Wed Feb 26 08:55:22 UTC 2020 I: starting to build libconfig-tiny-perl/buster/i386 on jenkins on '2020-02-26 08:55' Wed Feb 26 08:55:22 UTC 2020 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_12/1188/console.log Wed Feb 26 08:55:22 UTC 2020 I: Downloading source for buster/libconfig-tiny-perl=2.23-1 --2020-02-26 08:55:22-- http://deb.debian.org/debian/pool/main/libc/libconfig-tiny-perl/libconfig-tiny-perl_2.23-1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2242 (2.2K) Saving to: ‘libconfig-tiny-perl_2.23-1.dsc’ 0K .. 100% 85.1K=0.03s 2020-02-26 08:55:22 (85.1 KB/s) - ‘libconfig-tiny-perl_2.23-1.dsc’ saved [2242/2242] Wed Feb 26 08:55:23 UTC 2020 I: libconfig-tiny-perl_2.23-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libconfig-tiny-perl Binary: libconfig-tiny-perl Architecture: all Version: 2.23-1 Maintainer: Debian Perl Group Uploaders: Dominic Hargreaves Homepage: https://metacpan.org/release/Config-Tiny Standards-Version: 3.9.6 Vcs-Browser: https://anonscm.debian.org/cgit/pkg-perl/packages/libconfig-tiny-perl.git Vcs-Git: git://anonscm.debian.org/pkg-perl/packages/libconfig-tiny-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper (>= 9) Build-Depends-Indep: perl, libtest-pod-perl (>= 1.45) Package-List: libconfig-tiny-perl deb perl optional arch=all Checksums-Sha1: 8fca9f846cd16cfd3f2a7e0599a9dc6df6f3a92f 20487 libconfig-tiny-perl_2.23.orig.tar.gz b2dd4b046a08dec73e484adc1682475be3dbb17e 2656 libconfig-tiny-perl_2.23-1.debian.tar.xz Checksums-Sha256: 9a8a66e3ed420cbc6585c43abeff788368309a46355cf69a64c2a47e1911e50c 20487 libconfig-tiny-perl_2.23.orig.tar.gz d571d88e135ef2e17e275970a5cb5ff3845826e245126a89fab3528dbbcaf3c6 2656 libconfig-tiny-perl_2.23-1.debian.tar.xz Files: 6c3bc610c4bc587e1441e651e01584ce 20487 libconfig-tiny-perl_2.23.orig.tar.gz f4265bf955d180c67860ceaf743cffc3 2656 libconfig-tiny-perl_2.23-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQJ8BAEBCgBmBQJWIp15XxSAAAAAAC4AKGlzc3Vlci1mcHJAbm90YXRpb25zLm9w ZW5wZ3AuZmlmdGhob3JzZW1hbi5uZXREMUUxMzE2RTkzQTc2MEE4MTA0RDg1RkFC QjNBNjgwMTg2NDlBQTA2AAoJELs6aAGGSaoGeigP/RX0z4UVIjnZbkBzvu/Jd6N9 pEmBk8sT07x1+rpx6BhGhU7coh4/UtH6Walpn27FrFiPPrlj2FonAbchbb37dzj3 RXtSIQDMw6O5Vw+YHQ9PP+dr0beM8vNkA5G2bgGXb84mImG+s/eDrQ3HM6lvXX/0 BRuoSePJiozD3iV603kXmPFj13goHpih//8etKHg0lPKVBrQBwDANHTY2H6nIcHv 4Wtb6WDcMvHawAmo60ApN+O42wcze5VM+57OrLucx2Yg+/E8/DLkuRYaE9seogDY MM8KOvOIhEeLyMEmpCSbdpLEhsgJzGhamcZcMExIRCq6JBfWV0l+ipI49Dv8x6la +cZkt1fVcM1tjruBaBgn2yFThLSt+Zm/IMscwAv9z6J8DHXmDrr7p6jeNLHKxwFw qfA+ObPQ9Gie5xpzX+68+unTpdaR27Jt9/j/Ym0FU0bURkJaaI36wkFSgBLI/nPB N9U3AhvSpj8VZEw9L+fuXpEILZBB8HMvX9CEbA4N5945lNkGDSJYjnTm/i4K5wPD Cuwlki6fQMIi+drDhP6A/VkzzENy08qPGvSg0DFrr+QbJSgLeSoklPNTtzVf6Tsr 69+AgMqHVn6vQWUwX5xV3xJzPgf5skytEPWkYhI6Vu39nDQhkD+zmFuBdspqX35v xOZkz1rOfPl4pZBJ7RIc =jS7G -----END PGP SIGNATURE----- Wed Feb 26 08:55:23 UTC 2020 I: Checking whether the package is not for us Wed Feb 26 08:55:23 UTC 2020 I: Starting 1st build on remote node profitbricks-build16-i386.debian.net. Wed Feb 26 08:55:23 UTC 2020 I: Preparing to do remote build '1' on profitbricks-build16-i386.debian.net. Wed Feb 26 08:55:39 UTC 2020 I: Deleting $TMPDIR on profitbricks-build16-i386.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Tue Mar 30 03:18:23 -12 2021 I: pbuilder-time-stamp: 1617117503 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [libconfig-tiny-perl_2.23-1.dsc] I: copying [./libconfig-tiny-perl_2.23.orig.tar.gz] I: copying [./libconfig-tiny-perl_2.23-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Sat Oct 17 07:11:53 2015 -12 gpgv: using RSA key BB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libconfig-tiny-perl_2.23-1.dsc dpkg-source: info: extracting libconfig-tiny-perl in libconfig-tiny-perl-2.23 dpkg-source: info: unpacking libconfig-tiny-perl_2.23.orig.tar.gz dpkg-source: info: unpacking libconfig-tiny-perl_2.23-1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 9), perl, libtest-pod-perl (>= 1.45) dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19231 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 9); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl (>= 1.45); however: Package libtest-pod-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbsd0{a} libcroco3{a} libelf1{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libncurses6{a} libpipeline1{a} libsigsegv2{a} libtest-pod-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libglib2.0-data libgpm2 libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 34 newly installed, 0 to remove and 0 not upgraded. Need to get 19.4 MB of archives. After unpacking 70.3 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main i386 libbsd0 i386 0.9.1-2 [104 kB] Get: 2 http://deb.debian.org/debian buster/main i386 bsdmainutils i386 11.1.2+b1 [193 kB] Get: 3 http://deb.debian.org/debian buster/main i386 libuchardet0 i386 0.0.6-3 [65.2 kB] Get: 4 http://deb.debian.org/debian buster/main i386 groff-base i386 1.22.4-3 [935 kB] Get: 5 http://deb.debian.org/debian buster/main i386 libpipeline1 i386 1.5.1-2 [33.3 kB] Get: 6 http://deb.debian.org/debian buster/main i386 man-db i386 2.8.5-2 [1284 kB] Get: 7 http://deb.debian.org/debian buster/main i386 sensible-utils all 0.0.12 [15.8 kB] Get: 8 http://deb.debian.org/debian buster/main i386 libmagic-mgc i386 1:5.35-4+deb10u1 [242 kB] Get: 9 http://deb.debian.org/debian buster/main i386 libmagic1 i386 1:5.35-4+deb10u1 [124 kB] Get: 10 http://deb.debian.org/debian buster/main i386 file i386 1:5.35-4+deb10u1 [66.3 kB] Get: 11 http://deb.debian.org/debian buster/main i386 gettext-base i386 0.19.8.1-9 [124 kB] Get: 12 http://deb.debian.org/debian buster/main i386 libsigsegv2 i386 2.12-2 [33.2 kB] Get: 13 http://deb.debian.org/debian buster/main i386 m4 i386 1.4.18-2 [205 kB] Get: 14 http://deb.debian.org/debian buster/main i386 autoconf all 2.69-11 [341 kB] Get: 15 http://deb.debian.org/debian buster/main i386 autotools-dev all 20180224.1 [77.0 kB] Get: 16 http://deb.debian.org/debian buster/main i386 automake all 1:1.16.1-4 [771 kB] Get: 17 http://deb.debian.org/debian buster/main i386 autopoint all 0.19.8.1-9 [434 kB] Get: 18 http://deb.debian.org/debian buster/main i386 libtool all 2.4.6-9 [547 kB] Get: 19 http://deb.debian.org/debian buster/main i386 dh-autoreconf all 19 [16.9 kB] Get: 20 http://deb.debian.org/debian buster/main i386 libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 21 http://deb.debian.org/debian buster/main i386 libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 22 http://deb.debian.org/debian buster/main i386 dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 23 http://deb.debian.org/debian buster/main i386 libelf1 i386 0.176-1.1 [166 kB] Get: 24 http://deb.debian.org/debian buster/main i386 dwz i386 0.12-3 [81.4 kB] Get: 25 http://deb.debian.org/debian buster/main i386 libglib2.0-0 i386 2.58.3-2+deb10u2 [1334 kB] Get: 26 http://deb.debian.org/debian buster/main i386 libicu63 i386 63.1-6 [8443 kB] Get: 27 http://deb.debian.org/debian buster/main i386 libxml2 i386 2.9.4+dfsg1-7+b3 [721 kB] Get: 28 http://deb.debian.org/debian buster/main i386 libcroco3 i386 0.6.12-3 [151 kB] Get: 29 http://deb.debian.org/debian buster/main i386 libncurses6 i386 6.1+20181013-2+deb10u2 [109 kB] Get: 30 http://deb.debian.org/debian buster/main i386 gettext i386 0.19.8.1-9 [1314 kB] Get: 31 http://deb.debian.org/debian buster/main i386 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 32 http://deb.debian.org/debian buster/main i386 po-debconf all 1.0.21 [248 kB] Get: 33 http://deb.debian.org/debian buster/main i386 debhelper all 12.1.1 [1016 kB] Get: 34 http://deb.debian.org/debian buster/main i386 libtest-pod-perl all 1.52-1 [14.2 kB] Fetched 19.4 MB in 0s (91.8 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:i386. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19231 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_i386.deb ... Unpacking libbsd0:i386 (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_i386.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../02-libuchardet0_0.0.6-3_i386.deb ... Unpacking libuchardet0:i386 (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_i386.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../04-libpipeline1_1.5.1-2_i386.deb ... Unpacking libpipeline1:i386 (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_i386.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../06-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../07-libmagic-mgc_1%3a5.35-4+deb10u1_i386.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:i386. Preparing to unpack .../08-libmagic1_1%3a5.35-4+deb10u1_i386.deb ... Unpacking libmagic1:i386 (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../09-file_1%3a5.35-4+deb10u1_i386.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../10-gettext-base_0.19.8.1-9_i386.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:i386. Preparing to unpack .../11-libsigsegv2_2.12-2_i386.deb ... Unpacking libsigsegv2:i386 (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-2_i386.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:i386. Preparing to unpack .../22-libelf1_0.176-1.1_i386.deb ... Unpacking libelf1:i386 (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.12-3_i386.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:i386. Preparing to unpack .../24-libglib2.0-0_2.58.3-2+deb10u2_i386.deb ... Unpacking libglib2.0-0:i386 (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:i386. Preparing to unpack .../25-libicu63_63.1-6_i386.deb ... Unpacking libicu63:i386 (63.1-6) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../26-libxml2_2.9.4+dfsg1-7+b3_i386.deb ... Unpacking libxml2:i386 (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:i386. Preparing to unpack .../27-libcroco3_0.6.12-3_i386.deb ... Unpacking libcroco3:i386 (0.6.12-3) ... Selecting previously unselected package libncurses6:i386. Preparing to unpack .../28-libncurses6_6.1+20181013-2+deb10u2_i386.deb ... Unpacking libncurses6:i386 (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.19.8.1-9_i386.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../33-libtest-pod-perl_1.52-1_all.deb ... Unpacking libtest-pod-perl (1.52-1) ... Setting up libpipeline1:i386 (1.5.1-2) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:i386 (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libtest-pod-perl (1.52-1) ... Setting up libmagic1:i386 (1:5.35-4+deb10u1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libicu63:i386 (63.1-6) ... Setting up autotools-dev (20180224.1) ... Setting up libncurses6:i386 (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:i386 (2.12-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:i386 (0.0.6-3) ... Setting up libbsd0:i386 (0.9.1-2) ... Setting up libelf1:i386 (0.176-1.1) ... Setting up libxml2:i386 (2.9.4+dfsg1-7+b3) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libtool (2.4.6-9) ... Setting up m4 (1.4.18-2) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libcroco3:i386 (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up gettext (0.19.8.1-9) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up po-debconf (1.0.21) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/libconfig-tiny-perl-2.23/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package libconfig-tiny-perl dpkg-buildpackage: info: source version 2.23-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_auto_configure perl -I. Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -ffile-prefix-map=/build/libconfig-tiny-perl-2.23=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=i686-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/libconfig-tiny-perl-2.23=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Config::Tiny Writing MYMETA.yml and MYMETA.json dh_auto_build make -j1 make[1]: Entering directory '/build/libconfig-tiny-perl-2.23' cp lib/Config/Tiny.pm blib/lib/Config/Tiny.pm Manifying 1 pod document make[1]: Leaving directory '/build/libconfig-tiny-perl-2.23' dh_auto_test make -j1 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libconfig-tiny-perl-2.23' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/01.compile.t ...... 1..1 ok 1 - use Config::Tiny; ok t/02.main.t ......... 1..33 ok 1 - Loaded correct version of Config::Tiny ok 2 - new() returns true ok 3 - new() returns a reference ok 4 - new() returns a hash reference ok 5 - An object of class 'Config::Tiny' isa 'Config::Tiny' ok 6 - new() returns an empty object ok 7 - read() returns true ok 8 - read() returns a reference ok 9 - read() returns a hash reference ok 10 - An object of class 'Config::Tiny' isa 'Config::Tiny' ok 11 - Config structure matches expected ok 12 - read_string() returns true ok 13 - read_string() returns expected value ok 14 - write_string() returns something ok 15 - write_string() returns the correct file contents ok 16 - write() returned true ok 17 - write() actually created a file ok 18 - read() of what we wrote returns true ok 19 - read() of what we wrote returns a reference ok 20 - read() of what we wrote returns a hash reference ok 21 - An object of class 'Config::Tiny' isa 'Config::Tiny' ok 22 - What we read matches what we wrote out ok 23 - An object of class 'Config::Tiny' isa 'Config::Tiny' ok 24 - Config::Tiny object from empty string, is empty ok 25 - An object of class 'Config::Tiny' isa 'Config::Tiny' ok 26 - First section created ok 27 - First section created properly ok 28 - Second section created ok 29 - Second section created properly ok 30 - Third section created ok 31 - Third section created properly ok 32 - write_string() returns undef on newlines ok 33 - errstr() returns expected error ok t/03.read.string.t .. 1..2 ok 1 - 'read_string() returns an object' isa 'Config::Tiny' ok 2 - Access to hashref returns correct value ok t/04.utf8.t ......... 1..7 ok 1 - Hashref after read() returns correct value ok 2 - Hashref after read() returns correct value ok 3 - Hashref after read() returns correct value ok 4 - read_string() returns true ok 5 - read_string() returns expected value ok 6 - write() followed by read() works ok 7 - write() + read() returns expected value ok t/05.zero.t ......... 1..6 ok 1 - Hashref after read() returns correct value ok 2 - read_string() returns true ok 3 - read_string() returns expected value ok 4 - write() followed by read() works ok 5 - write() + read() returns expected value ok 6 - write() + read() returns expected value ok All tests successful. Files=5, Tests=49, 0 wallclock secs ( 0.04 usr 0.00 sys + 0.28 cusr 0.02 csys = 0.34 CPU) Result: PASS make[1]: Leaving directory '/build/libconfig-tiny-perl-2.23' fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install make -j1 install DESTDIR=/build/libconfig-tiny-perl-2.23/debian/libconfig-tiny-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/libconfig-tiny-perl-2.23' Manifying 1 pod document Installing /build/libconfig-tiny-perl-2.23/debian/libconfig-tiny-perl/usr/share/perl5/Config/Tiny.pm Installing /build/libconfig-tiny-perl-2.23/debian/libconfig-tiny-perl/usr/share/man/man3/Config::Tiny.3pm make[1]: Leaving directory '/build/libconfig-tiny-perl-2.23' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libconfig-tiny-perl' in '../libconfig-tiny-perl_2.23-1_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libconfig-tiny-perl_2.23-1_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/27201 and its subdirectories I: Current time: Tue Mar 30 03:18:37 -12 2021 I: pbuilder-time-stamp: 1617117517 Wed Feb 26 08:55:39 UTC 2020 I: 1st build successful. Starting 2nd build on remote node profitbricks-build2-i386.debian.net. Wed Feb 26 08:55:39 UTC 2020 I: Preparing to do remote build '2' on profitbricks-build2-i386.debian.net. Wed Feb 26 09:00:29 UTC 2020 I: Deleting $TMPDIR on profitbricks-build2-i386.debian.net. Wed Feb 26 09:00:29 UTC 2020 I: libconfig-tiny-perl_2.23-1_i386.changes: Format: 1.8 Date: Sat, 17 Oct 2015 21:10:53 +0200 Source: libconfig-tiny-perl Binary: libconfig-tiny-perl Architecture: all Version: 2.23-1 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libconfig-tiny-perl - Read/Write .ini style files with as little code as possible Changes: libconfig-tiny-perl (2.23-1) unstable; urgency=medium . * Team upload. * Import upstream version 2.23. * Rename autopkgtest configuration file. * Add actual tests to debian/tests/pkg-perl/smoke-files. * Don't install README anymore. * Bump debhelper compatibility level to 9. Checksums-Sha1: 18f02499d699827e453a78f3a4b1b117e5b611b6 15232 libconfig-tiny-perl_2.23-1_all.deb 96adc2b3cebac6e5c16d9cfa0ed67e79141783ab 4390 libconfig-tiny-perl_2.23-1_i386.buildinfo Checksums-Sha256: 01900c532e6f3f1ac0919268850af1b8ed4e65e130b2b5cd3acaaa1459ed4839 15232 libconfig-tiny-perl_2.23-1_all.deb f9f6932fa543c34f9c6181a76ee94c0264c569be52dde6c767547e2deb31a23c 4390 libconfig-tiny-perl_2.23-1_i386.buildinfo Files: cb48c2670b1d50dde1492f1f51136020 15232 perl optional libconfig-tiny-perl_2.23-1_all.deb 183e0e128c989ddcb27753b3296f172f 4390 perl optional libconfig-tiny-perl_2.23-1_i386.buildinfo Wed Feb 26 09:00:30 UTC 2020 I: diffoscope 137 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.c1Kl074I1V/libconfig-tiny-perl_2.23-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.c1Kl074I1V/libconfig-tiny-perl_2.23-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.c1Kl074I1V/libconfig-tiny-perl_2.23-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.c1Kl074I1V/b1/libconfig-tiny-perl_2.23-1_i386.changes /srv/reproducible-results/rbuild-debian/tmp.c1Kl074I1V/b2/libconfig-tiny-perl_2.23-1_i386.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.222s) 0.222s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.017s) 0.017s 10 calls diffoscope.comparators.binary.FilesystemFile Wed Feb 26 09:00:33 UTC 2020 I: diffoscope 137 found no differences in the changes files, and a .buildinfo file also exists. Wed Feb 26 09:00:33 UTC 2020 I: libconfig-tiny-perl from buster built successfully and reproducibly on i386. Wed Feb 26 09:00:35 UTC 2020 I: Submitting .buildinfo files to external archives: Wed Feb 26 09:00:35 UTC 2020 I: Submitting 8.0K b1/libconfig-tiny-perl_2.23-1_i386.buildinfo.asc Wed Feb 26 09:00:49 UTC 2020 I: Submitting 8.0K b2/libconfig-tiny-perl_2.23-1_i386.buildinfo.asc Wed Feb 26 09:01:19 UTC 2020 E: Could not submit buildinfo from b2 to http://buildinfo.debian.net/api/submit Wed Feb 26 09:01:19 UTC 2020 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Wed Feb 26 09:01:19 UTC 2020 I: Done submitting .buildinfo files. Wed Feb 26 09:01:19 UTC 2020 I: Removing signed libconfig-tiny-perl_2.23-1_i386.buildinfo.asc files: removed './b1/libconfig-tiny-perl_2.23-1_i386.buildinfo.asc' removed './b2/libconfig-tiny-perl_2.23-1_i386.buildinfo.asc'