Tue Jan 28 22:00:33 UTC 2025 I: starting to build distro-info/trixie/armhf on jenkins on '2025-01-28 22:00' Tue Jan 28 22:00:33 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_4/12549/console.log Tue Jan 28 22:00:33 UTC 2025 I: Downloading source for trixie/distro-info=1.13 --2025-01-28 22:00:34-- http://deb.debian.org/debian/pool/main/d/distro-info/distro-info_1.13.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1501 (1.5K) [text/prs.lines.tag] Saving to: ‘distro-info_1.13.dsc’ 0K . 100% 242M=0s 2025-01-28 22:00:34 (242 MB/s) - ‘distro-info_1.13.dsc’ saved [1501/1501] Tue Jan 28 22:00:34 UTC 2025 I: distro-info_1.13.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (native) Source: distro-info Binary: distro-info, libdistro-info-perl, python3-distro-info Architecture: any all Version: 1.13 Maintainer: Benjamin Drung Uploaders: Stefano Rivera Standards-Version: 4.7.0 Vcs-Browser: https://salsa.debian.org/debian/distro-info Vcs-Git: https://salsa.debian.org/debian/distro-info.git Testsuite: autopkgtest Testsuite-Triggers: mypy, pylint, python3-all, python3-flake8, python3-setuptools, python3-typeshed, shunit2 Build-Depends: debhelper-compat (= 13), dh-sequence-python3, distro-info-data (>= 0.59~) , mypy [!i386] , pylint (>= 3.3.0) , python3-all, python3-flake8 , python3-setuptools, python3-typeshed , shunit2 Package-List: distro-info deb devel optional arch=any libdistro-info-perl deb perl optional arch=all python3-distro-info deb python optional arch=all Checksums-Sha1: 77327e983acd57539b8c175c5fce40675cb7a347 34200 distro-info_1.13.tar.xz Checksums-Sha256: 36877429d91c29c15ace86db3a24ff6d9f6041d72b7ec11d4d3bd09abc763d33 34200 distro-info_1.13.tar.xz Files: e98f1a63bda4e58dd79e52d50615f3a9 34200 distro-info_1.13.tar.xz -----BEGIN PGP SIGNATURE----- iIoEARYKADIWIQTumtb5BSD6EfafSCRHew2wJjpU2AUCZ5GAWxQcc3RlZmFub3JA ZGViaWFuLm9yZwAKCRBHew2wJjpU2IYmAQC8KY0mAiqlYKtKVl0HcAvUKoHw975W dYo8kkAuyaQsZQEAkLOQ1XMChlUGFvNCLSd/4gnVn8d4b5MY6fBLpjaIeQQ= =+9uF -----END PGP SIGNATURE----- Tue Jan 28 22:00:34 UTC 2025 I: Checking whether the package is not for us Tue Jan 28 22:00:34 UTC 2025 I: Starting 1st build on remote node virt64z-armhf-rb.debian.net. Tue Jan 28 22:00:34 UTC 2025 I: Preparing to do remote build '1' on virt64z-armhf-rb.debian.net. Tue Jan 28 22:03:34 UTC 2025 I: Deleting $TMPDIR on virt64z-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Tue Jan 28 10:00:39 -12 2025 I: pbuilder-time-stamp: 1738101639 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [distro-info_1.13.dsc] I: copying [./distro-info_1.13.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./distro-info_1.13.dsc: unsupported subcommand dpkg-source: info: extracting distro-info in distro-info-1.13 dpkg-source: info: unpacking distro-info_1.13.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/6670/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='d20bb74e9f4e4ad4a7ce43d2b4495fb6' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='6670' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.Ztno24Ic/pbuilderrc_PdoV --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.Ztno24Ic/b1 --logfile b1/build.log distro-info_1.13.dsc' SUDO_GID='110' SUDO_UID='103' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux virt64z 6.1.0-30-arm64 #1 SMP Debian 6.1.124-1 (2025-01-12) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Nov 22 14:40 /bin -> usr/bin I: user script /srv/workspace/pbuilder/6670/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), dh-sequence-python3, distro-info-data (>= 0.59~), mypy, pylint (>= 3.3.0), python3-all, python3-flake8, python3-setuptools, python3-typeshed, shunit2 dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19568 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on dh-sequence-python3; however: Package dh-sequence-python3 is not installed. pbuilder-satisfydepends-dummy depends on distro-info-data (>= 0.59~); however: Package distro-info-data is not installed. pbuilder-satisfydepends-dummy depends on mypy; however: Package mypy is not installed. pbuilder-satisfydepends-dummy depends on pylint (>= 3.3.0); however: Package pylint is not installed. pbuilder-satisfydepends-dummy depends on python3-all; however: Package python3-all is not installed. pbuilder-satisfydepends-dummy depends on python3-flake8; however: Package python3-flake8 is not installed. pbuilder-satisfydepends-dummy depends on python3-setuptools; however: Package python3-setuptools is not installed. pbuilder-satisfydepends-dummy depends on python3-typeshed; however: Package python3-typeshed is not installed. pbuilder-satisfydepends-dummy depends on shunit2; however: Package shunit2 is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-python{a} dh-strip-nondeterminism{a} distro-info-data{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libcom-err2{a} libdebhelper-perl{a} libelf1t64{a} libexpat1{a} libffi8{a} libfile-stripnondeterminism-perl{a} libgssapi-krb5-2{a} libicu72{a} libk5crypto3{a} libkeyutils1{a} libkrb5-3{a} libkrb5support0{a} libmagic-mgc{a} libmagic1t64{a} libnsl2{a} libpipeline1{a} libpython3-stdlib{a} libpython3.12-minimal{a} libpython3.12-stdlib{a} libpython3.13-minimal{a} libpython3.13-stdlib{a} libreadline8t64{a} libtirpc-common{a} libtirpc3t64{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} media-types{a} mypy{a} netbase{a} po-debconf{a} pylint{a} python3{a} python3-all{a} python3-astroid{a} python3-autocommand{a} python3-dill{a} python3-flake8{a} python3-inflect{a} python3-isort{a} python3-jaraco.context{a} python3-jaraco.functools{a} python3-jaraco.text{a} python3-logilab-common{a} python3-mccabe{a} python3-minimal{a} python3-more-itertools{a} python3-mypy{a} python3-mypy-extensions{a} python3-pkg-resources{a} python3-platformdirs{a} python3-psutil{a} python3-pycodestyle{a} python3-pyflakes{a} python3-setuptools{a} python3-tomlkit{a} python3-typeguard{a} python3-typeshed{a} python3-typing-extensions{a} python3-zipp{a} python3.12{a} python3.12-minimal{a} python3.13{a} python3.13-minimal{a} readline-common{a} sensible-utils{a} shunit2{a} tzdata{a} The following packages are RECOMMENDED but will NOT be installed: ca-certificates curl krb5-locales libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx pyflakes3 python3-lxml python3-orjson python3-tk wget 0 packages upgraded, 88 newly installed, 0 to remove and 0 not upgraded. Need to get 49.7 MB of archives. After unpacking 203 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf libpython3.13-minimal armhf 3.13.1-3 [844 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf libexpat1 armhf 2.6.4-1 [83.5 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf python3.13-minimal armhf 3.13.1-3 [1840 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf python3-minimal armhf 3.13.1-2 [27.0 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf media-types all 10.1.0 [26.9 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf netbase all 6.4 [12.8 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf tzdata all 2024b-6 [257 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf libffi8 armhf 3.4.6-1 [20.0 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf readline-common all 8.2-6 [69.4 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf libreadline8t64 armhf 8.2-6 [146 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf libpython3.13-stdlib armhf 3.13.1-3 [1850 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf python3.13 armhf 3.13.1-3 [740 kB] Get: 13 http://deb.debian.org/debian trixie/main armhf libpython3-stdlib armhf 3.13.1-2 [9952 B] Get: 14 http://deb.debian.org/debian trixie/main armhf python3 armhf 3.13.1-2 [28.0 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf libpython3.12-minimal armhf 3.12.8-5 [803 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf python3.12-minimal armhf 3.12.8-5 [1812 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.24 [24.8 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-3+b1 [314 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf libmagic1t64 armhf 1:5.45-3+b1 [98.5 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-3+b1 [42.3 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.23.1-1 [238 kB] Get: 22 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b2 [65.6 kB] Get: 23 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-7 [1095 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.40.4-1 [84.6 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.8-1 [35.0 kB] Get: 26 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.13.0-1 [1382 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-5 [272 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf autoconf all 2.72-3 [493 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf automake all 1:1.16.5-1.3 [823 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf autopoint all 0.23.1-1 [770 kB] Get: 32 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.23 [90.6 kB] Get: 33 http://deb.debian.org/debian trixie/main armhf libtool all 2.5.4-2 [539 kB] Get: 34 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 35 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 36 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.14.1-1 [19.6 kB] Get: 37 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.14.1-1 [8584 B] Get: 38 http://deb.debian.org/debian trixie/main armhf libelf1t64 armhf 0.192-4 [184 kB] Get: 39 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1+b2 [106 kB] Get: 40 http://deb.debian.org/debian trixie/main armhf libunistring5 armhf 1.3-1 [444 kB] Get: 41 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-6 [9086 kB] Get: 42 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.12.7+dfsg+really2.9.14-0.2+b1 [605 kB] Get: 43 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.23.1-1 [1560 kB] Get: 44 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 45 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 46 http://deb.debian.org/debian trixie/main armhf debhelper all 13.23 [919 kB] Get: 47 http://deb.debian.org/debian trixie/main armhf python3-autocommand all 2.2.2-3 [13.6 kB] Get: 48 http://deb.debian.org/debian trixie/main armhf python3-more-itertools all 10.6.0-1 [65.3 kB] Get: 49 http://deb.debian.org/debian trixie/main armhf python3-typing-extensions all 4.12.2-2 [73.0 kB] Get: 50 http://deb.debian.org/debian trixie/main armhf python3-typeguard all 4.4.1-1 [37.0 kB] Get: 51 http://deb.debian.org/debian trixie/main armhf python3-inflect all 7.3.1-2 [32.4 kB] Get: 52 http://deb.debian.org/debian trixie/main armhf python3-jaraco.context all 6.0.0-1 [7984 B] Get: 53 http://deb.debian.org/debian trixie/main armhf python3-jaraco.functools all 4.1.0-1 [12.0 kB] Get: 54 http://deb.debian.org/debian trixie/main armhf python3-pkg-resources all 75.6.0-1 [222 kB] Get: 55 http://deb.debian.org/debian trixie/main armhf python3-jaraco.text all 4.0.0-1 [11.4 kB] Get: 56 http://deb.debian.org/debian trixie/main armhf python3-zipp all 3.21.0-1 [10.6 kB] Get: 57 http://deb.debian.org/debian trixie/main armhf python3-setuptools all 75.6.0-1 [720 kB] Get: 58 http://deb.debian.org/debian trixie/main armhf dh-python all 6.20250108 [113 kB] Get: 59 http://deb.debian.org/debian trixie/main armhf distro-info-data all 0.63 [6408 B] Get: 60 http://deb.debian.org/debian trixie/main armhf libcom-err2 armhf 1.47.2-1 [23.3 kB] Get: 61 http://deb.debian.org/debian trixie/main armhf libkrb5support0 armhf 1.21.3-4 [30.3 kB] Get: 62 http://deb.debian.org/debian trixie/main armhf libk5crypto3 armhf 1.21.3-4 [75.8 kB] Get: 63 http://deb.debian.org/debian trixie/main armhf libkeyutils1 armhf 1.6.3-4 [8096 B] Get: 64 http://deb.debian.org/debian trixie/main armhf libkrb5-3 armhf 1.21.3-4 [285 kB] Get: 65 http://deb.debian.org/debian trixie/main armhf libgssapi-krb5-2 armhf 1.21.3-4 [116 kB] Get: 66 http://deb.debian.org/debian trixie/main armhf libtirpc-common all 1.3.4+ds-1.3 [10.9 kB] Get: 67 http://deb.debian.org/debian trixie/main armhf libtirpc3t64 armhf 1.3.4+ds-1.3+b1 [71.3 kB] Get: 68 http://deb.debian.org/debian trixie/main armhf libnsl2 armhf 1.3.0-3+b3 [35.0 kB] Get: 69 http://deb.debian.org/debian trixie/main armhf libpython3.12-stdlib armhf 3.12.8-5 [1832 kB] Get: 70 http://deb.debian.org/debian trixie/main armhf python3-mypy-extensions all 1.0.0-1 [6064 B] Get: 71 http://deb.debian.org/debian trixie/main armhf python3-psutil armhf 5.9.8-2 [225 kB] Get: 72 http://deb.debian.org/debian trixie/main armhf python3-mypy armhf 1.13.0-2 [14.0 MB] Get: 73 http://deb.debian.org/debian trixie/main armhf mypy all 1.13.0-2 [67.2 kB] Get: 74 http://deb.debian.org/debian trixie/main armhf python3-astroid all 3.3.8-2 [213 kB] Get: 75 http://deb.debian.org/debian trixie/main armhf python3-isort all 5.13.2-2 [71.7 kB] Get: 76 http://deb.debian.org/debian trixie/main armhf python3-logilab-common all 2.0.0-3 [111 kB] Get: 77 http://deb.debian.org/debian trixie/main armhf python3-dill all 0.3.9-1 [83.5 kB] Get: 78 http://deb.debian.org/debian trixie/main armhf python3-mccabe all 0.7.0-1 [10.5 kB] Get: 79 http://deb.debian.org/debian trixie/main armhf python3-platformdirs all 4.3.6-1 [16.6 kB] Get: 80 http://deb.debian.org/debian trixie/main armhf python3-tomlkit all 0.13.2-1 [42.7 kB] Get: 81 http://deb.debian.org/debian trixie/main armhf pylint all 3.3.3-2 [340 kB] Get: 82 http://deb.debian.org/debian trixie/main armhf python3.12 armhf 3.12.8-5 [677 kB] Get: 83 http://deb.debian.org/debian trixie/main armhf python3-all armhf 3.13.1-2 [1056 B] Get: 84 http://deb.debian.org/debian trixie/main armhf python3-pycodestyle all 2.12.1-2 [39.7 kB] Get: 85 http://deb.debian.org/debian trixie/main armhf python3-pyflakes all 3.2.0-3 [57.3 kB] Get: 86 http://deb.debian.org/debian trixie/main armhf python3-flake8 all 7.1.1-3 [56.3 kB] Get: 87 http://deb.debian.org/debian trixie/main armhf python3-typeshed all 0.0~git20241223.ea91db2-1 [1530 kB] Get: 88 http://deb.debian.org/debian trixie/main armhf shunit2 all 2.1.8-4 [33.9 kB] Fetched 49.7 MB in 13s (3775 kB/s) Preconfiguring packages ... Selecting previously unselected package libpython3.13-minimal:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19568 files and directories currently installed.) Preparing to unpack .../libpython3.13-minimal_3.13.1-3_armhf.deb ... Unpacking libpython3.13-minimal:armhf (3.13.1-3) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../libexpat1_2.6.4-1_armhf.deb ... Unpacking libexpat1:armhf (2.6.4-1) ... Selecting previously unselected package python3.13-minimal. Preparing to unpack .../python3.13-minimal_3.13.1-3_armhf.deb ... Unpacking python3.13-minimal (3.13.1-3) ... Setting up libpython3.13-minimal:armhf (3.13.1-3) ... Setting up libexpat1:armhf (2.6.4-1) ... Setting up python3.13-minimal (3.13.1-3) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19902 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.13.1-2_armhf.deb ... Unpacking python3-minimal (3.13.1-2) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../2-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../3-tzdata_2024b-6_all.deb ... Unpacking tzdata (2024b-6) ... Selecting previously unselected package libffi8:armhf. Preparing to unpack .../4-libffi8_3.4.6-1_armhf.deb ... Unpacking libffi8:armhf (3.4.6-1) ... Selecting previously unselected package readline-common. Preparing to unpack .../5-readline-common_8.2-6_all.deb ... Unpacking readline-common (8.2-6) ... Selecting previously unselected package libreadline8t64:armhf. Preparing to unpack .../6-libreadline8t64_8.2-6_armhf.deb ... Adding 'diversion of /lib/arm-linux-gnueabihf/libhistory.so.8 to /lib/arm-linux-gnueabihf/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libhistory.so.8.2 to /lib/arm-linux-gnueabihf/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libreadline.so.8 to /lib/arm-linux-gnueabihf/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libreadline.so.8.2 to /lib/arm-linux-gnueabihf/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:armhf (8.2-6) ... Selecting previously unselected package libpython3.13-stdlib:armhf. Preparing to unpack .../7-libpython3.13-stdlib_3.13.1-3_armhf.deb ... Unpacking libpython3.13-stdlib:armhf (3.13.1-3) ... Selecting previously unselected package python3.13. Preparing to unpack .../8-python3.13_3.13.1-3_armhf.deb ... Unpacking python3.13 (3.13.1-3) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../9-libpython3-stdlib_3.13.1-2_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.13.1-2) ... Setting up python3-minimal (3.13.1-2) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20912 files and directories currently installed.) Preparing to unpack .../00-python3_3.13.1-2_armhf.deb ... Unpacking python3 (3.13.1-2) ... Selecting previously unselected package libpython3.12-minimal:armhf. Preparing to unpack .../01-libpython3.12-minimal_3.12.8-5_armhf.deb ... Unpacking libpython3.12-minimal:armhf (3.12.8-5) ... Selecting previously unselected package python3.12-minimal. Preparing to unpack .../02-python3.12-minimal_3.12.8-5_armhf.deb ... Unpacking python3.12-minimal (3.12.8-5) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../03-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../04-libmagic-mgc_1%3a5.45-3+b1_armhf.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:armhf. Preparing to unpack .../05-libmagic1t64_1%3a5.45-3+b1_armhf.deb ... Unpacking libmagic1t64:armhf (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../06-file_1%3a5.45-3+b1_armhf.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../07-gettext-base_0.23.1-1_armhf.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../08-libuchardet0_0.0.8-1+b2_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../09-groff-base_1.23.0-7_armhf.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../10-bsdextrautils_2.40.4-1_armhf.deb ... Unpacking bsdextrautils (2.40.4-1) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../11-libpipeline1_1.5.8-1_armhf.deb ... Unpacking libpipeline1:armhf (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../12-man-db_2.13.0-1_armhf.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../13-m4_1.4.19-5_armhf.deb ... Unpacking m4 (1.4.19-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../14-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../15-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../16-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../17-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../18-libdebhelper-perl_13.23_all.deb ... Unpacking libdebhelper-perl (13.23) ... Selecting previously unselected package libtool. Preparing to unpack .../19-libtool_2.5.4-2_all.deb ... Unpacking libtool (2.5.4-2) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../20-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../21-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../22-libfile-stripnondeterminism-perl_1.14.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../23-dh-strip-nondeterminism_1.14.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-1) ... Selecting previously unselected package libelf1t64:armhf. Preparing to unpack .../24-libelf1t64_0.192-4_armhf.deb ... Unpacking libelf1t64:armhf (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../25-dwz_0.15-1+b2_armhf.deb ... Unpacking dwz (0.15-1+b2) ... Selecting previously unselected package libunistring5:armhf. Preparing to unpack .../26-libunistring5_1.3-1_armhf.deb ... Unpacking libunistring5:armhf (1.3-1) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../27-libicu72_72.1-6_armhf.deb ... Unpacking libicu72:armhf (72.1-6) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../28-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_armhf.deb ... Unpacking libxml2:armhf (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.23.1-1_armhf.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_13.23_all.deb ... Unpacking debhelper (13.23) ... Selecting previously unselected package python3-autocommand. Preparing to unpack .../33-python3-autocommand_2.2.2-3_all.deb ... Unpacking python3-autocommand (2.2.2-3) ... Selecting previously unselected package python3-more-itertools. Preparing to unpack .../34-python3-more-itertools_10.6.0-1_all.deb ... Unpacking python3-more-itertools (10.6.0-1) ... Selecting previously unselected package python3-typing-extensions. Preparing to unpack .../35-python3-typing-extensions_4.12.2-2_all.deb ... Unpacking python3-typing-extensions (4.12.2-2) ... Selecting previously unselected package python3-typeguard. Preparing to unpack .../36-python3-typeguard_4.4.1-1_all.deb ... Unpacking python3-typeguard (4.4.1-1) ... Selecting previously unselected package python3-inflect. Preparing to unpack .../37-python3-inflect_7.3.1-2_all.deb ... Unpacking python3-inflect (7.3.1-2) ... Selecting previously unselected package python3-jaraco.context. Preparing to unpack .../38-python3-jaraco.context_6.0.0-1_all.deb ... Unpacking python3-jaraco.context (6.0.0-1) ... Selecting previously unselected package python3-jaraco.functools. Preparing to unpack .../39-python3-jaraco.functools_4.1.0-1_all.deb ... Unpacking python3-jaraco.functools (4.1.0-1) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../40-python3-pkg-resources_75.6.0-1_all.deb ... Unpacking python3-pkg-resources (75.6.0-1) ... Selecting previously unselected package python3-jaraco.text. Preparing to unpack .../41-python3-jaraco.text_4.0.0-1_all.deb ... Unpacking python3-jaraco.text (4.0.0-1) ... Selecting previously unselected package python3-zipp. Preparing to unpack .../42-python3-zipp_3.21.0-1_all.deb ... Unpacking python3-zipp (3.21.0-1) ... Selecting previously unselected package python3-setuptools. Preparing to unpack .../43-python3-setuptools_75.6.0-1_all.deb ... Unpacking python3-setuptools (75.6.0-1) ... Selecting previously unselected package dh-python. Preparing to unpack .../44-dh-python_6.20250108_all.deb ... Unpacking dh-python (6.20250108) ... Selecting previously unselected package distro-info-data. Preparing to unpack .../45-distro-info-data_0.63_all.deb ... Unpacking distro-info-data (0.63) ... Selecting previously unselected package libcom-err2:armhf. Preparing to unpack .../46-libcom-err2_1.47.2-1_armhf.deb ... Unpacking libcom-err2:armhf (1.47.2-1) ... Selecting previously unselected package libkrb5support0:armhf. Preparing to unpack .../47-libkrb5support0_1.21.3-4_armhf.deb ... Unpacking libkrb5support0:armhf (1.21.3-4) ... Selecting previously unselected package libk5crypto3:armhf. Preparing to unpack .../48-libk5crypto3_1.21.3-4_armhf.deb ... Unpacking libk5crypto3:armhf (1.21.3-4) ... Selecting previously unselected package libkeyutils1:armhf. Preparing to unpack .../49-libkeyutils1_1.6.3-4_armhf.deb ... Unpacking libkeyutils1:armhf (1.6.3-4) ... Selecting previously unselected package libkrb5-3:armhf. Preparing to unpack .../50-libkrb5-3_1.21.3-4_armhf.deb ... Unpacking libkrb5-3:armhf (1.21.3-4) ... Selecting previously unselected package libgssapi-krb5-2:armhf. Preparing to unpack .../51-libgssapi-krb5-2_1.21.3-4_armhf.deb ... Unpacking libgssapi-krb5-2:armhf (1.21.3-4) ... Selecting previously unselected package libtirpc-common. Preparing to unpack .../52-libtirpc-common_1.3.4+ds-1.3_all.deb ... Unpacking libtirpc-common (1.3.4+ds-1.3) ... Selecting previously unselected package libtirpc3t64:armhf. Preparing to unpack .../53-libtirpc3t64_1.3.4+ds-1.3+b1_armhf.deb ... Adding 'diversion of /lib/arm-linux-gnueabihf/libtirpc.so.3 to /lib/arm-linux-gnueabihf/libtirpc.so.3.usr-is-merged by libtirpc3t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libtirpc.so.3.0.0 to /lib/arm-linux-gnueabihf/libtirpc.so.3.0.0.usr-is-merged by libtirpc3t64' Unpacking libtirpc3t64:armhf (1.3.4+ds-1.3+b1) ... Selecting previously unselected package libnsl2:armhf. Preparing to unpack .../54-libnsl2_1.3.0-3+b3_armhf.deb ... Unpacking libnsl2:armhf (1.3.0-3+b3) ... Selecting previously unselected package libpython3.12-stdlib:armhf. Preparing to unpack .../55-libpython3.12-stdlib_3.12.8-5_armhf.deb ... Unpacking libpython3.12-stdlib:armhf (3.12.8-5) ... Selecting previously unselected package python3-mypy-extensions. Preparing to unpack .../56-python3-mypy-extensions_1.0.0-1_all.deb ... Unpacking python3-mypy-extensions (1.0.0-1) ... Selecting previously unselected package python3-psutil. Preparing to unpack .../57-python3-psutil_5.9.8-2_armhf.deb ... Unpacking python3-psutil (5.9.8-2) ... Selecting previously unselected package python3-mypy. Preparing to unpack .../58-python3-mypy_1.13.0-2_armhf.deb ... Unpacking python3-mypy (1.13.0-2) ... Selecting previously unselected package mypy. Preparing to unpack .../59-mypy_1.13.0-2_all.deb ... Unpacking mypy (1.13.0-2) ... Selecting previously unselected package python3-astroid. Preparing to unpack .../60-python3-astroid_3.3.8-2_all.deb ... Unpacking python3-astroid (3.3.8-2) ... Selecting previously unselected package python3-isort. Preparing to unpack .../61-python3-isort_5.13.2-2_all.deb ... Unpacking python3-isort (5.13.2-2) ... Selecting previously unselected package python3-logilab-common. Preparing to unpack .../62-python3-logilab-common_2.0.0-3_all.deb ... Unpacking python3-logilab-common (2.0.0-3) ... Selecting previously unselected package python3-dill. Preparing to unpack .../63-python3-dill_0.3.9-1_all.deb ... Unpacking python3-dill (0.3.9-1) ... Selecting previously unselected package python3-mccabe. Preparing to unpack .../64-python3-mccabe_0.7.0-1_all.deb ... Unpacking python3-mccabe (0.7.0-1) ... Selecting previously unselected package python3-platformdirs. Preparing to unpack .../65-python3-platformdirs_4.3.6-1_all.deb ... Unpacking python3-platformdirs (4.3.6-1) ... Selecting previously unselected package python3-tomlkit. Preparing to unpack .../66-python3-tomlkit_0.13.2-1_all.deb ... Unpacking python3-tomlkit (0.13.2-1) ... Selecting previously unselected package pylint. Preparing to unpack .../67-pylint_3.3.3-2_all.deb ... Unpacking pylint (3.3.3-2) ... Selecting previously unselected package python3.12. Preparing to unpack .../68-python3.12_3.12.8-5_armhf.deb ... Unpacking python3.12 (3.12.8-5) ... Selecting previously unselected package python3-all. Preparing to unpack .../69-python3-all_3.13.1-2_armhf.deb ... Unpacking python3-all (3.13.1-2) ... Selecting previously unselected package python3-pycodestyle. Preparing to unpack .../70-python3-pycodestyle_2.12.1-2_all.deb ... Unpacking python3-pycodestyle (2.12.1-2) ... Selecting previously unselected package python3-pyflakes. Preparing to unpack .../71-python3-pyflakes_3.2.0-3_all.deb ... Unpacking python3-pyflakes (3.2.0-3) ... Selecting previously unselected package python3-flake8. Preparing to unpack .../72-python3-flake8_7.1.1-3_all.deb ... Unpacking python3-flake8 (7.1.1-3) ... Selecting previously unselected package python3-typeshed. Preparing to unpack .../73-python3-typeshed_0.0~git20241223.ea91db2-1_all.deb ... Unpacking python3-typeshed (0.0~git20241223.ea91db2-1) ... Selecting previously unselected package shunit2. Preparing to unpack .../74-shunit2_2.1.8-4_all.deb ... Unpacking shunit2 (2.1.8-4) ... Setting up media-types (10.1.0) ... Setting up libpipeline1:armhf (1.5.8-1) ... Setting up libkeyutils1:armhf (1.6.3-4) ... Setting up libicu72:armhf (72.1-6) ... Setting up bsdextrautils (2.40.4-1) ... Setting up shunit2 (2.1.8-4) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up distro-info-data (0.63) ... Setting up libtirpc-common (1.3.4+ds-1.3) ... Setting up libdebhelper-perl (13.23) ... Setting up libmagic1t64:armhf (1:5.45-3+b1) ... Setting up libpython3.12-minimal:armhf (3.12.8-5) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-5) ... Setting up libcom-err2:armhf (1.47.2-1) ... Setting up file (1:5.45-3+b1) ... Setting up libelf1t64:armhf (0.192-4) ... Setting up libkrb5support0:armhf (1.21.3-4) ... Setting up tzdata (2024b-6) ... Current default time zone: 'Etc/UTC' Local time is now: Tue Jan 28 22:01:52 UTC 2025. Universal Time is now: Tue Jan 28 22:01:52 UTC 2025. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up autotools-dev (20220109.1) ... Setting up libunistring5:armhf (1.3-1) ... Setting up autopoint (0.23.1-1) ... Setting up libk5crypto3:armhf (1.21.3-4) ... Setting up autoconf (2.72-3) ... Setting up libffi8:armhf (3.4.6-1) ... Setting up dwz (0.15-1+b2) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:armhf (0.0.8-1+b2) ... Setting up netbase (6.4) ... Setting up libkrb5-3:armhf (1.21.3-4) ... Setting up readline-common (8.2-6) ... Setting up libxml2:armhf (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-1) ... Setting up python3.12-minimal (3.12.8-5) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libgssapi-krb5-2:armhf (1.21.3-4) ... Setting up libreadline8t64:armhf (8.2-6) ... Setting up dh-strip-nondeterminism (1.14.1-1) ... Setting up groff-base (1.23.0-7) ... Setting up libpython3.13-stdlib:armhf (3.13.1-3) ... Setting up libpython3-stdlib:armhf (3.13.1-2) ... Setting up libtirpc3t64:armhf (1.3.4+ds-1.3+b1) ... Setting up python3.13 (3.13.1-3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up python3 (3.13.1-2) ... Setting up python3-zipp (3.21.0-1) ... Setting up python3-autocommand (2.2.2-3) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up python3-platformdirs (4.3.6-1) ... Setting up python3-psutil (5.9.8-2) ... Setting up python3-pycodestyle (2.12.1-2) ... Setting up python3-typeshed (0.0~git20241223.ea91db2-1) ... Setting up python3-dill (0.3.9-1) ... Setting up python3-typing-extensions (4.12.2-2) ... Setting up python3-isort (5.13.2-2) ... Setting up python3-astroid (3.3.8-2) ... Setting up libnsl2:armhf (1.3.0-3+b3) ... Setting up python3-mccabe (0.7.0-1) ... Setting up python3-tomlkit (0.13.2-1) ... Setting up python3-more-itertools (10.6.0-1) ... Setting up python3-jaraco.functools (4.1.0-1) ... Setting up libpython3.12-stdlib:armhf (3.12.8-5) ... Setting up python3-jaraco.context (6.0.0-1) ... Setting up python3-mypy-extensions (1.0.0-1) ... Setting up python3.12 (3.12.8-5) ... Setting up python3-pyflakes (3.2.0-3) ... Setting up python3-typeguard (4.4.1-1) ... Setting up python3-all (3.13.1-2) ... Setting up debhelper (13.23) ... Setting up python3-flake8 (7.1.1-3) ... Setting up python3-inflect (7.3.1-2) ... Setting up python3-jaraco.text (4.0.0-1) ... Setting up python3-mypy (1.13.0-2) ... Setting up mypy (1.13.0-2) ... Setting up python3-pkg-resources (75.6.0-1) ... Setting up python3-setuptools (75.6.0-1) ... Setting up python3-logilab-common (2.0.0-3) ... Setting up pylint (3.3.3-2) ... Setting up dh-python (6.20250108) ... Processing triggers for libc-bin (2.40-6) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/distro-info-1.13/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../distro-info_1.13_source.changes dpkg-buildpackage: info: source package distro-info dpkg-buildpackage: info: source version 1.13 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Stefano Rivera dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean dh_auto_clean make -j3 clean make[1]: Entering directory '/build/reproducible-path/distro-info-1.13' rm -rf debian-distro-info ubuntu-distro-info python/build python/*.egg-info python/.pylint.d find python -name '*.pyc' -delete make[1]: Leaving directory '/build/reproducible-path/distro-info-1.13' dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure dh_auto_build make -j3 "INSTALL=install --strip-program=true" make[1]: Entering directory '/build/reproducible-path/distro-info-1.13' cc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/distro-info-1.13=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wall -Wextra -g -O2 -std=gnu99 -Wl,-z,relro -Wl,-z,now -o debian-distro-info debian-distro-info.c cc -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/distro-info-1.13=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -Wall -Wextra -g -O2 -std=gnu99 -Wl,-z,relro -Wl,-z,now -o ubuntu-distro-info ubuntu-distro-info.c make[1]: Leaving directory '/build/reproducible-path/distro-info-1.13' dh_auto_test make -j3 test make[1]: Entering directory '/build/reproducible-path/distro-info-1.13' ./test-debian-distro-info cd perl && ./test.pl testAlias testAll testDevel testOldstable testStable testSupported testLTS 1..35 ok 1 - unique: Matching lists ok 2 - symmetric_difference: Matching lists ok 3 - unique: 1 Unique Item ok 4 - unique: 1 Unique Item in the haystack ok 5 - symmetric_difference: 1 Unique Item ok 6 - Debian all ok 7 - Debian devel ok 8 - Debian oldstable ok 9 - Debian stable ok 10 - Debian testing ok 11 - Debian valid ok 12 - Debian valid ok 13 - Debian invalid ok 14 - Debian supported ok 15 - Debian LTS ok 16 - Debian ELTS ok 17 - Debian unsupported ok 18 - Debian codename, invalid ok 19 - Debian codename ok 20 - Debian version, invalid ok 21 - Debian version ok 22 - Ubuntu all ok 23 - Ubuntu version ok 24 - Ubuntu LTS version ok 25 - Ubuntu devel ok 26 - Ubuntu LTS ok 27 - Ubuntu stable ok 28 - Ubuntu valid ok 29 - Ubuntu invalid ok 30 - Ubuntu is_lts ok 31 - Ubuntu !is_lts ok 32 - Ubuntu !is_lts ok 33 - Ubuntu supported ok 34 - Ubuntu ESM ok 35 - Ubuntu unsupported testELTS testUnsupported testTesting testFullname testRelease py3versions: no X-Python3-Version in control file, using supported versions testSeries cd python && python3.12 -m unittest discover testCombinedShortform testReleaseDate testHelp testExactlyOne testUnrecognizedOption testUnrecognizedArguments testMissingArgumentAlias testMissingArgumentDate testMissingArgumentSeries testInvalidAlias testInvalidDate testInvalidSeries testMultipleAlias testMultipleDates testMultipleSeries testUnknownSeries testSourceDateEpoch testDays ............................... Ran 31 tests. OK ./test-ubuntu-distro-info testAll testDevel testLatest testLTS testStable testSupported testUnsupported testFullname testRelease testSeries testCombinedShortform testReleaseDate testHelp testExactlyOne testUnrecognizedOption testUnrecognizedArguments testMissingArgumentDate testMissingArgumentSeries testDistributionDataOutdated testInvalidDate testInvalidSeries testMultipleDates testMultipleSeries testUnknownSeries testSourceDateEpoch testDays Ran 26 tests. OK .......... ---------------------------------------------------------------------- Ran 41 tests in 18.540s OK cd python && python3.13 -m unittest discover ......................................... ---------------------------------------------------------------------- Ran 41 tests in 10.225s OK make[1]: Leaving directory '/build/reproducible-path/distro-info-1.13' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install make -j3 install DESTDIR=/build/reproducible-path/distro-info-1.13/debian/tmp AM_UPDATE_INFO_DIR=no "INSTALL=install --strip-program=true" make[1]: Entering directory '/build/reproducible-path/distro-info-1.13' install -d /build/reproducible-path/distro-info-1.13/debian/tmp/usr/bin install -m 755 debian-distro-info ubuntu-distro-info /build/reproducible-path/distro-info-1.13/debian/tmp/usr/bin ln -s debian-distro-info /build/reproducible-path/distro-info-1.13/debian/tmp/usr/bin/distro-info install -d /build/reproducible-path/distro-info-1.13/debian/tmp/usr/share/man/man1 install -m 644 doc/debian-distro-info.1 doc/distro-info.1 doc/ubuntu-distro-info.1 /build/reproducible-path/distro-info-1.13/debian/tmp/usr/share/man/man1 install -d /build/reproducible-path/distro-info-1.13/debian/tmp/usr/share/perl5/Debian install -m 644 perl/Debian/DistroInfo.pm /build/reproducible-path/distro-info-1.13/debian/tmp/usr/share/perl5/Debian cd python && python3 setup.py install --root="/build/reproducible-path/distro-info-1.13/debian/tmp" --no-compile --install-layout=deb running install /usr/lib/python3/dist-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer or other standards-based tools. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. ******************************************************************************** !! self.initialize_options() running build running build_py creating build/lib copying distro_info.py -> build/lib creating build/lib/distro_info copying distro_info/py.typed -> build/lib/distro_info running install_lib creating /build/reproducible-path/distro-info-1.13/debian/tmp/usr/lib/python3/dist-packages copying build/lib/distro_info.py -> /build/reproducible-path/distro-info-1.13/debian/tmp/usr/lib/python3/dist-packages creating /build/reproducible-path/distro-info-1.13/debian/tmp/usr/lib/python3/dist-packages/distro_info copying build/lib/distro_info/py.typed -> /build/reproducible-path/distro-info-1.13/debian/tmp/usr/lib/python3/dist-packages/distro_info running install_egg_info running egg_info creating distro_info.egg-info writing distro_info.egg-info/PKG-INFO writing dependency_links to distro_info.egg-info/dependency_links.txt writing top-level names to distro_info.egg-info/top_level.txt writing manifest file 'distro_info.egg-info/SOURCES.txt' reading manifest file 'distro_info.egg-info/SOURCES.txt' writing manifest file 'distro_info.egg-info/SOURCES.txt' Copying distro_info.egg-info to /build/reproducible-path/distro-info-1.13/debian/tmp/usr/lib/python3/dist-packages/distro_info-1.13.egg-info Skipping SOURCES.txt running install_scripts make[1]: Leaving directory '/build/reproducible-path/distro-info-1.13' dh_install dh_installdocs dh_installchangelogs dh_installman dh_python3 dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-armhf.so.3 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-armhf.so.3.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'distro-info' in '../distro-info_1.13_armhf.deb'. dpkg-deb: building package 'libdistro-info-perl' in '../libdistro-info-perl_1.13_all.deb'. dpkg-deb: building package 'python3-distro-info' in '../python3-distro-info_1.13_all.deb'. dpkg-deb: building package 'distro-info-dbgsym' in '../distro-info-dbgsym_1.13_armhf.deb'. dpkg-genbuildinfo --build=binary -O../distro-info_1.13_armhf.buildinfo dpkg-genchanges --build=binary -O../distro-info_1.13_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/6670 and its subdirectories I: Current time: Tue Jan 28 10:03:29 -12 2025 I: pbuilder-time-stamp: 1738101809 Tue Jan 28 22:03:36 UTC 2025 I: 1st build successful. Starting 2nd build on remote node ff4a-armhf-rb.debian.net. Tue Jan 28 22:03:36 UTC 2025 I: Preparing to do remote build '2' on ff4a-armhf-rb.debian.net. Tue Jan 28 22:08:16 UTC 2025 I: Deleting $TMPDIR on ff4a-armhf-rb.debian.net. Tue Jan 28 22:08:19 UTC 2025 I: distro-info_1.13_armhf.changes: Format: 1.8 Date: Wed, 22 Jan 2025 19:33:12 -0400 Source: distro-info Binary: distro-info distro-info-dbgsym libdistro-info-perl python3-distro-info Architecture: armhf all Version: 1.13 Distribution: unstable Urgency: medium Maintainer: Benjamin Drung Changed-By: Stefano Rivera Description: distro-info - provides information about the distributions' releases libdistro-info-perl - information about distributions' releases (Perl module) python3-distro-info - information about distributions' releases (Python 3 module) Changes: distro-info (1.13) unstable; urgency=medium . [ Michael R. Crusoe ] * autopkgtests: the unittests need setuptools installed. . [ Stefano Rivera ] * Bump copyright years. Checksums-Sha1: 07ee660acede4110f7221eb033be4c8f8ce1077b 37944 distro-info-dbgsym_1.13_armhf.deb 20bc7a305336230454c0bcc172f315a36536425c 7221 distro-info_1.13_armhf.buildinfo 258dc9b55247601c382d1ecca1b5a289c6093d86 18292 distro-info_1.13_armhf.deb 2b705ae3430d1c955b012a952ec9c0369420feb9 5800 libdistro-info-perl_1.13_all.deb 3dcb2466cbcaf34357079a5f7957464027de5514 7736 python3-distro-info_1.13_all.deb Checksums-Sha256: 39cceb6400ba20a5b8a7e3751eb85de8396a2d6df7c5e7272f1a0679066c0a2a 37944 distro-info-dbgsym_1.13_armhf.deb 65567a7e7821b96ede3108d0df56aa6e1d013754d94e2999347cf5286503fa9d 7221 distro-info_1.13_armhf.buildinfo 8ddde95d078299f15666b69d78c25657530657f1b53eb3eb95c8b917aac983ea 18292 distro-info_1.13_armhf.deb a268fbab2ea7380575f3d4e86e4d1d7bca101ec04466cba3e9b556d3c28fe384 5800 libdistro-info-perl_1.13_all.deb 11848888a90676314dd977fd2788e2d1f11f5e471d879313b8158a28488dc062 7736 python3-distro-info_1.13_all.deb Files: 1c6cb5ffae6f2a1d29966a51f3302839 37944 debug optional distro-info-dbgsym_1.13_armhf.deb c6571991728cd28218ec8dbcaa6156e6 7221 devel optional distro-info_1.13_armhf.buildinfo b22781af77e14c8646be7fe587ab58fb 18292 devel optional distro-info_1.13_armhf.deb b07bb27f2ecb0c3ce71fbf96d744053c 5800 perl optional libdistro-info-perl_1.13_all.deb 910cabaa3dfee1808df56876d57a6d7e 7736 python optional python3-distro-info_1.13_all.deb Tue Jan 28 22:08:20 UTC 2025 I: diffoscope 286 will be used to compare the two builds: Running as unit: rb-diffoscope-armhf_4-12549.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.Ztno24Ic/distro-info_1.13.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.Ztno24Ic/distro-info_1.13.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.Ztno24Ic/distro-info_1.13.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.Ztno24Ic/b1/distro-info_1.13_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.Ztno24Ic/b2/distro-info_1.13_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call diffoscope.comparators.binary.FilesystemFile ## main (total time: 0.003s) 0.003s 2 calls outputs 0.000s 1 call cleanup Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 225ms CPU time consumed: 224ms Tue Jan 28 22:08:20 UTC 2025 I: diffoscope 286 found no differences in the changes files, and a .buildinfo file also exists. Tue Jan 28 22:08:20 UTC 2025 I: distro-info from trixie built successfully and reproducibly on armhf. Tue Jan 28 22:08:21 UTC 2025 I: Submitting .buildinfo files to external archives: Tue Jan 28 22:08:21 UTC 2025 I: Submitting 8.0K b1/distro-info_1.13_armhf.buildinfo.asc Tue Jan 28 22:08:23 UTC 2025 I: Submitting 8.0K b2/distro-info_1.13_armhf.buildinfo.asc Tue Jan 28 22:08:24 UTC 2025 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Tue Jan 28 22:08:24 UTC 2025 I: Done submitting .buildinfo files. Tue Jan 28 22:08:24 UTC 2025 I: Removing signed distro-info_1.13_armhf.buildinfo.asc files: removed './b1/distro-info_1.13_armhf.buildinfo.asc' removed './b2/distro-info_1.13_armhf.buildinfo.asc'