Wed Mar 19 14:03:06 UTC 2025 I: starting to build libcoro-perl/trixie/amd64 on jenkins on '2025-03-19 14:02' Wed Mar 19 14:03:06 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/amd64_37/54529/console.log Wed Mar 19 14:03:06 UTC 2025 I: Downloading source for trixie/libcoro-perl=6.570-3 --2025-03-19 14:03:07-- http://deb.debian.org/debian/pool/main/libc/libcoro-perl/libcoro-perl_6.570-3.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2237 (2.2K) [text/prs.lines.tag] Saving to: ‘libcoro-perl_6.570-3.dsc’ 0K .. 100% 337M=0s 2025-03-19 14:03:07 (337 MB/s) - ‘libcoro-perl_6.570-3.dsc’ saved [2237/2237] Wed Mar 19 14:03:07 UTC 2025 I: libcoro-perl_6.570-3.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libcoro-perl Binary: libcoro-perl Architecture: any Version: 6.570-3 Maintainer: Debian Perl Group Uploaders: gregor herrmann , Xavier Guimard Homepage: https://metacpan.org/release/Coro Standards-Version: 4.6.0 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libcoro-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libcoro-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), libanyevent-perl , libcanary-stability-perl, libcommon-sense-perl , libev-perl , libevent-perl , libguard-perl , perl-xs-dev, perl:native Package-List: libcoro-perl deb perl optional arch=any Checksums-Sha1: 1ff1c7aee5cd1c31fbc50c38ab86d0ab0930417d 198128 libcoro-perl_6.570.orig.tar.gz 8eadb79d486e5f0fb1f0f431ef05828b443caa07 8040 libcoro-perl_6.570-3.debian.tar.xz Checksums-Sha256: 1928e48033540e11ebf5506986dd101af78d2421d210f96599223b15d51714c6 198128 libcoro-perl_6.570.orig.tar.gz 8d551de32102795bf390787a89772615483d74ddc535d27a02ad02835110475c 8040 libcoro-perl_6.570-3.debian.tar.xz Files: fa5970a2a2f3df9d68d4369c7dde1a55 198128 libcoro-perl_6.570.orig.tar.gz b0bb002ce51d19104909a02f6c0869bc 8040 libcoro-perl_6.570-3.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmNILwQACgkQV5wWDUye I+hLbRAApBOXVGzXguBNK9MFoOn4keInrXFxaRWKs2BFQop/9otmx0KDVCQ0SVpq FPWClvUnb5GHtuf4GIF7eC2+oOZ0JNw0qTgiTG7OyGHTeZgrWYI8TwVJykDp0j+M h7YU2vPXml45Tl3AsBUNNVfRq9XrFMYfNTdeHhqfSjBNay3cWUoqaDVW3lxk1c7W Pa6ScOeHdLErodURmBALyW+Jw9AqDDgLHsGaJEngmjN9E7XTtV/UQ1iFiMobSYi8 n/jIOxYLQNZsI7RuQefZb9rnQ2HupLECcwZv5zv709LCw3LhtrHYpnBcN4bPDv2B Tv4Ga/yuoGr/maAzf2ItIl8zQaT8oBCFr95xc4HvWhqkviV9qZpazem+6OfYSy7t O5+5dr+VgmU6FoEnd0YGU5FnJL48t0IIZp//dMpXth5vrcbZtwt/+Yx94u0YgS32 dC5+1qGBPrEzMUqKZxnAg1jwAvOxCSD5qqcX8JHbxNe4iPTm64jkAnfjU9d6tJxl v71abriNuhy30RNBg/LY4/zmdxL+hEvAkfDCglxuyOv5C8d0h2E2kT8Jww8d+vD/ I6Se83Jjyu9FPRVd+e+aRRTSLNQN6GLpTKi5QUJYnNaGUv7//jJN1b0g6V9gsaeZ et1NREutX3m+Ts4OzgCuQPXX3G1it40HAnQXwKneqkEh0SV/Et0= =SebT -----END PGP SIGNATURE----- Wed Mar 19 14:03:07 UTC 2025 I: Checking whether the package is not for us Wed Mar 19 14:03:07 UTC 2025 I: Starting 1st build on remote node infom01-amd64.debian.net. Wed Mar 19 14:03:07 UTC 2025 I: Preparing to do remote build '1' on infom01-amd64.debian.net. Wed Mar 19 14:03:42 UTC 2025 I: Deleting $TMPDIR on infom01-amd64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Wed Mar 19 02:03:08 -12 2025 I: pbuilder-time-stamp: 1742392988 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libcoro-perl_6.570-3.dsc] I: copying [./libcoro-perl_6.570.orig.tar.gz] I: copying [./libcoro-perl_6.570-3.debian.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./libcoro-perl_6.570-3.dsc: unsupported subcommand dpkg-source: info: extracting libcoro-perl in libcoro-perl-6.570 dpkg-source: info: unpacking libcoro-perl_6.570.orig.tar.gz dpkg-source: info: unpacking libcoro-perl_6.570-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying whatis.patch dpkg-source: info: applying spelling.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/400044/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='15f3e161f6424859801ef8d99a1a16af' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='400044' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.TExDDuIr/pbuilderrc_KrbT --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.TExDDuIr/b1 --logfile b1/build.log libcoro-perl_6.570-3.dsc' SUDO_GID='109' SUDO_UID='104' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' I: uname -a Linux infom01-amd64 6.1.0-32-cloud-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.129-1 (2025-03-06) x86_64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Mar 4 11:20 /bin -> usr/bin I: user script /srv/workspace/pbuilder/400044/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libanyevent-perl, libcanary-stability-perl, libcommon-sense-perl, libev-perl, libevent-perl, libguard-perl, perl-xs-dev, perl:native dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19785 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libanyevent-perl; however: Package libanyevent-perl is not installed. pbuilder-satisfydepends-dummy depends on libcanary-stability-perl; however: Package libcanary-stability-perl is not installed. pbuilder-satisfydepends-dummy depends on libcommon-sense-perl; however: Package libcommon-sense-perl is not installed. pbuilder-satisfydepends-dummy depends on libev-perl; however: Package libev-perl is not installed. pbuilder-satisfydepends-dummy depends on libevent-perl; however: Package libevent-perl is not installed. pbuilder-satisfydepends-dummy depends on libguard-perl; however: Package libguard-perl is not installed. pbuilder-satisfydepends-dummy depends on perl-xs-dev; however: Package perl-xs-dev is not installed. pbuilder-satisfydepends-dummy depends on perl:native. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libanyevent-perl{a} libarchive-zip-perl{a} libcanary-stability-perl{a} libcommon-sense-perl{a} libdebhelper-perl{a} libelf1t64{a} libev-perl{a} libevent-perl{a} libfile-stripnondeterminism-perl{a} libguard-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libperl-dev{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libasync-interrupt-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 37 newly installed, 0 to remove and 0 not upgraded. Need to get 22.6 MB of archives. After unpacking 85.5 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get: 2 http://deb.debian.org/debian trixie/main amd64 libmagic-mgc amd64 1:5.45-3+b1 [314 kB] Get: 3 http://deb.debian.org/debian trixie/main amd64 libmagic1t64 amd64 1:5.45-3+b1 [108 kB] Get: 4 http://deb.debian.org/debian trixie/main amd64 file amd64 1:5.45-3+b1 [43.3 kB] Get: 5 http://deb.debian.org/debian trixie/main amd64 gettext-base amd64 0.23.1-1 [243 kB] Get: 6 http://deb.debian.org/debian trixie/main amd64 libuchardet0 amd64 0.0.8-1+b2 [68.9 kB] Get: 7 http://deb.debian.org/debian trixie/main amd64 groff-base amd64 1.23.0-7 [1185 kB] Get: 8 http://deb.debian.org/debian trixie/main amd64 bsdextrautils amd64 2.40.4-5 [92.4 kB] Get: 9 http://deb.debian.org/debian trixie/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get: 10 http://deb.debian.org/debian trixie/main amd64 man-db amd64 2.13.0-1 [1420 kB] Get: 11 http://deb.debian.org/debian trixie/main amd64 m4 amd64 1.4.19-7 [294 kB] Get: 12 http://deb.debian.org/debian trixie/main amd64 autoconf all 2.72-3 [493 kB] Get: 13 http://deb.debian.org/debian trixie/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian trixie/main amd64 automake all 1:1.17-3 [862 kB] Get: 15 http://deb.debian.org/debian trixie/main amd64 autopoint all 0.23.1-1 [770 kB] Get: 16 http://deb.debian.org/debian trixie/main amd64 libdebhelper-perl all 13.24.1 [90.9 kB] Get: 17 http://deb.debian.org/debian trixie/main amd64 libtool all 2.5.4-4 [539 kB] Get: 18 http://deb.debian.org/debian trixie/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian trixie/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian trixie/main amd64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 21 http://deb.debian.org/debian trixie/main amd64 dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 22 http://deb.debian.org/debian trixie/main amd64 libelf1t64 amd64 0.192-4 [189 kB] Get: 23 http://deb.debian.org/debian trixie/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get: 24 http://deb.debian.org/debian trixie/main amd64 libunistring5 amd64 1.3-1 [476 kB] Get: 25 http://deb.debian.org/debian trixie/main amd64 libicu72 amd64 72.1-6 [9421 kB] Get: 26 http://deb.debian.org/debian trixie/main amd64 libxml2 amd64 2.12.7+dfsg+really2.9.14-0.2+b2 [699 kB] Get: 27 http://deb.debian.org/debian trixie/main amd64 gettext amd64 0.23.1-1 [1680 kB] Get: 28 http://deb.debian.org/debian trixie/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian trixie/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian trixie/main amd64 debhelper all 13.24.1 [920 kB] Get: 31 http://deb.debian.org/debian trixie/main amd64 libanyevent-perl amd64 7.170-2+b7 [384 kB] Get: 32 http://deb.debian.org/debian trixie/main amd64 libcanary-stability-perl all 2013-1 [7884 B] Get: 33 http://deb.debian.org/debian trixie/main amd64 libcommon-sense-perl amd64 3.75-3+b5 [22.9 kB] Get: 34 http://deb.debian.org/debian trixie/main amd64 libev-perl amd64 4.34-1+b4 [258 kB] Get: 35 http://deb.debian.org/debian trixie/main amd64 libevent-perl amd64 1.28-2+b3 [259 kB] Get: 36 http://deb.debian.org/debian trixie/main amd64 libguard-perl amd64 1.023-2+b4 [15.6 kB] Get: 37 http://deb.debian.org/debian trixie/main amd64 libperl-dev amd64 5.40.1-2 [1109 kB] Fetched 22.6 MB in 1s (44.4 MB/s) Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19785 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3+b1_amd64.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-1_amd64.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-7_amd64.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.4-5_amd64.deb ... Unpacking bsdextrautils (2.40.4-5) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_amd64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-7_amd64.deb ... Unpacking m4 (1.4.19-7) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-3_all.deb ... Unpacking automake (1:1.17-3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.24.1_all.deb ... Unpacking libdebhelper-perl (13.24.1) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.192-4_amd64.deb ... Unpacking libelf1t64:amd64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:amd64. Preparing to unpack .../23-libunistring5_1.3-1_amd64.deb ... Unpacking libunistring5:amd64 (1.3-1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../24-libicu72_72.1-6_amd64.deb ... Unpacking libicu72:amd64 (72.1-6) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../25-libxml2_2.12.7+dfsg+really2.9.14-0.2+b2_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b2) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.23.1-1_amd64.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.24.1_all.deb ... Unpacking debhelper (13.24.1) ... Selecting previously unselected package libanyevent-perl. Preparing to unpack .../30-libanyevent-perl_7.170-2+b7_amd64.deb ... Unpacking libanyevent-perl (7.170-2+b7) ... Selecting previously unselected package libcanary-stability-perl. Preparing to unpack .../31-libcanary-stability-perl_2013-1_all.deb ... Unpacking libcanary-stability-perl (2013-1) ... Selecting previously unselected package libcommon-sense-perl:amd64. Preparing to unpack .../32-libcommon-sense-perl_3.75-3+b5_amd64.deb ... Unpacking libcommon-sense-perl:amd64 (3.75-3+b5) ... Selecting previously unselected package libev-perl:amd64. Preparing to unpack .../33-libev-perl_4.34-1+b4_amd64.deb ... Unpacking libev-perl:amd64 (4.34-1+b4) ... Selecting previously unselected package libevent-perl. Preparing to unpack .../34-libevent-perl_1.28-2+b3_amd64.deb ... Unpacking libevent-perl (1.28-2+b3) ... Selecting previously unselected package libguard-perl. Preparing to unpack .../35-libguard-perl_1.023-2+b4_amd64.deb ... Unpacking libguard-perl (1.023-2+b4) ... Selecting previously unselected package libperl-dev:amd64. Preparing to unpack .../36-libperl-dev_5.40.1-2_amd64.deb ... Unpacking libperl-dev:amd64 (5.40.1-2) ... Setting up libanyevent-perl (7.170-2+b7) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up libicu72:amd64 (72.1-6) ... Setting up bsdextrautils (2.40.4-5) ... Setting up libevent-perl (1.28-2+b3) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.1) ... Setting up libmagic1t64:amd64 (1:5.45-3+b1) ... Setting up libcommon-sense-perl:amd64 (3.75-3+b5) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-7) ... Setting up libperl-dev:amd64 (5.40.1-2) ... Setting up file (1:5.45-3+b1) ... Setting up libcanary-stability-perl (2013-1) ... Setting up libelf1t64:amd64 (0.192-4) ... Setting up autotools-dev (20220109.1) ... Setting up libunistring5:amd64 (1.3-1) ... Setting up autopoint (0.23.1-1) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b2) ... Setting up libev-perl:amd64 (4.34-1+b4) ... Setting up libguard-perl (1.023-2+b4) ... Setting up libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.2+b2) ... Setting up automake (1:1.17-3) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.24.1) ... Processing triggers for libc-bin (2.41-4) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/libcoro-perl-6.570/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libcoro-perl_6.570-3_source.changes dpkg-buildpackage: info: source package libcoro-perl dpkg-buildpackage: info: source version 6.570-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libcoro-perl-6.570=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libcoro-perl-6.570=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now" *** *** Canary::Stability COMPATIBILITY AND SUPPORT CHECK *** ================================================= *** *** Hi! *** *** I do my best to provide predictable and reliable software. *** *** However, in recent releases, P5P (who maintain perl) have been *** introducing regressions that are sometimes subtle and at other times *** catastrophic, often for personal preferences with little or no concern *** for existing code, most notably CPAN. *** *** For this reason, it has become very hard for me to maintain the level *** of reliability and support I have committed myself to in the past, at *** least with some perl versions: I simply can't keep up working around new *** bugs or gratituous incompatibilities, and in turn you might suffer from *** unanticipated problems. *** *** Therefore I have introduced a support and compatibility check, the results *** of which follow below, together with a FAQ and some recommendations. *** *** This check is just to let you know that there might be a risk, so you can *** make judgement calls on how to proceed - it will not keep the module from *** installing or working. *** *** The stability canary says: (nothing, it was driven away by harsh weather) *** *** It seems you are running perl version 5.040001, likely the "official" or *** "standard" version. While there is nothing wrong with doing that, *** standard perl versions 5.022 and up are not supported by Coro. *** While this might be fatal, it might also be all right - if you run into *** problems, you might want to downgrade your perl or switch to the *** stability branch. *** *** If everything works fine, you can ignore this message. *** *** *** Stability canary mini-FAQ: *** *** Do I need to do anything? *** With luck, no. While some distributions are known to fail *** already, most should probably work. This message is here *** to alert you that your perl is not supported by Coro, *** and if things go wrong, you either need to downgrade, or *** sidegrade to the stability variant of your perl version, *** or simply live with the consequences. *** *** What is this canary thing? *** It's purpose is to check support status of Coro with *** respect to your perl version. *** *** What is this "stability branch"? *** It's a branch or fork of the official perl, by schmorp, to *** improve stability and compatibility with existing modules. *** *** How can I skip this prompt on automated installs? *** Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment. *** More info is in the Canary::Stability manpage. *** *** Long version of this FAQ: http://stableperl.schmorp.de/faq.html *** Stability Branch homepage: http://stableperl.schmorp.de/ *** Continue anyways? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Event version 1.28 found, building Event support. EV version 4.34 found, building EV support. Checking if your kit is complete... Looks good *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro has a number of configuration options. Due to its maturity, the defaults that Coro chooses are usually fine, so you can decide to skip these questions. Only if something went wrong you should select 'n' here and manually configure Coro, and, of course, report this to the maintainer :) Skip further questions and use defaults (y/n)? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use a number of methods to implement coroutines at the C level. The default chosen is based on your current confguration and is correct in most cases, but you still can chose between these alternatives: u The unix 'ucontext.h' functions are relatively new and not implemented or well-tested in older unices. They allow very fast coroutine creation and reasonably fast switching. They are, however, usually slower than the other alternatives due to an extra syscall done by swapcontext. And while nominally most portable (it's the only POSIX-standardised interface for coroutines), ucontext functions are, as usual, broken on most/all BSDs. s If the ucontext functions are not working or you don't want to use them for other reasons you can try a workaround using setjmp/longjmp/sigaltstack (also standard unix functions). Coroutine creation is rather slow, but switching is very fast (often much faster than with the ucontext functions). Unfortunately, glibc-2.1 and below don't even feature a working sigaltstack. You cannot use this implementation if some other code uses SIGUSR2 or you plan to create coroutines from an alternative signal stack, as both are being used for coroutine creation. a Handcoded assembly. This is the fastest and most compatible method, with the least side effects, if it works, that is. It has been tested on GNU/Linux x86 and x86_64 systems and should work on all x86/x86_64 systems using the SVR ELF ABI (it is also reported to be working on Strawberry Perl for Windows using MinGW). This is the recommended method on supported platforms. When it doesn't work, use another method, such as (s)etjmp/longjmp. l GNU/Linux. Very old GNU/Linux systems (glibc-2.1 and below) need this hack. Since it is very linux-specific it is also quite fast and recommended even for newer versions; when it works, that is (currently x86 and a few others only. If it compiles, it's usually ok). Newer glibc versions (>= 2.5) stop working with this implementation however. i IRIX. For some reason, SGI really does not like to follow POSIX (does that surprise you?), so this workaround might be needed (it's fast), although [s] and [u] should also work now. w Microsoft Windows. Try this on Microsoft Windows when using Cygwin or the MSVC compilers (e.g. ActiveState Perl, but see "a" for Strawberry Perl), although, as there is no standard on how to do this under windows, different environments might work differently. Doh. f Microsoft Windows. Try this on Microsoft Windows if w fails. It is slower and uses a lot more memory, but should be working all the time. p Use pthread API. Try to avoid this option, it was only created to make a point about the programming language shootout. It is unlikely to work with perls that have windows process emulation enabled ("perl threads"). It is also likely the slowest method of implementing coroutines. It might work fine as a last resort, however, as the pthread API is slightly better tested than ucontext functions for example. Of course, not on BSDs, who usually have very broken pthread implementations. Coro tries hard to come up with a suitable default for most systems, so pressing return at the prompt usually does the right thing. If you experience problems (e.g. make test fails) then you should experiment with this setting. Use which implementation, etjmp, ctx, sm, rix, inux,

threads, indows, iber? [a] a Using handcoded assembler implementation *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Per-context stack size factor: Depending on your settings, Coro tries to share the C stacks is creates as much as possible, but sometimes it needs to allocate a new one. This setting controls the maximum size that gets allocated, and should not be set too high, as memory and address space still is wasted even if it's not fully used. The value entered will be multiplied by sizeof(void *), which is usually 4 on 32-bit systems, and 8 on 64-bit systems. A setting of 16384 (the default) therefore corresponds to a 64k..128k stack, which usually is ample space (you might even want to try 8192 or lower if your program creates many coroutines). On systems supporting mmap and dynamic memory management, the actual memory usually gets allocated on demand, but with many large stacks you can still run out of address space on your typical 32 bit platform (not to forget the pagetables). Some perls (mostly threaded ones and perl compiled under linux 2.6) and some programs (inefficient regexes can use a lot of stack space) may need much, much more: If Coro segfaults with weird backtraces (e.g. in a function prologue) or in t/10_bugs.t, you might want to increase this to 65536 or more. The default should be fine, and can be changed at runtime with Coro::State::cctx_stacksize. C stack size factor? [16384] 16384 using a stacksize of 16384 * sizeof(void*) *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can optionally put a guard area before each stack segment: When the stack is too small and the access is not too far outside the stack (i.e. within the guard area), then the program will safely segfault instead of running into other data. The cost is some additional overhead with is usually negligible, and extra use of address space. The guard area size currently needs to be specified in pages (typical pagesizes are 4k and 8k). The guard area is only enabled on a few hardcoded architectures and is ignored on others. The actual preprocessor expression disables this feature if: !__i386 && !__x86_64 && !__powerpc && !__m68k && !__alpha && !__mips && !__sparc64 The default, as usual, should be just fine. Number of guard pages (0 disables)? [4] 4 *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can tell valgrind about its stacks and so reduce spurious warnings where valgrind would otherwise complain about possible stack switches. Enabling this does not incur noticable runtime or memory overhead, but it requires that you have the header file available. Valgrind support is completely optional, so disabling it is the safe choice. Enable valgrind support (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use (or even trick) some perl functions into doing what it needs instead of relying on (some) of its own functions. This might increase chances that it compiles and works, but it could just as well result in memory leaks, crashes or silent data corruption. It certainly does result in slightly slower speed and higher memory consumption, though, so YOU SHOULD ENABLE THIS OPTION ONLY AS A LAST RESORT. Prefer perl functions over coro functions (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use a simple JIT compiler to compile a part of the thread switch function at runtime. On perls with windows process emulation (most!), this results in a 50% speed improvement. On sane perls, the gain is much less, usually around 5%. If you enable this option, then the JIT will be enabled, on compatible operating systems and CPUs (currently only x86/amd64 on certain unix clones). Otherwise, it will be disabled. It should be safe to leave on - this setting is only here so you can switch it off in case of problems. Note that some broken kernels (often calling themselves "hardened") break all JIT generation by manipulating some system calls. If you get bus errors or segmentation faults immediately when the JIT is enabled but not without, then note that disabling the JIT only fixes some symptoms, not the underlying problem, and you might run into other problems later. Try to use the JIT compiler, if available? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro has experimental support for cloning states. This can be used to implement a scheme-like call/cc. However, this doesn't add to the expressiveness in general, and is likely perl-version specific (and perl 5.12 deliberately removed support for it). As such, it is disabled by default. Enable it when you want to play around with it, but note that it isn't supported, and unlikely ever will be. It exists mainly to prove that it could be done - if only it were useful for something. Implement Coro::State->clone method (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Writing MYMETA.yml and MYMETA.json Writing MYMETA.yml and MYMETA.json Writing MYMETA.yml and MYMETA.json Generating a Unix-style Makefile Writing Makefile for Coro Writing MYMETA.yml and MYMETA.json dh_auto_build make -j12 make[1]: Entering directory '/build/reproducible-path/libcoro-perl-6.570' make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/Coro' Running Mkbootstrap for State () "/usr/bin/perl" "/usr/share/perl/5.40.1/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' -typemap '/build/reproducible-path/libcoro-perl-6.570/Coro/typemap' State.xs > State.xsc cp Coro/AIO.pm blib/lib/Coro/AIO.pm cp Coro/Timer.pm blib/lib/Coro/Timer.pm cp Coro/Semaphore.pm blib/lib/Coro/Semaphore.pm cp Coro/Select.pm blib/lib/Coro/Select.pm cp Coro/Handle.pm blib/lib/Coro/Handle.pm cp Coro/jit-x86-unix.pl blib/lib/Coro/jit-x86-unix.pl cp Coro/Debug.pm blib/lib/Coro/Debug.pm cp Coro/CoroAPI.h blib/lib/Coro/CoroAPI.h cp Coro.pm blib/lib/Coro.pm cp Coro/jit-amd64-unix.pl blib/lib/Coro/jit-amd64-unix.pl cp Coro/Signal.pm blib/lib/Coro/Signal.pm cp Coro/Socket.pm blib/lib/Coro/Socket.pm cp Coro/Specific.pm blib/lib/Coro/Specific.pm cp Coro/AnyEvent.pm blib/lib/Coro/AnyEvent.pm cp Coro/SemaphoreSet.pm blib/lib/Coro/SemaphoreSet.pm cp Coro/LWP.pm blib/lib/Coro/LWP.pm cp Coro/MakeMaker.pm blib/lib/Coro/MakeMaker.pm cp Coro/Channel.pm blib/lib/Coro/Channel.pm cp Coro/State.pm blib/lib/Coro/State.pm cp Coro/Storable.pm blib/lib/Coro/Storable.pm cp Coro/BDB.pm blib/lib/Coro/BDB.pm cp Coro/Util.pm blib/lib/Coro/Util.pm cp Coro/RWLock.pm blib/lib/Coro/RWLock.pm chmod 644 "State.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 Skip ../blib/lib/Coro/RWLock.pm (unchanged) Skip ../blib/lib/Coro/Timer.pm (unchanged) cp Intro.pod ../blib/lib/Coro/Intro.pod Skip ../blib/lib/Coro/Select.pm (unchanged) Skip ../blib/lib/Coro/jit-x86-unix.pl (unchanged) Skip ../blib/lib/Coro/LWP.pm (unchanged) Skip ../blib/lib/Coro/MakeMaker.pm (unchanged) Skip ../blib/lib/Coro/Storable.pm (unchanged) Skip ../blib/lib/Coro/Handle.pm (unchanged) Skip ../blib/lib/Coro/SemaphoreSet.pm (unchanged) Skip ../blib/lib/Coro/Signal.pm (unchanged) Skip ../blib/lib/Coro/Debug.pm (unchanged) Skip ../blib/lib/Coro/AnyEvent.pm (unchanged) Skip ../blib/lib/Coro/Specific.pm (unchanged) Skip ../blib/lib/Coro/Channel.pm (unchanged) Skip ../blib/lib/Coro/Util.pm (unchanged) Skip ../blib/lib/Coro/State.pm (unchanged) Skip ../blib/lib/Coro/AIO.pm (unchanged) Skip ../blib/lib/Coro/BDB.pm (unchanged) Skip ../blib/lib/Coro/Socket.pm (unchanged) Skip ../blib/lib/Coro/jit-amd64-unix.pl (unchanged) Skip ../blib/lib/Coro/Semaphore.pm (unchanged) mv State.xsc State.c x86_64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libcoro-perl-6.570=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.57\" -DXS_VERSION=\"6.57\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" -DCORO_ASM -DCORO_STACKSIZE=16384 -DCORO_GUARDPAGES=4 -DCORO_JIT=1 State.c rm -f ../blib/arch/auto/Coro/State/State.so x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libcoro-perl-6.570=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong State.o -o ../blib/arch/auto/Coro/State/State.so \ \ chmod 755 ../blib/arch/auto/Coro/State/State.so Manifying 20 pod documents make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/Coro' make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/Event' Running Mkbootstrap for Event () "/usr/bin/perl" "/usr/share/perl/5.40.1/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' Event.xs > Event.xsc chmod 644 "Event.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 cp Event.pm ../blib/lib/Coro/Event.pm mv Event.xsc Event.c x86_64-linux-gnu-gcc -c -I/usr/lib/x86_64-linux-gnu/perl5/5.40/Event -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libcoro-perl-6.570=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.57\" -DXS_VERSION=\"6.57\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 Event.c rm -f ../blib/arch/auto/Coro/Event/Event.so x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libcoro-perl-6.570=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Event.o -o ../blib/arch/auto/Coro/Event/Event.so \ \ chmod 755 ../blib/arch/auto/Coro/Event/Event.so Manifying 1 pod document make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/Event' make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/EV' Running Mkbootstrap for EV () "/usr/bin/perl" "/usr/share/perl/5.40.1/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' EV.xs > EV.xsc chmod 644 "EV.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 cp EV.pm ../blib/lib/Coro/EV.pm mv EV.xsc EV.c x86_64-linux-gnu-gcc -c -I/usr/lib/x86_64-linux-gnu/perl5/5.40/EV -I/usr/lib/x86_64-linux-gnu/perl5/5.40 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libcoro-perl-6.570=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.57\" -DXS_VERSION=\"6.57\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 EV.c rm -f ../blib/arch/auto/Coro/EV/EV.so x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libcoro-perl-6.570=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong EV.o -o ../blib/arch/auto/Coro/EV/EV.so \ \ chmod 755 ../blib/arch/auto/Coro/EV/EV.so Manifying 1 pod document make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/EV' Manifying 20 pod documents make[1]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570' dh_auto_test make -j12 test TEST_VERBOSE=1 make[1]: Entering directory '/build/reproducible-path/libcoro-perl-6.570' make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/Coro' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 Manifying 20 pod documents make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/Coro' make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/Event' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 Manifying 1 pod document make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/Event' make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/EV' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 Manifying 1 pod document make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/EV' make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/Coro' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 No tests defined for Coro::State extension. make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/Coro' make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/Event' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, '../blib/lib', '../blib/arch')" t/*.t t/00_basic.t .... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/01_unblock.t .. 1..12 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok All tests successful. Files=2, Tests=17, 0 wallclock secs ( 0.01 usr 0.00 sys + 0.04 cusr 0.02 csys = 0.07 CPU) Result: PASS make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/Event' make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/EV' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, '../blib/lib', '../blib/arch')" t/*.t t/00_basic.t .... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/01_unblock.t .. 1..12 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok All tests successful. Files=2, Tests=17, 0 wallclock secs ( 0.01 usr 0.00 sys + 0.04 cusr 0.01 csys = 0.06 CPU) Result: PASS make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/EV' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00_basic.t .......... 1..9 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok t/01_process.t ........ 1..13 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok t/02_channel.t ........ 1..19 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok t/03_channel.t ........ 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/04_rwlock.t ......... 1..25 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok t/05_specific.t ....... 1..8 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok t/06_prio.t ........... 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/07_eval.t ........... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/08_join.t ........... 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/10_bugs.t ........... 1..3 ok 1 ok 2 ok 3 ok t/11_deadlock.t ....... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/12_exit.t ........... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/13_diewarn.t ........ 1..7 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok t/14_load.t ........... 1..17 ok 1 # Coro::State () ok 2 # Coro () ok 3 # Coro::MakeMaker () ok 4 # Coro::Signal () ok 5 # Coro::Semaphore () ok 6 # Coro::SemaphoreSet () ok 7 # Coro::Channel () ok 8 # Coro::Specific () ok 9 # Coro::RWLock () ok 10 # Coro::AnyEvent () ok 11 # Coro::Timer () ok 12 # Coro::Util () ok 13 # Coro::Select () ok 14 # Coro::Handle () ok 15 # Coro::Socket () ok 16 # Coro::Storable () ok 17 # Coro::Debug () ok t/15_semaphore.t ...... 1..6 ok 1 # 998 ok 2 ok 3 ok 4 ok 5 ok 6 ok t/16_signal.t ......... 1..18 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok t/17_rouse.t .......... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/18_winder.t ......... 1..17 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok t/19_handle.t ......... 1..4 ok 1 ok 2 ok 3 ok 4 ok t/20_mutual_cancel.t .. 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok All tests successful. Files=20, Tests=206, 0 wallclock secs ( 0.05 usr 0.01 sys + 0.26 cusr 0.03 csys = 0.35 CPU) Result: PASS make[1]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570' create-stamp debian/debhelper-build-stamp dh_prep debian/rules override_dh_auto_install make[1]: Entering directory '/build/reproducible-path/libcoro-perl-6.570' dh_auto_install make -j12 install DESTDIR=/build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[2]: Entering directory '/build/reproducible-path/libcoro-perl-6.570' make[3]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/Coro' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 Manifying 20 pod documents make[3]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/Coro' make[3]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/Event' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 Manifying 1 pod document make[3]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/Event' make[3]: Entering directory '/build/reproducible-path/libcoro-perl-6.570/EV' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 Manifying 1 pod document make[3]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570/EV' Manifying 20 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/Coro/Event/Event.so Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/Coro/State/State.so Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/Coro/EV/EV.so Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/State.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Debug.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Select.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/BDB.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Storable.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/LWP.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/jit-amd64-unix.pl Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/RWLock.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Socket.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/EV.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Intro.pod Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/jit-x86-unix.pl Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Channel.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/MakeMaker.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/SemaphoreSet.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Timer.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Signal.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Event.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Handle.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/AnyEvent.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/AIO.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Specific.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/CoroAPI.h Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Semaphore.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Util.pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Intro.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Storable.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::SemaphoreSet.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Handle.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Semaphore.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::MakeMaker.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::LWP.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Event.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Select.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::RWLock.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Channel.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::State.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Util.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::AIO.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::AnyEvent.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Timer.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Specific.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Signal.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Debug.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::BDB.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::Socket.3pm Installing /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/man/man3/Coro::EV.3pm make[2]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570' sed -i '1s|^#!/opt/bin/perl|#!/usr/bin/perl|' /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl//usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/*.pl make[1]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570' dh_installdocs dh_installchangelogs debian/rules override_dh_installexamples make[1]: Entering directory '/build/reproducible-path/libcoro-perl-6.570' dh_installexamples sed -i '1s|^#!/opt/bin/perl|#!/usr/bin/perl|' /build/reproducible-path/libcoro-perl-6.570/debian/libcoro-perl/usr/share/doc/libcoro-perl/examples/* make[1]: Leaving directory '/build/reproducible-path/libcoro-perl-6.570' dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib64/ld-linux-x86-64.so.2 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib64/ld-linux-x86-64.so.2.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libcoro-perl' in '../libcoro-perl_6.570-3_amd64.deb'. dpkg-deb: building package 'libcoro-perl-dbgsym' in '../libcoro-perl-dbgsym_6.570-3_amd64.deb'. dpkg-genbuildinfo --build=binary -O../libcoro-perl_6.570-3_amd64.buildinfo dpkg-genchanges --build=binary -O../libcoro-perl_6.570-3_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/400044 and its subdirectories I: Current time: Wed Mar 19 02:03:41 -12 2025 I: pbuilder-time-stamp: 1742393021 Wed Mar 19 14:03:42 UTC 2025 I: 1st build successful. Starting 2nd build on remote node infom02-amd64.debian.net. Wed Mar 19 14:03:42 UTC 2025 I: Preparing to do remote build '2' on infom02-amd64.debian.net. Wed Mar 19 14:06:13 UTC 2025 I: Deleting $TMPDIR on infom02-amd64.debian.net. Wed Mar 19 14:06:13 UTC 2025 I: libcoro-perl_6.570-3_amd64.changes: Format: 1.8 Date: Thu, 13 Oct 2022 16:29:37 +0100 Source: libcoro-perl Binary: libcoro-perl libcoro-perl-dbgsym Architecture: amd64 Version: 6.570-3 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libcoro-perl - Perl framework implementing coroutines Changes: libcoro-perl (6.570-3) unstable; urgency=medium . [ Debian Janitor ] * Apply multi-arch hints. + libcoro-perl: Drop Multi-Arch: same. Checksums-Sha1: a48f15dddf44bcf0d1e67b3f11f01f613e62a19c 186588 libcoro-perl-dbgsym_6.570-3_amd64.deb 9f68a7aa7b55d2baf15063e95031bbb6893386bb 5144 libcoro-perl_6.570-3_amd64.buildinfo 89dbea19621cecdcde2b6ac10a4d759411a5db16 219600 libcoro-perl_6.570-3_amd64.deb Checksums-Sha256: a84a11417901cacac8284a2d4302a78a315119a4851ea96cc7d93c82f51afc5b 186588 libcoro-perl-dbgsym_6.570-3_amd64.deb 4f8e3aa9a3a6f4d960002b95fab842cca7d312b6ecfca32bd0ee9ab25732e5fd 5144 libcoro-perl_6.570-3_amd64.buildinfo efbf8b13a76a24129c262245dde687101c2336948c3f97582cc537daa5a130b1 219600 libcoro-perl_6.570-3_amd64.deb Files: ea9e053f1a40d573e1258f5dc2027cc0 186588 debug optional libcoro-perl-dbgsym_6.570-3_amd64.deb 5521cb94957851912ce57cbe4ff3061e 5144 perl optional libcoro-perl_6.570-3_amd64.buildinfo b25bc8c065eb750d11a776fcea0797c7 219600 perl optional libcoro-perl_6.570-3_amd64.deb Wed Mar 19 14:06:14 UTC 2025 I: diffoscope 289 will be used to compare the two builds: Running as unit: rb-diffoscope-amd64_37-54529.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.TExDDuIr/libcoro-perl_6.570-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.TExDDuIr/libcoro-perl_6.570-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.TExDDuIr/libcoro-perl_6.570-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.TExDDuIr/b1/libcoro-perl_6.570-3_amd64.changes /srv/reproducible-results/rbuild-debian/r-b-build.TExDDuIr/b2/libcoro-perl_6.570-3_amd64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call diffoscope.comparators.binary.FilesystemFile ## main (total time: 0.003s) 0.003s 2 calls outputs 0.000s 1 call cleanup Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 233ms CPU time consumed: 234ms Wed Mar 19 14:06:15 UTC 2025 I: diffoscope 289 found no differences in the changes files, and a .buildinfo file also exists. Wed Mar 19 14:06:15 UTC 2025 I: libcoro-perl from trixie built successfully and reproducibly on amd64. Wed Mar 19 14:06:16 UTC 2025 I: Submitting .buildinfo files to external archives: Wed Mar 19 14:06:16 UTC 2025 I: Submitting 8.0K b1/libcoro-perl_6.570-3_amd64.buildinfo.asc Wed Mar 19 14:06:17 UTC 2025 I: Submitting 8.0K b2/libcoro-perl_6.570-3_amd64.buildinfo.asc Wed Mar 19 14:06:18 UTC 2025 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Wed Mar 19 14:06:18 UTC 2025 I: Done submitting .buildinfo files. Wed Mar 19 14:06:18 UTC 2025 I: Removing signed libcoro-perl_6.570-3_amd64.buildinfo.asc files: removed './b1/libcoro-perl_6.570-3_amd64.buildinfo.asc' removed './b2/libcoro-perl_6.570-3_amd64.buildinfo.asc'