Fri Jul 24 05:32:56 UTC 2020 I: starting to build xinput-calibrator/buster/i386 on jenkins on '2020-07-24 05:32' Fri Jul 24 05:32:56 UTC 2020 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/i386_16/4858/console.log Fri Jul 24 05:32:56 UTC 2020 I: Downloading source for buster/xinput-calibrator=0.7.5+git20140201-1 --2020-07-24 05:32:57-- http://deb.debian.org/debian/pool/main/x/xinput-calibrator/xinput-calibrator_0.7.5+git20140201-1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2083 (2.0K) Saving to: ‘xinput-calibrator_0.7.5+git20140201-1.dsc’ 0K .. 100% 118M=0s 2020-07-24 05:32:57 (118 MB/s) - ‘xinput-calibrator_0.7.5+git20140201-1.dsc’ saved [2083/2083] Fri Jul 24 05:32:57 UTC 2020 I: xinput-calibrator_0.7.5+git20140201-1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Format: 3.0 (quilt) Source: xinput-calibrator Binary: xinput-calibrator Architecture: any Version: 0.7.5+git20140201-1 Maintainer: Andrea Colangelo Homepage: http://www.freedesktop.org/wiki/Software/xinput_calibrator/ Standards-Version: 3.9.5 Vcs-Browser: http://anonscm.debian.org/gitweb/?p=collab-maint/xinput-calibrator.git Vcs-Git: git://anonscm.debian.org/collab-maint/xinput-calibrator.git Build-Depends: debhelper (>= 9.0.0), dh-autoreconf, pkg-config, libx11-dev, libxi-dev Package-List: xinput-calibrator deb utils optional Checksums-Sha1: 936fb2adfc07b0393f01b50e608bad3e59b1ba57 46194 xinput-calibrator_0.7.5+git20140201.orig.tar.gz 4673833f369aa31870cf8d44d47a0be37f7a1bf9 9424 xinput-calibrator_0.7.5+git20140201-1.debian.tar.xz Checksums-Sha256: 91a2a481a1f9916b0963846c2f186a25e56dba9dd91506dbb3db05ef1157189b 46194 xinput-calibrator_0.7.5+git20140201.orig.tar.gz 0756f9851a8f4174eb940cf920dc2aed6ffae56242d87e6f4d840bdc349bbe31 9424 xinput-calibrator_0.7.5+git20140201-1.debian.tar.xz Files: b9b1d33b8f3667c2de095449700c49b5 46194 xinput-calibrator_0.7.5+git20140201.orig.tar.gz 5fa3007bdb3e1520185c9d49ecaeb127 9424 xinput-calibrator_0.7.5+git20140201-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAEBAgAGBQJS92l5AAoJECcT5nkIRlGvxc4P/2WZVXhS1U/Nos5Hj01q/774 PSCMHKdD/AsdJ0lAzQFF9zo12AUs1R29TCvJdcLfID7dvpOwg/WQxMntHRBivXdO qg1xusBNszkEulhaI2IHrl5/mFYjI9Sn1PnA6uRm5shkZGquPD3Ng9A5JmESIluG /RyZmaWYqzQFJcUnV8GYNrTAr/TJXdTykt0dYn1JWn7GsAnAPhQWCaCN35ZQr8mU gx/rld9YeQf24I68knhTZgX4b/Wg1AAYhCeVrnvkISu4W1yYik3Pr37X1tUFMTl/ 7NDtWALUYQw0nmMmLwcRtp8oWM2qnyoamBCj4W6j1KAyePx/3mE29KtJxdSwm6y5 /sx5bsBT+F3o5OGhtUnXYjIqCXoiJzZEKG0IQ+Cn7CHHY6QVh13UL7pI8L3R0+iR RwBPN5Os4HJPqnFCpG3GJBtebz3VnqyqfX2e0oNxlKTAyI5bG4eNEZR3DuGMsNrI seQnMlbTrW597d90cHew1eb+wy+DphCe0t9o+lHKq13fNcdzKvs1LTzlfQudiR8P cu73tng3QUfaFGIWiYE90Vxc3V/PNXk6TFVu9sb6ZdvUoOs/Hxu0nyR0xFeqo2jr FH17V8eMjF7GnAOuO/z2iirF3e+6pEDqrxvKz/pbnXeRTZ5GRJUZpBovy8aozVSV m5vlyIP2dIvNbbF4wJac =6PLg -----END PGP SIGNATURE----- Fri Jul 24 05:32:57 UTC 2020 I: Checking whether the package is not for us Fri Jul 24 05:32:57 UTC 2020 I: Starting 1st build on remote node profitbricks-build16-i386.debian.net. Fri Jul 24 05:32:57 UTC 2020 I: Preparing to do remote build '1' on profitbricks-build16-i386.debian.net. Fri Jul 24 05:33:38 UTC 2020 I: Deleting $TMPDIR on profitbricks-build16-i386.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Wed Aug 25 23:55:57 -12 2021 I: pbuilder-time-stamp: 1629978957 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/buster-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: using eatmydata during job I: Copying source file I: copying [xinput-calibrator_0.7.5+git20140201-1.dsc] I: copying [./xinput-calibrator_0.7.5+git20140201.orig.tar.gz] I: copying [./xinput-calibrator_0.7.5+git20140201-1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Sat Feb 8 23:41:45 2014 -12 gpgv: using RSA key 2713E679084651AF gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./xinput-calibrator_0.7.5+git20140201-1.dsc dpkg-source: info: extracting xinput-calibrator in xinput-calibrator-0.7.5+git20140201 dpkg-source: info: unpacking xinput-calibrator_0.7.5+git20140201.orig.tar.gz dpkg-source: info: unpacking xinput-calibrator_0.7.5+git20140201-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying typo_in_man.patch dpkg-source: info: applying typo_in_src.patch dpkg-source: info: applying do_not_install_tester.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/35625/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='i386' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=18' DISTRIBUTION='' HOME='/root' HOST_ARCH='i386' IFS=' ' INVOCATION_ID='b336393814bb46cfab8637e2d4d6d8c7' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' LD_LIBRARY_PATH='/usr/lib/libeatmydata' LD_PRELOAD='libeatmydata.so' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='35625' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.PEZvRkc9lA/pbuilderrc_LLjX --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/buster-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.PEZvRkc9lA/b1 --logfile b1/build.log xinput-calibrator_0.7.5+git20140201-1.dsc' SUDO_GID='112' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://85.184.249.68:3128' I: uname -a Linux profitbricks-build16-i386 4.19.0-9-amd64 #1 SMP Debian 4.19.118-2+deb10u1 (2020-06-07) x86_64 GNU/Linux I: ls -l /bin total 5476 -rwxr-xr-x 1 root root 1302248 Apr 17 2019 bash -rwxr-xr-x 3 root root 38280 Jul 10 2019 bunzip2 -rwxr-xr-x 3 root root 38280 Jul 10 2019 bzcat lrwxrwxrwx 1 root root 6 Jul 10 2019 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2227 Jul 10 2019 bzdiff lrwxrwxrwx 1 root root 6 Jul 10 2019 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Jun 24 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 10 2019 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3641 Jul 10 2019 bzgrep -rwxr-xr-x 3 root root 38280 Jul 10 2019 bzip2 -rwxr-xr-x 1 root root 17768 Jul 10 2019 bzip2recover lrwxrwxrwx 1 root root 6 Jul 10 2019 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 10 2019 bzmore -rwxr-xr-x 1 root root 38692 Feb 28 2019 cat -rwxr-xr-x 1 root root 75588 Feb 28 2019 chgrp -rwxr-xr-x 1 root root 63268 Feb 28 2019 chmod -rwxr-xr-x 1 root root 75588 Feb 28 2019 chown -rwxr-xr-x 1 root root 153732 Feb 28 2019 cp -rwxr-xr-x 1 root root 132820 Jan 17 2019 dash -rwxr-xr-x 1 root root 120676 Feb 28 2019 date -rwxr-xr-x 1 root root 92040 Feb 28 2019 dd -rwxr-xr-x 1 root root 100620 Feb 28 2019 df -rwxr-xr-x 1 root root 149736 Feb 28 2019 dir -rwxr-xr-x 1 root root 79412 Jan 9 2019 dmesg lrwxrwxrwx 1 root root 8 Sep 26 2018 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Sep 26 2018 domainname -> hostname -rwxr-xr-x 1 root root 34532 Feb 28 2019 echo -rwxr-xr-x 1 root root 28 Jan 7 2019 egrep -rwxr-xr-x 1 root root 34532 Feb 28 2019 false -rwxr-xr-x 1 root root 28 Jan 7 2019 fgrep -rwxr-xr-x 1 root root 67700 Jan 9 2019 findmnt -rwsr-xr-x 1 root root 30112 Apr 22 2020 fusermount -rwxr-xr-x 1 root root 206392 Jan 7 2019 grep -rwxr-xr-x 2 root root 2345 Jan 5 2019 gunzip -rwxr-xr-x 1 root root 6375 Jan 5 2019 gzexe -rwxr-xr-x 1 root root 100952 Jan 5 2019 gzip -rwxr-xr-x 1 root root 21916 Sep 26 2018 hostname -rwxr-xr-x 1 root root 79752 Feb 28 2019 ln -rwxr-xr-x 1 root root 55400 Jul 26 2018 login -rwxr-xr-x 1 root root 149736 Feb 28 2019 ls -rwxr-xr-x 1 root root 112032 Jan 9 2019 lsblk -rwxr-xr-x 1 root root 87972 Feb 28 2019 mkdir -rwxr-xr-x 1 root root 79748 Feb 28 2019 mknod -rwxr-xr-x 1 root root 46916 Feb 28 2019 mktemp -rwxr-xr-x 1 root root 42348 Jan 9 2019 more -rwsr-xr-x 1 root root 50592 Jan 9 2019 mount -rwxr-xr-x 1 root root 13724 Jan 9 2019 mountpoint -rwxr-xr-x 1 root root 157832 Feb 28 2019 mv lrwxrwxrwx 1 root root 8 Sep 26 2018 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Feb 14 2019 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 38660 Feb 28 2019 pwd lrwxrwxrwx 1 root root 4 Apr 17 2019 rbash -> bash -rwxr-xr-x 1 root root 46852 Feb 28 2019 readlink -rwxr-xr-x 1 root root 75588 Feb 28 2019 rm -rwxr-xr-x 1 root root 42756 Feb 28 2019 rmdir -rwxr-xr-x 1 root root 22276 Jan 21 2019 run-parts -rwxr-xr-x 1 root root 125036 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Aug 25 02:47 sh -> dash -rwxr-xr-x 1 root root 34532 Feb 28 2019 sleep -rwxr-xr-x 1 root root 79652 Feb 28 2019 stty -rwsr-xr-x 1 root root 71072 Jan 9 2019 su -rwxr-xr-x 1 root root 34564 Feb 28 2019 sync -rwxr-xr-x 1 root root 504024 Apr 23 2019 tar -rwxr-xr-x 1 root root 13860 Jan 21 2019 tempfile -rwxr-xr-x 1 root root 104292 Feb 28 2019 touch -rwxr-xr-x 1 root root 34532 Feb 28 2019 true -rwxr-xr-x 1 root root 17768 Apr 22 2020 ulockmgr_server -rwsr-xr-x 1 root root 30108 Jan 9 2019 umount -rwxr-xr-x 1 root root 34532 Feb 28 2019 uname -rwxr-xr-x 2 root root 2345 Jan 5 2019 uncompress -rwxr-xr-x 1 root root 149736 Feb 28 2019 vdir -rwxr-xr-x 1 root root 34208 Jan 9 2019 wdctl -rwxr-xr-x 1 root root 946 Jan 21 2019 which lrwxrwxrwx 1 root root 8 Sep 26 2018 ypdomainname -> hostname -rwxr-xr-x 1 root root 1983 Jan 5 2019 zcat -rwxr-xr-x 1 root root 1677 Jan 5 2019 zcmp -rwxr-xr-x 1 root root 5879 Jan 5 2019 zdiff -rwxr-xr-x 1 root root 29 Jan 5 2019 zegrep -rwxr-xr-x 1 root root 29 Jan 5 2019 zfgrep -rwxr-xr-x 1 root root 2080 Jan 5 2019 zforce -rwxr-xr-x 1 root root 7584 Jan 5 2019 zgrep -rwxr-xr-x 1 root root 2205 Jan 5 2019 zless -rwxr-xr-x 1 root root 1841 Jan 5 2019 zmore -rwxr-xr-x 1 root root 4552 Jan 5 2019 znew I: user script /srv/workspace/pbuilder/35625/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: i386 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper (>= 9.0.0), dh-autoreconf, pkg-config, libx11-dev, libxi-dev dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19234 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper (>= 9.0.0); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on dh-autoreconf; however: Package dh-autoreconf is not installed. pbuilder-satisfydepends-dummy depends on pkg-config; however: Package pkg-config is not installed. pbuilder-satisfydepends-dummy depends on libx11-dev; however: Package libx11-dev is not installed. pbuilder-satisfydepends-dummy depends on libxi-dev; however: Package libxi-dev is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbsd0{a} libcroco3{a} libelf1{a} libfile-stripnondeterminism-perl{a} libglib2.0-0{a} libicu63{a} libmagic-mgc{a} libmagic1{a} libncurses6{a} libpipeline1{a} libpthread-stubs0-dev{a} libsigsegv2{a} libtool{a} libuchardet0{a} libx11-6{a} libx11-data{a} libx11-dev{a} libxau-dev{a} libxau6{a} libxcb1{a} libxcb1-dev{a} libxdmcp-dev{a} libxdmcp6{a} libxext-dev{a} libxext6{a} libxfixes-dev{a} libxfixes3{a} libxi-dev{a} libxi6{a} libxml2{a} m4{a} man-db{a} pkg-config{a} po-debconf{a} sensible-utils{a} x11proto-core-dev{a} x11proto-dev{a} x11proto-fixes-dev{a} x11proto-input-dev{a} x11proto-xext-dev{a} xorg-sgml-doctools{a} xtrans-dev{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libglib2.0-data libgpm2 libltdl-dev libmail-sendmail-perl lynx shared-mime-info wget xdg-user-dirs 0 packages upgraded, 57 newly installed, 0 to remove and 0 not upgraded. Need to get 22.7 MB of archives. After unpacking 81.1 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian buster/main i386 libbsd0 i386 0.9.1-2 [104 kB] Get: 2 http://deb.debian.org/debian buster/main i386 bsdmainutils i386 11.1.2+b1 [193 kB] Get: 3 http://deb.debian.org/debian buster/main i386 libuchardet0 i386 0.0.6-3 [65.2 kB] Get: 4 http://deb.debian.org/debian buster/main i386 groff-base i386 1.22.4-3 [935 kB] Get: 5 http://deb.debian.org/debian buster/main i386 libpipeline1 i386 1.5.1-2 [33.3 kB] Get: 6 http://deb.debian.org/debian buster/main i386 man-db i386 2.8.5-2 [1284 kB] Get: 7 http://deb.debian.org/debian buster/main i386 sensible-utils all 0.0.12 [15.8 kB] Get: 8 http://deb.debian.org/debian buster/main i386 libmagic-mgc i386 1:5.35-4+deb10u1 [242 kB] Get: 9 http://deb.debian.org/debian buster/main i386 libmagic1 i386 1:5.35-4+deb10u1 [124 kB] Get: 10 http://deb.debian.org/debian buster/main i386 file i386 1:5.35-4+deb10u1 [66.3 kB] Get: 11 http://deb.debian.org/debian buster/main i386 gettext-base i386 0.19.8.1-9 [124 kB] Get: 12 http://deb.debian.org/debian buster/main i386 libsigsegv2 i386 2.12-2 [33.2 kB] Get: 13 http://deb.debian.org/debian buster/main i386 m4 i386 1.4.18-2 [205 kB] Get: 14 http://deb.debian.org/debian buster/main i386 autoconf all 2.69-11 [341 kB] Get: 15 http://deb.debian.org/debian buster/main i386 autotools-dev all 20180224.1 [77.0 kB] Get: 16 http://deb.debian.org/debian buster/main i386 automake all 1:1.16.1-4 [771 kB] Get: 17 http://deb.debian.org/debian buster/main i386 autopoint all 0.19.8.1-9 [434 kB] Get: 18 http://deb.debian.org/debian buster/main i386 libtool all 2.4.6-9 [547 kB] Get: 19 http://deb.debian.org/debian buster/main i386 dh-autoreconf all 19 [16.9 kB] Get: 20 http://deb.debian.org/debian buster/main i386 libarchive-zip-perl all 1.64-1 [96.8 kB] Get: 21 http://deb.debian.org/debian buster/main i386 libfile-stripnondeterminism-perl all 1.1.2-1 [19.8 kB] Get: 22 http://deb.debian.org/debian buster/main i386 dh-strip-nondeterminism all 1.1.2-1 [13.0 kB] Get: 23 http://deb.debian.org/debian buster/main i386 libelf1 i386 0.176-1.1 [166 kB] Get: 24 http://deb.debian.org/debian buster/main i386 dwz i386 0.12-3 [81.4 kB] Get: 25 http://deb.debian.org/debian buster/main i386 libglib2.0-0 i386 2.58.3-2+deb10u2 [1334 kB] Get: 26 http://deb.debian.org/debian buster/main i386 libicu63 i386 63.1-6+deb10u1 [8451 kB] Get: 27 http://deb.debian.org/debian buster/main i386 libxml2 i386 2.9.4+dfsg1-7+b3 [721 kB] Get: 28 http://deb.debian.org/debian buster/main i386 libcroco3 i386 0.6.12-3 [151 kB] Get: 29 http://deb.debian.org/debian buster/main i386 libncurses6 i386 6.1+20181013-2+deb10u2 [109 kB] Get: 30 http://deb.debian.org/debian buster/main i386 gettext i386 0.19.8.1-9 [1314 kB] Get: 31 http://deb.debian.org/debian buster/main i386 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 32 http://deb.debian.org/debian buster/main i386 po-debconf all 1.0.21 [248 kB] Get: 33 http://deb.debian.org/debian buster/main i386 debhelper all 12.1.1 [1016 kB] Get: 34 http://deb.debian.org/debian buster/main i386 libpthread-stubs0-dev i386 0.4-1 [5340 B] Get: 35 http://deb.debian.org/debian buster/main i386 libxau6 i386 1:1.0.8-1+b2 [20.3 kB] Get: 36 http://deb.debian.org/debian buster/main i386 libxdmcp6 i386 1:1.1.2-3 [26.7 kB] Get: 37 http://deb.debian.org/debian buster/main i386 libxcb1 i386 1.13.1-2 [141 kB] Get: 38 http://deb.debian.org/debian buster/main i386 libx11-data all 2:1.6.7-1 [298 kB] Get: 39 http://deb.debian.org/debian buster/main i386 libx11-6 i386 2:1.6.7-1 [778 kB] Get: 40 http://deb.debian.org/debian buster/main i386 xorg-sgml-doctools all 1:1.11-1 [21.9 kB] Get: 41 http://deb.debian.org/debian buster/main i386 x11proto-dev all 2018.4-4 [251 kB] Get: 42 http://deb.debian.org/debian buster/main i386 x11proto-core-dev all 2018.4-4 [3128 B] Get: 43 http://deb.debian.org/debian buster/main i386 libxau-dev i386 1:1.0.8-1+b2 [23.6 kB] Get: 44 http://deb.debian.org/debian buster/main i386 libxdmcp-dev i386 1:1.1.2-3 [42.7 kB] Get: 45 http://deb.debian.org/debian buster/main i386 x11proto-input-dev all 2018.4-4 [3132 B] Get: 46 http://deb.debian.org/debian buster/main i386 xtrans-dev all 1.3.5-1 [100 kB] Get: 47 http://deb.debian.org/debian buster/main i386 libxcb1-dev i386 1.13.1-2 [180 kB] Get: 48 http://deb.debian.org/debian buster/main i386 libx11-dev i386 2:1.6.7-1 [856 kB] Get: 49 http://deb.debian.org/debian buster/main i386 libxext6 i386 2:1.3.3-1+b2 [55.2 kB] Get: 50 http://deb.debian.org/debian buster/main i386 x11proto-xext-dev all 2018.4-4 [3128 B] Get: 51 http://deb.debian.org/debian buster/main i386 libxext-dev i386 2:1.3.3-1+b2 [110 kB] Get: 52 http://deb.debian.org/debian buster/main i386 libxfixes3 i386 1:5.0.3-1 [22.4 kB] Get: 53 http://deb.debian.org/debian buster/main i386 x11proto-fixes-dev all 1:2018.4-4 [3140 B] Get: 54 http://deb.debian.org/debian buster/main i386 libxfixes-dev i386 1:5.0.3-1 [24.3 kB] Get: 55 http://deb.debian.org/debian buster/main i386 libxi6 i386 2:1.7.9-1 [85.2 kB] Get: 56 http://deb.debian.org/debian buster/main i386 libxi-dev i386 2:1.7.9-1 [244 kB] Get: 57 http://deb.debian.org/debian buster/main i386 pkg-config i386 0.29-6 [64.7 kB] Fetched 22.7 MB in 2s (9630 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libbsd0:i386. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19234 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_i386.deb ... Unpacking libbsd0:i386 (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_i386.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:i386. Preparing to unpack .../02-libuchardet0_0.0.6-3_i386.deb ... Unpacking libuchardet0:i386 (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-3_i386.deb ... Unpacking groff-base (1.22.4-3) ... Selecting previously unselected package libpipeline1:i386. Preparing to unpack .../04-libpipeline1_1.5.1-2_i386.deb ... Unpacking libpipeline1:i386 (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_i386.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../06-sensible-utils_0.0.12_all.deb ... Unpacking sensible-utils (0.0.12) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../07-libmagic-mgc_1%3a5.35-4+deb10u1_i386.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u1) ... Selecting previously unselected package libmagic1:i386. Preparing to unpack .../08-libmagic1_1%3a5.35-4+deb10u1_i386.deb ... Unpacking libmagic1:i386 (1:5.35-4+deb10u1) ... Selecting previously unselected package file. Preparing to unpack .../09-file_1%3a5.35-4+deb10u1_i386.deb ... Unpacking file (1:5.35-4+deb10u1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../10-gettext-base_0.19.8.1-9_i386.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:i386. Preparing to unpack .../11-libsigsegv2_2.12-2_i386.deb ... Unpacking libsigsegv2:i386 (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-2_i386.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.4.6-9_all.deb ... Unpacking libtool (2.4.6-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.1.2-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.2-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.1.2-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.2-1) ... Selecting previously unselected package libelf1:i386. Preparing to unpack .../22-libelf1_0.176-1.1_i386.deb ... Unpacking libelf1:i386 (0.176-1.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.12-3_i386.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:i386. Preparing to unpack .../24-libglib2.0-0_2.58.3-2+deb10u2_i386.deb ... Unpacking libglib2.0-0:i386 (2.58.3-2+deb10u2) ... Selecting previously unselected package libicu63:i386. Preparing to unpack .../25-libicu63_63.1-6+deb10u1_i386.deb ... Unpacking libicu63:i386 (63.1-6+deb10u1) ... Selecting previously unselected package libxml2:i386. Preparing to unpack .../26-libxml2_2.9.4+dfsg1-7+b3_i386.deb ... Unpacking libxml2:i386 (2.9.4+dfsg1-7+b3) ... Selecting previously unselected package libcroco3:i386. Preparing to unpack .../27-libcroco3_0.6.12-3_i386.deb ... Unpacking libcroco3:i386 (0.6.12-3) ... Selecting previously unselected package libncurses6:i386. Preparing to unpack .../28-libncurses6_6.1+20181013-2+deb10u2_i386.deb ... Unpacking libncurses6:i386 (6.1+20181013-2+deb10u2) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.19.8.1-9_i386.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package libpthread-stubs0-dev:i386. Preparing to unpack .../33-libpthread-stubs0-dev_0.4-1_i386.deb ... Unpacking libpthread-stubs0-dev:i386 (0.4-1) ... Selecting previously unselected package libxau6:i386. Preparing to unpack .../34-libxau6_1%3a1.0.8-1+b2_i386.deb ... Unpacking libxau6:i386 (1:1.0.8-1+b2) ... Selecting previously unselected package libxdmcp6:i386. Preparing to unpack .../35-libxdmcp6_1%3a1.1.2-3_i386.deb ... Unpacking libxdmcp6:i386 (1:1.1.2-3) ... Selecting previously unselected package libxcb1:i386. Preparing to unpack .../36-libxcb1_1.13.1-2_i386.deb ... Unpacking libxcb1:i386 (1.13.1-2) ... Selecting previously unselected package libx11-data. Preparing to unpack .../37-libx11-data_2%3a1.6.7-1_all.deb ... Unpacking libx11-data (2:1.6.7-1) ... Selecting previously unselected package libx11-6:i386. Preparing to unpack .../38-libx11-6_2%3a1.6.7-1_i386.deb ... Unpacking libx11-6:i386 (2:1.6.7-1) ... Selecting previously unselected package xorg-sgml-doctools. Preparing to unpack .../39-xorg-sgml-doctools_1%3a1.11-1_all.deb ... Unpacking xorg-sgml-doctools (1:1.11-1) ... Selecting previously unselected package x11proto-dev. Preparing to unpack .../40-x11proto-dev_2018.4-4_all.deb ... Unpacking x11proto-dev (2018.4-4) ... Selecting previously unselected package x11proto-core-dev. Preparing to unpack .../41-x11proto-core-dev_2018.4-4_all.deb ... Unpacking x11proto-core-dev (2018.4-4) ... Selecting previously unselected package libxau-dev:i386. Preparing to unpack .../42-libxau-dev_1%3a1.0.8-1+b2_i386.deb ... Unpacking libxau-dev:i386 (1:1.0.8-1+b2) ... Selecting previously unselected package libxdmcp-dev:i386. Preparing to unpack .../43-libxdmcp-dev_1%3a1.1.2-3_i386.deb ... Unpacking libxdmcp-dev:i386 (1:1.1.2-3) ... Selecting previously unselected package x11proto-input-dev. Preparing to unpack .../44-x11proto-input-dev_2018.4-4_all.deb ... Unpacking x11proto-input-dev (2018.4-4) ... Selecting previously unselected package xtrans-dev. Preparing to unpack .../45-xtrans-dev_1.3.5-1_all.deb ... Unpacking xtrans-dev (1.3.5-1) ... Selecting previously unselected package libxcb1-dev:i386. Preparing to unpack .../46-libxcb1-dev_1.13.1-2_i386.deb ... Unpacking libxcb1-dev:i386 (1.13.1-2) ... Selecting previously unselected package libx11-dev:i386. Preparing to unpack .../47-libx11-dev_2%3a1.6.7-1_i386.deb ... Unpacking libx11-dev:i386 (2:1.6.7-1) ... Selecting previously unselected package libxext6:i386. Preparing to unpack .../48-libxext6_2%3a1.3.3-1+b2_i386.deb ... Unpacking libxext6:i386 (2:1.3.3-1+b2) ... Selecting previously unselected package x11proto-xext-dev. Preparing to unpack .../49-x11proto-xext-dev_2018.4-4_all.deb ... Unpacking x11proto-xext-dev (2018.4-4) ... Selecting previously unselected package libxext-dev:i386. Preparing to unpack .../50-libxext-dev_2%3a1.3.3-1+b2_i386.deb ... Unpacking libxext-dev:i386 (2:1.3.3-1+b2) ... Selecting previously unselected package libxfixes3:i386. Preparing to unpack .../51-libxfixes3_1%3a5.0.3-1_i386.deb ... Unpacking libxfixes3:i386 (1:5.0.3-1) ... Selecting previously unselected package x11proto-fixes-dev. Preparing to unpack .../52-x11proto-fixes-dev_1%3a2018.4-4_all.deb ... Unpacking x11proto-fixes-dev (1:2018.4-4) ... Selecting previously unselected package libxfixes-dev:i386. Preparing to unpack .../53-libxfixes-dev_1%3a5.0.3-1_i386.deb ... Unpacking libxfixes-dev:i386 (1:5.0.3-1) ... Selecting previously unselected package libxi6:i386. Preparing to unpack .../54-libxi6_2%3a1.7.9-1_i386.deb ... Unpacking libxi6:i386 (2:1.7.9-1) ... Selecting previously unselected package libxi-dev:i386. Preparing to unpack .../55-libxi-dev_2%3a1.7.9-1_i386.deb ... Unpacking libxi-dev:i386 (2:1.7.9-1) ... Selecting previously unselected package pkg-config. Preparing to unpack .../56-pkg-config_0.29-6_i386.deb ... Unpacking pkg-config (0.29-6) ... Setting up libpipeline1:i386 (1.5.1-2) ... Setting up libxau6:i386 (1:1.0.8-1+b2) ... Setting up libmagic-mgc (1:5.35-4+deb10u1) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:i386 (2.58.3-2+deb10u2) ... No schema files found: doing nothing. Setting up libmagic1:i386 (1:5.35-4+deb10u1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up file (1:5.35-4+deb10u1) ... Setting up libpthread-stubs0-dev:i386 (0.4-1) ... Setting up libicu63:i386 (63.1-6+deb10u1) ... Setting up xtrans-dev (1.3.5-1) ... Setting up autotools-dev (20180224.1) ... Setting up libx11-data (2:1.6.7-1) ... Setting up libncurses6:i386 (6.1+20181013-2+deb10u2) ... Setting up libsigsegv2:i386 (2.12-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up pkg-config (0.29-6) ... Setting up sensible-utils (0.0.12) ... Setting up libuchardet0:i386 (0.0.6-3) ... Setting up xorg-sgml-doctools (1:1.11-1) ... Setting up libbsd0:i386 (0.9.1-2) ... Setting up libelf1:i386 (0.176-1.1) ... Setting up libxml2:i386 (2.9.4+dfsg1-7+b3) ... Setting up x11proto-dev (2018.4-4) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libxdmcp6:i386 (1:1.1.2-3) ... Setting up libxcb1:i386 (1.13.1-2) ... Setting up libxau-dev:i386 (1:1.0.8-1+b2) ... Setting up libtool (2.4.6-9) ... Setting up m4 (1.4.18-2) ... Setting up libxdmcp-dev:i386 (1:1.1.2-3) ... Setting up x11proto-core-dev (2018.4-4) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up x11proto-input-dev (2018.4-4) ... Setting up libcroco3:i386 (0.6.12-3) ... Setting up autoconf (2.69-11) ... Setting up x11proto-xext-dev (2018.4-4) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-3) ... Setting up libx11-6:i386 (2:1.6.7-1) ... Setting up x11proto-fixes-dev (1:2018.4-4) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up gettext (0.19.8.1-9) ... Setting up libxcb1-dev:i386 (1.13.1-2) ... Setting up libx11-dev:i386 (2:1.6.7-1) ... Setting up libxext6:i386 (2:1.3.3-1+b2) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up intltool-debian (0.35.0+20060710.5) ... Setting up libxfixes3:i386 (1:5.0.3-1) ... Setting up libxext-dev:i386 (2:1.3.3-1+b2) ... Setting up libxi6:i386 (2:1.7.9-1) ... Setting up po-debconf (1.0.21) ... Setting up libxfixes-dev:i386 (1:5.0.3-1) ... Setting up libxi-dev:i386 (2:1.7.9-1) ... Setting up debhelper (12.1.1) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.23-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/xinput-calibrator-0.7.5+git20140201/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b dpkg-buildpackage: info: source package xinput-calibrator dpkg-buildpackage: info: source version 0.7.5+git20140201-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Andrea Colangelo dpkg-source --before-build . dpkg-buildpackage: info: host architecture i386 fakeroot debian/rules clean dh clean --with autoreconf dh_clean debian/rules build dh build --with autoreconf dh_update_autotools_config dh_autoreconf libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, libtoolize: and rerunning libtoolize and aclocal. libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am. configure.ac:32: installing './compile' configure.ac:34: installing './config.guess' configure.ac:34: installing './config.sub' configure.ac:29: installing './install-sh' configure.ac:29: installing './missing' src/Makefile.am:39: warning: source file 'gui/gtkmm.cpp' is in a subdirectory, src/Makefile.am:39: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. src/Makefile.am:35: warning: source file 'calibrator/XorgPrint.cpp' is in a subdirectory, src/Makefile.am:35: but option 'subdir-objects' is disabled src/Makefile.am:35: warning: source file 'calibrator/Evdev.cpp' is in a subdirectory, src/Makefile.am:35: but option 'subdir-objects' is disabled src/Makefile.am:35: warning: source file 'calibrator/Usbtouchscreen.cpp' is in a subdirectory, src/Makefile.am:35: but option 'subdir-objects' is disabled src/Makefile.am:35: warning: source file 'gui/gui_common.cpp' is in a subdirectory, src/Makefile.am:35: but option 'subdir-objects' is disabled src/Makefile.am:39: warning: source file 'gui/x11.cpp' is in a subdirectory, src/Makefile.am:39: but option 'subdir-objects' is disabled src/Makefile.am: installing './depcomp' src/Makefile.am:54: warning: variable 'tester_SOURCES' is defined but no program or src/Makefile.am:54: library has 'tester' as canonical name (possible typo) src/Makefile.am:55: warning: variable 'tester_LDADD' is defined but no program or src/Makefile.am:55: library has 'tester' as canonical name (possible typo) debian/rules override_dh_auto_configure make[1]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201' ./autogen.sh autoreconf: Entering directory `.' autoreconf: configure.ac: not using Gettext autoreconf: running: aclocal autoreconf: configure.ac: tracing autoreconf: running: libtoolize --copy libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, libtoolize: and rerunning libtoolize and aclocal. libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am. autoreconf: running: /usr/bin/autoconf autoreconf: configure.ac: not using Autoheader autoreconf: running: automake --add-missing --copy --no-force src/Makefile.am:39: warning: source file 'gui/gtkmm.cpp' is in a subdirectory, src/Makefile.am:39: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. src/Makefile.am:35: warning: source file 'calibrator/XorgPrint.cpp' is in a subdirectory, src/Makefile.am:35: but option 'subdir-objects' is disabled src/Makefile.am:35: warning: source file 'calibrator/Evdev.cpp' is in a subdirectory, src/Makefile.am:35: but option 'subdir-objects' is disabled src/Makefile.am:35: warning: source file 'calibrator/Usbtouchscreen.cpp' is in a subdirectory, src/Makefile.am:35: but option 'subdir-objects' is disabled src/Makefile.am:35: warning: source file 'gui/gui_common.cpp' is in a subdirectory, src/Makefile.am:35: but option 'subdir-objects' is disabled src/Makefile.am:39: warning: source file 'gui/x11.cpp' is in a subdirectory, src/Makefile.am:39: but option 'subdir-objects' is disabled src/Makefile.am:54: warning: variable 'tester_SOURCES' is defined but no program or src/Makefile.am:54: library has 'tester' as canonical name (possible typo) src/Makefile.am:55: warning: variable 'tester_LDADD' is defined but no program or src/Makefile.am:55: library has 'tester' as canonical name (possible typo) autoreconf: Leaving directory `.' checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether to enable maintainer-specific portions of Makefiles... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_i386) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld -m elf_i386 checking if the linker (/usr/bin/ld -m elf_i386) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld -m elf_i386) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld -m elf_i386) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for X... libraries , headers checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking string usability... no checking string presence... no checking for string... no checking list usability... no checking list presence... no checking for list... no checking for stdbool.h that conforms to C99... yes checking for _Bool... yes checking for working strtod... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for XINPUT... yes checking for XI_PROP... yes checking gui... default checking for GTKMM... no checking for X11... yes checking for XRANDR... no checking for timerfd_create(2) system call... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating scripts/Makefile config.status: creating src/Makefile config.status: creating src/calibrator/Makefile config.status: creating src/gui/Makefile config.status: creating man/Makefile config.status: executing depfiles commands config.status: executing libtool commands dh_auto_configure ./configure --build=i686-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-silent-rules --libdir=\${prefix}/lib/i386-linux-gnu --libexecdir=\${prefix}/lib/i386-linux-gnu --disable-maintainer-mode --disable-dependency-tracking checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... none checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... none checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert i686-pc-linux-gnu file names to i686-pc-linux-gnu format... func_convert_file_noop checking how to convert i686-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for X... libraries , headers checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking string usability... no checking string presence... no checking for string... no checking list usability... no checking list presence... no checking for list... no checking for stdbool.h that conforms to C99... yes checking for _Bool... yes checking for working strtod... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for XINPUT... yes checking for XI_PROP... yes checking gui... default checking for GTKMM... no checking for X11... yes checking for XRANDR... no checking for timerfd_create(2) system call... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating scripts/Makefile config.status: creating src/Makefile config.status: creating src/calibrator/Makefile config.status: creating src/gui/Makefile config.status: creating man/Makefile config.status: executing depfiles commands config.status: executing libtool commands make[1]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201' dh_auto_build make -j1 make[1]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201' Making all in src make[2]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201/src' Making all in calibrator make[3]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201/src/calibrator' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201/src/calibrator' Making all in gui make[3]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201/src/gui' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201/src/gui' make[3]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201/src' g++ -DPACKAGE_NAME=\"xinput_calibrator\" -DPACKAGE_TARNAME=\"xinput_calibrator\" -DPACKAGE_VERSION=\"0.7.5\" -DPACKAGE_STRING=\"xinput_calibrator\ 0.7.5\" -DPACKAGE_BUGREPORT=\"http://github.com/tias/xinput_calibrator/issues\" -DPACKAGE_URL=\"http://www.freedesktop.org/wiki/Software/xinput_calibrator\" -DPACKAGE=\"xinput_calibrator\" -DVERSION=\"0.7.5\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE__BOOL=1 -DHAVE_STDBOOL_H=1 -DHAVE_XI_PROP=1 -DHAVE_TIMERFD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -ansi -pedantic -g -O2 -ffile-prefix-map=/build/xinput-calibrator-0.7.5+git20140201=. -fstack-protector-strong -Wformat -Werror=format-security -c -o xinput_calibrator-x11.o `test -f 'gui/x11.cpp' || echo './'`gui/x11.cpp g++ -DPACKAGE_NAME=\"xinput_calibrator\" -DPACKAGE_TARNAME=\"xinput_calibrator\" -DPACKAGE_VERSION=\"0.7.5\" -DPACKAGE_STRING=\"xinput_calibrator\ 0.7.5\" -DPACKAGE_BUGREPORT=\"http://github.com/tias/xinput_calibrator/issues\" -DPACKAGE_URL=\"http://www.freedesktop.org/wiki/Software/xinput_calibrator\" -DPACKAGE=\"xinput_calibrator\" -DVERSION=\"0.7.5\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE__BOOL=1 -DHAVE_STDBOOL_H=1 -DHAVE_XI_PROP=1 -DHAVE_TIMERFD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -ansi -pedantic -g -O2 -ffile-prefix-map=/build/xinput-calibrator-0.7.5+git20140201=. -fstack-protector-strong -Wformat -Werror=format-security -c -o xinput_calibrator-main_x11.o `test -f 'main_x11.cpp' || echo './'`main_x11.cpp g++ -DPACKAGE_NAME=\"xinput_calibrator\" -DPACKAGE_TARNAME=\"xinput_calibrator\" -DPACKAGE_VERSION=\"0.7.5\" -DPACKAGE_STRING=\"xinput_calibrator\ 0.7.5\" -DPACKAGE_BUGREPORT=\"http://github.com/tias/xinput_calibrator/issues\" -DPACKAGE_URL=\"http://www.freedesktop.org/wiki/Software/xinput_calibrator\" -DPACKAGE=\"xinput_calibrator\" -DVERSION=\"0.7.5\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE__BOOL=1 -DHAVE_STDBOOL_H=1 -DHAVE_XI_PROP=1 -DHAVE_TIMERFD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -ansi -pedantic -g -O2 -ffile-prefix-map=/build/xinput-calibrator-0.7.5+git20140201=. -fstack-protector-strong -Wformat -Werror=format-security -c -o xinput_calibrator-calibrator.o `test -f 'calibrator.cpp' || echo './'`calibrator.cpp calibrator.cpp: In member function 'bool Calibrator::is_sysfs_name(const char*)': calibrator.cpp:216:38: warning: '%s' directive writing up to 255 bytes into a region of size 39 [-Wformat-overflow=] (void) sprintf(filename, "%s/%s/%s", SYSFS_INPUT, ep->d_name, SYSFS_DEVNAME); ^~~~~~~~~~ In file included from /usr/include/stdio.h:873, from /usr/include/c++/8/cstdio:42, from /usr/include/c++/8/fstream:41, from calibrator.cpp:28: /usr/include/i386-linux-gnu/bits/stdio2.h:36:34: note: '__builtin___sprintf_chk' output 3 or more bytes (assuming 258) into a destination of size 40 return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ g++ -DPACKAGE_NAME=\"xinput_calibrator\" -DPACKAGE_TARNAME=\"xinput_calibrator\" -DPACKAGE_VERSION=\"0.7.5\" -DPACKAGE_STRING=\"xinput_calibrator\ 0.7.5\" -DPACKAGE_BUGREPORT=\"http://github.com/tias/xinput_calibrator/issues\" -DPACKAGE_URL=\"http://www.freedesktop.org/wiki/Software/xinput_calibrator\" -DPACKAGE=\"xinput_calibrator\" -DVERSION=\"0.7.5\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE__BOOL=1 -DHAVE_STDBOOL_H=1 -DHAVE_XI_PROP=1 -DHAVE_TIMERFD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -ansi -pedantic -g -O2 -ffile-prefix-map=/build/xinput-calibrator-0.7.5+git20140201=. -fstack-protector-strong -Wformat -Werror=format-security -c -o xinput_calibrator-XorgPrint.o `test -f 'calibrator/XorgPrint.cpp' || echo './'`calibrator/XorgPrint.cpp g++ -DPACKAGE_NAME=\"xinput_calibrator\" -DPACKAGE_TARNAME=\"xinput_calibrator\" -DPACKAGE_VERSION=\"0.7.5\" -DPACKAGE_STRING=\"xinput_calibrator\ 0.7.5\" -DPACKAGE_BUGREPORT=\"http://github.com/tias/xinput_calibrator/issues\" -DPACKAGE_URL=\"http://www.freedesktop.org/wiki/Software/xinput_calibrator\" -DPACKAGE=\"xinput_calibrator\" -DVERSION=\"0.7.5\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE__BOOL=1 -DHAVE_STDBOOL_H=1 -DHAVE_XI_PROP=1 -DHAVE_TIMERFD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -ansi -pedantic -g -O2 -ffile-prefix-map=/build/xinput-calibrator-0.7.5+git20140201=. -fstack-protector-strong -Wformat -Werror=format-security -c -o xinput_calibrator-Evdev.o `test -f 'calibrator/Evdev.cpp' || echo './'`calibrator/Evdev.cpp g++ -DPACKAGE_NAME=\"xinput_calibrator\" -DPACKAGE_TARNAME=\"xinput_calibrator\" -DPACKAGE_VERSION=\"0.7.5\" -DPACKAGE_STRING=\"xinput_calibrator\ 0.7.5\" -DPACKAGE_BUGREPORT=\"http://github.com/tias/xinput_calibrator/issues\" -DPACKAGE_URL=\"http://www.freedesktop.org/wiki/Software/xinput_calibrator\" -DPACKAGE=\"xinput_calibrator\" -DVERSION=\"0.7.5\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE__BOOL=1 -DHAVE_STDBOOL_H=1 -DHAVE_XI_PROP=1 -DHAVE_TIMERFD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -ansi -pedantic -g -O2 -ffile-prefix-map=/build/xinput-calibrator-0.7.5+git20140201=. -fstack-protector-strong -Wformat -Werror=format-security -c -o xinput_calibrator-Usbtouchscreen.o `test -f 'calibrator/Usbtouchscreen.cpp' || echo './'`calibrator/Usbtouchscreen.cpp calibrator/Usbtouchscreen.cpp: In member function 'void CalibratorUsbtouchscreen::read_int_parameter(const char*, int&)': calibrator/Usbtouchscreen.cpp:153:9: warning: variable 'dummy' set but not used [-Wunused-but-set-variable] int dummy; ^~~~~ calibrator/Usbtouchscreen.cpp: In member function 'void CalibratorUsbtouchscreen::read_bool_parameter(const char*, bool&)': calibrator/Usbtouchscreen.cpp:168:11: warning: variable 'dummy' set but not used [-Wunused-but-set-variable] char *dummy; ^~~~~ calibrator/Usbtouchscreen.cpp: In member function 'virtual bool CalibratorUsbtouchscreen::finish_data(XYinfo)': calibrator/Usbtouchscreen.cpp:131:22: warning: ' ' directive writing 1 byte into a region of size 0 [-Wformat-overflow=] sprintf(new_opt, "%s %s=%d %s=%d %s=%d %s=%d %s=%d %s=%d %s=%c %s=%c %s=%c %s=%c\n", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/stdio.h:873, from ./calibrator.hh:30, from ./calibrator/Usbtouchscreen.hpp:26, from calibrator/Usbtouchscreen.cpp:23: /usr/include/i386-linux-gnu/bits/stdio2.h:36:34: note: '__builtin___sprintf_chk' output between 119 and 179 bytes into a destination of size 22 return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ g++ -DPACKAGE_NAME=\"xinput_calibrator\" -DPACKAGE_TARNAME=\"xinput_calibrator\" -DPACKAGE_VERSION=\"0.7.5\" -DPACKAGE_STRING=\"xinput_calibrator\ 0.7.5\" -DPACKAGE_BUGREPORT=\"http://github.com/tias/xinput_calibrator/issues\" -DPACKAGE_URL=\"http://www.freedesktop.org/wiki/Software/xinput_calibrator\" -DPACKAGE=\"xinput_calibrator\" -DVERSION=\"0.7.5\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE__BOOL=1 -DHAVE_STDBOOL_H=1 -DHAVE_XI_PROP=1 -DHAVE_TIMERFD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -ansi -pedantic -g -O2 -ffile-prefix-map=/build/xinput-calibrator-0.7.5+git20140201=. -fstack-protector-strong -Wformat -Werror=format-security -c -o xinput_calibrator-main_common.o `test -f 'main_common.cpp' || echo './'`main_common.cpp g++ -DPACKAGE_NAME=\"xinput_calibrator\" -DPACKAGE_TARNAME=\"xinput_calibrator\" -DPACKAGE_VERSION=\"0.7.5\" -DPACKAGE_STRING=\"xinput_calibrator\ 0.7.5\" -DPACKAGE_BUGREPORT=\"http://github.com/tias/xinput_calibrator/issues\" -DPACKAGE_URL=\"http://www.freedesktop.org/wiki/Software/xinput_calibrator\" -DPACKAGE=\"xinput_calibrator\" -DVERSION=\"0.7.5\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE__BOOL=1 -DHAVE_STDBOOL_H=1 -DHAVE_XI_PROP=1 -DHAVE_TIMERFD=1 -I. -Wdate-time -D_FORTIFY_SOURCE=2 -Wall -ansi -pedantic -g -O2 -ffile-prefix-map=/build/xinput-calibrator-0.7.5+git20140201=. -fstack-protector-strong -Wformat -Werror=format-security -c -o xinput_calibrator-gui_common.o `test -f 'gui/gui_common.cpp' || echo './'`gui/gui_common.cpp gui/gui_common.cpp: In function 'void get_display_texts(std::__cxx11::list >*, Calibrator*)': gui/gui_common.cpp:48:5: warning: this 'else' clause does not guard... [-Wmisleading-indentation] else ^~~~ gui/gui_common.cpp:50:2: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'else' texts->push_back(str); ^~~~~ /bin/bash ../libtool --tag=CXX --mode=link g++ -Wall -ansi -pedantic -g -O2 -ffile-prefix-map=/build/xinput-calibrator-0.7.5+git20140201=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -o xinput_calibrator xinput_calibrator-x11.o xinput_calibrator-main_x11.o xinput_calibrator-calibrator.o xinput_calibrator-XorgPrint.o xinput_calibrator-Evdev.o xinput_calibrator-Usbtouchscreen.o xinput_calibrator-main_common.o xinput_calibrator-gui_common.o -lX11 -lXext -lXi -lX11 libtool: link: g++ -Wall -ansi -pedantic -g -O2 -ffile-prefix-map=/build/xinput-calibrator-0.7.5+git20140201=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z -Wl,relro -o xinput_calibrator xinput_calibrator-x11.o xinput_calibrator-main_x11.o xinput_calibrator-calibrator.o xinput_calibrator-XorgPrint.o xinput_calibrator-Evdev.o xinput_calibrator-Usbtouchscreen.o xinput_calibrator-main_common.o xinput_calibrator-gui_common.o -lXext -lXi -lX11 make[3]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201/src' make[2]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201/src' Making all in man make[2]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201/man' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201/man' Making all in scripts make[2]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201/scripts' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201/scripts' make[2]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201' make[2]: Nothing to be done for 'all-am'. make[2]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201' make[1]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201' dh_auto_test make -j1 check VERBOSE=1 make[1]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201' Making check in src make[2]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201/src' Making check in calibrator make[3]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201/src/calibrator' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201/src/calibrator' Making check in gui make[3]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201/src/gui' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201/src/gui' make[3]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201/src' make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201/src' make[2]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201/src' Making check in man make[2]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201/man' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201/man' Making check in scripts make[2]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201/scripts' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201/scripts' make[2]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201' make[2]: Nothing to be done for 'check-am'. make[2]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201' make[1]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201' fakeroot debian/rules binary dh binary --with autoreconf dh_testroot dh_prep dh_auto_install make -j1 install DESTDIR=/build/xinput-calibrator-0.7.5\+git20140201/debian/xinput-calibrator AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201' Making install in src make[2]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201/src' Making install in calibrator make[3]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201/src/calibrator' make[4]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201/src/calibrator' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201/src/calibrator' make[3]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201/src/calibrator' Making install in gui make[3]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201/src/gui' make[4]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201/src/gui' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201/src/gui' make[3]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201/src/gui' make[3]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201/src' make[4]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201/src' /bin/mkdir -p '/build/xinput-calibrator-0.7.5+git20140201/debian/xinput-calibrator/usr/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c xinput_calibrator '/build/xinput-calibrator-0.7.5+git20140201/debian/xinput-calibrator/usr/bin' libtool: install: /usr/bin/install -c xinput_calibrator /build/xinput-calibrator-0.7.5+git20140201/debian/xinput-calibrator/usr/bin/xinput_calibrator make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201/src' make[3]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201/src' make[2]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201/src' Making install in man make[2]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201/man' make[3]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201/man' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/xinput-calibrator-0.7.5+git20140201/debian/xinput-calibrator/usr/share/man/man1' /usr/bin/install -c -m 644 xinput_calibrator.1 '/build/xinput-calibrator-0.7.5+git20140201/debian/xinput-calibrator/usr/share/man/man1' make[3]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201/man' make[2]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201/man' Making install in scripts make[2]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201/scripts' make[3]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201/scripts' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/xinput-calibrator-0.7.5+git20140201/debian/xinput-calibrator/usr/share/pixmaps' /usr/bin/install -c -m 644 xinput_calibrator.svg xinput_calibrator.xpm '/build/xinput-calibrator-0.7.5+git20140201/debian/xinput-calibrator/usr/share/pixmaps' /bin/mkdir -p '/build/xinput-calibrator-0.7.5+git20140201/debian/xinput-calibrator/usr/share/applications' /usr/bin/install -c -m 644 xinput_calibrator.desktop '/build/xinput-calibrator-0.7.5+git20140201/debian/xinput-calibrator/usr/share/applications' make[3]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201/scripts' make[2]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201/scripts' make[2]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201' make[3]: Entering directory '/build/xinput-calibrator-0.7.5+git20140201' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201' make[2]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201' make[1]: Leaving directory '/build/xinput-calibrator-0.7.5+git20140201' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_strip dh_makeshlibs dh_shlibdeps dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/xinput-calibrator/usr/bin/xinput_calibrator was not linked against libXext.so.6 (it uses none of the library's symbols) dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'xinput-calibrator' in '../xinput-calibrator_0.7.5+git20140201-1_i386.deb'. dpkg-deb: building package 'xinput-calibrator-dbgsym' in '../xinput-calibrator-dbgsym_0.7.5+git20140201-1_i386.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../xinput-calibrator_0.7.5+git20140201-1_i386.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/35625 and its subdirectories I: Current time: Wed Aug 25 23:56:37 -12 2021 I: pbuilder-time-stamp: 1629978997 Fri Jul 24 05:33:38 UTC 2020 I: 1st build successful. Starting 2nd build on remote node profitbricks-build12-i386.debian.net. Fri Jul 24 05:33:38 UTC 2020 I: Preparing to do remote build '2' on profitbricks-build12-i386.debian.net. Fri Jul 24 05:38:56 UTC 2020 I: Deleting $TMPDIR on profitbricks-build12-i386.debian.net. Fri Jul 24 05:38:56 UTC 2020 I: xinput-calibrator_0.7.5+git20140201-1_i386.changes: Format: 1.8 Date: Sat, 01 Feb 2014 11:35:43 +0100 Source: xinput-calibrator Binary: xinput-calibrator xinput-calibrator-dbgsym Architecture: i386 Version: 0.7.5+git20140201-1 Distribution: unstable Urgency: low Maintainer: Andrea Colangelo Changed-By: Andrea Colangelo Description: xinput-calibrator - Generic touchscreen calibration program for X.Org Closes: 592073 Changes: xinput-calibrator (0.7.5+git20140201-1) unstable; urgency=low . * Initial release. (Closes: #592073) Checksums-Sha1: 9fcf3ad8678831d9a2c1a0b24aee2fb23bbbf7a1 221352 xinput-calibrator-dbgsym_0.7.5+git20140201-1_i386.deb 722f346ef92d264bedfd4b126095da3a551ae38a 5448 xinput-calibrator_0.7.5+git20140201-1_i386.buildinfo 865ed23b953d699fca2455891b535abd08770a8c 46940 xinput-calibrator_0.7.5+git20140201-1_i386.deb Checksums-Sha256: 7f38498de9818300fc7e50e49770ba1caff8bc8c22c0e4893d19ffac611e3798 221352 xinput-calibrator-dbgsym_0.7.5+git20140201-1_i386.deb 964590382a2c44a2a3790757d6aa399363162d7f856fb7aadf18ea3495163bf9 5448 xinput-calibrator_0.7.5+git20140201-1_i386.buildinfo 748427c1895529956af8866cac91fb68d640d96fdd650e534d1de34c181c5774 46940 xinput-calibrator_0.7.5+git20140201-1_i386.deb Files: a9e219cd2ce303e0520ea9329c93d304 221352 debug optional xinput-calibrator-dbgsym_0.7.5+git20140201-1_i386.deb 5b69b7dd196b5995f3819a9c6e425586 5448 utils optional xinput-calibrator_0.7.5+git20140201-1_i386.buildinfo ebc5865517ab48ec5c7e77ec8d3dae02 46940 utils optional xinput-calibrator_0.7.5+git20140201-1_i386.deb Fri Jul 24 05:38:58 UTC 2020 I: diffoscope 152 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.PEZvRkc9lA/xinput-calibrator_0.7.5+git20140201-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.PEZvRkc9lA/xinput-calibrator_0.7.5+git20140201-1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.PEZvRkc9lA/xinput-calibrator_0.7.5+git20140201-1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.PEZvRkc9lA/b1/xinput-calibrator_0.7.5+git20140201-1_i386.changes /srv/reproducible-results/rbuild-debian/tmp.PEZvRkc9lA/b2/xinput-calibrator_0.7.5+git20140201-1_i386.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.227s) 0.227s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.028s) 0.028s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Fri Jul 24 05:39:00 UTC 2020 I: diffoscope 152 found no differences in the changes files, and a .buildinfo file also exists. Fri Jul 24 05:39:00 UTC 2020 I: xinput-calibrator from buster built successfully and reproducibly on i386. Fri Jul 24 05:39:01 UTC 2020 I: Submitting .buildinfo files to external archives: Fri Jul 24 05:39:01 UTC 2020 I: Submitting 8.0K b1/xinput-calibrator_0.7.5+git20140201-1_i386.buildinfo.asc Fri Jul 24 05:39:03 UTC 2020 I: Submitting 8.0K b2/xinput-calibrator_0.7.5+git20140201-1_i386.buildinfo.asc Fri Jul 24 05:39:04 UTC 2020 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri Jul 24 05:39:04 UTC 2020 I: Done submitting .buildinfo files. Fri Jul 24 05:39:04 UTC 2020 I: Removing signed xinput-calibrator_0.7.5+git20140201-1_i386.buildinfo.asc files: removed './b1/xinput-calibrator_0.7.5+git20140201-1_i386.buildinfo.asc' removed './b2/xinput-calibrator_0.7.5+git20140201-1_i386.buildinfo.asc'