Mon Feb 24 19:39:52 UTC 2025 I: starting to build qcom-phone-utils/trixie/armhf on jenkins on '2025-02-24 19:39' Mon Feb 24 19:39:52 UTC 2025 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/armhf_7/8085/console.log Mon Feb 24 19:39:52 UTC 2025 I: Downloading source for trixie/qcom-phone-utils=0.4.0 --2025-02-24 19:39:53-- http://deb.debian.org/debian/pool/main/q/qcom-phone-utils/qcom-phone-utils_0.4.0.dsc Connecting to 46.16.76.132:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 1849 (1.8K) [text/prs.lines.tag] Saving to: ‘qcom-phone-utils_0.4.0.dsc’ 0K . 100% 328M=0s 2025-02-24 19:39:53 (328 MB/s) - ‘qcom-phone-utils_0.4.0.dsc’ saved [1849/1849] Mon Feb 24 19:39:53 UTC 2025 I: qcom-phone-utils_0.4.0.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (native) Source: qcom-phone-utils Binary: qcom-phone-utils Architecture: any Version: 0.4.0 Maintainer: DebianOnMobile Maintainers Uploaders: Arnaud Ferraris Homepage: https://salsa.debian.org/DebianOnMobile-team/qcom-phone-utils Standards-Version: 4.7.0 Vcs-Browser: https://salsa.debian.org/DebianOnMobile-team/qcom-phone-utils Vcs-Git: https://salsa.debian.org/DebianOnMobile-team/qcom-phone-utils.git Build-Depends: debhelper-compat (= 13), libasound-dev, libdbus-1-dev, meson, pkgconf, systemd-dev, shellcheck Package-List: qcom-phone-utils deb misc optional arch=any Checksums-Sha1: 3b78c1311bbe1b350f360d4990ef174a5085ddb3 27492 qcom-phone-utils_0.4.0.tar.xz Checksums-Sha256: 59b280c44e3dfc6c8e0984ac3907bbfc8ec5d4d45a5d1ca8a9bf68b16ccb2f8f 27492 qcom-phone-utils_0.4.0.tar.xz Files: 3059e3f814f0fba55972a5e075b7b44f 27492 qcom-phone-utils_0.4.0.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEeW2zk9w/9AIituoi0+u1lmu5kZYFAmeop5kACgkQ0+u1lmu5 kZZpKhAAlkAWVP+wZocq8ZNke1fJ5kk3NrvxkcYS2Oh4AJlK1Mk5/jLYiYon+HFm lsvfI6vNSqQIeK0dMtO/RwLAJYZ0Jjz3MZy5Yj6RcoAygHShyTXMgkcVzWz3FgyK eLBOc7TpocbVT5iXEbN5kmyoeihd/fbLjDezlnH01XOjPtnvMZcjg78HQTyZuYXv 1ZoosrHeXZ33MwPJyzmOWqrn7OiZ4pqQZ7seplBH5lZlD/wafLGPhoRnphz6pAvF firkVX+rH7f/Uer8FWavtVatCa/GbmHsjCsCq1r3X5G0qZx85ueodsuVwGJecDqy JXoqJxVBAj7QasobM6E4b8AIIiyjQ10/Y9hfkJXfKtXmvspbOdysWq6q2cVZuKi5 CSRzJ4wNkIGAGwfQ+FEPpWH2nkUKCjCXZLRMqLK1cXk3plH9Nnoy+lFhRos/NoX/ +ALYd/fbBzNlkcvf+iH7TRSjy+4LSlx3DhyArTruTgblnz+FkLYEHeDBk5wpjIV3 JGjrI6OG0PSO+SeysfTAA9qDsJJzxukWYY4mMYNF8zv6T36RTVXPcK5rm7JgeFo6 J/IrX3rF01LeUi0tgFUkMQeJ2hUxgH5KzOMr2dFG+hWWhj7PTfM3jjbXgIe5uyje Ne4YSR1Fuw6pbbCLYQFzY9HZ1O6myVUgu6jFwaZji0pXALGbbAM= =1GYm -----END PGP SIGNATURE----- Mon Feb 24 19:39:53 UTC 2025 I: Checking whether the package is not for us Mon Feb 24 19:39:53 UTC 2025 I: Starting 1st build on remote node virt64b-armhf-rb.debian.net. Mon Feb 24 19:39:53 UTC 2025 I: Preparing to do remote build '1' on virt64b-armhf-rb.debian.net. Mon Feb 24 19:41:23 UTC 2025 I: Deleting $TMPDIR on virt64b-armhf-rb.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Mon Feb 24 07:39:59 -12 2025 I: pbuilder-time-stamp: 1740425999 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/trixie-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [qcom-phone-utils_0.4.0.dsc] I: copying [./qcom-phone-utils_0.4.0.tar.xz] I: Extracting source dpkg-source: warning: cannot verify inline signature for ./qcom-phone-utils_0.4.0.dsc: unsupported subcommand dpkg-source: info: extracting qcom-phone-utils in qcom-phone-utils-0.4.0 dpkg-source: info: unpacking qcom-phone-utils_0.4.0.tar.xz I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/18300/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build/reproducible-path' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='armhf' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=3 ' DISTRIBUTION='trixie' HOME='/root' HOST_ARCH='armhf' IFS=' ' INVOCATION_ID='2e5ac7559c1c41f2a1afe449ba19978d' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='18300' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.DMakXqU0/pbuilderrc_XATZ --distribution trixie --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/trixie-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.DMakXqU0/b1 --logfile b1/build.log qcom-phone-utils_0.4.0.dsc' SUDO_GID='113' SUDO_UID='107' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://10.0.0.15:3142/' I: uname -a Linux virt64b 6.1.0-31-arm64 #1 SMP Debian 6.1.128-1 (2025-02-07) aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 Nov 22 14:40 /bin -> usr/bin I: user script /srv/workspace/pbuilder/18300/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 13), libasound-dev, libdbus-1-dev, meson, pkgconf, systemd-dev, shellcheck dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19527 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 13); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libasound-dev; however: Package libasound-dev is not installed. pbuilder-satisfydepends-dummy depends on libdbus-1-dev; however: Package libdbus-1-dev is not installed. pbuilder-satisfydepends-dummy depends on meson; however: Package meson is not installed. pbuilder-satisfydepends-dummy depends on pkgconf; however: Package pkgconf is not installed. pbuilder-satisfydepends-dummy depends on systemd-dev; however: Package systemd-dev is not installed. pbuilder-satisfydepends-dummy depends on shellcheck; however: Package shellcheck is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libasound2-data{a} libasound2-dev{a} libasound2t64{a} libcap-dev{a} libdbus-1-3{a} libdbus-1-dev{a} libdebhelper-perl{a} libelf1t64{a} libexpat1{a} libffi8{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1t64{a} libpipeline1{a} libpkgconf3{a} libpython3-stdlib{a} libpython3.13-minimal{a} libpython3.13-stdlib{a} libreadline8t64{a} libsystemd-dev{a} libtool{a} libuchardet0{a} libunistring5{a} libxml2{a} m4{a} man-db{a} media-types{a} meson{a} netbase{a} ninja-build{a} pkgconf{a} pkgconf-bin{a} po-debconf{a} python3{a} python3-autocommand{a} python3-inflect{a} python3-jaraco.context{a} python3-jaraco.functools{a} python3-jaraco.text{a} python3-minimal{a} python3-more-itertools{a} python3-pkg-resources{a} python3-setuptools{a} python3-typeguard{a} python3-typing-extensions{a} python3-zipp{a} python3.13{a} python3.13-minimal{a} readline-common{a} sensible-utils{a} sgml-base{a} shellcheck{a} systemd-dev{a} tzdata{a} xml-core{a} The following packages are RECOMMENDED but will NOT be installed: alsa-topology-conf alsa-ucm-conf ca-certificates curl dbus libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget 0 packages upgraded, 71 newly installed, 0 to remove and 0 not upgraded. Need to get 36.8 MB of archives. After unpacking 161 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian trixie/main armhf libpython3.13-minimal armhf 3.13.2-1 [845 kB] Get: 2 http://deb.debian.org/debian trixie/main armhf libexpat1 armhf 2.6.4-1 [83.5 kB] Get: 3 http://deb.debian.org/debian trixie/main armhf python3.13-minimal armhf 3.13.2-1 [1842 kB] Get: 4 http://deb.debian.org/debian trixie/main armhf python3-minimal armhf 3.13.1-2 [27.0 kB] Get: 5 http://deb.debian.org/debian trixie/main armhf media-types all 10.1.0 [26.9 kB] Get: 6 http://deb.debian.org/debian trixie/main armhf netbase all 6.4 [12.8 kB] Get: 7 http://deb.debian.org/debian trixie/main armhf tzdata all 2025a-2 [259 kB] Get: 8 http://deb.debian.org/debian trixie/main armhf libffi8 armhf 3.4.7-1 [20.3 kB] Get: 9 http://deb.debian.org/debian trixie/main armhf readline-common all 8.2-6 [69.4 kB] Get: 10 http://deb.debian.org/debian trixie/main armhf libreadline8t64 armhf 8.2-6 [146 kB] Get: 11 http://deb.debian.org/debian trixie/main armhf libpython3.13-stdlib armhf 3.13.2-1 [1853 kB] Get: 12 http://deb.debian.org/debian trixie/main armhf python3.13 armhf 3.13.2-1 [745 kB] Get: 13 http://deb.debian.org/debian trixie/main armhf libpython3-stdlib armhf 3.13.1-2 [9952 B] Get: 14 http://deb.debian.org/debian trixie/main armhf python3 armhf 3.13.1-2 [28.0 kB] Get: 15 http://deb.debian.org/debian trixie/main armhf sgml-base all 1.31 [15.4 kB] Get: 16 http://deb.debian.org/debian trixie/main armhf sensible-utils all 0.0.24 [24.8 kB] Get: 17 http://deb.debian.org/debian trixie/main armhf libmagic-mgc armhf 1:5.45-3+b1 [314 kB] Get: 18 http://deb.debian.org/debian trixie/main armhf libmagic1t64 armhf 1:5.45-3+b1 [98.5 kB] Get: 19 http://deb.debian.org/debian trixie/main armhf file armhf 1:5.45-3+b1 [42.3 kB] Get: 20 http://deb.debian.org/debian trixie/main armhf gettext-base armhf 0.23.1-1 [238 kB] Get: 21 http://deb.debian.org/debian trixie/main armhf libuchardet0 armhf 0.0.8-1+b2 [65.6 kB] Get: 22 http://deb.debian.org/debian trixie/main armhf groff-base armhf 1.23.0-7 [1095 kB] Get: 23 http://deb.debian.org/debian trixie/main armhf bsdextrautils armhf 2.40.4-4 [84.8 kB] Get: 24 http://deb.debian.org/debian trixie/main armhf libpipeline1 armhf 1.5.8-1 [35.0 kB] Get: 25 http://deb.debian.org/debian trixie/main armhf man-db armhf 2.13.0-1 [1382 kB] Get: 26 http://deb.debian.org/debian trixie/main armhf m4 armhf 1.4.19-5 [272 kB] Get: 27 http://deb.debian.org/debian trixie/main armhf autoconf all 2.72-3 [493 kB] Get: 28 http://deb.debian.org/debian trixie/main armhf autotools-dev all 20220109.1 [51.6 kB] Get: 29 http://deb.debian.org/debian trixie/main armhf automake all 1:1.17-3 [862 kB] Get: 30 http://deb.debian.org/debian trixie/main armhf autopoint all 0.23.1-1 [770 kB] Get: 31 http://deb.debian.org/debian trixie/main armhf libdebhelper-perl all 13.24.1 [90.9 kB] Get: 32 http://deb.debian.org/debian trixie/main armhf libtool all 2.5.4-3 [539 kB] Get: 33 http://deb.debian.org/debian trixie/main armhf dh-autoreconf all 20 [17.1 kB] Get: 34 http://deb.debian.org/debian trixie/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 35 http://deb.debian.org/debian trixie/main armhf libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get: 36 http://deb.debian.org/debian trixie/main armhf dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get: 37 http://deb.debian.org/debian trixie/main armhf libelf1t64 armhf 0.192-4 [184 kB] Get: 38 http://deb.debian.org/debian trixie/main armhf dwz armhf 0.15-1+b2 [106 kB] Get: 39 http://deb.debian.org/debian trixie/main armhf libunistring5 armhf 1.3-1 [444 kB] Get: 40 http://deb.debian.org/debian trixie/main armhf libicu72 armhf 72.1-6 [9086 kB] Get: 41 http://deb.debian.org/debian trixie/main armhf libxml2 armhf 2.12.7+dfsg+really2.9.14-0.2+b1 [605 kB] Get: 42 http://deb.debian.org/debian trixie/main armhf gettext armhf 0.23.1-1 [1560 kB] Get: 43 http://deb.debian.org/debian trixie/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 44 http://deb.debian.org/debian trixie/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 45 http://deb.debian.org/debian trixie/main armhf debhelper all 13.24.1 [920 kB] Get: 46 http://deb.debian.org/debian trixie/main armhf libasound2-data all 1.2.13-1 [21.1 kB] Get: 47 http://deb.debian.org/debian trixie/main armhf libasound2t64 armhf 1.2.13-1+b1 [320 kB] Get: 48 http://deb.debian.org/debian trixie/main armhf libasound2-dev armhf 1.2.13-1+b1 [120 kB] Get: 49 http://deb.debian.org/debian trixie/main armhf libcap-dev armhf 1:2.66-5+b1 [398 kB] Get: 50 http://deb.debian.org/debian trixie/main armhf libdbus-1-3 armhf 1.16.0-1 [154 kB] Get: 51 http://deb.debian.org/debian trixie/main armhf libsystemd-dev armhf 257.3-1 [1294 kB] Get: 52 http://deb.debian.org/debian trixie/main armhf libpkgconf3 armhf 1.8.1-4 [31.8 kB] Get: 53 http://deb.debian.org/debian trixie/main armhf pkgconf-bin armhf 1.8.1-4 [29.2 kB] Get: 54 http://deb.debian.org/debian trixie/main armhf pkgconf armhf 1.8.1-4 [26.1 kB] Get: 55 http://deb.debian.org/debian trixie/main armhf xml-core all 0.19 [20.1 kB] Get: 56 http://deb.debian.org/debian trixie/main armhf libdbus-1-dev armhf 1.16.0-1 [194 kB] Get: 57 http://deb.debian.org/debian trixie/main armhf ninja-build armhf 1.12.1-1 [125 kB] Get: 58 http://deb.debian.org/debian trixie/main armhf python3-autocommand all 2.2.2-3 [13.6 kB] Get: 59 http://deb.debian.org/debian trixie/main armhf python3-more-itertools all 10.6.0-1 [65.3 kB] Get: 60 http://deb.debian.org/debian trixie/main armhf python3-typing-extensions all 4.12.2-2 [73.0 kB] Get: 61 http://deb.debian.org/debian trixie/main armhf python3-typeguard all 4.4.1-1 [37.0 kB] Get: 62 http://deb.debian.org/debian trixie/main armhf python3-inflect all 7.3.1-2 [32.4 kB] Get: 63 http://deb.debian.org/debian trixie/main armhf python3-jaraco.context all 6.0.0-1 [7984 B] Get: 64 http://deb.debian.org/debian trixie/main armhf python3-jaraco.functools all 4.1.0-1 [12.0 kB] Get: 65 http://deb.debian.org/debian trixie/main armhf python3-pkg-resources all 75.8.0-1 [222 kB] Get: 66 http://deb.debian.org/debian trixie/main armhf python3-jaraco.text all 4.0.0-1 [11.4 kB] Get: 67 http://deb.debian.org/debian trixie/main armhf python3-zipp all 3.21.0-1 [10.6 kB] Get: 68 http://deb.debian.org/debian trixie/main armhf python3-setuptools all 75.8.0-1 [724 kB] Get: 69 http://deb.debian.org/debian trixie/main armhf meson all 1.7.0-1 [639 kB] Get: 70 http://deb.debian.org/debian trixie/main armhf shellcheck armhf 0.10.0-1 [6339 kB] Get: 71 http://deb.debian.org/debian trixie/main armhf systemd-dev all 257.3-1 [71.3 kB] Fetched 36.8 MB in 1s (44.1 MB/s) Preconfiguring packages ... Selecting previously unselected package libpython3.13-minimal:armhf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19527 files and directories currently installed.) Preparing to unpack .../libpython3.13-minimal_3.13.2-1_armhf.deb ... Unpacking libpython3.13-minimal:armhf (3.13.2-1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../libexpat1_2.6.4-1_armhf.deb ... Unpacking libexpat1:armhf (2.6.4-1) ... Selecting previously unselected package python3.13-minimal. Preparing to unpack .../python3.13-minimal_3.13.2-1_armhf.deb ... Unpacking python3.13-minimal (3.13.2-1) ... Setting up libpython3.13-minimal:armhf (3.13.2-1) ... Setting up libexpat1:armhf (2.6.4-1) ... Setting up python3.13-minimal (3.13.2-1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19861 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.13.1-2_armhf.deb ... Unpacking python3-minimal (3.13.1-2) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_10.1.0_all.deb ... Unpacking media-types (10.1.0) ... Selecting previously unselected package netbase. Preparing to unpack .../2-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package tzdata. Preparing to unpack .../3-tzdata_2025a-2_all.deb ... Unpacking tzdata (2025a-2) ... Selecting previously unselected package libffi8:armhf. Preparing to unpack .../4-libffi8_3.4.7-1_armhf.deb ... Unpacking libffi8:armhf (3.4.7-1) ... Selecting previously unselected package readline-common. Preparing to unpack .../5-readline-common_8.2-6_all.deb ... Unpacking readline-common (8.2-6) ... Selecting previously unselected package libreadline8t64:armhf. Preparing to unpack .../6-libreadline8t64_8.2-6_armhf.deb ... Adding 'diversion of /lib/arm-linux-gnueabihf/libhistory.so.8 to /lib/arm-linux-gnueabihf/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libhistory.so.8.2 to /lib/arm-linux-gnueabihf/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libreadline.so.8 to /lib/arm-linux-gnueabihf/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libreadline.so.8.2 to /lib/arm-linux-gnueabihf/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:armhf (8.2-6) ... Selecting previously unselected package libpython3.13-stdlib:armhf. Preparing to unpack .../7-libpython3.13-stdlib_3.13.2-1_armhf.deb ... Unpacking libpython3.13-stdlib:armhf (3.13.2-1) ... Selecting previously unselected package python3.13. Preparing to unpack .../8-python3.13_3.13.2-1_armhf.deb ... Unpacking python3.13 (3.13.2-1) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../9-libpython3-stdlib_3.13.1-2_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.13.1-2) ... Setting up python3-minimal (3.13.1-2) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20871 files and directories currently installed.) Preparing to unpack .../00-python3_3.13.1-2_armhf.deb ... Unpacking python3 (3.13.1-2) ... Selecting previously unselected package sgml-base. Preparing to unpack .../01-sgml-base_1.31_all.deb ... Unpacking sgml-base (1.31) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../02-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../03-libmagic-mgc_1%3a5.45-3+b1_armhf.deb ... Unpacking libmagic-mgc (1:5.45-3+b1) ... Selecting previously unselected package libmagic1t64:armhf. Preparing to unpack .../04-libmagic1t64_1%3a5.45-3+b1_armhf.deb ... Unpacking libmagic1t64:armhf (1:5.45-3+b1) ... Selecting previously unselected package file. Preparing to unpack .../05-file_1%3a5.45-3+b1_armhf.deb ... Unpacking file (1:5.45-3+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../06-gettext-base_0.23.1-1_armhf.deb ... Unpacking gettext-base (0.23.1-1) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../07-libuchardet0_0.0.8-1+b2_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../08-groff-base_1.23.0-7_armhf.deb ... Unpacking groff-base (1.23.0-7) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../09-bsdextrautils_2.40.4-4_armhf.deb ... Unpacking bsdextrautils (2.40.4-4) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../10-libpipeline1_1.5.8-1_armhf.deb ... Unpacking libpipeline1:armhf (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../11-man-db_2.13.0-1_armhf.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.19-5_armhf.deb ... Unpacking m4 (1.4.19-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.17-3_all.deb ... Unpacking automake (1:1.17-3) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.23.1-1_all.deb ... Unpacking autopoint (0.23.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../17-libdebhelper-perl_13.24.1_all.deb ... Unpacking libdebhelper-perl (13.24.1) ... Selecting previously unselected package libtool. Preparing to unpack .../18-libtool_2.5.4-3_all.deb ... Unpacking libtool (2.5.4-3) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../19-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../20-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../21-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../22-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:armhf. Preparing to unpack .../23-libelf1t64_0.192-4_armhf.deb ... Unpacking libelf1t64:armhf (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../24-dwz_0.15-1+b2_armhf.deb ... Unpacking dwz (0.15-1+b2) ... Selecting previously unselected package libunistring5:armhf. Preparing to unpack .../25-libunistring5_1.3-1_armhf.deb ... Unpacking libunistring5:armhf (1.3-1) ... Selecting previously unselected package libicu72:armhf. Preparing to unpack .../26-libicu72_72.1-6_armhf.deb ... Unpacking libicu72:armhf (72.1-6) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../27-libxml2_2.12.7+dfsg+really2.9.14-0.2+b1_armhf.deb ... Unpacking libxml2:armhf (2.12.7+dfsg+really2.9.14-0.2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../28-gettext_0.23.1-1_armhf.deb ... Unpacking gettext (0.23.1-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../29-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../30-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../31-debhelper_13.24.1_all.deb ... Unpacking debhelper (13.24.1) ... Selecting previously unselected package libasound2-data. Preparing to unpack .../32-libasound2-data_1.2.13-1_all.deb ... Unpacking libasound2-data (1.2.13-1) ... Selecting previously unselected package libasound2t64:armhf. Preparing to unpack .../33-libasound2t64_1.2.13-1+b1_armhf.deb ... Unpacking libasound2t64:armhf (1.2.13-1+b1) ... Selecting previously unselected package libasound2-dev:armhf. Preparing to unpack .../34-libasound2-dev_1.2.13-1+b1_armhf.deb ... Unpacking libasound2-dev:armhf (1.2.13-1+b1) ... Selecting previously unselected package libcap-dev:armhf. Preparing to unpack .../35-libcap-dev_1%3a2.66-5+b1_armhf.deb ... Unpacking libcap-dev:armhf (1:2.66-5+b1) ... Selecting previously unselected package libdbus-1-3:armhf. Preparing to unpack .../36-libdbus-1-3_1.16.0-1_armhf.deb ... Unpacking libdbus-1-3:armhf (1.16.0-1) ... Selecting previously unselected package libsystemd-dev:armhf. Preparing to unpack .../37-libsystemd-dev_257.3-1_armhf.deb ... Unpacking libsystemd-dev:armhf (257.3-1) ... Selecting previously unselected package libpkgconf3:armhf. Preparing to unpack .../38-libpkgconf3_1.8.1-4_armhf.deb ... Unpacking libpkgconf3:armhf (1.8.1-4) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../39-pkgconf-bin_1.8.1-4_armhf.deb ... Unpacking pkgconf-bin (1.8.1-4) ... Selecting previously unselected package pkgconf:armhf. Preparing to unpack .../40-pkgconf_1.8.1-4_armhf.deb ... Unpacking pkgconf:armhf (1.8.1-4) ... Selecting previously unselected package xml-core. Preparing to unpack .../41-xml-core_0.19_all.deb ... Unpacking xml-core (0.19) ... Selecting previously unselected package libdbus-1-dev:armhf. Preparing to unpack .../42-libdbus-1-dev_1.16.0-1_armhf.deb ... Unpacking libdbus-1-dev:armhf (1.16.0-1) ... Selecting previously unselected package ninja-build. Preparing to unpack .../43-ninja-build_1.12.1-1_armhf.deb ... Unpacking ninja-build (1.12.1-1) ... Selecting previously unselected package python3-autocommand. Preparing to unpack .../44-python3-autocommand_2.2.2-3_all.deb ... Unpacking python3-autocommand (2.2.2-3) ... Selecting previously unselected package python3-more-itertools. Preparing to unpack .../45-python3-more-itertools_10.6.0-1_all.deb ... Unpacking python3-more-itertools (10.6.0-1) ... Selecting previously unselected package python3-typing-extensions. Preparing to unpack .../46-python3-typing-extensions_4.12.2-2_all.deb ... Unpacking python3-typing-extensions (4.12.2-2) ... Selecting previously unselected package python3-typeguard. Preparing to unpack .../47-python3-typeguard_4.4.1-1_all.deb ... Unpacking python3-typeguard (4.4.1-1) ... Selecting previously unselected package python3-inflect. Preparing to unpack .../48-python3-inflect_7.3.1-2_all.deb ... Unpacking python3-inflect (7.3.1-2) ... Selecting previously unselected package python3-jaraco.context. Preparing to unpack .../49-python3-jaraco.context_6.0.0-1_all.deb ... Unpacking python3-jaraco.context (6.0.0-1) ... Selecting previously unselected package python3-jaraco.functools. Preparing to unpack .../50-python3-jaraco.functools_4.1.0-1_all.deb ... Unpacking python3-jaraco.functools (4.1.0-1) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../51-python3-pkg-resources_75.8.0-1_all.deb ... Unpacking python3-pkg-resources (75.8.0-1) ... Selecting previously unselected package python3-jaraco.text. Preparing to unpack .../52-python3-jaraco.text_4.0.0-1_all.deb ... Unpacking python3-jaraco.text (4.0.0-1) ... Selecting previously unselected package python3-zipp. Preparing to unpack .../53-python3-zipp_3.21.0-1_all.deb ... Unpacking python3-zipp (3.21.0-1) ... Selecting previously unselected package python3-setuptools. Preparing to unpack .../54-python3-setuptools_75.8.0-1_all.deb ... Unpacking python3-setuptools (75.8.0-1) ... Selecting previously unselected package meson. Preparing to unpack .../55-meson_1.7.0-1_all.deb ... Unpacking meson (1.7.0-1) ... Selecting previously unselected package shellcheck. Preparing to unpack .../56-shellcheck_0.10.0-1_armhf.deb ... Unpacking shellcheck (0.10.0-1) ... Selecting previously unselected package systemd-dev. Preparing to unpack .../57-systemd-dev_257.3-1_all.deb ... Unpacking systemd-dev (257.3-1) ... Setting up media-types (10.1.0) ... Setting up libpipeline1:armhf (1.5.8-1) ... Setting up libicu72:armhf (72.1-6) ... Setting up bsdextrautils (2.40.4-4) ... Setting up libmagic-mgc (1:5.45-3+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.1) ... Setting up libmagic1t64:armhf (1:5.45-3+b1) ... Setting up gettext-base (0.23.1-1) ... Setting up m4 (1.4.19-5) ... Setting up systemd-dev (257.3-1) ... Setting up file (1:5.45-3+b1) ... Setting up ninja-build (1.12.1-1) ... Setting up libelf1t64:armhf (0.192-4) ... Setting up tzdata (2025a-2) ... Current default time zone: 'Etc/UTC' Local time is now: Mon Feb 24 19:40:43 UTC 2025. Universal Time is now: Mon Feb 24 19:40:43 UTC 2025. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up libasound2-data (1.2.13-1) ... Setting up autotools-dev (20220109.1) ... Setting up libpkgconf3:armhf (1.8.1-4) ... Setting up libasound2t64:armhf (1.2.13-1+b1) ... Setting up libdbus-1-3:armhf (1.16.0-1) ... Setting up libunistring5:armhf (1.3-1) ... Setting up autopoint (0.23.1-1) ... Setting up pkgconf-bin (1.8.1-4) ... Setting up autoconf (2.72-3) ... Setting up libffi8:armhf (3.4.7-1) ... Setting up dwz (0.15-1+b2) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:armhf (0.0.8-1+b2) ... Setting up netbase (6.4) ... Setting up sgml-base (1.31) ... Setting up libasound2-dev:armhf (1.2.13-1+b1) ... Setting up libcap-dev:armhf (1:2.66-5+b1) ... Setting up readline-common (8.2-6) ... Setting up libxml2:armhf (2.12.7+dfsg+really2.9.14-0.2+b1) ... Setting up libsystemd-dev:armhf (257.3-1) ... Setting up automake (1:1.17-3) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-1) ... Setting up libtool (2.5.4-3) ... Setting up shellcheck (0.10.0-1) ... Setting up pkgconf:armhf (1.8.1-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libreadline8t64:armhf (8.2-6) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-7) ... Setting up xml-core (0.19) ... Setting up libpython3.13-stdlib:armhf (3.13.2-1) ... Setting up libpython3-stdlib:armhf (3.13.1-2) ... Setting up python3.13 (3.13.2-1) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up python3 (3.13.1-2) ... Setting up python3-zipp (3.21.0-1) ... Setting up python3-autocommand (2.2.2-3) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up python3-typing-extensions (4.12.2-2) ... Setting up python3-more-itertools (10.6.0-1) ... Setting up python3-jaraco.functools (4.1.0-1) ... Setting up python3-jaraco.context (6.0.0-1) ... Setting up python3-typeguard (4.4.1-1) ... Setting up debhelper (13.24.1) ... Setting up python3-inflect (7.3.1-2) ... Setting up python3-jaraco.text (4.0.0-1) ... Setting up python3-pkg-resources (75.8.0-1) ... Setting up python3-setuptools (75.8.0-1) ... Setting up meson (1.7.0-1) ... Processing triggers for libc-bin (2.40-7) ... Processing triggers for sgml-base (1.31) ... Setting up libdbus-1-dev:armhf (1.16.0-1) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps I: Building the package I: Running cd /build/reproducible-path/qcom-phone-utils-0.4.0/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../qcom-phone-utils_0.4.0_source.changes dpkg-buildpackage: info: source package qcom-phone-utils dpkg-buildpackage: info: source version 0.4.0 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Arnaud Ferraris dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf debian/rules override_dh_auto_configure make[1]: Entering directory '/build/reproducible-path/qcom-phone-utils-0.4.0' dh_auto_configure -- -Dtests=true cd obj-arm-linux-gnueabihf && DEB_PYTHON_INSTALL_LAYOUT=deb LC_ALL=C.UTF-8 meson setup .. --wrap-mode=nodownload --buildtype=plain --prefix=/usr --sysconfdir=/etc --localstatedir=/var --libdir=lib/arm-linux-gnueabihf -Dpython.bytecompile=-1 -Dtests=true The Meson build system Version: 1.7.0 Source dir: /build/reproducible-path/qcom-phone-utils-0.4.0 Build dir: /build/reproducible-path/qcom-phone-utils-0.4.0/obj-arm-linux-gnueabihf Build type: native build Project name: qcom-phone-utils Project version: undefined C compiler for the host machine: cc (gcc 14.2.0 "cc (Debian 14.2.0-16) 14.2.0") C linker for the host machine: cc ld.bfd 2.44 Host machine cpu family: arm Host machine cpu: arm Program shellcheck found: YES (/usr/bin/shellcheck) Executing subproject bootmac bootmac| Project name: bootmac bootmac| Project version: undefined bootmac| C compiler for the host machine: cc (gcc 14.2.0 "cc (Debian 14.2.0-16) 14.2.0") bootmac| C linker for the host machine: cc ld.bfd 2.44 bootmac| Found pkg-config: YES (/usr/bin/pkg-config) 1.8.1 bootmac| Run-time dependency systemd found: YES 257 bootmac| Run-time dependency udev found: YES 257 bootmac| Build targets in project: 0 bootmac| Subproject bootmac finished. Executing subproject q6voiced q6voiced| Project name: q6voiced q6voiced| Project version: undefined q6voiced| C compiler for the host machine: cc (gcc 14.2.0 "cc (Debian 14.2.0-16) 14.2.0") q6voiced| C linker for the host machine: cc ld.bfd 2.44 q6voiced| Run-time dependency dbus-1 found: YES 1.16.0 q6voiced| Run-time dependency alsa found: YES 1.2.13 q6voiced| Build targets in project: 1 q6voiced| Subproject q6voiced finished. Build targets in project: 1 qcom-phone-utils undefined Subprojects bootmac : YES q6voiced : YES User defined options buildtype : plain libdir : lib/arm-linux-gnueabihf localstatedir : /var prefix : /usr python.bytecompile: -1 sysconfdir : /etc tests : true wrap_mode : nodownload Found ninja-1.12.1 at /usr/bin/ninja make[1]: Leaving directory '/build/reproducible-path/qcom-phone-utils-0.4.0' dh_auto_build cd obj-arm-linux-gnueabihf && LC_ALL=C.UTF-8 ninja -j3 -v [1/2] cc -Isubprojects/q6voiced/q6voiced.p -Isubprojects/q6voiced -I../subprojects/q6voiced -I/usr/include/dbus-1.0 -I/usr/lib/arm-linux-gnueabihf/dbus-1.0/include -fdiagnostics-color=always -Wall -Winvalid-pch -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/qcom-phone-utils-0.4.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -MD -MQ subprojects/q6voiced/q6voiced.p/q6voiced.c.o -MF subprojects/q6voiced/q6voiced.p/q6voiced.c.o.d -o subprojects/q6voiced/q6voiced.p/q6voiced.c.o -c ../subprojects/q6voiced/q6voiced.c ../subprojects/q6voiced/q6voiced.c: In function ‘main’: ../subprojects/q6voiced/q6voiced.c:171:24: warning: suggest parentheses around assignment used as truth value [-Wparentheses] 171 | while (msg = dbus_connection_pop_message(conn)) { | ^~~ [2/2] cc -o subprojects/q6voiced/q6voiced subprojects/q6voiced/q6voiced.p/q6voiced.c.o -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/reproducible-path/qcom-phone-utils-0.4.0=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -Wl,--start-group /usr/lib/arm-linux-gnueabihf/libdbus-1.so /usr/lib/arm-linux-gnueabihf/libasound.so -Wl,--end-group dh_auto_test cd obj-arm-linux-gnueabihf && DEB_PYTHON_INSTALL_LAYOUT=deb LC_ALL=C.UTF-8 MESON_TESTTHREADS=3 meson test --verbose ninja: Entering directory `/build/reproducible-path/qcom-phone-utils-0.4.0/obj-arm-linux-gnueabihf' ninja: no work to do. 1/1 lint shell scripts RUNNING >>> MALLOC_PERTURB_=152 MSAN_OPTIONS=halt_on_error=1:abort_on_error=1:print_summary=1:print_stacktrace=1 UBSAN_OPTIONS=halt_on_error=1:abort_on_error=1:print_summary=1:print_stacktrace=1 MESON_TEST_ITERATION=1 ASAN_OPTIONS=halt_on_error=1:abort_on_error=1:print_summary=1 /usr/bin/shellcheck /build/reproducible-path/qcom-phone-utils-0.4.0/obj-arm-linux-gnueabihf/../scripts/q6voiced /build/reproducible-path/qcom-phone-utils-0.4.0/obj-arm-linux-gnueabihf/../scripts/qcom-modem-setup /build/reproducible-path/qcom-phone-utils-0.4.0/obj-arm-linux-gnueabihf/../scripts/zz-qcom-bootimg ――――――――――――――――――――――――――――――――――――― ✀ ――――――――――――――――――――――――――――――――――――― ―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――― 1/1 lint shell scripts OK 0.39s Ok: 1 Expected Fail: 0 Fail: 0 Unexpected Pass: 0 Skipped: 0 Timeout: 0 Full log written to /build/reproducible-path/qcom-phone-utils-0.4.0/obj-arm-linux-gnueabihf/meson-logs/testlog.txt create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/qcom-phone-utils/ cd obj-arm-linux-gnueabihf && DESTDIR=/build/reproducible-path/qcom-phone-utils-0.4.0/debian/qcom-phone-utils LC_ALL=C.UTF-8 ninja install [0/1] Installing files Installing subprojects/q6voiced/q6voiced to /build/reproducible-path/qcom-phone-utils-0.4.0/debian/qcom-phone-utils/usr/libexec Installing /build/reproducible-path/qcom-phone-utils-0.4.0/subprojects/bootmac/bootmac-bluetooth.rules to /build/reproducible-path/qcom-phone-utils-0.4.0/debian/qcom-phone-utils/usr/lib/udev/rules.d Installing /build/reproducible-path/qcom-phone-utils-0.4.0/subprojects/bootmac/bootmac-wifi.rules to /build/reproducible-path/qcom-phone-utils-0.4.0/debian/qcom-phone-utils/usr/lib/udev/rules.d Installing /build/reproducible-path/qcom-phone-utils-0.4.0/subprojects/bootmac/bootmac-bluetooth.service to /build/reproducible-path/qcom-phone-utils-0.4.0/debian/qcom-phone-utils/usr/lib/systemd/system Installing /build/reproducible-path/qcom-phone-utils-0.4.0/subprojects/bootmac/bootmac to /build/reproducible-path/qcom-phone-utils-0.4.0/debian/qcom-phone-utils/usr/bin dh_install dh_installdocs dh_installchangelogs debian/rules override_dh_installsystemd make[1]: Entering directory '/build/reproducible-path/qcom-phone-utils-0.4.0' dh_installsystemd --name q6voiced --no-start --no-stop-on-upgrade --no-restart-after-upgrade dh_installsystemd --name qcom-modem-setup --no-start --no-stop-on-upgrade --no-restart-after-upgrade dh_installsystemd --name bootmac-bluetooth --no-start --no-stop-on-upgrade --no-restart-after-upgrade make[1]: Leaving directory '/build/reproducible-path/qcom-phone-utils-0.4.0' dh_installinitramfs dh_lintian dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib/ld-linux-armhf.so.3 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib/ld-linux-armhf.so.3.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'qcom-phone-utils' in '../qcom-phone-utils_0.4.0_armhf.deb'. dpkg-deb: building package 'qcom-phone-utils-dbgsym' in '../qcom-phone-utils-dbgsym_0.4.0_armhf.deb'. dpkg-genbuildinfo --build=binary -O../qcom-phone-utils_0.4.0_armhf.buildinfo dpkg-genchanges --build=binary -O../qcom-phone-utils_0.4.0_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: including full source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/18300 and its subdirectories I: Current time: Mon Feb 24 07:41:19 -12 2025 I: pbuilder-time-stamp: 1740426079 Mon Feb 24 19:41:26 UTC 2025 I: 1st build successful. Starting 2nd build on remote node cbxi4a-armhf-rb.debian.net. Mon Feb 24 19:41:26 UTC 2025 I: Preparing to do remote build '2' on cbxi4a-armhf-rb.debian.net. Mon Feb 24 19:45:10 UTC 2025 I: Deleting $TMPDIR on cbxi4a-armhf-rb.debian.net. Mon Feb 24 19:45:13 UTC 2025 I: qcom-phone-utils_0.4.0_armhf.changes: Format: 1.8 Date: Wed, 05 Feb 2025 13:03:38 +0100 Source: qcom-phone-utils Binary: qcom-phone-utils qcom-phone-utils-dbgsym Architecture: armhf Version: 0.4.0 Distribution: unstable Urgency: medium Maintainer: DebianOnMobile Maintainers Changed-By: Arnaud Ferraris Description: qcom-phone-utils - Utilities for Qualcomm-based phones running Linux Changes: qcom-phone-utils (0.4.0) unstable; urgency=medium . [ Shubham Vishwakarma ] * add nothing phone (1) firmware paths according to mainline kernel . [ Arnaud Ferraris ] * zz-qcom-bootimg: improve current slot detection. The method used so far for slot detection has a major flaw: it fails to determine the current slot when the same bootimg has been flashed to both slots. Now that we have a usable `qbootctl` in Debian, use it to make this detection more reliable. * Import `bootmac` and `q6voiced` as Meson subprojects. Those are both maintained in separate repos upstream, but do not warrant being packaged on their own in Debian. In order to integrate those utils into `qcom-phone-utils`, while still making upgrades and maintenance realtively easy, we can simply import those as Meson subprojects. This requires the following changes: * drop current copies of bootmac and associated systemd service and udev rules * add a "patch" (according to Meson's definition) `meson.build` file to `bootmac` so it can be "built" using `meson` as well * update `d/copyright` and `d/rules` accordingly * create a top-level `meson.build` so debhelper can identify the build system and process the subprojects automatically * add the newly-needed build dependencies and make `qcom-phone-utils` an `Architecture: any` package as it now ships a compiled executable * Re-organize repo layout. As we're starting to have lots of different files in there, let's use clearly labelled subfolders. While at it, add a `.gitignore` file. * q6voiced: port to "regular" ALSA. Tinyalsa is an Android library not packaged in Debian. As it wouldn't have any other user and can easily be replaced with the more usual `libasound`, "port" `q6voiced` to the usual ALSA lib. * q6voiced: add wrapper script and systemd service. As we'd rather not ship device-specific config files, let's create a wrapper script for `q6voiced` which will auto-detect the underlying device and pass the correct parameters to `q6voiced`. The latter is therefore patched to be installed to `/usr/libexec`, leaving `/usr/bin` free for our wrapper. Also add a systemd service so it can start automatically. * scripts: add linting (with shellcheck) as unit test. In order to ensure a reasonably good code quality for our shell scripts, add a shellcheck-based unit test. This is implemented through meson, and therefore requires a few adjustments to `d/rules` in addition to build dependencies. Take this opportunity to fix the errors reported in our scripts. Checksums-Sha1: 59030a0447ca14fbd2a2ac26369b1365e9edccb8 8424 qcom-phone-utils-dbgsym_0.4.0_armhf.deb 301c7a83ec8a9a3361297ee80018bfc6a5aeeda1 6028 qcom-phone-utils_0.4.0_armhf.buildinfo 7027655b6b86d503189fca63ab87b2978db9acee 16328 qcom-phone-utils_0.4.0_armhf.deb Checksums-Sha256: 6450f77f7bafb80f3542e4b9bdc96f24bede84e1e9ebe8e921b30b5bc624d134 8424 qcom-phone-utils-dbgsym_0.4.0_armhf.deb 0910ee61595875144d94f4fec42d0c963c087a4ef91b0246b016e5d4ef7b758b 6028 qcom-phone-utils_0.4.0_armhf.buildinfo ced43cf31e6290ae8e926c9c4f8e8eb9c7e63167c10a4a1beef795025bc7f689 16328 qcom-phone-utils_0.4.0_armhf.deb Files: 3dd78e9983eb125f8088b1171a019e31 8424 debug optional qcom-phone-utils-dbgsym_0.4.0_armhf.deb 13d45e8acd64f6883a2c4b39d15dfe80 6028 misc optional qcom-phone-utils_0.4.0_armhf.buildinfo 57dde068d43eb02f0cdedc8a7eb7ba3f 16328 misc optional qcom-phone-utils_0.4.0_armhf.deb Mon Feb 24 19:45:14 UTC 2025 I: diffoscope 289 will be used to compare the two builds: Running as unit: rb-diffoscope-armhf_7-8085.service # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.DMakXqU0/qcom-phone-utils_0.4.0.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.DMakXqU0/qcom-phone-utils_0.4.0.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.DMakXqU0/qcom-phone-utils_0.4.0.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.DMakXqU0/b1/qcom-phone-utils_0.4.0_armhf.changes /srv/reproducible-results/rbuild-debian/r-b-build.DMakXqU0/b2/qcom-phone-utils_0.4.0_armhf.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call diffoscope.comparators.binary.FilesystemFile ## main (total time: 0.004s) 0.004s 2 calls outputs 0.000s 1 call cleanup Finished with result: success Main processes terminated with: code=exited/status=0 Service runtime: 234ms CPU time consumed: 234ms Mon Feb 24 19:45:15 UTC 2025 I: diffoscope 289 found no differences in the changes files, and a .buildinfo file also exists. Mon Feb 24 19:45:15 UTC 2025 I: qcom-phone-utils from trixie built successfully and reproducibly on armhf. Mon Feb 24 19:45:15 UTC 2025 I: Submitting .buildinfo files to external archives: Mon Feb 24 19:45:16 UTC 2025 I: Submitting 8.0K b1/qcom-phone-utils_0.4.0_armhf.buildinfo.asc Mon Feb 24 19:45:18 UTC 2025 I: Submitting 8.0K b2/qcom-phone-utils_0.4.0_armhf.buildinfo.asc Mon Feb 24 19:45:20 UTC 2025 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Mon Feb 24 19:45:20 UTC 2025 I: Done submitting .buildinfo files. Mon Feb 24 19:45:20 UTC 2025 I: Removing signed qcom-phone-utils_0.4.0_armhf.buildinfo.asc files: removed './b1/qcom-phone-utils_0.4.0_armhf.buildinfo.asc' removed './b2/qcom-phone-utils_0.4.0_armhf.buildinfo.asc'