Thu Jan 23 01:29:08 UTC 2025 I: starting to build libclass-default-perl/trixie/arm64 on jenkins on '2025-01-23 01:28'
Thu Jan 23 01:29:08 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_10/54768/console.log
Thu Jan 23 01:29:08 UTC 2025 I: Downloading source for trixie/libclass-default-perl=1.51-5
--2025-01-23 01:29:08-- http://deb.debian.org/debian/pool/main/libc/libclass-default-perl/libclass-default-perl_1.51-5.dsc
Connecting to 46.16.76.132:3128... connected.
Proxy request sent, awaiting response... 200 OK
Length: 2193 (2.1K) [text/prs.lines.tag]
Saving to: ‘libclass-default-perl_1.51-5.dsc’
0K .. 100% 384M=0s
2025-01-23 01:29:08 (384 MB/s) - ‘libclass-default-perl_1.51-5.dsc’ saved [2193/2193]
Thu Jan 23 01:29:08 UTC 2025 I: libclass-default-perl_1.51-5.dsc
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 3.0 (quilt)
Source: libclass-default-perl
Binary: libclass-default-perl
Architecture: all
Version: 1.51-5
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Uploaders: Allard Hoeve <allard@byte.nl>, gregor herrmann <gregoa@debian.org>
Homepage: https://metacpan.org/release/Class-Default
Standards-Version: 3.9.8
Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libclass-default-perl
Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libclass-default-perl.git
Testsuite: autopkgtest-pkg-perl
Build-Depends: debhelper-compat (= 13), libmodule-install-perl
Build-Depends-Indep: perl
Package-List:
libclass-default-perl deb perl optional arch=all
Checksums-Sha1:
e42193ff35a0d45cac5695190c3c41b88085c369 24677 libclass-default-perl_1.51.orig.tar.gz
0e485e79177b07d37779dcb5a6661b3a431d3bb4 3700 libclass-default-perl_1.51-5.debian.tar.xz
Checksums-Sha256:
adfb4eb7a05fe637b8934601176c15d33e5c4b4ca628f8a19babf6a1c5e3d3ed 24677 libclass-default-perl_1.51.orig.tar.gz
4543385b50aaf7400c3559336a3290e45bf34ffbe82c433d6d47edca30232c8d 3700 libclass-default-perl_1.51-5.debian.tar.xz
Files:
ff10355e5ac350f14ed3e5a427592abd 24677 libclass-default-perl_1.51.orig.tar.gz
0bff365aefa2690746bf3787d40636b5 3700 libclass-default-perl_1.51-5.debian.tar.xz
-----BEGIN PGP SIGNATURE-----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=n8iO
-----END PGP SIGNATURE-----
Thu Jan 23 01:29:08 UTC 2025 I: Checking whether the package is not for us
Thu Jan 23 01:29:08 UTC 2025 I: Starting 1st build on remote node codethink04-arm64.debian.net.
Thu Jan 23 01:29:08 UTC 2025 I: Preparing to do remote build '1' on codethink04-arm64.debian.net.
Thu Jan 23 01:29:35 UTC 2025 I: Deleting $TMPDIR on codethink04-arm64.debian.net.
I: pbuilder: network access will be disabled during build
I: Current time: Wed Jan 22 13:29:10 -12 2025
I: pbuilder-time-stamp: 1737595750
I: Building the build Environment
I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz]
I: copying local configuration
W: --override-config is not set; not updating apt.conf Read the manpage for details.
I: mounting /proc filesystem
I: mounting /sys filesystem
I: creating /{dev,run}/shm
I: mounting /dev/pts filesystem
I: redirecting /dev/ptmx to /dev/pts/ptmx
I: policy-rc.d already exists
I: Copying source file
I: copying [libclass-default-perl_1.51-5.dsc]
I: copying [./libclass-default-perl_1.51.orig.tar.gz]
I: copying [./libclass-default-perl_1.51-5.debian.tar.xz]
I: Extracting source
dpkg-source: warning: cannot verify inline signature for ./libclass-default-perl_1.51-5.dsc: unsupported subcommand
dpkg-source: info: extracting libclass-default-perl in libclass-default-perl-1.51
dpkg-source: info: unpacking libclass-default-perl_1.51.orig.tar.gz
dpkg-source: info: unpacking libclass-default-perl_1.51-5.debian.tar.xz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: applying 01-fix-manpage.diff
I: using fakeroot in build.
I: Installing the build-deps
I: user script /srv/workspace/pbuilder/2065933/tmp/hooks/D02_print_environment starting
I: set
BUILDDIR='/build/reproducible-path'
BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other'
BUILDUSERNAME='pbuilder1'
BUILD_ARCH='arm64'
DEBIAN_FRONTEND='noninteractive'
DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=12 '
DISTRIBUTION='trixie'
HOME='/root'
HOST_ARCH='arm64'
IFS='
'
INVOCATION_ID='30fd36df405944e797a3c440f4641408'
LANG='C'
LANGUAGE='en_US:en'
LC_ALL='C'
MAIL='/var/mail/root'
OPTIND='1'
PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games'
PBCURRENTCOMMANDLINEOPERATION='build'
PBUILDER_OPERATION='build'
PBUILDER_PKGDATADIR='/usr/share/pbuilder'
PBUILDER_PKGLIBDIR='/usr/lib/pbuilder'
PBUILDER_SYSCONFDIR='/etc'
PPID='2065933'
PS1='# '
PS2='> '
PS4='+ '
PWD='/'
SHELL='/bin/bash'
SHLVL='2'
SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.JZqfsPUz/pbuilderrc_z0kd --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.JZqfsPUz/b1 --logfile b1/build.log libclass-default-perl_1.51-5.dsc'
SUDO_GID='109'
SUDO_UID='104'
SUDO_USER='jenkins'
TERM='unknown'
TZ='/usr/share/zoneinfo/Etc/GMT+12'
USER='root'
_='/usr/bin/systemd-run'
http_proxy='http://192.168.101.4:3128'
I: uname -a
Linux codethink04-arm64 6.1.0-30-cloud-arm64 #1 SMP Debian 6.1.124-1 (2025-01-12) aarch64 GNU/Linux
I: ls -l /bin
lrwxrwxrwx 1 root root 7 Nov 22 14:40 /bin -> usr/bin
I: user script /srv/workspace/pbuilder/2065933/tmp/hooks/D02_print_environment finished
-> Attempting to satisfy build-dependencies
-> Creating pbuilder-satisfydepends-dummy package
Package: pbuilder-satisfydepends-dummy
Version: 0.invalid.0
Architecture: arm64
Maintainer: Debian Pbuilder Team <pbuilder-maint@lists.alioth.debian.org>
Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder
This package was created automatically by pbuilder to satisfy the
build-dependencies of the package being currently built.
Depends: debhelper-compat (= 13), libmodule-install-perl, perl
dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'.
Selecting previously unselected package pbuilder-satisfydepends-dummy.
(Reading database ... 19970 files and directories currently installed.)
Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ...
Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ...
dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested:
pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however:
Package debhelper-compat is not installed.
pbuilder-satisfydepends-dummy depends on libmodule-install-perl; however:
Package libmodule-install-perl is not installed.
Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ...
Reading package lists...
Building dependency tree...
Reading state information...
Initializing package states...
Writing extended state information...
Building tag database...
pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0)
pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0)
The following NEW packages will be installed:
autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libdebhelper-perl{a} libelf1t64{a} libfile-remove-perl{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libmodule-install-perl{a} libmodule-scandeps-perl{a} libpipeline1{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} libyaml-tiny-perl{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a}
The following packages are RECOMMENDED but will NOT be installed:
curl libarchive-cpio-perl libfile-homedir-perl libjson-perl libltdl-dev libmail-sendmail-perl libpar-dist-perl libwww-perl lynx wget
0 packages upgraded, 34 newly installed, 0 to remove and 0 not upgraded.
Need to get 20.1 MB of archives. After unpacking 80.5 MB will be used.
Writing extended state information...
Get: 1 http://deb.debian.org/debian trixie/main arm64 sensible-utils all 0.0.24 [24.8 kB]
Get: 2 http://deb.debian.org/debian trixie/main arm64 libmagic-mgc arm64 1:5.45-3+b1 [314 kB]
Get: 3 http://deb.debian.org/debian trixie/main arm64 libmagic1t64 arm64 1:5.45-3+b1 [102 kB]
Get: 4 http://deb.debian.org/debian trixie/main arm64 file arm64 1:5.45-3+b1 [43.4 kB]
Get: 5 http://deb.debian.org/debian trixie/main arm64 gettext-base arm64 0.22.5-4 [198 kB]
Get: 6 http://deb.debian.org/debian trixie/main arm64 libuchardet0 arm64 0.0.8-1+b2 [69.2 kB]
Get: 7 http://deb.debian.org/debian trixie/main arm64 groff-base arm64 1.23.0-7 [1129 kB]
Get: 8 http://deb.debian.org/debian trixie/main arm64 bsdextrautils arm64 2.40.4-1 [91.6 kB]
Get: 9 http://deb.debian.org/debian trixie/main arm64 libpipeline1 arm64 1.5.8-1 [40.2 kB]
Get: 10 http://deb.debian.org/debian trixie/main arm64 man-db arm64 2.13.0-1 [1404 kB]
Get: 11 http://deb.debian.org/debian trixie/main arm64 m4 arm64 1.4.19-5 [284 kB]
Get: 12 http://deb.debian.org/debian trixie/main arm64 autoconf all 2.72-3 [493 kB]
Get: 13 http://deb.debian.org/debian trixie/main arm64 autotools-dev all 20220109.1 [51.6 kB]
Get: 14 http://deb.debian.org/debian trixie/main arm64 automake all 1:1.16.5-1.3 [823 kB]
Get: 15 http://deb.debian.org/debian trixie/main arm64 autopoint all 0.22.5-4 [723 kB]
Get: 16 http://deb.debian.org/debian trixie/main arm64 libdebhelper-perl all 13.23 [90.6 kB]
Get: 17 http://deb.debian.org/debian trixie/main arm64 libtool all 2.5.4-2 [539 kB]
Get: 18 http://deb.debian.org/debian trixie/main arm64 dh-autoreconf all 20 [17.1 kB]
Get: 19 http://deb.debian.org/debian trixie/main arm64 libarchive-zip-perl all 1.68-1 [104 kB]
Get: 20 http://deb.debian.org/debian trixie/main arm64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB]
Get: 21 http://deb.debian.org/debian trixie/main arm64 dh-strip-nondeterminism all 1.14.0-1 [8448 B]
Get: 22 http://deb.debian.org/debian trixie/main arm64 libelf1t64 arm64 0.192-4 [189 kB]
Get: 23 http://deb.debian.org/debian trixie/main arm64 dwz arm64 0.15-1+b1 [102 kB]
Get: 24 http://deb.debian.org/debian trixie/main arm64 libunistring5 arm64 1.3-1 [449 kB]
Get: 25 http://deb.debian.org/debian trixie/main arm64 libicu72 arm64 72.1-6 [9239 kB]
Get: 26 http://deb.debian.org/debian trixie/main arm64 libxml2 arm64 2.12.7+dfsg+really2.9.14-0.2+b1 [630 kB]
Get: 27 http://deb.debian.org/debian trixie/main arm64 gettext arm64 0.22.5-4 [1532 kB]
Get: 28 http://deb.debian.org/debian trixie/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB]
Get: 29 http://deb.debian.org/debian trixie/main arm64 po-debconf all 1.0.21+nmu1 [248 kB]
Get: 30 http://deb.debian.org/debian trixie/main arm64 debhelper all 13.23 [919 kB]
Get: 31 http://deb.debian.org/debian trixie/main arm64 libfile-remove-perl all 1.61-2 [16.1 kB]
Get: 32 http://deb.debian.org/debian trixie/main arm64 libmodule-scandeps-perl all 1.37-1 [44.0 kB]
Get: 33 http://deb.debian.org/debian trixie/main arm64 libyaml-tiny-perl all 1.76-1 [29.8 kB]
Get: 34 http://deb.debian.org/debian trixie/main arm64 libmodule-install-perl all 1.21-2 [139 kB]
Fetched 20.1 MB in 0s (131 MB/s)
Preconfiguring packages ...
Selecting previously unselected package sensible-utils.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 19970 files and directories currently installed.)
Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ...
Unpacking sensible-utils (0.0.24) ...
Selecting previously unselected package libmagic-mgc.
Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3+b1_arm64.deb ...
Unpacking libmagic-mgc (1:5.45-3+b1) ...
Selecting previously unselected package libmagic1t64:arm64.
Preparing to unpack .../02-libmagic1t64_1%3a5.45-3+b1_arm64.deb ...
Unpacking libmagic1t64:arm64 (1:5.45-3+b1) ...
Selecting previously unselected package file.
Preparing to unpack .../03-file_1%3a5.45-3+b1_arm64.deb ...
Unpacking file (1:5.45-3+b1) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../04-gettext-base_0.22.5-4_arm64.deb ...
Unpacking gettext-base (0.22.5-4) ...
Selecting previously unselected package libuchardet0:arm64.
Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_arm64.deb ...
Unpacking libuchardet0:arm64 (0.0.8-1+b2) ...
Selecting previously unselected package groff-base.
Preparing to unpack .../06-groff-base_1.23.0-7_arm64.deb ...
Unpacking groff-base (1.23.0-7) ...
Selecting previously unselected package bsdextrautils.
Preparing to unpack .../07-bsdextrautils_2.40.4-1_arm64.deb ...
Unpacking bsdextrautils (2.40.4-1) ...
Selecting previously unselected package libpipeline1:arm64.
Preparing to unpack .../08-libpipeline1_1.5.8-1_arm64.deb ...
Unpacking libpipeline1:arm64 (1.5.8-1) ...
Selecting previously unselected package man-db.
Preparing to unpack .../09-man-db_2.13.0-1_arm64.deb ...
Unpacking man-db (2.13.0-1) ...
Selecting previously unselected package m4.
Preparing to unpack .../10-m4_1.4.19-5_arm64.deb ...
Unpacking m4 (1.4.19-5) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../11-autoconf_2.72-3_all.deb ...
Unpacking autoconf (2.72-3) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../14-autopoint_0.22.5-4_all.deb ...
Unpacking autopoint (0.22.5-4) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../15-libdebhelper-perl_13.23_all.deb ...
Unpacking libdebhelper-perl (13.23) ...
Selecting previously unselected package libtool.
Preparing to unpack .../16-libtool_2.5.4-2_all.deb ...
Unpacking libtool (2.5.4-2) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../17-dh-autoreconf_20_all.deb ...
Unpacking dh-autoreconf (20) ...
Selecting previously unselected package libarchive-zip-perl.
Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ...
Unpacking libarchive-zip-perl (1.68-1) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.14.0-1) ...
Selecting previously unselected package libelf1t64:arm64.
Preparing to unpack .../21-libelf1t64_0.192-4_arm64.deb ...
Unpacking libelf1t64:arm64 (0.192-4) ...
Selecting previously unselected package dwz.
Preparing to unpack .../22-dwz_0.15-1+b1_arm64.deb ...
Unpacking dwz (0.15-1+b1) ...
Selecting previously unselected package libunistring5:arm64.
Preparing to unpack .../23-libunistring5_1.3-1_arm64.deb ...
Unpacking libunistring5:arm64 (1.3-1) ...
Selecting previously unselected package libicu72:arm64.
Preparing to unpack .../24-libicu72_72.1-6_arm64.deb ...
Unpacking libicu72:arm64 (72.1-6) ...
Selecting previously unselected package libxml2:arm64.
Preparing to unpack .../25-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_arm64.deb ...
Unpacking libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ...
Selecting previously unselected package gettext.
Preparing to unpack .../26-gettext_0.22.5-4_arm64.deb ...
Unpacking gettext (0.22.5-4) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.6) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ...
Unpacking po-debconf (1.0.21+nmu1) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../29-debhelper_13.23_all.deb ...
Unpacking debhelper (13.23) ...
Selecting previously unselected package libfile-remove-perl.
Preparing to unpack .../30-libfile-remove-perl_1.61-2_all.deb ...
Unpacking libfile-remove-perl (1.61-2) ...
Selecting previously unselected package libmodule-scandeps-perl.
Preparing to unpack .../31-libmodule-scandeps-perl_1.37-1_all.deb ...
Unpacking libmodule-scandeps-perl (1.37-1) ...
Selecting previously unselected package libyaml-tiny-perl.
Preparing to unpack .../32-libyaml-tiny-perl_1.76-1_all.deb ...
Unpacking libyaml-tiny-perl (1.76-1) ...
Selecting previously unselected package libmodule-install-perl.
Preparing to unpack .../33-libmodule-install-perl_1.21-2_all.deb ...
Unpacking libmodule-install-perl (1.21-2) ...
Setting up libfile-remove-perl (1.61-2) ...
Setting up libpipeline1:arm64 (1.5.8-1) ...
Setting up libicu72:arm64 (72.1-6) ...
Setting up bsdextrautils (2.40.4-1) ...
Setting up libmagic-mgc (1:5.45-3+b1) ...
Setting up libarchive-zip-perl (1.68-1) ...
Setting up libdebhelper-perl (13.23) ...
Setting up libmagic1t64:arm64 (1:5.45-3+b1) ...
Setting up gettext-base (0.22.5-4) ...
Setting up m4 (1.4.19-5) ...
Setting up file (1:5.45-3+b1) ...
Setting up libyaml-tiny-perl (1.76-1) ...
Setting up libelf1t64:arm64 (0.192-4) ...
Setting up autotools-dev (20220109.1) ...
Setting up libunistring5:arm64 (1.3-1) ...
Setting up autopoint (0.22.5-4) ...
Setting up autoconf (2.72-3) ...
Setting up dwz (0.15-1+b1) ...
Setting up sensible-utils (0.0.24) ...
Setting up libuchardet0:arm64 (0.0.8-1+b2) ...
Setting up libxml2:arm64 (2.12.7+dfsg+really2.9.14-0.2+b1) ...
Setting up libmodule-scandeps-perl (1.37-1) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up libfile-stripnondeterminism-perl (1.14.0-1) ...
Setting up gettext (0.22.5-4) ...
Setting up libtool (2.5.4-2) ...
Setting up intltool-debian (0.35.0+20060710.6) ...
Setting up dh-autoreconf (20) ...
Setting up libmodule-install-perl (1.21-2) ...
Setting up dh-strip-nondeterminism (1.14.0-1) ...
Setting up groff-base (1.23.0-7) ...
Setting up po-debconf (1.0.21+nmu1) ...
Setting up man-db (2.13.0-1) ...
Not building database; man-db/auto-update is not 'true'.
Setting up debhelper (13.23) ...
Processing triggers for libc-bin (2.40-5) ...
Reading package lists...
Building dependency tree...
Reading state information...
Reading extended state information...
Initializing package states...
Writing extended state information...
Building tag database...
-> Finished parsing the build-deps
Reading package lists...
Building dependency tree...
Reading state information...
fakeroot is already the newest version (1.36.2-1).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
I: Building the package
I: Running cd /build/reproducible-path/libclass-default-perl-1.51/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libclass-default-perl_1.51-5_source.changes
dpkg-buildpackage: info: source package libclass-default-perl
dpkg-buildpackage: info: source version 1.51-5
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Jelmer Vernooij <jelmer@debian.org>
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture arm64
fakeroot debian/rules clean
dh clean
dh_clean
debian/rules build
dh build
dh_update_autotools_config
dh_autoreconf
dh_auto_configure
/usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libclass-default-perl-1.51=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wdate-time -D_FORTIFY_SOURCE=2" "LD=aarch64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/libclass-default-perl-1.51=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -mbranch-protection=standard -Wl,-z,relro"
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Class::Default
Writing MYMETA.yml and MYMETA.json
dh_auto_build
make -j12
make[1]: Entering directory '/build/reproducible-path/libclass-default-perl-1.51'
cp lib/Class/Default.pm blib/lib/Class/Default.pm
Manifying 1 pod document
make[1]: Leaving directory '/build/reproducible-path/libclass-default-perl-1.51'
dh_auto_test
make -j12 test TEST_VERBOSE=1
make[1]: Entering directory '/build/reproducible-path/libclass-default-perl-1.51'
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/*.t
t/01_compile.t ..
1..2
ok 1 - Your perl is new enough
ok 2 - use Class::Default;
ok
t/02_main.t .....
1..20
ok 1 - Class::Default->_self exists
ok 2 - Class::Default->_get_default exists
ok 3 - Class::Default->_create_default_object exists
ok 4 - Class::Default::Test1->_self exists
ok 5 - Class::Default::Test1->_get_default exists
ok 6 - Class::Default::Test1->_create_default_object exists
ok 7 - An object of class 'Class::Default::Test1' isa 'Class::Default::Test1'
ok 8 - An object of class 'Class::Default::Test1' isa 'Class::Default'
ok 9 - DEFAULT hash remains empty after normal object creation
ok 10 - ->_get_default returns something
ok 11 - ->_get_default returns the correct object type
ok 12 - DEFAULT hash contains something after _get_default
ok 13 - DEFAULT hash contains only one thing after _get_default
ok 14 - DEFAULT hash contains the correct key after _get_Default
ok 15 - DEFAULT hash entry matches that returned
ok 16 - Second object matches the first object
ok 17 - Result of basic object method matchs
ok 18 - Result of basic static method matchs
ok 19 - Static ->_class returns the class
ok 20 - Object ->_class returns the class
ok
t/98_pod.t ...... skipped: Author tests not required for installation
t/99_pmv.t ...... skipped: Author tests not required for installation
All tests successful.
Files=4, Tests=22, 1 wallclock secs ( 0.04 usr 0.01 sys + 0.33 cusr 0.09 csys = 0.47 CPU)
Result: PASS
make[1]: Leaving directory '/build/reproducible-path/libclass-default-perl-1.51'
create-stamp debian/debhelper-build-stamp
fakeroot debian/rules binary
dh binary
dh_testroot
dh_prep
dh_auto_install --destdir=debian/libclass-default-perl/
make -j12 install DESTDIR=/build/reproducible-path/libclass-default-perl-1.51/debian/libclass-default-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
make[1]: Entering directory '/build/reproducible-path/libclass-default-perl-1.51'
Manifying 1 pod document
Installing /build/reproducible-path/libclass-default-perl-1.51/debian/libclass-default-perl/usr/share/perl5/Class/Default.pm
Installing /build/reproducible-path/libclass-default-perl-1.51/debian/libclass-default-perl/usr/share/man/man3/Class::Default.3pm
make[1]: Leaving directory '/build/reproducible-path/libclass-default-perl-1.51'
dh_installdocs
dh_installchangelogs
dh_installman
dh_perl
dh_link
dh_strip_nondeterminism
dh_compress
dh_fixperms
dh_missing
dh_installdeb
dh_gencontrol
dh_md5sums
dh_builddeb
dpkg-deb: building package 'libclass-default-perl' in '../libclass-default-perl_1.51-5_all.deb'.
dpkg-genbuildinfo --build=binary -O../libclass-default-perl_1.51-5_arm64.buildinfo
dpkg-genchanges --build=binary -O../libclass-default-perl_1.51-5_arm64.changes
dpkg-genchanges: info: binary-only upload (no source code included)
dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
dpkg-genchanges: info: not including original source code in upload
I: copying local configuration
I: unmounting dev/ptmx filesystem
I: unmounting dev/pts filesystem
I: unmounting dev/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
I: removing directory /srv/workspace/pbuilder/2065933 and its subdirectories
I: Current time: Wed Jan 22 13:29:33 -12 2025
I: pbuilder-time-stamp: 1737595773
Thu Jan 23 01:29:35 UTC 2025 I: 1st build successful. Starting 2nd build on remote node codethink03-arm64.debian.net.
Thu Jan 23 01:29:35 UTC 2025 I: Preparing to do remote build '2' on codethink03-arm64.debian.net.
Thu Jan 23 01:30:17 UTC 2025 I: Deleting $TMPDIR on codethink03-arm64.debian.net.
Thu Jan 23 01:30:18 UTC 2025 I: libclass-default-perl_1.51-5_arm64.changes:
Format: 1.8
Date: Sat, 15 Oct 2022 17:45:34 +0100
Source: libclass-default-perl
Binary: libclass-default-perl
Architecture: all
Version: 1.51-5
Distribution: unstable
Urgency: medium
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Changed-By: Jelmer Vernooij <jelmer@debian.org>
Description:
libclass-default-perl - Perl module to make static calls apply to a default instantiation
Changes:
libclass-default-perl (1.51-5) unstable; urgency=medium
.
[ Debian Janitor ]
* Apply multi-arch hints. + libclass-default-perl: Add Multi-Arch: foreign.
Checksums-Sha1:
2e555502b61c17ba97ff954877b72078723863e4 10052 libclass-default-perl_1.51-5_all.deb
8730750bfb41880ed4b45800fe188b0c3a119b3a 4900 libclass-default-perl_1.51-5_arm64.buildinfo
Checksums-Sha256:
cc2daedc6822c170b260b0fefd89042e5afc3c139fd66d63a805d4e6506424d3 10052 libclass-default-perl_1.51-5_all.deb
1da84de7372f03f9eebd69c20144c2a39729ac11580f65f5900fce43939c65d2 4900 libclass-default-perl_1.51-5_arm64.buildinfo
Files:
efef34d078e5428bf9a99c36f9508436 10052 perl optional libclass-default-perl_1.51-5_all.deb
328ffa07a9c5c2421aa5cd5f16302b6f 4900 perl optional libclass-default-perl_1.51-5_arm64.buildinfo
Thu Jan 23 01:30:19 UTC 2025 I: diffoscope 285 will be used to compare the two builds:
Running as unit: rb-diffoscope-arm64_10-54768.service
# Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.JZqfsPUz/libclass-default-perl_1.51-5.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.JZqfsPUz/libclass-default-perl_1.51-5.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.JZqfsPUz/libclass-default-perl_1.51-5.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.JZqfsPUz/b1/libclass-default-perl_1.51-5_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.JZqfsPUz/b2/libclass-default-perl_1.51-5_arm64.changes
## command (total time: 0.000s)
0.000s 1 call cmp (internal)
## has_same_content_as (total time: 0.000s)
0.000s 1 call abc.DotChangesFile
## main (total time: 0.365s)
0.365s 2 calls outputs
0.000s 1 call cleanup
## recognizes (total time: 0.013s)
0.013s 12 calls diffoscope.comparators.binary.FilesystemFile
## specialize (total time: 0.000s)
0.000s 1 call specialize
Finished with result: success
Main processes terminated with: code=exited/status=0
Service runtime: 690ms
CPU time consumed: 691ms
Thu Jan 23 01:30:21 UTC 2025 I: diffoscope 285 found no differences in the changes files, and a .buildinfo file also exists.
Thu Jan 23 01:30:21 UTC 2025 I: libclass-default-perl from trixie built successfully and reproducibly on arm64.
Thu Jan 23 01:30:23 UTC 2025 I: Submitting .buildinfo files to external archives:
Thu Jan 23 01:30:23 UTC 2025 I: Submitting 8.0K b1/libclass-default-perl_1.51-5_arm64.buildinfo.asc
Thu Jan 23 01:30:24 UTC 2025 I: Submitting 8.0K b2/libclass-default-perl_1.51-5_arm64.buildinfo.asc
Thu Jan 23 01:30:26 UTC 2025 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit.
Thu Jan 23 01:30:26 UTC 2025 I: Done submitting .buildinfo files.
Thu Jan 23 01:30:26 UTC 2025 I: Removing signed libclass-default-perl_1.51-5_arm64.buildinfo.asc files:
removed './b1/libclass-default-perl_1.51-5_arm64.buildinfo.asc'
removed './b2/libclass-default-perl_1.51-5_arm64.buildinfo.asc'