Fri May 29 04:37:29 UTC 2020 I: starting to build libopenusb/buster/armhf on jenkins on '2020-05-29 04:37' Fri May 29 04:37:29 UTC 2020 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_43/2142/console.log Fri May 29 04:37:29 UTC 2020 I: Downloading source for buster/libopenusb=1.1.11-2 --2020-05-29 04:37:30-- http://deb.debian.org/debian/pool/main/libo/libopenusb/libopenusb_1.1.11-2.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1682 (1.6K) Saving to: ‘libopenusb_1.1.11-2.dsc’ 0K . 100% 175M=0s 2020-05-29 04:37:30 (175 MB/s) - ‘libopenusb_1.1.11-2.dsc’ saved [1682/1682] Fri May 29 04:37:30 UTC 2020 I: libopenusb_1.1.11-2.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 3.0 (quilt) Source: libopenusb Binary: libopenusb-dev, libopenusb0, libopenusb-doc Architecture: linux-any all Version: 1.1.11-2 Maintainer: Simon Richter Homepage: http://openusb.wiki.sourceforge.net/ Standards-Version: 3.9.3 Build-Depends: debhelper (>= 9), autotools-dev, pkg-config, libglib2.0-dev, libdbus-1-dev, libdbus-glib-1-dev, libusb-dev, libudev-dev Build-Depends-Indep: openjade, docbook-xml, docbook-dsssl Package-List: libopenusb-dev deb libdevel extra arch=linux-any libopenusb-doc deb doc extra arch=all libopenusb0 deb libs extra arch=linux-any Checksums-Sha1: e970de75e2c29ec73a21b96be71fd8df1371eda3 857347 libopenusb_1.1.11.orig.tar.gz ff084871ae40827b05a879ff4e4128b56da47d30 3380 libopenusb_1.1.11-2.debian.tar.xz Checksums-Sha256: 434242e758155aba6e4ddd28460dc9a2565c44bb8861a35ceaf7a6bbcae4aa1e 857347 libopenusb_1.1.11.orig.tar.gz 6ab2dd5399b26150d46528ef96ac441ec3a79b6468e8e63367a0d909df5d11f0 3380 libopenusb_1.1.11-2.debian.tar.xz Files: a9dc01c88db0c6688fc92cf7ae0eb9ca 857347 libopenusb_1.1.11.orig.tar.gz 80df395542bb198141f1a4f090ef32c5 3380 libopenusb_1.1.11-2.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQEzBAEBCAAdFiEEtjuqOJSXmNjSiX3Tfr04e7CZCBEFAlmCSgkACgkQfr04e7CZ CBHfUwf/U/jvrGiG3W08Ad2nX7bgz7qgQI1kVgEaI9PLuGeKIHGkcry7zNAuVpOX oGxPBJED8GeIBU1ER7AdbsqxmQwtKQi2SeKz/WHT9LqWTnjYZauX1DgO3zTn8UbF Qa1HrBRts7g5mbZoOfIL0pYP8qH0cWpZyUSRlfbd/tQA3METM8tjcUMknQNfjuhE M0zmzCUeU6gguIVXnwg9fOrlyW8k1INGtnHz+Si1y3gigETgWO3NGuA/hW+LsmM/ 4goU3mNV4Jbaa1Juu4ma6A/JXVLVyBXx97bPMnmqtCbZLTKCpObfylLJGKRMEEcG Gl+sGgjgZLiPC5n7RKOm9v/lu51stQ== =zNa6 -----END PGP SIGNATURE----- Fri May 29 04:37:30 UTC 2020 I: Checking whether the package is not for us Fri May 29 04:37:30 UTC 2020 I: Starting 1st build on remote node cbxi4b-armhf-rb.debian.net. Fri May 29 04:37:30 UTC 2020 I: Preparing to do remote build '1' on cbxi4b-armhf-rb.debian.net. Fri May 29 04:51:47 UTC 2020 I: Deleting $TMPDIR on cbxi4b-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Thu May 28 16:37:38 -12 2020 I: pbuilder-time-stamp: 1590727058 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libopenusb_1.1.11-2.dsc] I: copying [./libopenusb_1.1.11.orig.tar.gz] I: copying [./libopenusb_1.1.11-2.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Wed Aug 2 09:54:17 2017 -12 gpgv: using RSA key B63BAA38949798D8D2897DD37EBD387BB0990811 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libopenusb_1.1.11-2.dsc dpkg-source: info: extracting libopenusb in libopenusb-1.1.11 dpkg-source: info: unpacking libopenusb_1.1.11.orig.tar.gz dpkg-source: info: unpacking libopenusb_1.1.11-2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying paralleldocs dpkg-source: info: applying inline I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 9), autotools-dev, pkg-config, libglib2.0-dev, libdbus-1-dev, libdbus-glib-1-dev, libusb-dev, libudev-dev, openjade, docbook-xml, docbook-dsssl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 9); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on autotools-dev; however: Package autotools-dev is not installed. pbuilder-satisfydepends-dummy depends on pkg-config; however: Package pkg-config is not installed. pbuilder-satisfydepends-dummy depends on libglib2.0-dev; however: Package libglib2.0-dev is not installed. pbuilder-satisfydepends-dummy depends on libdbus-1-dev; however: Package libdbus-1-dev is not installed. pbuilder-satisfydepends-dummy depends on libdbus-glib-1-dev; however: Package libdbus-glib-1-dev is not installed. pbuilder-satisfydepends-dummy depends on libusb-dev; however: Package libusb-dev is not installed. pbuilder-satisfydepends-dummy depends on libudev-dev; however: Package libudev-dev is not installed. pbuilder-satisfydepends-dummy depends on openjade; however: Package openjade is not installed. pbuilder-satisfydepends-dummy depends on docbook-xml; however: Package docbook-xml is not installed. pbuilder-satisfydepends-dummy depends on docbook-dsssl; however: Package docbook-dsssl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} docbook-dsssl{a} docbook-xml{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libblkid-dev{a} libbsd0{a} libcroco3{a} libdbus-1-3{a} libdbus-1-dev{a} libdbus-glib-1-2{a} libdbus-glib-1-dev{a} libdbus-glib-1-dev-bin{a} libelf1{a} libexpat1{a} libffi-dev{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libglib2.0-bin{a} libglib2.0-data{a} libglib2.0-dev{a} libglib2.0-dev-bin{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libmount-dev{a} libmpdec2{a} libncurses6{a} libosp5{a} libostyle1c2{a} libpcre16-3{a} libpcre3-dev{a} libpcre32-3{a} libpcrecpp0v5{a} libpipeline1{a} libpython3-stdlib{a} libpython3.7-minimal{a} libpython3.7-stdlib{a} libreadline7{a} libselinux1-dev{a} libsepol1-dev{a} libsigsegv2{a} libssl1.1{a} libtool{a} libuchardet0{a} libudev-dev{a} libusb-0.1-4{a} libusb-dev{a} libxml2{a} m4{a} man-db{a} mime-support{a} openjade{a} pkg-config{a} po-debconf{a} python3{a} python3-distutils{a} python3-lib2to3{a} python3-minimal{a} python3.7{a} python3.7-minimal{a} readline-common{a} sensible-utils{a} sgml-base{a} sgml-data{a} uuid-dev{a} xml-core{a} zlib1g-dev{a} The following packages are RECOMMENDED but will NOT be installed: curl dbus libarchive-cpio-perl libgpm2 libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 80 newly installed, 0 to remove and 0 not upgraded. Need to get 32.6 MB of archives. After unpacking 124 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main armhf libbsd0 armhf 0.9.1-2 [103 kB] Get: 2 http://deb.debian.org/debian buster/main armhf bsdmainutils armhf 11.1.2+b1 [186 kB] Get: 3 http://deb.debian.org/debian buster/main armhf libuchardet0 armhf 0.0.6-3 [62.2 kB] Get: 4 http://deb.debian.org/debian buster/main armhf groff-base armhf 1.22.4-3 [828 kB] Get: 5 http://deb.debian.org/debian buster/main armhf libpipeline1 armhf 1.5.1-2 [26.8 kB] Get: 6 http://deb.debian.org/debian buster/main armhf man-db armhf 2.8.5-2 [1240 kB] Get: 7 http://deb.debian.org/debian buster/main armhf libssl1.1 armhf 1.1.1d-0+deb10u3 [1299 kB] Get: 8 http://deb.debian.org/debian buster/main armhf libpython3.7-minimal armhf 3.7.3-2+deb10u1 [582 kB] Get: 9 http://deb.debian.org/debian buster/main armhf libexpat1 armhf 2.2.6-2+deb10u1 [78.0 kB] Get: 10 http://deb.debian.org/debian buster/main armhf python3.7-minimal armhf 3.7.3-2+deb10u1 [1465 kB] Get: 11 http://deb.debian.org/debian buster/main armhf python3-minimal armhf 3.7.3-1 [36.6 kB] Get: 12 http://deb.debian.org/debian buster/main armhf mime-support all 3.62 [37.2 kB] Get: 13 http://deb.debian.org/debian buster/main armhf libmpdec2 armhf 2.4.2-2 [69.3 kB] Get: 14 http://deb.debian.org/debian buster/main armhf readline-common all 7.0-5 [70.6 kB] Get: 15 http://deb.debian.org/debian buster/main armhf libreadline7 armhf 7.0-5 [131 kB] Get: 16 http://deb.debian.org/debian buster/main armhf libpython3.7-stdlib armhf 3.7.3-2+deb10u1 [1660 kB] Get: 17 http://deb.debian.org/debian buster/main armhf python3.7 armhf 3.7.3-2+deb10u1 [330 kB] Get: 18 http://deb.debian.org/debian buster/main armhf libpython3-stdlib armhf 3.7.3-1 [20.0 kB] Get: 19 http://deb.debian.org/debian buster/main armhf python3 armhf 3.7.3-1 [61.5 kB] Get: 20 http://deb.debian.org/debian buster/main armhf sgml-base all 1.29 [14.8 kB] Get: 21 http://deb.debian.org/debian buster/main armhf sensible-utils all 0.0.12 [15.8 kB] Get: 22 http://deb.debian.org/debian buster/main armhf libmagic-mgc armhf 1:5.35-4+deb10u1 [242 kB] Get: 23 http://deb.debian.org/debian buster/main armhf libmagic1 armhf 1:5.35-4+deb10u1 [110 kB] Get: 24 http://deb.debian.org/debian buster/main armhf file armhf 1:5.35-4+deb10u1 [65.5 kB] Get: 25 http://deb.debian.org/debian buster/main armhf gettext-base armhf 0.19.8.1-9 [118 kB] Get: 26 http://deb.debian.org/debian buster/main armhf libsigsegv2 armhf 2.12-2 [32.1 kB] Get: 27 http://deb.debian.org/debian buster/main armhf m4 armhf 1.4.18-2 [190 kB] Get: 28 http://deb.debian.org/debian buster/main armhf autoconf all 2.69-11 [341 kB] Get: 29 http://deb.debian.org/debian buster/main armhf autotools-dev all 20180224.1 [77.0 kB] Get: 30 http://deb.debian.org/debian buster/main armhf automake all 1:1.16.1-4 [771 kB] Get: 31 http://deb.debian.org/debian buster/main armhf autopoint all 0.19.8.1-9 [434 kB] Get: 32 http://deb.debian.org/debian buster/main armhf libtool all 2.4.6-9 [547 kB] Get: 33 http://deb.debian.org/debian buster/main armhf dh-autoreconf all 19 [16.9 kB] Get: 34 http://deb.debian.org/debian buster/main armhf libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 35 http://deb.debian.org/debian buster/main armhf libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 36 http://deb.debian.org/debian buster/main armhf dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 37 http://deb.debian.org/debian buster/main armhf libelf1 armhf 0.176-1.1 [158 kB] Get: 38 http://deb.debian.org/debian buster/main armhf dwz armhf 0.12-3 [72.0 kB] Get: 39 http://deb.debian.org/debian buster/main armhf libglib2.0-0 armhf 2.58.3-2+deb10u2 [1101 kB] Get: 40 http://deb.debian.org/debian buster/main armhf libicu63 armhf 63.1-6+deb10u1 [8005 kB] Get: 41 http://deb.debian.org/debian buster/main armhf libxml2 armhf 2.9.4+dfsg1-7+b3 [595 kB] Get: 42 http://deb.debian.org/debian buster/main armhf libcroco3 armhf 0.6.12-3 [133 kB] Get: 43 http://deb.debian.org/debian buster/main armhf libncurses6 armhf 6.1+20181013-2+deb10u2 [79.8 kB] Get: 44 http://deb.debian.org/debian buster/main armhf gettext armhf 0.19.8.1-9 [1242 kB] Get: 45 http://deb.debian.org/debian buster/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 46 http://deb.debian.org/debian buster/main armhf po-debconf all 1.0.21 [248 kB] Get: 47 http://deb.debian.org/debian buster/main armhf debhelper all 12.1.1 [1016 kB] Get: 48 http://deb.debian.org/debian buster/main armhf libosp5 armhf 1.5.2-13+b1 [877 kB] Get: 49 http://deb.debian.org/debian buster/main armhf libostyle1c2 armhf 1.4devel1-21.3+b1 [543 kB] Get: 50 http://deb.debian.org/debian buster/main armhf openjade armhf 1.4devel1-21.3+b1 [235 kB] Get: 51 http://deb.debian.org/debian buster/main armhf xml-core all 0.18+nmu1 [23.8 kB] Get: 52 http://deb.debian.org/debian buster/main armhf sgml-data all 2.0.11 [179 kB] Get: 53 http://deb.debian.org/debian buster/main armhf docbook-xml all 4.5-8 [84.7 kB] Get: 54 http://deb.debian.org/debian buster/main armhf docbook-dsssl all 1.79-9.1 [234 kB] Get: 55 http://deb.debian.org/debian buster/main armhf uuid-dev armhf 2.33.1-0.1 [92.6 kB] Get: 56 http://deb.debian.org/debian buster/main armhf libblkid-dev armhf 2.33.1-0.1 [217 kB] Get: 57 http://deb.debian.org/debian buster/main armhf libdbus-1-3 armhf 1.12.16-1 [190 kB] Get: 58 http://deb.debian.org/debian buster/main armhf pkg-config armhf 0.29-6 [60.7 kB] Get: 59 http://deb.debian.org/debian buster/main armhf libdbus-1-dev armhf 1.12.16-1 [231 kB] Get: 60 http://deb.debian.org/debian buster/main armhf libdbus-glib-1-2 armhf 0.110-4 [61.1 kB] Get: 61 http://deb.debian.org/debian buster/main armhf libdbus-glib-1-dev-bin armhf 0.110-4 [47.5 kB] Get: 62 http://deb.debian.org/debian buster/main armhf libffi-dev armhf 3.2.1-9 [154 kB] Get: 63 http://deb.debian.org/debian buster/main armhf libglib2.0-data all 2.58.3-2+deb10u2 [1110 kB] Get: 64 http://deb.debian.org/debian buster/main armhf libglib2.0-bin armhf 2.58.3-2+deb10u2 [119 kB] Get: 65 http://deb.debian.org/debian buster/main armhf python3-lib2to3 all 3.7.3-1 [76.7 kB] Get: 66 http://deb.debian.org/debian buster/main armhf python3-distutils all 3.7.3-1 [142 kB] Get: 67 http://deb.debian.org/debian buster/main armhf libglib2.0-dev-bin armhf 2.58.3-2+deb10u2 [155 kB] Get: 68 http://deb.debian.org/debian buster/main armhf libmount-dev armhf 2.33.1-0.1 [223 kB] Get: 69 http://deb.debian.org/debian buster/main armhf libpcre16-3 armhf 2:8.39-12 [238 kB] Get: 70 http://deb.debian.org/debian buster/main armhf libpcre32-3 armhf 2:8.39-12 [231 kB] Get: 71 http://deb.debian.org/debian buster/main armhf libpcrecpp0v5 armhf 2:8.39-12 [150 kB] Get: 72 http://deb.debian.org/debian buster/main armhf libpcre3-dev armhf 2:8.39-12 [585 kB] Get: 73 http://deb.debian.org/debian buster/main armhf libsepol1-dev armhf 2.8-1 [318 kB] Get: 74 http://deb.debian.org/debian buster/main armhf libselinux1-dev armhf 2.8-1+b1 [162 kB] Get: 75 http://deb.debian.org/debian buster/main armhf zlib1g-dev armhf 1:1.2.11.dfsg-1 [207 kB] Get: 76 http://deb.debian.org/debian buster/main armhf libglib2.0-dev armhf 2.58.3-2+deb10u2 [1386 kB] Get: 77 http://deb.debian.org/debian buster/main armhf libdbus-glib-1-dev armhf 0.110-4 [75.1 kB] Get: 78 http://deb.debian.org/debian buster/main armhf libudev-dev armhf 241-7~deb10u4 [110 kB] Get: 79 http://deb.debian.org/debian buster/main armhf libusb-0.1-4 armhf 2:0.1.12-32 [21.7 kB] Get: 80 http://deb.debian.org/debian buster/main armhf libusb-dev armhf 2:0.1.12-32 [36.9 kB] Fetched 32.6 MB in 7s (4542 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18932 files and directories currently installed.) Preparing to unpack .../0-libbsd0_0.9.1-2_armhf.deb ... Unpacking libbsd0:armhf (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../1-bsdmainutils_11.1.2+b1_armhf.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../2-libuchardet0_0.0.6-3_armhf.deb ... Unpacking libuchardet0:armhf (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../3-groff-base_1.22.4-3_armhf.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../4-libpipeline1_1.5.1-2_armhf.deb ... Unpacking libpipeline1:armhf (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../5-man-db_2.8.5-2_armhf.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package libssl1.1:armhf. Preparing to unpack .../6-libssl1.1_1.1.1d-0+deb10u3_armhf.deb ... Unpacking libssl1.1:armhf (1.1.1d-0+deb10u3) ... Selecting previously unselected package libpython3.7-minimal:armhf. Preparing to unpack .../7-libpython3.7-minimal_3.7.3-2+deb10u1_armhf.deb ... Unpacking libpython3.7-minimal:armhf (3.7.3-2+deb10u1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../8-libexpat1_2.2.6-2+deb10u1_armhf.deb ... Unpacking libexpat1:armhf (2.2.6-2+deb10u1) ... Selecting previously unselected package python3.7-minimal. Preparing to unpack .../9-python3.7-minimal_3.7.3-2+deb10u1_armhf.deb ... Unpacking python3.7-minimal (3.7.3-2+deb10u1) ... Setting up libssl1.1:armhf (1.1.1d-0+deb10u3) ... Setting up libpython3.7-minimal:armhf (3.7.3-2+deb10u1) ... Setting up libexpat1:armhf (2.2.6-2+deb10u1) ... Setting up python3.7-minimal (3.7.3-2+deb10u1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19827 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.7.3-1_armhf.deb ... Unpacking python3-minimal (3.7.3-1) ... Selecting previously unselected package mime-support. Preparing to unpack .../1-mime-support_3.62_all.deb ... Unpacking mime-support (3.62) ... Selecting previously unselected package libmpdec2:armhf. Preparing to unpack .../2-libmpdec2_2.4.2-2_armhf.deb ... Unpacking libmpdec2:armhf (2.4.2-2) ... Selecting previously unselected package readline-common. Preparing to unpack .../3-readline-common_7.0-5_all.deb ... Unpacking readline-common (7.0-5) ... Selecting previously unselected package libreadline7:armhf. Preparing to unpack .../4-libreadline7_7.0-5_armhf.deb ... Unpacking libreadline7:armhf (7.0-5) ... Selecting previously unselected package libpython3.7-stdlib:armhf. Preparing to unpack .../5-libpython3.7-stdlib_3.7.3-2+deb10u1_armhf.deb ... Unpacking libpython3.7-stdlib:armhf (3.7.3-2+deb10u1) ... Selecting previously unselected package python3.7. Preparing to unpack .../6-python3.7_3.7.3-2+deb10u1_armhf.deb ... Unpacking python3.7 (3.7.3-2+deb10u1) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../7-libpython3-stdlib_3.7.3-1_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.7.3-1) ... Setting up python3-minimal (3.7.3-1) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20288 files and directories currently installed.) Preparing to unpack .../00-python3_3.7.3-1_armhf.deb ... Unpacking python3 (3.7.3-1) ... Selecting previously unselected package sgml-base. Preparing to unpack .../01-sgml-base_1.29_all.deb ... Unpacking sgml-base (1.29) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../02-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../03-libmagic-mgc_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../04-libmagic1_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking libmagic1:armhf (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../05-file_1%3a5.35-4+deb10u1_armhf.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../06-gettext-base_0.19.8.1-9_armhf.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../07-libsigsegv2_2.12-2_armhf.deb ... Unpacking libsigsegv2:armhf (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../08-m4_1.4.18-2_armhf.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../09-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../10-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../11-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../12-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../13-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../14-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../15-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../16-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../17-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../18-libelf1_0.176-1.1_armhf.deb ... Unpacking libelf1:armhf (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../19-dwz_0.12-3_armhf.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:armhf. Preparing to unpack .../20-libglib2.0-0_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-0:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:armhf. Preparing to unpack .../21-libicu63_63.1-6+deb10u1_armhf.deb ... Unpacking libicu63:armhf (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../22-libxml2_2.9.4+dfsg1-7+b3_armhf.deb ... Unpacking libxml2:armhf (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:armhf. Preparing to unpack .../23-libcroco3_0.6.12-3_armhf.deb ... Unpacking libcroco3:armhf (0.6.12-3) ... Selecting previously unselected package libncurses6:armhf. Preparing to unpack .../24-libncurses6_6.1+20181013-2+deb10u2_armhf.deb ... Unpacking libncurses6:armhf (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.19.8.1-9_armhf.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package libosp5. Preparing to unpack .../29-libosp5_1.5.2-13+b1_armhf.deb ... Unpacking libosp5 (1.5.2-13+b1) ... Selecting previously unselected package libostyle1c2. Preparing to unpack .../30-libostyle1c2_1.4devel1-21.3+b1_armhf.deb ... Unpacking libostyle1c2 (1.4devel1-21.3+b1) ... Selecting previously unselected package openjade. Preparing to unpack .../31-openjade_1.4devel1-21.3+b1_armhf.deb ... Unpacking openjade (1.4devel1-21.3+b1) ... Selecting previously unselected package xml-core. Preparing to unpack .../32-xml-core_0.18+nmu1_all.deb ... Unpacking xml-core (0.18+nmu1) ... Selecting previously unselected package sgml-data. Preparing to unpack .../33-sgml-data_2.0.11_all.deb ... Unpacking sgml-data (2.0.11) ... Selecting previously unselected package docbook-xml. Preparing to unpack .../34-docbook-xml_4.5-8_all.deb ... Unpacking docbook-xml (4.5-8) ... Selecting previously unselected package docbook-dsssl. Preparing to unpack .../35-docbook-dsssl_1.79-9.1_all.deb ... Unpacking docbook-dsssl (1.79-9.1) ... Selecting previously unselected package uuid-dev:armhf. Preparing to unpack .../36-uuid-dev_2.33.1-0.1_armhf.deb ... Unpacking uuid-dev:armhf (2.33.1-0.1) ... Selecting previously unselected package libblkid-dev:armhf. Preparing to unpack .../37-libblkid-dev_2.33.1-0.1_armhf.deb ... Unpacking libblkid-dev:armhf (2.33.1-0.1) ... Selecting previously unselected package libdbus-1-3:armhf. Preparing to unpack .../38-libdbus-1-3_1.12.16-1_armhf.deb ... Unpacking libdbus-1-3:armhf (1.12.16-1) ... Selecting previously unselected package pkg-config. Preparing to unpack .../39-pkg-config_0.29-6_armhf.deb ... Unpacking pkg-config (0.29-6) ... Selecting previously unselected package libdbus-1-dev:armhf. Preparing to unpack .../40-libdbus-1-dev_1.12.16-1_armhf.deb ... Unpacking libdbus-1-dev:armhf (1.12.16-1) ... Selecting previously unselected package libdbus-glib-1-2:armhf. Preparing to unpack .../41-libdbus-glib-1-2_0.110-4_armhf.deb ... Unpacking libdbus-glib-1-2:armhf (0.110-4) ... Selecting previously unselected package libdbus-glib-1-dev-bin. Preparing to unpack .../42-libdbus-glib-1-dev-bin_0.110-4_armhf.deb ... Unpacking libdbus-glib-1-dev-bin (0.110-4) ... Selecting previously unselected package libffi-dev:armhf. Preparing to unpack .../43-libffi-dev_3.2.1-9_armhf.deb ... Unpacking libffi-dev:armhf (3.2.1-9) ... Selecting previously unselected package libglib2.0-data. Preparing to unpack .../44-libglib2.0-data_2.58.3-2+deb10u2_all.deb ... Unpacking libglib2.0-data (2.58.3-2+deb10u2) ... Selecting previously unselected package libglib2.0-bin. Preparing to unpack .../45-libglib2.0-bin_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-bin (2.58.3-2+deb10u2) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../46-python3-lib2to3_3.7.3-1_all.deb ... Unpacking python3-lib2to3 (3.7.3-1) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../47-python3-distutils_3.7.3-1_all.deb ... Unpacking python3-distutils (3.7.3-1) ... Selecting previously unselected package libglib2.0-dev-bin. Preparing to unpack .../48-libglib2.0-dev-bin_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-dev-bin (2.58.3-2+deb10u2) ... Selecting previously unselected package libmount-dev:armhf. Preparing to unpack .../49-libmount-dev_2.33.1-0.1_armhf.deb ... Unpacking libmount-dev:armhf (2.33.1-0.1) ... Selecting previously unselected package libpcre16-3:armhf. Preparing to unpack .../50-libpcre16-3_2%3a8.39-12_armhf.deb ... Unpacking libpcre16-3:armhf (2:8.39-12) ... Selecting previously unselected package libpcre32-3:armhf. Preparing to unpack .../51-libpcre32-3_2%3a8.39-12_armhf.deb ... Unpacking libpcre32-3:armhf (2:8.39-12) ... Selecting previously unselected package libpcrecpp0v5:armhf. Preparing to unpack .../52-libpcrecpp0v5_2%3a8.39-12_armhf.deb ... Unpacking libpcrecpp0v5:armhf (2:8.39-12) ... Selecting previously unselected package libpcre3-dev:armhf. Preparing to unpack .../53-libpcre3-dev_2%3a8.39-12_armhf.deb ... Unpacking libpcre3-dev:armhf (2:8.39-12) ... Selecting previously unselected package libsepol1-dev:armhf. Preparing to unpack .../54-libsepol1-dev_2.8-1_armhf.deb ... Unpacking libsepol1-dev:armhf (2.8-1) ... Selecting previously unselected package libselinux1-dev:armhf. Preparing to unpack .../55-libselinux1-dev_2.8-1+b1_armhf.deb ... Unpacking libselinux1-dev:armhf (2.8-1+b1) ... Selecting previously unselected package zlib1g-dev:armhf. Preparing to unpack .../56-zlib1g-dev_1%3a1.2.11.dfsg-1_armhf.deb ... Unpacking zlib1g-dev:armhf (1:1.2.11.dfsg-1) ... Selecting previously unselected package libglib2.0-dev:armhf. Preparing to unpack .../57-libglib2.0-dev_2.58.3-2+deb10u2_armhf.deb ... Unpacking libglib2.0-dev:armhf (2.58.3-2+deb10u2) ... Selecting previously unselected package libdbus-glib-1-dev:armhf. Preparing to unpack .../58-libdbus-glib-1-dev_0.110-4_armhf.deb ... Unpacking libdbus-glib-1-dev:armhf (0.110-4) ... Selecting previously unselected package libudev-dev:armhf. Preparing to unpack .../59-libudev-dev_241-7~deb10u4_armhf.deb ... Unpacking libudev-dev:armhf (241-7~deb10u4) ... Selecting previously unselected package libusb-0.1-4:armhf. Preparing to unpack .../60-libusb-0.1-4_2%3a0.1.12-32_armhf.deb ... Unpacking libusb-0.1-4:armhf (2:0.1.12-32) ... Selecting previously unselected package libusb-dev. Preparing to unpack .../61-libusb-dev_2%3a0.1.12-32_armhf.deb ... Unpacking libusb-dev (2:0.1.12-32) ... Setting up libpcrecpp0v5:armhf (2:8.39-12) ... Setting up libpipeline1:armhf (1.5.1-2) ... Setting up mime-support (3.62) ... Setting up libpcre16-3:armhf (2:8.39-12) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:armhf (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libmagic1:armhf (1:5.35-4+deb10u1) ... Setting up libsepol1-dev:armhf (2.8-1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libffi-dev:armhf (3.2.1-9) ... Setting up libicu63:armhf (63.1-6+deb10u1) ... Setting up libusb-0.1-4:armhf (2:0.1.12-32) ... Setting up libosp5 (1.5.2-13+b1) ... Setting up autotools-dev (20180224.1) ... Setting up libglib2.0-data (2.58.3-2+deb10u2) ... Setting up uuid-dev:armhf (2.33.1-0.1) ... Setting up libncurses6:armhf (6.1+20181013-2+deb10u2) ... Setting up libdbus-1-3:armhf (1.12.16-1) ... Setting up libsigsegv2:armhf (2.12-2) ... Setting up libpcre32-3:armhf (2:8.39-12) ... Setting up autopoint (0.19.8.1-9) ... Setting up pkg-config (0.29-6) ... Setting up libudev-dev:armhf (241-7~deb10u4) ... Setting up zlib1g-dev:armhf (1:1.2.11.dfsg-1) ... Setting up libostyle1c2 (1.4devel1-21.3+b1) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:armhf (0.0.6-3) ... Setting up sgml-base (1.29) ... Setting up libmpdec2:armhf (2.4.2-2) ... Setting up libbsd0:armhf (0.9.1-2) ... Setting up libelf1:armhf (0.176-1.1) ... Setting up readline-common (7.0-5) ... Setting up openjade (1.4devel1-21.3+b1) ... Setting up libxml2:armhf (2.9.4+dfsg1-7+b3) ... Setting up libreadline7:armhf (7.0-5) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libblkid-dev:armhf (2.33.1-0.1) ... Setting up libpython3.7-stdlib:armhf (3.7.3-2+deb10u1) ... Setting up libtool (2.4.6-9) ... Setting up libpcre3-dev:armhf (2:8.39-12) ... Setting up libglib2.0-bin (2.58.3-2+deb10u2) ... Setting up m4 (1.4.18-2) ... Setting up libusb-dev (2:0.1.12-32) ... Setting up libdbus-1-dev:armhf (1.12.16-1) ... Setting up libdbus-glib-1-2:armhf (0.110-4) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:armhf (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up xml-core (0.18+nmu1) ... Setting up libmount-dev:armhf (2.33.1-0.1) ... Setting up libpython3-stdlib:armhf (3.7.3-1) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up python3.7 (3.7.3-2+deb10u1) ... Setting up gettext (0.19.8.1-9) ... Setting up libselinux1-dev:armhf (2.8-1+b1) ... Setting up libdbus-glib-1-dev-bin (0.110-4) ... Setting up python3 (3.7.3-1) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up python3-lib2to3 (3.7.3-1) ... Setting up python3-distutils (3.7.3-1) ... Setting up libglib2.0-dev-bin (2.58.3-2+deb10u2) ... Setting up po-debconf (1.0.21) ... Setting up libglib2.0-dev:armhf (2.58.3-2+deb10u2) ... Setting up libdbus-glib-1-dev:armhf (0.110-4) ... Setting up dh-autoreconf (19) ... Setting up debhelper (12.1.1) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Processing triggers for sgml-base (1.29) ... Setting up sgml-data (2.0.11) ... Processing triggers for sgml-base (1.29) ... Setting up docbook-xml (4.5-8) ... Processing triggers for sgml-base (1.29) ... Setting up docbook-dsssl (1.79-9.1) ... Processing triggers for sgml-base (1.29) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/libopenusb-1.1.11/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package libopenusb dpkg-buildpackage: info: source version 1.1.11-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Simon Richter dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean --with autotools-dev --parallel dh: The autotools-dev sequence is deprecated and replaced by dh in debhelper (>= 9.20160115) dh: This feature will be removed in compat 12. dh_auto_clean -O--parallel dh_autotools-dev_restoreconfig -O--parallel dh_autotools-dev_restoreconfig: dh_autotools-dev_restoreconfig is deprecated; please see dh_autotools-dev_restoreconfig(1) for a replacement dh_autotools-dev_restoreconfig: This feature will be removed in compat 12. dh_clean -O--parallel debian/rules build dh build --with autotools-dev --parallel dh: The autotools-dev sequence is deprecated and replaced by dh in debhelper (>= 9.20160115) dh: This feature will be removed in compat 12. dh_update_autotools_config -O--parallel dh_autotools-dev_updateconfig -O--parallel dh_autotools-dev_updateconfig: dh_autotools-dev_updateconfig is deprecated; please see dh_autotools-dev_updateconfig(1) for a replacement dh_autotools-dev_updateconfig: This feature will be removed in compat 12. dh_auto_configure -O--parallel ./configure --build=arm-linux-gnueabihf --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-silent-rules --libdir=\${prefix}/lib/arm-linux-gnueabihf --libexecdir=\${prefix}/lib/arm-linux-gnueabihf --disable-maintainer-mode --disable-dependency-tracking configure: WARNING: unrecognized options: --disable-silent-rules checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking build system type... arm-unknown-linux-gnueabihf checking host system type... arm-unknown-linux-gnueabihf checking how to print strings... printf checking for style of include used by make... GNU checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... none checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert arm-unknown-linux-gnueabihf file names to arm-unknown-linux-gnueabihf format... func_convert_file_noop checking how to convert arm-unknown-linux-gnueabihf file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for what USB OS support... Linux checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) none checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) none checking for ANSI C header files... (cached) yes checking for vprintf... yes checking for _doprnt... no checking size of char... 1 checking size of short... 2 checking size of long... 4 checking size of int... 4 checking size of void *... 4 checking size of long long... 8 checking for an ANSI C-conforming const... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking for unistd.h... (cached) yes checking values.h usability... yes checking values.h presence... yes checking for values.h... yes checking for memmove... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for LIBUSB... yes checking for UDEV... yes checking if we should build the documentation... auto checking for jade... no checking for openjade... openjade configure: creating ./config.status config.status: creating Makefile config.status: creating doc/Makefile config.status: creating src/Makefile config.status: creating tests/Makefile config.status: creating src/openusb.h config.status: creating openusb.spec config.status: creating openusb-config config.status: creating README config.status: creating INSTALL.openusb config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands config.status: executing default commands configure: WARNING: unrecognized options: --disable-silent-rules debian/rules override_dh_auto_build make[1]: Entering directory '/build/libopenusb-1.1.11' make -C doc clean make[2]: Entering directory '/build/libopenusb-1.1.11/doc' test -z "manual.dvi manual.aux manual.tex manual.log manual.ps.gz; rm -rf html" || rm -f manual.dvi manual.aux manual.tex manual.log manual.ps.gz; rm -rf html rm -rf .libs _libs rm -f *.lo make[2]: Leaving directory '/build/libopenusb-1.1.11/doc' dh_auto_build --parallel -- XMLDCL=/usr/share/xml/declaration/xml.dcl make -j3 XMLDCL=/usr/share/xml/declaration/xml.dcl make[2]: Entering directory '/build/libopenusb-1.1.11' make all-recursive make[3]: Entering directory '/build/libopenusb-1.1.11' Making all in src make[4]: Entering directory '/build/libopenusb-1.1.11/src' /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -DDRIVER_PATH=\"/usr/lib/arm-linux-gnueabihf/openusb_backend\" -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c -o libopenusb_la-usb.lo `test -f 'usb.c' || echo './'`usb.c /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -DDRIVER_PATH=\"/usr/lib/arm-linux-gnueabihf/openusb_backend\" -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c -o libopenusb_la-devices.lo `test -f 'devices.c' || echo './'`devices.c /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -DDRIVER_PATH=\"/usr/lib/arm-linux-gnueabihf/openusb_backend\" -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c -o libopenusb_la-list.lo `test -f 'list.c' || echo './'`list.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -DDRIVER_PATH=\"/usr/lib/arm-linux-gnueabihf/openusb_backend\" -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c usb.c -fPIC -DPIC -o .libs/libopenusb_la-usb.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -DDRIVER_PATH=\"/usr/lib/arm-linux-gnueabihf/openusb_backend\" -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c list.c -fPIC -DPIC -o .libs/libopenusb_la-list.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -DDRIVER_PATH=\"/usr/lib/arm-linux-gnueabihf/openusb_backend\" -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c devices.c -fPIC -DPIC -o .libs/libopenusb_la-devices.o usb.c: In function 'openusb_abort': usb.c:1091:8: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] write(hdev->event_pipe[1],buf, 1); /* wake up timeout thread */ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ usb.c: In function 'timeout_thread': usb.c:1326:4: warning: ignoring return value of 'read', declared with attribute warn_unused_result [-Wunused-result] read(devh->event_pipe[0], buf, sizeof(buf)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ devices.c:63:13: warning: 'usbi_remove_bus' defined but not used [-Wunused-function] static void usbi_remove_bus(struct usbi_bus *ibus) ^~~~~~~~~~~~~~~ libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -DDRIVER_PATH=\"/usr/lib/arm-linux-gnueabihf/openusb_backend\" -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c list.c -o libopenusb_la-list.o >/dev/null 2>&1 /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -DDRIVER_PATH=\"/usr/lib/arm-linux-gnueabihf/openusb_backend\" -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c -o libopenusb_la-descriptors.lo `test -f 'descriptors.c' || echo './'`descriptors.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -DDRIVER_PATH=\"/usr/lib/arm-linux-gnueabihf/openusb_backend\" -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c descriptors.c -fPIC -DPIC -o .libs/libopenusb_la-descriptors.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -DDRIVER_PATH=\"/usr/lib/arm-linux-gnueabihf/openusb_backend\" -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c usb.c -o libopenusb_la-usb.o >/dev/null 2>&1 libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -DDRIVER_PATH=\"/usr/lib/arm-linux-gnueabihf/openusb_backend\" -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c devices.c -o libopenusb_la-devices.o >/dev/null 2>&1 libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -DDRIVER_PATH=\"/usr/lib/arm-linux-gnueabihf/openusb_backend\" -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c descriptors.c -o libopenusb_la-descriptors.o >/dev/null 2>&1 /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -DDRIVER_PATH=\"/usr/lib/arm-linux-gnueabihf/openusb_backend\" -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c -o libopenusb_la-api.lo `test -f 'api.c' || echo './'`api.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -DDRIVER_PATH=\"/usr/lib/arm-linux-gnueabihf/openusb_backend\" -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c api.c -fPIC -DPIC -o .libs/libopenusb_la-api.o api.c: In function 'openusb_xfer_aio': api.c:777:22: warning: variable 'plib' set but not used [-Wunused-but-set-variable] struct usbi_handle *plib; ^~~~ api.c: In function 'process_multi_request': api.c:1183:10: warning: variable 'endpoint' set but not used [-Wunused-but-set-variable] uint8_t endpoint; ^~~~~~~~ api.c:1182:10: warning: variable 'ifc' set but not used [-Wunused-but-set-variable] uint8_t ifc; ^~~ api.c: In function 'openusb_start': api.c:1404:26: warning: variable 'type' set but not used [-Wunused-but-set-variable] openusb_transfer_type_t type; ^~~~ api.c:1403:10: warning: variable 'endpoint' set but not used [-Wunused-but-set-variable] uint8_t endpoint; ^~~~~~~~ api.c:1402:10: warning: variable 'ifc' set but not used [-Wunused-but-set-variable] uint8_t ifc; ^~~ At top level: api.c:1513:16: warning: 'openusb_add' defined but not used [-Wunused-function] static int32_t openusb_add(openusb_multi_request_handle_t handle) ^~~~~~~~~~~ /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -DDRIVER_PATH=\"/usr/lib/arm-linux-gnueabihf/openusb_backend\" -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c -o libopenusb_la-io.lo `test -f 'io.c' || echo './'`io.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -DDRIVER_PATH=\"/usr/lib/arm-linux-gnueabihf/openusb_backend\" -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c io.c -fPIC -DPIC -o .libs/libopenusb_la-io.o /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -DDRIVER_PATH=\"/usr/lib/arm-linux-gnueabihf/openusb_backend\" -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c -o libopenusb_la-emulation.lo `test -f 'emulation.c' || echo './'`emulation.c io.c: In function 'io_submit': io.c:421:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] int ret; ^~~ io.c: In function 'usbi_alloc_io': io.c:86:3: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] write(dev->event_pipe[1],buf, 1); /* notify timeout thread */ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ io.c: In function 'usbi_free_io': io.c:123:3: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] write(io->dev->event_pipe[1],buf, 1); /* notify timeout thread */ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -DDRIVER_PATH=\"/usr/lib/arm-linux-gnueabihf/openusb_backend\" -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c emulation.c -fPIC -DPIC -o .libs/libopenusb_la-emulation.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -DDRIVER_PATH=\"/usr/lib/arm-linux-gnueabihf/openusb_backend\" -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c io.c -o libopenusb_la-io.o >/dev/null 2>&1 libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -DDRIVER_PATH=\"/usr/lib/arm-linux-gnueabihf/openusb_backend\" -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c api.c -o libopenusb_la-api.o >/dev/null 2>&1 /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c -o linux_la-linux.lo `test -f 'linux.c' || echo './'`linux.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c linux.c -fPIC -DPIC -o .libs/linux_la-linux.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -DDRIVER_PATH=\"/usr/lib/arm-linux-gnueabihf/openusb_backend\" -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c emulation.c -o libopenusb_la-emulation.o >/dev/null 2>&1 linux.c:520:16: warning: 'linux_clear_halt' defined but not used [-Wunused-function] static int32_t linux_clear_halt(struct usbi_dev_handle *hdev, uint8_t ept) ^~~~~~~~~~~~~~~~ linux.c: In function 'linux_find_buses': linux.c:725:56: warning: '%s' directive output may be truncated writing up to 255 bytes into a region of size between 0 and 4096 [-Wformat-truncation=] snprintf(ibus->sys_path, sizeof(ibus->sys_path), "%s/%s", ^~ In file included from /usr/include/stdio.h:873, from linux.c:14: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 2 and 4353 bytes into a destination of size 4097 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /bin/bash ../libtool --tag=CC --mode=link gcc -DDRIVER_PATH=\"/usr/lib/arm-linux-gnueabihf/openusb_backend\" -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -version-info 0:11:0 -export-dynamic -lpthread -Wl,-z,relro -o libopenusb.la -rpath /usr/lib/arm-linux-gnueabihf libopenusb_la-usb.lo libopenusb_la-devices.lo libopenusb_la-list.lo libopenusb_la-descriptors.lo libopenusb_la-api.lo libopenusb_la-io.lo libopenusb_la-emulation.lo -ldl libtool: link: gcc -shared -fPIC -DPIC .libs/libopenusb_la-usb.o .libs/libopenusb_la-devices.o .libs/libopenusb_la-list.o .libs/libopenusb_la-descriptors.o .libs/libopenusb_la-api.o .libs/libopenusb_la-io.o .libs/libopenusb_la-emulation.o -lpthread -ldl -O2 -Wl,-z -Wl,relro -Wl,-soname -Wl,libopenusb.so.0 -o .libs/libopenusb.so.0.0.11 linux.c: In function 'create_new_device': linux.c:1927:58: warning: '/' directive output may be truncated writing 1 byte into a region of size between 0 and 4096 [-Wformat-truncation=] snprintf(idev->sys_path, sizeof(idev->sys_path) - 1, "%s/%03d", ^ linux.c:1927:55: note: directive argument in the range [0, 65535] snprintf(idev->sys_path, sizeof(idev->sys_path) - 1, "%s/%03d", ^~~~~~~~~ In file included from /usr/include/stdio.h:873, from linux.c:14: /usr/include/arm-linux-gnueabihf/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output between 5 and 4103 bytes into a destination of size 4096 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libtool: link: (cd ".libs" && rm -f "libopenusb.so.0" && ln -s "libopenusb.so.0.0.11" "libopenusb.so.0") libtool: link: (cd ".libs" && rm -f "libopenusb.so" && ln -s "libopenusb.so.0.0.11" "libopenusb.so") libtool: link: ar cru .libs/libopenusb.a libopenusb_la-usb.o libopenusb_la-devices.o libopenusb_la-list.o libopenusb_la-descriptors.o libopenusb_la-api.o libopenusb_la-io.o libopenusb_la-emulation.o ar: `u' modifier ignored since `D' is the default (see `U') libtool: link: ranlib .libs/libopenusb.a libtool: link: ( cd ".libs" && rm -f "libopenusb.la" && ln -s "../libopenusb.la" "libopenusb.la" ) libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c linux.c -o linux_la-linux.o >/dev/null 2>&1 /bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -avoid-version -module -L.libs -Wl,-z,relro -o linux.la -rpath /usr/lib/arm-linux-gnueabihf/openusb_backend linux_la-linux.lo -lopenusb -ludev libtool: link: gcc -shared -fPIC -DPIC .libs/linux_la-linux.o -Wl,-rpath -Wl,/build/libopenusb-1.1.11/src/.libs -L.libs /build/libopenusb-1.1.11/src/.libs/libopenusb.so -lpthread -ldl -ludev -O2 -Wl,-z -Wl,relro -Wl,-soname -Wl,linux.so -o .libs/linux.so libtool: link: ar cru .libs/linux.a linux_la-linux.o ar: `u' modifier ignored since `D' is the default (see `U') libtool: link: ranlib .libs/linux.a libtool: link: ( cd ".libs" && rm -f "linux.la" && ln -s "../linux.la" "linux.la" ) make[4]: Leaving directory '/build/libopenusb-1.1.11/src' Making all in tests make[4]: Entering directory '/build/libopenusb-1.1.11/tests' gcc -DHAVE_CONFIG_H -I. -I.. -I../src -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -c testopenusb.c testopenusb.c: In function 'test_isoc_sync': testopenusb.c:498:16: warning: variable 'bulkdata' set but not used [-Wunused-but-set-variable] unsigned char bulkdata[ISOC_PKT_NUM*ISOC_PKT_LEN]; ^~~~~~~~ testopenusb.c: In function 'async_xfer_ctrl_test': testopenusb.c:576:16: warning: variable 'bulkdata' set but not used [-Wunused-but-set-variable] unsigned char bulkdata[BULK_DATA_LEN]; ^~~~~~~~ /bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Wl,-z,relro -o testopenusb testopenusb.o ../src/libopenusb.la -lopenusb libtool: link: gcc -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -Wl,-z -Wl,relro -o .libs/testopenusb testopenusb.o ../src/.libs/libopenusb.so -lpthread -ldl make[4]: Leaving directory '/build/libopenusb-1.1.11/tests' Making all in doc make[4]: Entering directory '/build/libopenusb-1.1.11/doc' mkdir -p html mkdir -p html openjade -t xml -d website.dsl\#html /usr/share/xml/declaration/xml.dcl manual.xml openjade -V nochunks -t xml -d website.dsl\#html /usr/share/xml/declaration/xml.dcl manual.xml > html/openusb_guide.html make[4]: Leaving directory '/build/libopenusb-1.1.11/doc' make[4]: Entering directory '/build/libopenusb-1.1.11' make[4]: Leaving directory '/build/libopenusb-1.1.11' make[3]: Leaving directory '/build/libopenusb-1.1.11' make[2]: Leaving directory '/build/libopenusb-1.1.11' make[1]: Leaving directory '/build/libopenusb-1.1.11' dh_auto_test -O--parallel make -j3 check VERBOSE=1 make[1]: Entering directory '/build/libopenusb-1.1.11' make check-recursive make[2]: Entering directory '/build/libopenusb-1.1.11' Making check in src make[3]: Entering directory '/build/libopenusb-1.1.11/src' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/build/libopenusb-1.1.11/src' Making check in tests make[3]: Entering directory '/build/libopenusb-1.1.11/tests' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/build/libopenusb-1.1.11/tests' Making check in doc make[3]: Entering directory '/build/libopenusb-1.1.11/doc' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/build/libopenusb-1.1.11/doc' make[3]: Entering directory '/build/libopenusb-1.1.11' make[3]: Leaving directory '/build/libopenusb-1.1.11' make[2]: Leaving directory '/build/libopenusb-1.1.11' make[1]: Leaving directory '/build/libopenusb-1.1.11' fakeroot debian/rules binary dh binary --with autotools-dev --parallel dh: The autotools-dev sequence is deprecated and replaced by dh in debhelper (>= 9.20160115) dh: This feature will be removed in compat 12. dh_testroot -O--parallel dh_prep -O--parallel dh_auto_install -O--parallel make -j1 install DESTDIR=/build/libopenusb-1.1.11/debian/tmp AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/libopenusb-1.1.11' make install-recursive make[2]: Entering directory '/build/libopenusb-1.1.11' Making install in src make[3]: Entering directory '/build/libopenusb-1.1.11/src' make[4]: Entering directory '/build/libopenusb-1.1.11/src' test -z "/usr/lib/arm-linux-gnueabihf" || /bin/mkdir -p "/build/libopenusb-1.1.11/debian/tmp/usr/lib/arm-linux-gnueabihf" /bin/bash ../libtool --mode=install /usr/bin/install -c libopenusb.la '/build/libopenusb-1.1.11/debian/tmp/usr/lib/arm-linux-gnueabihf' libtool: install: /usr/bin/install -c .libs/libopenusb.so.0.0.11 /build/libopenusb-1.1.11/debian/tmp/usr/lib/arm-linux-gnueabihf/libopenusb.so.0.0.11 libtool: install: (cd /build/libopenusb-1.1.11/debian/tmp/usr/lib/arm-linux-gnueabihf && { ln -s -f libopenusb.so.0.0.11 libopenusb.so.0 || { rm -f libopenusb.so.0 && ln -s libopenusb.so.0.0.11 libopenusb.so.0; }; }) libtool: install: (cd /build/libopenusb-1.1.11/debian/tmp/usr/lib/arm-linux-gnueabihf && { ln -s -f libopenusb.so.0.0.11 libopenusb.so || { rm -f libopenusb.so && ln -s libopenusb.so.0.0.11 libopenusb.so; }; }) libtool: install: /usr/bin/install -c .libs/libopenusb.lai /build/libopenusb-1.1.11/debian/tmp/usr/lib/arm-linux-gnueabihf/libopenusb.la libtool: install: /usr/bin/install -c .libs/libopenusb.a /build/libopenusb-1.1.11/debian/tmp/usr/lib/arm-linux-gnueabihf/libopenusb.a libtool: install: chmod 644 /build/libopenusb-1.1.11/debian/tmp/usr/lib/arm-linux-gnueabihf/libopenusb.a libtool: install: ranlib /build/libopenusb-1.1.11/debian/tmp/usr/lib/arm-linux-gnueabihf/libopenusb.a libtool: install: warning: remember to run `libtool --finish /usr/lib/arm-linux-gnueabihf' test -z "/usr/include" || /bin/mkdir -p "/build/libopenusb-1.1.11/debian/tmp/usr/include" /usr/bin/install -c -m 644 openusb.h '/build/libopenusb-1.1.11/debian/tmp/usr/include' test -z "/usr/lib/arm-linux-gnueabihf/openusb_backend" || /bin/mkdir -p "/build/libopenusb-1.1.11/debian/tmp/usr/lib/arm-linux-gnueabihf/openusb_backend" /bin/bash ../libtool --mode=install /usr/bin/install -c linux.la '/build/libopenusb-1.1.11/debian/tmp/usr/lib/arm-linux-gnueabihf/openusb_backend' libtool: install: warning: relinking `linux.la' libtool: install: (cd /build/libopenusb-1.1.11/src; /bin/bash /build/libopenusb-1.1.11/libtool --tag CC --mode=relink gcc -g -O2 -ffile-prefix-map=/build/libopenusb-1.1.11=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -avoid-version -module -L.libs -Wl,-z,relro -o linux.la -rpath /usr/lib/arm-linux-gnueabihf/openusb_backend linux_la-linux.lo -lopenusb -ludev -inst-prefix-dir /build/libopenusb-1.1.11/debian/tmp) libtool: relink: gcc -shared -fPIC -DPIC .libs/linux_la-linux.o -L.libs -L/build/libopenusb-1.1.11/debian/tmp/usr/lib/arm-linux-gnueabihf -L/usr/lib/arm-linux-gnueabihf -lopenusb -lpthread -ldl -ludev -O2 -Wl,-z -Wl,relro -Wl,-soname -Wl,linux.so -o .libs/linux.so libtool: install: /usr/bin/install -c .libs/linux.soT /build/libopenusb-1.1.11/debian/tmp/usr/lib/arm-linux-gnueabihf/openusb_backend/linux.so libtool: install: /usr/bin/install -c .libs/linux.lai /build/libopenusb-1.1.11/debian/tmp/usr/lib/arm-linux-gnueabihf/openusb_backend/linux.la libtool: install: /usr/bin/install -c .libs/linux.a /build/libopenusb-1.1.11/debian/tmp/usr/lib/arm-linux-gnueabihf/openusb_backend/linux.a libtool: install: chmod 644 /build/libopenusb-1.1.11/debian/tmp/usr/lib/arm-linux-gnueabihf/openusb_backend/linux.a libtool: install: ranlib /build/libopenusb-1.1.11/debian/tmp/usr/lib/arm-linux-gnueabihf/openusb_backend/linux.a libtool: install: warning: remember to run `libtool --finish /usr/lib/arm-linux-gnueabihf/openusb_backend' make[4]: Leaving directory '/build/libopenusb-1.1.11/src' make[3]: Leaving directory '/build/libopenusb-1.1.11/src' Making install in tests make[3]: Entering directory '/build/libopenusb-1.1.11/tests' make[4]: Entering directory '/build/libopenusb-1.1.11/tests' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/libopenusb-1.1.11/tests' make[3]: Leaving directory '/build/libopenusb-1.1.11/tests' Making install in doc make[3]: Entering directory '/build/libopenusb-1.1.11/doc' make[4]: Entering directory '/build/libopenusb-1.1.11/doc' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/libopenusb-1.1.11/doc' make[3]: Leaving directory '/build/libopenusb-1.1.11/doc' make[3]: Entering directory '/build/libopenusb-1.1.11' make[4]: Entering directory '/build/libopenusb-1.1.11' test -z "/usr/bin" || /bin/mkdir -p "/build/libopenusb-1.1.11/debian/tmp/usr/bin" /usr/bin/install -c openusb-config '/build/libopenusb-1.1.11/debian/tmp/usr/bin' make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/libopenusb-1.1.11' make[3]: Leaving directory '/build/libopenusb-1.1.11' make[2]: Leaving directory '/build/libopenusb-1.1.11' make[1]: Leaving directory '/build/libopenusb-1.1.11' dh_install -O--parallel dh_installdocs -O--parallel dh_installchangelogs -O--parallel dh_installinit -O--parallel dh_perl -O--parallel dh_link -O--parallel dh_strip_nondeterminism -O--parallel dh_compress -O--parallel dh_fixperms -O--parallel dh_missing -O--parallel dh_strip -O--parallel dh_makeshlibs -O--parallel dh_shlibdeps -O--parallel dh_installdeb -O--parallel dh_gencontrol -O--parallel dh_md5sums -O--parallel dh_builddeb -O--parallel dpkg-deb: building package 'libopenusb0-dbgsym' in '../libopenusb0-dbgsym_1.1.11-2_armhf.deb'. dpkg-deb: building package 'libopenusb-dev' in '../libopenusb-dev_1.1.11-2_armhf.deb'. dpkg-deb: building package 'libopenusb-doc' in '../libopenusb-doc_1.1.11-2_all.deb'. dpkg-deb: building package 'libopenusb0' in '../libopenusb0_1.1.11-2_armhf.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libopenusb_1.1.11-2_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/2762 and its subdirectories I: Current time: Thu May 28 16:51:39 -12 2020 I: pbuilder-time-stamp: 1590727900 Fri May 29 04:51:50 UTC 2020 I: 1st build successful. Starting 2nd build on remote node cb3a-armhf-rb.debian.net. Fri May 29 04:51:50 UTC 2020 I: Preparing to do remote build '2' on cb3a-armhf-rb.debian.net. Fri May 29 05:39:52 UTC 2020 I: Deleting $TMPDIR on cb3a-armhf-rb.debian.net. Fri May 29 05:39:55 UTC 2020 I: libopenusb_1.1.11-2_armhf.changes: Format: 1.8 Date: Wed, 02 Aug 2017 23:43:39 +0200 Source: libopenusb Binary: libopenusb-dev libopenusb-doc libopenusb0 libopenusb0-dbgsym Architecture: armhf all Version: 1.1.11-2 Distribution: unstable Urgency: medium Maintainer: Simon Richter Changed-By: Simon Richter Description: libopenusb-dev - alternative userspace USB programming library libopenusb-doc - alternative userspace USB programming library libopenusb0 - alternative userspace USB programming library Closes: 870545 Changes: libopenusb (1.1.11-2) unstable; urgency=medium . * Drop hardcoded Pre-Depends on multiarch-support for buster (Closes: #870545) Checksums-Sha1: caa720e58ace4d34743189e3180ea08fa5439613 86960 libopenusb-dev_1.1.11-2_armhf.deb 0f57806b1cc03e439d455084b00cc2547270b8b1 23244 libopenusb-doc_1.1.11-2_all.deb 93903ef726dc26f9833371dc189d057247733f5f 132012 libopenusb0-dbgsym_1.1.11-2_armhf.deb 2e4c398ad7fa09e0078525180ac4bde699c83806 42088 libopenusb0_1.1.11-2_armhf.deb 847f4b1e63f08ea4f3d7af4819e2c8b0c2640b74 6545 libopenusb_1.1.11-2_armhf.buildinfo Checksums-Sha256: afe671a52de0c772338f9a74b63af52ff4f8e8558ddc553abe72f24c812af2ba 86960 libopenusb-dev_1.1.11-2_armhf.deb b2e82eb795c19fcc084a86b468c50120943ccb7b2aa5bc3a297c9a9ecd60e526 23244 libopenusb-doc_1.1.11-2_all.deb c2d22e46cb73eadb4acbf28f535c36da4ee51e48a5714cf549e0ed2838680dd5 132012 libopenusb0-dbgsym_1.1.11-2_armhf.deb 828dd669c689705d9ea3dc0d8d87836d765c927ddc6784ff5882cc6de7a14c61 42088 libopenusb0_1.1.11-2_armhf.deb 3b734b9a613e5bef59b1d0bd98008b1038c15bb765a69c049e5cb14334c63e59 6545 libopenusb_1.1.11-2_armhf.buildinfo Files: b97006a064be4b24b2460d9280ca9b0a 86960 libdevel extra libopenusb-dev_1.1.11-2_armhf.deb 0baeb31b8adc0fab2d726e30049b415f 23244 doc extra libopenusb-doc_1.1.11-2_all.deb 3560c75ba979c3133e3f41708fea1f73 132012 debug optional libopenusb0-dbgsym_1.1.11-2_armhf.deb b55955af130b23247aa732927e259702 42088 libs extra libopenusb0_1.1.11-2_armhf.deb aee00c3b3bbe8f55b90e4dbb4dbe37ab 6545 libs extra libopenusb_1.1.11-2_armhf.buildinfo Fri May 29 05:39:57 UTC 2020 I: diffoscope 145 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.vnUo2ISX4Y/libopenusb_1.1.11-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.vnUo2ISX4Y/libopenusb_1.1.11-2.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.vnUo2ISX4Y/libopenusb_1.1.11-2.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.vnUo2ISX4Y/b1/libopenusb_1.1.11-2_armhf.changes /srv/reproducible-results/rbuild-debian/tmp.vnUo2ISX4Y/b2/libopenusb_1.1.11-2_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.286s) 0.286s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.066s) 0.066s 10 calls diffoscope.comparators.binary.FilesystemFile Fri May 29 05:40:00 UTC 2020 I: diffoscope 145 found no differences in the changes files, and a .buildinfo file also exists. Fri May 29 05:40:00 UTC 2020 I: libopenusb from buster built successfully and reproducibly on armhf. Fri May 29 05:40:02 UTC 2020 I: Submitting .buildinfo files to external archives: Fri May 29 05:40:02 UTC 2020 I: Submitting 8.0K b1/libopenusb_1.1.11-2_armhf.buildinfo.asc Fri May 29 05:40:04 UTC 2020 I: Submitting 8.0K b2/libopenusb_1.1.11-2_armhf.buildinfo.asc Fri May 29 05:40:05 UTC 2020 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri May 29 05:40:05 UTC 2020 I: Done submitting .buildinfo files. Fri May 29 05:40:05 UTC 2020 I: Removing signed libopenusb_1.1.11-2_armhf.buildinfo.asc files: removed './b1/libopenusb_1.1.11-2_armhf.buildinfo.asc' removed './b2/libopenusb_1.1.11-2_armhf.buildinfo.asc'