Fri Feb 14 06:54:51 UTC 2025 I: starting to build libcgi-compress-gzip-perl/trixie/arm64 on jenkins on '2025-02-14 06:54'
Fri Feb 14 06:54:51 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_6/79466/console.log
Fri Feb 14 06:54:51 UTC 2025 I: Downloading source for trixie/libcgi-compress-gzip-perl=1.03-3
--2025-02-14 06:54:51-- http://deb.debian.org/debian/pool/main/libc/libcgi-compress-gzip-perl/libcgi-compress-gzip-perl_1.03-3.dsc
Connecting to 46.16.76.132:3128... connected.
Proxy request sent, awaiting response... 200 OK
Length: 2241 (2.2K) [text/prs.lines.tag]
Saving to: ‘libcgi-compress-gzip-perl_1.03-3.dsc’
0K .. 100% 256M=0s
2025-02-14 06:54:51 (256 MB/s) - ‘libcgi-compress-gzip-perl_1.03-3.dsc’ saved [2241/2241]
Fri Feb 14 06:54:51 UTC 2025 I: libcgi-compress-gzip-perl_1.03-3.dsc
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 3.0 (quilt)
Source: libcgi-compress-gzip-perl
Binary: libcgi-compress-gzip-perl
Architecture: all
Version: 1.03-3
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Uploaders: Robin Sheat <robin@catalyst.net.nz>
Homepage: https://metacpan.org/release/CGI-Compress-Gzip
Standards-Version: 3.9.6
Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libcgi-compress-gzip-perl
Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libcgi-compress-gzip-perl.git
Testsuite: autopkgtest-pkg-perl
Build-Depends: debhelper-compat (= 12), libmodule-build-perl
Build-Depends-Indep: perl, libcgi-pm-perl | perl (<< 5.19)
Package-List:
libcgi-compress-gzip-perl deb perl optional arch=all
Checksums-Sha1:
76acaf93644cf2439d62cb892a387a161e159554 13976 libcgi-compress-gzip-perl_1.03.orig.tar.gz
87b338fbdfb0aa6bbeeaa7d4684f07f716daac04 2052 libcgi-compress-gzip-perl_1.03-3.debian.tar.xz
Checksums-Sha256:
2cbb179e813eae8809a1cd3e1c5f73d8dea643d4f284c0d9f06db484c89386d2 13976 libcgi-compress-gzip-perl_1.03.orig.tar.gz
56852f1ca2c7f4f62fd7b72505d3fcd6ffb497a448ba1c1264d4ed95d0004e7e 2052 libcgi-compress-gzip-perl_1.03-3.debian.tar.xz
Files:
903f612e27aa63530eb61b186363fecd 13976 libcgi-compress-gzip-perl_1.03.orig.tar.gz
df87d822829ba10c55a09d7a9cb55719 2052 libcgi-compress-gzip-perl_1.03-3.debian.tar.xz
-----BEGIN PGP SIGNATURE-----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=OvJU
-----END PGP SIGNATURE-----
Fri Feb 14 06:54:51 UTC 2025 I: Checking whether the package is not for us
Fri Feb 14 06:54:51 UTC 2025 I: Starting 1st build on remote node codethink03-arm64.debian.net.
Fri Feb 14 06:54:51 UTC 2025 I: Preparing to do remote build '1' on codethink03-arm64.debian.net.
Fri Feb 14 06:55:32 UTC 2025 I: Deleting $TMPDIR on codethink03-arm64.debian.net.
I: pbuilder: network access will be disabled during build
I: Current time: Thu Mar 19 01:17:53 -12 2026
I: pbuilder-time-stamp: 1773926273
I: Building the build Environment
I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz]
I: copying local configuration
W: --override-config is not set; not updating apt.conf Read the manpage for details.
I: mounting /proc filesystem
I: mounting /sys filesystem
I: creating /{dev,run}/shm
I: mounting /dev/pts filesystem
I: redirecting /dev/ptmx to /dev/pts/ptmx
I: policy-rc.d already exists
I: Copying source file
I: copying [libcgi-compress-gzip-perl_1.03-3.dsc]
I: copying [./libcgi-compress-gzip-perl_1.03.orig.tar.gz]
I: copying [./libcgi-compress-gzip-perl_1.03-3.debian.tar.xz]
I: Extracting source
dpkg-source: warning: cannot verify inline signature for ./libcgi-compress-gzip-perl_1.03-3.dsc: unsupported subcommand
dpkg-source: info: extracting libcgi-compress-gzip-perl in libcgi-compress-gzip-perl-1.03
dpkg-source: info: unpacking libcgi-compress-gzip-perl_1.03.orig.tar.gz
dpkg-source: info: unpacking libcgi-compress-gzip-perl_1.03-3.debian.tar.xz
I: using fakeroot in build.
I: Installing the build-deps
I: user script /srv/workspace/pbuilder/100081/tmp/hooks/D02_print_environment starting
I: set
BUILDDIR='/build/reproducible-path'
BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other'
BUILDUSERNAME='pbuilder1'
BUILD_ARCH='arm64'
DEBIAN_FRONTEND='noninteractive'
DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 '
DISTRIBUTION='trixie'
HOME='/root'
HOST_ARCH='arm64'
IFS='
'
INVOCATION_ID='659b6a6a1f72416f805f8d5f9a86948b'
LANG='C'
LANGUAGE='en_US:en'
LC_ALL='C'
MAIL='/var/mail/root'
OPTIND='1'
PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games'
PBCURRENTCOMMANDLINEOPERATION='build'
PBUILDER_OPERATION='build'
PBUILDER_PKGDATADIR='/usr/share/pbuilder'
PBUILDER_PKGLIBDIR='/usr/lib/pbuilder'
PBUILDER_SYSCONFDIR='/etc'
PPID='100081'
PS1='# '
PS2='> '
PS4='+ '
PWD='/'
SHELL='/bin/bash'
SHLVL='2'
SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.OY2Lc5n2/pbuilderrc_gnyf --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.OY2Lc5n2/b1 --logfile b1/build.log libcgi-compress-gzip-perl_1.03-3.dsc'
SUDO_GID='109'
SUDO_UID='104'
SUDO_USER='jenkins'
TERM='unknown'
TZ='/usr/share/zoneinfo/Etc/GMT+12'
USER='root'
_='/usr/bin/systemd-run'
http_proxy='http://192.168.101.4:3128'
I: uname -a
Linux codethink03-arm64 6.1.0-31-cloud-arm64 #1 SMP Debian 6.1.128-1 (2025-02-07) aarch64 GNU/Linux
I: ls -l /bin
lrwxrwxrwx 1 root root 7 Nov 22 2024 /bin -> usr/bin
I: user script /srv/workspace/pbuilder/100081/tmp/hooks/D02_print_environment finished
-> Attempting to satisfy build-dependencies
-> Creating pbuilder-satisfydepends-dummy package
Package: pbuilder-satisfydepends-dummy
Version: 0.invalid.0
Architecture: arm64
Maintainer: Debian Pbuilder Team <pbuilder-maint@lists.alioth.debian.org>
Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder
This package was created automatically by pbuilder to satisfy the
build-dependencies of the package being currently built.
Depends: debhelper-compat (= 12), libmodule-build-perl, perl, libcgi-pm-perl | perl (<< 5.19)
dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'.
Selecting previously unselected package pbuilder-satisfydepends-dummy.
(Reading database ... 19922 files and directories currently installed.)
Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ...
Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ...
dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested:
pbuilder-satisfydepends-dummy depends on debhelper-compat (= 12); however:
Package debhelper-compat is not installed.
pbuilder-satisfydepends-dummy depends on libmodule-build-perl; however:
Package libmodule-build-perl is not installed.
pbuilder-satisfydepends-dummy depends on libcgi-pm-perl | perl (<< 5.19); however:
Package libcgi-pm-perl is not installed.
Version of perl on system is 5.40.0-8.
Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ...
Reading package lists...
Building dependency tree...
Reading state information...
Initializing package states...
Writing extended state information...
Building tag database...
pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0)
pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0)
The following NEW packages will be installed:
autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcgi-pm-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-stripnondeterminism-perl{a} libhtml-parser-perl{a} libhtml-tagset-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libmodule-build-perl{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} liburi-perl{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a}
The following packages are RECOMMENDED but will NOT be installed:
curl libarchive-cpio-perl libcgi-fast-perl libhttp-message-perl libltdl-dev libmail-sendmail-perl libmodule-signature-perl libpod-readme-perl libsoftware-license-perl lynx wget
0 packages upgraded, 35 newly installed, 0 to remove and 0 not upgraded.
Need to get 20.8 MB of archives. After unpacking 81.9 MB will be used.
Writing extended state information...
Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB]
Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3+b1 [314 kB]
Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3+b1 [102 kB]
Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3+b1 [43.4 kB]
Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.23.1-1 [241 kB]
Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB]
Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-7 [1129 kB]
Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40.4-3 [92.0 kB]
Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB]
Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB]
Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-5 [284 kB]
Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3 [493 kB]
Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB]
Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.17-3 [862 kB]
Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.23.1-1 [770 kB]
Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.24.1 [90.9 kB]
Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.5.4-3 [539 kB]
Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB]
Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB]
Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB]
Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.1-2 [8620 B]
Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.192-4 [189 kB]
Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB]
Get: 24 http://deb.debian.org/debian trixie/main arm64 libunistring5 arm64 1.3-1 [449 kB]
Get: 25 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-6 [9239 kB]
Get: 26 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB]
Get: 27 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.23.1-1 [1610 kB]
Get: 28 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB]
Get: 29 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB]
Get: 30 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.24.1 [920 kB]
Get: 31 http://deb.debian.org/debian trixie/main arm64 libhtml-tagset-perl all 3.24-1 [14.7 kB]
Get: 32 http://deb.debian.org/debian trixie/main arm64 liburi-perl all 5.30-1 [105 kB]
Get: 33 http://deb.debian.org/debian trixie/main arm64 libhtml-parser-perl arm64 3.83-1+b2 [97.5 kB]
Get: 34 http://deb.debian.org/debian trixie/main arm64 libcgi-pm-perl all 4.67-1 [217 kB]
Get: 35 http://deb.debian.org/debian trixie/main arm64 libmodule-build-perl all 0.423400-2 [252 kB]
Fetched 20.8 MB in 0s (94.8 MB/s)
Preconfiguring packages ...
Selecting previously unselected package sensible-utils.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 19922 files and directories currently installed.)
Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ...
Unpacking sensible-utils (0.0.24) ...
Selecting previously unselected package libmagic-mgc.
Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_arm64.deb ...
Unpacking libmagic-mgc (1:5.45-3+b1) ...
Selecting previously unselected package libmagic1t64:arm64.
Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_arm64.deb ...
Unpacking libmagic1t64:arm64 (1:5.45-3+b1) ...
Selecting previously unselected package file.
Preparing to unpack .../03-file_1%3a5.45-3+b1_arm64.deb ...
Unpacking file (1:5.45-3+b1) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../04-gettext-base_0.23.1-1_arm64.deb ...
Unpacking gettext-base (0.23.1-1) ...
Selecting previously unselected package libuchardet0:arm64.
Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ...
Unpacking libuchardet0:arm64 (0.0.8-1+b2) ...
Selecting previously unselected package groff-base.
Preparing to unpack .../06-groff-base_1.23.0-7_arm64.deb ...
Unpacking groff-base (1.23.0-7) ...
Selecting previously unselected package bsdextrautils.
Preparing to unpack .../07-bsdextrautils_2.40.4-3_arm64.deb ...
Unpacking bsdextrautils (2.40.4-3) ...
Selecting previously unselected package libpipeline1:arm64.
Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ...
Unpacking libpipeline1:arm64 (1.5.8-1) ...
Selecting previously unselected package man-db.
Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ...
Unpacking man-db (2.13.0-1) ...
Selecting previously unselected package m4.
Preparing to unpack .../10-m4_1.4.19-5_arm64.deb ...
Unpacking m4 (1.4.19-5) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../11-autoconf_2.72-3_all.deb ...
Unpacking autoconf (2.72-3) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../13-automake_1%3a1.17-3_all.deb ...
Unpacking automake (1:1.17-3) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../14-autopoint_0.23.1-1_all.deb ...
Unpacking autopoint (0.23.1-1) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../15-libdebhelper-perl_13.24.1_all.deb ...
Unpacking libdebhelper-perl (13.24.1) ...
Selecting previously unselected package libtool.
Preparing to unpack .../16-libtool_2.5.4-3_all.deb ...
Unpacking libtool (2.5.4-3) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../17-dh-autoreconf_20_all.deb ...
Unpacking dh-autoreconf (20) ...
Selecting previously unselected package libarchive-zip-perl.
Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ...
Unpacking libarchive-zip-perl (1.68-1) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../20-dh-strip-nondeterminism_1.14.1-2_all.deb ...
Unpacking dh-strip-nondeterminism (1.14.1-2) ...
Selecting previously unselected package libelf1t64:arm64.
Preparing to unpack .../21-libelf1t64_0.192-4_arm64.deb ...
Unpacking libelf1t64:arm64 (0.192-4) ...
Selecting previously unselected package dwz.
Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ...
Unpacking dwz (0.15-1+b1) ...
Selecting previously unselected package libunistring5:arm64.
Preparing to unpack .../23-libunistring5_1.3-1_arm64.deb ...
Unpacking libunistring5:arm64 (1.3-1) ...
Selecting previously unselected package libicu72:arm64.
Preparing to unpack .../24-libicu72_72.1-6_arm64.deb ...
Unpacking libicu72:arm64 (72.1-6) ...
Selecting previously unselected package libxml2:arm64.
Preparing to unpack .../25-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ...
Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ...
Selecting previously unselected package gettext.
Preparing to unpack .../26-gettext_0.23.1-1_arm64.deb ...
Unpacking gettext (0.23.1-1) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.6) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ...
Unpacking po-debconf (1.0.21+nmu1) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../29-debhelper_13.24.1_all.deb ...
Unpacking debhelper (13.24.1) ...
Selecting previously unselected package libhtml-tagset-perl.
Preparing to unpack .../30-libhtml-tagset-perl_3.24-1_all.deb ...
Unpacking libhtml-tagset-perl (3.24-1) ...
Selecting previously unselected package liburi-perl.
Preparing to unpack .../31-liburi-perl_5.30-1_all.deb ...
Unpacking liburi-perl (5.30-1) ...
Selecting previously unselected package libhtml-parser-perl:arm64.
Preparing to unpack .../32-libhtml-parser-perl_3.83-1+b2_arm64.deb ...
Unpacking libhtml-parser-perl:arm64 (3.83-1+b2) ...
Selecting previously unselected package libcgi-pm-perl.
Preparing to unpack .../33-libcgi-pm-perl_4.67-1_all.deb ...
Unpacking libcgi-pm-perl (4.67-1) ...
Selecting previously unselected package libmodule-build-perl.
Preparing to unpack .../34-libmodule-build-perl_0.423400-2_all.deb ...
Adding 'diversion of /usr/bin/config_data to /usr/bin/config_data.diverted by libmodule-build-perl'
Adding 'diversion of /usr/share/man/man1/config_data.1.gz to /usr/share/man/man1/config_data.diverted.1.gz by libmodule-build-perl'
Unpacking libmodule-build-perl (0.423400-2) ...
Setting up libpipeline1:arm64 (1.5.8-1) ...
Setting up libicu72:arm64 (72.1-6) ...
Setting up bsdextrautils (2.40.4-3) ...
Setting up libmagic-mgc (1:5.45-3+b1) ...
Setting up libarchive-zip-perl (1.68-1) ...
Setting up libhtml-tagset-perl (3.24-1) ...
Setting up libdebhelper-perl (13.24.1) ...
Setting up libmagic1t64:arm64 (1:5.45-3+b1) ...
Setting up gettext-base (0.23.1-1) ...
Setting up m4 (1.4.19-5) ...
Setting up file (1:5.45-3+b1) ...
Setting up libelf1t64:arm64 (0.192-4) ...
Setting up libmodule-build-perl (0.423400-2) ...
Setting up autotools-dev (20220109.1) ...
Setting up libunistring5:arm64 (1.3-1) ...
Setting up autopoint (0.23.1-1) ...
Setting up autoconf (2.72-3) ...
Setting up dwz (0.15-1+b1) ...
Setting up sensible-utils (0.0.24) ...
Setting up libuchardet0:arm64 (0.0.8-1+b2) ...
Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ...
Setting up liburi-perl (5.30-1) ...
Setting up automake (1:1.17-3) ...
update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode
Setting up libfile-stripnondeterminism-perl (1.14.1-2) ...
Setting up gettext (0.23.1-1) ...
Setting up libtool (2.5.4-3) ...
Setting up intltool-debian (0.35.0+20060710.6) ...
Setting up dh-autoreconf (20) ...
Setting up dh-strip-nondeterminism (1.14.1-2) ...
Setting up groff-base (1.23.0-7) ...
Setting up libhtml-parser-perl:arm64 (3.83-1+b2) ...
Setting up po-debconf (1.0.21+nmu1) ...
Setting up libcgi-pm-perl (4.67-1) ...
Setting up man-db (2.13.0-1) ...
Not building database; man-db/auto-update is not 'true'.
Setting up debhelper (13.24.1) ...
Processing triggers for libc-bin (2.40-6) ...
Reading package lists...
Building dependency tree...
Reading state information...
Reading extended state information...
Initializing package states...
Writing extended state information...
Building tag database...
-> Finished parsing the build-deps
Reading package lists...
Building dependency tree...
Reading state information...
fakeroot is already the newest version (1.37-1).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
I: Building the package
I: Running cd /build/reproducible-path/libcgi-compress-gzip-perl-1.03/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libcgi-compress-gzip-perl_1.03-3_source.changes
dpkg-buildpackage: info: source package libcgi-compress-gzip-perl
dpkg-buildpackage: info: source version 1.03-3
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Jelmer Vernooij <jelmer@debian.org>
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture arm64
debian/rules clean
dh clean
dh_clean
debian/rules binary
dh binary
dh_update_autotools_config
dh_autoreconf
dh_auto_configure
/usr/bin/perl Build.PL --installdirs vendor --config "optimize=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libcgi-compress-gzip-perl-1.03=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" --config "ld=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libcgi-compress-gzip-perl-1.03=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro"
Created MYMETA.yml and MYMETA.json
Creating new 'Build' script for 'CGI-Compress-Gzip' version '1.03'
dh_auto_build
/usr/bin/perl Build
Building CGI-Compress-Gzip
dh_auto_test
/usr/bin/perl Build test --verbose 1
(in cleanup) Can't locate object method "DESTROY" via package "CGI::Compress::Gzip" at /build/reproducible-path/libcgi-compress-gzip-perl-1.03/blib/lib/CGI/Compress/Gzip.pm line 463.
(in cleanup) Can't locate object method "DESTROY" via package "CGI::Compress::Gzip" at blib/lib/CGI/Compress/Gzip.pm line 463.
(in cleanup) Can't locate object method "DESTROY" via package "CGI::Compress::Gzip" at blib/lib/CGI/Compress/Gzip.pm line 463.
(in cleanup) Can't locate object method "DESTROY" via package "CGI::Compress::Gzip" at blib/lib/CGI/Compress/Gzip.pm line 463.
(in cleanup) Can't locate object method "DESTROY" via package "CGI::Compress::Gzip" at blib/lib/CGI/Compress/Gzip.pm line 463.
(in cleanup) Can't locate object method "DESTROY" via package "CGI::Compress::Gzip" at blib/lib/CGI/Compress/Gzip.pm line 463.
(in cleanup) Can't locate object method "DESTROY" via package "CGI::Compress::Gzip" at blib/lib/CGI/Compress/Gzip.pm line 463.
(in cleanup) Can't locate object method "DESTROY" via package "CGI::Compress::Gzip" at blib/lib/CGI/Compress/Gzip.pm line 463.
(in cleanup) Can't locate object method "DESTROY" via package "CGI::Compress::Gzip" at blib/lib/CGI/Compress/Gzip.pm line 463.
(in cleanup) Can't locate object method "DESTROY" via package "CGI::Compress::Gzip" at blib/lib/CGI/Compress/Gzip.pm line 463.
(in cleanup) Can't locate object method "DESTROY" via package "CGI::Compress::Gzip" at blib/lib/CGI/Compress/Gzip.pm line 463.
(in cleanup) Can't locate object method "DESTROY" via package "CGI::Compress::Gzip" at blib/lib/CGI/Compress/Gzip.pm line 463.
(in cleanup) Can't locate object method "DESTROY" via package "CGI::Compress::Gzip" at blib/lib/CGI/Compress/Gzip.pm line 463.
t/gzip.t ..........
1..44
ok 1 - use CGI::Compress::Gzip;
ok 2 - Compress::Zlib double-check
ok 3 - IO::Zlib test
ok 4 - compressible types
ok 5 - compressible types
ok 6 - compressible types
ok 7 - compressible types
ok 8 - compressible types
ok 9 - header test - env
ok 10 - header test - env
ok 11 - header test - env
ok 12 - header test - reason
ok 13 - header test - override
ok 14 - header test - override
ok 15 - header test - autoflush
ok 16 - header test - type
ok 17 - header test - type
ok 18 - header test - type
ok 19 - header test - type
ok 20 - header test - type
ok 21 - header test - type
ok 22 - header test - encoding
ok 23 - header test - encoding
ok 24 - header test - encoding
ok 25 - header test - status
ok 26 - header test - status
ok 27 - header test - status
ok 28 - header test - status
ok 29 - header test - status
ok 30 - header test - status
ok 31 - header test - other
ok 32 - Turn off compression
ok 33 - CGI template
ok 34 - no body
ok 35 - Gzipped CGI template
ok 36 - Gzipped CGI template with charset
ok 37 - Un-Gzipped with -Type flag
ok 38 - CGI redirect
ok 39 - unbuffered CGI
ok 40 - mod_perl simulation
ok 41 - double header
ok 42 - filehandle, fh=STDOUT plus select
not ok 43 - filehandle, explict STDOUT -- bodies do not match # TODO Explicit use of filehandles not yet supported
# Failed (TODO) test 'filehandle, explict STDOUT -- bodies do not match'
# at t/gzip.t line 386.
# got: 'Content-encoding: gzip
# Content-Type: text/html; charset=ISO-8859-1
#
# Hello World! �����������������'
# expected: 'Content-Encoding: gzip
# Content-Type: text/html; charset=ISO-8859-1
#
# ���������H���W�/�IQ�� ) ���'
not ok 44 - filehandle, explicit fh -- bodies do not match # TODO Explicit use of filehandles not yet supported
# Failed (TODO) test 'filehandle, explicit fh -- bodies do not match'
# at t/gzip.t line 386.
# got: 'Content-encoding: gzip
# Content-Type: text/html; charset=ISO-8859-1
#
# Hello World! �����������������'
# expected: 'Content-Encoding: gzip
# Content-Type: text/html; charset=ISO-8859-1
#
# ���������H���W�/�IQ�� ) ���'
ok
t/pod-coverage.t .. skipped: Author test
t/pod.t ........... skipped: Author test
All tests successful.
Files=3, Tests=44, 2 wallclock secs ( 0.03 usr 0.01 sys + 0.90 cusr 0.14 csys = 1.08 CPU)
Result: PASS
create-stamp debian/debhelper-build-stamp
dh_prep
dh_auto_install --destdir=debian/libcgi-compress-gzip-perl/
/usr/bin/perl Build install --destdir /build/reproducible-path/libcgi-compress-gzip-perl-1.03/debian/libcgi-compress-gzip-perl --create_packlist 0
Building CGI-Compress-Gzip
Installing /build/reproducible-path/libcgi-compress-gzip-perl-1.03/debian/libcgi-compress-gzip-perl/usr/share/perl5/CGI/Compress/Gzip.pm
Installing /build/reproducible-path/libcgi-compress-gzip-perl-1.03/debian/libcgi-compress-gzip-perl/usr/share/perl5/CGI/Compress/Gzip/FileHandle.pm
Installing /build/reproducible-path/libcgi-compress-gzip-perl-1.03/debian/libcgi-compress-gzip-perl/usr/share/man/man3/CGI::Compress::Gzip::FileHandle.3pm
Installing /build/reproducible-path/libcgi-compress-gzip-perl-1.03/debian/libcgi-compress-gzip-perl/usr/share/man/man3/CGI::Compress::Gzip.3pm
dh_installdocs
dh_installchangelogs
dh_installman
dh_perl
dh_link
dh_strip_nondeterminism
dh_compress
dh_fixperms
dh_missing
dh_installdeb
dh_gencontrol
dh_md5sums
dh_builddeb
dpkg-deb: building package 'libcgi-compress-gzip-perl' in '../libcgi-compress-gzip-perl_1.03-3_all.deb'.
dpkg-genbuildinfo --build=binary -O../libcgi-compress-gzip-perl_1.03-3_arm64.buildinfo
dpkg-genchanges --build=binary -O../libcgi-compress-gzip-perl_1.03-3_arm64.changes
dpkg-genchanges: info: binary-only upload (no source code included)
dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
dpkg-genchanges: info: not including original source code in upload
I: copying local configuration
I: unmounting dev/ptmx filesystem
I: unmounting dev/pts filesystem
I: unmounting dev/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
I: removing directory /srv/workspace/pbuilder/100081 and its subdirectories
I: Current time: Thu Mar 19 01:18:30 -12 2026
I: pbuilder-time-stamp: 1773926310
Fri Feb 14 06:55:32 UTC 2025 I: 1st build successful. Starting 2nd build on remote node codethink04-arm64.debian.net.
Fri Feb 14 06:55:33 UTC 2025 I: Preparing to do remote build '2' on codethink04-arm64.debian.net.
Fri Feb 14 06:56:03 UTC 2025 I: Deleting $TMPDIR on codethink04-arm64.debian.net.
Fri Feb 14 06:56:04 UTC 2025 I: libcgi-compress-gzip-perl_1.03-3_arm64.changes:
Format: 1.8
Date: Fri, 10 Jun 2022 00:45:19 +0100
Source: libcgi-compress-gzip-perl
Binary: libcgi-compress-gzip-perl
Architecture: all
Version: 1.03-3
Distribution: unstable
Urgency: medium
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Changed-By: Jelmer Vernooij <jelmer@debian.org>
Description:
libcgi-compress-gzip-perl - module to allow automatically compressed CGI output
Changes:
libcgi-compress-gzip-perl (1.03-3) unstable; urgency=medium
.
[ Salvatore Bonaccorso ]
* debian/control: Use HTTPS transport protocol for Vcs-Git URI
.
[ gregor herrmann ]
* debian/copyright: change Copyright-Format 1.0 URL to HTTPS.
.
[ Salvatore Bonaccorso ]
* Update Vcs-* headers for switch to salsa.debian.org
.
[ gregor herrmann ]
* debian/watch: use uscan version 4.
.
[ Debian Janitor ]
* Bump debhelper from old 9 to 12.
* Set debhelper-compat version in Build-Depends.
Checksums-Sha1:
68f4c39c2d384c63618b7a31ca1072263025e93a 18156 libcgi-compress-gzip-perl_1.03-3_all.deb
4f0c7fe0e8c9481a26ac475849ff369afdcce890 4816 libcgi-compress-gzip-perl_1.03-3_arm64.buildinfo
Checksums-Sha256:
b26e908b0f619a526d471548d8293a57fcde2ec965e245f4f8f5a8b233fdc4ce 18156 libcgi-compress-gzip-perl_1.03-3_all.deb
e38b04bc3cea464ce7c898952df72f017e5475b84ecb746e10b76fa07731d2f8 4816 libcgi-compress-gzip-perl_1.03-3_arm64.buildinfo
Files:
89e51a8a14dec0489c688d4500b4540f 18156 perl optional libcgi-compress-gzip-perl_1.03-3_all.deb
2badb526eafb3ce84adaff278479c0fb 4816 perl optional libcgi-compress-gzip-perl_1.03-3_arm64.buildinfo
Fri Feb 14 06:56:05 UTC 2025 I: diffoscope 288 will be used to compare the two builds:
Running as unit: rb-diffoscope-arm64_6-79466.service
# Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.OY2Lc5n2/libcgi-compress-gzip-perl_1.03-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.OY2Lc5n2/libcgi-compress-gzip-perl_1.03-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.OY2Lc5n2/libcgi-compress-gzip-perl_1.03-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.OY2Lc5n2/b1/libcgi-compress-gzip-perl_1.03-3_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.OY2Lc5n2/b2/libcgi-compress-gzip-perl_1.03-3_arm64.changes
## command (total time: 0.000s)
0.000s 1 call cmp (internal)
## has_same_content_as (total time: 0.000s)
0.000s 1 call diffoscope.comparators.binary.FilesystemFile
## main (total time: 0.003s)
0.003s 2 calls outputs
0.000s 1 call cleanup
Finished with result: success
Main processes terminated with: code=exited/status=0
Service runtime: 223ms
CPU time consumed: 223ms
Fri Feb 14 06:56:05 UTC 2025 I: diffoscope 288 found no differences in the changes files, and a .buildinfo file also exists.
Fri Feb 14 06:56:05 UTC 2025 I: libcgi-compress-gzip-perl from trixie built successfully and reproducibly on arm64.
Fri Feb 14 06:56:06 UTC 2025 I: Submitting .buildinfo files to external archives:
Fri Feb 14 06:56:06 UTC 2025 I: Submitting 8.0K b1/libcgi-compress-gzip-perl_1.03-3_arm64.buildinfo.asc
Fri Feb 14 06:56:07 UTC 2025 I: Submitting 8.0K b2/libcgi-compress-gzip-perl_1.03-3_arm64.buildinfo.asc
Fri Feb 14 06:56:08 UTC 2025 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit.
Fri Feb 14 06:56:08 UTC 2025 I: Done submitting .buildinfo files.
Fri Feb 14 06:56:08 UTC 2025 I: Removing signed libcgi-compress-gzip-perl_1.03-3_arm64.buildinfo.asc files:
removed './b1/libcgi-compress-gzip-perl_1.03-3_arm64.buildinfo.asc'
removed './b2/libcgi-compress-gzip-perl_1.03-3_arm64.buildinfo.asc'