Thu Aug 13 09:21:09 UTC 2020 I: starting to build libarchive-extract-perl/buster/arm64 on jenkins on '2020-08-13 09:21' Thu Aug 13 09:21:09 UTC 2020 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_31/7733/console.log Thu Aug 13 09:21:09 UTC 2020 I: Downloading source for buster/libarchive-extract-perl=0.80-1 --2020-08-13 09:21:10-- http://deb.debian.org/debian/pool/main/liba/libarchive-extract-perl/libarchive-extract-perl_0.80-1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2346 (2.3K) Saving to: ‘libarchive-extract-perl_0.80-1.dsc’ 0K .. 100% 193M=0s 2020-08-13 09:21:10 (193 MB/s) - ‘libarchive-extract-perl_0.80-1.dsc’ saved [2346/2346] Thu Aug 13 09:21:10 UTC 2020 I: libarchive-extract-perl_0.80-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libarchive-extract-perl Binary: libarchive-extract-perl Architecture: all Version: 0.80-1 Maintainer: Debian Perl Group Uploaders: gregor herrmann Homepage: https://metacpan.org/release/Archive-Extract Standards-Version: 3.9.8 Vcs-Browser: https://anonscm.debian.org/cgit/pkg-perl/packages/libarchive-extract-perl.git Vcs-Git: https://anonscm.debian.org/git/pkg-perl/packages/libarchive-extract-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper (>= 9) Build-Depends-Indep: perl, libmodule-load-conditional-perl (>= 0.66) | perl (>= 5.25.4) Package-List: libarchive-extract-perl deb perl optional arch=all Checksums-Sha1: 5b0ca7dea8867323bc10e0c71c5a5d3a8893665a 27813 libarchive-extract-perl_0.80.orig.tar.gz 55bcb07439a259c36afb1b586998f1e5ba5ae5dd 2144 libarchive-extract-perl_0.80-1.debian.tar.xz Checksums-Sha256: 25cbc2d5626c14d39a0b5e4fe8383941e085c9a7e0aa873d86e81b6e709025f4 27813 libarchive-extract-perl_0.80.orig.tar.gz 04a572f32a0852ba560a93bb2a84a885c6d29999f5ffedb3fd42f8aeafd595bb 2144 libarchive-extract-perl_0.80-1.debian.tar.xz Files: 03bba7ac7f5190d55575764f38fe9028 27813 libarchive-extract-perl_0.80.orig.tar.gz dc46a4338ebe2fcff7c63419e9f09393 2144 libarchive-extract-perl_0.80-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAliDlcBfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgaKdQ/+JlYQ272EdgLkohUO6yesHIjZXhgHyRbcbpMLii37Jrj5l8xadUnP1CoK czONkBE917B01HcWsjfTTFot+6ypq2+HphtiYXYhlMqJp2QPLH7k/V4j7rPjT1Y+ EsWSnXEnyXEEF+bXSgRPDICBv0aZbr2cxTzgpU/zUTo2YFwndugp8hSNy0p0vQxv nT1xPZEfAGcwkc1oEEuzgkUW0cmVkSUm8Jmy+2a+mSieTnOvNhcJLQolyWj97DoM O/69jQDU1t6dPH5cNUunulGuA/v+yACAv3/8iUSzA9isVSaYubxiSBGtit02ls5+ iXEjE/lPRUY7ve7+DBmhmEc38T3epYc9vz1QLV0Zs1EBRav4HltLrpHTm1Y1qyp6 6fVPjiTSt1c5keVDJbm/1tHIq4CsERRaT7RU1RilpSXDm3R/sHgiCWgglhX7JqnW iferYlRZ2uOIiLtGtDYgVEBA8fD4Dus4b+IHfQK/xrg4XeovO2Zcm7iCE6MOLn5I o5wIMC8GEfgYF3kaeSfnWWNhIpR2O9FN1Qz9hpTh3Pty7LtrVOzj/jn9yYkwFsqf 9oUhsnSJzI2HJWNNBRMHVt6j2xfmd/JWCSiRAxqwDtPvkYi24IJsytQqTu32krkt YoCRResaAKkUFsrf5BGLm3w1aiBN0WMzHKFXiSmpumB5T1xfskI= =0r+B -----END PGP SIGNATURE----- Thu Aug 13 09:21:10 UTC 2020 I: Checking whether the package is not for us Thu Aug 13 09:21:10 UTC 2020 I: Starting 1st build on remote node codethink-sled16-arm64.debian.net. Thu Aug 13 09:21:10 UTC 2020 I: Preparing to do remote build '1' on codethink-sled16-arm64.debian.net. Thu Aug 13 09:22:14 UTC 2020 I: Deleting $TMPDIR on codethink-sled16-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Wed Aug 12 21:21:19 -12 2020 I: pbuilder-time-stamp: 1597310479 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libarchive-extract-perl_0.80-1.dsc] I: copying [./libarchive-extract-perl_0.80.orig.tar.gz] I: copying [./libarchive-extract-perl_0.80-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/var/lib/jenkins/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Sat Jan 21 05:09:20 2017 -12 gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libarchive-extract-perl_0.80-1.dsc dpkg-source: info: extracting libarchive-extract-perl in libarchive-extract-perl-0.80 dpkg-source: info: unpacking libarchive-extract-perl_0.80.orig.tar.gz dpkg-source: info: unpacking libarchive-extract-perl_0.80-1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/13680/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=8' DISTRIBUTION='' HOME='/var/lib/jenkins' HOST_ARCH='arm64' IFS=' ' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='13680' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.RANhRB1E19/pbuilderrc_cKmg --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/buster-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.RANhRB1E19/b1 --logfile b1/build.log libarchive-extract-perl_0.80-1.dsc' SUDO_GID='117' SUDO_UID='110' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' USERNAME='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.16:3128' I: uname -a Linux codethink-sled16-arm64 4.4.0-186-generic #216-Ubuntu SMP Wed Jul 1 05:35:21 UTC 2020 aarch64 GNU/Linux I: ls -l /bin total 4928 -rwxr-xr-x 1 root root 1216928 Apr 17 2019 bash -rwxr-xr-x 3 root root 34808 Jul 10 2019 bunzip2 -rwxr-xr-x 3 root root 34808 Jul 10 2019 bzcat lrwxrwxrwx 1 root root 6 Jul 10 2019 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2227 Jul 10 2019 bzdiff lrwxrwxrwx 1 root root 6 Jul 10 2019 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Jun 24 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 10 2019 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3641 Jul 10 2019 bzgrep -rwxr-xr-x 3 root root 34808 Jul 10 2019 bzip2 -rwxr-xr-x 1 root root 14264 Jul 10 2019 bzip2recover lrwxrwxrwx 1 root root 6 Jul 10 2019 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 10 2019 bzmore -rwxr-xr-x 1 root root 35576 Feb 28 2019 cat -rwxr-xr-x 1 root root 60256 Feb 28 2019 chgrp -rwxr-xr-x 1 root root 56096 Feb 28 2019 chmod -rwxr-xr-x 1 root root 64368 Feb 28 2019 chown -rwxr-xr-x 1 root root 134632 Feb 28 2019 cp -rwxr-xr-x 1 root root 129536 Jan 17 2019 dash -rwxr-xr-x 1 root root 97136 Feb 28 2019 date -rwxr-xr-x 1 root root 76736 Feb 28 2019 dd -rwxr-xr-x 1 root root 93752 Feb 28 2019 df -rwxr-xr-x 1 root root 138848 Feb 28 2019 dir -rwxr-xr-x 1 root root 75984 Jan 9 2019 dmesg lrwxrwxrwx 1 root root 8 Sep 26 2018 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Sep 26 2018 domainname -> hostname -rwxr-xr-x 1 root root 31368 Feb 28 2019 echo -rwxr-xr-x 1 root root 28 Jan 7 2019 egrep -rwxr-xr-x 1 root root 27256 Feb 28 2019 false -rwxr-xr-x 1 root root 28 Jan 7 2019 fgrep -rwxr-xr-x 1 root root 68792 Jan 9 2019 findmnt -rwsr-xr-x 1 root root 34824 Apr 22 07:38 fusermount -rwxr-xr-x 1 root root 174304 Jan 7 2019 grep -rwxr-xr-x 2 root root 2345 Jan 5 2019 gunzip -rwxr-xr-x 1 root root 6375 Jan 5 2019 gzexe -rwxr-xr-x 1 root root 89656 Jan 5 2019 gzip -rwxr-xr-x 1 root root 18440 Sep 26 2018 hostname -rwxr-xr-x 1 root root 64472 Feb 28 2019 ln -rwxr-xr-x 1 root root 52544 Jul 26 2018 login -rwxr-xr-x 1 root root 138848 Feb 28 2019 ls -rwxr-xr-x 1 root root 108552 Jan 9 2019 lsblk -rwxr-xr-x 1 root root 76840 Feb 28 2019 mkdir -rwxr-xr-x 1 root root 64480 Feb 28 2019 mknod -rwxr-xr-x 1 root root 39736 Feb 28 2019 mktemp -rwxr-xr-x 1 root root 38840 Jan 9 2019 more -rwsr-xr-x 1 root root 47112 Jan 9 2019 mount -rwxr-xr-x 1 root root 14344 Jan 9 2019 mountpoint -rwxr-xr-x 1 root root 138736 Feb 28 2019 mv lrwxrwxrwx 1 root root 8 Sep 26 2018 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Feb 14 2019 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 35560 Feb 28 2019 pwd lrwxrwxrwx 1 root root 4 Apr 17 2019 rbash -> bash -rwxr-xr-x 1 root root 43712 Feb 28 2019 readlink -rwxr-xr-x 1 root root 68440 Feb 28 2019 rm -rwxr-xr-x 1 root root 39624 Feb 28 2019 rmdir -rwxr-xr-x 1 root root 19144 Jan 21 2019 run-parts -rwxr-xr-x 1 root root 114016 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Aug 12 20:26 sh -> dash -rwxr-xr-x 1 root root 31384 Feb 28 2019 sleep -rwxr-xr-x 1 root root 72480 Feb 28 2019 stty -rwsr-xr-x 1 root root 59424 Jan 9 2019 su -rwxr-xr-x 1 root root 31416 Feb 28 2019 sync -rwxr-xr-x 1 root root 449416 Apr 23 2019 tar -rwxr-xr-x 1 root root 10560 Jan 21 2019 tempfile -rwxr-xr-x 1 root root 88968 Feb 28 2019 touch -rwxr-xr-x 1 root root 27256 Feb 28 2019 true -rwxr-xr-x 1 root root 14264 Apr 22 07:38 ulockmgr_server -rwsr-xr-x 1 root root 30728 Jan 9 2019 umount -rwxr-xr-x 1 root root 31384 Feb 28 2019 uname -rwxr-xr-x 2 root root 2345 Jan 5 2019 uncompress -rwxr-xr-x 1 root root 138848 Feb 28 2019 vdir -rwxr-xr-x 1 root root 34824 Jan 9 2019 wdctl -rwxr-xr-x 1 root root 946 Jan 21 2019 which lrwxrwxrwx 1 root root 8 Sep 26 2018 ypdomainname -> hostname -rwxr-xr-x 1 root root 1983 Jan 5 2019 zcat -rwxr-xr-x 1 root root 1677 Jan 5 2019 zcmp -rwxr-xr-x 1 root root 5879 Jan 5 2019 zdiff -rwxr-xr-x 1 root root 29 Jan 5 2019 zegrep -rwxr-xr-x 1 root root 29 Jan 5 2019 zfgrep -rwxr-xr-x 1 root root 2080 Jan 5 2019 zforce -rwxr-xr-x 1 root root 7584 Jan 5 2019 zgrep -rwxr-xr-x 1 root root 2205 Jan 5 2019 zless -rwxr-xr-x 1 root root 1841 Jan 5 2019 zmore -rwxr-xr-x 1 root root 4552 Jan 5 2019 znew I: user script /srv/workspace/pbuilder/13680/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 9), perl, libmodule-load-conditional-perl (>= 0.66) | perl (>= 5.25.4) dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19168 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 9); however: Package debhelper is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbsd0{a} libcroco3{a} libelf1{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libncurses6{a} libpipeline1{a} libsigsegv2{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libglib2.0-data libgpm2 libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 33 newly installed, 0 to remove and 0 not upgraded. Need to get 18.6 MB of archives. After unpacking 69.2 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main arm64 libbsd0 arm64 0.9.1-2 [97.4 kB] Get: 2 http://deb.debian.org/debian buster/main arm64 bsdmainutils arm64 11.1.2+b1 [185 kB] Get: 3 http://deb.debian.org/debian buster/main arm64 libuchardet0 arm64 0.0.6-3 [65.0 kB] Get: 4 http://deb.debian.org/debian buster/main arm64 groff-base arm64 1.22.4-3 [869 kB] Get: 5 http://deb.debian.org/debian buster/main arm64 libpipeline1 arm64 1.5.1-2 [29.8 kB] Get: 6 http://deb.debian.org/debian buster/main arm64 man-db arm64 2.8.5-2 [1258 kB] Get: 7 http://deb.debian.org/debian buster/main arm64 sensible-utils all 0.0.12 [15.8 kB] Get: 8 http://deb.debian.org/debian buster/main arm64 libmagic-mgc arm64 1:5.35-4+deb10u1 [242 kB] Get: 9 http://deb.debian.org/debian buster/main arm64 libmagic1 arm64 1:5.35-4+deb10u1 [115 kB] Get: 10 http://deb.debian.org/debian buster/main arm64 file arm64 1:5.35-4+deb10u1 [66.4 kB] Get: 11 http://deb.debian.org/debian buster/main arm64 gettext-base arm64 0.19.8.1-9 [120 kB] Get: 12 http://deb.debian.org/debian buster/main arm64 libsigsegv2 arm64 2.12-2 [32.3 kB] Get: 13 http://deb.debian.org/debian buster/main arm64 m4 arm64 1.4.18-2 [198 kB] Get: 14 http://deb.debian.org/debian buster/main arm64 autoconf all 2.69-11 [341 kB] Get: 15 http://deb.debian.org/debian buster/main arm64 autotools-dev all 20180224.1 [77.0 kB] Get: 16 http://deb.debian.org/debian buster/main arm64 automake all 1:1.16.1-4 [771 kB] Get: 17 http://deb.debian.org/debian buster/main arm64 autopoint all 0.19.8.1-9 [434 kB] Get: 18 http://deb.debian.org/debian buster/main arm64 libtool all 2.4.6-9 [547 kB] Get: 19 http://deb.debian.org/debian buster/main arm64 dh-autoreconf all 19 [16.9 kB] Get: 20 http://deb.debian.org/debian buster/main arm64 libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 21 http://deb.debian.org/debian buster/main arm64 libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 22 http://deb.debian.org/debian buster/main arm64 dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 23 http://deb.debian.org/debian buster/main arm64 libelf1 arm64 0.176-1.1 [160 kB] Get: 24 http://deb.debian.org/debian buster/main arm64 dwz arm64 0.12-3 [71.7 kB] Get: 25 http://deb.debian.org/debian buster/main arm64 libglib2.0-0 arm64 2.58.3-2+deb10u2 [1185 kB] Get: 26 http://deb.debian.org/debian buster/main arm64 libicu63 arm64 63.1-6+deb10u1 [8151 kB] Get: 27 http://deb.debian.org/debian buster/main arm64 libxml2 arm64 2.9.4+dfsg1-7+b3 [623 kB] Get: 28 http://deb.debian.org/debian buster/main arm64 libcroco3 arm64 0.6.12-3 [140 kB] Get: 29 http://deb.debian.org/debian buster/main arm64 libncurses6 arm64 6.1+20181013-2+deb10u2 [92.6 kB] Get: 30 http://deb.debian.org/debian buster/main arm64 gettext arm64 0.19.8.1-9 [1261 kB] Get: 31 http://deb.debian.org/debian buster/main arm64 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 32 http://deb.debian.org/debian buster/main arm64 po-debconf all 1.0.21 [248 kB] Get: 33 http://deb.debian.org/debian buster/main arm64 debhelper all 12.1.1 [1016 kB] Fetched 18.6 MB in 1s (13.9 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:arm64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19168 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_arm64.deb ... Unpacking libbsd0:arm64 (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_arm64.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../02-libuchardet0_0.0.6-3_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_arm64.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../04-libpipeline1_1.5.1-2_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_arm64.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../06-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../07-libmagic-mgc_1%3a5.35-4+deb10u1_arm64.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:arm64. Preparing to unpack .../08-libmagic1_1%3a5.35-4+deb10u1_arm64.deb ... Unpacking libmagic1:arm64 (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../09-file_1%3a5.35-4+deb10u1_arm64.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../10-gettext-base_0.19.8.1-9_arm64.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:arm64. Preparing to unpack .../11-libsigsegv2_2.12-2_arm64.deb ... Unpacking libsigsegv2:arm64 (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-2_arm64.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:arm64. Preparing to unpack .../22-libelf1_0.176-1.1_arm64.deb ... Unpacking libelf1:arm64 (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.12-3_arm64.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:arm64. Preparing to unpack .../24-libglib2.0-0_2.58.3-2+deb10u2_arm64.deb ... Unpacking libglib2.0-0:arm64 (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:arm64. Preparing to unpack .../25-libicu63_63.1-6+deb10u1_arm64.deb ... Unpacking libicu63:arm64 (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../26-libxml2_2.9.4+dfsg1-7+b3_arm64.deb ... Unpacking libxml2:arm64 (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:arm64. Preparing to unpack .../27-libcroco3_0.6.12-3_arm64.deb ... Unpacking libcroco3:arm64 (0.6.12-3) ... Selecting previously unselected package libncurses6:arm64. Preparing to unpack .../28-libncurses6_6.1+20181013-2+deb10u2_arm64.deb ... Unpacking libncurses6:arm64 (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.19.8.1-9_arm64.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Setting up libpipeline1:arm64 (1.5.1-2) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:arm64 (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libmagic1:arm64 (1:5.35-4+deb10u1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libicu63:arm64 (63.1-6+deb10u1) ... Setting up autotools-dev (20180224.1) ... Setting up libncurses6:arm64 (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:arm64 (2.12-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:arm64 (0.0.6-3) ... Setting up libbsd0:arm64 (0.9.1-2) ... Setting up libelf1:arm64 (0.176-1.1) ... Setting up libxml2:arm64 (2.9.4+dfsg1-7+b3) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libtool (2.4.6-9) ... Setting up m4 (1.4.18-2) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:arm64 (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up gettext (0.19.8.1-9) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up po-debconf (1.0.21) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/libarchive-extract-perl-0.80/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package libarchive-extract-perl dpkg-buildpackage: info: source version 0.80-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_auto_configure perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -ffile-prefix-map=/build/libarchive-extract-perl-0.80=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/libarchive-extract-perl-0.80=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Archive::Extract Writing MYMETA.yml and MYMETA.json dh_auto_build make -j1 make[1]: Entering directory '/build/libarchive-extract-perl-0.80' cp lib/Archive/Extract.pm blib/lib/Archive/Extract.pm Manifying 1 pod document make[1]: Leaving directory '/build/libarchive-extract-perl-0.80' dh_auto_test make -j1 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libarchive-extract-perl-0.80' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/01_Archive-Extract.t .. ok 1 - use Archive::Extract; ok 2 - Archive::Extract->can('types') ok 3 - Got a list of types ok 4 - Object created based on 'tgz' ok 5 - No error logged ok 6 - Object created based on 'tar' ok 7 - No error logged ok 8 - Object created based on 'gz' ok 9 - No error logged ok 10 - Object created based on 'zip' ok 11 - No error logged ok 12 - Object created based on 'bz2' ok 13 - No error logged ok 14 - Object created based on 'tbz' ok 15 - No error logged ok 16 - Object created based on 'Z' ok 17 - No error logged ok 18 - Object created based on 'lzma' ok 19 - No error logged ok 20 - Object created based on 'xz' ok 21 - No error logged ok 22 - Object created based on 'txz' ok 23 - No error logged ok 24 - No archive created based on '01_Archive-Extract.t' ok 25 - Error not captured in class method ok 26 - Error captured as warning ok 27 - Error is: unknown file type ok 28 - Archive created ok 29 - No errors yet ok 30 - Errors retrieved ok 31 - As expected ok 32 - Errors erased after ->extract() call ok 33 - Found extraction dir '/build/libarchive-extract-perl-0.80/t/src' ok 34 - Is expected dir '/build/libarchive-extract-perl-0.80/t/src' ok 35 - Found extraction dir '/build/libarchive-extract-perl-0.80/t/src' ok 36 - Is expected dir '/build/libarchive-extract-perl-0.80/t/src' ok 37 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 38 - Archive type is_zip recognized properly ok 39 # skip No binaries or modules to extract x.war ok 40 # skip No binaries or modules to extract x.war ok 41 # skip No binaries or modules to extract x.war ok 42 # skip No binaries or modules to extract x.war ok 43 # skip No binaries or modules to extract x.war ok 44 # skip No binaries or modules to extract x.war ok 45 # skip No binaries or modules to extract x.war ok 46 # skip No binaries or modules to extract x.war ok 47 # skip No binaries or modules to extract x.war ok 48 # skip No binaries or modules to extract x.war ok 49 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 50 - Archive type is_zip recognized properly ok 51 # skip No binaries or modules to extract y.par ok 52 # skip No binaries or modules to extract y.par ok 53 # skip No binaries or modules to extract y.par ok 54 # skip No binaries or modules to extract y.par ok 55 # skip No binaries or modules to extract y.par ok 56 # skip No binaries or modules to extract y.par ok 57 # skip No binaries or modules to extract y.par ok 58 # skip No binaries or modules to extract y.par ok 59 # skip No binaries or modules to extract y.par ok 60 # skip No binaries or modules to extract y.par ok 61 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 62 - Archive type is_tgz recognized properly ok 63 - extract() for 'x.tgz' reports success (PP: 0 Bin: 1) ok 64 - No errors capturing buffers ok 65 - Found correct number of output files (a) ok 66 - Found correct output file 'a' ok 67 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 68 - Extract dir found ok 69 - Extract dir exists ok 70 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 71 - Output file successfully removed ok 72 - rmtree gave no error ok 73 - Extract dir successfully removed ok 74 # skip No buffers available ok 75 # skip No buffers available ok 76 # skip No buffers available ok 77 # skip No buffers available ok 78 # skip No buffers available ok 79 # skip No buffers available ok 80 # skip No buffers available ok 81 # skip No buffers available ok 82 - Output file successfully removed ok 83 # skip No extract path captured, can't remove paths ok 84 # skip No extract path captured, can't remove paths ok 85 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 86 - Archive type is_tgz recognized properly ok 87 - extract() for 'x.tgz' reports success (PP: 0 Bin: 1) ok 88 - No errors capturing buffers ok 89 - Found correct number of output files (a) ok 90 - Found correct output file 'a' ok 91 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 92 - Extract dir found ok 93 - Extract dir exists ok 94 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 95 - Output file successfully removed ok 96 - rmtree gave no error ok 97 - Extract dir successfully removed ok 98 # skip No buffers available ok 99 # skip No buffers available ok 100 # skip No buffers available ok 101 # skip No buffers available ok 102 # skip No buffers available ok 103 # skip No buffers available ok 104 # skip No buffers available ok 105 # skip No buffers available ok 106 - Output file successfully removed ok 107 # skip No extract path captured, can't remove paths ok 108 # skip No extract path captured, can't remove paths ok 109 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 110 - Archive type is_zip recognized properly ok 111 # skip No binaries or modules to extract double_dir.zip ok 112 # skip No binaries or modules to extract double_dir.zip ok 113 # skip No binaries or modules to extract double_dir.zip ok 114 # skip No binaries or modules to extract double_dir.zip ok 115 # skip No binaries or modules to extract double_dir.zip ok 116 # skip No binaries or modules to extract double_dir.zip ok 117 # skip No binaries or modules to extract double_dir.zip ok 118 # skip No binaries or modules to extract double_dir.zip ok 119 # skip No binaries or modules to extract double_dir.zip ok 120 # skip No binaries or modules to extract double_dir.zip ok 121 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 122 - Archive type is_zip recognized properly ok 123 # skip No binaries or modules to extract y.war ok 124 # skip No binaries or modules to extract y.war ok 125 # skip No binaries or modules to extract y.war ok 126 # skip No binaries or modules to extract y.war ok 127 # skip No binaries or modules to extract y.war ok 128 # skip No binaries or modules to extract y.war ok 129 # skip No binaries or modules to extract y.war ok 130 # skip No binaries or modules to extract y.war ok 131 # skip No binaries or modules to extract y.war ok 132 # skip No binaries or modules to extract y.war ok 133 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 134 - Archive type is_tgz recognized properly ok 135 - extract() for 'y.tgz' reports success (PP: 0 Bin: 1) ok 136 - No errors capturing buffers ok 137 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 138 - Found correct output file 'y/z' ok 139 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 140 - Extract dir found ok 141 - Extract dir exists ok 142 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 143 - Output file successfully removed ok 144 - rmtree gave no error ok 145 - Extract dir successfully removed ok 146 # skip No buffers available ok 147 # skip No buffers available ok 148 # skip No buffers available ok 149 # skip No buffers available ok 150 # skip No buffers available ok 151 # skip No buffers available ok 152 # skip No buffers available ok 153 # skip No buffers available ok 154 - Output file successfully removed ok 155 # skip No extract path captured, can't remove paths ok 156 # skip No extract path captured, can't remove paths ok 157 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 158 - Archive type is_tgz recognized properly ok 159 - extract() for 'y.tgz' reports success (PP: 0 Bin: 1) ok 160 - No errors capturing buffers ok 161 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 162 - Found correct output file 'y/z' ok 163 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 164 - Extract dir found ok 165 - Extract dir exists ok 166 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 167 - Output file successfully removed ok 168 - rmtree gave no error ok 169 - Extract dir successfully removed ok 170 # skip No buffers available ok 171 # skip No buffers available ok 172 # skip No buffers available ok 173 # skip No buffers available ok 174 # skip No buffers available ok 175 # skip No buffers available ok 176 # skip No buffers available ok 177 # skip No buffers available ok 178 - Output file successfully removed ok 179 # skip No extract path captured, can't remove paths ok 180 # skip No extract path captured, can't remove paths ok 181 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 182 - Archive type is_zip recognized properly ok 183 # skip No binaries or modules to extract x.par ok 184 # skip No binaries or modules to extract x.par ok 185 # skip No binaries or modules to extract x.par ok 186 # skip No binaries or modules to extract x.par ok 187 # skip No binaries or modules to extract x.par ok 188 # skip No binaries or modules to extract x.par ok 189 # skip No binaries or modules to extract x.par ok 190 # skip No binaries or modules to extract x.par ok 191 # skip No binaries or modules to extract x.par ok 192 # skip No binaries or modules to extract x.par ok 193 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 194 - Archive type is_tar recognized properly ok 195 - extract() for 'y.tar' reports success (PP: 0 Bin: 1) ok 196 - No errors capturing buffers ok 197 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 198 - Found correct output file 'y/z' ok 199 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 200 - Extract dir found ok 201 - Extract dir exists ok 202 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 203 - Output file successfully removed ok 204 - rmtree gave no error ok 205 - Extract dir successfully removed ok 206 # skip No buffers available ok 207 # skip No buffers available ok 208 # skip No buffers available ok 209 # skip No buffers available ok 210 # skip No buffers available ok 211 # skip No buffers available ok 212 # skip No buffers available ok 213 # skip No buffers available ok 214 - Output file successfully removed ok 215 # skip No extract path captured, can't remove paths ok 216 # skip No extract path captured, can't remove paths ok 217 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 218 - Archive type is_tar recognized properly ok 219 - extract() for 'y.tar' reports success (PP: 0 Bin: 1) ok 220 - No errors capturing buffers ok 221 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 222 - Found correct output file 'y/z' ok 223 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 224 - Extract dir found ok 225 - Extract dir exists ok 226 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 227 - Output file successfully removed ok 228 - rmtree gave no error ok 229 - Extract dir successfully removed ok 230 # skip No buffers available ok 231 # skip No buffers available ok 232 # skip No buffers available ok 233 # skip No buffers available ok 234 # skip No buffers available ok 235 # skip No buffers available ok 236 # skip No buffers available ok 237 # skip No buffers available ok 238 - Output file successfully removed ok 239 # skip No extract path captured, can't remove paths ok 240 # skip No extract path captured, can't remove paths ok 241 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 242 - Archive type is_txz recognized properly ok 243 - extract() for 'x.txz' reports success (PP: 0 Bin: 1) ok 244 - No errors capturing buffers ok 245 - Found correct number of output files (a) ok 246 - Found correct output file 'a' ok 247 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 248 - Extract dir found ok 249 - Extract dir exists ok 250 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 251 - Output file successfully removed ok 252 - rmtree gave no error ok 253 - Extract dir successfully removed ok 254 # skip No buffers available ok 255 # skip No buffers available ok 256 # skip No buffers available ok 257 # skip No buffers available ok 258 # skip No buffers available ok 259 # skip No buffers available ok 260 # skip No buffers available ok 261 # skip No buffers available ok 262 - Output file successfully removed ok 263 # skip No extract path captured, can't remove paths ok 264 # skip No extract path captured, can't remove paths ok 265 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 266 - Archive type is_txz recognized properly ok 267 - extract() for 'x.txz' reports success (PP: 0 Bin: 1) ok 268 - No errors capturing buffers ok 269 - Found correct number of output files (a) ok 270 - Found correct output file 'a' ok 271 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 272 - Extract dir found ok 273 - Extract dir exists ok 274 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 275 - Output file successfully removed ok 276 - rmtree gave no error ok 277 - Extract dir successfully removed ok 278 # skip No buffers available ok 279 # skip No buffers available ok 280 # skip No buffers available ok 281 # skip No buffers available ok 282 # skip No buffers available ok 283 # skip No buffers available ok 284 # skip No buffers available ok 285 # skip No buffers available ok 286 - Output file successfully removed ok 287 # skip No extract path captured, can't remove paths ok 288 # skip No extract path captured, can't remove paths ok 289 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 290 - Archive type is_zip recognized properly ok 291 # skip No binaries or modules to extract x.zip ok 292 # skip No binaries or modules to extract x.zip ok 293 # skip No binaries or modules to extract x.zip ok 294 # skip No binaries or modules to extract x.zip ok 295 # skip No binaries or modules to extract x.zip ok 296 # skip No binaries or modules to extract x.zip ok 297 # skip No binaries or modules to extract x.zip ok 298 # skip No binaries or modules to extract x.zip ok 299 # skip No binaries or modules to extract x.zip ok 300 # skip No binaries or modules to extract x.zip ok 301 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 302 - Archive type is_txz recognized properly ok 303 - extract() for 'x.tar.xz' reports success (PP: 0 Bin: 1) ok 304 - No errors capturing buffers ok 305 - Found correct number of output files (a) ok 306 - Found correct output file 'a' ok 307 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 308 - Extract dir found ok 309 - Extract dir exists ok 310 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 311 - Output file successfully removed ok 312 - rmtree gave no error ok 313 - Extract dir successfully removed ok 314 # skip No buffers available ok 315 # skip No buffers available ok 316 # skip No buffers available ok 317 # skip No buffers available ok 318 # skip No buffers available ok 319 # skip No buffers available ok 320 # skip No buffers available ok 321 # skip No buffers available ok 322 - Output file successfully removed ok 323 # skip No extract path captured, can't remove paths ok 324 # skip No extract path captured, can't remove paths ok 325 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 326 - Archive type is_txz recognized properly ok 327 - extract() for 'x.tar.xz' reports success (PP: 0 Bin: 1) ok 328 - No errors capturing buffers ok 329 - Found correct number of output files (a) ok 330 - Found correct output file 'a' ok 331 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 332 - Extract dir found ok 333 - Extract dir exists ok 334 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 335 - Output file successfully removed ok 336 - rmtree gave no error ok 337 - Extract dir successfully removed ok 338 # skip No buffers available ok 339 # skip No buffers available ok 340 # skip No buffers available ok 341 # skip No buffers available ok 342 # skip No buffers available ok 343 # skip No buffers available ok 344 # skip No buffers available ok 345 # skip No buffers available ok 346 - Output file successfully removed ok 347 # skip No extract path captured, can't remove paths ok 348 # skip No extract path captured, can't remove paths ok 349 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 350 - Archive type is_zip recognized properly ok 351 # skip No binaries or modules to extract x.ear ok 352 # skip No binaries or modules to extract x.ear ok 353 # skip No binaries or modules to extract x.ear ok 354 # skip No binaries or modules to extract x.ear ok 355 # skip No binaries or modules to extract x.ear ok 356 # skip No binaries or modules to extract x.ear ok 357 # skip No binaries or modules to extract x.ear ok 358 # skip No binaries or modules to extract x.ear ok 359 # skip No binaries or modules to extract x.ear ok 360 # skip No binaries or modules to extract x.ear ok 361 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 362 - Archive type is_txz recognized properly ok 363 - extract() for 'y.txz' reports success (PP: 0 Bin: 1) ok 364 - No errors capturing buffers ok 365 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 366 - Found correct output file 'y/z' ok 367 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 368 - Extract dir found ok 369 - Extract dir exists ok 370 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 371 - Output file successfully removed ok 372 - rmtree gave no error ok 373 - Extract dir successfully removed ok 374 # skip No buffers available ok 375 # skip No buffers available ok 376 # skip No buffers available ok 377 # skip No buffers available ok 378 # skip No buffers available ok 379 # skip No buffers available ok 380 # skip No buffers available ok 381 # skip No buffers available ok 382 - Output file successfully removed ok 383 # skip No extract path captured, can't remove paths ok 384 # skip No extract path captured, can't remove paths ok 385 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 386 - Archive type is_txz recognized properly ok 387 - extract() for 'y.txz' reports success (PP: 0 Bin: 1) ok 388 - No errors capturing buffers ok 389 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 390 - Found correct output file 'y/z' ok 391 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 392 - Extract dir found ok 393 - Extract dir exists ok 394 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 395 - Output file successfully removed ok 396 - rmtree gave no error ok 397 - Extract dir successfully removed ok 398 # skip No buffers available ok 399 # skip No buffers available ok 400 # skip No buffers available ok 401 # skip No buffers available ok 402 # skip No buffers available ok 403 # skip No buffers available ok 404 # skip No buffers available ok 405 # skip No buffers available ok 406 - Output file successfully removed ok 407 # skip No extract path captured, can't remove paths ok 408 # skip No extract path captured, can't remove paths ok 409 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 410 - Archive type is_tar recognized properly ok 411 - extract() for 'x.tar' reports success (PP: 0 Bin: 1) ok 412 - No errors capturing buffers ok 413 - Found correct number of output files (a) ok 414 - Found correct output file 'a' ok 415 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 416 - Extract dir found ok 417 - Extract dir exists ok 418 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 419 - Output file successfully removed ok 420 - rmtree gave no error ok 421 - Extract dir successfully removed ok 422 # skip No buffers available ok 423 # skip No buffers available ok 424 # skip No buffers available ok 425 # skip No buffers available ok 426 # skip No buffers available ok 427 # skip No buffers available ok 428 # skip No buffers available ok 429 # skip No buffers available ok 430 - Output file successfully removed ok 431 # skip No extract path captured, can't remove paths ok 432 # skip No extract path captured, can't remove paths ok 433 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 434 - Archive type is_tar recognized properly ok 435 - extract() for 'x.tar' reports success (PP: 0 Bin: 1) ok 436 - No errors capturing buffers ok 437 - Found correct number of output files (a) ok 438 - Found correct output file 'a' ok 439 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 440 - Extract dir found ok 441 - Extract dir exists ok 442 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 443 - Output file successfully removed ok 444 - rmtree gave no error ok 445 - Extract dir successfully removed ok 446 # skip No buffers available ok 447 # skip No buffers available ok 448 # skip No buffers available ok 449 # skip No buffers available ok 450 # skip No buffers available ok 451 # skip No buffers available ok 452 # skip No buffers available ok 453 # skip No buffers available ok 454 - Output file successfully removed ok 455 # skip No extract path captured, can't remove paths ok 456 # skip No extract path captured, can't remove paths ok 457 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 458 - Archive type is_xz recognized properly ok 459 - extract() for 'x.xz' reports success (PP: 0 Bin: 1) ok 460 - No errors capturing buffers ok 461 - Found correct number of output files (a) ok 462 - Found correct output file 'a' ok 463 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 464 - Extract dir found ok 465 - Extract dir exists ok 466 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 467 - Output file successfully removed ok 468 - rmtree gave no error ok 469 - Extract dir successfully removed ok 470 # skip No buffers available ok 471 # skip No buffers available ok 472 # skip No buffers available ok 473 # skip No buffers available ok 474 # skip No buffers available ok 475 # skip No buffers available ok 476 # skip No buffers available ok 477 # skip No buffers available ok 478 - Output file successfully removed ok 479 - rmtree gave no error ok 480 - Extract dir successfully removed ok 481 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 482 - Archive type is_txz recognized properly ok 483 - extract() for 'y.tar.xz' reports success (PP: 0 Bin: 1) ok 484 - No errors capturing buffers ok 485 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 486 - Found correct output file 'y/z' ok 487 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 488 - Extract dir found ok 489 - Extract dir exists ok 490 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 491 - Output file successfully removed ok 492 - rmtree gave no error ok 493 - Extract dir successfully removed ok 494 # skip No buffers available ok 495 # skip No buffers available ok 496 # skip No buffers available ok 497 # skip No buffers available ok 498 # skip No buffers available ok 499 # skip No buffers available ok 500 # skip No buffers available ok 501 # skip No buffers available ok 502 - Output file successfully removed ok 503 # skip No extract path captured, can't remove paths ok 504 # skip No extract path captured, can't remove paths ok 505 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 506 - Archive type is_txz recognized properly ok 507 - extract() for 'y.tar.xz' reports success (PP: 0 Bin: 1) ok 508 - No errors capturing buffers ok 509 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 510 - Found correct output file 'y/z' ok 511 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 512 - Extract dir found ok 513 - Extract dir exists ok 514 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 515 - Output file successfully removed ok 516 - rmtree gave no error ok 517 - Extract dir successfully removed ok 518 # skip No buffers available ok 519 # skip No buffers available ok 520 # skip No buffers available ok 521 # skip No buffers available ok 522 # skip No buffers available ok 523 # skip No buffers available ok 524 # skip No buffers available ok 525 # skip No buffers available ok 526 - Output file successfully removed ok 527 # skip No extract path captured, can't remove paths ok 528 # skip No extract path captured, can't remove paths ok 529 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 530 - Archive type is_zip recognized properly ok 531 # skip No binaries or modules to extract y.ear ok 532 # skip No binaries or modules to extract y.ear ok 533 # skip No binaries or modules to extract y.ear ok 534 # skip No binaries or modules to extract y.ear ok 535 # skip No binaries or modules to extract y.ear ok 536 # skip No binaries or modules to extract y.ear ok 537 # skip No binaries or modules to extract y.ear ok 538 # skip No binaries or modules to extract y.ear ok 539 # skip No binaries or modules to extract y.ear ok 540 # skip No binaries or modules to extract y.ear ok 541 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 542 - Archive type is_zip recognized properly ok 543 # skip No binaries or modules to extract y.zip ok 544 # skip No binaries or modules to extract y.zip ok 545 # skip No binaries or modules to extract y.zip ok 546 # skip No binaries or modules to extract y.zip ok 547 # skip No binaries or modules to extract y.zip ok 548 # skip No binaries or modules to extract y.zip ok 549 # skip No binaries or modules to extract y.zip ok 550 # skip No binaries or modules to extract y.zip ok 551 # skip No binaries or modules to extract y.zip ok 552 # skip No binaries or modules to extract y.zip ok 553 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 554 - Archive type is_lzma recognized properly ok 555 - extract() for 'x.lzma' reports success (PP: 0 Bin: 1) ok 556 - No errors capturing buffers ok 557 - Found correct number of output files (a) ok 558 - Found correct output file 'a' ok 559 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 560 - Extract dir found ok 561 - Extract dir exists ok 562 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 563 - Output file successfully removed ok 564 - rmtree gave no error ok 565 - Extract dir successfully removed ok 566 # skip No buffers available ok 567 # skip No buffers available ok 568 # skip No buffers available ok 569 # skip No buffers available ok 570 # skip No buffers available ok 571 # skip No buffers available ok 572 # skip No buffers available ok 573 # skip No buffers available ok 574 - Output file successfully removed ok 575 - rmtree gave no error ok 576 - Extract dir successfully removed ok 577 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 578 - Archive type is_tbz recognized properly ok 579 - extract() for 'y.tar.bz2' reports success (PP: 0 Bin: 1) ok 580 - No errors capturing buffers ok 581 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 582 - Found correct output file 'y/z' ok 583 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 584 - Extract dir found ok 585 - Extract dir exists ok 586 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 587 - Output file successfully removed ok 588 - rmtree gave no error ok 589 - Extract dir successfully removed ok 590 # skip No buffers available ok 591 # skip No buffers available ok 592 # skip No buffers available ok 593 # skip No buffers available ok 594 # skip No buffers available ok 595 # skip No buffers available ok 596 # skip No buffers available ok 597 # skip No buffers available ok 598 - Output file successfully removed ok 599 # skip No extract path captured, can't remove paths ok 600 # skip No extract path captured, can't remove paths ok 601 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 602 - Archive type is_tbz recognized properly ok 603 - extract() for 'y.tar.bz2' reports success (PP: 0 Bin: 1) ok 604 - No errors capturing buffers ok 605 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 606 - Found correct output file 'y/z' ok 607 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 608 - Extract dir found ok 609 - Extract dir exists ok 610 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 611 - Output file successfully removed ok 612 - rmtree gave no error ok 613 - Extract dir successfully removed ok 614 # skip No buffers available ok 615 # skip No buffers available ok 616 # skip No buffers available ok 617 # skip No buffers available ok 618 # skip No buffers available ok 619 # skip No buffers available ok 620 # skip No buffers available ok 621 # skip No buffers available ok 622 - Output file successfully removed ok 623 # skip No extract path captured, can't remove paths ok 624 # skip No extract path captured, can't remove paths ok 625 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 626 - Archive type is_bz2 recognized properly ok 627 - extract() for 'x.bz2' reports success (PP: 0 Bin: 1) ok 628 - No errors capturing buffers ok 629 - Found correct number of output files (a) ok 630 - Found correct output file 'a' ok 631 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 632 - Extract dir found ok 633 - Extract dir exists ok 634 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 635 - Output file successfully removed ok 636 - rmtree gave no error ok 637 - Extract dir successfully removed ok 638 # skip No buffers available ok 639 # skip No buffers available ok 640 # skip No buffers available ok 641 # skip No buffers available ok 642 # skip No buffers available ok 643 # skip No buffers available ok 644 # skip No buffers available ok 645 # skip No buffers available ok 646 - Output file successfully removed ok 647 - rmtree gave no error ok 648 - Extract dir successfully removed ok 649 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 650 - Archive type is_tgz recognized properly ok 651 - extract() for 'y.tar.gz' reports success (PP: 0 Bin: 1) ok 652 - No errors capturing buffers ok 653 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 654 - Found correct output file 'y/z' ok 655 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 656 - Extract dir found ok 657 - Extract dir exists ok 658 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 659 - Output file successfully removed ok 660 - rmtree gave no error ok 661 - Extract dir successfully removed ok 662 # skip No buffers available ok 663 # skip No buffers available ok 664 # skip No buffers available ok 665 # skip No buffers available ok 666 # skip No buffers available ok 667 # skip No buffers available ok 668 # skip No buffers available ok 669 # skip No buffers available ok 670 - Output file successfully removed ok 671 # skip No extract path captured, can't remove paths ok 672 # skip No extract path captured, can't remove paths ok 673 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 674 - Archive type is_tgz recognized properly ok 675 - extract() for 'y.tar.gz' reports success (PP: 0 Bin: 1) ok 676 - No errors capturing buffers ok 677 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 678 - Found correct output file 'y/z' ok 679 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 680 - Extract dir found ok 681 - Extract dir exists ok 682 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 683 - Output file successfully removed ok 684 - rmtree gave no error ok 685 - Extract dir successfully removed ok 686 # skip No buffers available ok 687 # skip No buffers available ok 688 # skip No buffers available ok 689 # skip No buffers available ok 690 # skip No buffers available ok 691 # skip No buffers available ok 692 # skip No buffers available ok 693 # skip No buffers available ok 694 - Output file successfully removed ok 695 # skip No extract path captured, can't remove paths ok 696 # skip No extract path captured, can't remove paths ok 697 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 698 - Archive type is_zip recognized properly ok 699 # skip No binaries or modules to extract y.jar ok 700 # skip No binaries or modules to extract y.jar ok 701 # skip No binaries or modules to extract y.jar ok 702 # skip No binaries or modules to extract y.jar ok 703 # skip No binaries or modules to extract y.jar ok 704 # skip No binaries or modules to extract y.jar ok 705 # skip No binaries or modules to extract y.jar ok 706 # skip No binaries or modules to extract y.jar ok 707 # skip No binaries or modules to extract y.jar ok 708 # skip No binaries or modules to extract y.jar ok 709 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 710 - Archive type is_tbz recognized properly ok 711 - extract() for 'y.tbz' reports success (PP: 0 Bin: 1) ok 712 - No errors capturing buffers ok 713 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 714 - Found correct output file 'y/z' ok 715 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 716 - Extract dir found ok 717 - Extract dir exists ok 718 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 719 - Output file successfully removed ok 720 - rmtree gave no error ok 721 - Extract dir successfully removed ok 722 # skip No buffers available ok 723 # skip No buffers available ok 724 # skip No buffers available ok 725 # skip No buffers available ok 726 # skip No buffers available ok 727 # skip No buffers available ok 728 # skip No buffers available ok 729 # skip No buffers available ok 730 - Output file successfully removed ok 731 # skip No extract path captured, can't remove paths ok 732 # skip No extract path captured, can't remove paths ok 733 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 734 - Archive type is_tbz recognized properly ok 735 - extract() for 'y.tbz' reports success (PP: 0 Bin: 1) ok 736 - No errors capturing buffers ok 737 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 738 - Found correct output file 'y/z' ok 739 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 740 - Extract dir found ok 741 - Extract dir exists ok 742 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 743 - Output file successfully removed ok 744 - rmtree gave no error ok 745 - Extract dir successfully removed ok 746 # skip No buffers available ok 747 # skip No buffers available ok 748 # skip No buffers available ok 749 # skip No buffers available ok 750 # skip No buffers available ok 751 # skip No buffers available ok 752 # skip No buffers available ok 753 # skip No buffers available ok 754 - Output file successfully removed ok 755 # skip No extract path captured, can't remove paths ok 756 # skip No extract path captured, can't remove paths ok 757 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 758 - Archive type is_Z recognized properly ok 759 - extract() for 'x.Z' reports success (PP: 0 Bin: 1) ok 760 - No errors capturing buffers ok 761 - Found correct number of output files (a) ok 762 - Found correct output file 'a' ok 763 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 764 - Extract dir found ok 765 - Extract dir exists ok 766 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 767 - Output file successfully removed ok 768 - rmtree gave no error ok 769 - Extract dir successfully removed ok 770 # skip No buffers available ok 771 # skip No buffers available ok 772 # skip No buffers available ok 773 # skip No buffers available ok 774 # skip No buffers available ok 775 # skip No buffers available ok 776 # skip No buffers available ok 777 # skip No buffers available ok 778 - Output file successfully removed ok 779 - rmtree gave no error ok 780 - Extract dir successfully removed ok 781 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 782 - Archive type is_gz recognized properly ok 783 - extract() for 'x.gz' reports success (PP: 0 Bin: 1) ok 784 - No errors capturing buffers ok 785 - Found correct number of output files (a) ok 786 - Found correct output file 'a' ok 787 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 788 - Extract dir found ok 789 - Extract dir exists ok 790 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 791 - Output file successfully removed ok 792 - rmtree gave no error ok 793 - Extract dir successfully removed ok 794 # skip No buffers available ok 795 # skip No buffers available ok 796 # skip No buffers available ok 797 # skip No buffers available ok 798 # skip No buffers available ok 799 # skip No buffers available ok 800 # skip No buffers available ok 801 # skip No buffers available ok 802 - Output file successfully removed ok 803 - rmtree gave no error ok 804 - Extract dir successfully removed ok 805 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 806 - Archive type is_tgz recognized properly ok 807 - extract() for 'x.tar.gz' reports success (PP: 0 Bin: 1) ok 808 - No errors capturing buffers ok 809 - Found correct number of output files (a) ok 810 - Found correct output file 'a' ok 811 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 812 - Extract dir found ok 813 - Extract dir exists ok 814 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 815 - Output file successfully removed ok 816 - rmtree gave no error ok 817 - Extract dir successfully removed ok 818 # skip No buffers available ok 819 # skip No buffers available ok 820 # skip No buffers available ok 821 # skip No buffers available ok 822 # skip No buffers available ok 823 # skip No buffers available ok 824 # skip No buffers available ok 825 # skip No buffers available ok 826 - Output file successfully removed ok 827 # skip No extract path captured, can't remove paths ok 828 # skip No extract path captured, can't remove paths ok 829 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 830 - Archive type is_tgz recognized properly ok 831 - extract() for 'x.tar.gz' reports success (PP: 0 Bin: 1) ok 832 - No errors capturing buffers ok 833 - Found correct number of output files (a) ok 834 - Found correct output file 'a' ok 835 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 836 - Extract dir found ok 837 - Extract dir exists ok 838 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 839 - Output file successfully removed ok 840 - rmtree gave no error ok 841 - Extract dir successfully removed ok 842 # skip No buffers available ok 843 # skip No buffers available ok 844 # skip No buffers available ok 845 # skip No buffers available ok 846 # skip No buffers available ok 847 # skip No buffers available ok 848 # skip No buffers available ok 849 # skip No buffers available ok 850 - Output file successfully removed ok 851 # skip No extract path captured, can't remove paths ok 852 # skip No extract path captured, can't remove paths ok 853 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 854 - Archive type is_zip recognized properly ok 855 # skip No binaries or modules to extract x.jar ok 856 # skip No binaries or modules to extract x.jar ok 857 # skip No binaries or modules to extract x.jar ok 858 # skip No binaries or modules to extract x.jar ok 859 # skip No binaries or modules to extract x.jar ok 860 # skip No binaries or modules to extract x.jar ok 861 # skip No binaries or modules to extract x.jar ok 862 # skip No binaries or modules to extract x.jar ok 863 # skip No binaries or modules to extract x.jar ok 864 # skip No binaries or modules to extract x.jar ok 865 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 866 - Archive type is_zip recognized properly ok 867 - extract() for 'x.war' reports success (PP: 1 Bin: 0) ok 868 - No errors capturing buffers ok 869 - Found correct number of output files (a) ok 870 - Found correct output file 'a' ok 871 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 872 - Extract dir found ok 873 - Extract dir exists ok 874 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 875 - Output file successfully removed ok 876 - rmtree gave no error ok 877 - Extract dir successfully removed ok 878 - extract() for 'x.war' reports success (PP: 1 Bin: 0) ok 879 - No errors capturing buffers ok 880 - Found correct number of output files (a) ok 881 - Found correct output file 'a' ok 882 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 883 - Extract dir found ok 884 - Extract dir exists ok 885 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 886 - Output file successfully removed ok 887 - rmtree gave no error ok 888 - Extract dir successfully removed ok 889 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 890 - Archive type is_zip recognized properly ok 891 - extract() for 'y.par' reports success (PP: 1 Bin: 0) ok 892 - No errors capturing buffers ok 893 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 894 - Found correct output file 'y/z' ok 895 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 896 - Extract dir found ok 897 - Extract dir exists ok 898 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 899 - Output file successfully removed ok 900 - rmtree gave no error ok 901 - Extract dir successfully removed ok 902 - extract() for 'y.par' reports success (PP: 1 Bin: 0) ok 903 - No errors capturing buffers ok 904 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 905 - Found correct output file 'y/z' ok 906 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 907 - Extract dir found ok 908 - Extract dir exists ok 909 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 910 - Output file successfully removed ok 911 - rmtree gave no error ok 912 - Extract dir successfully removed ok 913 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 914 - Archive type is_tgz recognized properly ok 915 - extract() for 'x.tgz' reports success (PP: 1 Bin: 0) ok 916 - No errors capturing buffers ok 917 - Found correct number of output files (a) ok 918 - Found correct output file 'a' ok 919 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 920 - Extract dir found ok 921 - Extract dir exists ok 922 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 923 - Output file successfully removed ok 924 - rmtree gave no error ok 925 - Extract dir successfully removed ok 926 - extract() for 'x.tgz' reports success (PP: 1 Bin: 0) ok 927 - No errors capturing buffers ok 928 - Found correct number of output files (a) ok 929 - Found correct output file 'a' ok 930 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 931 - Extract dir found ok 932 - Extract dir exists ok 933 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 934 - Output file successfully removed ok 935 - rmtree gave no error ok 936 - Extract dir successfully removed ok 937 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 938 - Archive type is_tgz recognized properly ok 939 - extract() for 'x.tgz' reports success (PP: 1 Bin: 0) ok 940 - No errors capturing buffers ok 941 - Found correct number of output files (a) ok 942 - Found correct output file 'a' ok 943 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 944 - Extract dir found ok 945 - Extract dir exists ok 946 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 947 - Output file successfully removed ok 948 - rmtree gave no error ok 949 - Extract dir successfully removed ok 950 - extract() for 'x.tgz' reports success (PP: 1 Bin: 0) ok 951 - No errors capturing buffers ok 952 - Found correct number of output files (a) ok 953 - Found correct output file 'a' ok 954 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 955 - Extract dir found ok 956 - Extract dir exists ok 957 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 958 - Output file successfully removed ok 959 - rmtree gave no error ok 960 - Extract dir successfully removed ok 961 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 962 - Archive type is_zip recognized properly ok 963 - extract() for 'double_dir.zip' reports success (PP: 1 Bin: 0) ok 964 - No errors capturing buffers ok 965 - Found correct number of output files (x/y/zLISTSEP_FLAGx/w) ok 966 - Found correct output file 'x/w' ok 967 - Output file '/build/libarchive-extract-perl-0.80/t/out/x/w' exists ok 968 - Extract dir found ok 969 - Extract dir exists ok 970 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/x' ok 971 - Output file successfully removed ok 972 - rmtree gave no error ok 973 - Extract dir successfully removed ok 974 - extract() for 'double_dir.zip' reports success (PP: 1 Bin: 0) ok 975 - No errors capturing buffers ok 976 - Found correct number of output files (x/y/zLISTSEP_FLAGx/w) ok 977 - Found correct output file 'x/w' ok 978 - Output file '/build/libarchive-extract-perl-0.80/t/out/x/w' exists ok 979 - Extract dir found ok 980 - Extract dir exists ok 981 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/x' ok 982 - Output file successfully removed ok 983 - rmtree gave no error ok 984 - Extract dir successfully removed ok 985 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 986 - Archive type is_zip recognized properly ok 987 - extract() for 'y.war' reports success (PP: 1 Bin: 0) ok 988 - No errors capturing buffers ok 989 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 990 - Found correct output file 'y/z' ok 991 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 992 - Extract dir found ok 993 - Extract dir exists ok 994 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 995 - Output file successfully removed ok 996 - rmtree gave no error ok 997 - Extract dir successfully removed ok 998 - extract() for 'y.war' reports success (PP: 1 Bin: 0) ok 999 - No errors capturing buffers ok 1000 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1001 - Found correct output file 'y/z' ok 1002 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1003 - Extract dir found ok 1004 - Extract dir exists ok 1005 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1006 - Output file successfully removed ok 1007 - rmtree gave no error ok 1008 - Extract dir successfully removed ok 1009 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1010 - Archive type is_tgz recognized properly ok 1011 - extract() for 'y.tgz' reports success (PP: 1 Bin: 0) ok 1012 - No errors capturing buffers ok 1013 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1014 - Found correct output file 'y/z' ok 1015 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1016 - Extract dir found ok 1017 - Extract dir exists ok 1018 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1019 - Output file successfully removed ok 1020 - rmtree gave no error ok 1021 - Extract dir successfully removed ok 1022 - extract() for 'y.tgz' reports success (PP: 1 Bin: 0) ok 1023 - No errors capturing buffers ok 1024 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1025 - Found correct output file 'y/z' ok 1026 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1027 - Extract dir found ok 1028 - Extract dir exists ok 1029 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1030 - Output file successfully removed ok 1031 - rmtree gave no error ok 1032 - Extract dir successfully removed ok 1033 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1034 - Archive type is_tgz recognized properly ok 1035 - extract() for 'y.tgz' reports success (PP: 1 Bin: 0) ok 1036 - No errors capturing buffers ok 1037 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1038 - Found correct output file 'y/z' ok 1039 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1040 - Extract dir found ok 1041 - Extract dir exists ok 1042 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1043 - Output file successfully removed ok 1044 - rmtree gave no error ok 1045 - Extract dir successfully removed ok 1046 - extract() for 'y.tgz' reports success (PP: 1 Bin: 0) ok 1047 - No errors capturing buffers ok 1048 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1049 - Found correct output file 'y/z' ok 1050 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1051 - Extract dir found ok 1052 - Extract dir exists ok 1053 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1054 - Output file successfully removed ok 1055 - rmtree gave no error ok 1056 - Extract dir successfully removed ok 1057 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1058 - Archive type is_zip recognized properly ok 1059 - extract() for 'x.par' reports success (PP: 1 Bin: 0) ok 1060 - No errors capturing buffers ok 1061 - Found correct number of output files (a) ok 1062 - Found correct output file 'a' ok 1063 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1064 - Extract dir found ok 1065 - Extract dir exists ok 1066 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1067 - Output file successfully removed ok 1068 - rmtree gave no error ok 1069 - Extract dir successfully removed ok 1070 - extract() for 'x.par' reports success (PP: 1 Bin: 0) ok 1071 - No errors capturing buffers ok 1072 - Found correct number of output files (a) ok 1073 - Found correct output file 'a' ok 1074 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1075 - Extract dir found ok 1076 - Extract dir exists ok 1077 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1078 - Output file successfully removed ok 1079 - rmtree gave no error ok 1080 - Extract dir successfully removed ok 1081 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1082 - Archive type is_tar recognized properly ok 1083 - extract() for 'y.tar' reports success (PP: 1 Bin: 0) ok 1084 - No errors capturing buffers ok 1085 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1086 - Found correct output file 'y/z' ok 1087 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1088 - Extract dir found ok 1089 - Extract dir exists ok 1090 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1091 - Output file successfully removed ok 1092 - rmtree gave no error ok 1093 - Extract dir successfully removed ok 1094 - extract() for 'y.tar' reports success (PP: 1 Bin: 0) ok 1095 - No errors capturing buffers ok 1096 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1097 - Found correct output file 'y/z' ok 1098 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1099 - Extract dir found ok 1100 - Extract dir exists ok 1101 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1102 - Output file successfully removed ok 1103 - rmtree gave no error ok 1104 - Extract dir successfully removed ok 1105 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1106 - Archive type is_tar recognized properly ok 1107 - extract() for 'y.tar' reports success (PP: 1 Bin: 0) ok 1108 - No errors capturing buffers ok 1109 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1110 - Found correct output file 'y/z' ok 1111 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1112 - Extract dir found ok 1113 - Extract dir exists ok 1114 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1115 - Output file successfully removed ok 1116 - rmtree gave no error ok 1117 - Extract dir successfully removed ok 1118 - extract() for 'y.tar' reports success (PP: 1 Bin: 0) ok 1119 - No errors capturing buffers ok 1120 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1121 - Found correct output file 'y/z' ok 1122 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1123 - Extract dir found ok 1124 - Extract dir exists ok 1125 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1126 - Output file successfully removed ok 1127 - rmtree gave no error ok 1128 - Extract dir successfully removed ok 1129 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1130 - Archive type is_txz recognized properly ok 1131 # skip No binaries or modules to extract x.txz ok 1132 # skip No binaries or modules to extract x.txz ok 1133 # skip No binaries or modules to extract x.txz ok 1134 # skip No binaries or modules to extract x.txz ok 1135 # skip No binaries or modules to extract x.txz ok 1136 # skip No binaries or modules to extract x.txz ok 1137 # skip No binaries or modules to extract x.txz ok 1138 # skip No binaries or modules to extract x.txz ok 1139 # skip No binaries or modules to extract x.txz ok 1140 # skip No binaries or modules to extract x.txz ok 1141 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1142 - Archive type is_txz recognized properly ok 1143 # skip No binaries or modules to extract x.txz ok 1144 # skip No binaries or modules to extract x.txz ok 1145 # skip No binaries or modules to extract x.txz ok 1146 # skip No binaries or modules to extract x.txz ok 1147 # skip No binaries or modules to extract x.txz ok 1148 # skip No binaries or modules to extract x.txz ok 1149 # skip No binaries or modules to extract x.txz ok 1150 # skip No binaries or modules to extract x.txz ok 1151 # skip No binaries or modules to extract x.txz ok 1152 # skip No binaries or modules to extract x.txz ok 1153 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1154 - Archive type is_zip recognized properly ok 1155 - extract() for 'x.zip' reports success (PP: 1 Bin: 0) ok 1156 - No errors capturing buffers ok 1157 - Found correct number of output files (a) ok 1158 - Found correct output file 'a' ok 1159 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1160 - Extract dir found ok 1161 - Extract dir exists ok 1162 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1163 - Output file successfully removed ok 1164 - rmtree gave no error ok 1165 - Extract dir successfully removed ok 1166 - extract() for 'x.zip' reports success (PP: 1 Bin: 0) ok 1167 - No errors capturing buffers ok 1168 - Found correct number of output files (a) ok 1169 - Found correct output file 'a' ok 1170 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1171 - Extract dir found ok 1172 - Extract dir exists ok 1173 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1174 - Output file successfully removed ok 1175 - rmtree gave no error ok 1176 - Extract dir successfully removed ok 1177 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1178 - Archive type is_txz recognized properly ok 1179 # skip No binaries or modules to extract x.tar.xz ok 1180 # skip No binaries or modules to extract x.tar.xz ok 1181 # skip No binaries or modules to extract x.tar.xz ok 1182 # skip No binaries or modules to extract x.tar.xz ok 1183 # skip No binaries or modules to extract x.tar.xz ok 1184 # skip No binaries or modules to extract x.tar.xz ok 1185 # skip No binaries or modules to extract x.tar.xz ok 1186 # skip No binaries or modules to extract x.tar.xz ok 1187 # skip No binaries or modules to extract x.tar.xz ok 1188 # skip No binaries or modules to extract x.tar.xz ok 1189 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1190 - Archive type is_txz recognized properly ok 1191 # skip No binaries or modules to extract x.tar.xz ok 1192 # skip No binaries or modules to extract x.tar.xz ok 1193 # skip No binaries or modules to extract x.tar.xz ok 1194 # skip No binaries or modules to extract x.tar.xz ok 1195 # skip No binaries or modules to extract x.tar.xz ok 1196 # skip No binaries or modules to extract x.tar.xz ok 1197 # skip No binaries or modules to extract x.tar.xz ok 1198 # skip No binaries or modules to extract x.tar.xz ok 1199 # skip No binaries or modules to extract x.tar.xz ok 1200 # skip No binaries or modules to extract x.tar.xz ok 1201 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1202 - Archive type is_zip recognized properly ok 1203 - extract() for 'x.ear' reports success (PP: 1 Bin: 0) ok 1204 - No errors capturing buffers ok 1205 - Found correct number of output files (a) ok 1206 - Found correct output file 'a' ok 1207 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1208 - Extract dir found ok 1209 - Extract dir exists ok 1210 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1211 - Output file successfully removed ok 1212 - rmtree gave no error ok 1213 - Extract dir successfully removed ok 1214 - extract() for 'x.ear' reports success (PP: 1 Bin: 0) ok 1215 - No errors capturing buffers ok 1216 - Found correct number of output files (a) ok 1217 - Found correct output file 'a' ok 1218 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1219 - Extract dir found ok 1220 - Extract dir exists ok 1221 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1222 - Output file successfully removed ok 1223 - rmtree gave no error ok 1224 - Extract dir successfully removed ok 1225 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1226 - Archive type is_txz recognized properly ok 1227 # skip No binaries or modules to extract y.txz ok 1228 # skip No binaries or modules to extract y.txz ok 1229 # skip No binaries or modules to extract y.txz ok 1230 # skip No binaries or modules to extract y.txz ok 1231 # skip No binaries or modules to extract y.txz ok 1232 # skip No binaries or modules to extract y.txz ok 1233 # skip No binaries or modules to extract y.txz ok 1234 # skip No binaries or modules to extract y.txz ok 1235 # skip No binaries or modules to extract y.txz ok 1236 # skip No binaries or modules to extract y.txz ok 1237 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1238 - Archive type is_txz recognized properly ok 1239 # skip No binaries or modules to extract y.txz ok 1240 # skip No binaries or modules to extract y.txz ok 1241 # skip No binaries or modules to extract y.txz ok 1242 # skip No binaries or modules to extract y.txz ok 1243 # skip No binaries or modules to extract y.txz ok 1244 # skip No binaries or modules to extract y.txz ok 1245 # skip No binaries or modules to extract y.txz ok 1246 # skip No binaries or modules to extract y.txz ok 1247 # skip No binaries or modules to extract y.txz ok 1248 # skip No binaries or modules to extract y.txz ok 1249 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1250 - Archive type is_tar recognized properly ok 1251 - extract() for 'x.tar' reports success (PP: 1 Bin: 0) ok 1252 - No errors capturing buffers ok 1253 - Found correct number of output files (a) ok 1254 - Found correct output file 'a' ok 1255 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1256 - Extract dir found ok 1257 - Extract dir exists ok 1258 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1259 - Output file successfully removed ok 1260 - rmtree gave no error ok 1261 - Extract dir successfully removed ok 1262 - extract() for 'x.tar' reports success (PP: 1 Bin: 0) ok 1263 - No errors capturing buffers ok 1264 - Found correct number of output files (a) ok 1265 - Found correct output file 'a' ok 1266 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1267 - Extract dir found ok 1268 - Extract dir exists ok 1269 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1270 - Output file successfully removed ok 1271 - rmtree gave no error ok 1272 - Extract dir successfully removed ok 1273 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1274 - Archive type is_tar recognized properly ok 1275 - extract() for 'x.tar' reports success (PP: 1 Bin: 0) ok 1276 - No errors capturing buffers ok 1277 - Found correct number of output files (a) ok 1278 - Found correct output file 'a' ok 1279 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1280 - Extract dir found ok 1281 - Extract dir exists ok 1282 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1283 - Output file successfully removed ok 1284 - rmtree gave no error ok 1285 - Extract dir successfully removed ok 1286 - extract() for 'x.tar' reports success (PP: 1 Bin: 0) ok 1287 - No errors capturing buffers ok 1288 - Found correct number of output files (a) ok 1289 - Found correct output file 'a' ok 1290 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1291 - Extract dir found ok 1292 - Extract dir exists ok 1293 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1294 - Output file successfully removed ok 1295 - rmtree gave no error ok 1296 - Extract dir successfully removed ok 1297 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1298 - Archive type is_xz recognized properly ok 1299 # skip No binaries or modules to extract x.xz ok 1300 # skip No binaries or modules to extract x.xz ok 1301 # skip No binaries or modules to extract x.xz ok 1302 # skip No binaries or modules to extract x.xz ok 1303 # skip No binaries or modules to extract x.xz ok 1304 # skip No binaries or modules to extract x.xz ok 1305 # skip No binaries or modules to extract x.xz ok 1306 # skip No binaries or modules to extract x.xz ok 1307 # skip No binaries or modules to extract x.xz ok 1308 # skip No binaries or modules to extract x.xz ok 1309 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1310 - Archive type is_txz recognized properly ok 1311 # skip No binaries or modules to extract y.tar.xz ok 1312 # skip No binaries or modules to extract y.tar.xz ok 1313 # skip No binaries or modules to extract y.tar.xz ok 1314 # skip No binaries or modules to extract y.tar.xz ok 1315 # skip No binaries or modules to extract y.tar.xz ok 1316 # skip No binaries or modules to extract y.tar.xz ok 1317 # skip No binaries or modules to extract y.tar.xz ok 1318 # skip No binaries or modules to extract y.tar.xz ok 1319 # skip No binaries or modules to extract y.tar.xz ok 1320 # skip No binaries or modules to extract y.tar.xz ok 1321 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1322 - Archive type is_txz recognized properly ok 1323 # skip No binaries or modules to extract y.tar.xz ok 1324 # skip No binaries or modules to extract y.tar.xz ok 1325 # skip No binaries or modules to extract y.tar.xz ok 1326 # skip No binaries or modules to extract y.tar.xz ok 1327 # skip No binaries or modules to extract y.tar.xz ok 1328 # skip No binaries or modules to extract y.tar.xz ok 1329 # skip No binaries or modules to extract y.tar.xz ok 1330 # skip No binaries or modules to extract y.tar.xz ok 1331 # skip No binaries or modules to extract y.tar.xz ok 1332 # skip No binaries or modules to extract y.tar.xz ok 1333 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1334 - Archive type is_zip recognized properly ok 1335 - extract() for 'y.ear' reports success (PP: 1 Bin: 0) ok 1336 - No errors capturing buffers ok 1337 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1338 - Found correct output file 'y/z' ok 1339 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1340 - Extract dir found ok 1341 - Extract dir exists ok 1342 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1343 - Output file successfully removed ok 1344 - rmtree gave no error ok 1345 - Extract dir successfully removed ok 1346 - extract() for 'y.ear' reports success (PP: 1 Bin: 0) ok 1347 - No errors capturing buffers ok 1348 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1349 - Found correct output file 'y/z' ok 1350 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1351 - Extract dir found ok 1352 - Extract dir exists ok 1353 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1354 - Output file successfully removed ok 1355 - rmtree gave no error ok 1356 - Extract dir successfully removed ok 1357 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1358 - Archive type is_zip recognized properly ok 1359 - extract() for 'y.zip' reports success (PP: 1 Bin: 0) ok 1360 - No errors capturing buffers ok 1361 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1362 - Found correct output file 'y/z' ok 1363 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1364 - Extract dir found ok 1365 - Extract dir exists ok 1366 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1367 - Output file successfully removed ok 1368 - rmtree gave no error ok 1369 - Extract dir successfully removed ok 1370 - extract() for 'y.zip' reports success (PP: 1 Bin: 0) ok 1371 - No errors capturing buffers ok 1372 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1373 - Found correct output file 'y/z' ok 1374 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1375 - Extract dir found ok 1376 - Extract dir exists ok 1377 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1378 - Output file successfully removed ok 1379 - rmtree gave no error ok 1380 - Extract dir successfully removed ok 1381 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1382 - Archive type is_lzma recognized properly ok 1383 # skip No binaries or modules to extract x.lzma ok 1384 # skip No binaries or modules to extract x.lzma ok 1385 # skip No binaries or modules to extract x.lzma ok 1386 # skip No binaries or modules to extract x.lzma ok 1387 # skip No binaries or modules to extract x.lzma ok 1388 # skip No binaries or modules to extract x.lzma ok 1389 # skip No binaries or modules to extract x.lzma ok 1390 # skip No binaries or modules to extract x.lzma ok 1391 # skip No binaries or modules to extract x.lzma ok 1392 # skip No binaries or modules to extract x.lzma ok 1393 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1394 - Archive type is_tbz recognized properly ok 1395 - extract() for 'y.tar.bz2' reports success (PP: 1 Bin: 0) ok 1396 - No errors capturing buffers ok 1397 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1398 - Found correct output file 'y/z' ok 1399 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1400 - Extract dir found ok 1401 - Extract dir exists ok 1402 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1403 - Output file successfully removed ok 1404 - rmtree gave no error ok 1405 - Extract dir successfully removed ok 1406 - extract() for 'y.tar.bz2' reports success (PP: 1 Bin: 0) ok 1407 - No errors capturing buffers ok 1408 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1409 - Found correct output file 'y/z' ok 1410 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1411 - Extract dir found ok 1412 - Extract dir exists ok 1413 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1414 - Output file successfully removed ok 1415 - rmtree gave no error ok 1416 - Extract dir successfully removed ok 1417 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1418 - Archive type is_tbz recognized properly ok 1419 - extract() for 'y.tar.bz2' reports success (PP: 1 Bin: 0) ok 1420 - No errors capturing buffers ok 1421 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1422 - Found correct output file 'y/z' ok 1423 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1424 - Extract dir found ok 1425 - Extract dir exists ok 1426 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1427 - Output file successfully removed ok 1428 - rmtree gave no error ok 1429 - Extract dir successfully removed ok 1430 - extract() for 'y.tar.bz2' reports success (PP: 1 Bin: 0) ok 1431 - No errors capturing buffers ok 1432 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1433 - Found correct output file 'y/z' ok 1434 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1435 - Extract dir found ok 1436 - Extract dir exists ok 1437 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1438 - Output file successfully removed ok 1439 - rmtree gave no error ok 1440 - Extract dir successfully removed ok 1441 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1442 - Archive type is_bz2 recognized properly ok 1443 - extract() for 'x.bz2' reports success (PP: 1 Bin: 0) ok 1444 - No errors capturing buffers ok 1445 - Found correct number of output files (a) ok 1446 - Found correct output file 'a' ok 1447 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1448 - Extract dir found ok 1449 - Extract dir exists ok 1450 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1451 - Output file successfully removed ok 1452 - rmtree gave no error ok 1453 - Extract dir successfully removed ok 1454 - extract() for 'x.bz2' reports success (PP: 1 Bin: 0) ok 1455 - No errors capturing buffers ok 1456 - Found correct number of output files (a) ok 1457 - Found correct output file 'a' ok 1458 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1459 - Extract dir found ok 1460 - Extract dir exists ok 1461 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1462 - Output file successfully removed ok 1463 - rmtree gave no error ok 1464 - Extract dir successfully removed ok 1465 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1466 - Archive type is_tgz recognized properly ok 1467 - extract() for 'y.tar.gz' reports success (PP: 1 Bin: 0) ok 1468 - No errors capturing buffers ok 1469 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1470 - Found correct output file 'y/z' ok 1471 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1472 - Extract dir found ok 1473 - Extract dir exists ok 1474 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1475 - Output file successfully removed ok 1476 - rmtree gave no error ok 1477 - Extract dir successfully removed ok 1478 - extract() for 'y.tar.gz' reports success (PP: 1 Bin: 0) ok 1479 - No errors capturing buffers ok 1480 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1481 - Found correct output file 'y/z' ok 1482 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1483 - Extract dir found ok 1484 - Extract dir exists ok 1485 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1486 - Output file successfully removed ok 1487 - rmtree gave no error ok 1488 - Extract dir successfully removed ok 1489 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1490 - Archive type is_tgz recognized properly ok 1491 - extract() for 'y.tar.gz' reports success (PP: 1 Bin: 0) ok 1492 - No errors capturing buffers ok 1493 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1494 - Found correct output file 'y/z' ok 1495 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1496 - Extract dir found ok 1497 - Extract dir exists ok 1498 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1499 - Output file successfully removed ok 1500 - rmtree gave no error ok 1501 - Extract dir successfully removed ok 1502 - extract() for 'y.tar.gz' reports success (PP: 1 Bin: 0) ok 1503 - No errors capturing buffers ok 1504 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1505 - Found correct output file 'y/z' ok 1506 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1507 - Extract dir found ok 1508 - Extract dir exists ok 1509 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1510 - Output file successfully removed ok 1511 - rmtree gave no error ok 1512 - Extract dir successfully removed ok 1513 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1514 - Archive type is_zip recognized properly ok 1515 - extract() for 'y.jar' reports success (PP: 1 Bin: 0) ok 1516 - No errors capturing buffers ok 1517 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1518 - Found correct output file 'y/z' ok 1519 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1520 - Extract dir found ok 1521 - Extract dir exists ok 1522 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1523 - Output file successfully removed ok 1524 - rmtree gave no error ok 1525 - Extract dir successfully removed ok 1526 - extract() for 'y.jar' reports success (PP: 1 Bin: 0) ok 1527 - No errors capturing buffers ok 1528 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1529 - Found correct output file 'y/z' ok 1530 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1531 - Extract dir found ok 1532 - Extract dir exists ok 1533 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1534 - Output file successfully removed ok 1535 - rmtree gave no error ok 1536 - Extract dir successfully removed ok 1537 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1538 - Archive type is_tbz recognized properly ok 1539 - extract() for 'y.tbz' reports success (PP: 1 Bin: 0) ok 1540 - No errors capturing buffers ok 1541 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1542 - Found correct output file 'y/z' ok 1543 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1544 - Extract dir found ok 1545 - Extract dir exists ok 1546 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1547 - Output file successfully removed ok 1548 - rmtree gave no error ok 1549 - Extract dir successfully removed ok 1550 - extract() for 'y.tbz' reports success (PP: 1 Bin: 0) ok 1551 - No errors capturing buffers ok 1552 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1553 - Found correct output file 'y/z' ok 1554 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1555 - Extract dir found ok 1556 - Extract dir exists ok 1557 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1558 - Output file successfully removed ok 1559 - rmtree gave no error ok 1560 - Extract dir successfully removed ok 1561 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1562 - Archive type is_tbz recognized properly ok 1563 - extract() for 'y.tbz' reports success (PP: 1 Bin: 0) ok 1564 - No errors capturing buffers ok 1565 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1566 - Found correct output file 'y/z' ok 1567 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1568 - Extract dir found ok 1569 - Extract dir exists ok 1570 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1571 - Output file successfully removed ok 1572 - rmtree gave no error ok 1573 - Extract dir successfully removed ok 1574 - extract() for 'y.tbz' reports success (PP: 1 Bin: 0) ok 1575 - No errors capturing buffers ok 1576 - Found correct number of output files (y/LISTSEP_FLAGy/z) ok 1577 - Found correct output file 'y/z' ok 1578 - Output file '/build/libarchive-extract-perl-0.80/t/out/y/z' exists ok 1579 - Extract dir found ok 1580 - Extract dir exists ok 1581 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out/y' ok 1582 - Output file successfully removed ok 1583 - rmtree gave no error ok 1584 - Extract dir successfully removed ok 1585 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1586 - Archive type is_Z recognized properly ok 1587 - extract() for 'x.Z' reports success (PP: 1 Bin: 0) ok 1588 - No errors capturing buffers ok 1589 - Found correct number of output files (a) ok 1590 - Found correct output file 'a' ok 1591 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1592 - Extract dir found ok 1593 - Extract dir exists ok 1594 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1595 - Output file successfully removed ok 1596 - rmtree gave no error ok 1597 - Extract dir successfully removed ok 1598 - extract() for 'x.Z' reports success (PP: 1 Bin: 0) ok 1599 - No errors capturing buffers ok 1600 - Found correct number of output files (a) ok 1601 - Found correct output file 'a' ok 1602 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1603 - Extract dir found ok 1604 - Extract dir exists ok 1605 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1606 - Output file successfully removed ok 1607 - rmtree gave no error ok 1608 - Extract dir successfully removed ok 1609 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1610 - Archive type is_gz recognized properly ok 1611 - extract() for 'x.gz' reports success (PP: 1 Bin: 0) ok 1612 - No errors capturing buffers ok 1613 - Found correct number of output files (a) ok 1614 - Found correct output file 'a' ok 1615 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1616 - Extract dir found ok 1617 - Extract dir exists ok 1618 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1619 - Output file successfully removed ok 1620 - rmtree gave no error ok 1621 - Extract dir successfully removed ok 1622 - extract() for 'x.gz' reports success (PP: 1 Bin: 0) ok 1623 - No errors capturing buffers ok 1624 - Found correct number of output files (a) ok 1625 - Found correct output file 'a' ok 1626 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1627 - Extract dir found ok 1628 - Extract dir exists ok 1629 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1630 - Output file successfully removed ok 1631 - rmtree gave no error ok 1632 - Extract dir successfully removed ok 1633 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1634 - Archive type is_tgz recognized properly ok 1635 - extract() for 'x.tar.gz' reports success (PP: 1 Bin: 0) ok 1636 - No errors capturing buffers ok 1637 - Found correct number of output files (a) ok 1638 - Found correct output file 'a' ok 1639 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1640 - Extract dir found ok 1641 - Extract dir exists ok 1642 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1643 - Output file successfully removed ok 1644 - rmtree gave no error ok 1645 - Extract dir successfully removed ok 1646 - extract() for 'x.tar.gz' reports success (PP: 1 Bin: 0) ok 1647 - No errors capturing buffers ok 1648 - Found correct number of output files (a) ok 1649 - Found correct output file 'a' ok 1650 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1651 - Extract dir found ok 1652 - Extract dir exists ok 1653 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1654 - Output file successfully removed ok 1655 - rmtree gave no error ok 1656 - Extract dir successfully removed ok 1657 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1658 - Archive type is_tgz recognized properly ok 1659 - extract() for 'x.tar.gz' reports success (PP: 1 Bin: 0) ok 1660 - No errors capturing buffers ok 1661 - Found correct number of output files (a) ok 1662 - Found correct output file 'a' ok 1663 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1664 - Extract dir found ok 1665 - Extract dir exists ok 1666 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1667 - Output file successfully removed ok 1668 - rmtree gave no error ok 1669 - Extract dir successfully removed ok 1670 - extract() for 'x.tar.gz' reports success (PP: 1 Bin: 0) ok 1671 - No errors capturing buffers ok 1672 - Found correct number of output files (a) ok 1673 - Found correct output file 'a' ok 1674 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1675 - Extract dir found ok 1676 - Extract dir exists ok 1677 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1678 - Output file successfully removed ok 1679 - rmtree gave no error ok 1680 - Extract dir successfully removed ok 1681 - An object of class 'Archive::Extract' isa 'Archive::Extract' ok 1682 - Archive type is_zip recognized properly ok 1683 - extract() for 'x.jar' reports success (PP: 1 Bin: 0) ok 1684 - No errors capturing buffers ok 1685 - Found correct number of output files (a) ok 1686 - Found correct output file 'a' ok 1687 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1688 - Extract dir found ok 1689 - Extract dir exists ok 1690 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1691 - Output file successfully removed ok 1692 - rmtree gave no error ok 1693 - Extract dir successfully removed ok 1694 - extract() for 'x.jar' reports success (PP: 1 Bin: 0) ok 1695 - No errors capturing buffers ok 1696 - Found correct number of output files (a) ok 1697 - Found correct output file 'a' ok 1698 - Output file '/build/libarchive-extract-perl-0.80/t/out/a' exists ok 1699 - Extract dir found ok 1700 - Extract dir exists ok 1701 - Extract dir is expected '/build/libarchive-extract-perl-0.80/t/out' ok 1702 - Output file successfully removed ok 1703 - rmtree gave no error ok 1704 - Extract dir successfully removed 1..1704 ok All tests successful. Files=1, Tests=1704, 8 wallclock secs ( 0.38 usr 0.04 sys + 2.57 cusr 0.90 csys = 3.89 CPU) Result: PASS make[1]: Leaving directory '/build/libarchive-extract-perl-0.80' fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install make -j1 install DESTDIR=/build/libarchive-extract-perl-0.80/debian/libarchive-extract-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/libarchive-extract-perl-0.80' Manifying 1 pod document Installing /build/libarchive-extract-perl-0.80/debian/libarchive-extract-perl/usr/share/perl5/Archive/Extract.pm Installing /build/libarchive-extract-perl-0.80/debian/libarchive-extract-perl/usr/share/man/man3/Archive::Extract.3pm make[1]: Leaving directory '/build/libarchive-extract-perl-0.80' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libarchive-extract-perl' in '../libarchive-extract-perl_0.80-1_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libarchive-extract-perl_0.80-1_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/13680 and its subdirectories I: Current time: Wed Aug 12 21:22:12 -12 2020 I: pbuilder-time-stamp: 1597310532 Thu Aug 13 09:22:15 UTC 2020 I: 1st build successful. Starting 2nd build on remote node codethink-sled13-arm64.debian.net. Thu Aug 13 09:22:15 UTC 2020 I: Preparing to do remote build '2' on codethink-sled13-arm64.debian.net. Thu Aug 13 09:23:17 UTC 2020 I: Deleting $TMPDIR on codethink-sled13-arm64.debian.net. Thu Aug 13 09:23:19 UTC 2020 I: libarchive-extract-perl_0.80-1_arm64.changes: Format: 1.8 Date: Sat, 21 Jan 2017 18:08:00 +0100 Source: libarchive-extract-perl Binary: libarchive-extract-perl Architecture: all Version: 0.80-1 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libarchive-extract-perl - generic archive extracting module Changes: libarchive-extract-perl (0.80-1) unstable; urgency=medium . * Import upstream version 0.80. * Update years of packaging copyright. Checksums-Sha1: 7d077414a55b4ddd22daa0d0b8fac05ddf25280c 25016 libarchive-extract-perl_0.80-1_all.deb eed3f6e0fe09f145dd79a8f523c2c79cb59f9d2a 4394 libarchive-extract-perl_0.80-1_arm64.buildinfo Checksums-Sha256: 0606ee4a364d78d31218adf6261fde5b05f92c428e03b752cfae3ab3c1f54735 25016 libarchive-extract-perl_0.80-1_all.deb fc4b205d80a979e782bcd22d753929a75b0a0ffd6208f095c89d7eae16c9b244 4394 libarchive-extract-perl_0.80-1_arm64.buildinfo Files: e8ae57d574d1d161a0b53c5abd10ca6f 25016 perl optional libarchive-extract-perl_0.80-1_all.deb 3bfa752b062723709d5c735ddada345c 4394 perl optional libarchive-extract-perl_0.80-1_arm64.buildinfo Thu Aug 13 09:23:21 UTC 2020 I: diffoscope 155 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.RANhRB1E19/libarchive-extract-perl_0.80-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.RANhRB1E19/libarchive-extract-perl_0.80-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.RANhRB1E19/libarchive-extract-perl_0.80-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.RANhRB1E19/b1/libarchive-extract-perl_0.80-1_arm64.changes /srv/reproducible-results/rbuild-debian/tmp.RANhRB1E19/b2/libarchive-extract-perl_0.80-1_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.214s) 0.214s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.023s) 0.022s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Thu Aug 13 09:23:22 UTC 2020 I: diffoscope 155 found no differences in the changes files, and a .buildinfo file also exists. Thu Aug 13 09:23:22 UTC 2020 I: libarchive-extract-perl from buster built successfully and reproducibly on arm64. Thu Aug 13 09:23:23 UTC 2020 I: Submitting .buildinfo files to external archives: Thu Aug 13 09:23:23 UTC 2020 I: Submitting 8.0K b1/libarchive-extract-perl_0.80-1_arm64.buildinfo.asc Thu Aug 13 09:23:25 UTC 2020 I: Submitting 8.0K b2/libarchive-extract-perl_0.80-1_arm64.buildinfo.asc Thu Aug 13 09:23:26 UTC 2020 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Thu Aug 13 09:23:26 UTC 2020 I: Done submitting .buildinfo files. Thu Aug 13 09:23:26 UTC 2020 I: Removing signed libarchive-extract-perl_0.80-1_arm64.buildinfo.asc files: removed './b1/libarchive-extract-perl_0.80-1_arm64.buildinfo.asc' removed './b2/libarchive-extract-perl_0.80-1_arm64.buildinfo.asc'