Architecture: arm64
Maintainer: Debian Pbuilder Team <pbuilder-maint@lists.alioth.debian.org>
Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder
This package was created automatically by pbuilder to satisfy the
build-dependencies of the package being currently built.
Depends: debhelper-compat (= 13), libax25-dev
dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'.
Selecting previously unselected package pbuilder-satisfydepends-dummy.
(Reading database ... 19646 files and directories currently installed.)
Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ...
Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ...
dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested:
pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however:
Package debhelper-compat is not installed.
pbuilder-satisfydepends-dummy depends on libax25-dev; however:
Package libax25-dev is not installed.
Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ...
Reading package lists...
Building dependency tree...
Reading state information...
Initializing package states...
Writing extended state information...
Building tag database...
pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0)
pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0)
The following NEW packages will be installed:
autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libax25{a} libax25-dev{a} libdebhelper-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libicu67{a} libmagic-mgc{a} libmagic1{a} libpipeline1{a} libsigsegv2{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a}
The following packages are RECOMMENDED but will NOT be installed:
curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget
0 packages upgraded, 33 newly installed, 0 to remove and 0 not upgraded.
Need to get 18.0 MB of archives. After unpacking 67.6 MB will be used.
Writing extended state information...
Get: 1 http://deb.debian.org/debian bullseye/main arm64 bsdextrautils arm64 2.36.1-8 [142 kB]
Get: 2 http://deb.debian.org/debian bullseye/main arm64 libuchardet0 arm64 0.0.7-1 [67.9 kB]
Get: 3 http://deb.debian.org/debian bullseye/main arm64 groff-base arm64 1.22.4-6 [883 kB]
Get: 4 http://deb.debian.org/debian bullseye/main arm64 libpipeline1 arm64 1.5.3-1 [33.0 kB]
Get: 5 http://deb.debian.org/debian bullseye/main arm64 man-db arm64 2.9.4-2 [1336 kB]
Get: 6 http://deb.debian.org/debian bullseye/main arm64 sensible-utils all 0.0.14 [14.8 kB]
Get: 7 http://deb.debian.org/debian bullseye/main arm64 libmagic-mgc arm64 1:5.39-3 [273 kB]
Get: 8 http://deb.debian.org/debian bullseye/main arm64 libmagic1 arm64 1:5.39-3 [121 kB]
Get: 9 http://deb.debian.org/debian bullseye/main arm64 file arm64 1:5.39-3 [69.1 kB]
Get: 10 http://deb.debian.org/debian bullseye/main arm64 gettext-base arm64 0.21-4 [173 kB]
Get: 11 http://deb.debian.org/debian bullseye/main arm64 libsigsegv2 arm64 2.13-1 [34.7 kB]
Get: 12 http://deb.debian.org/debian bullseye/main arm64 m4 arm64 1.4.18-5 [199 kB]
Get: 13 http://deb.debian.org/debian bullseye/main arm64 autoconf all 2.69-14 [313 kB]
Get: 14 http://deb.debian.org/debian bullseye/main arm64 autotools-dev all 20180224.1+nmu1 [77.1 kB]
Get: 15 http://deb.debian.org/debian bullseye/main arm64 automake all 1:1.16.3-2 [814 kB]
Get: 16 http://deb.debian.org/debian bullseye/main arm64 autopoint all 0.21-4 [510 kB]
Get: 17 http://deb.debian.org/debian bullseye/main arm64 libdebhelper-perl all 13.3.4 [189 kB]
Get: 18 http://deb.debian.org/debian bullseye/main arm64 libtool all 2.4.6-15 [513 kB]
Get: 19 http://deb.debian.org/debian bullseye/main arm64 dh-autoreconf all 20 [17.1 kB]
Get: 20 http://deb.debian.org/debian bullseye/main arm64 libarchive-zip-perl all 1.68-1 [104 kB]
Get: 21 http://deb.debian.org/debian bullseye/main arm64 libsub-override-perl all 0.09-2 [10.2 kB]
Get: 22 http://deb.debian.org/debian bullseye/main arm64 libfile-stripnondeterminism-perl all 1.12.0-1 [26.3 kB]
Get: 23 http://deb.debian.org/debian bullseye/main arm64 dh-strip-nondeterminism all 1.12.0-1 [15.4 kB]
Get: 24 http://deb.debian.org/debian bullseye/main arm64 libelf1 arm64 0.183-1 [164 kB]
Get: 25 http://deb.debian.org/debian bullseye/main arm64 dwz arm64 0.13+20210201-1 [155 kB]
Get: 26 http://deb.debian.org/debian bullseye/main arm64 libicu67 arm64 67.1-7 [8467 kB]
Get: 27 http://deb.debian.org/debian bullseye/main arm64 libxml2 arm64 2.9.10+dfsg-6.7 [629 kB]
Get: 28 http://deb.debian.org/debian bullseye/main arm64 gettext arm64 0.21-4 [1261 kB]
Get: 29 http://deb.debian.org/debian bullseye/main arm64 intltool-debian all 0.35.0+20060710.5 [26.8 kB]
Get: 30 http://deb.debian.org/debian bullseye/main arm64 po-debconf all 1.0.21+nmu1 [248 kB]
Get: 31 http://deb.debian.org/debian bullseye/main arm64 debhelper all 13.3.4 [1049 kB]
Get: 32 http://deb.debian.org/debian bullseye/main arm64 libax25 arm64 0.0.12-rc5+git20190411+b17ff36-3 [25.8 kB]
Get: 33 http://deb.debian.org/debian bullseye/main arm64 libax25-dev arm64 0.0.12-rc5+git20190411+b17ff36-3 [27.8 kB]
Fetched 18.0 MB in 0s (50.8 MB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package bsdextrautils.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 19646 files and directories currently installed.)
Preparing to unpack .../00-bsdextrautils_2.36.1-8_arm64.deb ...
Unpacking bsdextrautils (2.36.1-8) ...
Selecting previously unselected package libuchardet0:arm64.
Preparing to unpack .../01-libuchardet0_0.0.7-1_arm64.deb ...
Unpacking libuchardet0:arm64 (0.0.7-1) ...
Selecting previously unselected package groff-base.
Preparing to unpack .../02-groff-base_1.22.4-6_arm64.deb ...
Unpacking groff-base (1.22.4-6) ...
Selecting previously unselected package libpipeline1:arm64.
Preparing to unpack .../03-libpipeline1_1.5.3-1_arm64.deb ...
Unpacking libpipeline1:arm64 (1.5.3-1) ...
Selecting previously unselected package man-db.
Preparing to unpack .../04-man-db_2.9.4-2_arm64.deb ...
Unpacking man-db (2.9.4-2) ...
Selecting previously unselected package sensible-utils.
Preparing to unpack .../05-sensible-utils_0.0.14_all.deb ...
Unpacking sensible-utils (0.0.14) ...
Selecting previously unselected package libmagic-mgc.
Preparing to unpack .../06-libmagic-mgc_1%3a5.39-3_arm64.deb ...
Unpacking libmagic-mgc (1:5.39-3) ...
Selecting previously unselected package libmagic1:arm64.
Preparing to unpack .../07-libmagic1_1%3a5.39-3_arm64.deb ...
Unpacking libmagic1:arm64 (1:5.39-3) ...
Selecting previously unselected package file.
Preparing to unpack .../08-file_1%3a5.39-3_arm64.deb ...
Unpacking file (1:5.39-3) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../09-gettext-base_0.21-4_arm64.deb ...
Unpacking gettext-base (0.21-4) ...
Selecting previously unselected package libsigsegv2:arm64.
Preparing to unpack .../10-libsigsegv2_2.13-1_arm64.deb ...
Unpacking libsigsegv2:arm64 (2.13-1) ...
Selecting previously unselected package m4.
Preparing to unpack .../11-m4_1.4.18-5_arm64.deb ...
Unpacking m4 (1.4.18-5) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../12-autoconf_2.69-14_all.deb ...
Unpacking autoconf (2.69-14) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../13-autotools-dev_20180224.1+nmu1_all.deb ...
Unpacking autotools-dev (20180224.1+nmu1) ...
Selecting previously unselected package automake.
Preparing to unpack .../14-automake_1%3a1.16.3-2_all.deb ...
Unpacking automake (1:1.16.3-2) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../15-autopoint_0.21-4_all.deb ...
Unpacking autopoint (0.21-4) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../16-libdebhelper-perl_13.3.4_all.deb ...
Unpacking libdebhelper-perl (13.3.4) ...
Selecting previously unselected package libtool.
Preparing to unpack .../17-libtool_2.4.6-15_all.deb ...
Unpacking libtool (2.4.6-15) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../18-dh-autoreconf_20_all.deb ...
Unpacking dh-autoreconf (20) ...
Selecting previously unselected package libarchive-zip-perl.
Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ...
Unpacking libarchive-zip-perl (1.68-1) ...
Selecting previously unselected package libsub-override-perl.
Preparing to unpack .../20-libsub-override-perl_0.09-2_all.deb ...
Unpacking libsub-override-perl (0.09-2) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../21-libfile-stripnondeterminism-perl_1.12.0-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.12.0-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../22-dh-strip-nondeterminism_1.12.0-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.12.0-1) ...
Selecting previously unselected package libelf1:arm64.
Preparing to unpack .../23-libelf1_0.183-1_arm64.deb ...
Unpacking libelf1:arm64 (0.183-1) ...
Selecting previously unselected package dwz.
Preparing to unpack .../24-dwz_0.13+20210201-1_arm64.deb ...
Unpacking dwz (0.13+20210201-1) ...
Selecting previously unselected package libicu67:arm64.
Preparing to unpack .../25-libicu67_67.1-7_arm64.deb ...
Unpacking libicu67:arm64 (67.1-7) ...
Selecting previously unselected package libxml2:arm64.
Preparing to unpack .../26-libxml2_2.9.10+dfsg-6.7_arm64.deb ...
Unpacking libxml2:arm64 (2.9.10+dfsg-6.7) ...
Selecting previously unselected package gettext.
Preparing to unpack .../27-gettext_0.21-4_arm64.deb ...
Unpacking gettext (0.21-4) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../28-intltool-debian_0.35.0+20060710.5_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.5) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../29-po-debconf_1.0.21+nmu1_all.deb ...
Unpacking po-debconf (1.0.21+nmu1) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../30-debhelper_13.3.4_all.deb ...
Unpacking debhelper (13.3.4) ...
Selecting previously unselected package libax25.
Preparing to unpack .../31-libax25_0.0.12-rc5+git20190411+b17ff36-3_arm64.deb ...
Unpacking libax25 (0.0.12-rc5+git20190411+b17ff36-3) ...
Selecting previously unselected package libax25-dev.
Preparing to unpack .../32-libax25-dev_0.0.12-rc5+git20190411+b17ff36-3_arm64.deb ...
Unpacking libax25-dev (0.0.12-rc5+git20190411+b17ff36-3) ...
Setting up libpipeline1:arm64 (1.5.3-1) ...
Setting up bsdextrautils (2.36.1-8) ...
update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode
Setting up libicu67:arm64 (67.1-7) ...
Setting up libmagic-mgc (1:5.39-3) ...
Setting up libarchive-zip-perl (1.68-1) ...
Setting up libdebhelper-perl (13.3.4) ...
Setting up libmagic1:arm64 (1:5.39-3) ...
Setting up gettext-base (0.21-4) ...
Setting up file (1:5.39-3) ...
Setting up autotools-dev (20180224.1+nmu1) ...
Setting up libax25 (0.0.12-rc5+git20190411+b17ff36-3) ...
Setting up libsigsegv2:arm64 (2.13-1) ...
Setting up autopoint (0.21-4) ...
Setting up sensible-utils (0.0.14) ...
Setting up libuchardet0:arm64 (0.0.7-1) ...
Setting up libsub-override-perl (0.09-2) ...
Setting up libelf1:arm64 (0.183-1) ...
Setting up libxml2:arm64 (2.9.10+dfsg-6.7) ...
Setting up libfile-stripnondeterminism-perl (1.12.0-1) ...
Setting up gettext (0.21-4) ...
Setting up libtool (2.4.6-15) ...
Setting up libax25-dev (0.0.12-rc5+git20190411+b17ff36-3) ...
Setting up m4 (1.4.18-5) ...
Setting up intltool-debian (0.35.0+20060710.5) ...
Setting up autoconf (2.69-14) ...
Setting up dh-strip-nondeterminism (1.12.0-1) ...
Setting up dwz (0.13+20210201-1) ...
Setting up groff-base (1.22.4-6) ...
Setting up automake (1:1.16.3-2) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up po-debconf (1.0.21+nmu1) ...
Setting up man-db (2.9.4-2) ...
Not building database; man-db/auto-update is not 'true'.
Setting up dh-autoreconf (20) ...
Setting up debhelper (13.3.4) ...
Processing triggers for libc-bin (2.31-13) ...
Reading package lists...
Building dependency tree...
Reading state information...
Reading extended state information...
Initializing package states...
Writing extended state information...
Building tag database...
-> Finished parsing the build-deps
I: Building the package
I: Running cd /build/uronode-2.13/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../uronode_2.13-2_source.changes
dpkg-buildpackage: info: source package uronode
dpkg-buildpackage: info: source version 2.13-2
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Dave Hibberd <d@vehibberd.com>
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture arm64
debian/rules clean
dh clean
dh_clean
debian/rules binary
dh binary
dh_update_autotools_config
dh_autoreconf
dh_auto_configure
./configure --build=aarch64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/aarch64-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking
Cleaning the directory for a fresh configuration...
make[1]: *** No rule to make target 'distclean'. Stop.
Welcome to the configuration utility for URONode. This configure script
will very simply and easily guide you into installling URONode with as
very little trouble as possible. All you need to really do is simply
answer the following questions below properly. If you make a mistake
just break out of it (ctrl+c) and rerun ./configure. Let's get started!
you need gcc to build URONode: saw /usr/bin/gcc... GCC found! Congratulations!!
you need make to make URONode: saw /usr/bin/make... MAKE found!
Your machine architecture is: aarch64
Checking for the existence of the Zlib headers... not found.
Without Zlib Node will lack compression support
See INSTALL for more information.
Creating Makefile
Creating Makefile.include
Creating config.h
Creating dependancy files...
Configuration successful!!
about the authors...
URONode is a combined effort of years worth of work. Those who's code
is included in this flavor of a linux based node are:
Brian Rogers N1URO (current maintainer),
Marius Petrescu YO2LOJ (current team member),
Bob Tenty VE3TOK (current team member),
Stefano Noferi IZ5AWZ (AWZNode)
Tomi Manninen OH2BNS, Alan Cox GW4PTS, and Roy Van Zundert PE1RJA
Special thanks to: Morgan, sm6tky for his security report
and Barry K2MF for his input on some of my routines and supplying
some source code. If you did not use interactive mode, you must
run make manually.
debian/rules override_dh_auto_build
make[1]: Entering directory '/build/uronode-2.13'
cat CHANGES.* > changelog
dh_auto_build
make -j8
make[2]: Entering directory '/build/uronode-2.13'
gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c user.c
gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c util.c
gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c nodeusers.c
gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c node.c
gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c cmdparse.c
gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c config.c
gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c command.c
gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c jheard.c
command.c: In function 'do_status':
command.c:872:10: warning: implicit declaration of function 'meminfo' [-Wimplicit-function-declaration]
872 | ma = meminfo("memtotal");
| ^~~~~~~
command.c: In function 'nuser_list':
command.c:1021:25: warning: implicit declaration of function 'kill' [-Wimplicit-function-declaration]
1021 | if (u.pid == -1 || (kill(u.pid, 0) == -1 && errno == ESRCH))
| ^~~~
gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c axcalluser.c
gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c gateway.c
node.c: In function 'main':
node.c:342:2: warning: implicit declaration of function 'node_prompt' [-Wimplicit-function-declaration]
342 | node_prompt();
| ^~~~~~~~~~~
gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c extcmd.c
gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c procinfo.c
gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c router.c
extcmd.c: In function 'pipe_extcmd':
extcmd.c:87:5: warning: ignoring return value of 'setgid' declared with attribute 'warn_unused_result' [-Wunused-result]
87 | setgid(cmdp->gid);
| ^~~~~~~~~~~~~~~~~
extcmd.c:88:5: warning: ignoring return value of 'setuid' declared with attribute 'warn_unused_result' [-Wunused-result]
88 | setuid(cmdp->uid);
| ^~~~~~~~~~~~~~~~~
extcmd.c: In function 'norm_extcmd':
extcmd.c:40:5: warning: ignoring return value of 'setgid' declared with attribute 'warn_unused_result' [-Wunused-result]
40 | setgid(cmdp->gid);
| ^~~~~~~~~~~~~~~~~
extcmd.c:41:5: warning: ignoring return value of 'setuid' declared with attribute 'warn_unused_result' [-Wunused-result]
41 | setuid(cmdp->uid);
| ^~~~~~~~~~~~~~~~~
gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c system.c
gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c sysinfo.c
gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c ipc.c
gateway.c: In function 'connect_to.constprop':
gateway.c:40:21: warning: '-15' directive writing 3 bytes into a region of size between 1 and 10 [-Wformat-overflow=]
40 | sprintf(out, "%s-15", in);
| ^~~
In file included from /usr/include/stdio.h:867,
from gateway.c:1:
/usr/include/aarch64-linux-gnu/bits/stdio2.h:36:10: note: '__builtin___sprintf_chk' output between 4 and 13 bytes into a destination of size 10
36 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
37 | __bos (__s), __fmt, __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gateway.c:37:22: warning: '%d' directive writing between 1 and 11 bytes into a region of size between 0 and 9 [-Wformat-overflow=]
37 | sprintf(out, "%s-%d", in, 15 - atoi(cp + 1));
| ^~
gateway.c:37:18: note: directive argument in the range [-2147483632, 2147483647]
37 | sprintf(out, "%s-%d", in, 15 - atoi(cp + 1));
| ^~~~~~~
In file included from /usr/include/stdio.h:867,
from gateway.c:1:
/usr/include/aarch64-linux-gnu/bits/stdio2.h:36:10: note: '__builtin___sprintf_chk' output between 3 and 22 bytes into a destination of size 10
36 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
37 | __bos (__s), __fmt, __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
router.c: In function 'do_dest':
router.c:261:23: warning: '%d' directive writing between 1 and 5 bytes into a region of size between 0 and 4 [-Wformat-overflow=]
261 | sprintf(ssid, "%d-%d", p->ssida, p->sside);
| ^~
router.c:261:19: note: directive argument in the range [0, 65535]
261 | sprintf(ssid, "%d-%d", p->ssida, p->sside);
| ^~~~~~~
In file included from /usr/include/stdio.h:867,
from router.c:1:
/usr/include/aarch64-linux-gnu/bits/stdio2.h:36:10: note: '__builtin___sprintf_chk' output between 4 and 12 bytes into a destination of size 6
36 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
37 | __bos (__s), __fmt, __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
router.c:237:25: warning: '%d' directive writing between 1 and 5 bytes into a region of size between 0 and 4 [-Wformat-overflow=]
237 | sprintf(ssid, "%d-%d", p->ssida, p->sside);
| ^~
router.c:237:21: note: directive argument in the range [0, 65535]
237 | sprintf(ssid, "%d-%d", p->ssida, p->sside);
| ^~~~~~~
In file included from /usr/include/stdio.h:867,
from router.c:1:
/usr/include/aarch64-linux-gnu/bits/stdio2.h:36:10: note: '__builtin___sprintf_chk' output between 4 and 12 bytes into a destination of size 6
36 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
37 | __bos (__s), __fmt, __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
router.c:204:25: warning: '%d' directive writing between 1 and 5 bytes into a region of size between 0 and 4 [-Wformat-overflow=]
204 | sprintf(ssid, "%d-%d", p->ssida, p->sside);
| ^~
router.c:204:21: note: directive argument in the range [0, 65535]
204 | sprintf(ssid, "%d-%d", p->ssida, p->sside);
| ^~~~~~~
In file included from /usr/include/stdio.h:867,
from router.c:1:
/usr/include/aarch64-linux-gnu/bits/stdio2.h:36:10: note: '__builtin___sprintf_chk' output between 4 and 12 bytes into a destination of size 6
36 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
37 | __bos (__s), __fmt, __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ipc.c: In function 'usr2_handler':
ipc.c:41:7: warning: implicit declaration of function 'node_prompt' [-Wimplicit-function-declaration]
41 | node_prompt();
| ^~~~~~~~~~~
system.c: In function 'find_pty':
system.c:88:18: warning: too many arguments for format [-Wformat-extra-args]
88 | sprintf(master, "/dev/ptmx", O_RDWR);
| ^~~~~~~~~~~
system.c:91:15: warning: passing argument 1 of 'sprintf' from incompatible pointer type [-Wincompatible-pointer-types]
91 | sprintf(ptyname, "/dev/ptmx", 'p' + (num >> 4), num & 0xf);
| ^~~~~~~
| |
| char **
In file included from /usr/include/features.h:461,
from /usr/include/aarch64-linux-gnu/bits/libc-header-start.h:33,
from /usr/include/stdio.h:27,
from system.c:1:
/usr/include/aarch64-linux-gnu/bits/stdio2.h:34:1: note: expected 'char * restrict' but argument is of type 'char **'
34 | __NTH (sprintf (char *__restrict __s, const char *__restrict __fmt, ...))
| ^~~~~
system.c:91:24: warning: too many arguments for format [-Wformat-extra-args]
91 | sprintf(ptyname, "/dev/ptmx", 'p' + (num >> 4), num & 0xf);
| ^~~~~~~~~~~
gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c axdigi.c
system.c: In function 'login_open':
system.c:149:23: warning: passing argument 1 of 'find_pty' from incompatible pointer type [-Wincompatible-pointer-types]
149 | if ((ptyfd=find_pty(ptyname)) < 0) {
| ^~~~~~~
| |
| char *
system.c:78:21: note: expected 'char **' but argument is of type 'char *'
78 | int find_pty(char **ptyname)
| ~~~~~~~^~~~~~~
system.c: In function 'login_close':
system.c:110:5: warning: ignoring return value of 'chown' declared with attribute 'warn_unused_result' [-Wunused-result]
110 | chown(ptyname, 0, 0);
| ^~~~~~~~~~~~~~~~~~~~
system.c: In function 'login_open':
system.c:171:5: warning: ignoring return value of 'dup' declared with attribute 'warn_unused_result' [-Wunused-result]
171 | dup(0);
| ^~~~~~
system.c:172:5: warning: ignoring return value of 'dup' declared with attribute 'warn_unused_result' [-Wunused-result]
172 | dup(0);
| ^~~~~~
system.c:207:5: warning: ignoring return value of 'setgid' declared with attribute 'warn_unused_result' [-Wunused-result]
207 | setgid(pw->pw_gid);
| ^~~~~~~~~~~~~~~~~~
system.c:208:5: warning: ignoring return value of 'setuid' declared with attribute 'warn_unused_result' [-Wunused-result]
208 | setuid(pw->pw_uid);
| ^~~~~~~~~~~~~~~~~~
system.c:271:4: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result]
271 | write(ptyfd, buf, cnt);
| ^~~~~~~~~~~~~~~~~~~~~~
system.c: In function 'lastlog':
system.c:547:3: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result]
547 | write(last, (char *)&ll, sizeof(ll));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c calibrate.c
gcc -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -g -O2 -fdebug-prefix-map=/build/uronode-2.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wl,-z,now -c flexd.c
gcc -Wl,-z,relro -Wl,-z,now -o nodeusers user.o util.o nodeusers.o -lax25 -lax25io
gcc -Wl,-z,relro -Wl,-z,now -o calibrate calibrate.o -lax25 -lax25io
gcc -Wl,-z,relro -Wl,-z,now -o axdigi axdigi.o -lax25 -lax25io
flexd.c: In function 'download_dest':
flexd.c:146:5: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result]
146 | write(STDOUT_FILENO, buffer, strlen(buffer));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
flexd.c:155:5: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result]
155 | write(STDOUT_FILENO, buffer, strlen(buffer));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
flexd.c:170:5: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result]
170 | write(STDOUT_FILENO, buffer, strlen(buffer));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
flexd.c:183:5: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result]
183 | write(STDOUT_FILENO, buffer, strlen(buffer));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
flexd.c:190:5: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result]
190 | write(STDOUT_FILENO, buffer, strlen(buffer));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
flexd.c:211:5: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result]
211 | write(STDOUT_FILENO, buffer, strlen(buffer));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
flexd.c:240:2: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result]
240 | write(STDOUT_FILENO, buffer, strlen(buffer));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
flexd.c:292:2: warning: ignoring return value of 'write' declared with attribute 'warn_unused_result' [-Wunused-result]
292 | write(s, commands[cmd_send], 2);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gcc -Wl,-z,relro -Wl,-z,now -o flexd flexd.o procinfo.o -lax25 -lax25io
gcc -Wl,-z,relro -Wl,-z,now -o uronode user.o util.o node.o cmdparse.o config.o command.o jheard.o axcalluser.o gateway.o extcmd.o procinfo.o router.o system.o sysinfo.o ipc.o -lax25 -lax25io
make[2]: Leaving directory '/build/uronode-2.13'
make[1]: Leaving directory '/build/uronode-2.13'
dh_auto_test
create-stamp debian/debhelper-build-stamp
dh_prep
dh_auto_install
make -j8 install DESTDIR=/build/uronode-2.13/debian/uronode AM_UPDATE_INFO_DIR=no
make[1]: Entering directory '/build/uronode-2.13'
install -b -m 755 -D -d debian/uronode/usr/sbin
install -m 755 -D -d debian/uronode/usr/share/man/man1 debian/uronode/usr/share/man/man5 debian/uronode/usr/share/man/man8
install -b -m 755 -D -d debian/uronode/var/lib/ax25
install -m 755 -s -p uronode debian/uronode/usr/sbin
install -m 644 -p man/nodeusers.1 debian/uronode/usr/share/man/man1
install -b -m 755 -D -d debian/uronode/var/lib/ax25/node/help
install -m 644 -p man/uronode.conf.5 debian/uronode/usr/share/man/man5
install -b -m 644 -p etc/help/*.hlp debian/uronode/var/lib/ax25/node/help
install -m 644 -p man/uronode.perms.5 debian/uronode/usr/share/man/man5
install -m 644 -p man/flexd.conf.5 debian/uronode/usr/share/man/man5
install -m 755 -s -p nodeusers debian/uronode/usr/sbin
install -b -m 755 -D -d debian/uronode/etc/ax25
install -m 644 -p man/uronode.8 debian/uronode/usr/share/man/man8
install -b -m 600 -p etc/uronode.announce debian/uronode/etc/ax25
install -m 644 -p man/calibrate.8 debian/uronode/usr/share/man/man8
install -m 755 -s -p axdigi debian/uronode/usr/sbin
install -b -m 600 -p etc/uronode.conf debian/uronode/etc/ax25
install -m 644 -p man/axdigi.8 debian/uronode/usr/share/man/man8
install -b -m 600 -p etc/uronode.perms debian/uronode/etc/ax25
install -m 644 -p man/flexd.8 debian/uronode/usr/share/man/man8
install -b -m 600 -p etc/uronode.info debian/uronode/etc/ax25
install -m 755 -s -p calibrate debian/uronode/usr/sbin
install -b -m 600 -p etc/uronode.motd debian/uronode/etc/ax25
install -b -m 600 -p etc/uronode.users debian/uronode/etc/ax25
install -m 755 -s -p flexd debian/uronode/usr/sbin
install -b -m 600 -p etc/uronode.routes debian/uronode/etc/ax25
install -b -m 600 -p etc/flexd.conf debian/uronode/etc/ax25
install -b -m 755 -D -d debian/uronode/var/lib/ax25
install -b -m 755 -D -d debian/uronode/var/lib/ax25/node
install -b -m 644 -p etc/loggedin debian/uronode/var/lib/ax25/node
install -b -m 644 -p etc/lastlog debian/uronode/var/lib/ax25/node
install -b -m 755 -D -d debian/uronode/var/lib/ax25/flex
install -b -m 644 -p etc/gateways debian/uronode/var/lib/ax25/flex
make[1]: Leaving directory '/build/uronode-2.13'
dh_installdocs
dh_installchangelogs
dh_installman
dh_lintian
dh_perl
dh_link
dh_strip_nondeterminism
dh_compress
dh_fixperms
dh_missing
dh_dwz -a
dwz: debian/uronode/usr/sbin/axdigi: .debug_info section not present
dwz: debian/uronode/usr/sbin/calibrate: .debug_info section not present
dwz: debian/uronode/usr/sbin/flexd: .debug_info section not present
dwz: debian/uronode/usr/sbin/nodeusers: .debug_info section not present
dwz: debian/uronode/usr/sbin/uronode: .debug_info section not present
dwz: Too few files for multifile optimization
dh_dwz: warning: No dwz multifile created, but not explicitly requested either so ignoring it.
dh_dwz: warning: Common issues include no debug information at all (missing -g) and
dh_dwz: warning: compressed debug information (#931891).
dh_strip -a
dh_makeshlibs -a
dh_shlibdeps -a
dh_installdeb
dh_gencontrol
dh_md5sums
dh_builddeb
dpkg-deb: building package 'uronode' in '../uronode_2.13-2_arm64.deb'.
dpkg-genbuildinfo --build=binary
dpkg-genchanges --build=binary >../uronode_2.13-2_arm64.changes
dpkg-genchanges: info: binary-only upload (no source code included)
dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
dpkg-genchanges: info: not including original source code in upload
I: copying local configuration
I: unmounting dev/ptmx filesystem
I: unmounting dev/pts filesystem
I: unmounting dev/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
I: removing directory /srv/workspace/pbuilder/14176 and its subdirectories
I: Current time: Thu Aug 26 13:21:54 -12 2021
I: pbuilder-time-stamp: 1630027314
Fri Aug 27 01:21:55 UTC 2021 I: 1st build successful. Starting 2nd build on remote node codethink13-arm64.debian.net.
Fri Aug 27 01:21:55 UTC 2021 I: Preparing to do remote build '2' on codethink13-arm64.debian.net.
Fri Aug 27 01:22:37 UTC 2021 I: Deleting $TMPDIR on codethink13-arm64.debian.net.
Fri Aug 27 01:22:38 UTC 2021 I: uronode_2.13-2_arm64.changes:
Format: 1.8
Date: Tue, 02 Feb 2021 00:18:52 +0000
Source: uronode
Binary: uronode
Architecture: arm64
Version: 2.13-2
Distribution: unstable
Urgency: medium
Maintainer: Debian Hamradio Maintainers <debian-hams@lists.debian.org>
Changed-By: Dave Hibberd <d@vehibberd.com>
Description:
uronode - Node front end for AX.25, NET/ROM, Rose and TCP
Changes:
uronode (2.13-2) unstable; urgency=medium
.
* Fix runtime bug introduced by changes in folder-update patch for 2.12-1
Checksums-Sha1:
77b2bf9bd116adc69c44e412974bc3009dac0847 4640 uronode_2.13-2_arm64.buildinfo
62ff1b84dcf540d570938f938c2fbe44dfed04c4 121948 uronode_2.13-2_arm64.deb
Checksums-Sha256:
27696d67c42be336f69e9b0814227e30cecfae1b821eb05496bd786db4465ff8 4640 uronode_2.13-2_arm64.buildinfo
4dda5351e4fbe81e093a720bffb3debfd42dea869ed99d166d58cf6e82177d31 121948 uronode_2.13-2_arm64.deb
Files:
c0ebf40b47a2e43099e79571afc471af 4640 hamradio optional uronode_2.13-2_arm64.buildinfo
d9413da9e86107b954d0f20c54b8d139 121948 hamradio optional uronode_2.13-2_arm64.deb
Fri Aug 27 01:22:39 UTC 2021 I: diffoscope 177 will be used to compare the two builds:
# Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.V8vXEjv6rD/uronode_2.13-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.V8vXEjv6rD/uronode_2.13-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.V8vXEjv6rD/uronode_2.13-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.V8vXEjv6rD/b1/uronode_2.13-2_arm64.changes /srv/reproducible-results/rbuild-debian/tmp.V8vXEjv6rD/b2/uronode_2.13-2_arm64.changes
## command (total time: 0.000s)
0.000s 1 call cmp (internal)
## has_same_content_as (total time: 0.000s)
0.000s 1 call abc.DotChangesFile
## main (total time: 0.233s)
0.233s 2 calls outputs
0.000s 1 call cleanup
## recognizes (total time: 0.015s)
0.015s 10 calls diffoscope.comparators.binary.FilesystemFile
0.000s 8 calls abc.DotChangesFile
Fri Aug 27 01:22:40 UTC 2021 I: diffoscope 177 found no differences in the changes files, and a .buildinfo file also exists.
Fri Aug 27 01:22:40 UTC 2021 I: uronode from bullseye built successfully and reproducibly on arm64.
Fri Aug 27 01:22:41 UTC 2021 I: Submitting .buildinfo files to external archives:
Fri Aug 27 01:22:41 UTC 2021 I: Submitting 8.0K b1/uronode_2.13-2_arm64.buildinfo.asc
Fri Aug 27 01:22:42 UTC 2021 I: Submitting 8.0K b2/uronode_2.13-2_arm64.buildinfo.asc
Fri Aug 27 01:22:44 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit.
Fri Aug 27 01:22:44 UTC 2021 I: Done submitting .buildinfo files.
Fri Aug 27 01:22:44 UTC 2021 I: Removing signed uronode_2.13-2_arm64.buildinfo.asc files:
removed './b1/uronode_2.13-2_arm64.buildinfo.asc'
removed './b2/uronode_2.13-2_arm64.buildinfo.asc'