Fri Jul 23 20:01:01 UTC 2021 I: starting to build wiki2beamer/bullseye/arm64 on jenkins on '2021-07-23 20:00'
Fri Jul 23 20:01:01 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_21/33349/console.log
Fri Jul 23 20:01:01 UTC 2021 I: Downloading source for bullseye/wiki2beamer=0.10.0-4
--2021-07-23 20:01:01-- http://cdn-fastly.deb.debian.org/debian/pool/main/w/wiki2beamer/wiki2beamer_0.10.0-4.dsc
Connecting to 78.137.99.97:3128... connected.
Proxy request sent, awaiting response... 200 OK
Length: 1894 (1.8K)
Saving to: ‘wiki2beamer_0.10.0-4.dsc’
0K . 100% 321M=0s
2021-07-23 20:01:01 (321 MB/s) - ‘wiki2beamer_0.10.0-4.dsc’ saved [1894/1894]
Fri Jul 23 20:01:01 UTC 2021 I: wiki2beamer_0.10.0-4.dsc
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 3.0 (quilt)
Source: wiki2beamer
Binary: wiki2beamer
Architecture: all
Version: 0.10.0-4
Maintainer: Francisco M Neto <fmneto@fmneto.com>
Homepage: https://wiki2beamer.github.io/
Standards-Version: 4.5.0
Vcs-Browser: https://salsa.debian.org/debian/wiki2beamer
Vcs-Git: https://salsa.debian.org/debian/wiki2beamer.git
Build-Depends: debhelper-compat (= 13), dh-sequence-python3, asciidoctor
Package-List:
wiki2beamer deb text optional arch=all
Checksums-Sha1:
02e3923575b0fe88ba5d9f2c2bb84eb75a7a28d2 164911 wiki2beamer_0.10.0.orig.tar.gz
057bd45e84eb2c87856c5d88bb369d17b7156762 3372 wiki2beamer_0.10.0-4.debian.tar.xz
Checksums-Sha256:
e9662674cbf6b859bc1847e0dfa9cc89b1c2e1d1e0f727285de9a374875cb6a7 164911 wiki2beamer_0.10.0.orig.tar.gz
dff466fee06ab778aa57a54de8f984b42082fd0425ef4815a5fa039f6c266bd6 3372 wiki2beamer_0.10.0-4.debian.tar.xz
Files:
04bbf102ef80ccd6bfd26e2833070693 164911 wiki2beamer_0.10.0.orig.tar.gz
085f1eb631908908d1871a38dd5efc30 3372 wiki2beamer_0.10.0-4.debian.tar.xz
-----BEGIN PGP SIGNATURE-----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=HLFz
-----END PGP SIGNATURE-----
Fri Jul 23 20:01:01 UTC 2021 I: Checking whether the package is not for us
Fri Jul 23 20:01:01 UTC 2021 I: Starting 1st build on remote node codethink14-arm64.debian.net.
Fri Jul 23 20:01:01 UTC 2021 I: Preparing to do remote build '1' on codethink14-arm64.debian.net.
Fri Jul 23 20:01:57 UTC 2021 I: Deleting $TMPDIR on codethink14-arm64.debian.net.
I: pbuilder: network access will be disabled during build
I: Current time: Fri Jul 23 08:01:06 -12 2021
I: pbuilder-time-stamp: 1627070466
I: Building the build Environment
I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz]
I: copying local configuration
I: mounting /proc filesystem
I: mounting /sys filesystem
I: creating /{dev,run}/shm
I: mounting /dev/pts filesystem
I: redirecting /dev/ptmx to /dev/pts/ptmx
I: policy-rc.d already exists
I: Copying source file
I: copying [wiki2beamer_0.10.0-4.dsc]
I: copying [./wiki2beamer_0.10.0.orig.tar.gz]
I: copying [./wiki2beamer_0.10.0-4.debian.tar.xz]
I: Extracting source
gpgv: unknown type of key resource 'trustedkeys.kbx'
gpgv: keyblock resource '/tmp/dpkg-verify-sig.SkwD_yld/trustedkeys.kbx': General error
gpgv: Signature made Sat Sep 19 11:20:44 2020 -12
gpgv: using RSA key 7E7729476D87D6F11D91ACCBC293E7B461825ACE
gpgv: Can't check signature: No public key
dpkg-source: warning: failed to verify signature on ./wiki2beamer_0.10.0-4.dsc
dpkg-source: info: extracting wiki2beamer in wiki2beamer-0.10.0
dpkg-source: info: unpacking wiki2beamer_0.10.0.orig.tar.gz
dpkg-source: info: unpacking wiki2beamer_0.10.0-4.debian.tar.xz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: applying 010_fix-doc-makefile.patch
I: Not using root during the build.
I: Installing the build-deps
I: user script /srv/workspace/pbuilder/19325/tmp/hooks/D02_print_environment starting
I: set
BUILDDIR='/build'
BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other'
BUILDUSERNAME='pbuilder1'
BUILD_ARCH='arm64'
DEBIAN_FRONTEND='noninteractive'
DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=8'
DISTRIBUTION=''
HOME='/var/lib/jenkins'
HOST_ARCH='arm64'
IFS='
'
LANG='C'
LANGUAGE='en_US:en'
LC_ALL='C'
MAIL='/var/mail/root'
OPTIND='1'
PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games'
PBCURRENTCOMMANDLINEOPERATION='build'
PBUILDER_OPERATION='build'
PBUILDER_PKGDATADIR='/usr/share/pbuilder'
PBUILDER_PKGLIBDIR='/usr/lib/pbuilder'
PBUILDER_SYSCONFDIR='/etc'
PPID='19325'
PS1='# '
PS2='> '
PS4='+ '
PWD='/'
SHELL='/bin/bash'
SHLVL='2'
SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.ELRl5NpM1V/pbuilderrc_aeKx --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.ELRl5NpM1V/b1 --logfile b1/build.log wiki2beamer_0.10.0-4.dsc'
SUDO_GID='117'
SUDO_UID='110'
SUDO_USER='jenkins'
TERM='unknown'
TZ='/usr/share/zoneinfo/Etc/GMT+12'
USER='root'
USERNAME='root'
_='/usr/bin/systemd-run'
http_proxy='http://192.168.101.16:3128'
I: uname -a
Linux codethink14-arm64 4.15.0-151-generic #157-Ubuntu SMP Fri Jul 9 21:03:48 UTC 2021 aarch64 GNU/Linux
I: ls -l /bin
total 5252
-rwxr-xr-x 1 root root 1282512 Jun 21 14:26 bash
-rwxr-xr-x 3 root root 34808 Jul 20 2020 bunzip2
-rwxr-xr-x 3 root root 34808 Jul 20 2020 bzcat
lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff
-rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff
lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep
-rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe
lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep
-rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep
-rwxr-xr-x 3 root root 34808 Jul 20 2020 bzip2
-rwxr-xr-x 1 root root 14264 Jul 20 2020 bzip2recover
lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore
-rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore
-rwxr-xr-x 1 root root 39832 Sep 22 2020 cat
-rwxr-xr-x 1 root root 64512 Sep 22 2020 chgrp
-rwxr-xr-x 1 root root 60368 Sep 22 2020 chmod
-rwxr-xr-x 1 root root 64528 Sep 22 2020 chown
-rwxr-xr-x 1 root root 138896 Sep 22 2020 cp
-rwxr-xr-x 1 root root 129544 Dec 10 2020 dash
-rwxr-xr-x 1 root root 101384 Sep 22 2020 date
-rwxr-xr-x 1 root root 80984 Sep 22 2020 dd
-rwxr-xr-x 1 root root 89824 Sep 22 2020 df
-rwxr-xr-x 1 root root 143088 Sep 22 2020 dir
-rwxr-xr-x 1 root root 76152 Feb 7 02:38 dmesg
lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname
lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname
-rwxr-xr-x 1 root root 35632 Sep 22 2020 echo
-rwxr-xr-x 1 root root 28 Nov 9 2020 egrep
-rwxr-xr-x 1 root root 31512 Sep 22 2020 false
-rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep
-rwxr-xr-x 1 root root 64856 Feb 7 02:38 findmnt
-rwsr-xr-x 1 root root 34824 Feb 26 04:12 fusermount
-rwxr-xr-x 1 root root 178400 Nov 9 2020 grep
-rwxr-xr-x 2 root root 2346 Mar 2 11:30 gunzip
-rwxr-xr-x 1 root root 6376 Mar 2 11:30 gzexe
-rwxr-xr-x 1 root root 93744 Mar 2 11:30 gzip
-rwxr-xr-x 1 root root 18440 Nov 6 2019 hostname
-rwxr-xr-x 1 root root 68720 Sep 22 2020 ln
-rwxr-xr-x 1 root root 52720 Feb 7 2020 login
-rwxr-xr-x 1 root root 143088 Sep 22 2020 ls
-rwxr-xr-x 1 root root 161960 Feb 7 02:38 lsblk
-rwxr-xr-x 1 root root 85200 Sep 22 2020 mkdir
-rwxr-xr-x 1 root root 68744 Sep 22 2020 mknod
-rwxr-xr-x 1 root root 43976 Sep 22 2020 mktemp
-rwxr-xr-x 1 root root 51368 Feb 7 02:38 more
-rwsr-xr-x 1 root root 51360 Feb 7 02:38 mount
-rwxr-xr-x 1 root root 14496 Feb 7 02:38 mountpoint
-rwxr-xr-x 1 root root 134808 Sep 22 2020 mv
lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname
lrwxrwxrwx 1 root root 14 Apr 18 03:38 pidof -> /sbin/killall5
-rwxr-xr-x 1 root root 35720 Sep 22 2020 pwd
lrwxrwxrwx 1 root root 4 Jun 21 14:26 rbash -> bash
-rwxr-xr-x 1 root root 43872 Sep 22 2020 readlink
-rwxr-xr-x 1 root root 68592 Sep 22 2020 rm
-rwxr-xr-x 1 root root 43880 Sep 22 2020 rmdir
-rwxr-xr-x 1 root root 19208 Sep 27 2020 run-parts
-rwxr-xr-x 1 root root 114016 Dec 22 2018 sed
lrwxrwxrwx 1 root root 4 Jul 21 21:25 sh -> dash
-rwxr-xr-x 1 root root 35656 Sep 22 2020 sleep
-rwxr-xr-x 1 root root 72640 Sep 22 2020 stty
-rwsr-xr-x 1 root root 67776 Feb 7 02:38 su
-rwxr-xr-x 1 root root 35672 Sep 22 2020 sync
-rwxr-xr-x 1 root root 535768 Feb 16 21:55 tar
-rwxr-xr-x 1 root root 10568 Sep 27 2020 tempfile
-rwxr-xr-x 1 root root 89120 Sep 22 2020 touch
-rwxr-xr-x 1 root root 31512 Sep 22 2020 true
-rwxr-xr-x 1 root root 14264 Feb 26 04:12 ulockmgr_server
-rwsr-xr-x 1 root root 30880 Feb 7 02:38 umount
-rwxr-xr-x 1 root root 35640 Sep 22 2020 uname
-rwxr-xr-x 2 root root 2346 Mar 2 11:30 uncompress
-rwxr-xr-x 1 root root 143088 Sep 22 2020 vdir
-rwxr-xr-x 1 root root 59584 Feb 7 02:38 wdctl
lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname
-rwxr-xr-x 1 root root 1984 Mar 2 11:30 zcat
-rwxr-xr-x 1 root root 1678 Mar 2 11:30 zcmp
-rwxr-xr-x 1 root root 5880 Mar 2 11:30 zdiff
-rwxr-xr-x 1 root root 29 Mar 2 11:30 zegrep
-rwxr-xr-x 1 root root 29 Mar 2 11:30 zfgrep
-rwxr-xr-x 1 root root 2081 Mar 2 11:30 zforce
-rwxr-xr-x 1 root root 7585 Mar 2 11:30 zgrep
-rwxr-xr-x 1 root root 2206 Mar 2 11:30 zless
-rwxr-xr-x 1 root root 1842 Mar 2 11:30 zmore
-rwxr-xr-x 1 root root 4553 Mar 2 11:30 znew
I: user script /srv/workspace/pbuilder/19325/tmp/hooks/D02_print_environment finished
-> Attempting to satisfy build-dependencies
-> Creating pbuilder-satisfydepends-dummy package
Package: pbuilder-satisfydepends-dummy
Version: 0.invalid.0
Architecture: arm64
Maintainer: Debian Pbuilder Team <pbuilder-maint@lists.alioth.debian.org>
Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder
This package was created automatically by pbuilder to satisfy the
build-dependencies of the package being currently built.
Depends: debhelper-compat (= 13), dh-sequence-python3, asciidoctor
dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'.
Selecting previously unselected package pbuilder-satisfydepends-dummy.
(Reading database ... 19646 files and directories currently installed.)
Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ...
Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ...
dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested:
pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however:
Package debhelper-compat is not installed.
pbuilder-satisfydepends-dummy depends on dh-sequence-python3; however:
Package dh-sequence-python3 is not installed.
pbuilder-satisfydepends-dummy depends on asciidoctor; however:
Package asciidoctor is not installed.
Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ...
Reading package lists...
Building dependency tree...
Reading state information...
Initializing package states...
Writing extended state information...
Building tag database...
pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0)
pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0)
The following NEW packages will be installed:
asciidoctor{a} autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} ca-certificates{a} debhelper{a} dh-autoreconf{a} dh-python{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbsd0{a} libdebhelper-perl{a} libedit2{a} libelf1{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libicu67{a} libmagic-mgc{a} libmagic1{a} libmd0{a} libmpdec3{a} libpipeline1{a} libpython3-stdlib{a} libpython3.9-minimal{a} libpython3.9-stdlib{a} libreadline8{a} libruby2.7{a} libsigsegv2{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} libyaml-0-2{a} m4{a} man-db{a} media-types{a} openssl{a} po-debconf{a} python3{a} python3-distutils{a} python3-lib2to3{a} python3-minimal{a} python3.9{a} python3.9-minimal{a} rake{a} readline-common{a} ruby{a} ruby-asciidoctor{a} ruby-minitest{a} ruby-net-telnet{a} ruby-power-assert{a} ruby-rubygems{a} ruby-test-unit{a} ruby-xmlrpc{a} ruby2.7{a} rubygems-integration{a} sensible-utils{a}
The following packages are RECOMMENDED but will NOT be installed:
curl fonts-lato libarchive-cpio-perl libjs-jquery libltdl-dev libmail-sendmail-perl lynx wget zip
0 packages upgraded, 65 newly installed, 0 to remove and 0 not upgraded.
Need to get 30.5 MB of archives. After unpacking 113 MB will be used.
Writing extended state information...
Get: 1 http://deb.debian.org/debian bullseye/main arm64 bsdextrautils arm64 2.36.1-7 [141 kB]
Get: 2 http://deb.debian.org/debian bullseye/main arm64 libuchardet0 arm64 0.0.7-1 [67.9 kB]
Get: 3 http://deb.debian.org/debian bullseye/main arm64 groff-base arm64 1.22.4-6 [883 kB]
Get: 4 http://deb.debian.org/debian bullseye/main arm64 libpipeline1 arm64 1.5.3-1 [33.0 kB]
Get: 5 http://deb.debian.org/debian bullseye/main arm64 man-db arm64 2.9.4-2 [1336 kB]
Get: 6 http://deb.debian.org/debian bullseye/main arm64 libpython3.9-minimal arm64 3.9.2-1 [797 kB]
Get: 7 http://deb.debian.org/debian bullseye/main arm64 libexpat1 arm64 2.2.10-2 [83.1 kB]
Get: 8 http://deb.debian.org/debian bullseye/main arm64 python3.9-minimal arm64 3.9.2-1 [1884 kB]
Get: 9 http://deb.debian.org/debian bullseye/main arm64 python3-minimal arm64 3.9.2-3 [38.2 kB]
Get: 10 http://deb.debian.org/debian bullseye/main arm64 media-types all 4.0.0 [30.3 kB]
Get: 11 http://deb.debian.org/debian bullseye/main arm64 libmpdec3 arm64 2.5.1-1 [84.4 kB]
Get: 12 http://deb.debian.org/debian bullseye/main arm64 readline-common all 8.1-1 [73.7 kB]
Get: 13 http://deb.debian.org/debian bullseye/main arm64 libreadline8 arm64 8.1-1 [160 kB]
Get: 14 http://deb.debian.org/debian bullseye/main arm64 libpython3.9-stdlib arm64 3.9.2-1 [1658 kB]
Get: 15 http://deb.debian.org/debian bullseye/main arm64 python3.9 arm64 3.9.2-1 [466 kB]
Get: 16 http://deb.debian.org/debian bullseye/main arm64 libpython3-stdlib arm64 3.9.2-3 [21.4 kB]
Get: 17 http://deb.debian.org/debian bullseye/main arm64 python3 arm64 3.9.2-3 [37.9 kB]
Get: 18 http://deb.debian.org/debian bullseye/main arm64 sensible-utils all 0.0.14 [14.8 kB]
Get: 19 http://deb.debian.org/debian bullseye/main arm64 openssl arm64 1.1.1k-1 [829 kB]
Get: 20 http://deb.debian.org/debian bullseye/main arm64 ca-certificates all 20210119 [158 kB]
Get: 21 http://deb.debian.org/debian bullseye/main arm64 libmagic-mgc arm64 1:5.39-3 [273 kB]
Get: 22 http://deb.debian.org/debian bullseye/main arm64 libmagic1 arm64 1:5.39-3 [121 kB]
Get: 23 http://deb.debian.org/debian bullseye/main arm64 file arm64 1:5.39-3 [69.1 kB]
Get: 24 http://deb.debian.org/debian bullseye/main arm64 gettext-base arm64 0.21-4 [173 kB]
Get: 25 http://deb.debian.org/debian bullseye/main arm64 rubygems-integration all 1.18 [6704 B]
Get: 26 http://deb.debian.org/debian bullseye/main arm64 rake all 13.0.3-1 [84.7 kB]
Get: 27 http://deb.debian.org/debian bullseye/main arm64 ruby-minitest all 5.13.0-1 [57.3 kB]
Get: 28 http://deb.debian.org/debian bullseye/main arm64 ruby-net-telnet all 0.1.1-2 [12.5 kB]
Get: 29 http://deb.debian.org/debian bullseye/main arm64 ruby-power-assert all 1.1.7-2 [11.5 kB]
Get: 30 http://deb.debian.org/debian bullseye/main arm64 ruby-test-unit all 3.3.9-1 [86.1 kB]
Get: 31 http://deb.debian.org/debian bullseye/main arm64 ruby-xmlrpc all 0.3.0-2 [23.7 kB]
Get: 32 http://deb.debian.org/debian bullseye/main arm64 libmd0 arm64 1.0.3-3 [27.9 kB]
Get: 33 http://deb.debian.org/debian bullseye/main arm64 libbsd0 arm64 0.11.3-1 [106 kB]
Get: 34 http://deb.debian.org/debian bullseye/main arm64 libedit2 arm64 3.1-20191231-2+b1 [92.1 kB]
Get: 35 http://deb.debian.org/debian bullseye/main arm64 libyaml-0-2 arm64 0.2.2-1 [45.1 kB]
Get: 36 http://deb.debian.org/debian bullseye/main arm64 libruby2.7 arm64 2.7.4-1 [4031 kB]
Get: 37 http://deb.debian.org/debian bullseye/main arm64 ruby2.7 arm64 2.7.4-1 [747 kB]
Get: 38 http://deb.debian.org/debian bullseye/main arm64 ruby-rubygems all 3.2.5-2 [281 kB]
Get: 39 http://deb.debian.org/debian bullseye/main arm64 ruby arm64 1:2.7+2 [11.7 kB]
Get: 40 http://deb.debian.org/debian bullseye/main arm64 ruby-asciidoctor all 2.0.12-2 [206 kB]
Get: 41 http://deb.debian.org/debian bullseye/main arm64 asciidoctor all 2.0.12-2 [83.9 kB]
Get: 42 http://deb.debian.org/debian bullseye/main arm64 libsigsegv2 arm64 2.13-1 [34.7 kB]
Get: 43 http://deb.debian.org/debian bullseye/main arm64 m4 arm64 1.4.18-5 [199 kB]
Get: 44 http://deb.debian.org/debian bullseye/main arm64 autoconf all 2.69-14 [313 kB]
Get: 45 http://deb.debian.org/debian bullseye/main arm64 autotools-dev all 20180224.1+nmu1 [77.1 kB]
Get: 46 http://deb.debian.org/debian bullseye/main arm64 automake all 1:1.16.3-2 [814 kB]
Get: 47 http://deb.debian.org/debian bullseye/main arm64 autopoint all 0.21-4 [510 kB]
Get: 48 http://deb.debian.org/debian bullseye/main arm64 libdebhelper-perl all 13.3.4 [189 kB]
Get: 49 http://deb.debian.org/debian bullseye/main arm64 libtool all 2.4.6-15 [513 kB]
Get: 50 http://deb.debian.org/debian bullseye/main arm64 dh-autoreconf all 20 [17.1 kB]
Get: 51 http://deb.debian.org/debian bullseye/main arm64 libarchive-zip-perl all 1.68-1 [104 kB]
Get: 52 http://deb.debian.org/debian bullseye/main arm64 libsub-override-perl all 0.09-2 [10.2 kB]
Get: 53 http://deb.debian.org/debian bullseye/main arm64 libfile-stripnondeterminism-perl all 1.12.0-1 [26.3 kB]
Get: 54 http://deb.debian.org/debian bullseye/main arm64 dh-strip-nondeterminism all 1.12.0-1 [15.4 kB]
Get: 55 http://deb.debian.org/debian bullseye/main arm64 libelf1 arm64 0.183-1 [164 kB]
Get: 56 http://deb.debian.org/debian bullseye/main arm64 dwz arm64 0.13+20210201-1 [155 kB]
Get: 57 http://deb.debian.org/debian bullseye/main arm64 libicu67 arm64 67.1-7 [8467 kB]
Get: 58 http://deb.debian.org/debian bullseye/main arm64 libxml2 arm64 2.9.10+dfsg-6.7 [629 kB]
Get: 59 http://deb.debian.org/debian bullseye/main arm64 gettext arm64 0.21-4 [1261 kB]
Get: 60 http://deb.debian.org/debian bullseye/main arm64 intltool-debian all 0.35.0+20060710.5 [26.8 kB]
Get: 61 http://deb.debian.org/debian bullseye/main arm64 po-debconf all 1.0.21+nmu1 [248 kB]
Get: 62 http://deb.debian.org/debian bullseye/main arm64 debhelper all 13.3.4 [1049 kB]
Get: 63 http://deb.debian.org/debian bullseye/main arm64 python3-lib2to3 all 3.9.2-1 [77.8 kB]
Get: 64 http://deb.debian.org/debian bullseye/main arm64 python3-distutils all 3.9.2-1 [143 kB]
Get: 65 http://deb.debian.org/debian bullseye/main arm64 dh-python all 4.20201102+nmu1 [99.4 kB]
Fetched 30.5 MB in 1s (42.8 MB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package bsdextrautils.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 19646 files and directories currently installed.)
Preparing to unpack .../0-bsdextrautils_2.36.1-7_arm64.deb ...
Unpacking bsdextrautils (2.36.1-7) ...
Selecting previously unselected package libuchardet0:arm64.
Preparing to unpack .../1-libuchardet0_0.0.7-1_arm64.deb ...
Unpacking libuchardet0:arm64 (0.0.7-1) ...
Selecting previously unselected package groff-base.
Preparing to unpack .../2-groff-base_1.22.4-6_arm64.deb ...
Unpacking groff-base (1.22.4-6) ...
Selecting previously unselected package libpipeline1:arm64.
Preparing to unpack .../3-libpipeline1_1.5.3-1_arm64.deb ...
Unpacking libpipeline1:arm64 (1.5.3-1) ...
Selecting previously unselected package man-db.
Preparing to unpack .../4-man-db_2.9.4-2_arm64.deb ...
Unpacking man-db (2.9.4-2) ...
Selecting previously unselected package libpython3.9-minimal:arm64.
Preparing to unpack .../5-libpython3.9-minimal_3.9.2-1_arm64.deb ...
Unpacking libpython3.9-minimal:arm64 (3.9.2-1) ...
Selecting previously unselected package libexpat1:arm64.
Preparing to unpack .../6-libexpat1_2.2.10-2_arm64.deb ...
Unpacking libexpat1:arm64 (2.2.10-2) ...
Selecting previously unselected package python3.9-minimal.
Preparing to unpack .../7-python3.9-minimal_3.9.2-1_arm64.deb ...
Unpacking python3.9-minimal (3.9.2-1) ...
Setting up libpython3.9-minimal:arm64 (3.9.2-1) ...
Setting up libexpat1:arm64 (2.2.10-2) ...
Setting up python3.9-minimal (3.9.2-1) ...
Selecting previously unselected package python3-minimal.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20513 files and directories currently installed.)
Preparing to unpack .../0-python3-minimal_3.9.2-3_arm64.deb ...
Unpacking python3-minimal (3.9.2-3) ...
Selecting previously unselected package media-types.
Preparing to unpack .../1-media-types_4.0.0_all.deb ...
Unpacking media-types (4.0.0) ...
Selecting previously unselected package libmpdec3:arm64.
Preparing to unpack .../2-libmpdec3_2.5.1-1_arm64.deb ...
Unpacking libmpdec3:arm64 (2.5.1-1) ...
Selecting previously unselected package readline-common.
Preparing to unpack .../3-readline-common_8.1-1_all.deb ...
Unpacking readline-common (8.1-1) ...
Selecting previously unselected package libreadline8:arm64.
Preparing to unpack .../4-libreadline8_8.1-1_arm64.deb ...
Unpacking libreadline8:arm64 (8.1-1) ...
Selecting previously unselected package libpython3.9-stdlib:arm64.
Preparing to unpack .../5-libpython3.9-stdlib_3.9.2-1_arm64.deb ...
Unpacking libpython3.9-stdlib:arm64 (3.9.2-1) ...
Selecting previously unselected package python3.9.
Preparing to unpack .../6-python3.9_3.9.2-1_arm64.deb ...
Unpacking python3.9 (3.9.2-1) ...
Selecting previously unselected package libpython3-stdlib:arm64.
Preparing to unpack .../7-libpython3-stdlib_3.9.2-3_arm64.deb ...
Unpacking libpython3-stdlib:arm64 (3.9.2-3) ...
Setting up python3-minimal (3.9.2-3) ...
Selecting previously unselected package python3.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20934 files and directories currently installed.)
Preparing to unpack .../00-python3_3.9.2-3_arm64.deb ...
Unpacking python3 (3.9.2-3) ...
Selecting previously unselected package sensible-utils.
Preparing to unpack .../01-sensible-utils_0.0.14_all.deb ...
Unpacking sensible-utils (0.0.14) ...
Selecting previously unselected package openssl.
Preparing to unpack .../02-openssl_1.1.1k-1_arm64.deb ...
Unpacking openssl (1.1.1k-1) ...
Selecting previously unselected package ca-certificates.
Preparing to unpack .../03-ca-certificates_20210119_all.deb ...
Unpacking ca-certificates (20210119) ...
Selecting previously unselected package libmagic-mgc.
Preparing to unpack .../04-libmagic-mgc_1%3a5.39-3_arm64.deb ...
Unpacking libmagic-mgc (1:5.39-3) ...
Selecting previously unselected package libmagic1:arm64.
Preparing to unpack .../05-libmagic1_1%3a5.39-3_arm64.deb ...
Unpacking libmagic1:arm64 (1:5.39-3) ...
Selecting previously unselected package file.
Preparing to unpack .../06-file_1%3a5.39-3_arm64.deb ...
Unpacking file (1:5.39-3) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../07-gettext-base_0.21-4_arm64.deb ...
Unpacking gettext-base (0.21-4) ...
Selecting previously unselected package rubygems-integration.
Preparing to unpack .../08-rubygems-integration_1.18_all.deb ...
Unpacking rubygems-integration (1.18) ...
Selecting previously unselected package rake.
Preparing to unpack .../09-rake_13.0.3-1_all.deb ...
Unpacking rake (13.0.3-1) ...
Selecting previously unselected package ruby-minitest.
Preparing to unpack .../10-ruby-minitest_5.13.0-1_all.deb ...
Unpacking ruby-minitest (5.13.0-1) ...
Selecting previously unselected package ruby-net-telnet.
Preparing to unpack .../11-ruby-net-telnet_0.1.1-2_all.deb ...
Unpacking ruby-net-telnet (0.1.1-2) ...
Selecting previously unselected package ruby-power-assert.
Preparing to unpack .../12-ruby-power-assert_1.1.7-2_all.deb ...
Unpacking ruby-power-assert (1.1.7-2) ...
Selecting previously unselected package ruby-test-unit.
Preparing to unpack .../13-ruby-test-unit_3.3.9-1_all.deb ...
Unpacking ruby-test-unit (3.3.9-1) ...
Selecting previously unselected package ruby-xmlrpc.
Preparing to unpack .../14-ruby-xmlrpc_0.3.0-2_all.deb ...
Unpacking ruby-xmlrpc (0.3.0-2) ...
Selecting previously unselected package libmd0:arm64.
Preparing to unpack .../15-libmd0_1.0.3-3_arm64.deb ...
Unpacking libmd0:arm64 (1.0.3-3) ...
Selecting previously unselected package libbsd0:arm64.
Preparing to unpack .../16-libbsd0_0.11.3-1_arm64.deb ...
Unpacking libbsd0:arm64 (0.11.3-1) ...
Selecting previously unselected package libedit2:arm64.
Preparing to unpack .../17-libedit2_3.1-20191231-2+b1_arm64.deb ...
Unpacking libedit2:arm64 (3.1-20191231-2+b1) ...
Selecting previously unselected package libyaml-0-2:arm64.
Preparing to unpack .../18-libyaml-0-2_0.2.2-1_arm64.deb ...
Unpacking libyaml-0-2:arm64 (0.2.2-1) ...
Selecting previously unselected package libruby2.7:arm64.
Preparing to unpack .../19-libruby2.7_2.7.4-1_arm64.deb ...
Unpacking libruby2.7:arm64 (2.7.4-1) ...
Selecting previously unselected package ruby2.7.
Preparing to unpack .../20-ruby2.7_2.7.4-1_arm64.deb ...
Unpacking ruby2.7 (2.7.4-1) ...
Selecting previously unselected package ruby-rubygems.
Preparing to unpack .../21-ruby-rubygems_3.2.5-2_all.deb ...
Unpacking ruby-rubygems (3.2.5-2) ...
Selecting previously unselected package ruby.
Preparing to unpack .../22-ruby_1%3a2.7+2_arm64.deb ...
Unpacking ruby (1:2.7+2) ...
Selecting previously unselected package ruby-asciidoctor.
Preparing to unpack .../23-ruby-asciidoctor_2.0.12-2_all.deb ...
Unpacking ruby-asciidoctor (2.0.12-2) ...
Selecting previously unselected package asciidoctor.
Preparing to unpack .../24-asciidoctor_2.0.12-2_all.deb ...
Unpacking asciidoctor (2.0.12-2) ...
Selecting previously unselected package libsigsegv2:arm64.
Preparing to unpack .../25-libsigsegv2_2.13-1_arm64.deb ...
Unpacking libsigsegv2:arm64 (2.13-1) ...
Selecting previously unselected package m4.
Preparing to unpack .../26-m4_1.4.18-5_arm64.deb ...
Unpacking m4 (1.4.18-5) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../27-autoconf_2.69-14_all.deb ...
Unpacking autoconf (2.69-14) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../28-autotools-dev_20180224.1+nmu1_all.deb ...
Unpacking autotools-dev (20180224.1+nmu1) ...
Selecting previously unselected package automake.
Preparing to unpack .../29-automake_1%3a1.16.3-2_all.deb ...
Unpacking automake (1:1.16.3-2) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../30-autopoint_0.21-4_all.deb ...
Unpacking autopoint (0.21-4) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../31-libdebhelper-perl_13.3.4_all.deb ...
Unpacking libdebhelper-perl (13.3.4) ...
Selecting previously unselected package libtool.
Preparing to unpack .../32-libtool_2.4.6-15_all.deb ...
Unpacking libtool (2.4.6-15) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../33-dh-autoreconf_20_all.deb ...
Unpacking dh-autoreconf (20) ...
Selecting previously unselected package libarchive-zip-perl.
Preparing to unpack .../34-libarchive-zip-perl_1.68-1_all.deb ...
Unpacking libarchive-zip-perl (1.68-1) ...
Selecting previously unselected package libsub-override-perl.
Preparing to unpack .../35-libsub-override-perl_0.09-2_all.deb ...
Unpacking libsub-override-perl (0.09-2) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../36-libfile-stripnondeterminism-perl_1.12.0-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.12.0-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../37-dh-strip-nondeterminism_1.12.0-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.12.0-1) ...
Selecting previously unselected package libelf1:arm64.
Preparing to unpack .../38-libelf1_0.183-1_arm64.deb ...
Unpacking libelf1:arm64 (0.183-1) ...
Selecting previously unselected package dwz.
Preparing to unpack .../39-dwz_0.13+20210201-1_arm64.deb ...
Unpacking dwz (0.13+20210201-1) ...
Selecting previously unselected package libicu67:arm64.
Preparing to unpack .../40-libicu67_67.1-7_arm64.deb ...
Unpacking libicu67:arm64 (67.1-7) ...
Selecting previously unselected package libxml2:arm64.
Preparing to unpack .../41-libxml2_2.9.10+dfsg-6.7_arm64.deb ...
Unpacking libxml2:arm64 (2.9.10+dfsg-6.7) ...
Selecting previously unselected package gettext.
Preparing to unpack .../42-gettext_0.21-4_arm64.deb ...
Unpacking gettext (0.21-4) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../43-intltool-debian_0.35.0+20060710.5_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.5) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../44-po-debconf_1.0.21+nmu1_all.deb ...
Unpacking po-debconf (1.0.21+nmu1) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../45-debhelper_13.3.4_all.deb ...
Unpacking debhelper (13.3.4) ...
Selecting previously unselected package python3-lib2to3.
Preparing to unpack .../46-python3-lib2to3_3.9.2-1_all.deb ...
Unpacking python3-lib2to3 (3.9.2-1) ...
Selecting previously unselected package python3-distutils.
Preparing to unpack .../47-python3-distutils_3.9.2-1_all.deb ...
Unpacking python3-distutils (3.9.2-1) ...
Selecting previously unselected package dh-python.
Preparing to unpack .../48-dh-python_4.20201102+nmu1_all.deb ...
Unpacking dh-python (4.20201102+nmu1) ...
Setting up media-types (4.0.0) ...
Setting up libpipeline1:arm64 (1.5.3-1) ...
Setting up bsdextrautils (2.36.1-7) ...
update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode
Setting up libicu67:arm64 (67.1-7) ...
Setting up ruby-power-assert (1.1.7-2) ...
Setting up libmagic-mgc (1:5.39-3) ...
Setting up libarchive-zip-perl (1.68-1) ...
Setting up libyaml-0-2:arm64 (0.2.2-1) ...
Setting up libdebhelper-perl (13.3.4) ...
Setting up libmagic1:arm64 (1:5.39-3) ...
Setting up gettext-base (0.21-4) ...
Setting up file (1:5.39-3) ...
Setting up ruby-minitest (5.13.0-1) ...
Setting up autotools-dev (20180224.1+nmu1) ...
Setting up ruby-test-unit (3.3.9-1) ...
Setting up ruby-net-telnet (0.1.1-2) ...
Setting up libsigsegv2:arm64 (2.13-1) ...
Setting up autopoint (0.21-4) ...
Setting up libmd0:arm64 (1.0.3-3) ...
Setting up sensible-utils (0.0.14) ...
Setting up libuchardet0:arm64 (0.0.7-1) ...
Setting up libmpdec3:arm64 (2.5.1-1) ...
Setting up libsub-override-perl (0.09-2) ...
Setting up openssl (1.1.1k-1) ...
Setting up libbsd0:arm64 (0.11.3-1) ...
Setting up libelf1:arm64 (0.183-1) ...
Setting up readline-common (8.1-1) ...
Setting up ruby-xmlrpc (0.3.0-2) ...
Setting up libxml2:arm64 (2.9.10+dfsg-6.7) ...
Setting up libfile-stripnondeterminism-perl (1.12.0-1) ...
Setting up gettext (0.21-4) ...
Setting up libtool (2.4.6-15) ...
Setting up libedit2:arm64 (3.1-20191231-2+b1) ...
Setting up libreadline8:arm64 (8.1-1) ...
Setting up m4 (1.4.18-5) ...
Setting up intltool-debian (0.35.0+20060710.5) ...
Setting up ca-certificates (20210119) ...
Updating certificates in /etc/ssl/certs...
129 added, 0 removed; done.
Setting up autoconf (2.69-14) ...
Setting up dh-strip-nondeterminism (1.12.0-1) ...
Setting up dwz (0.13+20210201-1) ...
Setting up groff-base (1.22.4-6) ...
Setting up libpython3.9-stdlib:arm64 (3.9.2-1) ...
Setting up libpython3-stdlib:arm64 (3.9.2-3) ...
Setting up automake (1:1.16.3-2) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up po-debconf (1.0.21+nmu1) ...
Setting up rubygems-integration (1.18) ...
Setting up man-db (2.9.4-2) ...
Not building database; man-db/auto-update is not 'true'.
Setting up dh-autoreconf (20) ...
Setting up python3.9 (3.9.2-1) ...
Setting up debhelper (13.3.4) ...
Setting up python3 (3.9.2-3) ...
Setting up python3-lib2to3 (3.9.2-1) ...
Setting up python3-distutils (3.9.2-1) ...
Setting up dh-python (4.20201102+nmu1) ...
Setting up ruby2.7 (2.7.4-1) ...
Setting up ruby-rubygems (3.2.5-2) ...
Setting up ruby (1:2.7+2) ...
Setting up ruby-asciidoctor (2.0.12-2) ...
Setting up rake (13.0.3-1) ...
Setting up asciidoctor (2.0.12-2) ...
Setting up libruby2.7:arm64 (2.7.4-1) ...
Processing triggers for libc-bin (2.31-12) ...
Processing triggers for ca-certificates (20210119) ...
Updating certificates in /etc/ssl/certs...
0 added, 0 removed; done.
Running hooks in /etc/ca-certificates/update.d...
done.
Reading package lists...
Building dependency tree...
Reading state information...
Reading extended state information...
Initializing package states...
Writing extended state information...
Building tag database...
-> Finished parsing the build-deps
I: Building the package
I: Running cd /build/wiki2beamer-0.10.0/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../wiki2beamer_0.10.0-4_source.changes
dpkg-buildpackage: info: source package wiki2beamer
dpkg-buildpackage: info: source version 0.10.0-4
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Francisco M Neto <fmneto@fmneto.com>
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture arm64
debian/rules clean
dh clean
debian/rules execute_after_dh_auto_clean
make[1]: Entering directory '/build/wiki2beamer-0.10.0'
[ ! -f doc/man/Makefile ] || /usr/bin/make -C /build/wiki2beamer-0.10.0/doc/man/ clean
make[2]: Entering directory '/build/wiki2beamer-0.10.0/doc/man'
rm -f wiki2beamer.1
rm -f wiki2beamer.html
rm -f man1/wiki2beamer.1.bz2
[ ! -d man1 ] || rmdir man1/
make[2]: Leaving directory '/build/wiki2beamer-0.10.0/doc/man'
make[1]: Leaving directory '/build/wiki2beamer-0.10.0'
dh_clean
debian/rules binary
dh binary
dh_update_autotools_config
dh_autoreconf
debian/rules execute_after_dh_auto_build
make[1]: Entering directory '/build/wiki2beamer-0.10.0'
/usr/bin/make -C /build/wiki2beamer-0.10.0/doc/man/
make[2]: Entering directory '/build/wiki2beamer-0.10.0/doc/man'
mkdir man1
WIKI2BEAMER(1) WIKI2BEAMER WIKI2BEAMER(1)
NAME
wiki2beamer - convert wiki-formatted text to latex-beamer code
SYNOPSIS
wiki2beamer [OPTION...] [FILE...]
DESCRIPTION
FILE
the text-file(s) to be processed
-h, --help
show a short usage help
--version
show version information
-o,--output FILE
write output to FILE instead of stdout
USAGE
Usually you want to pipe the output of wiki2beamer into a file:
wiki2beamer footalk.txt > footalk.tex
If called with multiple input files, wiki2beamer processes them in
order with their content being simply concatenated. If called without
any input file, wiki2beamer will attempt to read input from STDIN. If
no input files are supplied and nothing is available on STDIN,
wiki2beamer prints its usage message and exits.
If an error occurs, wiki2beamer returns a return code other then 0.
SYNTAX
Wiki2beamer has it's own wiki-syntax which (evolved without much of a
concept ;) and) is described below. Everything that is unknown to
wiki2beamer will be passed through to the LaTeX output (unless inside
special environments).
Overall Structure
A wiki2beamer txt file can consist of two sections: the head and the
body. The head is optional and is an autotemplate environment. The body
contains the content of the document. If the head (autotemplate) is not
given, then only the code for the body will be generated and can be
included into a manually crafted LaTeX template file.
Managing Input
You can split input to wiki2beamer into multiple files. This helps to
keep things apart and avoids conflicts. There are two ways to split
input. The first is to use multiple input files which wiki2beamer will
read and process in order as if they were one concatenated file. The
second is to use the >>>include<<< syntax.
>>>includefile<<<
Include the file named includefile at this line. Works recursively.
Endless recursion will be detected and treated as an error.
Including files doesn't work inside [nowiki] and [code]
environments (see below).
Structuring the Presentation
== sectionname ==
opens a section called sectionname
== longsectionname ==[shortname]
opens a section called longsectionname, passing the parameter
shortname to latex
=== subsectname ===
opens a subsection called subsectname
=== longsubsectname ===[shortname]
opens a subsection called longsubsectname, passing the parameter
shortname to latex
==== frametitle ====_
opens a frame with the title frametitle
==== frametitle ====[param]
opens a frame with the title frametitle, passes frame parameters
like t, fragile, verbatim etc. to latex
!==== frametitle ====[param]
the ! added in front of a frame, selects a frame for exclusive
generation. It makes wiki2beamer skip all frames that are not
selected. You can select multiple frames. This can speed up the
edit-compile-view cycle massively.
Sectioning commands work only at the beginning of a line.
Lists (Bullets/Enumerations)
* text
create a bullet (itemize) with text
*<onslide> text
create a bullet (itemize) with text that only appears on the
specified slides (onslide)
# text
create a numbered item (enumerate) with text
#<onslide> text
create a numbered item (enumerate) with text that only appears on
the specified slides (onslide)
Cascaded lists, mixed ordered and unordered items:
* This is a crazy list.
*# It contains different items.
*# In different formats.
*** On different levels.
***<2-> which are animated
*<3-> Quite a lot of fun.
**<4-> Isn't it?
Environments
LaTeX knows many environments, some of which are as simple as
\begin{center} \end{center}, others are more complicated. To use these
in a more wiki-like fashion, use <[name] to open and [name]> to close
environments. It will be simply converted to \begin{name} and
end{name}.
Warning
No parsing is done. The user is responsible for closing any opened
environment. Environment-tags are only recognized at the beginning of a
line.
Special Environments
Unlike standard environments, some environment names are recognized by
wiki2beamer. These are: nowiki, code, autotemplate and frame. If
wiki2beamer detects one of these it will do some advanced parsing,
which can even fail with a syntax error.
Autotemplate
Autotemplate can be used at the beginning of a beamer .txt file. It
will create the required LaTeX headers to compile the content.
<[autotemplate]
opens the autotemplate environment
[autotemplate]>
close the autotemplate environment
key=value (inside [autotemplate])_
insert a template command \keyvalue
key=value pairs are converted to \keyvalue in the output (except
special keys) -- everything after = is just appended to \key.
<[autotemplate]
usepackage=[utf8]{inputenc}
[autotemplate]>
will be converted to \usepackage[utf8]{inputenc}.
There is a built-in set of options:
<[autotemplate]
documentclass={beamer}
usepackage={listings}
usepackage={wasysym}
usepackage={graphicx}
date={\today}
lstdefinestyle={basic}{....}
titleframe=True
[autotemplate]>
titleframe is a special key that tells wiki2beamer to create a title
frame. To set the title, subtitle and author of the presentation use
the keys title, subtitle and author. Overriding of the default options
works on:
o per-key level for: documentclass, titleframe
o per-package level for: usepackage
o no overriding for: everything else
Code
Use code-environments to display animated code listings.
<[code]
open a code environment
<[code][param]
open a code environment passing parameters to the latex lstlisting
environment.
[code]>
close the code environment
<[code][key=value,...]
...
[code]>
<[code] opens the environment, [code]> closes it, everything after
<[code] is passed to the LaTeX listings package as options for this
listing. Inside the code environment, [ and ] must be escaped as \[ and
\]. Things between [ and ] are animations. There are two kinds of
animations:
o [<slidespec>some code] - show "some code" only on specified slides
o [[<slidespec>some code][<slidespec>some other code]] - show "some
code" on the slides in the first spec, show "some other code" on
the slides in the second spec, fill up space on slides without
content with spaces
Slide-specs can be of the form:
o n - one single frame n
o n-m - sequence of frames n to m
o spec,spec,... - combine multiple specs into on (e.g. <1-3,5>)
Nowiki
Nowiki-Environments completely escape from wiki2beamer replacements.
<[nowiki] opens the environment, [nowiki]> closes it.
Frame
The LaTeX-frame environment is where the content of a slide goes. You
can manually close a frame-environment which was opened with ====
Frametitle ==== with [frame]>. Wiki2beamer is then aware that the last
frame is already closed and doesn't try to close it again.
Text Formatting
'''text'''
typeset text bold
''text''
typeset text italic
@text@
typeset text in typewriter type, to ignore an @, escape it as \@
!text!
alert text, to ignore an !, escape it as \!
_ color _ text _
make text appear in color
Columns
<[columns]
opens the column environment
[[[ width ]]]
creates a column of width, everything below goes into this column
[columns]>
closes the column environment
Graphics
<<<pathtofile>>>
include image from pathtofile
<<<pathtofile,_key=value_>>>
include image from pathtofile passing key=value parameters to latex
Footnotes
create a footnote containing text
Layout
--length--
when found at start of line, with nothing afterwards, insert a
\vspace{length} (vertical space of length length)
--*length--
same as above, but insert a \vspace* (a forced vspace)
+<_overlay_>{content}
\uncover the content on the given overlay subframes. They will
already take up the space, they need to be displayed, so the
geometry of the frame doesn't change when the element pops up.
-<_overlay_>{content}
\only show the content on the given overlay subframes. They will
not take up the space they need to be displayed, so the geometry of
the frame changes when the element pops up.
Substitutions
-->
becomes $\rightarrow$
==>
becomes $\Rightarrow$
<--
becomes $\leftarrow$
<==
becomes $\Leftarrow$
:-)
becomes \smiley (requires package wasysym)
:-(
becomes \frownie (requires package wasysym)
Frame Headers/Footers
There are two variables, FRAMEHEADER and FRAMEFOOTER. The content of
these will be inserted at the beginning/end of all following slides.
@FRAMEHEADER=text
set frameheader to text
@FRAMEFOOTER=text
set framefooter to text
Leave text empty to reset frame headers and footers.
LICENSE
Copyright (C) 2009 Kai Dietrich, Michael Rentzsch and others.
Documentation License
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation;
Code License
wiki2beamer is free software: you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation, either version 2 of the License, or (at your
option) any later version.
AUTHOR
wiki2beamer developers
WIKI2BEAMER 2020-09-15 WIKI2BEAMER(1)
asciidoctor -b html5 -d manpage wiki2beamer.adoc
make[2]: Leaving directory '/build/wiki2beamer-0.10.0/doc/man'
make[1]: Leaving directory '/build/wiki2beamer-0.10.0'
create-stamp debian/debhelper-build-stamp
dh_prep
dh_install
dh_installdocs
dh_installchangelogs
dh_installexamples
dh_installman
debian/rules override_dh_python3
make[1]: Entering directory '/build/wiki2beamer-0.10.0'
dh_python3 --shebang=/usr/bin/python3
I: dh_python3 tools:114: replacing shebang in debian/wiki2beamer/usr/bin/wiki2beamer
make[1]: Leaving directory '/build/wiki2beamer-0.10.0'
dh_perl
dh_link
dh_strip_nondeterminism
dh_compress
dh_fixperms
dh_missing
dh_installdeb
dh_gencontrol
dh_md5sums
dh_builddeb
dpkg-deb: building package 'wiki2beamer' in '../wiki2beamer_0.10.0-4_all.deb'.
dpkg-genbuildinfo --build=binary
dpkg-genchanges --build=binary >../wiki2beamer_0.10.0-4_arm64.changes
dpkg-genchanges: info: binary-only upload (no source code included)
dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
dpkg-genchanges: info: not including original source code in upload
I: copying local configuration
I: unmounting dev/ptmx filesystem
I: unmounting dev/pts filesystem
I: unmounting dev/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
I: removing directory /srv/workspace/pbuilder/19325 and its subdirectories
I: Current time: Fri Jul 23 08:01:56 -12 2021
I: pbuilder-time-stamp: 1627070516
Fri Jul 23 20:01:58 UTC 2021 I: 1st build successful. Starting 2nd build on remote node codethink9-arm64.debian.net.
Fri Jul 23 20:01:58 UTC 2021 I: Preparing to do remote build '2' on codethink9-arm64.debian.net.
Fri Jul 23 20:02:50 UTC 2021 I: Deleting $TMPDIR on codethink9-arm64.debian.net.
Fri Jul 23 20:02:50 UTC 2021 I: wiki2beamer_0.10.0-4_arm64.changes:
Format: 1.8
Date: Tue, 15 Sep 2020 16:50:06 +0000
Source: wiki2beamer
Binary: wiki2beamer
Architecture: all
Version: 0.10.0-4
Distribution: unstable
Urgency: medium
Maintainer: Francisco M Neto <fmneto@fmneto.com>
Changed-By: Francisco M Neto <fmneto@fmneto.com>
Description:
wiki2beamer - Tool to create LaTeX beamer presentations in wiki syntax
Closes: 968620
Changes:
wiki2beamer (0.10.0-4) unstable; urgency=medium
.
* New Maintainer. Thanks to Boyuan Wang for their work! (Closes: #968620)
* debian/control:
- Added Rules-Requires-Root field.
* debian/copyright: updated to comply with DEP-5.
* debian/upstream/metadata: added bug tracking-related fields.
* debian/rules:
- updated execute_after_dh_auto_clean to test for the Makefile.
* debian/patches: created patch to fix the Makefile under doc/man/.
Checksums-Sha1:
446b86fc9affdee7113d2cb841a542c76d4efd56 35872 wiki2beamer_0.10.0-4_all.deb
60e83f22b2aa5307a88fa3d6edc8cca555a0a548 5604 wiki2beamer_0.10.0-4_arm64.buildinfo
Checksums-Sha256:
4e7b3c2da8d82bb75931737d323aebdb0b8a05b5b6fef741572a303859b3d59c 35872 wiki2beamer_0.10.0-4_all.deb
53d5e86ab8ae60e4463c9a063ba4e8529bab16984ef9d617667a2ac02ed98853 5604 wiki2beamer_0.10.0-4_arm64.buildinfo
Files:
784ae18a4b228f734fbcdfb6df63b92d 35872 text optional wiki2beamer_0.10.0-4_all.deb
6593316c87b326d72ac9f33724b5150e 5604 text optional wiki2beamer_0.10.0-4_arm64.buildinfo
Fri Jul 23 20:02:52 UTC 2021 I: diffoscope 177 will be used to compare the two builds:
# Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.ELRl5NpM1V/wiki2beamer_0.10.0-4.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.ELRl5NpM1V/wiki2beamer_0.10.0-4.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.ELRl5NpM1V/wiki2beamer_0.10.0-4.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.ELRl5NpM1V/b1/wiki2beamer_0.10.0-4_arm64.changes /srv/reproducible-results/rbuild-debian/tmp.ELRl5NpM1V/b2/wiki2beamer_0.10.0-4_arm64.changes
## command (total time: 0.000s)
0.000s 1 call cmp (internal)
## has_same_content_as (total time: 0.000s)
0.000s 1 call abc.DotChangesFile
## main (total time: 0.357s)
0.357s 2 calls outputs
0.000s 1 call cleanup
## recognizes (total time: 0.030s)
0.030s 10 calls diffoscope.comparators.binary.FilesystemFile
0.000s 8 calls abc.DotChangesFile
Fri Jul 23 20:02:54 UTC 2021 I: diffoscope 177 found no differences in the changes files, and a .buildinfo file also exists.
Fri Jul 23 20:02:54 UTC 2021 I: wiki2beamer from bullseye built successfully and reproducibly on arm64.
Fri Jul 23 20:02:56 UTC 2021 I: Submitting .buildinfo files to external archives:
Fri Jul 23 20:02:56 UTC 2021 I: Submitting 8.0K b1/wiki2beamer_0.10.0-4_arm64.buildinfo.asc
Fri Jul 23 20:02:57 UTC 2021 I: Submitting 8.0K b2/wiki2beamer_0.10.0-4_arm64.buildinfo.asc
Fri Jul 23 20:02:58 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit.
Fri Jul 23 20:02:58 UTC 2021 I: Done submitting .buildinfo files.
Fri Jul 23 20:02:58 UTC 2021 I: Removing signed wiki2beamer_0.10.0-4_arm64.buildinfo.asc files:
removed './b1/wiki2beamer_0.10.0-4_arm64.buildinfo.asc'
removed './b2/wiki2beamer_0.10.0-4_arm64.buildinfo.asc'